Data hosted with ♥ by Pastebin.com - Download Raw - See Original
  1. ##
  2. ## bitcoinx.conf configuration file. Lines beginning with # are comments.
  3. ##
  4.  
  5. # Network-related settings:
  6.  
  7. # Run on the test network instead of the real bitcoinx network.
  8. #testnet=0
  9.  
  10. # Run a regression test network
  11. #regtest=0
  12.  
  13. # Connect via a SOCKS5 proxy
  14. #proxy=127.0.0.1:9050
  15.  
  16. # Bind to given address and always listen on it. Use [host]:port notation for IPv6
  17. #bind=<addr>
  18.  
  19. # Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6
  20. #whitebind=<addr>
  21.  
  22. ##############################################################
  23. ## Quick Primer on addnode vs connect ##
  24. ## Let's say for instance you use addnode=4.2.2.4 ##
  25. ## addnode will connect you to and tell you about the ##
  26. ## nodes connected to 4.2.2.4. In addition it will tell ##
  27. ## the other nodes connected to it that you exist so ##
  28. ## they can connect to you. ##
  29. ## connect will not do the above when you 'connect' to it. ##
  30. ## It will *only* connect you to 4.2.2.4 and no one else.##
  31. ## ##
  32. ## So if you're behind a firewall, or have other problems ##
  33. ## finding nodes, add some using 'addnode'. ##
  34. ## ##
  35. ## If you want to stay private, use 'connect' to only ##
  36. ## connect to "trusted" nodes. ##
  37. ## ##
  38. ## If you run multiple nodes on a LAN, there's no need for ##
  39. ## all of them to open lots of connections. Instead ##
  40. ## 'connect' them all to one node that is port forwarded ##
  41. ## and has lots of connections. ##
  42. ## Thanks goes to [Noodle] on Freenode. ##
  43. ##############################################################
  44.  
  45. # Use as many addnode= settings as you like to connect to specific peers
  46. #addnode=69.164.218.197
  47. #addnode=10.0.0.2:9003
  48.  
  49. # Alternatively use as many connect= settings as you like to connect ONLY to specific peers
  50. #connect=69.164.218.197
  51. #connect=10.0.0.1:9003
  52.  
  53. # Listening mode, enabled by default except when 'connect' is being used
  54. listen=1
  55.  
  56. # Maximum number of inbound+outbound connections.
  57. #maxconnections=
  58.  
  59. #
  60. # JSON-RPC options (for controlling a running Bitcoin/bitcoinxd process)
  61. #
  62.  
  63. server=1
  64. #tells BitcoinX-Qt and bitcoinxd to accept JSON-RPC commands
  65. #server=0
  66.  
  67. # Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6.
  68. # This option can be specified multiple times (default: bind to all interfaces)
  69. #rpcbind=<addr>
  70.  
  71. # If no rpcpassword is set, rpc cookie auth is sought. The default `-rpccookiefile` name
  72. # is .cookie and found in the `-datadir` being used for bitcoinxd. This option is typically used
  73. # when the server and client are run as the same user.
  74. #
  75. # If not, you must set rpcuser and rpcpassword to secure the JSON-RPC api. The first
  76. # method(DEPRECATED) is to set this pair for the server and client:
  77. rpcuser=Ulysseys
  78. rpcpassword=password
  79. #
  80. # The second method `rpcauth` can be added to server startup argument. It is set at intialization time
  81. # using the output from the script in share/rpcuser/rpcuser.py after providing a username:
  82. #
  83. # ./share/rpcuser/rpcuser.py alice
  84. # String to be appended to bitcoinx.conf:
  85. # rpcauth=alice:f7efda5c189b999524f151318c0c86$d5b51b3beffbc02b724e5d095828e0bc8b2456e9ac8757ae3211a5d9b16a22ae
  86. # Your password:
  87. # DONT_USE_THIS_YOU_WILL_GET_ROBBED_8ak1gI25KFTvjovL3gAM967mies3E=
  88. #
  89. # On client-side, you add the normal user/password pair to send commands:
  90. #rpcuser=alice
  91. #rpcpassword=DONT_USE_THIS_YOU_WILL_GET_ROBBED_8ak1gI25KFTvjovL3gAM967mies3E=
  92. #
  93. # You can even add multiple entries of these to the server conf file, and client can use any of them:
  94. # rpcauth=bob:b2dd077cb54591a2f3139e69a897ac$4e71f08d48b4347cf8eff3815c0e25ae2e9a4340474079f55705f40574f4ec99
  95.  
  96. # How many seconds bitcoinx will wait for a complete RPC HTTP request.
  97. # after the HTTP connection is established.
  98. #rpcclienttimeout=30
  99.  
  100. # By default, only RPC connections from localhost are allowed.
  101. # Specify as many rpcallowip= settings as you like to allow connections from other hosts,
  102. # either as a single IPv4/IPv6 or with a subnet specification.
  103.  
  104. # NOTE: opening up the RPC port to hosts outside your local trusted network is NOT RECOMMENDED,
  105. # because the rpcpassword is transmitted over the network unencrypted.
  106.  
  107. server=1
  108. # tells Bitcoinx-Qt to accept JSON-RPC commands.
  109. # it is also read by bitcoinxd to determine if RPC should be enabled
  110. #rpcallowip=10.1.1.34/255.255.255.0
  111. rpcallowip=192.168.0.24
  112. #rpcallowip=2001:db8:85a3:0:0:8a2e:370:7334/96
  113.  
  114. # Listen for RPC connections on this TCP port:
  115. rpcport=9333
  116. port=3333
  117.  
  118. # You can use Bitcoin or bitcoinxd to send commands to Bitcoin/bitcoinxd
  119. # running on another host using this option:
  120. #rpcconnect=127.0.0.1
  121.  
  122.  
  123. # Create transactions that have enough fees so they are likely to begin confirmation within n blocks (default: 6).
  124. # This setting is over-ridden by the -paytxfee option.
  125. #txconfirmtarget=n
  126.  
  127. # Miscellaneous options
  128.  
  129. # Pre-generate this many public/private key pairs, so wallet backups will be valid for
  130. # both prior transactions and several dozen future transactions.
  131. #keypool=100
  132.  
  133. # Pay an optional transaction fee every time you send bitcoins. Transactions with fees
  134. # are more likely than free transactions to be included in generated blocks, so may
  135. # be validated sooner.
  136. #paytxfee=0.00
  137.  
  138. # Enable pruning to reduce storage requirements by deleting old blocks.
  139. # This mode is incompatible with -txindex and -rescan.
  140. # 0 = default (no pruning).
  141. # 1 = allows manual pruning via RPC.
  142. # >=550 = target to stay under in MiB.
  143. #prune=550
  144.  
  145. # User interface options
  146.  
  147. # Start Bitcoinx minimized
  148. #min=1
  149. gen=1
  150.  
  151. # Minimize to the system tray
  152. #minimizetotray=1