Data hosted with ♥ by Pastebin.com - Download Raw - See Original
  1. Watchdog handover: fd=3
  2. - watchdog -
  3. Watchdog does not have CARDRESET support
  4. [ 1938.527318] mt7996e 0000:01:00.0 phy0.0-ap0: left allmulticast mode
  5. [ 1938.533642] mt7996e 0000:01:00.0 phy0.0-ap0: left promiscuous mode
  6. [ 1938.539994] br-lan: port 4(phy0.0-ap0) entered disabled state
  7. [ 1938.707432] mt7996e 0000:01:00.0 phy0.1-ap0: left allmulticast mode
  8. [ 1938.713763] mt7996e 0000:01:00.0 phy0.1-ap0: left promiscuous mode
  9. [ 1938.720155] br-lan: port 5(phy0.1-ap0) entered disabled state
  10. Mon May 4 10:56:59 CEST 2026 upgrade: Sending TERM to remaining processes ...
  11. Mon May 4 10:56:59 CEST 2026 upgrade: Sending signal TERM to sleep (16674)
  12. [ 1938.807420] mt7996e 0000:01:00.0 phy0.2-ap0: left allmulticast mode
  13. Mo[ 1938.813750] mt7996e 0000:01:00.0 phy0.2-ap0: left promiscuous mode
  14. n M[ 1938.820239] br-lan: port 6(phy0.2-ap0) entered disabled state
  15. ay 4 10:56:59 CEST 2026 upgrade: Sending signal TERM to hostapd (1816)
  16. Mon May 4 10:56:59 CEST 2026 upgrade: Sending signal TERM to hostapd (1862)
  17. Mon May 4 10:57:03 CEST 2026 upgrade: Sending KILL to remaining processes ...
  18. [ 1949.144982] stage2 (17036): drop_caches: 3
  19. Mon May 4 10:57:10 CEST 2026 upgrade: Switching to ramdisk...
  20. [ 1950.963406] UBIFS (ubi0:5): background thread "ubifs_bgt0_5" stops
  21. [ 1950.979825] UBIFS (ubi0:5): un-mount UBI device 0
  22. Mon May 4 08:57:12 UTC 2026 upgrade: Performing system upgrade...
  23. fitblk: /dev/fit0 released
  24. [ 1951.774101] block ubiblock0_4: released
  25. [ 1952.291727] block ubiblock0_4: created from ubi0:4(fit)
  26. Volume ID 4, size 133 LEBs (16887808 bytes, 16.1 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "fit", alignment 1
  27. Set volume size to 404037632
  28. Volume ID 5, size 3182 LEBs (404037632 bytes, 385.3 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs_data", alignment 1
  29. [ 1958.404310] UBIFS (ubi0:5): default file-system created
  30. [ 1958.410070] UBIFS (ubi0:5): Mounting in unauthenticated mode
  31. [ 1958.415890] UBIFS (ubi0:5): background thread "ubifs_bgt0_5" started, PID 17841
  32. [ 1958.464799] UBIFS (ubi0:5): UBIFS: mounted UBI device 0, volume 5, name "rootfs_data"
  33. [ 1958.472648] UBIFS (ubi0:5): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  34. [ 1958.482586] UBIFS (ubi0:5): FS size: 402132992 bytes (383 MiB, 3167 LEBs), max 3182 LEBs, journal size 20189184 bytes (19 MiB, 159 LEBs)
  35. [ 1958.494849] UBIFS (ubi0:5): reserved for root: 4952683 bytes (4836 KiB)
  36. [ 1958.501465] UBIFS (ubi0:5): media format: w5/r0 (latest is w5/r0), UUID C87FF8EB-FE74-4774-BD5B-AF66C09C0AC3, small LPT model
  37. [ 1958.529931] UBIFS (ubi0:5): un-mount UBI device 0
  38. [ 1958.534711] UBIFS (ubi0:5): background thread "ubifs_bgt0_5" stops
  39. configuration saved
  40. sysupgrade successful
  41. umount: can't unmount /dev: Resource busy
  42. umount: can't unmount /tmp: Resource busy
  43. [ 1958.624026] br-lan: port 3(lan4) entered disabled state
  44. [ 1958.629439] br-lan: port 2(lan3) entered disabled state
  45. [ 1958.642300] reboot: Restarting system
  46. Secure key exist
  47.  
  48. AN7581DRAMC V0.8
  49. pkg_type is BGA1
  50. MPLL setting done !!!
  51. dram_type = PCDDR4, data_rate = 2666
  52. DIV mode = 1
  53. APHY RG Setting
  54. DelayCellTimex100 (cell=1086)
  55. MRW RK0 MR#2 = 0x30
  56. MRW RK0 MR#3 = 0x200
  57. MRW RK0 MR#1 = 0x101
  58. MRW RK0 MR#4 = 0x800
  59. MRW RK0 MR#5 = 0x400
  60. MRW RK0 MR#6 = 0xce0
  61. MRW RK0 MR#6 = 0xce0
  62. MRW RK0 MR#6 = 0xc60
  63. MRW RK0 MR#0 = 0xf44
  64. [Dramc] PCDDR AC Timing update
  65. DRVP driving setting info: 43
  66. ODTP driving setting info: 43
  67. DRVN driving setting info: 41
  68. ODTN driving setting info: 41
  69. MRW RK0 MR#2 = 0x30
  70. MRW RK0 MR#1 = 0x181
  71. MRW RK0 MR#1 = 0x101
  72. MRW RK0 MR#2 = 0x30
  73. MRW RK0 MR#3 = 0x204
  74. MRW RK0 MR#3 = 0x200
  75. MRW RK0 MR#6 = 0xcc0
  76. MRW RK0 MR#6 = 0xcc0
  77. MRW RK0 MR#6 = 0xc40
  78. MRW RK0 MR#6 = 0xcc0
  79. MRW RK0 MR#6 = 0xcc2
  80. MRW RK0 MR#6 = 0xc42
  81. MRW RK0 MR#6 = 0xcc0
  82. MRW RK0 MR#6 = 0xcc4
  83. MRW RK0 MR#6 = 0xc44
  84. MRW RK0 MR#6 = 0xcc0
  85. MRW RK0 MR#6 = 0xcc6
  86. MRW RK0 MR#6 = 0xc46
  87. MRW RK0 MR#6 = 0xcc0
  88. MRW RK0 MR#6 = 0xcc8
  89. MRW RK0 MR#6 = 0xc48
  90. MRW RK0 MR#6 = 0xcc0
  91. MRW RK0 MR#6 = 0xcca
  92. MRW RK0 MR#6 = 0xc4a
  93. MRW RK0 MR#6 = 0xcc0
  94. MRW RK0 MR#6 = 0xccc
  95. MRW RK0 MR#6 = 0xc4c
  96. MRW RK0 MR#6 = 0xcc0
  97. MRW RK0 MR#6 = 0xcce
  98. MRW RK0 MR#6 = 0xc4e
  99. MRW RK0 MR#6 = 0xcc0
  100. MRW RK0 MR#6 = 0xcd0
  101. MRW RK0 MR#6 = 0xc50
  102. MRW RK0 MR#6 = 0xcc0
  103. MRW RK0 MR#6 = 0xcd2
  104. MRW RK0 MR#6 = 0xc52
  105. MRW RK0 MR#6 = 0xcc0
  106. MRW RK0 MR#6 = 0xcd4
  107. MRW RK0 MR#6 = 0xc54
  108. MRW RK0 MR#6 = 0xcc0
  109. MRW RK0 MR#6 = 0xcd6
  110. MRW RK0 MR#6 = 0xc56
  111. MRW RK0 MR#6 = 0xcc0
  112. MRW RK0 MR#6 = 0xcd8
  113. MRW RK0 MR#6 = 0xc58
  114. MRW RK0 MR#6 = 0xcc0
  115. MRW RK0 MR#6 = 0xcda
  116. MRW RK0 MR#6 = 0xc5a
  117. MRW RK0 MR#6 = 0xcc0
  118. MRW RK0 MR#6 = 0xcdc
  119. MRW RK0 MR#6 = 0xc5c
  120. MRW RK0 MR#6 = 0xcc0
  121. MRW RK0 MR#6 = 0xcde
  122. MRW RK0 MR#6 = 0xc5e
  123. MRW RK0 MR#6 = 0xcc0
  124. MRW RK0 MR#6 = 0xce0
  125. MRW RK0 MR#6 = 0xc60
  126. MRW RK0 MR#6 = 0xcc0
  127. MRW RK0 MR#6 = 0xce2
  128. MRW RK0 MR#6 = 0xc62
  129. MRW RK0 MR#6 = 0xcc0
  130. MRW RK0 MR#6 = 0xce4
  131. MRW RK0 MR#6 = 0xc64
  132. MRW RK0 MR#6 = 0xcc0
  133. MRW RK0 MR#6 = 0xce6
  134. MRW RK0 MR#6 = 0xc66
  135. MRW RK0 MR#6 = 0xcc0
  136. MRW RK0 MR#6 = 0xce8
  137. MRW RK0 MR#6 = 0xc68
  138. MRW RK0 MR#6 = 0xcc0
  139. MRW RK0 MR#6 = 0xcea
  140. MRW RK0 MR#6 = 0xc6a
  141. MRW RK0 MR#6 = 0xcc0
  142. MRW RK0 MR#6 = 0xcec
  143. MRW RK0 MR#6 = 0xc6c
  144. MRW RK0 MR#6 = 0xcc0
  145. MRW RK0 MR#6 = 0xcee
  146. MRW RK0 MR#6 = 0xc6e
  147. MRW RK0 MR#6 = 0xcc0
  148. MRW RK0 MR#6 = 0xcf0
  149. MRW RK0 MR#6 = 0xc70
  150. MRW RK0 MR#6 = 0xcc0
  151. MRW RK0 MR#6 = 0xcf2
  152. MRW RK0 MR#6 = 0xc72
  153. MRW RK0 MR#6 = 0xcc0
  154. MRW RK0 MR#6 = 0xce9
  155. MRW RK0 MR#6 = 0xc69
  156. BG num = 2
  157. DRAM FLOW DONE!!!
  158. Secure key exist
  159. L2C_type:256K_L2C+256K_SRAM
  160. L1D cache size: 32 KB (with set/asso/line==128/4/64)
  161. L1I cache size: 32 KB (with set/asso/line==256/2/64)
  162. L2U cache size: 256 KB (with set/asso/line==256/16/64)
  163.  
  164.  
  165. U-Boot 2014.04-rc1 (Nov 26 2024 - 11:47:20) AXON 2.0
  166.  
  167. DRAM: 2 GiB
  168. AN7581GT
  169. Now running in RAM - U-Boot at: ffdb7000
  170. spi_nand_probe: mfr_id=0xef, dev_id=0xaa 0x23
  171. Set ECC threshold = 0x60
  172. Support SPI NAND erase statistic.
  173. Using Flash ECC.
  174. Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_W25N04K, Flash Size=0x20000000
  175. bmt pool size: 250
  176. BMT & BBT Init Success
  177. FDT_MAGIC or IH_MAGIC check fail.
  178. Parse main image fail.
  179. In: serial
  180. Out: serial
  181. Err: serial
  182. CPU0: found redistributor 0 region 0:00000000ffe31028
  183. Net: ecnt_eth
  184. Uip activated
  185. No "gpio_active_high" at env file
  186.  
  187. Not found TC Phy
  188. Not found TC Phy
  189. Not found TC Phy
  190. Not found TC Phy
  191. ETH VER = ETH.2.2.1-R
  192. pr_idac = 0x100 ,RO_FL_Out = 0x4122
  193. pr_idac = 0x200 ,RO_FL_Out = 0xef28
  194. cdr_pr_idac_tmp = 0x200
  195. pr_idac = 0x300 ,RO_FL_Out = 0xc039
  196. cdr_pr_idac_tmp = 0x300
  197. pr_idac = 0x400 ,RO_FL_Out = 0xa280
  198. cdr_pr_idac_tmp = 0x400
  199. pr_idac = 0x500 ,RO_FL_Out = 0x8e02
  200. pr_idac = 0x600 ,RO_FL_Out = 0x7f35
  201. pr_idac = 0x700 ,RO_FL_Out = 0x7420
  202. pr_idac = 0x480 ,RO_FL_Out = 0x977f
  203. cdr_pr_idac_tmp = 0x400
  204. pr_idac = 0x440 ,RO_FL_Out = 0x9cd1
  205. cdr_pr_idac_tmp = 0x400
  206. pr_idac = 0x420 ,RO_FL_Out = 0x9fa0
  207. cdr_pr_idac_tmp = 0x420
  208. pr_idac = 0x430 ,RO_FL_Out = 0x9e39
  209. cdr_pr_idac_tmp = 0x420
  210. pr_idac = 0x428 ,RO_FL_Out = 0x9ed4
  211. cdr_pr_idac_tmp = 0x420
  212. pr_idac = 0x424 ,RO_FL_Out = 0x9f41
  213. cdr_pr_idac_tmp = 0x424
  214. pr_idac = 0x426 ,RO_FL_Out = 0x9ef9
  215. cdr_pr_idac_tmp = 0x426
  216. pr_idac = 0x427 ,RO_FL_Out = 0x9efe
  217. cdr_pr_idac_tmp = 0x427
  218. sel_cdr_pr_idac = 0x427
  219. RO_state_freqdet = 0x0
  220. AN mode
  221. set mac reg init
  222. usxgmii_pcs_int en 1
  223. USXGMII_10G exit
  224. U-boot version: 2.0
  225. Hit any key to stop autoboot: 0
  226. read: src=0x600000, len=0x100000, dst=0x89000000
  227. bootm flag=0, states=70f
  228. ## Loading kernel from FIT Image at 89000000 ...
  229. Using 'conf-uboot' configuration
  230. Trying 'kernel-1' kernel subimage
  231. Description: ARM64 OpenWrt Linux-u-boot
  232. Type: Kernel Image
  233. Compression: lzma compressed
  234. Data Start: 0x890000e8
  235. Data Size: 268847 Bytes = 262.5 KiB
  236. Architecture: AArch64
  237. OS: Linux
  238. Load Address: 0x80200000
  239. Entry Point: 0x80200000
  240. Hash algo: crc32
  241. Hash value: 4015418f
  242. Hash algo: sha1
  243. Hash value: 71a536817d9d1ce634f8c884825d63610063a1ed
  244. Verifying Hash Integrity ... crc32+ sha1+ OK
  245. ## Loading fdt from FIT Image at 89000000 ...
  246. Using 'conf-uboot' configuration
  247. Trying 'fdt-1' fdt subimage
  248. Description: ARM64 OpenWrt gemtek_w1700k-ubi device tree blob
  249. Type: Flat Device Tree
  250. Compression: uncompressed
  251. Data Start: 0x89041c5c
  252. Data Size: 13112 Bytes = 12.8 KiB
  253. Architecture: AArch64
  254. Hash algo: crc32
  255. Hash value: 18c001d7
  256. Hash algo: sha1
  257. Hash value: 0b4ad1bd9084f5441d59ad31d6955d46c35ce856
  258. Verifying Hash Integrity ... crc32+ sha1+ OK
  259. Loading fdt from 0x89041c5c to 0x82000000
  260. Booting using the fdt blob at 0x82000000
  261. Uncompressing Kernel Image ... OK
  262. reserving fdt memory region: addr=80000000 size=200000
  263. Loading Device Tree to 00000000abff9000, end 00000000abfff337 ... OK
  264.  
  265. Starting kernel ...
  266.  
  267.  
  268.  
  269. U-Boot 2026.01-OpenWrt-r34154-35e3ed74fe (Apr 25 2026 - 02:23:42 +0000)
  270.  
  271. CPU: Airoha AN7581
  272. DRAM: 8 GiB (total 2 GiB)
  273. Core: 29 devices, 20 uclasses, devicetree: separate
  274. MMC: mmc@1fa0e000: 0
  275. Loading Environment from MMC... *** Warning - No block device, using default environment
  276.  
  277. Loading Environment from UBI... spi-nand: spi_nand nand@0: Winbond SPI NAND was found.
  278. spi-nand: spi_nand nand@0: 512 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
  279. Read 16384 bytes from volume ubootenv to 00000000ffb30a00
  280. Read 16384 bytes from volume ubootenv2 to 00000000ffb34a40
  281. *** Warning - bad CRC, using default environment
  282.  
  283. In: serial
  284. Out: serial
  285. Err: serial
  286. Net:
  287. Warning: ethernet@1fb50000 (eth0) using random MAC address - b6:a0:06:ae:c1:9e
  288. eth0: ethernet@1fb50000
  289.  
  290. *** U-Boot Boot Menu ***
  291.  
  292. 1. Run default boot command.
  293. 2. Boot system via TFTP.
  294. 3. Boot recovery system from flash.
  295. 4. Boot installer via TFTP.
  296. 5. Reboot.
  297. 0. Exit
  298.  
  299.  
  300. Press UP/DOWN to move, ENTER to select, ESC to quit
  301. LED 'status:red' not found (err=-19)
  302. No size specified -> Using max size (16887808)
  303. Read 16887808 bytes from volume fit to 0000000081800000
  304.  
  305. ## Checking Image at 81800000 ...
  306. FIT image found
  307. FIT description: ARM64 OpenWrt FIT (Flattened Image Tree)
  308. Image 0 (kernel-1)
  309. Description: ARM64 OpenWrt Linux-6.12.85
  310. Type: Kernel Image
  311. Compression: gzip compressed
  312. Data Start: 0x81801000
  313. Data Size: 5564549 Bytes = 5.3 MiB
  314. Architecture: AArch64
  315. OS: Linux
  316. Load Address: 0x80200000
  317. Entry Point: 0x80200000
  318. Hash algo: crc32
  319. Hash value: 764f3b6b
  320. Hash algo: sha1
  321. Hash value: 424ee6d90a0a6af96538bb3d25fc44b300255a78
  322. Image 1 (fdt-1)
  323. Description: ARM64 OpenWrt gemtek_w1700k-ubi device tree blob
  324. Type: Flat Device Tree
  325. Compression: uncompressed
  326. Data Start: 0x81d50000
  327. Data Size: 22096 Bytes = 21.6 KiB
  328. Architecture: AArch64
  329. Hash algo: crc32
  330. Hash value: f784639c
  331. Hash algo: sha1
  332. Hash value: 73b4ea7780e77dfff2d17b182cceebad88262cc2
  333. Image 2 (rootfs-1)
  334. Description: ARM64 OpenWrt gemtek_w1700k-ubi rootfs
  335. Type: Filesystem Image
  336. Compression: uncompressed
  337. Data Start: 0x81d56000
  338. Data Size: 11206656 Bytes = 10.7 MiB
  339. Hash algo: crc32
  340. Hash value: af1dcf4a
  341. Hash algo: sha1
  342. Hash value: c93953aa1e6d90f5ce308cca71f0bad9605c6cca
  343. Default Configuration: 'config-1'
  344. Configuration 0 (config-1)
  345. Description: OpenWrt gemtek_w1700k-ubi
  346. Kernel: kernel-1
  347. FDT: fdt-1
  348. Loadables: rootfs-1
  349. ## Checking hash(es) for FIT Image at 81800000 ...
  350. Hash(es) for Image 0 (kernel-1): crc32+ sha1+
  351. Hash(es) for Image 1 (fdt-1): crc32+ sha1+
  352. Hash(es) for Image 2 (rootfs-1): crc32+ sha1+
  353. ## Loading kernel (any) from FIT Image at 81800000 ...
  354. Using 'config-1' configuration
  355. Trying 'kernel-1' kernel subimage
  356. Description: ARM64 OpenWrt Linux-6.12.85
  357. Type: Kernel Image
  358. Compression: gzip compressed
  359. Data Start: 0x81801000
  360. Data Size: 5564549 Bytes = 5.3 MiB
  361. Architecture: AArch64
  362. OS: Linux
  363. Load Address: 0x80200000
  364. Entry Point: 0x80200000
  365. Hash algo: crc32
  366. Hash value: 764f3b6b
  367. Hash algo: sha1
  368. Hash value: 424ee6d90a0a6af96538bb3d25fc44b300255a78
  369. Verifying Hash Integrity ... crc32+ sha1+ OK
  370. ## Loading fdt (any) from FIT Image at 81800000 ...
  371. Using 'config-1' configuration
  372. Trying 'fdt-1' fdt subimage
  373. Description: ARM64 OpenWrt gemtek_w1700k-ubi device tree blob
  374. Type: Flat Device Tree
  375. Compression: uncompressed
  376. Data Start: 0x81d50000
  377. Data Size: 22096 Bytes = 21.6 KiB
  378. Architecture: AArch64
  379. Hash algo: crc32
  380. Hash value: f784639c
  381. Hash algo: sha1
  382. Hash value: 73b4ea7780e77dfff2d17b182cceebad88262cc2
  383. Verifying Hash Integrity ... crc32+ sha1+ OK
  384. Booting using the fdt blob at 0x81d50000
  385. Working FDT set to 81d50000
  386. ## Loading loadables (any) from FIT Image at 81800000 ...
  387. Trying 'rootfs-1' loadables subimage
  388. Description: ARM64 OpenWrt gemtek_w1700k-ubi rootfs
  389. Type: Filesystem Image
  390. Compression: uncompressed
  391. Data Start: 0x81d56000
  392. Data Size: 11206656 Bytes = 10.7 MiB
  393. Hash algo: crc32
  394. Hash value: af1dcf4a
  395. Hash algo: sha1
  396. Hash value: c93953aa1e6d90f5ce308cca71f0bad9605c6cca
  397. Verifying Hash Integrity ... crc32+ sha1+ OK
  398. Uncompressing Kernel Image to 80200000
  399. Loading Device Tree to 00000000feb30000, end 00000000feb3864f ... OK
  400. Working FDT set to feb30000
  401.  
  402. Starting kernel ...
  403.  
  404. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  405. [ 0.000000] Linux version 6.12.85 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 14.3.0 r34299-deed3f291d) 14.3.0, GNU ld (GNU Binutils) 2.44) #0 SMP Sun May 3 17:18:46 2026
  406. [ 0.000000] Machine model: Gemtek W1700K (OpenWrt U-Boot layout)
  407. [ 0.000000] earlycon: ns16550 at MMIO32 0x000000001fbf0000 (options '115200n8')
  408. [ 0.000000] printk: legacy bootconsole [ns16550] enabled
  409. [ 0.000000] OF: reserved mem: 0x0000000080000000..0x00000000801fffff (2048 KiB) nomap non-reusable atf@80000000
  410. [ 0.000000] OF: reserved mem: 0x0000000084000000..0x00000000849fffff (10240 KiB) nomap non-reusable npu-binary@84000000
  411. [ 0.000000] OF: reserved mem: 0x0000000087000000..0x0000000088ffffff (32768 KiB) nomap non-reusable qdma0-buf@87000000
  412. [ 0.000000] OF: reserved mem: 0x0000000089000000..0x0000000089ffffff (16384 KiB) nomap non-reusable qdma1-buf@89000000
  413. [ 0.000000] OF: reserved mem: 0x000000008a000000..0x000000008cbfffff (45056 KiB) nomap non-reusable npu-pkt@8a000000
  414. [ 0.000000] OF: reserved mem: 0x000000008cc00000..0x0000000090bfffff (65536 KiB) nomap non-reusable npu-txpkt@8cc00000
  415. [ 0.000000] OF: reserved mem: 0x0000000090c00000..0x0000000090c067ff (26 KiB) nomap non-reusable npu-txbufid@90c00000
  416. [ 0.000000] OF: reserved mem: 0x0000000090c06800..0x0000000090e067ff (2048 KiB) nomap non-reusable npu-ba@90c06800
  417. [ 0.000000] Zone ranges:
  418. [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
  419. [ 0.000000] DMA32 empty
  420. [ 0.000000] Normal empty
  421. [ 0.000000] Movable zone start for each node
  422. [ 0.000000] Early memory node ranges
  423. [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000801fffff]
  424. [ 0.000000] node 0: [mem 0x0000000080200000-0x0000000083ffffff]
  425. [ 0.000000] node 0: [mem 0x0000000084000000-0x00000000849fffff]
  426. [ 0.000000] node 0: [mem 0x0000000084a00000-0x0000000086ffffff]
  427. [ 0.000000] node 0: [mem 0x0000000087000000-0x0000000090e05fff]
  428. [ 0.000000] node 0: [mem 0x0000000090e07000-0x00000000ffffffff]
  429. [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
  430. [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
  431. [ 0.000000] psci: probing for conduit method from DT.
  432. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  433. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  434. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  435. [ 0.000000] psci: SMC Calling Convention v1.2
  436. [ 0.000000] percpu: Embedded 20 pages/cpu s42520 r8192 d31208 u81920
  437. [ 0.000000] Detected VIPT I-cache on CPU0
  438. [ 0.000000] CPU features: detected: GIC system register CPU interface
  439. [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration
  440. [ 0.000000] alternatives: applying boot alternatives
  441. [ 0.000000] Kernel command line: console=ttyS0,115200 earlycon ubi.block=0,fit root=/dev/fit0 rootwait
  442. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  443. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  444. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 524287
  445. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  446. [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 2MB
  447. [ 0.000000] software IO TLB: area num 4.
  448. [ 0.000000] software IO TLB: mapped [mem 0x00000000ff6d0000-0x00000000ff8d0000] (2MB)
  449. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  450. [ 0.000000] rcu: Hierarchical RCU implementation.
  451. [ 0.000000] Tracing variant of Tasks RCU enabled.
  452. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  453. [ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
  454. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  455. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  456. [ 0.000000] GICv3: 256 SPIs implemented
  457. [ 0.000000] GICv3: 0 Extended SPIs implemented
  458. [ 0.000000] Root IRQ handler: gic_handle_irq
  459. [ 0.000000] GICv3: GICv3 features: 16 PPIs
  460. [ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=0
  461. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000009080000
  462. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  463. [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
  464. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
  465. [ 0.000000] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
  466. [ 0.008941] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
  467. [ 0.020318] pid_max: default: 32768 minimum: 301
  468. [ 0.028712] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  469. [ 0.036852] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  470. [ 0.048939] rcu: Hierarchical SRCU implementation.
  471. [ 0.054209] rcu: Max phase no-delay instances is 1000.
  472. [ 0.060165] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
  473. [ 0.069383] smp: Bringing up secondary CPUs ...
  474. [ 0.074805] Detected VIPT I-cache on CPU1
  475. [ 0.074877] GICv3: CPU1: found redistributor 1 region 0:0x00000000090a0000
  476. [ 0.074911] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  477. [ 0.075437] Detected VIPT I-cache on CPU2
  478. [ 0.075502] GICv3: CPU2: found redistributor 2 region 0:0x00000000090c0000
  479. [ 0.075529] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  480. [ 0.076043] Detected VIPT I-cache on CPU3
  481. [ 0.076108] GICv3: CPU3: found redistributor 3 region 0:0x00000000090e0000
  482. [ 0.076135] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  483. [ 0.076225] smp: Brought up 1 node, 4 CPUs
  484. [ 0.138057] SMP: Total of 4 processors activated.
  485. [ 0.143218] CPU: All CPU(s) started at EL2
  486. [ 0.147707] CPU features: detected: 32-bit EL0 Support
  487. [ 0.153345] CPU features: detected: CRC32 instructions
  488. [ 0.159028] alternatives: applying system-wide alternatives
  489. [ 0.165291] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
  490. [ 0.175025] Memory: 1864392K/2097148K available (8512K kernel code, 830K rwdata, 2340K rodata, 832K init, 309K bss, 229316K reserved, 0K cma-reserved)
  491. [ 0.194134] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  492. [ 0.204974] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  493. [ 0.212614] 29520 pages in range for non-PLT usage
  494. [ 0.212618] 521040 pages in range for PLT usage
  495. [ 0.219301] pinctrl core: initialized pinctrl subsystem
  496. [ 0.232770] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  497. [ 0.239697] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
  498. [ 0.247500] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  499. [ 0.256047] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  500. [ 0.265017] thermal_sys: Registered thermal governor 'step_wise'
  501. [ 0.265093] ASID allocator initialised with 65536 entries
  502. [ 0.280142] /soc/interrupt-controller@9000000: Fixed dependency cycle(s) with /soc/interrupt-controller@9000000
  503. [ 0.293744] /soc/pcie@1fc00000: Fixed dependency cycle(s) with /soc/pcie@1fc00000/interrupt-controller
  504. [ 0.304193] /soc/pcie@1fc40000: Fixed dependency cycle(s) with /soc/pcie@1fc40000/interrupt-controller
  505. [ 0.330688] clocksource: Switched to clocksource arch_sys_counter
  506. [ 0.340047] NET: Registered PF_INET protocol family
  507. [ 0.345584] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
  508. [ 0.356305] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
  509. [ 0.365718] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  510. [ 0.374239] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
  511. [ 0.383051] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
  512. [ 0.391590] TCP: Hash tables configured (established 16384 bind 16384)
  513. [ 0.399088] MPTCP token hash table entries: 2048 (order: 4, 49152 bytes, linear)
  514. [ 0.407434] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  515. [ 0.414839] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
  516. [ 0.422970] NET: Registered PF_UNIX/PF_LOCAL protocol family
  517. [ 0.429207] PCI: CLS 0 bytes, default 64
  518. [ 0.435079] workingset: timestamp_bits=46 max_order=19 bucket_order=0
  519. [ 0.447954] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  520. [ 0.454384] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  521. [ 0.523003] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  522. [ 0.534250] mtk-pcie-gen3 1fc00000.pcie: host bridge /soc/pcie@1fc00000 ranges:
  523. [ 0.542377] mtk-pcie-gen3 1fc00000.pcie: MEM 0x0020000000..0x0023ffffff -> 0x0020000000
  524. [ 0.660803] mtk-pcie-gen3 1fc00000.pcie: x2 mode enabled
  525. [ 0.666660] mtk-pcie-gen3 1fc00000.pcie: x2 mode: sister MAC mapped
  526. [ 2.880682] mtk-pcie-gen3 1fc00000.pcie: x2: link at Gen2, toggling serdes for Gen3
  527. [ 6.000683] mtk-pcie-gen3 1fc00000.pcie: x2: serdes toggle done, link retraining
  528. [ 6.008801] mtk-pcie-gen3 1fc00000.pcie: x2: init complete, PERST deasserted
  529. [ 6.016931] mtk-pcie-gen3 1fc00000.pcie: PCI host bridge to bus 0000:00
  530. [ 6.024237] pci_bus 0000:00: root bus resource [bus 00-ff]
  531. [ 6.030260] pci_bus 0000:00: root bus resource [mem 0x20000000-0x23ffffff]
  532. [ 6.037875] pci 0000:00:00.0: [14c3:6899] type 01 class 0x060400 PCIe Root Port
  533. [ 6.045917] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x00007fff 64bit]
  534. [ 6.053002] pci 0000:00:00.0: PCI bridge to [bus 00]
  535. [ 6.058455] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
  536. [ 6.065153] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff]
  537. [ 6.072613] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
  538. [ 6.081161] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
  539. [ 6.089205] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  540. [ 6.098214] pci 0000:01:00.0: [14c3:7990] type 00 class 0x028000 PCIe Endpoint
  541. [ 6.106193] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x001fffff 64bit pref]
  542. [ 6.113768] pci 0000:01:00.0: BAR 2 [mem 0x00000000-0x00007fff 64bit]
  543. [ 6.120944] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
  544. [ 6.140735] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  545. [ 6.148034] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff 64bit pref]: assigned
  546. [ 6.157321] pci 0000:00:00.0: bridge window [mem 0x20200000-0x202fffff]: assigned
  547. [ 6.165545] pci 0000:00:00.0: BAR 0 [mem 0x20300000-0x20307fff 64bit]: assigned
  548. [ 6.173588] pci 0000:01:00.0: BAR 0 [mem 0x20000000-0x201fffff 64bit pref]: assigned
  549. [ 6.182105] pci 0000:01:00.0: BAR 2 [mem 0x20200000-0x20207fff 64bit]: assigned
  550. [ 6.190136] pci 0000:00:00.0: PCI bridge to [bus 01]
  551. [ 6.195588] pci 0000:00:00.0: bridge window [mem 0x20200000-0x202fffff]
  552. [ 6.203051] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff 64bit pref]
  553. [ 6.211561] pci_bus 0000:00: resource 4 [mem 0x20000000-0x23ffffff]
  554. [ 6.218445] pci_bus 0000:01: resource 1 [mem 0x20200000-0x202fffff]
  555. [ 6.225334] pci_bus 0000:01: resource 2 [mem 0x20000000-0x201fffff 64bit pref]
  556. [ 6.233451] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  557. [ 6.241730] pcieport 0000:00:00.0: PME: Signaling with IRQ 17
  558. [ 6.248453] pcieport 0000:00:00.0: AER: enabled with IRQ 17
  559. [ 6.255168] mtk-pcie-gen3 1fc40000.pcie: host bridge /soc/pcie@1fc40000 ranges:
  560. [ 6.263265] mtk-pcie-gen3 1fc40000.pcie: MEM 0x0028000000..0x002bffffff -> 0x0028000000
  561. [ 6.710978] mtk-pcie-gen3 1fc40000.pcie: PCI host bridge to bus 0002:00
  562. [ 6.718261] pci_bus 0002:00: root bus resource [bus 00-ff]
  563. [ 6.724310] pci_bus 0002:00: root bus resource [mem 0x28000000-0x2bffffff]
  564. [ 6.731896] pci 0002:00:00.0: [14c3:6899] type 01 class 0x060400 PCIe Root Port
  565. [ 6.739937] pci 0002:00:00.0: BAR 0 [mem 0x00000000-0x00007fff 64bit]
  566. [ 6.747020] pci 0002:00:00.0: PCI bridge to [bus 00]
  567. [ 6.752472] pci 0002:00:00.0: bridge window [io 0x0000-0x0fff]
  568. [ 6.759166] pci 0002:00:00.0: bridge window [mem 0x00000000-0x000fffff]
  569. [ 6.766632] pci 0002:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
  570. [ 6.775182] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
  571. [ 6.783185] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  572. [ 6.792129] pci 0002:01:00.0: [14c3:7991] type 00 class 0x028000 PCIe Endpoint
  573. [ 6.800086] pci 0002:01:00.0: BAR 0 [mem 0x00000000-0x001fffff 64bit pref]
  574. [ 6.807663] pci 0002:01:00.0: BAR 2 [mem 0x00000000-0x00007fff 64bit]
  575. [ 6.814853] pci 0002:01:00.0: PME# supported from D0 D3hot D3cold
  576. [ 6.821592] pci 0002:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0002:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
  577. [ 6.850736] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
  578. [ 6.858034] pci 0002:00:00.0: bridge window [mem 0x28000000-0x281fffff 64bit pref]: assigned
  579. [ 6.867320] pci 0002:00:00.0: bridge window [mem 0x28200000-0x282fffff]: assigned
  580. [ 6.875547] pci 0002:00:00.0: BAR 0 [mem 0x28300000-0x28307fff 64bit]: assigned
  581. [ 6.883587] pci 0002:01:00.0: BAR 0 [mem 0x28000000-0x281fffff 64bit pref]: assigned
  582. [ 6.892105] pci 0002:01:00.0: BAR 2 [mem 0x28200000-0x28207fff 64bit]: assigned
  583. [ 6.900137] pci 0002:00:00.0: PCI bridge to [bus 01]
  584. [ 6.905588] pci 0002:00:00.0: bridge window [mem 0x28200000-0x282fffff]
  585. [ 6.913052] pci 0002:00:00.0: bridge window [mem 0x28000000-0x281fffff 64bit pref]
  586. [ 6.921559] pci_bus 0002:00: resource 4 [mem 0x28000000-0x2bffffff]
  587. [ 6.928436] pci_bus 0002:01: resource 1 [mem 0x28200000-0x282fffff]
  588. [ 6.935326] pci_bus 0002:01: resource 2 [mem 0x28000000-0x281fffff 64bit pref]
  589. [ 6.943410] pcieport 0002:00:00.0: enabling device (0000 -> 0002)
  590. [ 6.951698] pcieport 0002:00:00.0: PME: Signaling with IRQ 20
  591. [ 6.958350] pcieport 0002:00:00.0: AER: enabled with IRQ 20
  592. [ 6.965232] airoha-cpu-pmdomain 1fa20000.cpufreq: ATF SMC not available, using direct PLL programming
  593. [ 6.975417] airoha-cpu-pmdomain 1fa20000.cpufreq: CPU frequency: 1200 MHz
  594. [ 6.983770] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  595. [ 6.993580] printk: legacy console [ttyS0] disabled
  596. [ 6.999232] 1fbf0000.serial: ttyS0 at MMIO 0x1fbf0000 (irq = 21, base_baud = 115200) is a 16550
  597. [ 7.008846] printk: legacy console [ttyS0] enabled
  598. [ 7.008846] printk: legacy console [ttyS0] enabled
  599. [ 7.018916] printk: legacy bootconsole [ns16550] disabled
  600. [ 7.018916] printk: legacy bootconsole [ns16550] disabled
  601. [ 7.031261] 1fbf0300.serial: ttyS1 at MMIO 0x1fbf0300 (irq = 22, base_baud = 460800) is a Airoha 16550
  602. [ 7.041661] 1fbe1000.serial: ttyS2 at MMIO 0x1fbe1000 (irq = 23, base_baud = 460800) is a Airoha 16550
  603. [ 7.052386] random: crng init done
  604. [ 7.057191] spi-nand spi0.0: Winbond SPI NAND was found.
  605. [ 7.062576] spi-nand spi0.0: 512 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
  606. [ 7.071099] 4 fixed-partitions partitions found on MTD device spi0.0
  607. [ 7.077681] Creating 4 MTD partitions on "spi0.0":
  608. [ 7.082497] 0x000000000000-0x000000600000 : "vendor"
  609. [ 7.099970] 0x000000600000-0x000000700000 : "chainloader"
  610. [ 7.108018] 0x000000700000-0x00001be00000 : "ubi"
  611. [ 7.991593] ubi0: attaching mtd2
  612. [ 9.691809] ubi0: scanning is finished
  613. [ 9.705123] ubi0: attached mtd2 (name "ubi", size 439 MiB)
  614. [ 9.710625] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  615. [ 9.717522] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  616. [ 9.724321] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  617. [ 9.731288] ubi0: good PEBs: 3512, bad PEBs: 0, corrupted PEBs: 0
  618. [ 9.737376] ubi0: user volume: 6, internal volumes: 1, max. volumes count: 128
  619. [ 9.744596] ubi0: max/mean erase counter: 7/4, WL threshold: 4096, image sequence number: 910861646
  620. [ 9.753641] ubi0: available PEBs: 0, total reserved PEBs: 3512, PEBs reserved for bad PEB handling: 80
  621. [ 9.762959] ubi0: background thread "ubi_bgt0d" started, PID 256
  622. [ 9.764193] block ubiblock0_4: created from ubi0:4(fit)
  623. [ 9.774361] 0x00001be00000-0x000020000000 : "reserved_bmt"
  624. [ 9.928825] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  625. [ 9.935712] NET: Registered PF_INET6 protocol family
  626. [ 9.941636] Segment Routing with IPv6
  627. [ 9.945334] In-situ OAM (IOAM) with IPv6
  628. [ 9.949303] NET: Registered PF_PACKET protocol family
  629. [ 9.954415] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  630. [ 9.967716] 8021q: 802.1Q VLAN Support v1.8
  631. [ 9.985189] FIT: Detected U-Boot 2026.01-OpenWrt-r34154-35e3ed74fe
  632. [ 9.991419] FIT: Selected configuration: "config-1" (OpenWrt gemtek_w1700k-ubi)
  633. [ 9.998745] FIT: kernel sub-image 0x00001000..0x0054f884 "kernel-1" (ARM64 OpenWrt Linux-6.12.85)
  634. [ 10.008606] FIT: flat_dt sub-image 0x00550000..0x0055564f "fdt-1" (ARM64 OpenWrt gemtek_w1700k-ubi device tree blob)
  635. [ 10.020017] FIT: filesystem sub-image 0x00556000..0x01005fff "rootfs-1" (ARM64 OpenWrt gemtek_w1700k-ubi rootfs)
  636. [ 10.031306] block ubiblock0_4: mapped 1 uImage.FIT filesystem sub-image as /dev/fit0
  637. [ 10.039372] clk: Disabling unused clocks
  638. [ 10.043397] PM: genpd: Disabling unused power domains
  639. [ 10.053575] VFS: Mounted root (squashfs filesystem) readonly on device 259:0.
  640. [ 10.060990] Freeing unused kernel memory: 832K
  641. [ 10.065475] Run /sbin/init as init process
  642. [ 10.323837] init: Console is alive
  643. [ 10.327378] init: - watchdog -
  644. [ 10.756628] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  645. [ 10.792038] gpio_button_hotplug: loading out-of-tree module taints kernel.
  646. [ 11.070833] airoha-npu 1e900000.npu: NPU fw version: 0.1111
  647. [ 12.432906] mt7530-mmio 1fb58000.switch: configuring for fixed/internal link mode
  648. [ 12.440651] mt7530-mmio 1fb58000.switch lan3 (uninitialized): PHY [mt7530_dsa-0:09] driver [Airoha AN7581 PHY] (irq=51)
  649. [ 12.452820] mt7530-mmio 1fb58000.switch lan4 (uninitialized): PHY [mt7530_dsa-0:0a] driver [Airoha AN7581 PHY] (irq=52)
  650. [ 12.464843] airoha_eth 1fb50000.ethernet eth0: entered promiscuous mode
  651. [ 12.471610] DSA: tree 0 setup
  652. [ 12.474595] mt7530-nl: genl_register_family_with_ops
  653. [ 12.480434] mt7530-mmio 1fb58000.switch: Link is Up - 10Gbps/Full - flow control rx/tx
  654. [ 12.505871] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  655. [ 12.513809] init: - preinit -
  656. [ 12.926729] airoha_eth 1fb50000.ethernet wan: renamed from eth1
  657. [ 12.937158] airoha_eth 1fb50000.ethernet lan2: renamed from eth2
  658. Cannot parse config file '/etc/fw_env.config': No such file or directory
  659. Failed to find NVMEM device
  660. [ 13.470734] Realtek RTL8261N mt7530_dsa-0:05: rtkphy_config_init:80 [RTL8261N/RTL8264/RTL826XB] phy_id: 0x1CCAF3 PHYAD:5
  661. [ 13.768575] airoha_eth 1fb50000.ethernet lan2: PHY [mt7530_dsa-0:05] driver [Realtek RTL8261N] (irq=POLL)
  662. [ 13.778187] airoha_eth 1fb50000.ethernet lan2: configuring for phy/usxgmii link mode
  663. Press the [f] key and hit [enter] to enter failsafe mode
  664. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  665. [ 18.145995] UBIFS (ubi0:5): Mounting in unauthenticated mode
  666. [ 18.151885] UBIFS (ubi0:5): background thread "ubifs_bgt0_5" started, PID 919
  667. [ 18.230655] UBIFS (ubi0:5): UBIFS: mounted UBI device 0, volume 5, name "rootfs_data"
  668. [ 18.238524] UBIFS (ubi0:5): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  669. [ 18.248460] UBIFS (ubi0:5): FS size: 402132992 bytes (383 MiB, 3167 LEBs), max 3182 LEBs, journal size 20189184 bytes (19 MiB, 159 LEBs)
  670. [ 18.260727] UBIFS (ubi0:5): reserved for root: 4952683 bytes (4836 KiB)
  671. [ 18.267342] UBIFS (ubi0:5): media format: w5/r0 (latest is w5/r0), UUID C87FF8EB-FE74-4774-BD5B-AF66C09C0AC3, small LPT model
  672. [ 18.279707] mount_root: overlay filesystem has not been fully initialized yet
  673. [ 18.287810] mount_root: switching to ubifs overlay
  674. [ 18.299826] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
  675. - config restore -
  676. [ 18.511599] urandom-seed: Seed file not found (/etc/urandom.seed)
  677. [ 18.808186] procd: - early -
  678. [ 18.811301] procd: - watchdog -
  679. [ 19.374521] procd: - watchdog -
  680. [ 19.378026] procd: - ubus -
  681. [ 19.465996] procd: - init -
  682. Please press Enter to activate this console.
  683. [ 19.798572] kmodloader: loading kernel modules from /etc/modules.d/*
  684. [ 19.814630] i2c_dev: i2c /dev entries driver
  685. [ 19.820813] i2c-mt7621 1fbf8000.i2c0: clock 100 kHz
  686. [ 19.832320] Bridge firewalling registered
  687. [ 19.837257] Loading modules backported from Linux version v6.18.26-0-g1fe060681
  688. [ 19.844633] Backport generated by backports.git 6ecbb44
  689. [ 19.867890] xt_time: kernel timezone is -0000
  690. [ 19.972703] mt7996e_hif 0002:01:00.0: enabling device (0000 -> 0002)
  691. [ 19.979303] mt7996e 0000:01:00.0: enabling device (0000 -> 0002)
  692. [ 20.064268] urngd: v1.0.2 started.
  693. [ 20.141224] mt7996e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20260311120419a
  694. [ 20.141224]
  695. [ 20.491735] mt7996e 0000:01:00.0: WM Firmware Version: ____000000, Build Time: 20260311120504
  696. [ 20.531564] mt7996e 0000:01:00.0: DSP Firmware Version: ____000000, Build Time: 20260311120415
  697. [ 20.614982] mt7996e 0000:01:00.0: WA Firmware Version: ____000000, Build Time: 20260311120325
  698. [ 21.064082] mt7996e 0000:01:00.0: NPU version: 0.1111
  699. [ 21.129728] PPP generic driver version 2.4.2
  700. [ 21.135619] NET: Registered PF_PPPOX protocol family
  701. [ 21.145081] kmodloader: done loading kernel modules from /etc/modules.d/*
  702. [ 25.780779] Realtek RTL8261N mt7530_dsa-0:05: rtkphy_config_init:80 [RTL8261N/RTL8264/RTL826XB] phy_id: 0x1CCAF3 PHYAD:5
  703. [ 26.074186] airoha_eth 1fb50000.ethernet lan2: PHY [mt7530_dsa-0:05] driver [Realtek RTL8261N] (irq=POLL)
  704. [ 26.083848] airoha_eth 1fb50000.ethernet lan2: configuring for phy/usxgmii link mode
  705. [ 26.107456] br-lan: port 1(lan2) entered blocking state
  706. [ 26.112802] br-lan: port 1(lan2) entered disabled state
  707. [ 26.118079] airoha_eth 1fb50000.ethernet lan2: entered allmulticast mode
  708. [ 26.125081] airoha_eth 1fb50000.ethernet lan2: entered promiscuous mode
  709. [ 26.146575] mt7530-mmio 1fb58000.switch lan3: configuring for phy/internal link mode
  710. [ 26.155514] br-lan: port 2(lan3) entered blocking state
  711. [ 26.160825] br-lan: port 2(lan3) entered disabled state
  712. [ 26.166113] mt7530-mmio 1fb58000.switch lan3: entered allmulticast mode
  713. [ 26.172840] airoha_eth 1fb50000.ethernet eth0: entered allmulticast mode
  714. [ 26.179882] mt7530-mmio 1fb58000.switch lan3: entered promiscuous mode
  715. [ 26.190965] mt7530-mmio 1fb58000.switch lan4: configuring for phy/internal link mode
  716. [ 26.199847] br-lan: port 3(lan4) entered blocking state
  717. [ 26.205220] br-lan: port 3(lan4) entered disabled state
  718. [ 26.210499] mt7530-mmio 1fb58000.switch lan4: entered allmulticast mode
  719. [ 26.217494] mt7530-mmio 1fb58000.switch lan4: entered promiscuous mode
  720. [ 26.233895] Realtek RTL8261N mt7530_dsa-0:08: rtkphy_config_init:80 [RTL8261N/RTL8264/RTL826XB] phy_id: 0x1CCAF3 PHYAD:8
  721. [ 26.581679] airoha_eth 1fb50000.ethernet wan: PHY [mt7530_dsa-0:08] driver [Realtek RTL8261N] (irq=POLL)
  722. [ 26.591277] airoha_eth 1fb50000.ethernet wan: configuring for phy/usxgmii link mode
  723. [ 30.802741] airoha_eth 1fb50000.ethernet wan: Link is Up - 10Gbps/Full - flow control off
  724. [ 31.282599] airoha_eth 1fb50000.ethernet lan2: Link is Up - 10Gbps/Full - flow control rx/tx
  725. [ 31.290768] br-lan: port 1(lan2) entered blocking state
  726. [ 31.296279] br-lan: port 1(lan2) entered forwarding state
  727. [ 39.326501] br-lan: port 4(phy0.0-ap0) entered blocking state
  728. [ 39.332350] br-lan: port 4(phy0.0-ap0) entered disabled state
  729. [ 39.338159] mt7996e 0000:01:00.0 phy0.0-ap0: entered allmulticast mode
  730. [ 39.345078] mt7996e 0000:01:00.0 phy0.0-ap0: entered promiscuous mode
  731. [ 39.735329] br-lan: port 4(phy0.0-ap0) entered blocking state
  732. [ 39.741158] br-lan: port 4(phy0.0-ap0) entered forwarding state
  733. [ 40.381152] br-lan: port 5(phy0.1-ap0) entered blocking state
  734. [ 40.386934] br-lan: port 5(phy0.1-ap0) entered disabled state
  735. [ 40.392855] mt7996e 0000:01:00.0 phy0.1-ap0: entered allmulticast mode
  736. [ 40.399778] mt7996e 0000:01:00.0 phy0.1-ap0: entered promiscuous mode
  737. [ 40.416507] br-lan: port 5(phy0.1-ap0) entered blocking state
  738. [ 40.422315] br-lan: port 5(phy0.1-ap0) entered forwarding state
  739. [ 40.429676] br-lan: port 5(phy0.1-ap0) entered disabled state
  740. [ 40.659760] br-lan: port 6(phy0.2-ap0) entered blocking state
  741. [ 40.665628] br-lan: port 6(phy0.2-ap0) entered disabled state
  742. [ 40.671495] mt7996e 0000:01:00.0 phy0.2-ap0: entered allmulticast mode
  743. [ 40.678357] mt7996e 0000:01:00.0 phy0.2-ap0: entered promiscuous mode
  744. [ 40.696442] br-lan: port 6(phy0.2-ap0) entered blocking state
  745. [ 40.702253] br-lan: port 6(phy0.2-ap0) entered forwarding state
  746. [ 40.715197] br-lan: port 6(phy0.2-ap0) entered disabled state
  747. [ 57.460884] br-lan: port 6(phy0.2-ap0) entered blocking state
  748. [ 57.466673] br-lan: port 6(phy0.2-ap0) entered forwarding state
  749. [ 106.400582] br-lan: port 5(phy0.1-ap0) entered blocking state
  750. [ 106.406373] br-lan: port 5(phy0.1-ap0) entered forwarding state
  751.  
  752.  
  753.  
  754.  
  755.  
  756.  
  757.  
  758.  
  759.  
  760.  
  761.  
  762.  
  763.  
  764.  
  765.  
  766.  
  767.  
  768.