SHARE
TWEET

rock

a guest Oct 21st, 2019 92 in 4 days
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Booting Linux on physical CPU 0x0
  2. [    0.000000] Initializing cgroup subsys cpuset
  3. [    0.000000] Initializing cgroup subsys cpu
  4. [    0.000000] Initializing cgroup subsys cpuacct
  5. [    0.000000] Linux version 4.4.196 (adam@adam-vb) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08) ) #1 SMP Tue Oct 15 16:54:21 EDT 2019
  6. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  7. [    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
  8. [    0.000000] bootconsole [uart0] enabled
  9. [    0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
  10. [    0.000000] On node 0 totalpages: 1015296
  11. [    0.000000]   DMA zone: 15864 pages used for memmap
  12. [    0.000000]   DMA zone: 0 pages reserved
  13. [    0.000000]   DMA zone: 1015296 pages, LIFO batch:31
  14. [    0.000000] psci: probing for conduit method from DT.
  15. [    0.000000] psci: PSCIv1.0 detected in firmware.
  16. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  17. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  18. [    0.000000] PERCPU: Embedded 20 pages/cpu @ffffffc0f7ed8000 s41960 r8192 d31768 u81920
  19. [    0.000000] pcpu-alloc: s41960 r8192 d31768 u81920 alloc=20*4096
  20. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  21. [    0.000000] Detected VIPT I-cache on CPU0
  22. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  23. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 999432
  24. [    0.000000] Kernel command line: console=ttyS2,1500000n8 rw root=/dev/mmcblk1p2 rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_pool=1M ethaddr=5a:98:a4:f2:c2:c2 eth1addr=5a:98:a4:f2:c2:e2 serial=e3a9722720756b9 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 zswap.enabled=1 video=HDMI-A-1:1920x1080@60 video=eDP-1:1920x1080@60 quiet loglevel=3 vga=current earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 usbcore.autosuspend=-1 net.ifnames=0
  25. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  26. [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  27. [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  28. [    0.000000] software IO TLB: mapped [mem 0xf7e90000-0xf7ed0000] (0MB)
  29. [    0.000000] Memory: 3961900K/4061184K available (15614K kernel code, 2182K rwdata, 6152K rodata, 1216K init, 744K bss, 99284K reserved, 0K cma-reserved)
  30. [    0.000000] Virtual kernel memory layout:
  31.                    modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  32.                    vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
  33.                      .init : 0xffffff80095d0000 - 0xffffff8009700000   (  1216 KB)
  34.                      .text : 0xffffff8008080000 - 0xffffff8008fc0000   ( 15616 KB)
  35.                    .rodata : 0xffffff8008fc0000 - 0xffffff80095d0000   (  6208 KB)
  36.                      .data : 0xffffff8009700000 - 0xffffff8009921808   (  2183 KB)
  37.                    vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
  38.                              0xffffffbdc0008000 - 0xffffffbdc3e00000   (    61 MB actual)
  39.                    fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
  40.                    PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
  41.                    memory  : 0xffffffc000200000 - 0xffffffc0f8000000   (  3966 MB)
  42. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  43. [    0.000000] Hierarchical RCU implementation.
  44. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  45. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  46. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  47. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  48. [    0.000000] GIC: Using split EOI/Deactivate mode
  49. [    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
  50. [    0.000000] ITS: allocated 65536 Devices @f3080000 (psz 64K, shr 0)
  51. [    0.000000] ITS: using cache flushing for cmd queue
  52. [    0.000000] GIC: using LPI property table @0x00000000f3010000
  53. [    0.000000] ITS: Allocated 1792 chunks for LPIs
  54. [    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
  55. [    0.000000] CPU0: using LPI pending table @0x00000000f3020000
  56. [    0.000000] GIC: using cache flushing for LPI property table
  57. [    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  58. [    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  59. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  60. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  61. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  62. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  63. [    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
  64. [    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
  65. [    0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
  66. [    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  67. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  68. [    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  69. [    0.001467] Console: colour dummy device 80x25
  70. [    0.001493] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
  71. [    0.001506] pid_max: default: 32768 minimum: 301
  72. [    0.001654] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  73. [    0.001666] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  74. [    0.002454] Initializing cgroup subsys memory
  75. [    0.002487] Initializing cgroup subsys devices
  76. [    0.002501] Initializing cgroup subsys freezer
  77. [    0.002518] Initializing cgroup subsys net_cls
  78. [    0.002531] Initializing cgroup subsys net_prio
  79. [    0.002559] ftrace: allocating 55023 entries in 215 pages
  80. [    0.145066] sched-energy: Sched-energy-costs installed from DT
  81. [    0.145085] CPU0: update cpu_capacity 401
  82. [    0.145142] ASID allocator initialised with 32768 entries
  83. [    0.149057] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  84. [    0.149618] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  85. [    0.150996] Detected VIPT I-cache on CPU1
  86. [    0.151030] CPU1: found redistributor 1 region 0:0x00000000fef20000
  87. [    0.151060] CPU1: using LPI pending table @0x00000000f32e0000
  88. [    0.151104] CPU1: update cpu_capacity 401
  89. [    0.151108] CPU1: Booted secondary processor [410fd034]
  90. [    0.151656] Detected VIPT I-cache on CPU2
  91. [    0.151677] CPU2: found redistributor 2 region 0:0x00000000fef40000
  92. [    0.151704] CPU2: using LPI pending table @0x00000000f3310000
  93. [    0.151731] CPU2: update cpu_capacity 401
  94. [    0.151734] CPU2: Booted secondary processor [410fd034]
  95. [    0.152280] Detected VIPT I-cache on CPU3
  96. [    0.152301] CPU3: found redistributor 3 region 0:0x00000000fef60000
  97. [    0.152328] CPU3: using LPI pending table @0x00000000f3360000
  98. [    0.152354] CPU3: update cpu_capacity 401
  99. [    0.152358] CPU3: Booted secondary processor [410fd034]
  100. [    0.152896] Detected PIPT I-cache on CPU4
  101. [    0.152925] CPU4: found redistributor 100 region 0:0x00000000fef80000
  102. [    0.152963] CPU4: using LPI pending table @0x00000000f3390000
  103. [    0.153001] CPU4: update cpu_capacity 1024
  104. [    0.153004] CPU4: Booted secondary processor [410fd082]
  105. [    0.153560] Detected PIPT I-cache on CPU5
  106. [    0.153580] CPU5: found redistributor 101 region 0:0x00000000fefa0000
  107. [    0.153616] CPU5: using LPI pending table @0x00000000f33d0000
  108. [    0.153643] CPU5: update cpu_capacity 1024
  109. [    0.153647] CPU5: Booted secondary processor [410fd082]
  110. [    0.153735] Brought up 6 CPUs
  111. [    0.153819] SMP: Total of 6 processors activated.
  112. [    0.153828] CPU features: detected feature: GIC system register CPU interface
  113. [    0.153836] CPU features: detected feature: 32-bit EL0 Support
  114. [    0.153848] CPU: All CPU(s) started at EL2
  115. [    0.153895] alternatives: patching kernel code
  116. [    0.155340] devtmpfs: initialized
  117. [    0.173948] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  118. [    0.173970] futex hash table entries: 2048 (order: 5, 131072 bytes)
  119. [    0.174459] xor: measuring software checksum speed
  120. [    0.184239]    8regs     :  2856.000 MB/sec
  121. [    0.194298]    8regs_prefetch:  2564.000 MB/sec
  122. [    0.204355]    32regs    :  3200.000 MB/sec
  123. [    0.214412]    32regs_prefetch:  2844.000 MB/sec
  124. [    0.214419] xor: using function: 32regs (3200.000 MB/sec)
  125. [    0.214441] pinctrl core: initialized pinctrl subsystem
  126. [    0.214669] regulator-dummy: no parameters
  127. [    0.216475] NET: Registered protocol family 16
  128. [    0.221147] cpuidle: using governor ladder
  129. [    0.225168] cpuidle: using governor menu
  130. [    0.225973] vdso: 2 pages (1 code @ ffffff8008fc6000, 1 data @ ffffff8009704000)
  131. [    0.226005] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  132. [    0.226543] DMA: preallocated 1024 KiB pool for atomic allocations
  133. [    0.241681] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0
  134. [    0.241756] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1
  135. [    0.241831] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2
  136. [    0.241901] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio3
  137. [    0.241975] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio4
  138. [    0.302013] raid6: int64x1  gen()   453 MB/s
  139. [    0.319054] raid6: int64x1  xor()   402 MB/s
  140. [    0.336132] raid6: int64x2  gen()   769 MB/s
  141. [    0.353235] raid6: int64x2  xor()   582 MB/s
  142. [    0.370339] raid6: int64x4  gen()  1117 MB/s
  143. [    0.387456] raid6: int64x4  xor()   666 MB/s
  144. [    0.404556] raid6: int64x8  gen()   863 MB/s
  145. [    0.421633] raid6: int64x8  xor()   628 MB/s
  146. [    0.438735] raid6: neonx1   gen()   925 MB/s
  147. [    0.455824] raid6: neonx1   xor()   648 MB/s
  148. [    0.472944] raid6: neonx2   gen()  1574 MB/s
  149. [    0.490009] raid6: neonx2   xor()   996 MB/s
  150. [    0.507111] raid6: neonx4   gen()  2089 MB/s
  151. [    0.524206] raid6: neonx4   xor()  1160 MB/s
  152. [    0.541312] raid6: neonx8   gen()  1703 MB/s
  153. [    0.558413] raid6: neonx8   xor()  1259 MB/s
  154. [    0.558419] raid6: using algorithm neonx4 gen() 2089 MB/s
  155. [    0.558424] raid6: .... xor() 1160 MB/s, rmw enabled
  156. [    0.558430] raid6: using intx1 recovery algorithm
  157. [    0.558966] ACPI: Interpreter disabled.
  158. [    0.559482] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[0]' - status (0)
  159. [    0.559522] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[1]' - status (0)
  160. [    0.559814] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-sys[0]'
  161. [    0.559841] vcc_sys: 5000 mV
  162. [    0.560017] reg-fixed-voltage vcc-sys: vcc_sys supplying 5000000uV
  163. [    0.560068] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-sys[0]'
  164. [    0.560086] reg-fixed-voltage vcc3v3-sys: Looking up vin-supply from device tree
  165. [    0.560136] vcc3v3_sys: supplied by vcc_sys
  166. [    0.560145] vcc_sys: could not add device link regulator.2 err -2
  167. [    0.560184] vcc3v3_sys: 3300 mV
  168. [    0.560327] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV
  169. [    0.560493] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc5v0-host-regulator[0]'
  170. [    0.560550] of_get_named_gpiod_flags: parsed 'gpios' property of node '/vcc5v0-host-regulator[0]' - status (0)
  171. [    0.560587] of_get_named_gpiod_flags: parsed 'gpios' property of node '/vcc5v0-host-regulator[1]' - status (0)
  172. [    0.560647] vcc5v0_host: no parameters
  173. [    0.560812] reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 0uV
  174. [    0.560941] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-lcd-en-regulator[0]' - status (0)
  175. [    0.560979] reg-fixed-voltage vcc-lcd-en-regulator: Looking up vin-supply from device tree
  176. [    0.561016] vcc_lcd_en: supplied by vcc3v3_sys
  177. [    0.561024] vcc3v3_sys: could not add device link regulator.4 err -2
  178. [    0.561064] vcc_lcd_en: at 3300 mV
  179. [    0.561210] reg-fixed-voltage vcc-lcd-en-regulator: vcc_lcd_en supplying 0uV
  180. [    0.561271] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-sdio[0]'
  181. [    0.561289] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  182. [    0.561303] vcc1v8_sdio: unable to resolve supply
  183. [    0.561311] vcc1v8_sdio: 1800 mV
  184. [    0.561434] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  185. [    0.561448] vcc1v8_sdio: regulator get failed, ret=-517
  186. [    0.561459] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  187. [    0.561472] vcc1v8_sdio: unable to resolve supply
  188. [    0.561481] reg-fixed-voltage vcc1v8-sdio: vcc1v8_sdio supplying 1800000uV
  189. [    0.561601] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc3v0-sdio[0]' - status (0)
  190. [    0.561646] reg-fixed-voltage vcc3v0-sdio: Looking up vin-supply from device tree
  191. [    0.561683] vcc3v0_sdio: supplied by vcc3v3_sys
  192. [    0.561703] vcc3v3_sys: could not add device link regulator.6 err -2
  193. [    0.561747] vcc3v0_sdio: 3000 mV
  194. [    0.561899] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  195. [    0.561915] vcc1v8_sdio: unable to resolve supply
  196. [    0.561924] reg-fixed-voltage vcc3v0-sdio: vcc3v0_sdio supplying 3000000uV
  197. [    0.562559] iommu: Adding device ff650000.vpu_service to group 0
  198. [    0.562640] iommu: Adding device ff660000.rkvdec to group 1
  199. [    0.562763] iommu: Adding device ff8f0000.vop to group 2
  200. [    0.562853] iommu: Adding device ff900000.vop to group 3
  201. [    0.564300] SCSI subsystem initialized
  202. [    0.564458] libata version 3.00 loaded.
  203. [    0.564642] usbcore: registered new interface driver usbfs
  204. [    0.564686] usbcore: registered new interface driver hub
  205. [    0.564786] usbcore: registered new device driver usb
  206. [    0.564917] media: Linux media interface: v0.10
  207. [    0.564950] Linux video capture interface: v2.00
  208. [    0.565055] pps_core: LinuxPPS API ver. 1 registered
  209. [    0.565061] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  210. [    0.565081] PTP clock support registered
  211. [    0.566365] Advanced Linux Sound Architecture Driver Initialized.
  212. [    0.566891] Bluetooth: Core ver 2.21
  213. [    0.566921] NET: Registered protocol family 31
  214. [    0.566927] Bluetooth: HCI device and connection manager initialized
  215. [    0.566938] Bluetooth: HCI socket layer initialized
  216. [    0.566948] Bluetooth: L2CAP socket layer initialized
  217. [    0.566982] Bluetooth: SCO socket layer initialized
  218. [    0.568666] clocksource: Switched to clocksource arch_sys_counter
  219. [    0.610044] FS-Cache: Loaded
  220. [    0.610245] pnp: PnP ACPI: disabled
  221. [    0.618737] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
  222. [    0.619006] NET: Registered protocol family 2
  223. [    0.619462] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  224. [    0.619740] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
  225. [    0.620554] TCP: Hash tables configured (established 32768 bind 32768)
  226. [    0.620695] UDP hash table entries: 2048 (order: 5, 196608 bytes)
  227. [    0.620853] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
  228. [    0.621268] NET: Registered protocol family 1
  229. [    0.621599] RPC: Registered named UNIX socket transport module.
  230. [    0.621606] RPC: Registered udp transport module.
  231. [    0.621611] RPC: Registered tcp transport module.
  232. [    0.621616] RPC: Registered tcp NFSv4.1 backchannel transport module.
  233. [    0.622283] PCI: CLS 0 bytes, default 64
  234. [    0.623462] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  235. [    0.623548] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  236. [    0.626933] Initialise system trusted keyring
  237. [    0.633228] zbud: loaded
  238. [    0.635325] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  239. [    0.636085] NFS: Registering the id_resolver key type
  240. [    0.636115] Key type id_resolver registered
  241. [    0.636121] Key type id_legacy registered
  242. [    0.636139] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  243. [    0.636813] fuse init (API version 7.23)
  244. [    0.637193] SGI XFS with security attributes, no debug enabled
  245. [    0.638769] aufs 4.4-20170911
  246. [    0.643128] NET: Registered protocol family 38
  247. [    0.643153] async_tx: api initialized (async)
  248. [    0.643173] Key type asymmetric registered
  249. [    0.643185] Asymmetric key parser 'x509' registered
  250. [    0.643375] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  251. [    0.643389] io scheduler noop registered
  252. [    0.643401] io scheduler deadline registered
  253. [    0.643536] io scheduler cfq registered (default)
  254. [    0.644581] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply from device tree
  255. [    0.644593] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
  256. [    0.644900] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up vbus-supply from device tree
  257. [    0.644913] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
  258. [    0.644928] phy phy-ff770000.syscon:usb2-phy@e460.0: Failed to get VBUS supply regulator
  259. [    0.645071] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply from device tree
  260. [    0.645169] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e460.1 err -2
  261. [    0.646673] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply from device tree
  262. [    0.646685] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply property in node /syscon@ff770000/phy@f780 failed
  263. [    0.647790] phy phy-ff800000.phy.3: Looking up phy-supply from device tree
  264. [    0.647802] phy phy-ff800000.phy.3: Looking up phy-supply property in node /phy@ff800000/dp-port failed
  265. [    0.647907] phy phy-ff800000.phy.4: Looking up phy-supply from device tree
  266. [    0.647917] phy phy-ff800000.phy.4: Looking up phy-supply property in node /phy@ff800000/usb3-port failed
  267. [    0.649345] of_get_named_gpiod_flags: parsed 'gpios' property of node '/dc-charger[0]' - status (0)
  268. [    0.649917] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree
  269. [    0.650063] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree
  270. [    0.650507] universal-charger usb-charger: GPIO lookup for consumer dc-det
  271. [    0.650516] universal-charger usb-charger: using device tree for GPIO lookup
  272. [    0.650525] of_get_named_gpiod_flags: can't parse 'dc-det-gpios' property of node '/usb-charger[0]'
  273. [    0.650534] of_get_named_gpiod_flags: can't parse 'dc-det-gpio' property of node '/usb-charger[0]'
  274. [    0.650541] universal-charger usb-charger: using lookup tables for GPIO lookup
  275. [    0.650549] universal-charger usb-charger: lookup for GPIO dc-det failed
  276. [    0.650557] universal-charger usb-charger: invalid dc det gpio!
  277. [    0.650577] universal-charger usb-charger: init usb failed!
  278. [    0.652063] pwm-backlight edp-backlight: GPIO lookup for consumer enable
  279. [    0.652073] pwm-backlight edp-backlight: using device tree for GPIO lookup
  280. [    0.652082] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/edp-backlight[0]'
  281. [    0.652090] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/edp-backlight[0]'
  282. [    0.652098] pwm-backlight edp-backlight: using lookup tables for GPIO lookup
  283. [    0.652105] pwm-backlight edp-backlight: lookup for GPIO enable failed
  284. [    0.652115] pwm-backlight edp-backlight: Looking up power-supply from device tree
  285. [    0.652413] rk-vcodec ff650000.vpu_service: Looking up vcodec-supply from device tree
  286. [    0.652423] rk-vcodec ff650000.vpu_service: Looking up vcodec-supply property in node /vpu_service@ff650000 failed
  287. [    0.652438] rk-vcodec ff650000.vpu_service: no regulator for vcodec
  288. [    0.652706] rk-vcodec ff650000.vpu_service: probe device
  289. [    0.652935] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
  290. [    0.653489] rk-vcodec ff650000.vpu_service: init success
  291. [    0.653719] rk-vcodec ff660000.rkvdec: Looking up vcodec-supply from device tree
  292. [    0.653730] rk-vcodec ff660000.rkvdec: Looking up vcodec-supply property in node /rkvdec@ff660000 failed
  293. [    0.653746] rk-vcodec ff660000.rkvdec: no regulator for vcodec
  294. [    0.654141] rk-vcodec ff660000.rkvdec: probe device
  295. [    0.654347] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
  296. [    0.654754] rk-vcodec ff660000.rkvdec: could not find power_model node
  297. [    0.654763] rk-vcodec ff660000.rkvdec: init success
  298. [    0.656559] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  299. [    0.656571] dma-pl330 ff6d0000.dma-controller:   DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  300. [    0.658047] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  301. [    0.658057] dma-pl330 ff6e0000.dma-controller:   DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  302. [    0.658495] pwm-regulator vdd-log: GPIO lookup for consumer enable
  303. [    0.658504] pwm-regulator vdd-log: using device tree for GPIO lookup
  304. [    0.658515] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log[0]'
  305. [    0.658523] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log[0]'
  306. [    0.658531] pwm-regulator vdd-log: using lookup tables for GPIO lookup
  307. [    0.658539] pwm-regulator vdd-log: lookup for GPIO enable failed
  308. [    0.658584] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  309. [    0.658698] pwm-regulator: supplied by vcc_sys
  310. [    0.658713] vcc_sys: could not add device link regulator.7 err -2
  311. [    0.658761] vdd_log: 800 <--> 1400 mV at 896 mV
  312. [    0.658961] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  313. [    0.658979] vcc1v8_sdio: unable to resolve supply
  314. [    0.659425] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  315. [    0.661168] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 35, base_baud = 1500000) is a 16550A
  316. [    0.661803] console [ttyS2] disabled
  317. [    0.661837] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 36, base_baud = 1500000) is a 16550A
  318. [    0.661870] console [ttyS2] enabled
  319. [    0.661875] bootconsole [uart0] disabled
  320. [    0.662988] [drm] Initialized drm 1.1.0 20060810
  321. [    0.666878] [drm] Rockchip DRM driver version: v1.0.1
  322. [    0.667404] usbcore: registered new interface driver udl
  323. [    0.668548] panel-simple edp-panel: Looking up power-supply from device tree
  324. [    0.669223] Unable to detect cache hierarchy for CPU 0
  325. [    0.669978] brd: module loaded
  326. [    0.675220] loop: module loaded
  327. [    0.675818] zram: Added device: zram0
  328. [    0.676184] lkdtm: No crash points registered, enable through debugfs
  329. [    0.677345] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
  330. [    0.678248] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  331. [    0.678254] e100: Copyright(c) 1999-2006 Intel Corporation
  332. [    0.678307] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  333. [    0.678313] e1000: Copyright (c) 1999-2006 Intel Corporation.
  334. [    0.678363] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  335. [    0.678369] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  336. [    0.678419] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
  337. [    0.678425] igb: Copyright (c) 2007-2014 Intel Corporation.
  338. [    0.678470] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
  339. [    0.678476] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
  340. [    0.679297] Atmel at76x USB Wireless LAN Driver 0.17 loading
  341. [    0.679355] usbcore: registered new interface driver at76c50x-usb
  342. [    0.679409] Broadcom 43xx driver loaded [ Features: PNL ]
  343. [    0.679571] usbcore: registered new interface driver zd1211rw
  344. [    0.679627] usbcore: registered new interface driver rtl8187
  345. [    0.679757] usbcore: registered new interface driver rtl8192cu
  346. [    0.680093] usbcore: registered new interface driver rtl8xxxu
  347. [    0.680147] usbcore: registered new interface driver rndis_wlan
  348. [    0.680205] usbcore: registered new interface driver usb8xxx
  349. [    0.680399] usbcore: registered new interface driver rt2500usb
  350. [    0.680449] usbcore: registered new interface driver rt73usb
  351. [    0.680499] usbcore: registered new interface driver rt2800usb
  352. [    0.680541] usbcore: registered new interface driver mt7601u
  353. [    0.680704] usbcore: registered new interface driver ath6kl_usb
  354. [    0.680748] usbcore: registered new interface driver ar5523
  355. [    0.680979] usbcore: registered new interface driver mwifiex_usb
  356. [    0.681052] usbcore: registered new interface driver brcmfmac
  357. [    0.681109] Rockchip WiFi SYS interface (V1.00) ...
  358. [    0.681178] usbcore: registered new interface driver rtl8150
  359. [    0.681221] usbcore: registered new interface driver r8152
  360. [    0.681268] usbcore: registered new interface driver asix
  361. [    0.681315] usbcore: registered new interface driver ax88179_178a
  362. [    0.681356] usbcore: registered new interface driver cdc_ether
  363. [    0.681400] usbcore: registered new interface driver rndis_host
  364. [    0.681465] usbcore: registered new interface driver cdc_ncm
  365. [    0.681507] usbcore: registered new interface driver cdc_mbim
  366. [    0.682987] rockchip-dwc3 usb0: failed to get drvdata dwc3
  367. [    0.687271] rockchip-dwc3 usb1: fail to get drvdata hcd
  368. [    0.688522] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  369. [    0.688543] ehci-pci: EHCI PCI platform driver
  370. [    0.688612] ehci-platform: EHCI generic platform driver
  371. [    0.692502] ehci-platform fe3c0000.usb: EHCI Host Controller
  372. [    0.692674] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
  373. [    0.692787] ehci-platform fe3c0000.usb: irq 29, io mem 0xfe3c0000
  374. [    0.698689] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  375. [    0.698853] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  376. [    0.698864] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  377. [    0.698872] usb usb1: Product: EHCI Host Controller
  378. [    0.698880] usb usb1: Manufacturer: Linux 4.4.196 ehci_hcd
  379. [    0.698887] usb usb1: SerialNumber: fe3c0000.usb
  380. [    0.699361] hub 1-0:1.0: USB hub found
  381. [    0.699392] hub 1-0:1.0: 1 port detected
  382. [    0.700004] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  383. [    0.700026] ohci-platform: OHCI generic platform driver
  384. [    0.700529] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  385. [    0.700713] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
  386. [    0.700802] ohci-platform fe3e0000.usb: irq 30, io mem 0xfe3e0000
  387. [    0.755816] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  388. [    0.755826] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  389. [    0.755834] usb usb2: Product: Generic Platform OHCI controller
  390. [    0.755842] usb usb2: Manufacturer: Linux 4.4.196 ohci_hcd
  391. [    0.755849] usb usb2: SerialNumber: fe3e0000.usb
  392. [    0.756299] hub 2-0:1.0: USB hub found
  393. [    0.756330] hub 2-0:1.0: 1 port detected
  394. [    0.757283] usbcore: registered new interface driver cdc_wdm
  395. [    0.757338] usbcore: registered new interface driver uas
  396. [    0.757420] usbcore: registered new interface driver usb-storage
  397. [    0.757462] usbcore: registered new interface driver ums-alauda
  398. [    0.757507] usbcore: registered new interface driver ums-cypress
  399. [    0.757550] usbcore: registered new interface driver ums-datafab
  400. [    0.757593] usbcore: registered new interface driver ums_eneub6250
  401. [    0.757635] usbcore: registered new interface driver ums-freecom
  402. [    0.757691] usbcore: registered new interface driver ums-isd200
  403. [    0.757734] usbcore: registered new interface driver ums-jumpshot
  404. [    0.757776] usbcore: registered new interface driver ums-karma
  405. [    0.757817] usbcore: registered new interface driver ums-onetouch
  406. [    0.757869] usbcore: registered new interface driver ums-realtek
  407. [    0.757912] usbcore: registered new interface driver ums-sddr09
  408. [    0.757954] usbcore: registered new interface driver ums-sddr55
  409. [    0.757995] usbcore: registered new interface driver ums-usbat
  410. [    0.758079] usbcore: registered new interface driver usbserial
  411. [    0.758115] usbcore: registered new interface driver usbserial_generic
  412. [    0.758144] usbserial: USB Serial support registered for generic
  413. [    0.758194] usbcore: registered new interface driver cp210x
  414. [    0.758221] usbserial: USB Serial support registered for cp210x
  415. [    0.758281] usbcore: registered new interface driver ftdi_sio
  416. [    0.758307] usbserial: USB Serial support registered for FTDI USB Serial Device
  417. [    0.758400] usbcore: registered new interface driver keyspan
  418. [    0.758426] usbserial: USB Serial support registered for Keyspan - (without firmware)
  419. [    0.758452] usbserial: USB Serial support registered for Keyspan 1 port adapter
  420. [    0.758480] usbserial: USB Serial support registered for Keyspan 2 port adapter
  421. [    0.758505] usbserial: USB Serial support registered for Keyspan 4 port adapter
  422. [    0.758553] usbcore: registered new interface driver option
  423. [    0.758579] usbserial: USB Serial support registered for GSM modem (1-port)
  424. [    0.758710] usbcore: registered new interface driver oti6858
  425. [    0.758737] usbserial: USB Serial support registered for oti6858
  426. [    0.758782] usbcore: registered new interface driver pl2303
  427. [    0.758811] usbserial: USB Serial support registered for pl2303
  428. [    0.758861] usbcore: registered new interface driver qcserial
  429. [    0.758887] usbserial: USB Serial support registered for Qualcomm USB modem
  430. [    0.758942] usbcore: registered new interface driver sierra
  431. [    0.758968] usbserial: USB Serial support registered for Sierra USB modem
  432. [    0.760267] usbcore: registered new interface driver iforce
  433. [    0.760883] usbcore: registered new interface driver xpad
  434. [    0.761313] usbcore: registered new interface driver usbtouchscreen
  435. [    0.761590] sensor_register_slave:mma8452,id=17
  436. [    0.761601] sensor_register_slave:lis3dh,id=7
  437. [    0.761610] sensor_register_slave:mma7660,id=18
  438. [    0.761619] sensor_register_slave:lsm303d,id=22
  439. [    0.761629] sensor_register_slave:mpu6880_acc,id=24
  440. [    0.761637] sensor_register_slave:mpu6500_acc,id=25
  441. [    0.761647] sensor_register_slave:lsm330_acc,id=26
  442. [    0.761675] sensor_register_slave:akm8975,id=30
  443. [    0.761685] sensor_register_slave:akm8963,id=31
  444. [    0.761694] sensor_register_slave:l3g4200d,id=45
  445. [    0.761702] sensor_register_slave:l3g20d,id=46
  446. [    0.761711] sensor_register_slave:ewtsa,id=47
  447. [    0.761720] sensor_register_slave:lsm330_gyro,id=51
  448. [    0.761730] sensor_register_slave:cm3217,id=53
  449. [    0.761738] sensor_register_slave:cm3218,id=54
  450. [    0.762416] i2c /dev entries driver
  451. [    0.763321] fan53555-regulator 0-0040: GPIO lookup for consumer vsel
  452. [    0.763330] fan53555-regulator 0-0040: using device tree for GPIO lookup
  453. [    0.763361] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr827@40[0]' - status (0)
  454. [    0.763736] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  455. [    0.763754] fan53555-regulator 0-0040: Looking up vin-supply from device tree
  456. [    0.763805] fan53555-reg: supplied by vcc_sys
  457. [    0.763814] vcc_sys: could not add device link regulator.8 err -2
  458. [    0.765176] vdd_cpu_b: 712 <--> 1400 mV at 1000 mV
  459. [    0.765544] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  460. [    0.765565] vcc1v8_sdio: unable to resolve supply
  461. [    0.765813] fan53555-regulator 0-0041: GPIO lookup for consumer vsel
  462. [    0.765822] fan53555-regulator 0-0041: using device tree for GPIO lookup
  463. [    0.765849] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr828@41[0]' - status (0)
  464. [    0.766195] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  465. [    0.766209] fan53555-regulator 0-0041: Looking up vin-supply from device tree
  466. [    0.766246] fan53555-reg: supplied by vcc_sys
  467. [    0.766254] vcc_sys: could not add device link regulator.9 err -2
  468. [    0.767761] vdd_gpu: 712 <--> 1200 mV at 1000 mV
  469. [    0.768114] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  470. [    0.768132] vcc1v8_sdio: unable to resolve supply
  471. [    0.768709] rk808 0-001b: Pmic Chip id: 0x0
  472. [    0.771755] rk808 0-001b: GPIO lookup for consumer dvs
  473. [    0.771764] rk808 0-001b: using device tree for GPIO lookup
  474. [    0.771775] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[0]'
  475. [    0.771784] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]'
  476. [    0.771792] rk808 0-001b: using lookup tables for GPIO lookup
  477. [    0.771799] rk808 0-001b: lookup for GPIO dvs failed
  478. [    0.771807] rk808-regulator rk808-regulator: there is no dvs0 gpio
  479. [    0.771814] rk808 0-001b: GPIO lookup for consumer dvs
  480. [    0.771821] rk808 0-001b: using device tree for GPIO lookup
  481. [    0.771829] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[1]'
  482. [    0.771837] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[1]'
  483. [    0.771843] rk808 0-001b: using lookup tables for GPIO lookup
  484. [    0.771850] rk808 0-001b: lookup for GPIO dvs failed
  485. [    0.771858] rk808-regulator rk808-regulator: there is no dvs1 gpio
  486. [    0.771899] rk808 0-001b: Looking up vcc1-supply from device tree
  487. [    0.771950] DCDC_REG1: supplied by vcc_sys
  488. [    0.771958] vcc_sys: could not add device link regulator.10 err -2
  489. [    0.772414] vdd_center: 750 <--> 1350 mV at 900 mV
  490. [    0.772620] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  491. [    0.772639] vcc1v8_sdio: unable to resolve supply
  492. [    0.772702] rk808 0-001b: Looking up vcc2-supply from device tree
  493. [    0.772738] DCDC_REG2: supplied by vcc_sys
  494. [    0.772747] vcc_sys: could not add device link regulator.11 err -2
  495. [    0.773040] vdd_cpu_l: 750 <--> 1250 mV at 900 mV
  496. [    0.773242] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  497. [    0.773261] vcc1v8_sdio: unable to resolve supply
  498. [    0.773300] rk808 0-001b: Looking up vcc3-supply from device tree
  499. [    0.773335] DCDC_REG3: supplied by vcc_sys
  500. [    0.773343] vcc_sys: could not add device link regulator.12 err -2
  501. [    0.773374] vcc_ddr: at 5000 mV
  502. [    0.773549] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  503. [    0.773567] vcc1v8_sdio: unable to resolve supply
  504. [    0.773611] rk808 0-001b: Looking up vcc4-supply from device tree
  505. [    0.773646] DCDC_REG4: supplied by vcc_sys
  506. [    0.773671] vcc_sys: could not add device link regulator.13 err -2
  507. [    0.773850] vcc_1v8: 1800 mV
  508. [    0.774048] reg-fixed-voltage vcc1v8-sdio: Looking up vin-supply from device tree
  509. [    0.774066] vcc1v8_sdio: supplied by vcc_1v8
  510. [    0.774141] rk808 0-001b: Looking up vcc6-supply from device tree
  511. [    0.774178] LDO_REG1: supplied by vcc_sys
  512. [    0.774186] vcc_sys: could not add device link regulator.14 err -2
  513. [    0.775021] vcc1v8_dvp: 1800 mV
  514. [    0.775260] rk808 0-001b: Looking up vcc6-supply from device tree
  515. [    0.775297] LDO_REG2: supplied by vcc_sys
  516. [    0.775305] vcc_sys: could not add device link regulator.15 err -2
  517. [    0.775478] LDO_REG2: at 1800 mV
  518. [    0.775734] rk808 0-001b: Looking up vcc7-supply from device tree
  519. [    0.775770] LDO_REG3: supplied by vcc_sys
  520. [    0.775778] vcc_sys: could not add device link regulator.16 err -2
  521. [    0.776470] vcc1v8_pmu: 1800 mV
  522. [    0.776721] rk808 0-001b: Looking up vcc9-supply from device tree
  523. [    0.776756] LDO_REG4: supplied by vcc_sys
  524. [    0.776764] vcc_sys: could not add device link regulator.17 err -2
  525. [    0.776952] vcc_sd: Bringing 3300000uV into 3000000-3000000uV
  526. [    0.777076] vcc_sd: ramp_delay not set
  527. [    0.777605] vcc_sd: 1800 <--> 3000 mV at 3000 mV
  528. [    0.777854] rk808 0-001b: Looking up vcc9-supply from device tree
  529. [    0.777890] LDO_REG5: supplied by vcc_sys
  530. [    0.777897] vcc_sys: could not add device link regulator.18 err -2
  531. [    0.778071] vcca3v0_codec: Bringing 1800000uV into 3000000-3000000uV
  532. [    0.778193] vcca3v0_codec: ramp_delay not set
  533. [    0.778835] vcca3v0_codec: 3000 mV
  534. [    0.779088] rk808 0-001b: Looking up vcc10-supply from device tree
  535. [    0.779124] LDO_REG6: supplied by vcc_sys
  536. [    0.779132] vcc_sys: could not add device link regulator.19 err -2
  537. [    0.779827] vcc_1v5: 1500 mV
  538. [    0.780079] rk808 0-001b: Looking up vcc7-supply from device tree
  539. [    0.780113] LDO_REG7: supplied by vcc_sys
  540. [    0.780121] vcc_sys: could not add device link regulator.20 err -2
  541. [    0.780815] vcca1v8_codec: 1800 mV
  542. [    0.781069] rk808 0-001b: Looking up vcc11-supply from device tree
  543. [    0.781105] LDO_REG8: supplied by vcc_sys
  544. [    0.781115] vcc_sys: could not add device link regulator.21 err -2
  545. [    0.781808] vcc_3v0: 3000 mV
  546. [    0.782065] rk808 0-001b: Looking up vcc8-supply from device tree
  547. [    0.782100] SWITCH_REG1: supplied by vcc3v3_sys
  548. [    0.782108] vcc3v3_sys: could not add device link regulator.22 err -2
  549. [    0.782136] vcc3v3_s3: at 3300 mV
  550. [    0.782356] rk808 0-001b: Looking up vcc12-supply from device tree
  551. [    0.782394] SWITCH_REG2: supplied by vcc_lcd_en
  552. [    0.782402] vcc_lcd_en: could not add device link regulator.23 err -2
  553. [    0.882706] vcc3v3_s0: at 3300 mV
  554. [    0.886471] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
  555. [    0.887021] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff8009c2c000
  556. [    0.888102] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff8009c2e000
  557. [    0.889357] fusb302 4-0022: GPIO lookup for consumer int-n
  558. [    0.889369] fusb302 4-0022: using device tree for GPIO lookup
  559. [    0.889410] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
  560. [    0.889446] fusb302 4-0022: GPIO lookup for consumer vbus-5v
  561. [    0.889456] fusb302 4-0022: using device tree for GPIO lookup
  562. [    0.889488] of_get_named_gpiod_flags: parsed 'vbus-5v-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
  563. [    0.889520] fusb302 4-0022: GPIO lookup for consumer vbus-other
  564. [    0.889529] fusb302 4-0022: using device tree for GPIO lookup
  565. [    0.889541] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  566. [    0.889552] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  567. [    0.889563] fusb302 4-0022: using lookup tables for GPIO lookup
  568. [    0.889574] fusb302 4-0022: lookup for GPIO vbus-other failed
  569. [    0.889585] fusb302 4-0022: GPIO lookup for consumer discharge
  570. [    0.889594] fusb302 4-0022: using device tree for GPIO lookup
  571. [    0.889604] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  572. [    0.889615] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  573. [    0.889625] fusb302 4-0022: using lookup tables for GPIO lookup
  574. [    0.889635] fusb302 4-0022: lookup for GPIO discharge failed
  575. [    0.898341] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
  576. [    0.930568] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
  577. [    0.930890] cw201x 4-0062: cw2015/cw2013 driver v1.2 probe sucess
  578. [    0.930938] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009c30000
  579. [    0.932588] lirc_dev: IR Remote Control driver registered, major 242
  580. [    0.932605] IR NEC protocol handler initialized
  581. [    0.932618] IR RC5(x/sz) protocol handler initialized
  582. [    0.932632] IR RC6 protocol handler initialized
  583. [    0.932646] IR JVC protocol handler initialized
  584. [    0.932679] IR Sony protocol handler initialized
  585. [    0.932694] IR SANYO protocol handler initialized
  586. [    0.932707] IR Sharp protocol handler initialized
  587. [    0.932722] IR MCE Keyboard/mouse protocol handler initialized
  588. [    0.932735] IR LIRC bridge handler initialized
  589. [    0.932749] IR XMP protocol handler initialized
  590. [    0.934259] usbcore: registered new interface driver uvcvideo
  591. [    0.934266] USB Video Class driver (1.1.1)
  592. [    0.935704] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
  593. [    0.935927] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
  594. [    0.937080] md: raid0 personality registered for level 0
  595. [    0.937098] md: raid1 personality registered for level 1
  596. [    0.937113] md: raid10 personality registered for level 10
  597. [    0.937403] md: raid6 personality registered for level 6
  598. [    0.937411] md: raid5 personality registered for level 5
  599. [    0.937419] md: raid4 personality registered for level 4
  600. [    0.937923] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  601. [    0.937942] device-mapper: raid: Loading target version 1.7.0
  602. [    0.937960] Bluetooth: Virtual HCI driver ver 1.5
  603. [    0.938153] Bluetooth: HCI UART driver ver 2.3
  604. [    0.938164] Bluetooth: HCI UART protocol H4 registered
  605. [    0.938172] Bluetooth: HCI UART protocol ATH3K registered
  606. [    0.938279] usbcore: registered new interface driver bfusb
  607. [    0.938362] usbcore: registered new interface driver btusb
  608. [    0.938377] rtk_btusb: RTKBT_RELEASE_NAME: 20180702_BT_ANDROID_8.1
  609. [    0.938384] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.5
  610. [    0.938391] rtk_btusb: Register usb char device interface for BT driver
  611. [    0.938680] usbcore: registered new interface driver rtk_btusb
  612. [    0.939561] cpu cpu0: leakage=18
  613. [    0.939605] cpu cpu0: Looking up cpu-supply from device tree
  614. [    0.941382] cpu cpu4: leakage=32
  615. [    0.941421] cpu cpu4: Looking up cpu-supply from device tree
  616. [    0.942684] cpu cpu0: Looking up cpu-supply from device tree
  617. [    0.943174] cpu cpu0: Looking up cpu-supply from device tree
  618. [    0.946767] cpu cpu0: failed to find power_model node
  619. [    0.947106] cpu cpu4: Looking up cpu-supply from device tree
  620. [    0.950153] cpu cpu4: failed to find power_model node
  621. [    0.953042] sdhci: Secure Digital Host Controller Interface driver
  622. [    0.953056] sdhci: Copyright(c) Pierre Ossman
  623. [    0.953072] Synopsys Designware Multimedia Card Interface Driver
  624. [    0.954647] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
  625. [    0.954751] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
  626. [    0.954778] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
  627. [    0.954864] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo
  628. [    0.954926] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree
  629. [    0.955090] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree
  630. [    0.955259] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp
  631. [    0.955274] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup
  632. [    0.955294] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000[0]'
  633. [    0.955312] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000[0]'
  634. [    0.955327] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup
  635. [    0.955342] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed
  636. [    0.956949] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
  637. [    0.956990] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  638. [    0.957012] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  639. [    0.957093] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
  640. [    0.957129] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply from device tree
  641. [    0.957269] dwmmc_rockchip fe320000.dwmmc: Looking up vqmmc-supply from device tree
  642. [    0.957393] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer cd
  643. [    0.957409] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
  644. [    0.957427] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@fe320000[0]'
  645. [    0.957445] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@fe320000[0]'
  646. [    0.957460] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
  647. [    0.957474] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO cd failed
  648. [    0.957491] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer wp
  649. [    0.957504] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
  650. [    0.957520] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe320000[0]'
  651. [    0.957536] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe320000[0]'
  652. [    0.957549] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
  653. [    0.957563] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO wp failed
  654. [    0.968976] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  655. [    0.980052] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
  656. [    0.980788] sdhci-pltfm: SDHCI platform and OF driver helper
  657. [    0.981769] sdhci-arasan fe330000.sdhci: GPIO lookup for consumer wp
  658. [    0.981789] sdhci-arasan fe330000.sdhci: using device tree for GPIO lookup
  659. [    0.981810] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/sdhci@fe330000[0]'
  660. [    0.981829] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/sdhci@fe330000[0]'
  661. [    0.981845] sdhci-arasan fe330000.sdhci: using lookup tables for GPIO lookup
  662. [    0.981861] sdhci-arasan fe330000.sdhci: lookup for GPIO wp failed
  663. [    0.983029] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply from device tree
  664. [    0.983051] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply property in node /sdhci@fe330000 failed
  665. [    0.983108] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply from device tree
  666. [    0.983127] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply property in node /sdhci@fe330000 failed
  667. [    0.983166] sdhci-arasan fe330000.sdhci: No vmmc regulator found
  668. [    0.983179] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
  669. [    1.009891] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
  670. [    1.011904] of_get_named_gpiod_flags: parsed 'gpios' property of node '/switches/hpout-en[0]' - status (0)
  671. [    1.012345] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/green-led[0]' - status (0)
  672. [    1.012650] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/red-led[0]' - status (0)
  673. [    1.013486] ledtrig-cpu: registered to indicate activity on CPUs
  674. [    1.013698] hidraw: raw HID events driver (C) Jiri Kosina
  675. [    1.021980] usbcore: registered new interface driver usbhid
  676. [    1.021996] usbhid: USB HID core driver
  677. [    1.025977] usbcore: registered new interface driver snd-usb-audio
  678. [    1.027510] of_get_named_gpiod_flags: parsed 'spk-con-gpio' property of node '/i2c@ff110000/es8316@11[0]' - status (0)
  679. [    1.027603] of_get_named_gpiod_flags: parsed 'hp-det-gpio' property of node '/i2c@ff110000/es8316@11[0]' - status (0)
  680. [    1.038404] u32 classifier
  681. [    1.038441] Netfilter messages via NETLINK v0.30.
  682. [    1.038560] ip_set: protocol 6
  683. [    1.038976] ip_tables: (C) 2000-2006 Netfilter Core Team
  684. [    1.039080] Initializing XFRM netlink socket
  685. [    1.040177] NET: Registered protocol family 10
  686. [    1.042505] NET: Registered protocol family 17
  687. [    1.042562] NET: Registered protocol family 15
  688. [    1.042630] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  689. [    1.042748] Bridge firewalling registered
  690. [    1.043485] Bluetooth: RFCOMM socket layer initialized
  691. [    1.043561] Bluetooth: RFCOMM ver 1.11
  692. [    1.043611] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  693. [    1.043640] Bluetooth: HIDP socket layer initialized
  694. [    1.043824] 8021q: 802.1Q VLAN Support v1.8
  695. [    1.043881] lib80211: common routines for IEEE802.11 drivers
  696. [    1.043894] lib80211_crypt: registered algorithm 'NULL'
  697. [    1.043920] [WLAN_RFKILL]: Enter rfkill_wlan_init
  698. [    1.044469] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  699. [    1.044539] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6256
  700. [    1.044552] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  701. [    1.044564] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  702. [    1.044582] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]'
  703. [    1.044598] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]'
  704. [    1.044613] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]'
  705. [    1.044701] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0)
  706. [    1.044715] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
  707. [    1.044734] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
  708. [    1.044745] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  709. [    1.044760] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  710. [    1.044863] [BT_RFKILL]: Enter rfkill_rk_init
  711. [    1.045513] [BT_RFKILL]: Enter rfkill_rk_probe
  712. [    1.045570] of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth[0]' - status (0)
  713. [    1.045582] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
  714. [    1.045603] of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth[0]'
  715. [    1.045648] of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth[0]' - status (0)
  716. [    1.045687] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
  717. [    1.045733] of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth[0]' - status (0)
  718. [    1.045745] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 91.
  719. [    1.045788] of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth[0]' - status (0)
  720. [    1.045800] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
  721. [    1.045832] [RK808]: clkout2_prepare
  722. [    1.046768] [BT_RFKILL]: init gpio
  723. [    1.046843] [BT_RFKILL]: Request irq for bt wakeup host
  724. [    1.046929] [BT_RFKILL]: ** disable irq
  725. [    1.046945] [BT_RFKILL]: setup rfkill
  726. [    1.047165] [BT_RFKILL]: bt_default device registered.
  727. [    1.047304] Key type dns_resolver registered
  728. [    1.047491] sensor_register_slave:mpu6880_gyro,id=50
  729. [    1.050204] Registered cp15_barrier emulation handler
  730. [    1.050620] Registered setend emulation handler
  731. [    1.054060] Loading compiled-in X.509 certificates
  732. [    1.054239] zswap: loaded using pool lzo/zbud
  733. [    1.055379] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up phy-supply from device tree
  734. [    1.055407] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
  735. [    1.055787] mmc1: MAN_BKOPS_EN bit is not set
  736. [    1.056271] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up vbus-supply from device tree
  737. [    1.056298] phy phy-ff770000.syscon:usb2-phy@e450.5: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
  738. [    1.056345] phy phy-ff770000.syscon:usb2-phy@e450.5: Failed to get VBUS supply regulator
  739. [    1.057010] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up phy-supply from device tree
  740. [    1.057152] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e450.6 err -2
  741. [    1.058754] phy phy-ff7c0000.phy.7: Looking up phy-supply from device tree
  742. [    1.058776] phy phy-ff7c0000.phy.7: Looking up phy-supply property in node /phy@ff7c0000/dp-port failed
  743. [    1.058997] phy phy-ff7c0000.phy.8: Looking up phy-supply from device tree
  744. [    1.059015] phy phy-ff7c0000.phy.8: Looking up phy-supply property in node /phy@ff7c0000/usb3-port failed
  745. [    1.059407] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree
  746. [    1.059745] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree
  747. [    1.059850] rockchip-iodomain ff770000.syscon:io-domains: Looking up audio-supply from device tree
  748. [    1.059964] rockchip-iodomain ff770000.syscon:io-domains: Looking up sdmmc-supply from device tree
  749. [    1.060082] rockchip-iodomain ff770000.syscon:io-domains: Looking up gpio1830-supply from device tree
  750. [    1.060344] universal-charger usb-charger: GPIO lookup for consumer dc-det
  751. [    1.060359] universal-charger usb-charger: using device tree for GPIO lookup
  752. [    1.060378] of_get_named_gpiod_flags: can't parse 'dc-det-gpios' property of node '/usb-charger[0]'
  753. [    1.060394] of_get_named_gpiod_flags: can't parse 'dc-det-gpio' property of node '/usb-charger[0]'
  754. [    1.060409] universal-charger usb-charger: using lookup tables for GPIO lookup
  755. [    1.060424] universal-charger usb-charger: lookup for GPIO dc-det failed
  756. [    1.060438] universal-charger usb-charger: invalid dc det gpio!
  757. [    1.063129] pwm-backlight edp-backlight: GPIO lookup for consumer enable
  758. [    1.063152] pwm-backlight edp-backlight: using device tree for GPIO lookup
  759. [    1.063175] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/edp-backlight[0]'
  760. [    1.063193] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/edp-backlight[0]'
  761. [    1.063210] pwm-backlight edp-backlight: using lookup tables for GPIO lookup
  762. [    1.063226] pwm-backlight edp-backlight: lookup for GPIO enable failed
  763. [    1.063245] pwm-backlight edp-backlight: Looking up power-supply from device tree
  764. [    1.064572] rockchip-drm display-subsystem: defer getting devfreq
  765. [    1.065703] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff800909af58)
  766. [    1.066168] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff800909af58)
  767. [    1.066315] rockchip-drm display-subsystem: failed to bind ff970000.edp (ops 0xffffff8009093270): -517
  768. [    1.066834] rockchip-drm display-subsystem: master bind failed: -517
  769. [    1.067639] panel-simple edp-panel: Looking up power-supply from device tree
  770. [    1.067937] panel-simple edp-panel: GPIO lookup for consumer enable
  771. [    1.067954] panel-simple edp-panel: using device tree for GPIO lookup
  772. [    1.068012] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/edp-panel[0]' - status (0)
  773. [    1.068040] no flags found for enable
  774. [    1.068058] panel-simple edp-panel: GPIO lookup for consumer reset
  775. [    1.068072] panel-simple edp-panel: using device tree for GPIO lookup
  776. [    1.068090] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/edp-panel[0]'
  777. [    1.068106] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/edp-panel[0]'
  778. [    1.068122] panel-simple edp-panel: using lookup tables for GPIO lookup
  779. [    1.068137] panel-simple edp-panel: lookup for GPIO reset failed
  780. [    1.069157] mmc1: new HS200 MMC card at address 0001
  781. [    1.070485] mmcblk1: mmc1:0001 DA4128 116 GiB
  782. [    1.071077] mmcblk1boot0: mmc1:0001 DA4128 partition 1 4.00 MiB
  783. [    1.071611] mmcblk1boot1: mmc1:0001 DA4128 partition 2 4.00 MiB
  784. [    1.072531] mmcblk1rpmb: mmc1:0001 DA4128 partition 3 16.0 MiB
  785. [    1.073958]  mmcblk1: p1 p2
  786. [    1.074420] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  787. [    1.074815] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
  788. [    1.075049] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00010010
  789. [    1.075141] xhci-hcd xhci-hcd.2.auto: irq 225, io mem 0xfe800000
  790. [    1.075492] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  791. [    1.075512] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  792. [    1.075528] usb usb3: Product: xHCI Host Controller
  793. [    1.075543] usb usb3: Manufacturer: Linux 4.4.196 xhci-hcd
  794. [    1.075557] usb usb3: SerialNumber: xhci-hcd.2.auto
  795. [    1.076865] hub 3-0:1.0: USB hub found
  796. [    1.076935] hub 3-0:1.0: 1 port detected
  797. [    1.077730] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
  798. [    1.078212] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4
  799. [    1.078342] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  800. [    1.078547] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  801. [    1.078566] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  802. [    1.078582] usb usb4: Product: xHCI Host Controller
  803. [    1.078597] usb usb4: Manufacturer: Linux 4.4.196 xhci-hcd
  804. [    1.078611] usb usb4: SerialNumber: xhci-hcd.2.auto
  805. [    1.079645] hub 4-0:1.0: USB hub found
  806. [    1.079759] hub 4-0:1.0: 1 port detected
  807. [    1.082146] xhci-hcd xhci-hcd.2.auto: remove, state 1
  808. [    1.082185] usb usb4: USB disconnect, device number 1
  809. [    1.083120] xhci-hcd xhci-hcd.2.auto: USB bus 4 deregistered
  810. [    1.083391] xhci-hcd xhci-hcd.2.auto: remove, state 1
  811. [    1.083428] usb usb3: USB disconnect, device number 1
  812. [    1.087833] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  813. [    1.088122] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4
  814. [    1.088353] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00010010
  815. [    1.088447] xhci-hcd xhci-hcd.3.auto: irq 226, io mem 0xfe900000
  816. [    1.088752] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
  817. [    1.088772] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  818. [    1.088788] usb usb4: Product: xHCI Host Controller
  819. [    1.088803] usb usb4: Manufacturer: Linux 4.4.196 xhci-hcd
  820. [    1.088817] usb usb4: SerialNumber: xhci-hcd.3.auto
  821. [    1.089638] hub 4-0:1.0: USB hub found
  822. [    1.089726] hub 4-0:1.0: 1 port detected
  823. [    1.090260] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  824. [    1.090520] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 5
  825. [    1.090641] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
  826. [    1.090860] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
  827. [    1.090879] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  828. [    1.090893] usb usb5: Product: xHCI Host Controller
  829. [    1.090908] usb usb5: Manufacturer: Linux 4.4.196 xhci-hcd
  830. [    1.090922] usb usb5: SerialNumber: xhci-hcd.3.auto
  831. [    1.091775] hub 5-0:1.0: USB hub found
  832. [    1.091835] hub 5-0:1.0: 1 port detected
  833. [    1.095728] ehci-platform fe380000.usb: EHCI Host Controller
  834. [    1.096079] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 6
  835. [    1.096293] ehci-platform fe380000.usb: irq 27, io mem 0xfe380000
  836. [    1.100302] xhci-hcd xhci-hcd.2.auto: Host not halted after 16000 microseconds.
  837. [    1.100319] xhci-hcd xhci-hcd.2.auto: Host controller not halted, aborting reset.
  838. [    1.100473] xhci-hcd xhci-hcd.2.auto: USB bus 3 deregistered
  839. [    1.135012] usb 1-1: new high-speed USB device number 2 using ehci-platform
  840. [    1.140990] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  841. [    1.141390] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
  842. [    1.141413] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  843. [    1.141431] usb usb6: Product: EHCI Host Controller
  844. [    1.141448] usb usb6: Manufacturer: Linux 4.4.196 ehci_hcd
  845. [    1.141462] usb usb6: SerialNumber: fe380000.usb
  846. [    1.142781] hub 6-0:1.0: USB hub found
  847. [    1.142846] hub 6-0:1.0: 1 port detected
  848. [    1.144332] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  849. [    1.144951] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
  850. [    1.145148] ohci-platform fe3a0000.usb: irq 28, io mem 0xfe3a0000
  851. [    1.200491] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  852. [    1.200523] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  853. [    1.200545] usb usb3: Product: Generic Platform OHCI controller
  854. [    1.200565] usb usb3: Manufacturer: Linux 4.4.196 ohci_hcd
  855. [    1.200584] usb usb3: SerialNumber: fe3a0000.usb
  856. [    1.202581] hub 3-0:1.0: USB hub found
  857. [    1.202693] hub 3-0:1.0: 1 port detected
  858. [    1.204587] pwrseq_simple sdio-pwrseq: GPIO lookup for consumer reset
  859. [    1.204610] pwrseq_simple sdio-pwrseq: using device tree for GPIO lookup
  860. [    1.204713] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0)
  861. [    1.207013] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
  862. [    1.207082] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
  863. [    1.207112] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
  864. [    1.207182] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo
  865. [    1.207238] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree
  866. [    1.207502] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree
  867. [    1.207753] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp
  868. [    1.207775] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup
  869. [    1.207800] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000[0]'
  870. [    1.207824] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000[0]'
  871. [    1.207845] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup
  872. [    1.207866] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed
  873. [    1.208036] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
  874. [    1.219115] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  875. [    1.230198] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
  876. [    1.231618] rockchip-dmc dmc: Looking up center-supply from device tree
  877. [    1.232286] rockchip-dmc dmc: Failed to get leakage
  878. [    1.232383] rockchip-dmc dmc: Looking up center-supply from device tree
  879. [    1.232448] vdd_center: could not add device link dmc err -17
  880. [    1.232476] vdd_center: Failed to create debugfs directory
  881. [    1.234238] rockchip-dmc dmc: could not find power_model node
  882. [    1.235258] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/speaker-sound[0]'
  883. [    1.235283] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/speaker-sound[0]'
  884. [    1.275633] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  885. [    1.277224] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  886. [    1.278811] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  887. [    1.283049] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  888. [    1.286911] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
  889. [    1.341143] mmc_host mmc2: Bus speed (slot 0) = 84500000Hz (slot req 90000000Hz, actual 84500000HZ div = 0)
  890. [    1.359415] asoc-simple-card speaker-sound: ES8316 HiFi <-> ff890000.i2s mapping ok
  891. [    1.359722] es8316 1-0011: ASoC: Failed to create Left Hp mixer debugfs file
  892. [    1.359738] es8316 1-0011: ASoC: Failed to create Right Hp mixer debugfs file
  893. [    1.359764] es8316 1-0011: ASoC: Failed to create HPCP L debugfs file
  894. [    1.359778] es8316 1-0011: ASoC: Failed to create HPCP R debugfs file
  895. [    1.359803] es8316 1-0011: ASoC: Failed to create HPVOL L debugfs file
  896. [    1.359817] es8316 1-0011: ASoC: Failed to create HPVOL R debugfs file
  897. [    1.363976] rockchip-drm display-subsystem: devfreq is ready
  898. [    1.365051] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff800909af58)
  899. [    1.365467] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff800909af58)
  900. [    1.365734] rockchip-dp ff970000.edp: Looking up vcc-supply from device tree
  901. [    1.365757] rockchip-dp ff970000.edp: Looking up vcc-supply property in node /edp@ff970000 failed
  902. [    1.365818] rockchip-dp ff970000.edp: Looking up vccio-supply from device tree
  903. [    1.365836] rockchip-dp ff970000.edp: Looking up vccio-supply property in node /edp@ff970000 failed
  904. [    1.366009] rockchip-dp ff970000.edp: no DP phy configured
  905. [    1.366073] rockchip-dp ff970000.edp: GPIO lookup for consumer hpd
  906. [    1.366088] rockchip-dp ff970000.edp: using device tree for GPIO lookup
  907. [    1.366108] of_get_named_gpiod_flags: can't parse 'hpd-gpios' property of node '/edp@ff970000[0]'
  908. [    1.366126] of_get_named_gpiod_flags: can't parse 'hpd-gpio' property of node '/edp@ff970000[0]'
  909. [    1.366141] rockchip-dp ff970000.edp: using lookup tables for GPIO lookup
  910. [    1.366157] rockchip-dp ff970000.edp: lookup for GPIO hpd failed
  911. [    1.366504] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
  912. [    1.366518] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  913. [    1.366529] usb 1-1: Product: USB2.0 Hub
  914. [    1.367850] hub 1-1:1.0: USB hub found
  915. [    1.368196] rockchip-drm display-subsystem: bound ff970000.edp (ops 0xffffff8009093270)
  916. [    1.368248] hub 1-1:1.0: 4 ports detected
  917. [    1.370053] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
  918. [    1.370126] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8009091cc0)
  919. [    1.370143] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  920. [    1.370154] [drm] No driver support for vblank timestamp query.
  921. [    1.370490] rockchip-drm display-subsystem: failed to parse loader memory
  922. [    1.392275] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 1920x1080p60, type: 14
  923. [    1.416081] rockchip-dp ff970000.edp: [drm:analogix_dp_link_start] Enable downspread on the sink
  924. [    1.417795] rockchip-dp ff970000.edp: Link Training Clock Recovery success
  925. [    1.419376] rockchip-dp ff970000.edp: Link Training success!
  926. [    1.556424] vendor storage:20160801 ret = 0
  927. [    1.665647] Console: switching to colour frame buffer device 240x67
  928. [    1.734032] usb 3-1: new low-speed USB device number 2 using ohci-platform
  929. [    1.737887] usb 1-1.2: new high-speed USB device number 3 using ehci-platform
  930. [    1.742345] rockchip-drm display-subsystem: fb0:  frame buffer device
  931. [    1.749926] rk-hdmi-dp-sound hdmi-dp-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
  932. [    1.749969] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: Failed to create Playback debugfs file
  933. [    1.752376] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.10 (r)
  934. [    1.752393] ======== dhd_wlan_init_plat_data ========
  935. [    1.752402] dhd_wlan_init_gpio: WL_REG_ON=-1
  936. [    1.752411] dhd_wifi_platform_load: Enter
  937. [    1.752444] Power-up adapter 'DHD generic adapter'
  938. [    1.752506] wifi_platform_set_power = 1
  939. [    1.752514] ======== PULL WL_REG_ON(-1) HIGH! ========
  940. [    1.752523] [WLAN_RFKILL]: rockchip_wifi_power: 1
  941. [    1.752531] [WLAN_RFKILL]: wifi turn on power. -1
  942. [    1.752985] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/power[0]' - status (0)
  943. [    1.753019] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/lid[0]' - status (0)
  944. [    1.753057] gpio-5 (Power): gpiod_set_debounce: missing set() or set_debounce() operations
  945. [    1.753123] gpio-33 (Lid): gpiod_set_debounce: missing set() or set_debounce() operations
  946. [    1.753311] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  947. [    1.756575] rk808-rtc rk808-rtc: setting system clock to 2019-10-21 21:22:34 UTC (1571692954)
  948. [    1.756726] of_cfs_init
  949. [    1.756768] of_cfs_init: OK
  950. [    1.780811] ALSA device list:
  951. [    1.780823]   #0: es8316-spk-sound
  952. [    1.780831]   #1: rk-hdmi-dp-sound
  953. [    1.781264] md: Waiting for all devices to be available before autodetect
  954. [    1.781273] md: If you don't use raid, use raid=noautodetect
  955. [    1.782292] md: Autodetecting RAID arrays.
  956. [    1.782302] md: Scanned 0 and added 0 devices.
  957. [    1.782308] md: autorun ...
  958. [    1.782315] md: ... autorun DONE.
  959. [    1.806684] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
  960. [    1.806726] VFS: Mounted root (ext4 filesystem) on device 179:2.
  961. [    1.808054] devtmpfs: mounted
  962. [    1.808878] Freeing unused kernel memory: 1216K
  963. [    1.939990] systemd[1]: Failed to insert module 'autofs4': No such file or directory
  964. [    1.949040] random: systemd: uninitialized urandom read (16 bytes read, 38 bits of entropy available)
  965. [    1.950938] random: systemd: uninitialized urandom read (16 bytes read, 38 bits of entropy available)
  966. [    1.952625] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  967. [    1.953334] systemd[1]: Detected architecture arm64.
  968. [    1.953978] systemd[1]: Set hostname to <Pinebook-Pro>.
  969. [    1.964143] usb 1-1.2: New USB device found, idVendor=0c45, idProduct=6321
  970. [    1.964158] usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
  971. [    1.964168] usb 1-1.2: Product: USB Camera
  972. [    1.964177] usb 1-1.2: Manufacturer: Sonix Technology Co., Ltd.
  973. [    1.967130] uvcvideo: Found UVC 1.00 device USB Camera (0c45:6321)
  974. [    1.980703] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 41 bits of entropy available)
  975. [    1.980957] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 41 bits of entropy available)
  976. [    1.988377] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 42 bits of entropy available)
  977. [    1.989195] random: systemd-cryptse: uninitialized urandom read (16 bytes read, 42 bits of entropy available)
  978. [    2.020981] random: systemd: uninitialized urandom read (16 bytes read, 45 bits of entropy available)
  979. [    2.021640] random: systemd: uninitialized urandom read (16 bytes read, 45 bits of entropy available)
  980. [    2.021979] random: systemd: uninitialized urandom read (16 bytes read, 46 bits of entropy available)
  981. [    2.022538] random: systemd: uninitialized urandom read (16 bytes read, 46 bits of entropy available)
  982. [    2.032090] usb 3-1: New USB device found, idVendor=258a, idProduct=001e
  983. [    2.032108] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  984. [    2.032116] usb 3-1: Product: USB KEYBOARD
  985. [    2.032125] usb 3-1: Manufacturer: HAILUCK CO.,LTD
  986. [    2.041756] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:258A:001E.0001/input/input1
  987. [    2.052810] wifi_platform_bus_enumerate device present 1
  988. [    2.052821] ======== Card detection to detect SDIO card! ========
  989. [    2.052829] mmc2:mmc host rescan start!
  990. [    2.093799] hid-generic 0003:258A:001E.0001: input,hidraw0: USB HID v1.10 Keyboard [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input0
  991. [    2.132502] input: HAILUCK CO.,LTD USB KEYBOARD Touchpad as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.1/0003:258A:001E.0002/input/input2
  992. [    2.184527] hid-multitouch 0003:258A:001E.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-fe3a0000.usb-1/input1
  993. [    2.190553] systemd[1]: Configuration file /lib/systemd/system/partition-bootup.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  994. [    2.194216] systemd[1]: Configuration file /etc/systemd/system/rockpro-hciattach.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  995. [    2.211164] systemd[1]: Listening on udev Control Socket.
  996. [    2.211689] systemd[1]: Listening on Journal Socket.
  997. [    2.211797] systemd[1]: Reached target Libvirt guests shutdown.
  998. [    2.212015] systemd[1]: Listening on Journal Socket (/dev/log).
  999. [    2.212190] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  1000. [    2.212342] systemd[1]: Listening on Syslog Socket.
  1001. [    2.212500] systemd[1]: Listening on udev Kernel Socket.
  1002. [    2.213150] systemd[1]: Created slice System Slice.
  1003. [    2.215172] systemd[1]: Starting Remount Root and Kernel File Systems...
  1004. [    2.217635] systemd[1]: Mounting Debug File System...
  1005. [    2.218880] systemd[1]: Created slice system-serial\x2dgetty.slice.
  1006. [    2.225103] systemd[1]: Starting Load Kernel Modules...
  1007. [    2.229446] systemd[1]: Starting Restore / save the current clock...
  1008. [    2.232962] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  1009. [    2.236737] systemd[1]: Mounting POSIX Message Queue File System...
  1010. [    2.236940] systemd[1]: Reached target User and Group Name Lookups.
  1011. [    2.237206] systemd[1]: Starting of Arbitrary Executable File Formats File System Automount Point not supported.
  1012. [    2.244090] systemd[1]: Created slice system-getty.slice.
  1013. [    2.246348] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  1014. [    2.248320] systemd[1]: Created slice User and Session Slice.
  1015. [    2.251116] systemd[1]: Reached target Slices.
  1016. [    2.261474] systemd[1]: Starting Journal Service...
  1017. [    2.265005] systemd[1]: Reached target Remote File Systems.
  1018. [    2.267226] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  1019. [    2.270088] systemd[1]: Reached target Paths.
  1020. [    2.272003] systemd[1]: Reached target Encrypted Volumes.
  1021. [    2.277793] systemd[1]: Mounted Debug File System.
  1022. [    2.279979] systemd[1]: Mounted POSIX Message Queue File System.
  1023. [    2.282597] systemd[1]: Started Remount Root and Kernel File Systems.
  1024. [    2.292866] systemd[1]: Started Load Kernel Modules.
  1025. [    2.294727] systemd[1]: Started Restore / save the current clock.
  1026. [    2.297627] systemd[1]: Started Create list of required static device nodes for the current kernel.
  1027. [    2.305488] systemd[1]: Starting Create Static Device Nodes in /dev...
  1028. [    2.310209] systemd[1]: Mounting FUSE Control File System...
  1029. [    2.315210] systemd[1]: Mounting Configuration File System...
  1030. [    2.323769] systemd[1]: Starting Apply Kernel Variables...
  1031. [    2.329794] systemd[1]: Starting Rebuild Hardware Database...
  1032. [    2.334329] systemd[1]: Starting Load/Save Random Seed...
  1033. [    2.339420] systemd[1]: Activating swap /swapfile...
  1034. [    2.346709] systemd[1]: Mounted FUSE Control File System.
  1035. [    2.350062] systemd[1]: Mounted Configuration File System.
  1036. [    2.353634] systemd[1]: Started Apply Kernel Variables.
  1037. [    2.357694] systemd[1]: Started Create Static Device Nodes in /dev.
  1038. [    2.360321] systemd[1]: Reached target Local File Systems (Pre).
  1039. [    2.362860] systemd[1]: Reached target Local File Systems.
  1040. [    2.366945] systemd[1]: Starting Enable support for additional executable binary formats...
  1041. [    2.372528] systemd[1]: Starting udev Kernel Device Manager...
  1042. [    2.382988] systemd[1]: Starting Raise network interfaces...
  1043. [    2.389653] systemd[1]: Started Load/Save Random Seed.
  1044. [    2.391830] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 94
  1045. [    2.393352] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
  1046. [    2.393384] mmc2: new ultra high speed SDR104 SDIO card at address 0001
  1047. [    2.395326] systemd[1]: Started Enable support for additional executable binary formats.
  1048. [    2.410787] bcmsdh_register: register client driver
  1049. [    2.410939] bcmsdh_sdmmc_probe: Enter num=1
  1050. [    2.411062] bcmsdh_sdmmc_probe: Enter num=2
  1051. [    2.411067] bus num (host idx)=2, slot num (rca)=1
  1052. [    2.411073] found adapter info 'DHD generic adapter'
  1053. [    2.411101] sdioh_attach: set sd_f2_blocksize 256
  1054. [    2.411121] sdioh_attach: sd clock rate = 0
  1055. [    2.411249] dhdsdio_probe : no mutex held. set lock
  1056. [    2.411316] F1 signature read @0x18000000=0x15294345
  1057. [    2.413605] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x9 pkg:0x2
  1058. [    2.414056] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000
  1059. [    2.414129] dhd_conf_set_chiprev: chip=0x4345, chiprev=9
  1060. [    2.414358] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211
  1061. [    2.415256] CFG80211-ERROR) wl_init_prof : wl_init_prof: No profile
  1062. [    2.415483] wl_escan_attach: Enter
  1063. [    2.415518] wl_escan_init: Enter
  1064. [    2.415841] Adding 511996k swap on /swapfile.  Priority:-1 extents:4 across:524284k SSFS
  1065. [    2.416061] systemd[1]: Activated swap /swapfile.
  1066. [    2.416133] wl_create_event_handler(): thread:wl_escan_handler:f1 started
  1067. [    2.416137] tsk Enter, tsk = 0xffffffc0eed701b0
  1068. [    2.416927] dhd_attach(): thread:dhd_watchdog_thread:f3 started
  1069. [    2.423763] systemd[1]: Reached target Swap.
  1070. [    2.424469] dhd_attach(): thread:dhd_dpc:f5 started
  1071. [    2.424580] dhd_attach(): thread:dhd_rxf:f8 started
  1072. [    2.424594] dhd_deferred_work_init: work queue initialized
  1073. [    2.424600] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2
  1074. [    2.424641] dhd_bus_set_default_min_res_mask: Unhandled chip id
  1075. [    2.433049] sdioh_cis_read: func_cis_ptr[0]=0x10ac
  1076. [    2.446783] Dongle Host Driver, version 1.579.77.41.10 (r)
  1077. [    2.447559] wl_ext_iapsta_attach_netdev: ifidx=0, bssidx=0
  1078. [    2.447577] Register interface [wlan0]  MAC: 6c:21:a2:41:d9:2e
  1079.  
  1080. [    2.447644] dhd_tcpack_suppress_set: TCP ACK Suppress mode 2 -> mode 0
  1081. [    2.447687] dhd_wl_ioctl: returning as busstate=0
  1082. [    2.447694] dhd_dbg_detach_pkt_monitor, 2204
  1083. [    2.447701] dhd_bus_devreset: == Power OFF ==
  1084. [    2.447875] dhd_txglom_enable: enable 0
  1085. [    2.447883] dhd_conf_set_txglom_params: txglom_mode=copy
  1086. [    2.447889] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0
  1087. [    2.447894] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1
  1088. [    2.447900] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=-1
  1089. [    2.447905] dhd_bus_devreset:  WLAN OFF DONE
  1090. [    2.448087] wifi_platform_set_power = 0
  1091. [    2.448098] ======== PULL WL_REG_ON(-1) LOW! ========
  1092. [    2.448107] [WLAN_RFKILL]: rockchip_wifi_power: 0
  1093. [    2.448123] [WLAN_RFKILL]: wifi shut off power.
  1094. [    2.448130] dhdsdio_probe : the lock is released.
  1095. [    2.449010] bcmsdh_sdmmc: probe of mmc2:0001:3 failed with error -110
  1096. [    2.449084] dhd_module_init: Exit err=0
  1097. [    2.465290] systemd[1]: Started udev Kernel Device Manager.
  1098. [    2.557526] systemd[1]: Started Journal Service.
  1099. [    2.594232] systemd-journald[206]: Received request to flush runtime journal from PID 1
  1100. [    3.524547] [BT_RFKILL]: Enter rfkill_rk_set_power
  1101. [    3.524555] [BT_RFKILL]: Set blocked:1
  1102. [    3.524558] [BT_RFKILL]: bt shut off power
  1103. [    3.552496] rockchip-saradc ff100000.saradc: Looking up vref-supply from device tree
  1104. [    3.552516] rockchip-saradc ff100000.saradc: Looking up vref-supply property in node /saradc@ff100000 failed
  1105. [    3.552558] ff100000.saradc supply vref not found, using dummy regulator
  1106. [    3.633884] phy phy-pcie-phy.9: Looking up phy-supply from device tree
  1107. [    3.633895] phy phy-pcie-phy.9: Looking up phy-supply property in node /pcie-phy failed
  1108. [    3.635972] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep
  1109. [    3.635989] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup
  1110. [    3.636061] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0)
  1111. [    3.636394] rockchip-pcie f8000000.pcie: Looking up vpcie12v-supply from device tree
  1112. [    3.636411] rockchip-pcie f8000000.pcie: Looking up vpcie12v-supply property in node /pcie@f8000000 failed
  1113. [    3.636453] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
  1114. [    3.636460] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree
  1115. [    3.636467] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply property in node /pcie@f8000000 failed
  1116. [    3.636481] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
  1117. [    3.636488] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply from device tree
  1118. [    3.636496] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply property in node /pcie@f8000000 failed
  1119. [    3.636509] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  1120. [    3.636515] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply from device tree
  1121. [    3.636523] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply property in node /pcie@f8000000 failed
  1122. [    3.636535] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  1123. [    3.636544] rockchip-pcie f8000000.pcie: missing optional "memory-region" property
  1124. [    3.636551] rockchip-pcie f8000000.pcie: missing optional "rockchip,dma_trx_enabled" property
  1125. [    3.636558] rockchip-pcie f8000000.pcie: missing optional "rockchip,deferred" property
  1126. [    3.636578] rockchip-pcie f8000000.pcie: calling really probe
  1127. [    3.636584] rockchip-pcie f8000000.pcie: PCIe asserting reset
  1128. [    3.636619] rockchip-pcie f8000000.pcie: advertising gen2/1 training
  1129. [    3.636749] rockchip-pcie f8000000.pcie: PCIe reset released
  1130. [    3.639631] mali ff9a0000.gpu: Looking up mali-supply from device tree
  1131. [    3.641837] mali ff9a0000.gpu: leakage=24
  1132. [    3.641858] mali ff9a0000.gpu: Looking up mali-supply from device tree
  1133. [    3.641879] vdd_gpu: could not add device link ff9a0000.gpu err -17
  1134. [    3.641885] vdd_gpu: Failed to create debugfs directory
  1135. [    3.650253] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
  1136. [    3.650403] mali ff9a0000.gpu: Protected mode not available
  1137. [    3.655897] mali ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
  1138. [    3.655944] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
  1139. [    3.656074] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 431; [Func] : kbase_devfreq_init(); success initing power_model_simple.
  1140. [    3.659155] mali ff9a0000.gpu: Probed as mali0
  1141. [    3.839989] dhd_ioctl_entry: Interface is down
  1142. [    3.839998] Error getting the SSID
  1143. [    3.871095] random: nonblocking pool is initialized
  1144. [    3.898423] dhd_open: Enter ffffffc0f037c000
  1145. [    3.898430] dhd_open : no mutex held. set lock
  1146. [    3.898438]
  1147.                Dongle Host Driver, version 1.579.77.41.10 (r)
  1148. [    3.898443] wl_ext_iapsta_attach_netdev: ifidx=0, bssidx=0
  1149. [    3.898447] wl_android_wifi_on in 1
  1150. [    3.898451] wl_android_wifi_on in 2: g_wifi_on=0
  1151. [    3.898455] wifi_platform_set_power = 1
  1152. [    3.898459] ======== PULL WL_REG_ON(-1) HIGH! ========
  1153. [    3.898463] [WLAN_RFKILL]: rockchip_wifi_power: 1
  1154. [    3.898468] [WLAN_RFKILL]: wifi turn on power. -1
  1155. [    3.966636] [BT_RFKILL]: Enter rfkill_rk_set_power
  1156. [    3.966650] [BT_RFKILL]: Set blocked:0
  1157. [    3.966703] [BT_RFKILL]: Enter rfkill_rk_sleep_bt
  1158. [    3.966711] [BT_RFKILL]: *** bt sleep: 0 ***
  1159. [    3.989342] FAT-fs (mmcblk1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  1160. [    3.989570] [BT_RFKILL]: ENABLE UART_RTS
  1161. [    4.089708] [BT_RFKILL]: DISABLE UART_RTS
  1162. [    4.089775] [BT_RFKILL]: bt turn on power
  1163. [    4.136895] rockchip-pcie f8000000.pcie: PCIe link training gen1 timed out.
  1164. [    4.136921] rockchip-pcie f8000000.pcie: init port failed
  1165. [    4.136960] rockchip-pcie f8000000.pcie: probe init failed
  1166. [    4.136990] rockchip-pcie f8000000.pcie: PCIe probe failed.
  1167. [    4.137119] rockchip-pcie: probe of f8000000.pcie failed with error -110
  1168. [    4.198704] sdio_reset_comm():
  1169. [    4.225724] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  1170. [    4.243694] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
  1171. [    4.298630] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
  1172. [    4.304616] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  1173. [    4.310591] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
  1174. [    4.321561] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
  1175. [    4.536655] mmc_host mmc2: Bus speed (slot 0) = 84500000Hz (slot req 90000000Hz, actual 84500000HZ div = 0)
  1176. [    4.566489] [BT_RFKILL]: Enter rfkill_rk_set_power
  1177. [    4.566497] [BT_RFKILL]: Set blocked:0
  1178. [    4.566501] [BT_RFKILL]: Enter rfkill_rk_sleep_bt
  1179. [    4.566506] [BT_RFKILL]: *** bt sleep: 0 ***
  1180. [    4.566554] [BT_RFKILL]: ENABLE UART_RTS
  1181. [    4.666785] [BT_RFKILL]: DISABLE UART_RTS
  1182. [    4.666832] [BT_RFKILL]: bt turn on power
  1183. [    5.388271] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 86
  1184. [    5.388420] sdioh_start: set sd_f2_blocksize 256
  1185. [    5.389551]
  1186.                
  1187.                dhd_bus_devreset: == WLAN ON ==
  1188. [    5.389878] F1 signature read @0x18000000=0x15294345
  1189. [    5.393117] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x9 pkg:0x2
  1190. [    5.393745] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000
  1191. [    5.393822] dhd_bus_set_default_min_res_mask: Unhandled chip id
  1192. [    5.394842] dhd_conf_read_config: Ignore config file /lib/firmware/brcm/config.txt
  1193. [    5.394871] Final fw_path=/lib/firmware/brcm/fw_bcm43456c5_ag.bin
  1194. [    5.394878] Final nv_path=/lib/firmware/brcm/nvram_ap6256.txt
  1195. [    5.394884] Final clm_path=/lib/firmware/brcm/clm.blob
  1196. [    5.394891] Final conf_path=/lib/firmware/brcm/config.txt
  1197. [    5.395344] dhd_os_open_image: /lib/firmware/brcm/fw_bcm43456c5_ag.bin (482927 bytes) open success
  1198. [    5.444945] dhd_os_open_image: /lib/firmware/brcm/nvram_ap6256.txt (2196 bytes) open success
  1199. [    5.445408] NVRAM version: AP6256_NVRAM_V1.1_08252017
  1200. [    5.446085] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  1201. [    5.521694] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
  1202. [    5.522125] dhd_get_memdump_info: File [/data/misc/wifi/.memdump.info] doesn't exist
  1203. [    5.522130] dhd_get_memdump_info: MEMDUMP ENABLED = 2
  1204. [    5.523779] Disable tdls_auto_op failed. -1
  1205. [    5.523800] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 1
  1206. [    5.525337] dhd_apply_default_clm: Ignore clm file /lib/firmware/brcm/clm.blob
  1207. [    5.527851] Firmware up: op_mode=0x0005, MAC=6c:21:a2:41:d9:2e
  1208. [    5.542781]   Driver: 1.579.77.41.10 (r)
  1209.                  Firmware: wl0: Jun 16 2017 12:38:26 version 7.45.96.2 (66c4e21@sh-git) (r) FWID 01-1813af84
  1210.                  CLM: 9.2.9
  1211. [    5.543109] dhd_txglom_enable: enable 1
  1212. [    5.543128] dhd_conf_set_txglom_params: txglom_mode=copy
  1213. [    5.543134] dhd_conf_set_txglom_params: txglomsize=36, deferred_tx_len=0
  1214. [    5.543139] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1
  1215. [    5.543143] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=-1
  1216. [    5.543154] dhd_conf_get_disable_proptx: fw_proptx=1, disable_proptx=-1
  1217. [    5.544577] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
  1218. [    5.546495] dhd_pno_init: Support Android Location Service
  1219. [    5.566632] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created
  1220. [    5.567963] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23
  1221. [    5.567977] dhd_rtt_init : FTM is not supported
  1222. [    5.567984] dhd_preinit_ioctls: SensorHub diabled 0
  1223. [    5.568918] dhd_preinit_ioctls failed to set ShubHub disable
  1224. [    5.571309] dhd_conf_set_country: set country CN, revision 38
  1225. [    5.571316] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created
  1226. [    5.574232] Country code: CN (CN/38)
  1227. [    5.577030] CONFIG-ERROR) dhd_conf_set_intiovar: txbf setting failed -23
  1228. [    5.577356] wl_android_wifi_on: Success
  1229. [    5.604092] dhd_open : the lock is released.
  1230. [    5.604106] dhd_open: Exit ret=0
  1231. [    6.164778] P2P interface registered
  1232. [    6.164802] wl_cfgp2p_add_p2p_disc_if: wdev: ffffffc0f0175000, wdev->net:           (null)
  1233. [    6.176761] WLC_E_IF: NO_IF set, event Ignored
  1234. [    6.178391] P2P interface started
  1235. [    6.208172] wl_run_escan: LEGACY_SCAN sync ID: 0, bssidx: 0
  1236. [    8.670177] wl_run_escan: LEGACY_SCAN sync ID: 1, bssidx: 0
  1237. [   11.020581] Connecting with 40:0d:10:21:66:ef ssid "YabbaDabbaDoo", len (13) channel=44
  1238.  
  1239. [   11.025471] dhd_dbg_start_pkt_monitor, 1724
  1240. [   11.085231] wl_iw_event: Link UP with 40:0d:10:21:66:ef
  1241. [   11.085334] wl_bss_connect_done succeeded with 40:0d:10:21:66:ef
  1242. [   11.104527] wl_bss_connect_done succeeded with 40:0d:10:21:66:ef
  1243. [   17.055365] [BT_RFKILL]: Enter rfkill_rk_set_power
  1244. [   17.055381] [BT_RFKILL]: Set blocked:0
  1245. [   17.055388] [BT_RFKILL]: Enter rfkill_rk_sleep_bt
  1246. [   17.055397] [BT_RFKILL]: *** bt sleep: 0 ***
  1247. [   17.055459] [BT_RFKILL]: ENABLE UART_RTS
  1248. [   17.155787] [BT_RFKILL]: DISABLE UART_RTS
  1249. [   17.155851] [BT_RFKILL]: bt turn on power
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!
 
Top