API tools faq
paste
Guest User

Untitled

a guest
Feb 18th, 2018
75
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.50 KB | None | 0 0
raw download clone embed print report
  1. === START OF INFORMATION SECTION ===
  2. Model Family: Western Digital Caviar Green
  3. Device Model: WDC WD20EADS-00R6B0
  4. Serial Number: WD-WCAVY0391904
  5. LU WWN Device Id: 5 0014ee 2ad97da27
  6. Firmware Version: 01.00A01
  7. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  8. Sector Size: 512 bytes logical/physical
  9. Device is: In smartctl database [for details use: -P show]
  10. ATA Version is: 8
  11. ATA Standard is: Exact ATA specification draft version not indicated
  12. Local Time is: Mon Oct 24 15:07:07 2011 MSK
  13. SMART support is: Available - device has SMART capability.
  14. SMART support is: Enabled
  15.  
  16. === START OF READ SMART DATA SECTION ===
  17. SMART overall-health self-assessment test result: PASSED
  18.  
  19. General SMART Values:
  20. Offline data collection status: (0x85) Offline data collection activity
  21. was aborted by an interrupting command from host.
  22. Auto Offline Data Collection: Enabled.
  23. Self-test execution status: ( 241) Self-test routine in progress...
  24. 10% of test remaining.
  25. Total time to complete Offline
  26. data collection: (43200) seconds.
  27. Offline data collection
  28. capabilities: (0x7b) SMART execute Offline immediate.
  29. Auto Offline data collection on/off support.
  30. Suspend Offline collection upon new
  31. command.
  32. Offline surface scan supported.
  33. Self-test supported.
  34. Conveyance Self-test supported.
  35. Selective Self-test supported.
  36. SMART capabilities: (0x0003) Saves SMART data before entering
  37. power-saving mode.
  38. Supports SMART auto save timer.
  39. Error logging capability: (0x01) Error logging supported.
  40. General Purpose Logging supported.
  41. Short self-test routine
  42. recommended polling time: ( 2) minutes.
  43. Extended self-test routine
  44. recommended polling time: ( 255) minutes.
  45. Conveyance self-test routine
  46. recommended polling time: ( 5) minutes.
  47. SCT capabilities: (0x303f) SCT Status supported.
  48. SCT Error Recovery Control supported.
  49. SCT Feature Control supported.
  50. SCT Data Table supported.
  51.  
  52. SMART Attributes Data Structure revision number: 16
  53. Vendor Specific SMART Attributes with Thresholds:
  54. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  55. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1
  56. 3 Spin_Up_Time 0x0027 186 142 021 Pre-fail Always - 7683
  57. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 417
  58. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  59. 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
  60. 9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 16702
  61. 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  62. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  63. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 336
  64. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 216
  65. 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 1395751
  66. 194 Temperature_Celsius 0x0022 119 102 000 Old_age Always - 33
  67. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  68. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 3
  69. 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 3
  70. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 2
  71. 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
  72.  
  73. SMART Error Log Version: 1
  74. Warning: ATA error count 53 inconsistent with error log pointer 1
  75.  
  76. ATA Error Count: 53 (device log contains only the most recent five errors)
  77. CR = Command Register [HEX]
  78. FR = Features Register [HEX]
  79. SC = Sector Count Register [HEX]
  80. SN = Sector Number Register [HEX]
  81. CL = Cylinder Low Register [HEX]
  82. CH = Cylinder High Register [HEX]
  83. DH = Device/Head Register [HEX]
  84. DC = Device Command Register [HEX]
  85. ER = Error register [HEX]
  86. ST = Status register [HEX]
  87. Powered_Up_Time is measured from power on, and printed as
  88. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  89. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  90.  
  91. Error 53 occurred at disk power-on lifetime: 12084 hours (503 days + 12 hours)
  92. When the command that caused the error occurred, the device was active or idle.
  93.  
  94. After command completion occurred, registers were:
  95. ER ST SC SN CL CH DH
  96. -- -- -- -- -- -- --
  97. 40 51 00 0d 78 1d 40 Error: UNC at LBA = 0x001d780d = 1931277
  98.  
  99. Commands leading to the command that caused the error were:
  100. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  101. -- -- -- -- -- -- -- -- ---------------- --------------------
  102. c8 00 00 00 78 1d 00 00 01:44:10.262 READ DMA
  103. ca 00 10 00 02 00 00 00 01:44:10.261 WRITE DMA
  104. c8 00 0a 7a 02 36 00 00 01:44:10.254 READ DMA
  105.  
  106. Error 52 occurred at disk power-on lifetime: 12084 hours (503 days + 12 hours)
  107. When the command that caused the error occurred, the device was active or idle.
  108.  
  109. After command completion occurred, registers were:
  110. ER ST SC SN CL CH DH
  111. -- -- -- -- -- -- --
  112. 40 51 00 37 78 1d 40 Error: UNC at LBA = 0x001d7837 = 1931319
  113.  
  114. Commands leading to the command that caused the error were:
  115. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  116. -- -- -- -- -- -- -- -- ---------------- --------------------
  117. c8 00 00 00 78 1d 00 00 01:44:05.104 READ DMA
  118. c8 00 00 00 76 1d 00 00 01:44:05.090 READ DMA
  119. c8 00 00 00 ae 1c 00 00 01:44:05.089 READ DMA
  120. c8 00 00 00 ad 1c 00 00 01:44:05.088 READ DMA
  121. c8 00 00 00 ac 1c 00 00 01:44:05.087 READ DMA
  122.  
  123. Error 51 occurred at disk power-on lifetime: 12084 hours (503 days + 12 hours)
  124. When the command that caused the error occurred, the device was active or idle.
  125.  
  126. After command completion occurred, registers were:
  127. ER ST SC SN CL CH DH
  128. -- -- -- -- -- -- --
  129. 40 51 00 00 e2 10 40 Error: UNC at LBA = 0x0010e200 = 1106432
  130.  
  131. Commands leading to the command that caused the error were:
  132. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  133. -- -- -- -- -- -- -- -- ---------------- --------------------
  134. c8 00 00 00 e2 10 00 00 01:43:32.640 READ DMA
  135. ca 00 10 00 02 00 00 00 01:43:32.637 WRITE DMA
  136. c8 00 10 00 02 00 00 00 01:43:32.604 READ DMA
  137.  
  138. Error 50 occurred at disk power-on lifetime: 12084 hours (503 days + 12 hours)
  139. When the command that caused the error occurred, the device was active or idle.
  140.  
  141. After command completion occurred, registers were:
  142. ER ST SC SN CL CH DH
  143. -- -- -- -- -- -- --
  144. 40 51 00 00 e2 10 40 Error: UNC at LBA = 0x0010e200 = 1106432
  145.  
  146. Commands leading to the command that caused the error were:
  147. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  148. -- -- -- -- -- -- -- -- ---------------- --------------------
  149. c8 00 00 00 e2 10 00 00 01:43:29.345 READ DMA
  150. c8 00 00 00 b4 10 00 00 01:43:29.329 READ DMA
  151. c8 00 00 00 36 e9 01 00 01:43:29.323 READ DMA
  152. c8 00 00 00 32 e9 01 00 01:43:29.318 READ DMA
  153. c8 00 00 00 2e e9 01 00 01:43:29.317 READ DMA
  154.  
  155. Error 49 occurred at disk power-on lifetime: 12084 hours (503 days + 12 hours)
  156. When the command that caused the error occurred, the device was active or idle.
  157.  
  158. After command completion occurred, registers were:
  159. ER ST SC SN CL CH DH
  160. -- -- -- -- -- -- --
  161. 40 51 00 00 e2 10 40 Error: UNC at LBA = 0x0010e200 = 1106432
  162.  
  163. Commands leading to the command that caused the error were:
  164. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  165. -- -- -- -- -- -- -- -- ---------------- --------------------
  166. c8 00 00 00 e2 10 00 00 01:23:27.435 READ DMA
  167. c8 00 00 00 2f 05 00 00 01:23:27.434 READ DMA
  168. c8 00 00 00 2e 05 00 00 01:23:27.431 READ DMA
  169. c8 00 00 00 58 04 00 00 01:23:27.430 READ DMA
  170. c8 00 00 00 57 04 00 00 01:23:27.429 READ DMA
  171.  
  172. SMART Self-test log structure revision number 1
  173. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  174. # 1 Short offline Completed without error 00% 16593 -
  175. # 2 Short offline Completed without error 00% 16545 -
  176. # 3 Short offline Completed without error 00% 16474 -
  177. # 4 Short offline Completed without error 00% 16407 -
  178. # 5 Short offline Completed: read failure 90% 16347 3526265329
  179. # 6 Short offline Completed: read failure 10% 16287 3526275662
  180. # 7 Short offline Completed: read failure 90% 16168 3526265329
  181. # 8 Short offline Completed: read failure 10% 16070 3526275662
  182. # 9 Short offline Completed: read failure 90% 16010 3526265329
  183. #10 Short offline Completed: read failure 10% 15923 3526275662
  184. #11 Short offline Completed: read failure 10% 15863 3526275662
  185. #12 Short offline Completed: read failure 90% 15803 3526265329
  186. #13 Short offline Completed: read failure 90% 15743 3526265329
  187. #14 Short offline Completed: read failure 90% 15683 3526265329
  188. #15 Short offline Completed without error 00% 15624 -
  189. #16 Short offline Completed: read failure 10% 15506 3526275662
  190. #17 Short offline Completed: read failure 90% 15446 3526265329
  191. #18 Short offline Completed: read failure 10% 15386 3526275662
  192. #19 Short offline Completed: read failure 10% 15342 3526266601
  193. #20 Short offline Completed without error 00% 15270 -
  194. #21 Short offline Completed without error 00% 15188 -
  195.  
  196. SMART Selective self-test log data structure revision number 1
  197. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  198. 1 0 0 Not_testing
  199. 2 0 0 Not_testing
  200. 3 0 0 Not_testing
  201. 4 0 0 Not_testing
  202. 5 0 0 Not_testing
  203. Selective self-test flags (0x0):
  204. After scanning selected spans, do NOT read-scan remainder of disk.
  205. If Selective self-test is pending on power-up, resume after 0 minute delay.
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!