Data hosted with ♥ by Pastebin.com - Download Raw - See Original
  1. Secure key exist
  2.  
  3. AN7581DRAMC V0.8
  4. pkg_type is BGA1
  5. MPLL setting done !!!
  6. dram_type = PCDDR4, data_rate = 2666
  7. DIV mode = 1
  8. APHY RG Setting
  9. DelayCellTimex100 (cell=1086)
  10. MRW RK0 MR#2 = 0x30
  11. MRW RK0 MR#3 = 0x200
  12. MRW RK0 MR#1 = 0x101
  13. MRW RK0 MR#4 = 0x800
  14. MRW RK0 MR#5 = 0x400
  15. MRW RK0 MR#6 = 0xce0
  16. MRW RK0 MR#6 = 0xce0
  17. MRW RK0 MR#6 = 0xc60
  18. MRW RK0 MR#0 = 0xf44
  19. [Dramc] PCDDR AC Timing update
  20. DRVP driving setting info: 43
  21. ODTP driving setting info: 43
  22. DRVN driving setting info: 41
  23. ODTN driving setting info: 41
  24. MRW RK0 MR#2 = 0x30
  25. MRW RK0 MR#1 = 0x181
  26. MRW RK0 MR#1 = 0x101
  27. MRW RK0 MR#2 = 0x30
  28. MRW RK0 MR#3 = 0x204
  29. MRW RK0 MR#3 = 0x200
  30. MRW RK0 MR#6 = 0xcc0
  31. MRW RK0 MR#6 = 0xcc0
  32. MRW RK0 MR#6 = 0xc40
  33. MRW RK0 MR#6 = 0xcc0
  34. MRW RK0 MR#6 = 0xcc2
  35. MRW RK0 MR#6 = 0xc42
  36. MRW RK0 MR#6 = 0xcc0
  37. MRW RK0 MR#6 = 0xcc4
  38. MRW RK0 MR#6 = 0xc44
  39. MRW RK0 MR#6 = 0xcc0
  40. MRW RK0 MR#6 = 0xcc6
  41. MRW RK0 MR#6 = 0xc46
  42. MRW RK0 MR#6 = 0xcc0
  43. MRW RK0 MR#6 = 0xcc8
  44. MRW RK0 MR#6 = 0xc48
  45. MRW RK0 MR#6 = 0xcc0
  46. MRW RK0 MR#6 = 0xcca
  47. MRW RK0 MR#6 = 0xc4a
  48. MRW RK0 MR#6 = 0xcc0
  49. MRW RK0 MR#6 = 0xccc
  50. MRW RK0 MR#6 = 0xc4c
  51. MRW RK0 MR#6 = 0xcc0
  52. MRW RK0 MR#6 = 0xcce
  53. MRW RK0 MR#6 = 0xc4e
  54. MRW RK0 MR#6 = 0xcc0
  55. MRW RK0 MR#6 = 0xcd0
  56. MRW RK0 MR#6 = 0xc50
  57. MRW RK0 MR#6 = 0xcc0
  58. MRW RK0 MR#6 = 0xcd2
  59. MRW RK0 MR#6 = 0xc52
  60. MRW RK0 MR#6 = 0xcc0
  61. MRW RK0 MR#6 = 0xcd4
  62. MRW RK0 MR#6 = 0xc54
  63. MRW RK0 MR#6 = 0xcc0
  64. MRW RK0 MR#6 = 0xcd6
  65. MRW RK0 MR#6 = 0xc56
  66. MRW RK0 MR#6 = 0xcc0
  67. MRW RK0 MR#6 = 0xcd8
  68. MRW RK0 MR#6 = 0xc58
  69. MRW RK0 MR#6 = 0xcc0
  70. MRW RK0 MR#6 = 0xcda
  71. MRW RK0 MR#6 = 0xc5a
  72. MRW RK0 MR#6 = 0xcc0
  73. MRW RK0 MR#6 = 0xcdc
  74. MRW RK0 MR#6 = 0xc5c
  75. MRW RK0 MR#6 = 0xcc0
  76. MRW RK0 MR#6 = 0xcde
  77. MRW RK0 MR#6 = 0xc5e
  78. MRW RK0 MR#6 = 0xcc0
  79. MRW RK0 MR#6 = 0xce0
  80. MRW RK0 MR#6 = 0xc60
  81. MRW RK0 MR#6 = 0xcc0
  82. MRW RK0 MR#6 = 0xce2
  83. MRW RK0 MR#6 = 0xc62
  84. MRW RK0 MR#6 = 0xcc0
  85. MRW RK0 MR#6 = 0xce4
  86. MRW RK0 MR#6 = 0xc64
  87. MRW RK0 MR#6 = 0xcc0
  88. MRW RK0 MR#6 = 0xce6
  89. MRW RK0 MR#6 = 0xc66
  90. MRW RK0 MR#6 = 0xcc0
  91. MRW RK0 MR#6 = 0xce8
  92. MRW RK0 MR#6 = 0xc68
  93. MRW RK0 MR#6 = 0xcc0
  94. MRW RK0 MR#6 = 0xcea
  95. MRW RK0 MR#6 = 0xc6a
  96. MRW RK0 MR#6 = 0xcc0
  97. MRW RK0 MR#6 = 0xcec
  98. MRW RK0 MR#6 = 0xc6c
  99. MRW RK0 MR#6 = 0xcc0
  100. MRW RK0 MR#6 = 0xcee
  101. MRW RK0 MR#6 = 0xc6e
  102. MRW RK0 MR#6 = 0xcc0
  103. MRW RK0 MR#6 = 0xcf0
  104. MRW RK0 MR#6 = 0xc70
  105. MRW RK0 MR#6 = 0xcc0
  106. MRW RK0 MR#6 = 0xcf2
  107. MRW RK0 MR#6 = 0xc72
  108. MRW RK0 MR#6 = 0xcc0
  109. MRW RK0 MR#6 = 0xce9
  110. MRW RK0 MR#6 = 0xc69
  111. BG num = 2
  112. DRAM FLOW DONE!!!
  113. Secure key exist
  114. L2C_type:256K_L2C+256K_SRAM
  115. L1D cache size: 32 KB (with set/asso/line==128/4/64)
  116. L1I cache size: 32 KB (with set/asso/line==256/2/64)
  117. L2U cache size: 256 KB (with set/asso/line==256/16/64)
  118.  
  119.  
  120. U-Boot 2014.04-rc1 (Nov 26 2024 - 11:47:20) AXON 2.0
  121.  
  122. DRAM: 2 GiB
  123. AN7581GT
  124. Now running in RAM - U-Boot at: ffdb7000
  125. spi_nand_probe: mfr_id=0xef, dev_id=0xaa 0x23
  126. Set ECC threshold = 0x60
  127. Support SPI NAND erase statistic.
  128. Using Flash ECC.
  129. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_W25N04K, Flash Size=0x20000000
  130. bmt pool size: 250
  131. BMT & BBT Init Success
  132. FDT_MAGIC or IH_MAGIC check fail.
  133. Parse main image fail.
  134. In: serial
  135. Out: serial
  136. Err: serial
  137. CPU0: found redistributor 0 region 0:00000000ffe31028
  138. Net: ecnt_eth
  139. Uip activated
  140. No "gpio_active_high" at env file
  141.  
  142. Not found TC Phy
  143. Not found TC Phy
  144. Not found TC Phy
  145. Not found TC Phy
  146. ETH VER = ETH.2.2.1-R
  147. pr_idac = 0x100 ,RO_FL_Out = 0x417f
  148. pr_idac = 0x200 ,RO_FL_Out = 0xef60
  149. cdr_pr_idac_tmp = 0x200
  150. pr_idac = 0x300 ,RO_FL_Out = 0xc04b
  151. cdr_pr_idac_tmp = 0x300
  152. pr_idac = 0x400 ,RO_FL_Out = 0xa25f
  153. cdr_pr_idac_tmp = 0x400
  154. pr_idac = 0x500 ,RO_FL_Out = 0x8df6
  155. pr_idac = 0x600 ,RO_FL_Out = 0x7f11
  156. pr_idac = 0x700 ,RO_FL_Out = 0x73eb
  157. pr_idac = 0x480 ,RO_FL_Out = 0x9724
  158. cdr_pr_idac_tmp = 0x400
  159. pr_idac = 0x440 ,RO_FL_Out = 0x9c7e
  160. cdr_pr_idac_tmp = 0x400
  161. pr_idac = 0x420 ,RO_FL_Out = 0x9f48
  162. cdr_pr_idac_tmp = 0x420
  163. pr_idac = 0x430 ,RO_FL_Out = 0x9de1
  164. cdr_pr_idac_tmp = 0x420
  165. pr_idac = 0x428 ,RO_FL_Out = 0x9e82
  166. cdr_pr_idac_tmp = 0x420
  167. pr_idac = 0x424 ,RO_FL_Out = 0x9edc
  168. cdr_pr_idac_tmp = 0x420
  169. pr_idac = 0x422 ,RO_FL_Out = 0x9f1f
  170. cdr_pr_idac_tmp = 0x422
  171. pr_idac = 0x423 ,RO_FL_Out = 0x9f10
  172. cdr_pr_idac_tmp = 0x423
  173. sel_cdr_pr_idac = 0x423
  174. RO_state_freqdet = 0x0
  175. AN mode
  176. set mac reg init
  177. usxgmii_pcs_int en 1
  178. USXGMII_10G exit
  179. U-boot version: 2.0
  180. Hit any key to stop autoboot: 0
  181. read: src=0x600000, len=0x100000, dst=0x89000000
  182. bootm flag=0, states=70f
  183. ## Loading kernel from FIT Image at 89000000 ...
  184. Using 'conf-uboot' configuration
  185. Trying 'kernel-1' kernel subimage
  186. Description: ARM64 OpenWrt Linux-u-boot
  187. Type: Kernel Image
  188. Compression: lzma compressed
  189. Data Start: 0x890000e8
  190. Data Size: 268847 Bytes = 262.5 KiB
  191. Architecture: AArch64
  192. OS: Linux
  193. Load Address: 0x80200000
  194. Entry Point: 0x80200000
  195. Hash algo: crc32
  196. Hash value: 4015418f
  197. Hash algo: sha1
  198. Hash value: 71a536817d9d1ce634f8c884825d63610063a1ed
  199. Verifying Hash Integrity ... crc32+ sha1+ OK
  200. ## Loading fdt from FIT Image at 89000000 ...
  201. Using 'conf-uboot' configuration
  202. Trying 'fdt-1' fdt subimage
  203. Description: ARM64 OpenWrt gemtek_w1700k-ubi device tree blob
  204. Type: Flat Device Tree
  205. Compression: uncompressed
  206. Data Start: 0x89041c5c
  207. Data Size: 13112 Bytes = 12.8 KiB
  208. Architecture: AArch64
  209. Hash algo: crc32
  210. Hash value: 18c001d7
  211. Hash algo: sha1
  212. Hash value: 0b4ad1bd9084f5441d59ad31d6955d46c35ce856
  213. Verifying Hash Integrity ... crc32+ sha1+ OK
  214. Loading fdt from 0x89041c5c to 0x82000000
  215. Booting using the fdt blob at 0x82000000
  216. Uncompressing Kernel Image ... OK
  217. reserving fdt memory region: addr=80000000 size=200000
  218. Loading Device Tree to 00000000abff9000, end 00000000abfff337 ... OK
  219.  
  220. Starting kernel ...
  221.  
  222.  
  223.  
  224. U-Boot 2026.01-OpenWrt-r34154-35e3ed74fe (Apr 25 2026 - 02:23:42 +0000)
  225.  
  226. CPU: Airoha AN7581
  227. DRAM: 8 GiB (total 2 GiB)
  228. Core: 29 devices, 20 uclasses, devicetree: separate
  229. MMC: mmc@1fa0e000: 0
  230. Loading Environment from MMC... *** Warning - No block device, using default environment
  231.  
  232. Loading Environment from UBI... spi-nand: spi_nand nand@0: Winbond SPI NAND was found.
  233. spi-nand: spi_nand nand@0: 512 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
  234. Read 16384 bytes from volume ubootenv to 00000000ffb30a00
  235. Read 16384 bytes from volume ubootenv2 to 00000000ffb34a40
  236. *** Warning - bad CRC, using default environment
  237.  
  238. In: serial
  239. Out: serial
  240. Err: serial
  241. Net:
  242. Warning: ethernet@1fb50000 (eth0) using random MAC address - d6:a1:44:0b:ab:e0
  243. eth0: ethernet@1fb50000
  244.  
  245. *** U-Boot Boot Menu ***
  246.  
  247. 1. Run default boot command.
  248. 2. Boot system via TFTP.
  249. 3. Boot recovery system from flash.
  250. 4. Boot installer via TFTP.
  251. 5. Reboot.
  252. 0. Exit
  253.  
  254.  
  255. Press UP/DOWN to move, ENTER to select, ESC to quit
  256. U-Boot> setenv bootargs 'dyndbg="file phy_device.c +p" trace_event=mdio:mdio_access'
  257. U-Boot> run boot_production
  258. LED 'status:red' not found (err=-19)
  259. No size specified -> Using max size (17395712)
  260. Read 17395712 bytes from volume fit to 0000000081800000
  261.  
  262. ## Checking Image at 81800000 ...
  263. FIT image found
  264. FIT description: ARM64 OpenWrt FIT (Flattened Image Tree)
  265. Image 0 (kernel-1)
  266. Description: ARM64 OpenWrt Linux-6.12.85
  267. Type: Kernel Image
  268. Compression: gzip compressed
  269. Data Start: 0x81801000
  270. Data Size: 5929038 Bytes = 5.7 MiB
  271. Architecture: AArch64
  272. OS: Linux
  273. Load Address: 0x80200000
  274. Entry Point: 0x80200000
  275. Hash algo: crc32
  276. Hash value: 6f11a7a0
  277. Hash algo: sha1
  278. Hash value: 38c2e152cc922e523142f12178494240b60bdb58
  279. Image 1 (fdt-1)
  280. Description: ARM64 OpenWrt gemtek_w1700k-ubi device tree blob
  281. Type: Flat Device Tree
  282. Compression: uncompressed
  283. Data Start: 0x81da9000
  284. Data Size: 22096 Bytes = 21.6 KiB
  285. Architecture: AArch64
  286. Hash algo: crc32
  287. Hash value: f784639c
  288. Hash algo: sha1
  289. Hash value: 73b4ea7780e77dfff2d17b182cceebad88262cc2
  290. Image 2 (rootfs-1)
  291. Description: ARM64 OpenWrt gemtek_w1700k-ubi rootfs
  292. Type: Filesystem Image
  293. Compression: uncompressed
  294. Data Start: 0x81daf000
  295. Data Size: 11321344 Bytes = 10.8 MiB
  296. Hash algo: crc32
  297. Hash value: 790d117e
  298. Hash algo: sha1
  299. Hash value: 66ac1ef195a52184b3b20e05d5faef4f5273d33a
  300. Default Configuration: 'config-1'
  301. Configuration 0 (config-1)
  302. Description: OpenWrt gemtek_w1700k-ubi
  303. Kernel: kernel-1
  304. FDT: fdt-1
  305. Loadables: rootfs-1
  306. ## Checking hash(es) for FIT Image at 81800000 ...
  307. Hash(es) for Image 0 (kernel-1): crc32+ sha1+
  308. Hash(es) for Image 1 (fdt-1): crc32+ sha1+
  309. Hash(es) for Image 2 (rootfs-1): crc32+ sha1+
  310. ## Loading kernel (any) from FIT Image at 81800000 ...
  311. Using 'config-1' configuration
  312. Trying 'kernel-1' kernel subimage
  313. Description: ARM64 OpenWrt Linux-6.12.85
  314. Type: Kernel Image
  315. Compression: gzip compressed
  316. Data Start: 0x81801000
  317. Data Size: 5929038 Bytes = 5.7 MiB
  318. Architecture: AArch64
  319. OS: Linux
  320. Load Address: 0x80200000
  321. Entry Point: 0x80200000
  322. Hash algo: crc32
  323. Hash value: 6f11a7a0
  324. Hash algo: sha1
  325. Hash value: 38c2e152cc922e523142f12178494240b60bdb58
  326. Verifying Hash Integrity ... crc32+ sha1+ OK
  327. ## Loading fdt (any) from FIT Image at 81800000 ...
  328. Using 'config-1' configuration
  329. Trying 'fdt-1' fdt subimage
  330. Description: ARM64 OpenWrt gemtek_w1700k-ubi device tree blob
  331. Type: Flat Device Tree
  332. Compression: uncompressed
  333. Data Start: 0x81da9000
  334. Data Size: 22096 Bytes = 21.6 KiB
  335. Architecture: AArch64
  336. Hash algo: crc32
  337. Hash value: f784639c
  338. Hash algo: sha1
  339. Hash value: 73b4ea7780e77dfff2d17b182cceebad88262cc2
  340. Verifying Hash Integrity ... crc32+ sha1+ OK
  341. Booting using the fdt blob at 0x81da9000
  342. Working FDT set to 81da9000
  343. ## Loading loadables (any) from FIT Image at 81800000 ...
  344. Trying 'rootfs-1' loadables subimage
  345. Description: ARM64 OpenWrt gemtek_w1700k-ubi rootfs
  346. Type: Filesystem Image
  347. Compression: uncompressed
  348. Data Start: 0x81daf000
  349. Data Size: 11321344 Bytes = 10.8 MiB
  350. Hash algo: crc32
  351. Hash value: 790d117e
  352. Hash algo: sha1
  353. Hash value: 66ac1ef195a52184b3b20e05d5faef4f5273d33a
  354. Verifying Hash Integrity ... crc32+ sha1+ OK
  355. Uncompressing Kernel Image to 80200000
  356. Loading Device Tree to 00000000feb30000, end 00000000feb3864f ... OK
  357. Working FDT set to feb30000
  358.  
  359. Starting kernel ...
  360.  
  361. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  362. [ 0.000000] Linux version 6.12.85 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 14.3.0 r34061-39f528e440) 14.3.0, GNU ld (GNU Binutils) 2.44) #0 SMP Tue May 5 13:35:23 2026
  363. [ 0.000000] Machine model: Gemtek W1700K (OpenWrt U-Boot layout)
  364. [ 0.000000] OF: reserved mem: 0x0000000080000000..0x00000000801fffff (2048 KiB) nomap non-reusable atf@80000000
  365. [ 0.000000] OF: reserved mem: 0x0000000084000000..0x00000000849fffff (10240 KiB) nomap non-reusable npu-binary@84000000
  366. [ 0.000000] OF: reserved mem: 0x0000000087000000..0x0000000088ffffff (32768 KiB) nomap non-reusable qdma0-buf@87000000
  367. [ 0.000000] OF: reserved mem: 0x0000000089000000..0x0000000089ffffff (16384 KiB) nomap non-reusable qdma1-buf@89000000
  368. [ 0.000000] OF: reserved mem: 0x000000008a000000..0x000000008cbfffff (45056 KiB) nomap non-reusable npu-pkt@8a000000
  369. [ 0.000000] OF: reserved mem: 0x000000008cc00000..0x0000000090bfffff (65536 KiB) nomap non-reusable npu-txpkt@8cc00000
  370. [ 0.000000] OF: reserved mem: 0x0000000090c00000..0x0000000090c067ff (26 KiB) nomap non-reusable npu-txbufid@90c00000
  371. [ 0.000000] OF: reserved mem: 0x0000000090c06800..0x0000000090e067ff (2048 KiB) nomap non-reusable npu-ba@90c06800
  372. [ 0.000000] Zone ranges:
  373. [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
  374. [ 0.000000] DMA32 empty
  375. [ 0.000000] Normal empty
  376. [ 0.000000] Movable zone start for each node
  377. [ 0.000000] Early memory node ranges
  378. [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000801fffff]
  379. [ 0.000000] node 0: [mem 0x0000000080200000-0x0000000083ffffff]
  380. [ 0.000000] node 0: [mem 0x0000000084000000-0x00000000849fffff]
  381. [ 0.000000] node 0: [mem 0x0000000084a00000-0x0000000086ffffff]
  382. [ 0.000000] node 0: [mem 0x0000000087000000-0x0000000090e05fff]
  383. [ 0.000000] node 0: [mem 0x0000000090e07000-0x00000000ffffffff]
  384. [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
  385. [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
  386. [ 0.000000] psci: probing for conduit method from DT.
  387. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  388. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  389. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  390. [ 0.000000] psci: SMC Calling Convention v1.2
  391. [ 0.000000] percpu: Embedded 28 pages/cpu s76248 r8192 d30248 u114688
  392. [ 0.000000] Detected VIPT I-cache on CPU0
  393. [ 0.000000] CPU features: detected: GIC system register CPU interface
  394. [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration
  395. [ 0.000000] alternatives: applying boot alternatives
  396. [ 0.000000] Kernel command line: dyndbg="file phy_device.c +p" trace_event=mdio:mdio_access
  397. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  398. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  399. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 524287
  400. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  401. [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 2MB
  402. [ 0.000000] software IO TLB: area num 4.
  403. [ 0.000000] software IO TLB: mapped [mem 0x00000000ff6b0000-0x00000000ff8b0000] (2MB)
  404. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  405. [ 0.000000] rcu: Hierarchical RCU implementation.
  406. [ 0.000000] Tracing variant of Tasks RCU enabled.
  407. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  408. [ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
  409. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  410. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  411. [ 0.000000] GICv3: 256 SPIs implemented
  412. [ 0.000000] GICv3: 0 Extended SPIs implemented
  413. [ 0.000000] Root IRQ handler: gic_handle_irq
  414. [ 0.000000] GICv3: GICv3 features: 16 PPIs
  415. [ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0
  416. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000009080000
  417. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  418. [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
  419. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
  420. [ 0.000000] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
  421. [ 0.000126] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
  422. [ 0.000135] pid_max: default: 32768 minimum: 301
  423. [ 0.003537] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  424. [ 0.003550] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  425. [ 0.007078] rcu: Hierarchical SRCU implementation.
  426. [ 0.007088] rcu: Max phase no-delay instances is 1000.
  427. [ 0.007292] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
  428. [ 0.020914] smp: Bringing up secondary CPUs ...
  429. [ 0.022000] Detected VIPT I-cache on CPU1
  430. [ 0.022071] GICv3: CPU1: found redistributor 1 region 0:0x00000000090a0000
  431. [ 0.022107] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  432. [ 0.023466] Detected VIPT I-cache on CPU2
  433. [ 0.023539] GICv3: CPU2: found redistributor 2 region 0:0x00000000090c0000
  434. [ 0.023573] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  435. [ 0.024700] Detected VIPT I-cache on CPU3
  436. [ 0.024770] GICv3: CPU3: found redistributor 3 region 0:0x00000000090e0000
  437. [ 0.024803] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  438. [ 0.024908] smp: Brought up 1 node, 4 CPUs
  439. [ 0.024914] SMP: Total of 4 processors activated.
  440. [ 0.024917] CPU: All CPU(s) started at EL2
  441. [ 0.024920] CPU features: detected: 32-bit EL0 Support
  442. [ 0.024923] CPU features: detected: CRC32 instructions
  443. [ 0.024961] alternatives: applying system-wide alternatives
  444. [ 0.025100] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
  445. [ 0.025721] Memory: 1855000K/2097148K available (8896K kernel code, 1360K rwdata, 2664K rodata, 960K init, 320K bss, 230784K reserved, 0K cma-reserved)
  446. [ 0.029913] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  447. [ 0.029932] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  448. [ 0.030077] 29184 pages in range for non-PLT usage
  449. [ 0.030081] 520704 pages in range for PLT usage
  450. [ 0.031296] pinctrl core: initialized pinctrl subsystem
  451. [ 0.032582] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  452. [ 0.033007] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
  453. [ 0.033047] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  454. [ 0.033082] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  455. [ 0.033336] thermal_sys: Registered thermal governor 'step_wise'
  456. [ 0.033395] ASID allocator initialised with 65536 entries
  457. [ 0.035889] /soc/interrupt-controller@9000000: Fixed dependency cycle(s) with /soc/interrupt-controller@9000000
  458. [ 0.038383] /soc/pcie@1fc00000: Fixed dependency cycle(s) with /soc/pcie@1fc00000/interrupt-controller
  459. [ 0.038571] /soc/pcie@1fc40000: Fixed dependency cycle(s) with /soc/pcie@1fc40000/interrupt-controller
  460. [ 0.068634] clocksource: Switched to clocksource arch_sys_counter
  461. [ 0.071443] NET: Registered PF_INET protocol family
  462. [ 0.071579] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
  463. [ 0.074216] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
  464. [ 0.074248] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  465. [ 0.074260] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
  466. [ 0.074369] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
  467. [ 0.074903] TCP: Hash tables configured (established 16384 bind 16384)
  468. [ 0.075249] MPTCP token hash table entries: 2048 (order: 4, 49152 bytes, linear)
  469. [ 0.075430] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  470. [ 0.075474] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
  471. [ 0.075764] NET: Registered PF_UNIX/PF_LOCAL protocol family
  472. [ 0.075793] PCI: CLS 0 bytes, default 64
  473. [ 0.080087] workingset: timestamp_bits=46 max_order=19 bucket_order=0
  474. [ 0.085948] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  475. [ 0.085958] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  476. [ 0.146888] mtk-pcie-gen3 1fc00000.pcie: host bridge /soc/pcie@1fc00000 ranges:
  477. [ 0.146919] mtk-pcie-gen3 1fc00000.pcie: MEM 0x0020000000..0x0023ffffff -> 0x0020000000
  478. [ 0.248752] mtk-pcie-gen3 1fc00000.pcie: x2 mode enabled
  479. [ 0.248774] mtk-pcie-gen3 1fc00000.pcie: x2 mode: sister MAC mapped
  480. [ 2.488631] mtk-pcie-gen3 1fc00000.pcie: x2: link at Gen2, toggling serdes for Gen3
  481. [ 5.608628] mtk-pcie-gen3 1fc00000.pcie: x2: serdes toggle done, link retraining
  482. [ 5.608634] mtk-pcie-gen3 1fc00000.pcie: x2: init complete, PERST deasserted
  483. [ 5.609052] mtk-pcie-gen3 1fc00000.pcie: PCI host bridge to bus 0000:00
  484. [ 5.609066] pci_bus 0000:00: root bus resource [bus 00-ff]
  485. [ 5.609073] pci_bus 0000:00: root bus resource [mem 0x20000000-0x23ffffff]
  486. [ 5.609128] pci 0000:00:00.0: [14c3:6899] type 01 class 0x060400 PCIe Root Port
  487. [ 5.609143] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x00007fff 64bit]
  488. [ 5.609152] pci 0000:00:00.0: PCI bridge to [bus 00]
  489. [ 5.609159] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
  490. [ 5.609165] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff]
  491. [ 5.609174] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
  492. [ 5.609217] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
  493. [ 5.610473] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  494. [ 5.610588] pci 0000:01:00.0: [14c3:7990] type 00 class 0x028000 PCIe Endpoint
  495. [ 5.610612] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x001fffff 64bit pref]
  496. [ 5.610627] pci 0000:01:00.0: BAR 2 [mem 0x00000000-0x00007fff 64bit]
  497. [ 5.610717] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
  498. [ 5.628692] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  499. [ 5.628731] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff 64bit pref]: assigned
  500. [ 5.628741] pci 0000:00:00.0: bridge window [mem 0x20200000-0x202fffff]: assigned
  501. [ 5.628748] pci 0000:00:00.0: BAR 0 [mem 0x20300000-0x20307fff 64bit]: assigned
  502. [ 5.628761] pci 0000:01:00.0: BAR 0 [mem 0x20000000-0x201fffff 64bit pref]: assigned
  503. [ 5.628774] pci 0000:01:00.0: BAR 2 [mem 0x20200000-0x20207fff 64bit]: assigned
  504. [ 5.628786] pci 0000:00:00.0: PCI bridge to [bus 01]
  505. [ 5.628792] pci 0000:00:00.0: bridge window [mem 0x20200000-0x202fffff]
  506. [ 5.628799] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff 64bit pref]
  507. [ 5.628807] pci_bus 0000:00: resource 4 [mem 0x20000000-0x23ffffff]
  508. [ 5.628813] pci_bus 0000:01: resource 1 [mem 0x20200000-0x202fffff]
  509. [ 5.628819] pci_bus 0000:01: resource 2 [mem 0x20000000-0x201fffff 64bit pref]
  510. [ 5.629011] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  511. [ 5.630577] pcieport 0000:00:00.0: PME: Signaling with IRQ 17
  512. [ 5.630955] pcieport 0000:00:00.0: AER: enabled with IRQ 17
  513. [ 5.631482] mtk-pcie-gen3 1fc40000.pcie: host bridge /soc/pcie@1fc40000 ranges:
  514. [ 5.631511] mtk-pcie-gen3 1fc40000.pcie: MEM 0x0028000000..0x002bffffff -> 0x0028000000
  515. [ 6.068881] mtk-pcie-gen3 1fc40000.pcie: PCI host bridge to bus 0002:00
  516. [ 6.068899] pci_bus 0002:00: root bus resource [bus 00-ff]
  517. [ 6.068907] pci_bus 0002:00: root bus resource [mem 0x28000000-0x2bffffff]
  518. [ 6.068940] pci 0002:00:00.0: [14c3:6899] type 01 class 0x060400 PCIe Root Port
  519. [ 6.068955] pci 0002:00:00.0: BAR 0 [mem 0x00000000-0x00007fff 64bit]
  520. [ 6.068963] pci 0002:00:00.0: PCI bridge to [bus 00]
  521. [ 6.068971] pci 0002:00:00.0: bridge window [io 0x0000-0x0fff]
  522. [ 6.068977] pci 0002:00:00.0: bridge window [mem 0x00000000-0x000fffff]
  523. [ 6.068986] pci 0002:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
  524. [ 6.069027] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
  525. [ 6.070256] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  526. [ 6.070349] pci 0002:01:00.0: [14c3:7991] type 00 class 0x028000 PCIe Endpoint
  527. [ 6.070374] pci 0002:01:00.0: BAR 0 [mem 0x00000000-0x001fffff 64bit pref]
  528. [ 6.070390] pci 0002:01:00.0: BAR 2 [mem 0x00000000-0x00007fff 64bit]
  529. [ 6.070498] pci 0002:01:00.0: PME# supported from D0 D3hot D3cold
  530. [ 6.070540] pci 0002:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0002:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
  531. [ 6.088688] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
  532. [ 6.088727] pci 0002:00:00.0: bridge window [mem 0x28000000-0x281fffff 64bit pref]: assigned
  533. [ 6.088736] pci 0002:00:00.0: bridge window [mem 0x28200000-0x282fffff]: assigned
  534. [ 6.088743] pci 0002:00:00.0: BAR 0 [mem 0x28300000-0x28307fff 64bit]: assigned
  535. [ 6.088756] pci 0002:01:00.0: BAR 0 [mem 0x28000000-0x281fffff 64bit pref]: assigned
  536. [ 6.088771] pci 0002:01:00.0: BAR 2 [mem 0x28200000-0x28207fff 64bit]: assigned
  537. [ 6.088784] pci 0002:00:00.0: PCI bridge to [bus 01]
  538. [ 6.088791] pci 0002:00:00.0: bridge window [mem 0x28200000-0x282fffff]
  539. [ 6.088798] pci 0002:00:00.0: bridge window [mem 0x28000000-0x281fffff 64bit pref]
  540. [ 6.088806] pci_bus 0002:00: resource 4 [mem 0x28000000-0x2bffffff]
  541. [ 6.088813] pci_bus 0002:01: resource 1 [mem 0x28200000-0x282fffff]
  542. [ 6.088819] pci_bus 0002:01: resource 2 [mem 0x28000000-0x281fffff 64bit pref]
  543. [ 6.088984] pcieport 0002:00:00.0: enabling device (0000 -> 0002)
  544. [ 6.090492] pcieport 0002:00:00.0: PME: Signaling with IRQ 20
  545. [ 6.090879] pcieport 0002:00:00.0: AER: enabled with IRQ 20
  546. [ 6.091604] airoha-cpu-pmdomain 1fa20000.cpufreq: ATF SMC not available, using direct PLL programming
  547. [ 6.091614] airoha-cpu-pmdomain 1fa20000.cpufreq: CPU frequency: 1200 MHz
  548. [ 6.092430] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
  549. [ 6.093500] printk: legacy console [ttyS0] disabled
  550. [ 6.093772] 1fbf0000.serial: ttyS0 at MMIO 0x1fbf0000 (irq = 21, base_baud = 115200) is a 16550
  551. [ 6.093800] printk: legacy console [ttyS0] enabled
  552. [ 7.380115] 1fbf0300.serial: ttyS1 at MMIO 0x1fbf0300 (irq = 22, base_baud = 460800) is a Airoha 16550
  553. [ 7.390503] 1fbe1000.serial: ttyS2 at MMIO 0x1fbe1000 (irq = 23, base_baud = 460800) is a Airoha 16550
  554. [ 7.401298] random: crng init done
  555. [ 7.406096] spi-nand spi0.0: Winbond SPI NAND was found.
  556. [ 7.411480] spi-nand spi0.0: 512 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
  557. [ 7.420329] 4 fixed-partitions partitions found on MTD device spi0.0
  558. [ 7.426911] Creating 4 MTD partitions on "spi0.0":
  559. [ 7.431726] 0x000000000000-0x000000600000 : "vendor"
  560. [ 7.449563] 0x000000600000-0x000000700000 : "chainloader"
  561. [ 7.457617] 0x000000700000-0x00001be00000 : "ubi"
  562. [ 8.345629] ubi0: attaching mtd2
  563. [ 10.053505] ubi0: scanning is finished
  564. [ 10.066934] ubi0: attached mtd2 (name "ubi", size 439 MiB)
  565. [ 10.072473] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  566. [ 10.079363] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  567. [ 10.086150] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  568. [ 10.093119] ubi0: good PEBs: 3512, bad PEBs: 0, corrupted PEBs: 0
  569. [ 10.099212] ubi0: user volume: 6, internal volumes: 1, max. volumes count: 128
  570. [ 10.106428] ubi0: max/mean erase counter: 8/5, WL threshold: 4096, image sequence number: 910861646
  571. [ 10.115479] ubi0: available PEBs: 0, total reserved PEBs: 3512, PEBs reserved for bad PEB handling: 80
  572. [ 10.124801] ubi0: background thread "ubi_bgt0d" started, PID 219
  573. [ 10.126337] block ubiblock0_4: created from ubi0:4(fit)
  574. [ 10.136208] 0x00001be00000-0x000020000000 : "reserved_bmt"
  575. [ 10.290564] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  576. [ 10.297344] NET: Registered PF_INET6 protocol family
  577. [ 10.303288] Segment Routing with IPv6
  578. [ 10.306988] In-situ OAM (IOAM) with IPv6
  579. [ 10.311016] NET: Registered PF_PACKET protocol family
  580. [ 10.316112] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  581. [ 10.329236] 8021q: 802.1Q VLAN Support v1.8
  582. [ 10.344670] FIT: Detected U-Boot 2026.01-OpenWrt-r34154-35e3ed74fe
  583. [ 10.350903] FIT: Selected configuration: "config-1" (OpenWrt gemtek_w1700k-ubi)
  584. [ 10.358231] FIT: kernel sub-image 0x00001000..0x005a884d "kernel-1" (ARM64 OpenWrt Linux-6.12.85)
  585. [ 10.368093] FIT: flat_dt sub-image 0x005a9000..0x005ae64f "fdt-1" (ARM64 OpenWrt gemtek_w1700k-ubi device tree blob)
  586. [ 10.379507] FIT: filesystem sub-image 0x005af000..0x0107afff "rootfs-1" (ARM64 OpenWrt gemtek_w1700k-ubi rootfs)
  587. [ 10.390734] block ubiblock0_4: mapped 1 uImage.FIT filesystem sub-image as /dev/fit0
  588. [ 10.398994] clk: Disabling unused clocks
  589. [ 10.402941] PM: genpd: Disabling unused power domains
  590. [ 10.413001] VFS: Mounted root (squashfs filesystem) readonly on device 259:0.
  591. [ 10.420455] Freeing unused kernel memory: 960K
  592. [ 10.424947] Run /sbin/init as init process
  593. [ 10.691581] init: Console is alive
  594. [ 10.695128] init: - watchdog -
  595. [ 11.197552] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  596. [ 11.232990] gpio_button_hotplug: loading out-of-tree module taints kernel.
  597. [ 11.518780] airoha-npu 1e900000.npu: NPU fw version: 0.1111
  598. [ 12.880928] mt7530-mmio 1fb58000.switch: configuring for fixed/internal link mode
  599. [ 12.888729] mt7530-mmio 1fb58000.switch lan3 (uninitialized): PHY [mt7530_dsa-0:09] driver [Airoha AN7581 PHY] (irq=51)
  600. [ 12.900856] mt7530-mmio 1fb58000.switch lan4 (uninitialized): PHY [mt7530_dsa-0:0a] driver [Airoha AN7581 PHY] (irq=52)
  601. [ 12.912918] airoha_eth 1fb50000.ethernet eth0: entered promiscuous mode
  602. [ 12.919708] DSA: tree 0 setup
  603. [ 12.922700] mt7530-nl: genl_register_family_with_ops
  604. [ 12.928558] mt7530-mmio 1fb58000.switch: Link is Up - 10Gbps/Full - flow control rx/tx
  605. [ 12.953877] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  606. [ 12.969857] init: - preinit -
  607. [ 13.404985] airoha_eth 1fb50000.ethernet wan: renamed from eth1
  608. [ 13.414333] airoha_eth 1fb50000.ethernet lan2: renamed from eth2
  609. Cannot parse config file '/etc/fw_env.config': No such file or directory
  610. Failed to find NVMEM device
  611. [ 13.949349] Realtek RTL8261N mt7530_dsa-0:05: rtkphy_config_init:80 [RTL8261N/RTL8264/RTL826XB] phy_id: 0x1CCAF3 PHYAD:5
  612. [ 14.250332] airoha_eth 1fb50000.ethernet lan2: PHY [mt7530_dsa-0:05] driver [Realtek RTL8261N] (irq=POLL)
  613. [ 14.259938] airoha_eth 1fb50000.ethernet lan2: configuring for phy/usxgmii link mode
  614. Press the [f] key and hit [enter] to enter failsafe mode
  615. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  616. [ 18.611595] UBIFS (ubi0:5): Mounting in unauthenticated mode
  617. [ 18.617381] UBIFS (ubi0:5): background thread "ubifs_bgt0_5" started, PID 881
  618. [ 18.647879] UBIFS (ubi0:5): recovery needed
  619. [ 18.726469] UBIFS (ubi0:5): recovery completed
  620. [ 18.731015] UBIFS (ubi0:5): UBIFS: mounted UBI device 0, volume 5, name "rootfs_data"
  621. [ 18.738863] UBIFS (ubi0:5): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  622. [ 18.748799] UBIFS (ubi0:5): FS size: 401625088 bytes (383 MiB, 3163 LEBs), max 3178 LEBs, journal size 20062208 bytes (19 MiB, 158 LEBs)
  623. [ 18.761072] UBIFS (ubi0:5): reserved for root: 4952683 bytes (4836 KiB)
  624. [ 18.767687] UBIFS (ubi0:5): media format: w5/r0 (latest is w5/r0), UUID 49760471-7470-407E-BFD1-04BB5330E0B5, small LPT model
  625. [ 18.782308] mount_root: switching to ubifs overlay
  626. [ 18.796504] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
  627. [ 18.812770] urandom-seed: Seeding with /etc/urandom.seed
  628. [ 19.116120] procd: - early -
  629. [ 19.119275] procd: - watchdog -
  630. [ 19.674784] procd: - watchdog -
  631. [ 19.680200] procd: - ubus -
  632. [ 19.779361] procd: - init -
  633. Please press Enter to activate this console.
  634. [ 20.140741] kmodloader: loading kernel modules from /etc/modules.d/*
  635. [ 20.156953] i2c_dev: i2c /dev entries driver
  636. [ 20.163145] i2c-mt7621 1fbf8000.i2c0: clock 100 kHz
  637. [ 20.174763] Bridge firewalling registered
  638. [ 20.179721] Loading modules backported from Linux version v6.18.26-0-g1fe060681
  639. [ 20.187046] Backport generated by backports.git 6ecbb44
  640. [ 20.211585] xt_time: kernel timezone is -0000
  641. [ 20.317829] mt7996e_hif 0002:01:00.0: enabling device (0000 -> 0002)
  642. [ 20.324461] mt7996e 0000:01:00.0: enabling device (0000 -> 0002)
  643. [ 20.413119] urngd: v1.0.2 started.
  644. [ 20.499218] mt7996e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20260311120419a
  645. [ 20.499218]
  646. [ 20.851935] mt7996e 0000:01:00.0: WM Firmware Version: ____000000, Build Time: 20260311120504
  647. [ 20.892180] mt7996e 0000:01:00.0: DSP Firmware Version: ____000000, Build Time: 20260311120415
  648. [ 20.975327] mt7996e 0000:01:00.0: WA Firmware Version: ____000000, Build Time: 20260311120325
  649. [ 21.425358] mt7996e 0000:01:00.0: NPU version: 0.1111
  650. [ 21.487106] PPP generic driver version 2.4.2
  651. [ 21.492854] NET: Registered PF_PPPOX protocol family
  652. [ 21.502368] kmodloader: done loading kernel modules from /etc/modules.d/*
  653. [ 25.248905] Realtek RTL8261N mt7530_dsa-0:05: rtkphy_config_init:80 [RTL8261N/RTL8264/RTL826XB] phy_id: 0x1CCAF3 PHYAD:5
  654. [ 25.547089] airoha_eth 1fb50000.ethernet lan2: PHY [mt7530_dsa-0:05] driver [Realtek RTL8261N] (irq=POLL)
  655. [ 25.556733] airoha_eth 1fb50000.ethernet lan2: configuring for phy/usxgmii link mode
  656. [ 25.579842] br-lan: port 1(lan2) entered blocking state
  657. [ 25.585099] br-lan: port 1(lan2) entered disabled state
  658. [ 25.590483] airoha_eth 1fb50000.ethernet lan2: entered allmulticast mode
  659. [ 25.597417] airoha_eth 1fb50000.ethernet lan2: entered promiscuous mode
  660. [ 25.619579] mt7530-mmio 1fb58000.switch lan3: configuring for phy/internal link mode
  661. [ 25.628550] br-lan: port 2(lan3) entered blocking state
  662. [ 25.633933] br-lan: port 2(lan3) entered disabled state
  663. [ 25.639258] mt7530-mmio 1fb58000.switch lan3: entered allmulticast mode
  664. [ 25.645889] airoha_eth 1fb50000.ethernet eth0: entered allmulticast mode
  665. [ 25.652962] mt7530-mmio 1fb58000.switch lan3: entered promiscuous mode
  666. [ 25.663194] mt7530-mmio 1fb58000.switch lan4: configuring for phy/internal link mode
  667. [ 25.672202] br-lan: port 3(lan4) entered blocking state
  668. [ 25.677464] br-lan: port 3(lan4) entered disabled state
  669. [ 25.682848] mt7530-mmio 1fb58000.switch lan4: entered allmulticast mode
  670. [ 25.689868] mt7530-mmio 1fb58000.switch lan4: entered promiscuous mode
  671. [ 25.706667] Realtek RTL8261N mt7530_dsa-0:08: rtkphy_config_init:80 [RTL8261N/RTL8264/RTL826XB] phy_id: 0x1CCAF3 PHYAD:8
  672. [ 26.059762] airoha_eth 1fb50000.ethernet wan: PHY [mt7530_dsa-0:08] driver [Realtek RTL8261N] (irq=POLL)
  673. [ 26.069326] airoha_eth 1fb50000.ethernet wan: configuring for phy/usxgmii link mode
  674. [ 30.250791] airoha_eth 1fb50000.ethernet wan: Link is Up - 10Gbps/Full - flow control off
  675. [ 39.564109] br-lan: port 4(phy0.0-ap0) entered blocking state
  676. [ 39.569967] br-lan: port 4(phy0.0-ap0) entered disabled state
  677. [ 39.575777] mt7996e 0000:01:00.0 phy0.0-ap0: entered allmulticast mode
  678. [ 39.582650] mt7996e 0000:01:00.0 phy0.0-ap0: entered promiscuous mode
  679. [ 39.976456] br-lan: port 4(phy0.0-ap0) entered blocking state
  680. [ 39.982312] br-lan: port 4(phy0.0-ap0) entered forwarding state
  681. [ 40.534080] br-lan: port 5(phy0.1-ap0) entered blocking state
  682. [ 40.540001] br-lan: port 5(phy0.1-ap0) entered disabled state
  683. [ 40.545868] mt7996e 0000:01:00.0 phy0.1-ap0: entered allmulticast mode
  684. [ 40.552764] mt7996e 0000:01:00.0 phy0.1-ap0: entered promiscuous mode
  685. [ 40.569693] br-lan: port 5(phy0.1-ap0) entered blocking state
  686. [ 40.575497] br-lan: port 5(phy0.1-ap0) entered forwarding state
  687. [ 40.582150] br-lan: port 5(phy0.1-ap0) entered disabled state
  688. [ 40.791425] br-lan: port 6(phy0.2-ap0) entered blocking state
  689. [ 40.797220] br-lan: port 6(phy0.2-ap0) entered disabled state
  690. [ 40.803115] mt7996e 0000:01:00.0 phy0.2-ap0: entered allmulticast mode
  691. [ 40.809959] mt7996e 0000:01:00.0 phy0.2-ap0: entered promiscuous mode
  692. [ 40.826573] br-lan: port 6(phy0.2-ap0) entered blocking state
  693. [ 40.832385] br-lan: port 6(phy0.2-ap0) entered forwarding state
  694. [ 40.838879] br-lan: port 6(phy0.2-ap0) entered disabled state
  695. [ 41.212867] airoha_eth 1fb50000.ethernet lan2: Link is Up - 10Gbps/Full - flow control rx/tx
  696. [ 41.221482] br-lan: port 1(lan2) entered blocking state
  697. [ 41.226752] br-lan: port 1(lan2) entered forwarding state
  698.  
  699.