API tools faq
paste
Advertisement
Guest User

wiscore last fw rc342 dmesg

a guest
Aug 11th, 2017
124
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.77 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 3.18.45 (seven@seven-virtual-machine) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49389) ) #3 Mon Jun 5 16:11:13 CST 2017
  2. [ 0.000000] Board has DDR2
  3. [ 0.000000] Analog PMU set to hw control
  4. [ 0.000000] Digital PMU set to hw control
  5. [ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
  6. [ 0.000000] bootconsole [early0] enabled
  7. [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
  8. [ 0.000000] MIPS: machine is Mediatek MT7628AN evaluation board
  9. [ 0.000000] Determined physical RAM map:
  10. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  11. [ 0.000000] Initrd not found or empty - disabling initrd
  12. [ 0.000000] Zone ranges:
  13. [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
  14. [ 0.000000] Movable zone start for each node
  15. [ 0.000000] Early memory node ranges
  16. [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
  17. [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
  18. [ 0.000000] On node 0 totalpages: 16384
  19. [ 0.000000] free_area_init_node: node 0, pgdat 803240d0, node_mem_map 81000000
  20. [ 0.000000] Normal zone: 128 pages used for memmap
  21. [ 0.000000] Normal zone: 0 pages reserved
  22. [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
  23. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  24. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  25. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  26. [ 0.000000] pcpu-alloc: [0] 0
  27. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  28. [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
  29. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  30. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  31. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  32. [ 0.000000] Writing ErrCtl register=00040007
  33. [ 0.000000] Readback ErrCtl register=00040007
  34. [ 0.000000] Memory: 61168K/65536K available (2637K kernel code, 131K rwdata, 540K rodata, 200K init, 189K bss, 4368K reserved)
  35. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  36. [ 0.000000] NR_IRQS:256
  37. [ 0.000000] intc: using register map from devicetree
  38. [ 0.000000] CPU Clock: 575MHz
  39. [ 0.000000] clocksource_of_init: no matching clocksources found
  40. [ 0.050000] Calibrating delay loop... 380.92 BogoMIPS (lpj=1904640)
  41. [ 0.060000] pid_max: default: 32768 minimum: 301
  42. [ 0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  43. [ 0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  44. [ 0.080000] pinctrl core: initialized pinctrl subsystem
  45. [ 0.090000] NET: Registered protocol family 16
  46. [ 0.100000] rt2880-pinmux pinctrl: try to register 47 pins ...
  47. [ 0.100000] pinctrl core: registered pin 0 (io0) on rt2880-pinmux
  48. [ 0.100000] pinctrl core: registered pin 1 (io1) on rt2880-pinmux
  49. [ 0.100000] pinctrl core: registered pin 2 (io2) on rt2880-pinmux
  50. [ 0.100000] pinctrl core: registered pin 3 (io3) on rt2880-pinmux
  51. [ 0.100000] pinctrl core: registered pin 4 (io4) on rt2880-pinmux
  52. [ 0.100000] pinctrl core: registered pin 5 (io5) on rt2880-pinmux
  53. [ 0.100000] pinctrl core: registered pin 6 (io6) on rt2880-pinmux
  54. [ 0.100000] pinctrl core: registered pin 7 (io7) on rt2880-pinmux
  55. [ 0.100000] pinctrl core: registered pin 8 (io8) on rt2880-pinmux
  56. [ 0.100000] pinctrl core: registered pin 9 (io9) on rt2880-pinmux
  57. [ 0.100000] pinctrl core: registered pin 10 (io10) on rt2880-pinmux
  58. [ 0.100000] pinctrl core: registered pin 11 (io11) on rt2880-pinmux
  59. [ 0.100000] pinctrl core: registered pin 12 (io12) on rt2880-pinmux
  60. [ 0.100000] pinctrl core: registered pin 13 (io13) on rt2880-pinmux
  61. [ 0.100000] pinctrl core: registered pin 14 (io14) on rt2880-pinmux
  62. [ 0.100000] pinctrl core: registered pin 15 (io15) on rt2880-pinmux
  63. [ 0.100000] pinctrl core: registered pin 16 (io16) on rt2880-pinmux
  64. [ 0.100000] pinctrl core: registered pin 17 (io17) on rt2880-pinmux
  65. [ 0.100000] pinctrl core: registered pin 18 (io18) on rt2880-pinmux
  66. [ 0.100000] pinctrl core: registered pin 19 (io19) on rt2880-pinmux
  67. [ 0.100000] pinctrl core: registered pin 20 (io20) on rt2880-pinmux
  68. [ 0.100000] pinctrl core: registered pin 21 (io21) on rt2880-pinmux
  69. [ 0.100000] pinctrl core: registered pin 22 (io22) on rt2880-pinmux
  70. [ 0.100000] pinctrl core: registered pin 23 (io23) on rt2880-pinmux
  71. [ 0.100000] pinctrl core: registered pin 24 (io24) on rt2880-pinmux
  72. [ 0.100000] pinctrl core: registered pin 25 (io25) on rt2880-pinmux
  73. [ 0.100000] pinctrl core: registered pin 26 (io26) on rt2880-pinmux
  74. [ 0.100000] pinctrl core: registered pin 27 (io27) on rt2880-pinmux
  75. [ 0.100000] pinctrl core: registered pin 28 (io28) on rt2880-pinmux
  76. [ 0.100000] pinctrl core: registered pin 29 (io29) on rt2880-pinmux
  77. [ 0.100000] pinctrl core: registered pin 30 (io30) on rt2880-pinmux
  78. [ 0.100000] pinctrl core: registered pin 31 (io31) on rt2880-pinmux
  79. [ 0.100000] pinctrl core: registered pin 32 (io32) on rt2880-pinmux
  80. [ 0.100000] pinctrl core: registered pin 33 (io33) on rt2880-pinmux
  81. [ 0.100000] pinctrl core: registered pin 34 (io34) on rt2880-pinmux
  82. [ 0.100000] pinctrl core: registered pin 35 (io35) on rt2880-pinmux
  83. [ 0.100000] pinctrl core: registered pin 36 (io36) on rt2880-pinmux
  84. [ 0.100000] pinctrl core: registered pin 37 (io37) on rt2880-pinmux
  85. [ 0.100000] pinctrl core: registered pin 38 (io38) on rt2880-pinmux
  86. [ 0.100000] pinctrl core: registered pin 39 (io39) on rt2880-pinmux
  87. [ 0.100000] pinctrl core: registered pin 40 (io40) on rt2880-pinmux
  88. [ 0.100000] pinctrl core: registered pin 41 (io41) on rt2880-pinmux
  89. [ 0.100000] pinctrl core: registered pin 42 (io42) on rt2880-pinmux
  90. [ 0.100000] pinctrl core: registered pin 43 (io43) on rt2880-pinmux
  91. [ 0.100000] pinctrl core: registered pin 44 (io44) on rt2880-pinmux
  92. [ 0.100000] pinctrl core: registered pin 45 (io45) on rt2880-pinmux
  93. [ 0.100000] pinctrl core: registered pin 46 (io46) on rt2880-pinmux
  94. [ 0.100000] pinctrl core: add 3 pinmux maps
  95. [ 0.100000] rt2880-pinmux pinctrl: invalid group "jtag" for function "gpio"
  96. [ 0.110000] rt2880-pinmux pinctrl: found group selector 6 for perst
  97. [ 0.110000] rt2880-pinmux pinctrl: found group selector 15 for wled_an
  98. [ 0.110000] rt2880-pinmux pinctrl: request pin 36 (io36) for pinctrl
  99. [ 0.110000] rt2880-pinmux pinctrl: request pin 35 (io35) for pinctrl
  100. [ 0.110000] rt2880-pinmux pinctrl: failed to lookup the sleep state
  101. [ 0.120000] mt7621_gpio 10000600.gpio: registering 32 gpios
  102. [ 0.130000] mt7621_gpio 10000600.gpio: registering 32 gpios
  103. [ 0.140000] mt7621_gpio 10000600.gpio: registering 32 gpios
  104. [ 0.150000] Advanced Linux Sound Architecture Driver Initialized.
  105. [ 0.160000] Switched to clocksource MIPS
  106. [ 0.170000] NET: Registered protocol family 2
  107. [ 0.170000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  108. [ 0.190000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  109. [ 0.200000] TCP: Hash tables configured (established 1024 bind 1024)
  110. [ 0.210000] TCP: reno registered
  111. [ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  112. [ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  113. [ 0.240000] NET: Registered protocol family 1
  114. [ 0.250000] PCI: CLS 0 bytes, default 32
  115. [ 0.250000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
  116. [ 0.250000] futex hash table entries: 256 (order: -1, 3072 bytes)
  117. [ 0.270000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  118. [ 0.280000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  119. [ 0.310000] msgmni has been set to 119
  120. [ 0.320000] io scheduler noop registered
  121. [ 0.330000] io scheduler deadline registered (default)
  122. [ 0.340000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  123. [ 0.350000] serial8250 serial8250: no of_node; not parsing pinctrl DT
  124. [ 0.350000] pinctrl core: add 1 pinmux maps
  125. [ 0.350000] rt2880-pinmux pinctrl: found group selector 10 for uart0
  126. [ 0.350000] rt2880-pinmux pinctrl: request pin 12 (io12) for 10000c00.uartlite
  127. [ 0.350000] rt2880-pinmux pinctrl: request pin 13 (io13) for 10000c00.uartlite
  128. [ 0.360000] console [ttyS0] disabled
  129. [ 0.360000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
  130. [ 0.380000] console [ttyS0] enabled
  131. [ 0.390000] bootconsole [early0] disabled
  132. [ 0.410000] pinctrl core: add 1 pinmux maps
  133. [ 0.410000] rt2880-pinmux pinctrl: found group selector 3 for uart1
  134. [ 0.410000] rt2880-pinmux pinctrl: request pin 45 (io45) for 10000d00.uart1
  135. [ 0.410000] rt2880-pinmux pinctrl: request pin 46 (io46) for 10000d00.uart1
  136. [ 0.410000] 10000d00.uart1: ttyS1 at MMIO 0x10000d00 (irq = 29, base_baud = 2500000) is a 16550A
  137. [ 0.430000] pinctrl core: add 1 pinmux maps
  138. [ 0.430000] rt2880-pinmux pinctrl: found group selector 8 for spi
  139. [ 0.430000] rt2880-pinmux pinctrl: request pin 7 (io7) for 10000b00.spi
  140. [ 0.430000] rt2880-pinmux pinctrl: request pin 8 (io8) for 10000b00.spi
  141. [ 0.430000] rt2880-pinmux pinctrl: request pin 9 (io9) for 10000b00.spi
  142. [ 0.430000] rt2880-pinmux pinctrl: request pin 10 (io10) for 10000b00.spi
  143. [ 0.430000] spi-mt7621 10000b00.spi: sys_freq: 191666666
  144. [ 0.440000] m25p80 spi32766.0: found w25q128, expected en25q64
  145. [ 0.460000] m25p80 spi32766.0: w25q128 (16384 Kbytes)
  146. [ 0.470000] m25p80 spi32766.0: using chunked io
  147. [ 0.470000] 4 ofpart partitions found on MTD device spi32766.0
  148. [ 0.490000] Creating 4 MTD partitions on "spi32766.0":
  149. [ 0.500000] 0x000000000000-0x000000030000 : "u-boot"
  150. [ 0.510000] 0x000000030000-0x000000040000 : "u-boot-env"
  151. [ 0.520000] 0x000000040000-0x000000050000 : "factory"
  152. [ 0.530000] 0x000000050000-0x000002000000 : "firmware"
  153. [ 0.540000] mtd: partition "firmware" extends beyond the end of device "spi32766.0" -- size truncated to 0xfb0000
  154. [ 0.620000] 2 uimage-fw partitions found on MTD device firmware
  155. [ 0.640000] 0x000000050000-0x000000172daa : "kernel"
  156. [ 0.650000] 0x000000172daa-0x000001000000 : "rootfs"
  157. [ 0.660000] mtd: device 5 (rootfs) set to be root filesystem
  158. [ 0.670000] 1 squashfs-split partitions found on MTD device rootfs
  159. [ 0.680000] 0x0000008d0000-0x000001000000 : "rootfs_data"
  160. [ 0.700000] ralink_soc_eth 10100000.ethernet: generated random MAC address 0a:d5:86:0e:21:ed
  161. [ 0.720000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq 5
  162. [ 0.730000] mt7621_wdt 10000120.watchdog: Initialized
  163. [ 0.740000] TCP: cubic registered
  164. [ 0.750000] NET: Registered protocol family 17
  165. [ 0.760000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  166. [ 0.790000] 8021q: 802.1Q VLAN Support v1.8
  167. [ 0.790000] ALSA device list:
  168. [ 0.800000] No soundcards found.
  169. [ 0.830000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
  170. [ 0.840000] Freeing unused kernel memory: 200K (8033e000 - 80370000)
  171. [ 2.740000] init: Console is alive
  172. [ 2.750000] init: - watchdog -
  173. [ 5.800000] init: - preinit -
  174. [ 6.800000] rt305x-esw 10110000.esw: link changed 0x00
  175. [ 6.990000] random: mktemp urandom read with 10 bits of entropy available
  176. [ 9.930000] rt305x-esw 10110000.esw: link changed 0x01
  177. [ 10.400000] jffs2: notice: (318) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  178. [ 10.430000] mount_root: switching to jffs2 overlay
  179. [ 10.470000] procd: - early -
  180. [ 10.480000] procd: - watchdog -
  181. [ 11.190000] procd: - ubus -
  182. [ 12.200000] procd: - init -
  183. [ 13.150000] NET: Registered protocol family 10
  184. [ 13.180000] RPC: Registered named UNIX socket transport module.
  185. [ 13.200000] RPC: Registered udp transport module.
  186. [ 13.210000] RPC: Registered tcp transport module.
  187. [ 13.210000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  188. [ 13.260000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  189. [ 13.280000] i2c /dev entries driver
  190. [ 14.170000] <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
  191. [ 14.190000] <-- RTMPAllocAdapterBlock, Status=0
  192. [ 14.230000] snd-soc-dummy snd-soc-dummy: no of_node; not parsing pinctrl DT
  193. [ 14.240000] pinctrl core: add 1 pinmux maps
  194. [ 14.240000] rt2880-pinmux pinctrl: found group selector 4 for i2c
  195. [ 14.240000] rt2880-pinmux pinctrl: request pin 4 (io4) for 10000900.i2c
  196. [ 14.240000] rt2880-pinmux pinctrl: request pin 5 (io5) for 10000900.i2c
  197. [ 14.250000] i2c-ralink 10000900.i2c: loaded
  198. [ 14.290000] Enable Ralink GDMA Controller Module
  199. [ 14.300000] GDMA IP Version=3
  200. [ 14.310000] ===i2c slave device address = 0x0045
  201. [ 14.320000] snd_soc_mt76xx_i2s_ctl: module license 'unspecified' taints kernel.
  202. [ 14.340000] Disabling lock debugging due to kernel taint
  203. [ 14.360000] mt76xx-i2s mt76xx-i2s: no of_node; not parsing pinctrl DT
  204. [ 14.360000] mt76xx-pcm mt76xx-pcm: no of_node; not parsing pinctrl DT
  205. [ 14.360000] soc-audio soc-audio: no of_node; not parsing pinctrl DT
  206. [ 14.360000] soc-audio soc-audio: ASoC: machine MTK APSoC I2S should use snd_soc_register_card()
  207. [ 14.380000] zl380tw 0-0045: Probing zl380tw SoC CODEC driver
  208. [ 14.390000] ===>seven******* preallocate_dma_buffer *******
  209. [ 14.400000] ===>seven******* preallocate_dma_buffer *******
  210. [ 14.410000] soc-audio soc-audio: zl380tw-hifi <-> mt76xx-i2s mapping ok
  211. [ 14.540000] ip_tables: (C) 2000-2006 Netfilter Core Team
  212. [ 14.560000] nf_conntrack version 0.5.0 (958 buckets, 3832 max)
  213. [ 14.610000] xt_time: kernel timezone is -0000
  214. [ 14.630000] PPP generic driver version 2.4.2
  215. [ 14.650000] NET: Registered protocol family 24
  216. [ 19.010000] rt305x-esw 10110000.esw: link changed 0x00
  217. [ 22.190000] rt305x-esw 10110000.esw: link changed 0x01
  218. [ 23.850000] ===i2c slave device address = 0x0052
  219. [ 24.330000] device eth0.1 entered promiscuous mode
  220. [ 24.340000] device eth0 entered promiscuous mode
  221. [ 24.370000] br-lan: port 1(eth0.1) entered forwarding state
  222. [ 24.380000] br-lan: port 1(eth0.1) entered forwarding state
  223. [ 26.020000] efuse_probe: efuse = 10000012
  224. [ 26.190000] tssi_0_target_pwr_g_band = 34
  225. [ 26.200000] tssi_1_target_pwr_g_band = 34
  226. [ 26.380000] br-lan: port 1(eth0.1) entered forwarding state
  227. [ 29.830000] -->seven This SoC is in Slave mode
  228. [ 29.900000] trigger cmd:START
  229. [ 30.550000] random: nonblocking pool is initialized
  230. [ 33.930000] <==== rt28xx_init, Status=0
  231. [ 35.060000] device ra0 entered promiscuous mode
  232. [ 35.070000] br-lan: port 2(ra0) entered forwarding state
  233. [ 35.080000] br-lan: port 2(ra0) entered forwarding state
  234. [ 37.080000] br-lan: port 2(ra0) entered forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!