Guest User

Untitled

a guest
Mar 8th, 2017
61
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. U-Boot SPL 2016.11-rc3-00002-g73df7f7 (Nov 04 2016 - 15:20:36)
  2. Trying to boot from MMC2
  3.  
  4.  
  5. U-Boot 2016.11-rc3-00002-g73df7f7 (Nov 04 2016 - 15:20:36 -0500), Build: jenkins-github_Bootloader-Builder-479
  6.  
  7. CPU : AM335X-GP rev 2.1
  8. I2C: ready
  9. DRAM: 512 MiB
  10. Reset Source: Power-on reset has occurred.
  11. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
  12. Using default environment
  13.  
  14. Board: BeagleBone Black
  15. Model: BeagleBone Black Wireless
  16. <ethaddr> not set. Validating first E-fuse MAC
  17. Net: eth0: MII MODE
  18. Could not get PHY for cpsw: addr 0
  19. cpsw
  20. Press SPACE to abort autoboot in 2 seconds
  21. board_name=[BBBW] ...
  22. switch to partitions #0, OK
  23. mmc0 is current device
  24. SD/MMC found on device 0
  25. ** Bad device 0:2 0x82000000 **
  26. ** Bad device 0:2 0x82000000 **
  27. switch to partitions #0, OK
  28. mmc0 is current device
  29. Scanning mmc 0:1...
  30. gpio: pin 56 (gpio 56) value is 0
  31. gpio: pin 55 (gpio 55) value is 0
  32. gpio: pin 54 (gpio 54) value is 0
  33. gpio: pin 53 (gpio 53) value is 1
  34. switch to partitions #0, OK
  35. mmc0 is current device
  36. gpio: pin 54 (gpio 54) value is 1
  37. Checking for: /uEnv.txt ...
  38. 1302 bytes read in 12 ms (105.5 KiB/s)
  39. gpio: pin 55 (gpio 55) value is 1
  40. Loaded environment from /uEnv.txt
  41. Importing environment from mmc ...
  42. Checking if uenvcmd is set ...
  43. gpio: pin 56 (gpio 56) value is 1
  44. Running uenvcmd ...
  45. 2040 bytes read in 69 ms (28.3 KiB/s)
  46. debug: [/boot/vmlinuz-4.4.52-ti-r91] ...
  47. 8651800 bytes read in 612 ms (13.5 MiB/s)
  48. debug: [/boot/initrd.img-4.4.52-ti-r91] ...
  49. 5315954 bytes read in 395 ms (12.8 MiB/s)
  50. debug: [/boot/dtbs/4.4.52-ti-r91/am335x-boneblack-wireless.dtb] ...
  51. 59486 bytes read in 203 ms (286.1 KiB/s)
  52. debug: [console=tty0 console=ttyO0,115200n8 root=/dev/mmcblk0p1 rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet cape_universal=enable] ...
  53. debug: [bootz 0x82000000 0x88080000:511d72 0x88000000] ...
  54. ## Flattened Device Tree blob at 88000000
  55. Booting using the fdt blob at 0x88000000
  56. Using Device Tree in place at 88000000, end 8801185d
  57.  
  58. Starting kernel ...
  59.  
  60. [ 0.001076] clocksource_probe: no matching clocksources found
  61. [ 2.086123] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
  62. [ 2.323551] omap_voltage_late_init: Voltage driver support not added
  63. [ 2.331491] PM: Cannot get wkup_m3_ipc handle
  64. Loading, please wait...
  65. [ 5.005472] remoteproc1: failed to load am335x-pru0-fw
  66. [ 5.039915] remoteproc1: request_firmware failed: -2
  67. [ 5.045139] pru-rproc 4a334000.pru0: rproc_boot failed
  68. [ 5.178493] remoteproc1: failed to load am335x-pru1-fw
  69. [ 5.186829] remoteproc1: request_firmware failed: -2
  70. [ 5.192015] pru-rproc 4a338000.pru1: rproc_boot failed
  71. rootfs: recovering journal
  72. rootfs: clean, 83945/217728 files, 422093/869376 blocks
  73.  
  74. Debian GNU/Linux 8 beaglebone ttyS0
  75.  
  76. BeagleBoard.org Debian Image 2017-03-07
  77.  
  78. Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian
  79.  
  80. default username:password is [debian:temppwd]
  81.  
  82. beaglebone login:
RAW Paste Data