Guest User

greebothecat

a guest
Jun 6th, 2008
173
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. dmesg
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Linux version 2.6.24-18-generic (buildd@king) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed May 28 19:28:38 UTC 2008 (Ubuntu 2.6.24-18.32-generic)
  5. [ 0.000000] Command line: root=UUID=0398932b-406b-4400-8c5e-a8089107da03 ro quiet splash
  6. [ 0.000000] BIOS-provided physical RAM map:
  7. [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  8. [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  9. [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
  10. [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)
  11. [ 0.000000] BIOS-e820: 000000007ffc0000 - 000000007ffce000 (ACPI data)
  12. [ 0.000000] BIOS-e820: 000000007ffce000 - 000000007fff0000 (ACPI NVS)
  13. [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
  14. [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  15. [ 0.000000] BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
  16. [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
  17. [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
  18. [ 0.000000] Entering add_active_range(0, 256, 524224) 1 entries of 3200 used
  19. [ 0.000000] end_pfn_map = 1048576
  20. [ 0.000000] DMI 2.3 present.
  21. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FA7C0 checksum 0
  22. [ 0.000000] ACPI: RSDP 000FA7C0, 0014 (r0 ACPIAM)
  23. [ 0.000000] ACPI: RSDT 7FFC0000, 0034 (r1 A M I OEMRSDT 9000626 MSFT 97)
  24. [ 0.000000] ACPI: FACP 7FFC0200, 0084 (r2 A M I OEMFACP 9000626 MSFT 97)
  25. [ 0.000000] ACPI: DSDT 7FFC0440, 5486 (r1 A0611 A0611000 0 INTL 2002026)
  26. [ 0.000000] ACPI: FACS 7FFCE000, 0040
  27. [ 0.000000] ACPI: APIC 7FFC0390, 0068 (r1 A M I OEMAPIC 9000626 MSFT 97)
  28. [ 0.000000] ACPI: MCFG 7FFC0400, 003C (r1 A M I OEMMCFG 9000626 MSFT 97)
  29. [ 0.000000] ACPI: OEMB 7FFCE040, 0046 (r1 A M I AMI_OEM 9000626 MSFT 97)
  30. [ 0.000000] Scanning NUMA topology in Northbridge 24
  31. [ 0.000000] CPU has 1 num_cores
  32. [ 0.000000] No NUMA configuration found
  33. [ 0.000000] Faking a node at 0000000000000000-000000007ffc0000
  34. [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
  35. [ 0.000000] Entering add_active_range(0, 256, 524224) 1 entries of 3200 used
  36. [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ffc0000
  37. [ 0.000000] Zone PFN ranges:
  38. [ 0.000000] DMA 0 -> 4096
  39. [ 0.000000] DMA32 4096 -> 1048576
  40. [ 0.000000] Normal 1048576 -> 1048576
  41. [ 0.000000] Movable zone start PFN for each node
  42. [ 0.000000] early_node_map[2] active PFN ranges
  43. [ 0.000000] 0: 0 -> 159
  44. [ 0.000000] 0: 256 -> 524224
  45. [ 0.000000] On node 0 totalpages: 524127
  46. [ 0.000000] DMA zone: 56 pages used for memmap
  47. [ 0.000000] DMA zone: 1220 pages reserved
  48. [ 0.000000] DMA zone: 2723 pages, LIFO batch:0
  49. [ 0.000000] DMA32 zone: 7111 pages used for memmap
  50. [ 0.000000] DMA32 zone: 513017 pages, LIFO batch:31
  51. [ 0.000000] Normal zone: 0 pages used for memmap
  52. [ 0.000000] Movable zone: 0 pages used for memmap
  53. [ 0.000000] ACPI: PM-Timer IO Port: 0x808
  54. [ 0.000000] ACPI: Local APIC address 0xfee00000
  55. [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  56. [ 0.000000] Processor #0 (Bootup-CPU)
  57. [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
  58. [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
  59. [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
  60. [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
  61. [ 0.000000] IOAPIC[1]: apic_id 2, address 0xfecc0000, GSI 24-47
  62. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  63. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
  64. [ 0.000000] ACPI: IRQ0 used by override.
  65. [ 0.000000] ACPI: IRQ2 used by override.
  66. [ 0.000000] ACPI: IRQ9 used by override.
  67. [ 0.000000] Setting APIC routing to flat
  68. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  69. [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
  70. [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
  71. [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
  72. [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
  73. [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
  74. [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data
  75. [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515740
  76. [ 0.000000] Policy zone: DMA32
  77. [ 0.000000] Kernel command line: root=UUID=0398932b-406b-4400-8c5e-a8089107da03 ro quiet splash
  78. [ 0.000000] Initializing CPU#0
  79. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
  80. [ 0.000000] TSC calibrated against PM_TIMER
  81. [ 15.839468] time.c: Detected 2200.002 MHz processor.
  82. [ 15.840646] Console: colour VGA+ 80x25
  83. [ 15.840649] console [tty0] enabled
  84. [ 15.840663] Checking aperture...
  85. [ 15.840665] CPU 0: aperture @ d0000000 size 128 MB
  86. [ 15.855689] Memory: 2055244k/2096896k available (2488k kernel code, 41264k reserved, 1319k data, 320k init)
  87. [ 15.855721] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
  88. [ 15.933373] Calibrating delay using timer specific routine.. 4405.15 BogoMIPS (lpj=8810308)
  89. [ 15.933402] Security Framework initialized
  90. [ 15.933407] SELinux: Disabled at boot.
  91. [ 15.933420] AppArmor: AppArmor initialized
  92. [ 15.933423] Failure registering capabilities with primary security module.
  93. [ 15.933571] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  94. [ 15.934568] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  95. [ 15.935046] Mount-cache hash table entries: 256
  96. [ 15.935162] Initializing cgroup subsys ns
  97. [ 15.935165] Initializing cgroup subsys cpuacct
  98. [ 15.935177] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  99. [ 15.935179] CPU: L2 Cache: 512K (64 bytes/line)
  100. [ 15.935181] CPU 0/0 -> Node 0
  101. [ 15.935204] SMP alternatives: switching to UP code
  102. [ 15.935755] Early unpacking initramfs... done
  103. [ 16.214060] ACPI: Core revision 20070126
  104. [ 16.214108] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
  105. [ 16.257410] Using local APIC timer interrupts.
  106. [ 16.302824] APIC timer calibration result 12500012
  107. [ 16.302826] Detected 12.500 MHz APIC timer.
  108. [ 16.302874] Brought up 1 CPUs
  109. [ 16.303096] CPU0 attaching sched-domain:
  110. [ 16.303099] domain 0: span 01
  111. [ 16.303100] groups: 01
  112. [ 16.303231] net_namespace: 120 bytes
  113. [ 16.303601] Time: 10:16:54 Date: 06/06/08
  114. [ 16.303627] NET: Registered protocol family 16
  115. [ 16.303779] ACPI: bus type pci registered
  116. [ 16.303836] PCI: Using configuration type 1
  117. [ 16.306343] ACPI: EC: Look up EC in DSDT
  118. [ 16.310956] ACPI: Interpreter enabled
  119. [ 16.310959] ACPI: (supports S0 S1 S3 S4 S5)
  120. [ 16.310972] ACPI: Using IOAPIC for interrupt routing
  121. [ 16.319114] ACPI: PCI Root Bridge [PCI0] (0000:00)
  122. [ 16.319946] PCI: enabled onboard AC97/MC97 devices
  123. [ 16.320367] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  124. [ 16.320540] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  125. [ 16.320613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
  126. [ 16.320697] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
  127. [ 16.336184] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  128. [ 16.336293] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  129. [ 16.336398] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  130. [ 16.336504] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  131. [ 16.336610] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  132. [ 16.336715] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  133. [ 16.336821] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  134. [ 16.336926] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  135. [ 16.337033] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 19, should be 0A [20070126]
  136. [ 16.337039] Linux Plug and Play Support v0.97 (c) Adam Belay
  137. [ 16.337064] pnp: PnP ACPI init
  138. [ 16.337070] ACPI: bus type pnp registered
  139. [ 16.341007] pnp: PnP ACPI: found 15 devices
  140. [ 16.341009] ACPI: ACPI bus type pnp unregistered
  141. [ 16.341200] PCI: Using ACPI for IRQ routing
  142. [ 16.341202] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
  143. [ 16.341209] PCI: Cannot allocate resource region 9 of bridge 0000:00:02.0
  144. [ 16.341249] PCI: Cannot allocate resource region 0 of device 0000:02:00.0
  145. [ 16.346854] NET: Registered protocol family 8
  146. [ 16.346855] NET: Registered protocol family 20
  147. [ 16.346912] agpgart: Detected AGP bridge 0
  148. [ 16.350733] agpgart: AGP aperture is 128M @ 0xd0000000
  149. [ 16.350798] Time: tsc clocksource has been installed.
  150. [ 16.350807] AppArmor: AppArmor Filesystem Enabled
  151. [ 16.366814] system 00:07: ioport range 0xc00-0xc0f has been reserved
  152. [ 16.366817] system 00:07: ioport range 0xd00-0xd0f has been reserved
  153. [ 16.366819] system 00:07: ioport range 0xa20-0xa2f has been reserved
  154. [ 16.366822] system 00:07: ioport range 0xa30-0xa3f has been reserved
  155. [ 16.366831] system 00:09: ioport range 0x3e0-0x3e7 has been reserved
  156. [ 16.366833] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
  157. [ 16.366836] system 00:09: ioport range 0x800-0x87f has been reserved
  158. [ 16.366838] system 00:09: ioport range 0x400-0x41f has been reserved
  159. [ 16.366843] system 00:09: iomem range 0xff300000-0xff3fffff has been reserved
  160. [ 16.366849] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
  161. [ 16.366852] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
  162. [ 16.366858] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
  163. [ 16.366866] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
  164. [ 16.366869] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
  165. [ 16.366871] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
  166. [ 16.366874] system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
  167. [ 16.366877] system 00:0e: iomem range 0xff780000-0xffffffff could not be reserved
  168. [ 16.367193] PCI: Bridge: 0000:00:01.0
  169. [ 16.367194] IO window: disabled.
  170. [ 16.367197] MEM window: disabled.
  171. [ 16.367200] PREFETCH window: disabled.
  172. [ 16.367207] PCI: Bridge: 0000:00:02.0
  173. [ 16.367209] IO window: a000-afff
  174. [ 16.367212] MEM window: ff500000-ff5fffff
  175. [ 16.367215] PREFETCH window: 90000000-9fffffff
  176. [ 16.367218] PCI: Bridge: 0000:00:03.0
  177. [ 16.367219] IO window: disabled.
  178. [ 16.367223] MEM window: disabled.
  179. [ 16.367226] PREFETCH window: disabled.
  180. [ 16.367244] PCI: Setting latency timer of device 0000:00:01.0 to 64
  181. [ 16.367259] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
  182. [ 16.367263] PCI: Setting latency timer of device 0000:00:02.0 to 64
  183. [ 16.367275] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
  184. [ 16.367279] PCI: Setting latency timer of device 0000:00:03.0 to 64
  185. [ 16.367318] NET: Registered protocol family 2
  186. [ 16.402835] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
  187. [ 16.403470] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
  188. [ 16.405290] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  189. [ 16.405761] TCP: Hash tables configured (established 262144 bind 65536)
  190. [ 16.405764] TCP reno registered
  191. [ 16.414862] checking if image is initramfs... it is
  192. [ 16.870299] Switched to high resolution mode on CPU 0
  193. [ 16.952863] Freeing initrd memory: 7505k freed
  194. [ 16.956867] audit: initializing netlink socket (disabled)
  195. [ 16.956879] audit(1212747415.076:1): initialized
  196. [ 16.958513] VFS: Disk quotas dquot_6.5.1
  197. [ 16.958578] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  198. [ 16.958690] io scheduler noop registered
  199. [ 16.958691] io scheduler anticipatory registered
  200. [ 16.958693] io scheduler deadline registered
  201. [ 16.958774] io scheduler cfq registered (default)
  202. [ 16.958787] PCI: VIA PCI bridge detected. Disabling DAC.
  203. [ 16.959035] Boot video device is 0000:02:00.0
  204. [ 16.959195] PCI: Setting latency timer of device 0000:00:02.0 to 64
  205. [ 16.959226] assign_interrupt_mode Found MSI capability
  206. [ 16.959263] Allocate Port Service[0000:00:02.0:pcie00]
  207. [ 16.959293] Allocate Port Service[0000:00:02.0:pcie02]
  208. [ 16.959356] PCI: Setting latency timer of device 0000:00:03.0 to 64
  209. [ 16.959393] assign_interrupt_mode Found MSI capability
  210. [ 16.959434] Allocate Port Service[0000:00:03.0:pcie00]
  211. [ 16.959457] Allocate Port Service[0000:00:03.0:pcie02]
  212. [ 16.981705] Real Time Clock Driver v1.12ac
  213. [ 16.981788] Linux agpgart interface v0.102
  214. [ 16.981790] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
  215. [ 16.981899] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  216. [ 16.982003] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  217. [ 16.982823] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  218. [ 16.983055] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  219. [ 16.983623] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
  220. [ 16.983680] input: Macintosh mouse button emulation as /devices/virtual/input/input0
  221. [ 16.983788] PNP: No PS/2 controller found. Probing ports directly.
  222. [ 16.984080] serio: i8042 KBD port at 0x60,0x64 irq 1
  223. [ 16.984084] serio: i8042 AUX port at 0x60,0x64 irq 12
  224. [ 16.994218] mice: PS/2 mouse device common for all mice
  225. [ 16.994247] cpuidle: using governor ladder
  226. [ 16.994249] cpuidle: using governor menu
  227. [ 16.994371] NET: Registered protocol family 1
  228. [ 16.994451] registered taskstats version 1
  229. [ 16.994570] Magic number: 12:228:274
  230. [ 16.994593] hash matches device ttyy2
  231. [ 16.994672] hash matches device tty11
  232. [ 16.994701] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  233. [ 16.994704] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  234. [ 16.994706] EDD information not available.
  235. [ 16.994713] Freeing unused kernel memory: 320k freed
  236. [ 18.162273] fuse init (API version 7.9)
  237. [ 18.179652] ACPI: CPU0 (power states: C1[C1] C2[C2])
  238. [ 18.179657] ACPI: Processor [CPU1] (supports 16 throttling states)
  239. [ 18.179668] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
  240. [ 18.672479] 8139too Fast Ethernet driver 0.9.28
  241. [ 18.672541] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 17
  242. [ 18.673030] eth0: RealTek RTL8139 at 0xe800, 00:e0:4c:04:20:6e, IRQ 17
  243. [ 18.673032] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
  244. [ 18.673050] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 20 (level, low) -> IRQ 20
  245. [ 18.673516] eth1: RealTek RTL8139 at 0xe400, 00:18:f3:f6:18:41, IRQ 20
  246. [ 18.673517] eth1: Identified 8139 chip type 'RTL-8100B/8139D'
  247. [ 18.684441] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
  248. [ 18.712578] SCSI subsystem initialized
  249. [ 18.768314] libata version 3.00 loaded.
  250. [ 18.780356] usbcore: registered new interface driver usbfs
  251. [ 18.780376] usbcore: registered new interface driver hub
  252. [ 18.784368] sata_via 0000:00:0f.0: version 2.3
  253. [ 18.784391] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
  254. [ 18.784426] sata_via 0000:00:0f.0: routed to hard irq line 11
  255. [ 18.792319] usbcore: registered new device driver usb
  256. [ 18.798282] scsi0 : sata_via
  257. [ 18.812425] scsi1 : sata_via
  258. [ 18.813550] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe000 bmdma 0xd400 irq 20
  259. [ 18.813553] ata2: SATA max UDMA/133 cmd 0xdc00 ctl 0xd800 bmdma 0xd408 irq 20
  260. [ 18.824292] USB Universal Host Controller Interface driver v3.0
  261. [ 18.904264] Floppy drive(s): fd0 is 1.44M
  262. [ 18.924015] FDC 0 is a post-1991 82077
  263. [ 19.016062] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
  264. [ 19.227845] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
  265. [ 19.238993] ACPI: Unable to derive IRQ for device 0000:00:0f.1
  266. [ 19.239036] ACPI: Unable to derive IRQ for device 0000:00:0f.1
  267. [ 19.240380] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
  268. [ 19.240391] uhci_hcd 0000:00:10.0: UHCI Host Controller
  269. [ 19.240624] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
  270. [ 19.240653] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000cc00
  271. [ 19.240775] usb usb1: configuration #1 chosen from 1 choice
  272. [ 19.240793] hub 1-0:1.0: USB hub found
  273. [ 19.240797] hub 1-0:1.0: 2 ports detected
  274. [ 19.343824] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
  275. [ 19.343836] uhci_hcd 0000:00:10.1: UHCI Host Controller
  276. [ 19.343855] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
  277. [ 19.343876] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c800
  278. [ 19.343963] usb usb2: configuration #1 chosen from 1 choice
  279. [ 19.343984] hub 2-0:1.0: USB hub found
  280. [ 19.343988] hub 2-0:1.0: 2 ports detected
  281. [ 19.439644] Marking TSC unstable due to TSC halts in idle
  282. [ 19.443602] Time: acpi_pm clocksource has been installed.
  283. [ 19.447875] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
  284. [ 19.447885] uhci_hcd 0000:00:10.2: UHCI Host Controller
  285. [ 19.447905] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
  286. [ 19.447925] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c400
  287. [ 19.448013] usb usb3: configuration #1 chosen from 1 choice
  288. [ 19.448031] hub 3-0:1.0: USB hub found
  289. [ 19.448035] hub 3-0:1.0: 2 ports detected
  290. [ 19.552511] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
  291. [ 19.552522] uhci_hcd 0000:00:10.3: UHCI Host Controller
  292. [ 19.552541] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
  293. [ 19.552562] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c000
  294. [ 19.552647] usb usb4: configuration #1 chosen from 1 choice
  295. [ 19.552666] hub 4-0:1.0: USB hub found
  296. [ 19.552670] hub 4-0:1.0: 2 ports detected
  297. [ 19.584714] usb 1-1: new low speed USB device using uhci_hcd and address 2
  298. [ 19.657924] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
  299. [ 19.658011] ehci_hcd 0000:00:10.4: EHCI Host Controller
  300. [ 19.658071] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
  301. [ 19.658106] ehci_hcd 0000:00:10.4: irq 21, io mem 0xff6ff400
  302. [ 19.722127] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  303. [ 19.722222] usb usb5: configuration #1 chosen from 1 choice
  304. [ 19.722241] hub 5-0:1.0: USB hub found
  305. [ 19.722246] hub 5-0:1.0: 8 ports detected
  306. [ 19.829559] pata_via 0000:00:0f.1: version 0.3.3
  307. [ 19.829582] ACPI: Unable to derive IRQ for device 0000:00:0f.1
  308. [ 19.830504] scsi2 : pata_via
  309. [ 19.830935] scsi3 : pata_via
  310. [ 19.832105] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
  311. [ 19.832107] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
  312. [ 19.995609] ata3.00: ATA-6: WDC WD800JB-00JJC0, 05.01C05, max UDMA/100
  313. [ 19.995613] ata3.00: 156301488 sectors, multi 16: LBA
  314. [ 20.003714] ata3.00: configured for UDMA/100
  315. [ 20.119880] usb 1-1: device not accepting address 2, error -71
  316. [ 20.324919] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
  317. [ 20.496983] ata4.00: configured for UDMA/33
  318. [ 20.497078] scsi 2:0:0:0: Direct-Access ATA WDC WD800JB-00JJ 05.0 PQ: 0 ANSI: 5
  319. [ 20.500897] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5
  320. [ 20.508922] Driver 'sd' needs updating - please use bus_type methods
  321. [ 20.508994] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
  322. [ 20.509004] sd 2:0:0:0: [sda] Write Protect is off
  323. [ 20.509006] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
  324. [ 20.509018] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  325. [ 20.509056] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
  326. [ 20.509063] sd 2:0:0:0: [sda] Write Protect is off
  327. [ 20.509065] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
  328. [ 20.509075] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  329. [ 20.509079] sda:<4>Driver 'sr' needs updating - please use bus_type methods
  330. [ 20.517604] sda1 sda2 sda3
  331. [ 20.518131] sd 2:0:0:0: [sda] Attached SCSI disk
  332. [ 20.522933] sd 2:0:0:0: Attached scsi generic sg0 type 0
  333. [ 20.522950] sr 3:0:0:0: Attached scsi generic sg1 type 5
  334. [ 20.539465] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  335. [ 20.539471] Uniform CD-ROM driver Revision: 3.20
  336. [ 20.539517] sr 3:0:0:0: Attached scsi CD-ROM sr0
  337. [ 20.765879] Attempting manual resume
  338. [ 20.765882] swsusp: Resume From Partition 8:1
  339. [ 20.765884] PM: Checking swsusp image.
  340. [ 20.766075] PM: Resume from disk failed.
  341. [ 20.772703] ReiserFS: sda2: found reiserfs format "3.6" with standard journal
  342. [ 20.772713] ReiserFS: sda2: using ordered data mode
  343. [ 20.783620] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
  344. [ 20.784638] ReiserFS: sda2: checking transaction log (sda2)
  345. [ 21.324978] ReiserFS: sda2: replayed 80 transactions in 1 seconds
  346. [ 21.325202] ReiserFS: sda2: Using r5 hash to sort names
  347. [ 21.689707] usb 1-1: new low speed USB device using uhci_hcd and address 4
  348. [ 21.882206] usb 1-1: configuration #1 chosen from 1 choice
  349. [ 22.128414] usb 1-2: new low speed USB device using uhci_hcd and address 5
  350. [ 22.308777] usb 1-2: configuration #1 chosen from 1 choice
  351. [ 29.634168] input: PC Speaker as /devices/platform/pcspkr/input/input1
  352. [ 30.139861] parport_pc 00:06: reported by Plug and Play ACPI
  353. [ 30.139901] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
  354. [ 30.176723] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  355. [ 30.206693] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  356. [ 30.326598] input: Power Button (FF) as /devices/virtual/input/input2
  357. [ 30.354503] ACPI: Power Button (FF) [PWRF]
  358. [ 30.354568] input: Power Button (CM) as /devices/virtual/input/input3
  359. [ 30.382479] ACPI: Power Button (CM) [PWRB]
  360. [ 30.831898] PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
  361. [ 30.831908] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 22
  362. [ 31.472561] usbcore: registered new interface driver hiddev
  363. [ 31.504916] input: HID 1241:1166 as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/input/input4
  364. [ 31.525348] input,hidraw0: USB HID v1.00 Mouse [HID 1241:1166] on usb-0000:00:10.0-1
  365. [ 31.538918] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/input/input5
  366. [ 31.561373] input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:10.0-2
  367. [ 31.561391] usbcore: registered new interface driver usbhid
  368. [ 31.561394] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
  369. [ 31.581207] PCI: Setting latency timer of device 0000:00:11.6 to 64
  370. [ 32.084937] ACPI: PCI interrupt for device 0000:00:11.6 disabled
  371. [ 32.084954] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
  372. [ 32.085098] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
  373. [ 32.085234] PCI: Setting latency timer of device 0000:00:11.5 to 64
  374. [ 33.739132] lp0: using parport0 (interrupt-driven).
  375. [ 33.809949] Adding 4000144k swap on /dev/sda1. Priority:-1 extents:1 across:4000144k
  376. [ 49.150157] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
  377. [ 49.150169] ReiserFS: sda3: using ordered data mode
  378. [ 49.153094] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
  379. [ 49.154141] ReiserFS: sda3: checking transaction log (sda3)
  380. [ 49.186984] ReiserFS: sda3: Using r5 hash to sort names
  381. [ 49.504028] ip_tables: (C) 2000-2006 Netfilter Core Team
  382. [ 49.832081] No dock devices found.
  383. [ 50.204543] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (1 cpu cores) (version 2.20.00)
  384. [ 50.204577] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8
  385. [ 50.204579] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa
  386. [ 50.204582] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc
  387. [ 50.204584] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
  388. [ 50.909623] ppdev: user-space parallel port driver
  389. [ 51.003679] audit(1212747449.286:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5022 profile="/usr/sbin/cupsd" namespace="default"
  390. [ 52.372436] Clocksource tsc unstable (delta = -89985360 ns)
  391. [ 52.373319] eth1: link down
  392. [ 52.393188] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  393. [ 52.466237] Bluetooth: Core ver 2.11
  394. [ 52.466715] NET: Registered protocol family 31
  395. [ 52.466719] Bluetooth: HCI device and connection manager initialized
  396. [ 52.466722] Bluetooth: HCI socket layer initialized
  397. [ 52.510502] Bluetooth: L2CAP ver 2.9
  398. [ 52.510506] Bluetooth: L2CAP socket layer initialized
  399. [ 52.549737] Bluetooth: RFCOMM socket layer initialized
  400. [ 52.549920] Bluetooth: RFCOMM TTY layer initialized
  401. [ 52.549923] Bluetooth: RFCOMM ver 1.8
  402. [ 54.396795] NET: Registered protocol family 17
  403. [ 55.660216] NET: Registered protocol family 10
  404. [ 55.660556] lo: Disabled Privacy Extensions
  405. [ 55.661175] ADDRCONF(NETDEV_UP): eth1: link is not ready
  406. [ 61.370151] eth0: no IPv6 routers present
RAW Paste Data