Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- M104 S0 ; turn off temperature
- G28 X0 ; home X axis
- M84 ; disable motors
- ; filament used = 2167.5mm (5.2cm3)
- ; avoid_crossing_perimeters = 0
- ; bed_shape = 0x0,200x0,200x200,0x200
- ; bed_temperature = 0
- ; before_layer_gcode =
- ; bridge_acceleration = 0
- ; bridge_fan_speed = 100
- ; brim_width = 4
- ; complete_objects = 0
- ; cooling = 0
- ; default_acceleration = 0
- ; disable_fan_first_layers = 3
- ; duplicate_distance = 6
- ; end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n
- ; extruder_clearance_height = 20
- ; extruder_clearance_radius = 20
- ; extruder_offset = 0x0
- ; extrusion_axis = E
- ; extrusion_multiplier = 1
- ; fan_always_on = 0
- ; fan_below_layer_time = 60
- ; filament_colour = #0000FF
- ; filament_diameter = 1.75
- ; first_layer_acceleration = 0
- ; first_layer_bed_temperature = 0
- ; first_layer_extrusion_width = 0
- ; first_layer_speed = 30
- ; first_layer_temperature = 190
- ; gcode_arcs = 0
- ; gcode_comments = 0
- ; gcode_flavor = reprap
- ; infill_acceleration = 0
- ; infill_first = 0
- ; layer_gcode =
- ; max_fan_speed = 100
- ; max_print_speed = 80
- ; max_volumetric_speed = 0
- ; min_fan_speed = 35
- ; min_print_speed = 10
- ; min_skirt_length = 0
- ; notes =
- ; nozzle_diameter = 0.4
- ; only_retract_when_crossing_perimeters = 1
- ; ooze_prevention = 0
- ; output_filename_format = [input_filename_base].gcode
- ; perimeter_acceleration = 0
- ; post_process =
- ; pressure_advance = 0
- ; resolution = 0
- ; retract_before_travel = 2
- ; retract_layer_change = 1
- ; retract_length = 1
- ; retract_length_toolchange = 10
- ; retract_lift = 0
- ; retract_restart_extra = 2
- ; retract_restart_extra_toolchange = 0
- ; retract_speed = 40
- ; skirt_distance = 2
- ; skirt_height = 1
- ; skirts = 1
- ; slowdown_below_layer_time = 5
- ; spiral_vase = 0
- ; standby_temperature_delta = -5
- ; start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
- ; temperature = 190
- ; threads = 2
- ; toolchange_gcode =
- ; travel_speed = 130
- ; use_firmware_retraction = 0
- ; use_relative_e_distances = 0
- ; use_volumetric_e = 0
- ; vibration_limit = 0
- ; wipe = 0
- ; z_offset = 0
- ; dont_support_bridges = 1
- ; extrusion_width = 0
- ; first_layer_height = 0.3
- ; infill_only_where_needed = 0
- ; interface_shells = 0
- ; layer_height = 0.2
- ; raft_layers = 0
- ; seam_position = aligned
- ; support_material = 1
- ; support_material_angle = 0
- ; support_material_contact_distance = 0.2
- ; support_material_enforce_layers = 1
- ; support_material_extruder = 1
- ; support_material_extrusion_width = 0
- ; support_material_interface_extruder = 1
- ; support_material_interface_layers = 3
- ; support_material_interface_spacing = 0
- ; support_material_interface_speed = 100%
- ; support_material_pattern = pillars
- ; support_material_spacing = 2.5
- ; support_material_speed = 60
- ; support_material_threshold = 0
- ; xy_size_compensation = 0
- ; bottom_solid_layers = 3
- ; bridge_flow_ratio = 1
- ; bridge_speed = 60
- ; external_fill_pattern = rectilinear
- ; external_perimeter_extrusion_width = 0
- ; external_perimeter_speed = 50%
- ; external_perimeters_first = 0
- ; extra_perimeters = 1
- ; fill_angle = 45
- ; fill_density = 20%
- ; fill_pattern = honeycomb
- ; gap_fill_speed = 20
- ; infill_every_layers = 1
- ; infill_extruder = 1
- ; infill_extrusion_width = 0
- ; infill_overlap = 80%
- ; infill_speed = 60
- ; overhangs = 1
- ; perimeter_extruder = 1
- ; perimeter_extrusion_width = 0
- ; perimeter_speed = 60
- ; perimeters = 3
- ; small_perimeter_speed = 15
- ; solid_infill_below_area = 50
- ; solid_infill_every_layers = 0
- ; solid_infill_extruder = 1
- ; solid_infill_extrusion_width = 0
- ; solid_infill_speed = 20
- ; thin_walls = 1
- ; top_infill_extrusion_width = 0
- ; top_solid_infill_speed = 15
- ; top_solid_layers = 3
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
