SHARE
TWEET

opensuse11_2_no_usb

a guest Nov 13th, 2009 88 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Linux version 2.6.31.5-0.1-desktop (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP PREEMPT 2009-10
  2. -26 15:49:03 +0100
  3. [    0.000000] Command line: root=/dev/disk/by-id/ata-Hitachi_HDT721010SLA360_STF604MH0P8HWB-part2 resume=/dev/disk/by-id/ata-Hitachi_HDT721010SLA360_STF604M
  4. H0P8HWB-part1 splash=silent quiet vga=0x317
  5. [    0.000000] KERNEL supported cpus:
  6. [    0.000000]   Intel GenuineIntel
  7. [    0.000000]   AMD AuthenticAMD
  8. [    0.000000]   Centaur CentaurHauls
  9. [    0.000000] BIOS-provided physical RAM map:
  10. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
  11. [    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
  12. [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  13. [    0.000000]  BIOS-e820: 0000000000100000 - 00000000b7fe0000 (usable)
  14. [    0.000000]  BIOS-e820: 00000000b7fe0000 - 00000000b7fe3000 (ACPI NVS)
  15. [    0.000000]  BIOS-e820: 00000000b7fe3000 - 00000000b7ff0000 (ACPI data)
  16. [    0.000000]  BIOS-e820: 00000000b7ff0000 - 00000000c0000000 (reserved)
  17. [    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
  18. [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
  19. [    0.000000]  BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
  20. [    0.000000] DMI 2.5 present.
  21. [    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
  22. [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  23. [    0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000
  24. [    0.000000] MTRR default type: uncachable
  25. [    0.000000] MTRR fixed ranges enabled:
  26. [    0.000000]   00000-9FFFF write-back
  27. [    0.000000]   A0000-BFFFF uncachable
  28. [    0.000000]   C0000-CFFFF write-protect
  29. [    0.000000]   D0000-FFFFF uncachable
  30. [    0.000000] MTRR variable ranges enabled:
  31. [    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
  32. [    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
  33. [    0.000000]   2 base 000100000000 mask FFFF00000000 write-back
  34. [    0.000000]   3 base 000200000000 mask FFFFC0000000 write-back
  35. [    0.000000]   4 disabled
  36. [    0.000000]   5 disabled
  37. [    0.000000]   6 disabled
  38. [    0.000000]   7 disabled
  39. [    0.000000] TOM2: 0000000240000000 aka 9216M
  40. [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  41. [    0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
  42. [    0.000000] last_pfn = 0xb7fe0 max_arch_pfn = 0x400000000
  43. [    0.000000] Scanning 0 areas for low memory corruption
  44. [    0.000000] modified physical RAM map:
  45. [    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
  46. [    0.000000]  modified: 0000000000010000 - 000000000009f400 (usable)
  47. [    0.000000]  modified: 000000000009f400 - 00000000000a0000 (reserved)
  48. [    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
  49. [    0.000000]  modified: 0000000000100000 - 00000000b7fe0000 (usable)
  50. [    0.000000]  modified: 00000000b7fe0000 - 00000000b7fe3000 (ACPI NVS)
  51. [    0.000000]  modified: 00000000b7fe3000 - 00000000b7ff0000 (ACPI data)
  52. [    0.000000]  modified: 00000000b7ff0000 - 00000000c0000000 (reserved)
  53. [    0.000000]  modified: 00000000f0000000 - 00000000f4000000 (reserved)
  54. [    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
  55. [    0.000000]  modified: 0000000100000000 - 0000000240000000 (usable)
  56. [    0.000000] initial memory mapped : 0 - 20000000
  57. [    0.000000] Using GB pages for direct mapping
  58. [    0.000000] init_memory_mapping: 0000000000000000-00000000b7fe0000
  59. [    0.000000]  0000000000 - 0080000000 page 1G
  60. [    0.000000]  0080000000 - 00b7e00000 page 2M
  61. [    0.000000]  00b7e00000 - 00b7fe0000 page 4k
  62. [    0.000000] kernel direct mapping tables up to b7fe0000 @ 10000-13000
  63. [    0.000000] init_memory_mapping: 0000000100000000-0000000240000000
  64. [    0.000000]  0100000000 - 0240000000 page 1G
  65. [    0.000000] kernel direct mapping tables up to 240000000 @ 12000-13000
  66. [    0.000000] RAMDISK: 379ca000 - 37fef4c3
  67. [    0.000000] ACPI: RSDP 00000000000f7fd0 00014 (v00 EVGA  )
  68. [    0.000000] ACPI: RSDT 00000000b7fe3000 00038 (v01 EVGA   NVDAACPI 42302E31 NVDA 00000000)
  69. [    0.000000] ACPI: FACP 00000000b7fe3080 00074 (v01 EVGA   NVDAACPI 42302E31 NVDA 00000000)
  70. [    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 20090521 tbfadt-558
  71. [    0.000000] ACPI: DSDT 00000000b7fe3100 0A15F (v01 EVGA   NVDAACPI 00001000 MSFT 03000000)
  72. [    0.000000] ACPI: FACS 00000000b7fe1900 00040
  73. [    0.000000] ACPI: SSDT 00000000b7fed340 00544 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
  74. [    0.000000] ACPI: HPET 00000000b7fed8c0 00038 (v01 EVGA   NVDAACPI 42302E31 NVDA 00000098)
  75. [    0.000000] ACPI: MCFG 00000000b7fed900 0003C (v01 EVGA   NVDAACPI 42302E31 NVDA 00000000)
  76. [    0.000000] ACPI: APIC 00000000b7fed280 0008E (v01 EVGA   NVDAACPI 42302E31 NVDA 00000000)
  77. [    0.000000] ACPI: Local APIC address 0xfee00000
  78. [    0.000000] Scanning NUMA topology in Northbridge 24
  79. [    0.000000] No NUMA configuration found
  80. [    0.000000] Faking a node at 0000000000000000-0000000240000000
  81. [    0.000000] Bootmem setup node 0 0000000000000000-0000000240000000
  82. [    0.000000]   NODE_DATA [0000000000012000 - 0000000000029fff]
  83. [    0.000000]   bootmap [000000000002a000 -  0000000000071fff] pages 48
  84. [    0.000000] (7 early reservations) ==> bootmem [0000000000 - 0240000000]
  85. [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  86. [    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  87. [    0.000000]   #2 [0001000000 - 0001c4bf70]    TEXT DATA BSS ==> [0001000000 - 0001c4bf70]
  88. [    0.000000]   #3 [00379ca000 - 0037fef4c3]          RAMDISK ==> [00379ca000 - 0037fef4c3]
  89. [    0.000000]   #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
  90. [    0.000000]   #5 [0001c4c000 - 0001c4c0af]              BRK ==> [0001c4c000 - 0001c4c0af]
  91. [    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
  92. [    0.000000] found SMP MP-table at [ffff8800000f3fe0] f3fe0
  93. [    0.000000]  [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880001e00000-ffff880008dfffff] on node 0
  94. [    0.000000] Zone PFN ranges:
  95. [    0.000000]   DMA      0x00000010 -> 0x00001000
  96. [    0.000000]   DMA32    0x00001000 -> 0x00100000
  97. [    0.000000]   Normal   0x00100000 -> 0x00240000
  98. [    0.000000] Movable zone start PFN for each node
  99. [    0.000000] early_node_map[3] active PFN ranges
  100. [    0.000000]     0: 0x00000010 -> 0x0000009f
  101. [    0.000000]     0: 0x00000100 -> 0x000b7fe0
  102. [    0.000000]     0: 0x00100000 -> 0x00240000
  103. [    0.000000] On node 0 totalpages: 2064239
  104. [    0.000000]   DMA zone: 56 pages used for memmap
  105. [    0.000000]   DMA zone: 102 pages reserved
  106. [    0.000000]   DMA zone: 3825 pages, LIFO batch:0
  107. [    0.000000]   DMA32 zone: 14280 pages used for memmap
  108. [    0.000000]   DMA32 zone: 735256 pages, LIFO batch:31
  109. [    0.000000]   Normal zone: 17920 pages used for memmap
  110. [    0.000000]   Normal zone: 1292800 pages, LIFO batch:31
  111. [    0.000000] ACPI: PM-Timer IO Port: 0x1008
  112. [    0.000000] ACPI: Local APIC address 0xfee00000
  113. [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  114. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  115. [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
  116. [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
  117. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  118. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  119. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
  120. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
  121. [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
  122. [    0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
  123. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  124. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  125. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
  126. [    0.000000] ACPI: IRQ0 used by override.
  127. [    0.000000] ACPI: IRQ2 used by override.
  128. [    0.000000] ACPI: IRQ9 used by override.
  129. [    0.000000] ACPI: IRQ14 used by override.
  130. [    0.000000] Using ACPI (MADT) for SMP configuration information
  131. [    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
  132. [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
  133. [    0.000000] nr_irqs_gsi: 24
  134. [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  135. [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
  136. [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
  137. [    0.000000] PM: Registered nosave memory: 00000000b7fe0000 - 00000000b7fe3000
  138. [    0.000000] PM: Registered nosave memory: 00000000b7fe3000 - 00000000b7ff0000
  139. [    0.000000] PM: Registered nosave memory: 00000000b7ff0000 - 00000000c0000000
  140. [    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
  141. [    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
  142. [    0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
  143. [    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
  144. [    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
  145. [    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
  146. [    0.000000] PERCPU: Embedded 28 pages at ffff880008e4a000, static data 82784 bytes
  147. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2031881
  148. [    0.000000] Policy zone: Normal
  149. [    0.000000] Kernel command line: root=/dev/disk/by-id/ata-Hitachi_HDT721010SLA360_STF604MH0P8HWB-part2 resume=/dev/disk/by-id/ata-Hitachi_HDT721010SLA360_
  150. STF604MH0P8HWB-part1 splash=silent quiet vga=0x317
  151. [    0.000000] bootsplash: silent mode.
  152. [    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
  153. [    0.000000] Initializing CPU#0
  154. [    0.000000] Checking aperture...
  155. [    0.000000] No AGP bridge found
  156. [    0.000000] Node 0: aperture @ bef4000000 size 32 MB
  157. [    0.000000] Aperture beyond 4GB. Ignoring.
  158. [    0.000000] Your BIOS doesn't leave a aperture memory hole
  159. [    0.000000] Please enable the IOMMU option in the BIOS setup
  160. [    0.000000] This costs you 64 MB of RAM
  161. [    0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
  162. [    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
  163. [    0.000000] Memory: 8056920k/9437184k available (5497k kernel code, 1180228k absent, 200036k reserved, 4473k data, 980k init)
  164. [    0.000000] Hierarchical RCU implementation.
  165. [    0.000000] NR_IRQS:4352 nr_irqs:440
  166. [    0.000000] Fast TSC calibration using PIT
  167. [    0.000000] Detected 2600.159 MHz processor.
  168. [    0.000014] spurious 8259A interrupt: IRQ7.
  169. [    0.000093] Console: colour dummy device 80x25
  170. [    0.000095] console [tty0] enabled
  171. [    0.000275] hpet clockevent registered
  172. [    0.000279] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
  173. [    0.000285] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.31 BogoMIPS (lpj=2600155)
  174. [    0.010668] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
  175. [    0.010755] Security Framework initialized
  176. [    0.010774] AppArmor: AppArmor initialized
  177. [    0.011382] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  178. [    0.015191] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  179. [    0.017160] Mount-cache hash table entries: 256
  180. [    0.017320] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  181. [    0.017322] CPU: L2 Cache: 512K (64 bytes/line)
  182. [    0.017325] CPU 0/0x0 -> Node 0
  183. [    0.017329] tseg: 0000000000
  184. [    0.017341] CPU: Physical Processor ID: 0
  185. [    0.017342] CPU: Processor Core ID: 0
  186. [    0.017345] mce: CPU supports 6 MCE banks
  187. [    0.017353] using C1E aware idle routine
  188. [    0.017355] Performance Counters: AMD PMU driver.
  189. [    0.017360] ... version:                 0
  190. [    0.017361] ... bit width:               48
  191. [    0.017362] ... generic counters:        4
  192. [    0.017364] ... value mask:              0000ffffffffffff
  193. [    0.017365] ... max period:              00007fffffffffff
  194. [    0.017366] ... fixed-purpose counters:  0
  195. [    0.017368] ... counter mask:            000000000000000f
  196. [    0.017913] ACPI: Core revision 20090521
  197. [    0.035068] Setting APIC routing to flat
  198. [    0.035549] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  199. [    0.045830] CPU0: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
  200. [    0.045993] Booting processor 1 APIC 0x1 ip 0x6000
  201. [    0.000999] Initializing CPU#1
  202. [    0.000999] Calibrating delay using timer specific routine.. 5200.09 BogoMIPS (lpj=2600048)
  203. [    0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  204. [    0.000999] CPU: L2 Cache: 512K (64 bytes/line)
  205. [    0.000999] CPU 1/0x1 -> Node 0
  206. [    0.000999] CPU: Physical Processor ID: 0
  207. [    0.000999] CPU: Processor Core ID: 1
  208. [    0.000999] mce: CPU supports 6 MCE banks
  209. [    0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
  210. [    0.116686] CPU1: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
  211. [    0.116698] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
  212. [    0.117005] System has AMD C1E enabled
  213. [    0.117018] Switch to broadcast mode on CPU0
  214. [    0.117025] Switch to broadcast mode on CPU1
  215. [    0.117052] Booting processor 2 APIC 0x2 ip 0x6000
  216. [    0.000999] Initializing CPU#2
  217. [    0.000999] Calibrating delay using timer specific routine.. 5200.35 BogoMIPS (lpj=2600176)
  218. [    0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  219. [    0.000999] CPU: L2 Cache: 512K (64 bytes/line)
  220. [    0.000999] CPU 2/0x2 -> Node 0
  221. [    0.000999] CPU: Physical Processor ID: 0
  222. [    0.000999] CPU: Processor Core ID: 2
  223. [    0.000999] mce: CPU supports 6 MCE banks
  224. [    0.000999] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
  225. [    0.188624] CPU2: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
  226. [    0.188636] checking TSC synchronization [CPU#1 -> CPU#2]: passed.
  227. [    0.208011] Switch to broadcast mode on CPU2
  228. [    0.208037] Booting processor 3 APIC 0x3 ip 0x6000
  229. [    0.000999] Initializing CPU#3
  230. [    0.000999] Calibrating delay using timer specific routine.. 5200.33 BogoMIPS (lpj=2600169)
  231. [    0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  232. [    0.000999] CPU: L2 Cache: 512K (64 bytes/line)
  233. [    0.000999] CPU 3/0x3 -> Node 0
  234. [    0.000999] CPU: Physical Processor ID: 0
  235. [    0.000999] CPU: Processor Core ID: 3
  236. [    0.000999] mce: CPU supports 6 MCE banks
  237. [    0.000999] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
  238. [    0.279629] CPU3: AMD Phenom(tm) 9950 Quad-Core Processor stepping 03
  239. [    0.279641] checking TSC synchronization [CPU#2 -> CPU#3]: passed.
  240. [    0.298980] Brought up 4 CPUs
  241. [    0.298984] Total of 4 processors activated (20801.09 BogoMIPS).
  242. [    0.299102] CPU0 attaching sched-domain:
  243. [    0.299106]  domain 0: span 0-3 level MC
  244. [    0.299108]   groups: 0 1 2 3
  245. [    0.299115] CPU1 attaching sched-domain:
  246. [    0.299117]  domain 0: span 0-3 level MC
  247. [    0.299119]   groups: 1 2 3 0
  248. [    0.299127] CPU2 attaching sched-domain:
  249. [    0.299128]  domain 0: span 0-3 level MC
  250. [    0.299130]   groups: 2 3 0 1
  251. [    0.299135] CPU3 attaching sched-domain:
  252. [    0.299136]  domain 0: span 0-3 level MC
  253. [    0.299138]   groups: 3 0 1 2
  254. [    0.299223] Switch to broadcast mode on CPU3
  255. [    0.300009] devtmpfs: initialized
  256. [    0.302968] Booting paravirtualized kernel on bare hardware
  257. [    0.303133] regulator: core version 0.5
  258. [    0.303133] Time:  8:29:35  Date: 11/13/09
  259. [    0.303133] NET: Registered protocol family 16
  260. [    0.303226] node 0 link 0: io port [7000, ffff]
  261. [    0.303229] TOM: 00000000c0000000 aka 3072M
  262. [    0.303231] Fam 10h mmconf [f0000000, f00fffff]
  263. [    0.303233] node 0 link 0: mmio [a0000, bffff]
  264. [    0.303235] node 0 link 0: mmio [c0000000, efffffff]
  265. [    0.303238] node 0 link 0: mmio [f4000000, fe02ffff]
  266. [    0.303240] node 0 link 0: mmio [f0000000, f05fffff] ==> [f0100000, f05fffff]
  267. [    0.303243] TOM2: 0000000240000000 aka 9216M
  268. [    0.303246] bus: [00,06] on node 0 link 0
  269. [    0.303247] bus: 00 index 0 io port: [0, ffff]
  270. [    0.303249] bus: 00 index 1 mmio: [a0000, bffff]
  271. [    0.303251] bus: 00 index 2 mmio: [c0000000, efffffff]
  272. [    0.303253] bus: 00 index 3 mmio: [f0600000, ffffffff]
  273. [    0.303254] bus: 00 index 4 mmio: [f0100000, f05fffff]
  274. [    0.303256] bus: 00 index 5 mmio: [240000000, fcffffffff]
  275. [    0.303267] ACPI: bus type pci registered
  276. [    0.303334] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
  277. [    0.303337] PCI: MCFG area at f0000000 reserved in E820
  278. [    0.304558] PCI: Using MMCONFIG at f0000000 - f3ffffff
  279. [    0.304560] PCI: Using configuration type 1 for base access
  280. [    0.306075] bio: create slab <bio-0> at 0
  281. [    0.307268] ACPI: EC: Look up EC in DSDT
  282. [    0.323913] ACPI: Interpreter enabled
  283. [    0.323916] ACPI: (supports S0 S1 S3 S4 S5)
  284. [    0.323950] ACPI: Using IOAPIC for interrupt routing
  285. [    0.346962] ACPI: No dock devices found.
  286. [    0.348757] ACPI: PCI Root Bridge [PCI0] (0000:00)
  287. [    0.349043] pci 0000:00:01.0: reg 18 io port: [0x1d00-0x1dff]
  288. [    0.349079] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f]
  289. [    0.349089] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
  290. [    0.349093] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
  291. [    0.349113] pci 0000:00:01.1: PME# supported from D3hot D3cold
  292. [    0.349119] pci 0000:00:01.1: PME# disabled
  293. [    0.349175] pci 0000:00:01.3: reg 10 32bit mmio: [0xfdf80000-0xfdffffff]
  294. [    0.349299] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
  295. [    0.349321] pci 0000:00:02.0: supports D1 D2
  296. [    0.349323] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
  297. [    0.349326] pci 0000:00:02.0: PME# disabled
  298. [    0.349348] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
  299. [    0.349375] pci 0000:00:02.1: supports D1 D2
  300. [    0.349376] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
  301. [    0.349379] pci 0000:00:02.1: PME# disabled
  302. [    0.349405] pci 0000:00:04.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
  303. [    0.349428] pci 0000:00:04.0: supports D1 D2
  304. [    0.349429] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
  305. [    0.349432] pci 0000:00:04.0: PME# disabled
  306. [    0.349454] pci 0000:00:04.1: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff]
  307. [    0.349481] pci 0000:00:04.1: supports D1 D2
  308. [    0.349482] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
  309. [    0.349485] pci 0000:00:04.1: PME# disabled
  310. [    0.349519] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
  311. [    0.349549] pci 0000:00:07.0: reg 10 32bit mmio: [0xfe020000-0xfe023fff]
  312. [    0.349572] pci 0000:00:07.0: PME# supported from D3hot D3cold
  313. [    0.349574] pci 0000:00:07.0: PME# disabled
  314. [    0.349624] pci 0000:00:09.0: reg 10 io port: [0x9f0-0x9f7]
  315. [    0.349628] pci 0000:00:09.0: reg 14 io port: [0xbf0-0xbf3]
  316. [    0.349631] pci 0000:00:09.0: reg 18 io port: [0x970-0x977]
  317. [    0.349634] pci 0000:00:09.0: reg 1c io port: [0xb70-0xb73]
  318. [    0.349638] pci 0000:00:09.0: reg 20 io port: [0xdc00-0xdc0f]
  319. [    0.349641] pci 0000:00:09.0: reg 24 32bit mmio: [0xfe026000-0xfe027fff]
  320. [    0.349683] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
  321. [    0.349685] pci 0000:00:0b.0: PME# disabled
  322. [    0.349891] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
  323. [    0.349898] pci 0000:00:10.0: PME# disabled
  324. [    0.350147] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
  325. [    0.350154] pci 0000:00:12.0: PME# disabled
  326. [    0.350395] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
  327. [    0.350402] pci 0000:00:13.0: PME# disabled
  328. [    0.350650] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
  329. [    0.350657] pci 0000:00:14.0: PME# disabled
  330. [    0.350804] pci 0000:01:07.0: reg 10 32bit mmio: [0xfdeff000-0xfdeff7ff]
  331. [    0.350809] pci 0000:01:07.0: reg 14 32bit mmio: [0xfdef8000-0xfdefbfff]
  332. [    0.350841] pci 0000:01:07.0: supports D1 D2
  333. [    0.350843] pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot
  334. [    0.350846] pci 0000:01:07.0: PME# disabled
  335. [    0.350874] pci 0000:00:08.0: transparent bridge
  336. [    0.350877] pci 0000:00:08.0: bridge io port: [0xc000-0xcfff]
  337. [    0.350880] pci 0000:00:08.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
  338. [    0.350883] pci 0000:00:08.0: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff]
  339. [    0.350900] pci 0000:02:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
  340. [    0.350905] pci 0000:02:00.0: reg 14 64bit mmio: [0xd8000000-0xdfffffff]
  341. [    0.350910] pci 0000:02:00.0: reg 1c 64bit mmio: [0xe6000000-0xe7ffffff]
  342. [    0.350913] pci 0000:02:00.0: reg 24 io port: [0xbc00-0xbc7f]
  343. [    0.350917] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
  344. [    0.350943] pci 0000:00:0b.0: bridge io port: [0xb000-0xbfff]
  345. [    0.350946] pci 0000:00:0b.0: bridge 32bit mmio: [0xfb000000-0xfcffffff]
  346. [    0.350949] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xd8000000-0xe7ffffff]
  347. [    0.351008] pci 0000:00:10.0: bridge io port: [0xa000-0xafff]
  348. [    0.351015] pci 0000:00:10.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
  349. [    0.351028] pci 0000:00:10.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
  350. [    0.351087] pci 0000:04:00.0: reg 10 64bit mmio: [0xfdaff000-0xfdaff07f]
  351. [    0.351100] pci 0000:04:00.0: reg 18 64bit mmio: [0xfdaf8000-0xfdafbfff]
  352. [    0.351108] pci 0000:04:00.0: reg 20 io port: [0x9c00-0x9c7f]
  353. [    0.351121] pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x07ffff]
  354. [    0.351155] pci 0000:04:00.0: supports D1 D2
  355. [    0.351183] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
  356. [    0.351289] pci 0000:00:12.0: bridge io port: [0x9000-0x9fff]
  357. [    0.351296] pci 0000:00:12.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
  358. [    0.351309] pci 0000:00:12.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff]
  359. [    0.351351] pci 0000:05:00.0: reg 10 io port: [0x8c00-0x8cff]
  360. [    0.351364] pci 0000:05:00.0: reg 18 64bit mmio: [0xfd8ff000-0xfd8fffff]
  361. [    0.351374] pci 0000:05:00.0: reg 20 64bit mmio: [0xfd7f0000-0xfd7fffff]
  362. [    0.351380] pci 0000:05:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
  363. [    0.351407] pci 0000:05:00.0: supports D1 D2
  364. [    0.351409] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  365. [    0.351412] pci 0000:05:00.0: PME# disabled
  366. [    0.354115] pci 0000:00:13.0: bridge io port: [0x8000-0x8fff]
  367. [    0.354122] pci 0000:00:13.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff]
  368. [    0.354136] pci 0000:00:13.0: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff]
  369. [    0.354192] pci 0000:00:14.0: bridge io port: [0x7000-0x7fff]
  370. [    0.354199] pci 0000:00:14.0: bridge 32bit mmio: [0xfd600000-0xfd6fffff]
  371. [    0.354212] pci 0000:00:14.0: bridge 64bit mmio pref: [0xfd500000-0xfd5fffff]
  372. [    0.354268] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  373. [    0.354675] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
  374. [    0.552411] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  375. [    0.552649] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
  376. [    0.552887] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  377. [    0.553138] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  378. [    0.553374] ACPI: PCI Interrupt Link [LE0A] (IRQs 5 7 9 *10 11 14 15)
  379. [    0.553616] ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 10 *11 14 15)
  380. [    0.553853] ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  381. [    0.554099] ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  382. [    0.554332] ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  383. [    0.554565] ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  384. [    0.554799] ACPI: PCI Interrupt Link [LE1C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  385. [    0.555037] ACPI: PCI Interrupt Link [LE1D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  386. [    0.555274] ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  387. [    0.555513] ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  388. [    0.555746] ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  389. [    0.555978] ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  390. [    0.556227] ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  391. [    0.556457] ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  392. [    0.556688] ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  393. [    0.556919] ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  394. [    0.557161] ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  395. [    0.557396] ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  396. [    0.557632] ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  397. [    0.557868] ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  398. [    0.558105] ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  399. [    0.558336] ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  400. [    0.558572] ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  401. [    0.558804] ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  402. [    0.559046] ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  403. [    0.559282] ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  404. [    0.559516] ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  405. [    0.559747] ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  406. [    0.559984] ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  407. [    0.560228] ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  408. [    0.560467] ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  409. [    0.560705] ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  410. [    0.560934] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  411. [    0.561176] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
  412. [    0.561407] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  413. [    0.561643] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  414. [    0.561878] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 *7 9 10 11 14 15), disabled.
  415. [    0.562124] ACPI: PCI Interrupt Link [LU2B] (IRQs *5 7 9 10 11 14 15), disabled.
  416. [    0.562357] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
  417. [    0.562591] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15)
  418. [    0.562829] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15)
  419. [    0.563076] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
  420. [    0.563316] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
  421. [    0.563554] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
  422. [    0.563850] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
  423. [    0.564138] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
  424. [    0.564414] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
  425. [    0.564693] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
  426. [    0.564971] ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0
  427. [    0.565255] ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0
  428. [    0.565532] ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled.
  429. [    0.565810] ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled.
  430. [    0.566096] ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0, disabled.
  431. [    0.566374] ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled.
  432. [    0.566653] ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0, disabled.
  433. [    0.566937] ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0, disabled.
  434. [    0.567219] ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled.
  435. [    0.567493] ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled.
  436. [    0.567773] ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled.
  437. [    0.568058] ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled.
  438. [    0.568337] ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled.
  439. [    0.568621] ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled.
  440. [    0.568894] ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled.
  441. [    0.569188] ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled.
  442. [    0.569467] ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0, disabled.
  443. [    0.569741] ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled.
  444. [    0.570029] ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled.
  445. [    0.570310] ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled.
  446. [    0.570584] ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled.
  447. [    0.570862] ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled.
  448. [    0.571152] ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled.
  449. [    0.571426] ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled.
  450. [    0.571711] ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled.
  451. [    0.571992] ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled.
  452. [    0.572276] ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled.
  453. [    0.572555] ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled.
  454. [    0.572829] ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled.
  455. [    0.573114] ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled.
  456. [    0.573393] ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled.
  457. [    0.573677] ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled.
  458. [    0.573953] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
  459. [    0.574242] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0, disabled.
  460. [    0.574522] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0, disabled.
  461. [    0.574802] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
  462. [    0.575097] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0, disabled.
  463. [    0.575379] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
  464. [    0.575661] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
  465. [    0.575940] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
  466. [    0.576227] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
  467. [    0.576503] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
  468. [    0.576790] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
  469. [    0.577080] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
  470. [    0.577322] SCSI subsystem initialized
  471. [    0.578011] libata version 3.00 loaded.
  472. [    0.578038] usbcore: registered new interface driver usbfs
  473. [    0.578039] usbcore: registered new interface driver hub
  474. [    0.578043] usbcore: registered new device driver usb
  475. [    0.578043] PCI: Using ACPI for IRQ routing
  476. [    0.580296] PCI-DMA: Disabling AGP.
  477. [    0.580377] PCI-DMA: aperture base @ 20000000 size 65536 KB
  478. [    0.580379] PCI-DMA: using GART IOMMU.
  479. [    0.580382] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
  480. [    0.581822] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
  481. [    0.581829] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
  482. [    0.589016] Switched to high resolution mode on CPU 1
  483. [    0.589019] Switched to high resolution mode on CPU 0
  484. [    0.589023] Switched to high resolution mode on CPU 2
  485. [    0.589028] Switched to high resolution mode on CPU 3
  486. [    0.589352] AppArmor: AppArmor Filesystem Enabled
  487. [    0.593767] pnp: PnP ACPI init
  488. [    0.593787] ACPI: bus type pnp registered
  489. [    0.604949] pnp: PnP ACPI: found 14 devices
  490. [    0.604952] ACPI: ACPI bus type pnp unregistered
  491. [    0.604964] system 00:01: ioport range 0x1000-0x107f has been reserved
  492. [    0.604967] system 00:01: ioport range 0x1080-0x10ff has been reserved
  493. [    0.604969] system 00:01: ioport range 0x1400-0x147f has been reserved
  494. [    0.604972] system 00:01: ioport range 0x1480-0x14ff has been reserved
  495. [    0.604974] system 00:01: ioport range 0x1800-0x187f has been reserved
  496. [    0.604977] system 00:01: ioport range 0x1880-0x18ff has been reserved
  497. [    0.604980] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
  498. [    0.604983] system 00:01: iomem range 0xb8000000-0xbfffffff has been reserved
  499. [    0.604988] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
  500. [    0.604990] system 00:02: ioport range 0x800-0x805 has been reserved
  501. [    0.604997] system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved
  502. [    0.605008] system 00:0d: iomem range 0xf0000-0xfffff could not be reserved
  503. [    0.605010] system 00:0d: iomem range 0xfeff0000-0xfeff00ff has been reserved
  504. [    0.605013] system 00:0d: iomem range 0xb7fe0000-0xb7ffffff could not be reserved
  505. [    0.605015] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved
  506. [    0.605018] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
  507. [    0.605020] system 00:0d: iomem range 0x100000-0xb7fdffff could not be reserved
  508. [    0.605023] system 00:0d: iomem range 0xb8000000-0xbfffffff has been reserved
  509. [    0.605025] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
  510. [    0.605028] system 00:0d: iomem range 0xfee00000-0xfeefffff has been reserved
  511. [    0.605030] system 00:0d: iomem range 0xfefff000-0xfeffffff has been reserved
  512. [    0.605033] system 00:0d: iomem range 0xfff80000-0xfff80fff has been reserved
  513. [    0.605039] system 00:0d: iomem range 0xfff90000-0xfffbffff has been reserved
  514. [    0.605041] system 00:0d: iomem range 0xfffed000-0xfffeffff has been reserved
  515. [    0.609940] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
  516. [    0.609943] pci 0000:00:08.0:   IO window: 0xc000-0xcfff
  517. [    0.609947] pci 0000:00:08.0:   MEM window: 0xfde00000-0xfdefffff
  518. [    0.609950] pci 0000:00:08.0:   PREFETCH window: 0xfdd00000-0xfddfffff
  519. [    0.609956] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
  520. [    0.609958] pci 0000:00:0b.0:   IO window: 0xb000-0xbfff
  521. [    0.609961] pci 0000:00:0b.0:   MEM window: 0xfb000000-0xfcffffff
  522. [    0.609964] pci 0000:00:0b.0:   PREFETCH window: 0x000000d8000000-0x000000e7ffffff
  523. [    0.609967] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
  524. [    0.609971] pci 0000:00:10.0:   IO window: 0xa000-0xafff
  525. [    0.609981] pci 0000:00:10.0:   MEM window: 0xfdc00000-0xfdcfffff
  526. [    0.609988] pci 0000:00:10.0:   PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
  527. [    0.610006] pci 0000:00:12.0: PCI bridge, secondary bus 0000:04
  528. [    0.610012] pci 0000:00:12.0:   IO window: 0x9000-0x9fff
  529. [    0.610022] pci 0000:00:12.0:   MEM window: 0xfda00000-0xfdafffff
  530. [    0.610029] pci 0000:00:12.0:   PREFETCH window: 0x000000fd900000-0x000000fd9fffff
  531. [    0.610041] pci 0000:00:13.0: PCI bridge, secondary bus 0000:05
  532. [    0.610046] pci 0000:00:13.0:   IO window: 0x8000-0x8fff
  533. [    0.610055] pci 0000:00:13.0:   MEM window: 0xfd800000-0xfd8fffff
  534. [    0.610062] pci 0000:00:13.0:   PREFETCH window: 0x000000fd700000-0x000000fd7fffff
  535. [    0.610074] pci 0000:00:14.0: PCI bridge, secondary bus 0000:06
  536. [    0.610079] pci 0000:00:14.0:   IO window: 0x7000-0x7fff
  537. [    0.610088] pci 0000:00:14.0:   MEM window: 0xfd600000-0xfd6fffff
  538. [    0.610095] pci 0000:00:14.0:   PREFETCH window: 0x000000fd500000-0x000000fd5fffff
  539. [    0.610113] pci 0000:00:08.0: setting latency timer to 64
  540. [    0.610118] pci 0000:00:0b.0: setting latency timer to 64
  541. [    0.610583] ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16
  542. [    0.610587]   alloc irq_desc for 16 on node 0
  543. [    0.610589]   alloc kstat_irqs on node 0
  544. [    0.610598] pci 0000:00:10.0: PCI INT A -> Link[AE0A] -> GSI 16 (level, low) -> IRQ 16
  545. [    0.610606] pci 0000:00:10.0: setting latency timer to 64
  546. [    0.611043] ACPI: PCI Interrupt Link [AE2A] enabled at IRQ 16
  547. [    0.611046] pci 0000:00:12.0: PCI INT A -> Link[AE2A] -> GSI 16 (level, low) -> IRQ 16
  548. [    0.611054] pci 0000:00:12.0: setting latency timer to 64
  549. [    0.611480] ACPI: PCI Interrupt Link [AE3A] enabled at IRQ 16
  550. [    0.611487] pci 0000:00:13.0: PCI INT A -> Link[AE3A] -> GSI 16 (level, low) -> IRQ 16
  551. [    0.611495] pci 0000:00:13.0: setting latency timer to 64
  552. [    0.611918] ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16
  553. [    0.611921] pci 0000:00:14.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16
  554. [    0.611929] pci 0000:00:14.0: setting latency timer to 64
  555. [    0.611935] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
  556. [    0.611937] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
  557. [    0.611939] pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
  558. [    0.611941] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
  559. [    0.611943] pci_bus 0000:01: resource 2 pref mem [0xfdd00000-0xfddfffff]
  560. [    0.611945] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
  561. [    0.611947] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
  562. [    0.611950] pci_bus 0000:02: resource 0 io:  [0xb000-0xbfff]
  563. [    0.611952] pci_bus 0000:02: resource 1 mem: [0xfb000000-0xfcffffff]
  564. [    0.611954] pci_bus 0000:02: resource 2 pref mem [0xd8000000-0xe7ffffff]
  565. [    0.611956] pci_bus 0000:03: resource 0 io:  [0xa000-0xafff]
  566. [    0.611958] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff]
  567. [    0.611960] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff]
  568. [    0.611962] pci_bus 0000:04: resource 0 io:  [0x9000-0x9fff]
  569. [    0.611964] pci_bus 0000:04: resource 1 mem: [0xfda00000-0xfdafffff]
  570. [    0.611966] pci_bus 0000:04: resource 2 pref mem [0xfd900000-0xfd9fffff]
  571. [    0.611968] pci_bus 0000:05: resource 0 io:  [0x8000-0x8fff]
  572. [    0.611970] pci_bus 0000:05: resource 1 mem: [0xfd800000-0xfd8fffff]
  573. [    0.611972] pci_bus 0000:05: resource 2 pref mem [0xfd700000-0xfd7fffff]
  574. [    0.611974] pci_bus 0000:06: resource 0 io:  [0x7000-0x7fff]
  575. [    0.611976] pci_bus 0000:06: resource 1 mem: [0xfd600000-0xfd6fffff]
  576. [    0.611978] pci_bus 0000:06: resource 2 pref mem [0xfd500000-0xfd5fffff]
  577. [    0.612073] NET: Registered protocol family 2
  578. [    0.612357] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
  579. [    0.613897] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
  580. [    0.617019] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  581. [    0.617403] TCP: Hash tables configured (established 524288 bind 65536)
  582. [    0.617405] TCP reno registered
  583. [    0.617562] NET: Registered protocol family 1
  584. [    0.617628] Unpacking initramfs...
  585. [    0.723110] Freeing initrd memory: 6293k freed
  586. [    0.726052] Scanning for low memory corruption every 60 seconds
  587. [    0.726234] audit: initializing netlink socket (disabled)
  588. [    0.726248] type=2000 audit(1258100974.726:1): initialized
  589. [    0.729266] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  590. [    0.729479] VFS: Disk quotas dquot_6.5.2
  591. [    0.729517] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  592. [    0.729676] msgmni has been set to 3937
  593. [    0.729778] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  594. [    0.729781] io scheduler noop registered
  595. [    0.729783] io scheduler anticipatory registered
  596. [    0.729784] io scheduler deadline registered
  597. [    0.729805] io scheduler cfq registered (default)
  598. [    0.751239] pci 0000:00:08.0: Enabling HT MSI Mapping
  599. [    0.751343] pci 0000:00:09.0: Enabling HT MSI Mapping
  600. [    0.751457] pci 0000:00:0b.0: Enabling HT MSI Mapping
  601. [    0.751687] pci 0000:02:00.0: Boot video device
  602. [    0.752069]   alloc irq_desc for 24 on node 0
  603. [    0.752071]   alloc kstat_irqs on node 0
  604. [    0.752094] pcieport-driver 0000:00:10.0: irq 24 for MSI/MSI-X
  605. [    0.752114] pcieport-driver 0000:00:10.0: setting latency timer to 64
  606. [    0.752543]   alloc irq_desc for 25 on node 0
  607. [    0.752545]   alloc kstat_irqs on node 0
  608. [    0.752562] pcieport-driver 0000:00:12.0: irq 25 for MSI/MSI-X
  609. [    0.752580] pcieport-driver 0000:00:12.0: setting latency timer to 64
  610. [    0.752972]   alloc irq_desc for 26 on node 0
  611. [    0.752974]   alloc kstat_irqs on node 0
  612. [    0.752990] pcieport-driver 0000:00:13.0: irq 26 for MSI/MSI-X
  613. [    0.753013] pcieport-driver 0000:00:13.0: setting latency timer to 64
  614. [    0.753411]   alloc irq_desc for 27 on node 0
  615. [    0.753414]   alloc kstat_irqs on node 0
  616. [    0.753430] pcieport-driver 0000:00:14.0: irq 27 for MSI/MSI-X
  617. [    0.753448] pcieport-driver 0000:00:14.0: setting latency timer to 64
  618. [    0.753620] pci-stub: invalid id string ""
  619. [    0.753765] vesafb: framebuffer at 0xe7000000, mapped to 0xffffc90005800000, using 3072k, total 14336k
  620. [    0.753767] vesafb: mode is 1024x768x16, linelength=2048, pages=1
  621. [    0.753769] vesafb: scrolling: redraw
  622. [    0.753772] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
  623. [    0.753908] bootsplash 3.1.6-2004/03/31: looking for picture...
  624. [    0.762286] bootsplash: silentjpeg size 100573 bytes
  625. [    0.773608] bootsplash: ...found (1024x768, 27393 bytes, v3).
  626. [    0.800609] Console: switching to colour frame buffer device 124x44
  627. [    0.825595] fb0: VESA VGA frame buffer device
  628. [    0.826984] Non-volatile memory driver v1.3
  629. [    0.826987] Linux agpgart interface v0.103
  630. [    0.826991] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  631. [    0.827094] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  632. [    0.827437] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  633. [    0.827616] ahci 0000:00:09.0: version 3.0
  634. [    0.828123] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
  635. [    0.828127]   alloc irq_desc for 23 on node 0
  636. [    0.828128]   alloc kstat_irqs on node 0
  637. [    0.828137] ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
  638. [    0.828183]   alloc irq_desc for 28 on node 0
  639. [    0.828185]   alloc kstat_irqs on node 0
  640. [    0.828190] ahci 0000:00:09.0: irq 28 for MSI/MSI-X
  641. [    0.828256] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
  642. [    0.828259] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
  643. [    0.828262] ahci 0000:00:09.0: setting latency timer to 64
  644. [    0.828687] scsi0 : ahci
  645. [    0.828803] scsi1 : ahci
  646. [    0.828848] scsi2 : ahci
  647. [    0.828890] scsi3 : ahci
  648. [    0.828936] scsi4 : ahci
  649. [    0.828979] scsi5 : ahci
  650. [    0.829140] ata1: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 28
  651. [    0.829143] ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 28
  652. [    0.829145] ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 28
  653. [    0.829147] ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 28
  654. [    0.829151] ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 28
  655. [    0.829154] ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 28
  656. [    0.829224] Fixed MDIO Bus: probed
  657. [    0.829230] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  658. [    0.831222] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
  659. [    0.831226]   alloc irq_desc for 22 on node 0
  660. [    0.831227]   alloc kstat_irqs on node 0
  661. [    0.831236] ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
  662. [    0.831248] ehci_hcd 0000:00:02.1: setting latency timer to 64
  663. [    0.831250] ehci_hcd 0000:00:02.1: EHCI Host Controller
  664. [    0.831285] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
  665. [    0.831313] ehci_hcd 0000:00:02.1: debug port 1
  666. [    0.831317] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
  667. [    0.831334] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
  668. [    0.836076] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
  669. [    0.836099] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  670. [    0.836101] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  671. [    0.836103] usb usb1: Product: EHCI Host Controller
  672. [    0.836105] usb usb1: Manufacturer: Linux 2.6.31.5-0.1-desktop ehci_hcd
  673. [    0.836107] usb usb1: SerialNumber: 0000:00:02.1
  674. [    0.836186] usb usb1: configuration #1 chosen from 1 choice
  675. [    0.836212] hub 1-0:1.0: USB hub found
  676. [    0.836218] hub 1-0:1.0: 6 ports detected
  677. [    0.836561] ACPI: PCI Interrupt Link [AU2B] disabled and referenced, BIOS bug
  678. [    0.836723] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 21
  679. [    0.836726]   alloc irq_desc for 21 on node 0
  680. [    0.836728]   alloc kstat_irqs on node 0
  681. [    0.836735] ehci_hcd 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 21 (level, low) -> IRQ 21
  682. [    0.836744] ehci_hcd 0000:00:04.1: setting latency timer to 64
  683. [    0.836746] ehci_hcd 0000:00:04.1: EHCI Host Controller
  684. [    0.836755] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
  685. [    0.836779] ehci_hcd 0000:00:04.1: debug port 1
  686. [    0.836782] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
  687. [    0.836799] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfe02c000
  688. [    0.842060] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
  689. [    0.842072] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  690. [    0.842074] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  691. [    0.842076] usb usb2: Product: EHCI Host Controller
  692. [    0.842078] usb usb2: Manufacturer: Linux 2.6.31.5-0.1-desktop ehci_hcd
  693. [    0.842079] usb usb2: SerialNumber: 0000:00:04.1
  694. [    0.842130] usb usb2: configuration #1 chosen from 1 choice
  695. [    0.842151] hub 2-0:1.0: USB hub found
  696. [    0.842157] hub 2-0:1.0: 6 ports detected
  697. [    0.842217] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  698. [    0.842665] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 20
  699. [    0.842668]   alloc irq_desc for 20 on node 0
  700. [    0.842670]   alloc kstat_irqs on node 0
  701. [    0.842677] ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 20 (level, low) -> IRQ 20
  702. [    0.842686] ohci_hcd 0000:00:02.0: setting latency timer to 64
  703. [    0.842688] ohci_hcd 0000:00:02.0: OHCI Host Controller
  704. [    0.842698] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
  705. [    0.842719] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
  706. [    0.895483] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  707. [    0.895486] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  708. [    0.895487] usb usb3: Product: OHCI Host Controller
  709. [    0.895489] usb usb3: Manufacturer: Linux 2.6.31.5-0.1-desktop ohci_hcd
  710. [    0.895491] usb usb3: SerialNumber: 0000:00:02.0
  711. [    0.895538] usb usb3: configuration #1 chosen from 1 choice
  712. [    0.895561] hub 3-0:1.0: USB hub found
  713. [    0.895567] hub 3-0:1.0: 6 ports detected
  714. [    0.896066] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 23
  715. [    0.896069] ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 23 (level, low) -> IRQ 23
  716. [    0.896078] ohci_hcd 0000:00:04.0: setting latency timer to 64
  717. [    0.896081] ohci_hcd 0000:00:04.0: OHCI Host Controller
  718. [    0.896089] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
  719. [    0.896111] ohci_hcd 0000:00:04.0: irq 23, io mem 0xfe02d000
  720. [    0.949295] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  721. [    0.949297] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  722. [    0.949299] usb usb4: Product: OHCI Host Controller
  723. [    0.949300] usb usb4: Manufacturer: Linux 2.6.31.5-0.1-desktop ohci_hcd
  724. [    0.949302] usb usb4: SerialNumber: 0000:00:04.0
  725. [    0.949351] usb usb4: configuration #1 chosen from 1 choice
  726. [    0.949373] hub 4-0:1.0: USB hub found
  727. [    0.949379] hub 4-0:1.0: 6 ports detected
  728. [    0.949428] uhci_hcd: USB Universal Host Controller Interface driver
  729. [    0.949461] Initializing USB Mass Storage driver...
  730. [    0.949488] usbcore: registered new interface driver usb-storage
  731. [    0.949491] USB Mass Storage support registered.
  732. [    0.949516] usbcore: registered new interface driver libusual
  733. [    0.949525] usbcore: registered new interface driver ums-alauda
  734. [    0.949533] usbcore: registered new interface driver ums-cypress
  735. [    0.949543] usbcore: registered new interface driver ums-datafab
  736. [    0.949552] usbcore: registered new interface driver ums-freecom
  737. [    0.949560] usbcore: registered new interface driver ums-isd200
  738. [    0.949569] usbcore: registered new interface driver ums-jumpshot
  739. [    0.949577] usbcore: registered new interface driver ums-karma
  740. [    0.949586] usbcore: registered new interface driver ums-onetouch
  741. [    0.949595] usbcore: registered new interface driver ums-sddr09
  742. [    0.949603] usbcore: registered new interface driver ums-sddr55
  743. [    0.949612] usbcore: registered new interface driver ums-usbat
  744. [    0.949645] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  745. [    0.952474] serio: i8042 KBD port at 0x60,0x64 irq 1
  746. [    0.952479] serio: i8042 AUX port at 0x60,0x64 irq 12
  747. [    0.952544] mice: PS/2 mouse device common for all mice
  748. [    0.952618] rtc_cmos 00:05: RTC can wake from S4
  749. [    0.952651] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
  750. [    0.952705] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
  751. [    0.952714] cpuidle: using governor ladder
  752. [    0.952716] cpuidle: using governor menu
  753. [    0.952920] usbcore: registered new interface driver hiddev
  754. [    0.952931] usbcore: registered new interface driver usbhid
  755. [    0.952933] usbhid: v2.6:USB HID core driver
  756. [    0.971068] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  757. [    1.028808] TCP cubic registered
  758. [    1.028881] NET: Registered protocol family 10
  759. [    1.029356] lo: Disabled Privacy Extensions
  760. [    1.029696] lib80211: common routines for IEEE802.11 drivers
  761. [    1.029698] lib80211_crypt: registered algorithm 'NULL'
  762. [    1.029782] PM: Checking image partition /dev/disk/by-id/ata-Hitachi_HDT721010SLA360_STF604MH0P8HWB-part1
  763. [    1.136417] ata4: SATA link down (SStatus 0 SControl 300)
  764. [    1.136436] ata2: SATA link down (SStatus 0 SControl 300)
  765. [    1.136445] ata6: SATA link down (SStatus 0 SControl 300)
  766. [    1.289352] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  767. [    1.289363] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  768. [    1.289369] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  769. [    1.290786] ata1.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
  770. [    1.290788] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  771. [    1.291267] ata3.00: ATAPI: PIONEER DVD-RW  DVR-212D, 1.24, max UDMA/66
  772. [    1.291780] ata5.00: ATA-7: Maxtor 6L160M0, BANC1G10, max UDMA/133
  773. [    1.291783] ata5.00: 320173056 sectors, multi 0: LBA48 NCQ (not used)
  774. [    1.292750] ata1.00: configured for UDMA/133
  775. [    1.292847] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
  776. [    1.292863] ata3.00: configured for UDMA/66
  777. [    1.292990] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  778. [    1.293023] sd 0:0:0:0: [sda] Write Protect is off
  779. [    1.293026] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  780. [    1.293042] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  781. [    1.293147]  sda:
  782. [    1.295124] ata5.00: configured for UDMA/133
  783. [    1.299913] scsi 2:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-212D 1.24 PQ: 0 ANSI: 5
  784. [    1.300066] scsi 4:0:0:0: Direct-Access     ATA      Maxtor 6L160M0   BANC PQ: 0 ANSI: 5
  785. [    1.300164] sd 4:0:0:0: [sdb] 320173056 512-byte logical blocks: (163 GB/152 GiB)
  786. [    1.300198] sd 4:0:0:0: [sdb] Write Protect is off
  787. [    1.300201] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  788. [    1.300218] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  789. [    1.300341]  sdb: sda1 sda2
  790. [    1.304761] sd 0:0:0:0: [sda] Attached SCSI disk
  791. [    1.335381]  [mac] sdb1 sdb2 sdb3 sdb4
  792. [    1.335565] sd 4:0:0:0: [sdb] Attached SCSI disk
  793. [    1.335570] PM: Resume from disk failed.
  794. [    1.335582] registered taskstats version 1
  795. [    1.335735]   Magic number: 1:779:472
  796. [    1.335806] acpi LNXSYSTM:00: hash matches
  797. [    1.335874] rtc_cmos 00:05: setting system clock to 2009-11-13 08:29:36 UTC (1258100976)
  798. [    1.335931] Freeing unused kernel memory: 980k freed
  799. [    1.336259] Write protecting the kernel read-only data: 8856k
  800. [    1.349145] usb 3-2: new low speed USB device using ohci_hcd and address 2
  801. [    1.362760] ACPI Warning: \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference 20090521 nspredef-
  802. 946
  803. [    1.362769] ACPI: Expecting a [Reference] package element, found type 0
  804. [    1.362781] ACPI: Invalid passive threshold
  805. [    1.363189] thermal LNXTHERM:01: registered as thermal_zone0
  806. [    1.363197] ACPI: Thermal Zone [THRM] (40 C)
  807. [    1.366114] pata_amd 0000:00:06.0: version 0.4.1
  808. [    1.366155] pata_amd 0000:00:06.0: setting latency timer to 64
  809. [    1.366231] scsi6 : pata_amd
  810. [    1.366308] scsi7 : pata_amd
  811. [    1.367197] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
  812. [    1.367200] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
  813. [    1.520680] ata7.00: ATAPI: HL-DT-STDVD-RAM GSA-H22N, 1.01, max UDMA/66
  814. [    1.520703] ata7: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
  815. [    1.526554] ata7.00: configured for UDMA/66
  816. [    1.541446] scsi 6:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H22N 1.01 PQ: 0 ANSI: 5
  817. [    1.541582] ata8: port disabled. ignoring.
  818. [    1.545305] sata_sil24 0000:04:00.0: version 1.1
  819. [    1.545322] sata_sil24 0000:04:00.0: PCI INT A -> Link[AE2A] -> GSI 16 (level, low) -> IRQ 16
  820. [    1.545408] sata_sil24 0000:04:00.0: setting latency timer to 64
  821. [    1.545562] scsi8 : sata_sil24
  822. [    1.545624] scsi9 : sata_sil24
  823. [    1.545652] ata9: SATA max UDMA/100 host m128@0xfdaff000 port 0xfdaf8000 irq 16
  824. [    1.545656] ata10: SATA max UDMA/100 host m128@0xfdaff000 port 0xfdafa000 irq 16
  825. [    1.616715] usb 3-2: New USB device found, idVendor=051d, idProduct=0002
  826. [    1.616717] usb 3-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
  827. [    1.616720] usb 3-2: Product: Back-UPS XS 1200 FW:8.g1 .D USB FW:g1
  828. [    1.616722] usb 3-2: Manufacturer: American Power Conversion
  829. [    1.616723] usb 3-2: SerialNumber: JB0531007416  
  830. [    1.616780] usb 3-2: configuration #1 chosen from 1 choice
  831. [    2.163525] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1200 FW:8.g1 .D USB FW:g1 ] on u
  832. sb-0000:00:02.0-2/input0
  833. [    2.354085] CE: hpet increasing min_delta_ns to 15000 nsec
  834. [    2.486282] usb 4-2: new low speed USB device using ohci_hcd and address 2
  835. [    3.565213] ata9: SATA link down (SStatus 0 SControl 0)
  836. [    5.585424] ata10: SATA link down (SStatus 0 SControl 0)
  837. [    5.598626] Uniform Multi-Platform E-IDE driver
  838. [    5.605774] processor LNXCPU:00: registered as cooling_device0
  839. [    5.605806] processor LNXCPU:01: registered as cooling_device1
  840. [    5.605835] processor LNXCPU:02: registered as cooling_device2
  841. [    5.605866] processor LNXCPU:03: registered as cooling_device3
  842. [    5.607843] fan PNP0C0B:00: registered as cooling_device4
  843. [    5.607850] ACPI: Fan [FAN] (on)
  844. [    5.612263] udev: starting version 146
  845. [    5.800495] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
  846. [    5.800501] PM: Marking nosave pages: 00000000b7fe0000 - 0000000100000000
  847. [    5.801333] PM: Marking nosave pages: 0000000020000000 - 0000000024000000
  848. [    5.801608] PM: Basic memory bitmaps created
  849. [    5.838423] PM: Basic memory bitmaps freed
  850. [    5.845653] PM: Starting manual resume from disk
  851. [    5.845657] PM: Resume from partition 8:1
  852. [    5.845658] PM: Checking hibernation image.
  853. [    5.846189] PM: Resume from disk failed.
  854. [    5.954767] EXT4-fs (sda2): barriers enabled
  855. [    5.958152] kjournald2 starting: pid 383, dev sda2:8, commit interval 5 seconds
  856. [    5.958666] EXT4-fs (sda2): internal journal on sda2:8
  857. [    5.958669] EXT4-fs (sda2): delayed allocation enabled
  858. [    5.958672] EXT4-fs: file extents enabled
  859. [    6.055728] EXT4-fs: mballoc enabled
  860. [    6.055745] EXT4-fs (sda2): mounted filesystem with ordered data mode
  861. [    7.351775] preloadtrace: systemtap: 0.9.9/0.142, base: ffffffffa0106000, memory: 49196+82372+44512+14000 data+text+ctx+net, probes: 44
  862. [    8.755922] udev: starting version 146
  863. [    8.774897] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  864. [    8.774950] ACPI: Power Button [PWRF]
  865. [    8.775003] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
  866. [    8.775025] ACPI: Power Button [PWRB]
  867. [    8.793069] Floppy drive(s): fd0 is 1.44M
  868. [    8.798740] ACPI: WMI: Mapper loaded
  869. [    8.806947] sd 0:0:0:0: Attached scsi generic sg0 type 0
  870. [    8.806975] scsi 2:0:0:0: Attached scsi generic sg1 type 5
  871. [    8.807009] sd 4:0:0:0: Attached scsi generic sg2 type 0
  872. [    8.807035] scsi 6:0:0:0: Attached scsi generic sg3 type 5
  873. [    8.807242] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
  874. [    8.807247] ACPI: I/O resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM01 [0x1c40-0x1c7f]
  875. [    8.807459] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  876. [    8.807461] nForce2_smbus 0000:00:01.1: Error probing SMB2.
  877. [    8.812993] FDC 0 is a post-1991 82077
  878. [    8.829449] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
  879. [    8.829455] Uniform CD-ROM driver Revision: 3.20
  880. [    8.829571] sr 2:0:0:0: Attached scsi CD-ROM sr0
  881. [    8.833859] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  882. [    8.833962] sr 6:0:0:0: Attached scsi CD-ROM sr1
  883. [    8.844620] EDAC MC: Ver: 2.1.0 Oct 27 2009
  884. [    8.847558] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
  885. [    8.847565]   alloc irq_desc for 17 on node 0
  886. [    8.847567]   alloc kstat_irqs on node 0
  887. [    8.847579] ohci1394 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
  888. [    8.847585] ohci1394 0000:01:07.0: setting latency timer to 64
  889. [    8.848470] EDAC amd64_edac:  Ver: 3.2.0 Oct 27 2009
  890. [    8.850765] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  891. [    8.851134] EDAC amd64: This node reports that Memory ECC is currently disabled.
  892. [    8.851136] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled
  893. [    8.851139] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
  894. [    8.851140]     Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter.
  895. [    8.851142]     Might be a BIOS bug, if BIOS says ECC is enabled
  896. [    8.851143]     Use of the override can cause unknown side effects.
  897. [    8.851164] input: PC Speaker as /devices/platform/pcspkr/input/input3
  898. [    8.851275] amd64_edac: probe of 0000:00:18.2 failed with error -22
  899. [    8.853815] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  900. [    8.853848] r8169 0000:05:00.0: PCI INT A -> Link[AE3A] -> GSI 16 (level, low) -> IRQ 16
  901. [    8.853895] r8169 0000:05:00.0: setting latency timer to 64
  902. [    8.853927]   alloc irq_desc for 29 on node 0
  903. [    8.853929]   alloc kstat_irqs on node 0
  904. [    8.853941] r8169 0000:05:00.0: irq 29 for MSI/MSI-X
  905. [    8.854642] eth0: RTL8168c/8111c at 0xffffc90000c7a000, 00:1f:bc:03:bb:21, XID 3c4000c0 IRQ 29
  906. [    8.859123] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  907. [    8.889377] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
  908. [    8.889383] HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
  909. [    8.889431] HDA Intel 0000:00:07.0: setting latency timer to 64
  910. [    8.899053] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[fdeff000-fdeff7ff]  Max Packet=[4096]  IR/IT contexts=[4/8]
  911. [    9.235094] hda_codec: ALC1200: BIOS auto-probing.
  912. [    9.235101] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3881: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17
  913. /0x0)
  914. [    9.235105] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3885:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  915. [    9.235109] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3889:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
  916. [    9.235113] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3890:    mono: mono_out=0x0
  917. [    9.235116] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3893:    dig-out=0x1e/0x0
  918. [    9.235119] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3901:    inputs: mic=0x18, fmic=0x19, line=0x1a, f
  919. line=0x0, cd=0x0, aux=0x0
  920. [    9.235122] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/hda_codec.c:3903:    dig-in=0x1f
  921. [    9.329193] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/patch_realtek.c:1282: realtek: No valid SSID, checking pincfg
  922. 0x4005e601 for NID 0x1d
  923. [    9.329197] ALSA /usr/src/packages/BUILD/kernel-desktop-2.6.31.5/linux-2.6.31/sound/pci/hda/patch_realtek.c:1298: realtek: Enabling init ASM_ID=0xe601 COD
  924. EC_ID=10ec0888
  925. [    9.329263] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input4
  926. [    9.706546] Adding 2104472k swap on /dev/sda1.  Priority:-1 extents:1 across:2104472k
  927. [    9.808365] CE: hpet increasing min_delta_ns to 22500 nsec
  928. [    9.902188] CE: hpet increasing min_delta_ns to 33750 nsec
  929. [   10.155572] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00d0f50500000000]
  930. [   10.264388] device-mapper: uevent: version 1.0.3
  931. [   10.264861] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  932. [   10.430481] loop: module loaded
  933. [   10.809010] fuse init (API version 7.12)
  934. [   11.569299] type=1505 audit(1258118986.732:2): operation="profile_load" pid=1282 name=/bin/ping
  935. [   11.593453] type=1505 audit(1258118986.757:3): operation="profile_load" pid=1283 name=/sbin/klogd
  936. [   11.641581] type=1505 audit(1258118986.805:4): operation="profile_load" pid=1284 name=/sbin/syslog-ng
  937. [   11.688734] type=1505 audit(1258118986.852:5): operation="profile_load" pid=1285 name=/sbin/syslogd
  938. [   11.737153] type=1505 audit(1258118986.900:6): operation="profile_load" pid=1286 name=/usr/sbin/avahi-daemon
  939. [   11.779208] type=1505 audit(1258118986.942:7): operation="profile_load" pid=1287 name=/usr/sbin/identd
  940. [   11.822973] type=1505 audit(1258118986.986:8): operation="profile_load" pid=1288 name=/usr/sbin/mdnsd
  941. [   11.872531] type=1505 audit(1258118987.036:9): operation="profile_load" pid=1289 name=/usr/sbin/nscd
  942. [   11.940281] type=1505 audit(1258118987.103:10): operation="profile_load" pid=1290 name=/usr/sbin/ntpd
  943. [   11.982381] type=1505 audit(1258118987.145:11): operation="profile_load" pid=1291 name=/usr/sbin/traceroute
  944. [   13.480917] powernow-k8: Found 1 AMD Phenom(tm) 9950 Quad-Core Processor processors (4 cpu cores) (version 2.20.00)
  945. [   13.480969] powernow-k8:    0 : pstate 0 (2600 MHz)
  946. [   13.480972] powernow-k8:    1 : pstate 1 (1300 MHz)
  947. [   14.349694] r8169: eth0: link up
  948. [   14.349707] r8169: eth0: link up
  949. [   16.734647] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
  950. [   25.006149] eth0: no IPv6 routers present
  951. [  240.728332] INFO: task ksuspend_usbd:38 blocked for more than 120 seconds.
  952. [  240.728344] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  953. [  240.728353] ksuspend_usbd D 0000000000000000     0    38      2 0x00000000
  954. [  240.728366]  ffff88023e82fca0 0000000000000046 0000000000000000 0000000000013a00
  955. [  240.728378]  0000000000013a00 ffff88023e82c4f8 0000000000013a00 0000000000013a00
  956. [  240.728390]  0000000000013a00 0000000000013a00 ffff88023e82c4f8 0000000000013a00
  957. [  240.728403] Call Trace:
  958. [  240.728425]  [<ffffffff815534d5>] schedule_timeout+0x1c5/0x220
  959. [  240.728440]  [<ffffffff815547fd>] __down+0x7d/0xd0
  960. [  240.728456]  [<ffffffff8109287a>] down+0x5a/0x70
  961. [  240.728468]  [<ffffffff813ac4c6>] hcd_resume_work+0x36/0x80
  962. [  240.728479]  [<ffffffff810858ca>] run_workqueue+0x9a/0x1e0
  963. [  240.728491]  [<ffffffff8108781f>] worker_thread+0xaf/0x140
  964. [  240.728502]  [<ffffffff8108c336>] kthread+0xb6/0xc0
  965. [  240.728513]  [<ffffffff8100d7ba>] child_rip+0xa/0x20
  966. [  240.728524] INFO: task khubd:39 blocked for more than 120 seconds.
  967. [  240.728531] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  968. [  240.728539] khubd         D ffff88023e833b80     0    39      2 0x00000000
  969. [  240.728549]  ffff88023e833af0 0000000000000046 ffff88023e833a70 0000000000013a00
  970. [  240.728561]  0000000000013a00 ffff88023e830538 0000000000013a00 0000000000013a00
  971. [  240.728572]  0000000000013a00 0000000000013a00 ffff88023e830538 0000000000013a00
  972. [  240.728586] Call Trace:
  973. [  240.728598]  [<ffffffff813aee65>] usb_kill_urb+0xa5/0xe0
  974. [  240.728610]  [<ffffffff813b0f00>] usb_start_wait_urb+0x100/0x1e0
  975. [  240.728622]  [<ffffffff813b12a1>] usb_control_msg+0x101/0x1d0
  976. [  240.728634]  [<ffffffff813a8076>] hub_port_init+0x516/0xa10
  977. [  240.728645]  [<ffffffff813aa0ef>] hub_port_connect_change+0x1ff/0xa70
  978. [  240.728656]  [<ffffffff813aacea>] hub_events+0x38a/0x8e0
  979. [  240.728667]  [<ffffffff813ab28a>] hub_thread+0x4a/0x1f0
  980. [  240.728677]  [<ffffffff8108c336>] kthread+0xb6/0xc0
  981. [  240.728691]  [<ffffffff8100d7ba>] child_rip+0xa/0x20
  982. [  360.728434] INFO: task ksuspend_usbd:38 blocked for more than 120 seconds.
  983. [  360.728450] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  984. [  360.728466] ksuspend_usbd D 0000000000000000     0    38      2 0x00000000
  985. [  360.728483]  ffff88023e82fca0 0000000000000046 0000000000000000 0000000000013a00
  986. [  360.728497]  0000000000013a00 ffff88023e82c4f8 0000000000013a00 0000000000013a00
  987. [  360.728509]  0000000000013a00 0000000000013a00 ffff88023e82c4f8 0000000000013a00
  988. [  360.728526] Call Trace:
  989. [  360.728550]  [<ffffffff815534d5>] schedule_timeout+0x1c5/0x220
  990. [  360.728568]  [<ffffffff815547fd>] __down+0x7d/0xd0
  991. [  360.728588]  [<ffffffff8109287a>] down+0x5a/0x70
  992. [  360.728605]  [<ffffffff813ac4c6>] hcd_resume_work+0x36/0x80
  993. [  360.728621]  [<ffffffff810858ca>] run_workqueue+0x9a/0x1e0
  994. [  360.728639]  [<ffffffff8108781f>] worker_thread+0xaf/0x140
  995. [  360.728656]  [<ffffffff8108c336>] kthread+0xb6/0xc0
  996. [  360.728674]  [<ffffffff8100d7ba>] child_rip+0xa/0x20
  997. [  360.728689] INFO: task khubd:39 blocked for more than 120 seconds.
  998. [  360.728697] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  999. [  360.728713] khubd         D ffff88023e833b80     0    39      2 0x00000000
  1000. [  360.728731]  ffff88023e833af0 0000000000000046 ffff88023e833a70 0000000000013a00
  1001. [  360.728747]  0000000000013a00 ffff88023e830538 0000000000013a00 0000000000013a00
  1002. [  360.728770]  0000000000013a00 0000000000013a00 ffff88023e830538 0000000000013a00
  1003. [  360.728786] Call Trace:
  1004. [  360.728802]  [<ffffffff813aee65>] usb_kill_urb+0xa5/0xe0
  1005. [  360.728821]  [<ffffffff813b0f00>] usb_start_wait_urb+0x100/0x1e0
  1006. [  360.728840]  [<ffffffff813b12a1>] usb_control_msg+0x101/0x1d0
  1007. [  360.728860]  [<ffffffff813a8076>] hub_port_init+0x516/0xa10
  1008. [  360.728876]  [<ffffffff813aa0ef>] hub_port_connect_change+0x1ff/0xa70
  1009. [  360.728893]  [<ffffffff813aacea>] hub_events+0x38a/0x8e0
  1010. [  360.728905]  [<ffffffff813ab28a>] hub_thread+0x4a/0x1f0
  1011. [  360.728923]  [<ffffffff8108c336>] kthread+0xb6/0xc0
  1012. [  360.728939]  [<ffffffff8100d7ba>] child_rip+0xa/0x20
  1013. [  480.728560] INFO: task ksuspend_usbd:38 blocked for more than 120 seconds.
  1014. [  480.728576] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  1015. [  480.728587] ksuspend_usbd D 0000000000000000     0    38      2 0x00000000
  1016. [  480.728602]  ffff88023e82fca0 0000000000000046 0000000000000000 0000000000013a00
  1017. [  480.728616]  0000000000013a00 ffff88023e82c4f8 0000000000013a00 0000000000013a00
  1018. [  480.728628]  0000000000013a00 0000000000013a00 ffff88023e82c4f8 0000000000013a00
  1019. [  480.728643] Call Trace:
  1020. [  480.728667]  [<ffffffff815534d5>] schedule_timeout+0x1c5/0x220
  1021. [  480.728685]  [<ffffffff815547fd>] __down+0x7d/0xd0
  1022. [  480.728702]  [<ffffffff8109287a>] down+0x5a/0x70
  1023. [  480.728720]  [<ffffffff813ac4c6>] hcd_resume_work+0x36/0x80
  1024. [  480.728735]  [<ffffffff810858ca>] run_workqueue+0x9a/0x1e0
  1025. [  480.728754]  [<ffffffff8108781f>] worker_thread+0xaf/0x140
  1026. [  480.728772]  [<ffffffff8108c336>] kthread+0xb6/0xc0
  1027. [  480.728786]  [<ffffffff8100d7ba>] child_rip+0xa/0x20
  1028. [  480.728801] INFO: task khubd:39 blocked for more than 120 seconds.
  1029. [  480.728810] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  1030. [  480.728819] khubd         D ffff88023e833b80     0    39      2 0x00000000
  1031. [  480.728836]  ffff88023e833af0 0000000000000046 ffff88023e833a70 0000000000013a00
  1032. [  480.728849]  0000000000013a00 ffff88023e830538 0000000000013a00 0000000000013a00
  1033. [  480.728866]  0000000000013a00 0000000000013a00 ffff88023e830538 0000000000013a00
  1034. [  480.728883] Call Trace:
  1035. [  480.728896]  [<ffffffff813aee65>] usb_kill_urb+0xa5/0xe0
  1036. [  480.728913]  [<ffffffff813b0f00>] usb_start_wait_urb+0x100/0x1e0
  1037. [  480.728930]  [<ffffffff813b12a1>] usb_control_msg+0x101/0x1d0
  1038. [  480.728947]  [<ffffffff813a8076>] hub_port_init+0x516/0xa10
  1039. [  480.728964]  [<ffffffff813aa0ef>] hub_port_connect_change+0x1ff/0xa70
  1040. [  480.728980]  [<ffffffff813aacea>] hub_events+0x38a/0x8e0
  1041. [  480.728996]  [<ffffffff813ab28a>] hub_thread+0x4a/0x1f0
  1042. [  480.729008]  [<ffffffff8108c336>] kthread+0xb6/0xc0
  1043. [  480.729020]  [<ffffffff8100d7ba>] child_rip+0xa/0x20
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top