Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Hi,
- I've tried a few options and I still can't get it to work.
- U-boot, denx master with the kloadaddr patch:
- [koen@Angstrom-F16-vm-rpm u-boot-denx]$ git log --oneline -10
- f260a85 am335x-evm config: avoid moving uImage in memory during boot
- c7c6322 Prepare v2012.10-rc3
- dec9668 arm: armv7: omap3: Fix restore sequence in lowlevel_init
- 8cc64ba yaffs2: Fix GCC 4.6 compile warnings
- d1efb64 disk: part_dos: don't claim whole-disk FAT filesystems
- bd1a7e3 FAT: check for partition 0 not 1 for whole-disk fs
- 03eecab arm: rmobile: bugfix: wrong register saving in lowlevel_init
- 8a10180 ide: Correct IDE_BUS(dev) macro
- 633efe9 GPIO: pca953x: fix error reporting
- d75bc03 GPIO: pca953x: fix spelling in help
- U-Boot SPL 2012.10-rc3-00001-gf260a85 (Oct 12 2012 - 21:44:47)
- OMAP SD/MMC: 0
- reading u-boot.img
- reading u-boot.img
- U-Boot 2012.10-rc3-00001-gf260a85 (Oct 12 2012 - 21:44:47)
- I2C: ready
- DRAM: 256 MiB
- WARNING: Caches not enabled
- MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
- Using default environment
- Net: cpsw
- Hit any key to stop autoboot: 0
- SD/MMC found on device 0
- reading uEnv.txt
- 226 bytes read
- Loaded environment from uEnv.txt
- Importing environment from mmc ...
- Running uenvcmd ...
- Loading file "/boot/uImage" from mmc device 0:2
- 3862384 bytes read
- Loading file "/boot/am335x-bone.dtb" from mmc device 0:2
- 6875 bytes read
- ## Booting kernel from Legacy Image at 80007fc0 ...
- Image Name: Linux-3.6.0
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 3862320 Bytes = 3.7 MiB
- Load Address: 80008000
- Entry Point: 80008000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 80f80000
- Booting using the fdt blob at 0x80f80000
- XIP Kernel Image ... OK
- OK
- Loading Device Tree to 8fe65000, end 8fe69ada ... OK
- uEnv.txt:
- root@bone-mainline:~# cat /media/card/uEnv.txt
- devtree=/boot/am335x-bone.dtb
- dtboot=run mmcargs; ext2load mmc ${mmcdev}:2 ${kloadaddr} ${bootfile} ; ext2load mmc ${mmcdev}:2 ${fdtaddr} ${devtree} ; bootm ${kloadaddr} - ${fdtaddr}
- uenvcmd=run dtboot
- optargs=consoleblank=0
- Kernel, matts edma branch, no changes:
- [koen@Angstrom-F16-vm-rpm kernel]$ git log --oneline -5
- 8cbf874 ARM: configs: working am335x edma dmaengine defconfig
- e8d7b8b ARM: dts: add BeagleBone Adafruit 1.8 LCD support
- 8484c7e ARM: dts: add AM33XX SPI support
- 3c9440f spi: omap2-mcspi: add generic DMA request support to the DT binding
- 3bb67d1 spi: omap2-mcspi: convert to dma_request_slave_channel_compat()
- 'make omap2plus_defconfig':
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Linux version 3.6.0 (koen@Angstrom-F16-vm-rpm) (gcc version 4.5.4 20120305 (prerelease) (GCC) ) #200 SMP Sat Oct 13 11:27:38 CEST 2012
- [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] AM335X ES1.0 (neon )
- [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0f05000 s12928 r8192 d15744 u36864
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
- [ 0.000000] Kernel command line: console=ttyO0,115200n8 consoleblank=0 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait
- [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Memory: 255MB = 255MB total
- [ 0.000000] Memory: 245480k/245480k available, 16664k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc06c0ffc (6884 kB)
- [ 0.000000] .init : 0xc06c1000 - 0xc0712280 ( 325 kB)
- [ 0.000000] .data : 0xc0714000 - 0xc07a0440 ( 562 kB)
- [ 0.000000] .bss : 0xc07a0464 - 0xc0cfc3ec (5488 kB)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
- [ 0.000000] Total of 128 interrupts on 1 active controller
- [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
- [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
- [ 0.000000] ... MAX_LOCK_DEPTH: 48
- [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
- [ 0.000000] ... CLASSHASH_SIZE: 4096
- [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
- [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
- [ 0.000000] ... CHAINHASH_SIZE: 16384
- [ 0.000000] memory used by lock dependency info: 3695 kB
- [ 0.000000] per task-struct memory footprint: 1152 bytes
- [ 0.001097] Calibrating delay loop... 364.48 BogoMIPS (lpj=1425408)
- [ 0.107579] pid_max: default: 32768 minimum: 301
- [ 0.108233] Security Framework initialized
- [ 0.108433] Mount-cache hash table entries: 512
- [ 0.120356] CPU: Testing write buffer coherency: ok
- [ 0.121412] CPU0: thread -1, cpu 0, socket -1, mpidr 0
- [ 0.121506] Setting up static identity map for 0x804d7048 - 0x804d70b8
- [ 0.124684] Brought up 1 CPUs
- [ 0.124717] SMP: Total of 1 processors activated (364.48 BogoMIPS).
- [ 0.128405] devtmpfs: initialized
- [ 0.150575] pinctrl core: initialized pinctrl subsystem
- [ 0.158019] regulator-dummy: no parameters
- [ 0.160449] NET: Registered protocol family 16
- [ 0.161367] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.186898] platform 49000000.edma: alias fck already exists
- [ 0.186945] platform 49000000.edma: alias fck already exists
- [ 0.186974] platform 49000000.edma: alias fck already exists
- [ 0.192936] OMAP GPIO hardware version 0.1
- [ 0.210951] No ATAGs?
- [ 0.210978] hw-breakpoint: debug architecture 0x4 unsupported.
- [ 0.213010] edma: probe of 49000000.edma failed with error -16
- [ 0.302832] bio: create slab <bio-0> at 0
- [ 0.308064] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
- [ 0.308135] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
- [ 0.413963] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
- [ 0.423503] SCSI subsystem initialized
- [ 0.426483] usbcore: registered new interface driver usbfs
- [ 0.427146] usbcore: registered new interface driver hub
- [ 0.428712] usbcore: registered new device driver usb
- [ 0.446556] omap_i2c 44e0b000.i2c: bus 0 rev2.4.0 at 400 kHz
- [ 0.454319] DCDC1: at 1800 mV
- [ 0.457254] vdd_mpu: 925 <--> 1325 mV at 1275 mV
- [ 0.460299] vdd_core: 925 <--> 1150 mV at 1100 mV
- [ 0.463003] LDO1: at 1800 mV
- [ 0.465622] LDO2: at 3300 mV
- [ 0.468773] LDO3: 1800 <--> 3300 mV at 3300 mV
- [ 0.471493] LDO4: at 3300 mV
- [ 0.473712] tps65217 0-0024: TPS65217 ID 0x7 version 1.0
- [ 0.483443] Switching to clocksource gp_timer
- [ 0.652441] NET: Registered protocol family 2
- [ 0.654871] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.655371] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
- [ 0.660736] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.661054] TCP: reno registered
- [ 0.661099] UDP hash table entries: 256 (order: 2, 20480 bytes)
- [ 0.661445] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
- [ 0.662499] NET: Registered protocol family 1
- [ 0.664362] RPC: Registered named UNIX socket transport module.
- [ 0.664394] RPC: Registered udp transport module.
- [ 0.664410] RPC: Registered tcp transport module.
- [ 0.664426] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.665782] NetWinder Floating Point Emulator V0.97 (double precision)
- [ 0.666371] CPU PMU: probing PMU on CPU 0
- [ 0.666570] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
- [ 0.871784] VFS: Disk quotas dquot_6.5.2
- [ 0.872089] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.875602] NFS: Registering the id_resolver key type
- [ 0.876162] Key type id_resolver registered
- [ 0.876190] Key type id_legacy registered
- [ 0.876373] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- [ 0.879282] msgmni has been set to 479
- [ 0.883852] io scheduler noop registered
- [ 0.883882] io scheduler deadline registered
- [ 0.884007] io scheduler cfq registered (default)
- [ 0.887549] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
- [ 0.892875] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.901597] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
- [ 0.902187] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
- [ 1.553483] console [ttyO0] enabled
- [ 1.601592] brd: module loaded
- [ 1.631258] loop: module loaded
- [ 1.642581] mtdoops: mtd device (mtddev=name/number) must be supplied
- [ 1.650573] OneNAND driver initializing
- [ 61.671439] INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=7682 jiffies)
- [ 61.680491] INFO: Stall ended before state dump start
- [ 241.710423] INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=30727 jiffies)
- [ 241.719540] INFO: Stall ended before state dump start
- So it's not a .config problem or a problem with the extra patches since the failure mode is the same between my evil tree + config and matts tree + omap2plus_config. When you get back to work next week, could you try loading the uimage and dtb from mmc and using mmc as rootfs? I'll try to tftpboot later to see if that makes a difference. And a new toolchain.
- thanks,
- Koen
Add Comment
Please, Sign In to add comment