Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ct 19 12:38:45 sazcom NetworkManager[897]: <info> [1508405925.6137] manager: WiFi hardware radio set enabled
- Oct 19 12:38:45 sazcom kernel: iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
- Oct 19 12:38:45 sazcom kernel: iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
- Oct 19 12:38:45 sazcom systemd[1]: Starting Load/Save RF Kill Switch Status...
- Oct 19 12:38:45 sazcom systemd[1]: Started Load/Save RF Kill Switch Status.
- Oct 19 12:38:45 sazcom kernel: iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
- Oct 19 12:38:45 sazcom kernel: iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
- Oct 19 12:38:45 sazcom NetworkManager[897]: <info> [1508405925.7132] audit: op="radio-control" arg="wireless-enabled:1" pid=1514 uid=1000 result="success"
- Oct 19 12:38:45 sazcom NetworkManager[897]: <info> [1508405925.7142] manager: WiFi now enabled by radio killswitch
- Oct 19 12:38:45 sazcom kernel: IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
- Oct 19 12:38:45 sazcom wpa_supplicant[1000]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
- Oct 19 12:38:45 sazcom wpa_supplicant[1000]: dbus: Failed to construct signal
- Oct 19 12:38:45 sazcom wpa_supplicant[1000]: Could not read interface p2p-dev-wlp1s0 flags: No such device
- Oct 19 12:38:45 sazcom NetworkManager[897]: <info> [1508405925.7911] device (wlp1s0): supplicant interface state: starting -> ready
- Oct 19 12:38:45 sazcom NetworkManager[897]: <info> [1508405925.7912] device (wlp1s0): state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42]
- Oct 19 12:38:45 sazcom kernel: IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
- Oct 19 12:38:48 sazcom NetworkManager[897]: <info> [1508405928.9828] device (wlp1s0): supplicant interface state: ready -> inactive
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.2951] device (wlp1s0): Activation: starting connection 'BGU-WPA' (42dd4ef6-f866-4b71-8269-199042dfbd77)
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.2965] audit: op="connection-activate" uuid="42dd4ef6-f866-4b71-8269-199042dfbd77" name="BGU-WPA" pid=1514 uid=
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.2971] device (wlp1s0): state change: disconnected -> prepare (reason 'none') [30 40 0]
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.2977] manager: NetworkManager state is now CONNECTING
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.3000] device (wlp1s0): state change: prepare -> config (reason 'none') [40 50 0]
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.3010] device (wlp1s0): Activation: (wifi) access point 'BGU-WPA' has security, but secrets are required.
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.3011] device (wlp1s0): state change: config -> need-auth (reason 'none') [50 60 0]
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4116] device (wlp1s0): state change: need-auth -> prepare (reason 'none') [60 40 0]
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4122] device (wlp1s0): state change: prepare -> config (reason 'none') [40 50 0]
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4124] device (wlp1s0): Activation: (wifi) connection 'BGU-WPA' has security, and secrets exist. No new secret
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4125] Config: added 'ssid' value 'BGU-WPA'
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4125] Config: added 'scan_ssid' value '1'
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4125] Config: added 'key_mgmt' value 'WPA-EAP'
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4125] Config: added 'password' value '<omitted>'
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4125] Config: added 'eap' value 'PEAP'
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4125] Config: added 'fragment_size' value '1266'
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4125] Config: added 'phase2' value 'auth=MSCHAPV2'
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4126] Config: added 'ca_path' value '/etc/ssl/certs'
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4126] Config: added 'ca_path2' value '/etc/ssl/certs'
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4126] Config: added 'identity' value 'sazawal'
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4126] Config: added 'bgscan' value 'simple:30:-65:300'
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4126] Config: added 'proactive_key_caching' value '1'
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4184] sup-iface[0x1b736c0,wlp1s0]: config: set interface ap_scan to 1
- Oct 19 12:38:53 sazcom wpa_supplicant[1000]: wlp1s0: SME: Trying to authenticate with 5c:83:8f:43:93:e0 (SSID='BGU-WPA' freq=2472 MHz)
- Oct 19 12:38:53 sazcom kernel: wlp1s0: authenticate with 5c:83:8f:43:93:e0
- Oct 19 12:38:53 sazcom kernel: wlp1s0: send auth to 5c:83:8f:43:93:e0 (try 1/3)
- Oct 19 12:38:53 sazcom kernel: wlp1s0: authenticated
- Oct 19 12:38:53 sazcom wpa_supplicant[1000]: wlp1s0: Trying to associate with 5c:83:8f:43:93:e0 (SSID='BGU-WPA' freq=2472 MHz)
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4343] device (wlp1s0): supplicant interface state: inactive -> authenticating
- Oct 19 12:38:53 sazcom kernel: wlp1s0: associate with 5c:83:8f:43:93:e0 (try 1/3)
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4359] device (wlp1s0): supplicant interface state: authenticating -> associating
- Oct 19 12:38:53 sazcom wpa_supplicant[1000]: wlp1s0: Associated with 5c:83:8f:43:93:e0
- Oct 19 12:38:53 sazcom kernel: wlp1s0: RX AssocResp from 5c:83:8f:43:93:e0 (capab=0x1431 status=0 aid=9)
- Oct 19 12:38:53 sazcom kernel: wlp1s0: associated
- Oct 19 12:38:53 sazcom kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
- Oct 19 12:38:53 sazcom gnome-session[1336]: (gnome-shell:1514): Gjs-WARNING **: JS ERROR: Gio.ResolverError: Error resolving 'openweathermap.org': Name or service not known
- Oct 19 12:38:53 sazcom gnome-session[1336]: OpenweatherMenuButton<._asyncReadyCallback@/home/sazawal/.local/share/gnome-shell/extensions/openweather-extension@jenslody.de/ext
- Oct 19 12:38:53 sazcom gnome-session[1336]: wrapper@resource:///org/gnome/gjs/modules/lang.js:178
- Oct 19 12:38:53 sazcom NetworkManager[897]: <info> [1508405933.4434] device (wlp1s0): supplicant interface state: associating -> associated
- Oct 19 12:38:53 sazcom wpa_supplicant[1000]: wlp1s0: CTRL-EVENT-EAP-STARTED EAP authentication started
- Oct 19 12:38:53 sazcom wpa_supplicant[1000]: wlp1s0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25
- Oct 19 12:38:53 sazcom wpa_supplicant[1000]: wlp1s0: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected
- Oct 19 12:38:53 sazcom wpa_supplicant[1000]: wlp1s0: CTRL-EVENT-EAP-FAILURE EAP authentication failed
- Oct 19 12:38:53 sazcom kernel: wlp1s0: Limiting TX power to 16 dBm as advertised by 5c:83:8f:43:93:e0
- Oct 19 12:38:54 sazcom gnome-session[1336]: (gnome-shell:1514): Gjs-WARNING **: JS ERROR: Gio.ResolverError: Error resolving 'openweathermap.org': Name or service not known
- Oct 19 12:38:54 sazcom gnome-session[1336]: OpenweatherMenuButton<._asyncReadyCallback@/home/sazawal/.local/share/gnome-shell/extensions/openweather-extension@jenslody.de/ext
- Oct 19 12:38:54 sazcom gnome-session[1336]: wrapper@resource:///org/gnome/gjs/modules/lang.js:178
- Oct 19 12:38:55 sazcom wpa_supplicant[1000]: wlp1s0: Authentication with 5c:83:8f:43:93:e0 timed out.
- Oct 19 12:38:55 sazcom kernel: wlp1s0: deauthenticating from 5c:83:8f:43:93:e0 by local choice (Reason: 3=DEAUTH_LEAVING)
- Oct 19 12:38:55 sazcom wpa_supplicant[1000]: wlp1s0: CTRL-EVENT-DISCONNECTED bssid=5c:83:8f:43:93:e0 reason=3 locally_generated=1
- Oct 19 12:38:55 sazcom wpa_supplicant[1000]: wlp1s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="BGU-WPA" auth_failures=1 duration=10 reason=AUTH_FAILED
- Oct 19 12:38:55 sazcom NetworkManager[897]: <warn> [1508405935.4786] sup-iface[0x1b736c0,wlp1s0]: connection disconnected (reason -3)
- Oct 19 12:38:55 sazcom NetworkManager[897]: <info> [1508405935.4843] device (wlp1s0): supplicant interface state: associated -> disconnected
- Oct 19 12:38:55 sazcom NetworkManager[897]: <info> [1508405935.5840] device (wlp1s0): supplicant interface state: disconnected -> scanning
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement