Guest User

sudo wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.co

a guest
May 4th, 2019
81
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. pi@raspberrypi:~$ sudo wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -i wlan0 -d
  2. wpa_supplicant v2.4
  3. random: Trying to read entropy from /dev/random
  4. Successfully initialized wpa_supplicant
  5. Initializing interface 'wlan0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A'
  6. Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
  7. Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
  8. ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=netdev'
  9. update_config=1
  10. country='NL'
  11. Priority group 0
  12. id=0 ssid='Broek_uit!'
  13. rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
  14. rfkill: initial event: idx=1 type=2 op=0 soft=0 hard=0
  15. nl80211: TDLS supported
  16. nl80211: Supported cipher 00-0f-ac:1
  17. nl80211: Supported cipher 00-0f-ac:5
  18. nl80211: Supported cipher 00-0f-ac:2
  19. nl80211: Supported cipher 00-0f-ac:4
  20. nl80211: Using driver-based off-channel TX
  21. nl80211: Supported vendor command: vendor_id=0x1018 subcmd=1
  22. nl80211: Use separate P2P group interface (driver advertised support)
  23. nl80211: use P2P_DEVICE support
  24. nl80211: interface wlan0 in phy phy0
  25. nl80211: Set mode ifindex 3 iftype 2 (STATION)
  26. nl80211: Subscribe to mgmt frames with non-AP handle 0x9b88a0
  27. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=040a
  28. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  29. nl80211: Register frame match - hexdump(len=2): 04 0a
  30. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=040b
  31. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  32. nl80211: Register frame match - hexdump(len=2): 04 0b
  33. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=040c
  34. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  35. nl80211: Register frame match - hexdump(len=2): 04 0c
  36. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=040d
  37. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  38. nl80211: Register frame match - hexdump(len=2): 04 0d
  39. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=090a
  40. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  41. nl80211: Register frame match - hexdump(len=2): 09 0a
  42. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=090b
  43. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  44. nl80211: Register frame match - hexdump(len=2): 09 0b
  45. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=090c
  46. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  47. nl80211: Register frame match - hexdump(len=2): 09 0c
  48. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=090d
  49. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  50. nl80211: Register frame match - hexdump(len=2): 09 0d
  51. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=0409506f9a09
  52. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  53. nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09
  54. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=7f506f9a09
  55. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  56. nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09
  57. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=0801
  58. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  59. nl80211: Register frame match - hexdump(len=2): 08 01
  60. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=040e
  61. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  62. nl80211: Register frame match - hexdump(len=2): 04 0e
  63. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=06
  64. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  65. nl80211: Register frame match - hexdump(len=1): 06
  66. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=0a07
  67. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  68. nl80211: Register frame match - hexdump(len=2): 0a 07
  69. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=0a11
  70. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  71. nl80211: Register frame match - hexdump(len=2): 0a 11
  72. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=1101
  73. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  74. nl80211: Register frame match - hexdump(len=2): 11 01
  75. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=1102
  76. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  77. nl80211: Register frame match - hexdump(len=2): 11 02
  78. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x9b88a0 match=0505
  79. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  80. nl80211: Register frame match - hexdump(len=2): 05 05
  81. nl80211: Failed to register Action frame processing - ignore for now
  82. netlink: Operstate: ifindex=3 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
  83. nl80211: driver param='(null)'
  84. Add interface wlan0 to a new radio phy0
  85. nl80211: Regulatory information - country=NL (DFS-ETSI)
  86. nl80211: 2402-2482 @ 40 MHz 20 mBm
  87. nl80211: 5170-5250 @ 80 MHz 20 mBm (no outdoor)
  88. nl80211: 5250-5330 @ 80 MHz 20 mBm (no outdoor) (DFS)
  89. nl80211: 5490-5710 @ 160 MHz 27 mBm (DFS)
  90. nl80211: 5725-5875 @ 80 MHz 13 mBm
  91. nl80211: 57000-66000 @ 2160 MHz 40 mBm
  92. nl80211: Added 802.11b mode based on 802.11g information
  93. wlan0: Own MAC address: 0e:5b:b8:38:7d:ac
  94. wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
  95. wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
  96. wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
  97. wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
  98. wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0
  99. wpa_driver_nl80211_set_key: ifindex=3 (wlan0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0
  100. wlan0: RSN: flushing PMKID list in the driver
  101. nl80211: Flush PMKIDs
  102. TDLS: TDLS operation supported by driver
  103. TDLS: Driver uses internal link setup
  104. TDLS: Driver does not support TDLS channel switching
  105. wlan0: WPS: UUID based on MAC address: 2364b09c-c449-59a1-b205-8557b567db59
  106. ENGINE: Loading dynamic engine
  107. ENGINE: Loading dynamic engine
  108. EAPOL: SUPP_PAE entering state DISCONNECTED
  109. EAPOL: Supplicant port status: Unauthorized
  110. nl80211: Skip set_supp_port(unauthorized) while not associated
  111. EAPOL: KEY_RX entering state NO_KEY_RECEIVE
  112. EAPOL: SUPP_BE entering state INITIALIZE
  113. EAP: EAP entering state DISABLED
  114. Using existing control interface directory.
  115. ctrl_interface_group=108 (from group name 'netdev')
  116. ctrl_iface bind(PF_UNIX) failed: Address already in use
  117. ctrl_iface exists and seems to be in use - cannot override it
  118. Delete '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
  119. Failed to initialize control interface 'DIR=/var/run/wpa_supplicant GROUP=netdev'.
  120. You may have another wpa_supplicant process already running or the file was
  121. left by an unclean termination of wpa_supplicant in which case you will need
  122. to manually remove this file before starting wpa_supplicant again.
  123.  
  124. Failed to add interface wlan0
  125. wlan0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 state=DISCONNECTED
  126. TDLS: Tear down peers
  127. wlan0: State: DISCONNECTED -> DISCONNECTED
  128. nl80211: Set wlan0 operstate 0->0 (DORMANT)
  129. netlink: Operstate: ifindex=3 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
  130. EAPOL: External notification - portEnabled=0
  131. EAPOL: External notification - portValid=0
  132. wlan0: WPA: Clear old PMK and PTK
  133. wlan0: Cancelling delayed sched scan
  134. wlan0: Cancelling scan request
  135. wlan0: Cancelling authentication timeout
  136. Remove interface wlan0 from radio phy0
  137. Remove radio phy0
  138. nl80211: deinit ifname=wlan0 disabled_11b_rates=0
  139. nl80211: Remove monitor interface: refcount=0
  140. netlink: Operstate: ifindex=3 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP)
  141. nl80211: Set mode ifindex 3 iftype 2 (STATION)
  142. nl80211: Unsubscribe mgmt frames handle 0x88130029 (mode change)
RAW Paste Data