SHARE
TWEET

retroarcgcfgwm

a guest Aug 31st, 2016 234 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. ## Skeleton config file for RetroArch
  2.  
  3. # Save all save files (*.srm) to this directory. This includes related files like .bsv, .rtc, .psrm, etc ...
  4. # This will be overridden by explicit command line options.
  5. # savefile_directory =
  6.  
  7. # Save all save states (*.state) to this directory.
  8. # This will be overridden by explicit command line options.
  9. # savestate_directory =
  10.  
  11. # If set to a directory, Content which is temporarily extracted
  12. # will be extracted to this directory.
  13. # extraction_directory =
  14.  
  15. # Save all input remapping files to this directory.
  16. # input_remapping_directory =
  17.  
  18. # Save all playlist files to this directory.
  19. # playlist_directory =
  20.  
  21. # If set to a directory, the content history playlist will be saved
  22. # to this directory.
  23. # content_history_dir =
  24.  
  25. # Automatically saves a savestate at the end of RetroArch's lifetime.
  26. # The path is $SRAM_PATH.auto.
  27. # RetroArch will automatically load any savestate with this path on startup if savestate_auto_load is set.
  28. # savestate_auto_save = false
  29. # savestate_auto_load = true
  30.  
  31. # Load libretro from a dynamic location for dynamically built RetroArch.
  32. # This option is mandatory.
  33.  
  34. # Path to a libretro implementation.
  35. # libretro_path = "/path/to/libretro.so"
  36.  
  37. # A directory for where to search for libretro core implementations.
  38. # libretro_directory =
  39.  
  40. # A directory for where to search for libretro core information.
  41. # libretro_info_path =
  42.  
  43. # Sets log level for libretro cores (GET_LOG_INTERFACE).
  44. # If a log level issued by a libretro core is below libretro_log_level, it is ignored.
  45. # DEBUG logs are always ignored unless verbose mode is activated (--verbose).
  46. # DEBUG = 0, INFO = 1, WARN = 2, ERROR = 3.
  47. # libretro_log_level = 0
  48.  
  49. # Enable or disable verbosity level of frontend.
  50. # log_verbosity = false
  51.  
  52. # If this option is enabled, every content file loaded in RetroArch will be
  53. # automatically added to a history list.
  54. # history_list_enable = true
  55.  
  56. # Enable or disable RetroArch performance counters
  57. # perfcnt_enable = false
  58.  
  59. # Path to core options config file.
  60. # This config file is used to expose core-specific options.
  61. # It will be written to by RetroArch.
  62. # A default path will be assigned if not set.
  63. core_options_path = /opt/retropie/configs/all/retroarch-core-options.cfg
  64.  
  65. # Path to content load history file.
  66. # RetroArch keeps track of all content loaded in the menu and from CLI directly for convenient quick loading.
  67. # A default path will be assigned if not set.
  68. # content_history_path =
  69.  
  70. # Number of entries that will be kept in content history file.
  71. # content_history_size = 100
  72.  
  73. # Sets the "system" directory.
  74. # Implementations can query for this directory to load BIOSes, system-specific configs, etc.
  75. system_directory = /home/pi/RetroPie/BIOS
  76.  
  77. # Sets start directory for menu content browser.
  78. # rgui_browser_directory =
  79.  
  80. # Content directory. Interacts with RETRO_ENVIRONMENT_GET_CONTENT_DIRECTORY.
  81. # Usually set by developers who bundle libretro/RetroArch apps to point to assets.
  82. # content_directory =
  83.  
  84. # Assets directory. This location is queried by default when menu interfaces try to look for
  85. # loadable assets, etc.
  86. assets_directory = /opt/retropie/emulators/retroarch/assets
  87.  
  88. # Dynamic wallpapers directory. The place to store the wallpapers dynamically
  89. # loaded by the menu depending on context.
  90. # dynamic_wallpapers_directory =
  91.  
  92. # Boxarts directory. To store boxart PNG files.
  93. # boxarts_directory =
  94.  
  95. # Sets start directory for menu config browser.
  96. # rgui_config_directory =
  97.  
  98. # Show startup screen in menu.
  99. # Is automatically set to false when seen for the first time.
  100. # This is only updated in config if config_save_on_exit is set to true, however.
  101. # rgui_show_start_screen = true
  102.  
  103. # Flushes config to disk on exit. Useful for menu as settings can be modified.
  104. # Overwrites the config. #include's and comments are not preserved.
  105. config_save_on_exit = "false"
  106.  
  107. # Load up a specific config file based on the core being used.
  108. # core_specific_config = false
  109.  
  110. #### Video
  111.  
  112. # Video driver to use. "gl", "xvideo", "sdl"
  113. # video_driver = "gl"
  114.  
  115. # Which OpenGL context implementation to use.
  116. # Possible ones for desktop are: glx, x-egl, kms-egl, sdl-gl, wgl.
  117. # By default, tries to use first suitable driver.
  118. # video_context_driver =
  119.  
  120. # Windowed x resolution scale and y resolution scale
  121. # (Real x res: base_size * xscale * aspect_ratio, real y res: base_size * yscale)
  122. # video_scale = 3.0
  123.  
  124. # Fullscreen resolution. Resolution of 0 uses the resolution of the desktop.
  125. # video_fullscreen_x = 0
  126. # video_fullscreen_y = 0
  127.  
  128. # Start in fullscreen. Can be changed at runtime.
  129. # video_fullscreen = false
  130.  
  131. # If fullscreen, prefer using a windowed fullscreen mode.
  132. # video_windowed_fullscreen = true
  133.  
  134. # Which monitor to prefer. 0 (default) means no particular monitor is preferred, 1 and up (1 being first monitor),
  135. # suggests RetroArch to use that particular monitor.
  136. # video_monitor_index = 0
  137.  
  138. # Forcibly disable composition. Only works in Windows Vista/7 for now.
  139. # video_disable_composition = false
  140.  
  141. # Video vsync.
  142. # video_vsync = true
  143.  
  144. # Forcibly disable sRGB FBO support. Some Intel OpenGL drivers on Windows
  145. # have video problems with sRGB FBO support enabled.
  146. # video_force_srgb_disable = false
  147.  
  148. # Attempts to hard-synchronize CPU and GPU. Can reduce latency at cost of performance.
  149. # video_hard_sync = false
  150.  
  151. # Sets how many frames CPU can run ahead of GPU when using video_hard_sync.
  152. # Maximum is 3.
  153. # video_hard_sync_frames = 0
  154.  
  155. # Sets how many milliseconds to delay after VSync before running the core.
  156. # Can reduce latency at cost of higher risk of stuttering.
  157. # Maximum is 15.
  158. # video_frame_delay = 0
  159.  
  160. # Inserts a black frame inbetween frames.
  161. # Useful for 120 Hz monitors who want to play 60 Hz material with eliminated ghosting.
  162. # video_refresh_rate should still be configured as if it is a 60 Hz monitor (divide refresh rate by 2).
  163. # video_black_frame_insertion = false
  164.  
  165. # Use threaded video driver. Using this might improve performance at possible cost of latency and more video stuttering.
  166. video_threaded = true
  167.  
  168. # Use a shared context for HW rendered libretro cores.
  169. # Avoids having to assume HW state changes inbetween frames.
  170. # video_shared_context = false
  171.  
  172. # Smoothens picture with bilinear filtering. Should be disabled if using pixel shaders.
  173. video_smooth = true
  174.  
  175. # Forces rendering area to stay equal to content aspect ratio or as defined in video_aspect_ratio.
  176. # video_force_aspect = true
  177.  
  178. # Only scales video in integer steps.
  179. # The base size depends on system-reported geometry and aspect ratio.
  180. # If video_force_aspect is not set, X/Y will be integer scaled independently.
  181. # video_scale_integer = false
  182.  
  183. # A floating point value for video aspect ratio (width / height).
  184. # If this is not set, aspect ratio is assumed to be automatic.
  185. # Behavior then is defined by video_aspect_ratio_auto.
  186. # video_aspect_ratio =
  187.  
  188. # If this is true and video_aspect_ratio is not set,
  189. # aspect ratio is decided by libretro implementation.
  190. # If this is false, 1:1 PAR will always be assumed if video_aspect_ratio is not set.
  191. video_aspect_ratio_auto = true
  192.  
  193. # Forces cropping of overscanned frames.
  194. # Exact behavior of this option is implementation specific.
  195. # video_crop_overscan = true
  196.  
  197. # Path to shader. Shader can be either Cg, CGP (Cg preset) or GLSL, GLSLP (GLSL preset)
  198. # video_shader = "/path/to/shader.{cg,cgp,glsl,glslp}"
  199.  
  200. # Load video_shader on startup.
  201. # Other shaders can still be loaded later in runtime.
  202. # video_shader_enable = false
  203.  
  204. # Defines a directory where shaders (Cg, CGP, GLSL) are kept for easy access.
  205. video_shader_dir = /opt/retropie/emulators/retroarch/shader/
  206.  
  207. # CPU-based video filter. Path to a dynamic library.
  208. # video_filter =
  209.  
  210. # Defines a directory where CPU-based video filters are kept.
  211. # video_filter_dir =
  212.  
  213. # Path to a font used for rendering messages. This path must be defined to enable fonts.
  214. # Do note that the _full_ path of the font is necessary!
  215. # video_font_path =
  216.  
  217. # Size of the font rendered.
  218. video_font_size = 12
  219.  
  220. # Enable usage of OSD messages.
  221. # video_font_enable = true
  222.  
  223. # Offset for where messages will be placed on screen. Values are in range 0.0 to 1.0 for both x and y values.
  224. # [0.0, 0.0] maps to the lower left corner of the screen.
  225. # video_message_pos_x = 0.05
  226. # video_message_pos_y = 0.05
  227.  
  228. # Color for message. The value is treated as a hexadecimal value.
  229. # It is a regular RGB hex number, i.e. red is "ff0000".
  230. # video_message_color = ffffff
  231.  
  232. # Video refresh rate of your monitor.
  233. # Used to calculate a suitable audio input rate.
  234. # video_refresh_rate = 59.95
  235.  
  236. # Allows libretro cores to set rotation modes.
  237. # Setting this to false will honor, but ignore this request.
  238. # This is useful for vertically oriented content where one manually rotates the monitor.
  239. # video_allow_rotate = true
  240.  
  241. # Forces a certain rotation of the screen.
  242. # The rotation is added to rotations which the libretro core sets (see video_allow_rotate).
  243. # The angle is <value> * 90 degrees counter-clockwise.
  244. # video_rotation = 0
  245.  
  246. #### Audio
  247.  
  248. # Enable audio.
  249. # audio_enable = true
  250.  
  251. # Mutes audio.
  252. # audio_mute_enable = false
  253.  
  254. # Audio output samplerate.
  255. # audio_out_rate = 48000
  256.  
  257. # Audio resampler backend. Which audio resampler to use.
  258. # Default will use "sinc".
  259. # audio_resampler =
  260.  
  261. # Audio driver backend. Depending on configuration possible candidates are: alsa, pulse, oss, jack, rsound, roar, openal, sdl, xaudio.
  262. # audio_driver =
  263.  
  264. # Override the default audio device the audio_driver uses. This is driver dependant. E.g. ALSA wants a PCM device, OSS wants a path (e.g. /dev/dsp), Jack wants portnames (e.g. system:playback1,system:playback_2), and so on ...
  265. # audio_device =
  266.  
  267. # Audio DSP plugin that processes audio before it's sent to the driver. Path to a dynamic library.
  268. # audio_dsp_plugin =
  269.  
  270. # Directory where DSP plugins are kept.
  271. # audio_filter_dir =
  272.  
  273. # Will sync (block) on audio. Recommended.
  274. # audio_sync = true
  275.  
  276. # Desired audio latency in milliseconds. Might not be honored if driver can't provide given latency.
  277. # audio_latency = 64
  278.  
  279. # Enable audio rate control.
  280. # audio_rate_control = true
  281.  
  282. # Controls audio rate control delta. Defines how much input rate can be adjusted dynamically.
  283. # Input rate = in_rate * (1.0 +/- audio_rate_control_delta)
  284. # audio_rate_control_delta = 0.005
  285.  
  286. # Controls maximum audio timing skew. Defines the maximum change in input rate.
  287. # Input rate = in_rate * (1.0 +/- max_timing_skew)
  288. # audio_max_timing_skew = 0.05
  289.  
  290. # Audio volume. Volume is expressed in dB.
  291. # 0 dB is normal volume. No gain will be applied.
  292. # Gain can be controlled in runtime with input_volume_up/input_volume_down.
  293. # audio_volume = 0.0
  294.  
  295. #### Overlay
  296.  
  297. # Defines a directory where overlays are kept for easy access.
  298. overlay_directory = /opt/retropie/emulators/retroarch/overlays
  299.  
  300. # Enable or disable the current overlay.
  301. # input_overlay_enable = true
  302.  
  303. # Hide the current overlay from appearing in menu screens.
  304. # input_overlay_hide_in_menu = true
  305.  
  306. # Path to input overlay
  307. # input_overlay =
  308.  
  309. # Overlay opacity
  310. # input_overlay_opacity = 1.0
  311.  
  312. # Overlay scale
  313. # input_overlay_scale = 1.0
  314.  
  315. #### OSK (Onscreen Keyboard) Overlay
  316.  
  317. # Defines a directory where overlays are kept for easy access.
  318. # osk_overlay_directory =
  319.  
  320. # Enable OSK overlay.
  321. # input_osk_overlay_enable = true
  322.  
  323. # Path to OSK overlay
  324. # input_osk_overlay =
  325.  
  326. # OSK Overlay opacity
  327. # input_osk_overlay_opacity = 1.0
  328.  
  329. # OSK Overlay scale
  330. # input_osk_overlay_scale = 1.0
  331.  
  332. #### Input
  333.  
  334. # Input driver. Depending on video driver, it might force a different input driver.
  335. # input_driver = sdl
  336.  
  337. # Input device driver. (Valid: linuxraw, sdl, dinput)
  338. input_joypad_driver = udev
  339.  
  340. # Path to input remapping file.
  341. # input_remapping_path =
  342.  
  343. # If enabled, overrides the input binds with the remapped binds set for the current core.
  344. # input_remap_binds_enable = true
  345.  
  346. # Maximum amount of users supported by RetroArch.
  347. # input_max_users = 16
  348.  
  349. # Keyboard layout for input driver if applicable (udev/evdev for now).
  350. # Syntax is either just layout (e.g. "no"), or a layout and variant separated with colon ("no:nodeadkeys").
  351. # input_keyboard_layout =
  352.  
  353. # Defines axis threshold. Possible values are [0.0, 1.0]
  354. # input_axis_threshold = 0.5
  355.  
  356. # Enable input auto-detection. Will attempt to autoconfigure
  357. # joypads, Plug-and-Play style.
  358. input_autodetect_enable = true
  359.  
  360. # Show the input descriptors set by the core instead of the
  361. # default ones.
  362. # input_descriptor_label_show = true
  363.  
  364. # Hide input descriptors that were not set by the core.
  365. # input_descriptor_hide_unbound = false
  366.  
  367. # Influence how input polling is done inside RetroArch.
  368. # 0 : Early  - Input polling is performed before call to retro_run.
  369. # 1 : Normal - Input polling is performend when retro_input_poll is
  370. #     requested.
  371. # 2 : Late   - Input polling is performed on first call to retro_input_state
  372. #     per frame
  373. #
  374. # Setting it to 0 or 2 can result in less latency depending on
  375. # your configuration.
  376. #
  377. # When netplay is enabled, the default polling behavior (1) will
  378. # be used regardless of the value set here.
  379. # input_poll_type_behavior = 1
  380.  
  381. # Directory for joypad autoconfigs.
  382. # If a joypad is plugged in, that joypad will be autoconfigured if a config file
  383. # corresponding to that joypad is present in joypad_autoconfig_dir.
  384. # Input binds which are made explicit (input_playerN_*_btn/axis) will take priority over autoconfigs.
  385. # Autoconfigs can be created with retroarch-joyconfig, manually, or with a frontend.
  386. # Requires input_autodetect_enable to be enabled.
  387. joypad_autoconfig_dir = /opt/retropie/configs/all/retroarch-joypads/
  388.  
  389. # Sets which libretro device is used for a user.
  390. # Devices are indentified with a number.
  391. # This is normally saved by the menu.
  392. # Device IDs are found in libretro.h.
  393. # These settings are overridden by explicit command-line arguments which refer to input devices.
  394. # None: 0
  395. # Joypad (RetroPad): 1
  396. # Mouse: 2
  397. # Keyboard: 3
  398. # Generic Lightgun: 4
  399. # Joypad w/ Analog (RetroPad + Analog sticks): 5
  400. # Multitap (SNES specific): 257
  401. # Super Scope (SNES specific): 260
  402. # Justifier (SNES specific): 516
  403. # Justifiers (SNES specific): 772
  404.  
  405. # input_libretro_device_p1 =
  406. # input_libretro_device_p2 =
  407. # input_libretro_device_p3 =
  408. # input_libretro_device_p4 =
  409. # input_libretro_device_p5 =
  410. # input_libretro_device_p6 =
  411. # input_libretro_device_p7 =
  412. # input_libretro_device_p8 =
  413.  
  414. # Keyboard input. Will recognize letters ("a" to "z") and the following special keys (where "kp_"
  415. # is for keypad keys):
  416. #
  417. #   left, right, up, down, enter, kp_enter, tab, insert, del, end, home,
  418. #   rshift, shift, ctrl, alt, space, escape, add, subtract, kp_plus, kp_minus,
  419. #   f1, f2, f3, f4, f5, f6, f7, f8, f9, f10, f11, f12,
  420. #   num0, num1, num2, num3, num4, num5, num6, num7, num8, num9, pageup, pagedown,
  421. #   keypad0, keypad1, keypad2, keypad3, keypad4, keypad5, keypad6, keypad7, keypad8, keypad9,
  422. #   period, capslock, numlock, backspace, multiply, divide, print_screen, scroll_lock,
  423. #   tilde, backquote, pause, quote, comma, minus, slash, semicolon, equals, leftbracket,
  424. #   backslash, rightbracket, kp_period, kp_equals, rctrl, ralt
  425. #
  426. # Keyboard input, Joypad and Joyaxis will all obey the "nul" bind, which disables the bind completely,
  427. # rather than relying on a default.
  428. input_player1_a = "z"
  429. input_player1_b = "x"
  430. input_player1_y = "s"
  431. input_player1_x = "a"
  432. input_player1_start = "enter"
  433. input_player1_select = "rshift"
  434. input_player1_l = "q"
  435. input_player1_r = "p"
  436. input_player1_left = "left"
  437. input_player1_right = "right"
  438. input_player1_up = "up"
  439. input_player1_down = "down"
  440. input_player1_l2 = "w"
  441. input_player1_r2 = "o"
  442. # input_player1_l3 =
  443. # input_player1_r3 =
  444.  
  445. # Two analog sticks (DualShock-esque).
  446. # Bound as usual, however, if a real analog axis is bound,
  447. # it can be read as a true analog.
  448. # Positive X axis is right, Positive Y axis is down.
  449. # input_player1_l_x_plus =
  450. # input_player1_l_x_minus =
  451. # input_player1_l_y_plus =
  452. # input_player1_l_y_minus =
  453. # input_player1_r_x_plus =
  454. # input_player1_r_x_minus =
  455. # input_player1_r_y_plus =
  456. # input_player1_r_y_minus =
  457.  
  458. # If desired, it is possible to override which joypads are being used for user 1 through 8.
  459. # First joypad available is 0.
  460. # input_player1_joypad_index = 0
  461. # input_player2_joypad_index = 1
  462. # input_player3_joypad_index = 2
  463. # input_player4_joypad_index = 3
  464. # input_player5_joypad_index = 4
  465. # input_player6_joypad_index = 5
  466. # input_player7_joypad_index = 6
  467. # input_player8_joypad_index = 7
  468.  
  469. # Input device buttons.
  470. # Figure these out by using RetroArch-Phoenix or retroarch-joyconfig.
  471. # You can use joypad hats with hnxx, where n is the hat, and xx is a string representing direction.
  472. # E.g. "h0up"
  473. # input_player1_a_btn =
  474. # input_player1_b_btn =
  475. # input_player1_y_btn =
  476. # input_player1_x_btn =
  477. # input_player1_start_btn =
  478. # input_player1_select_btn =
  479. # input_player1_l_btn =
  480. # input_player1_r_btn =
  481. # input_player1_left_btn =
  482. # input_player1_right_btn =
  483. # input_player1_up_btn =
  484. # input_player1_down_btn =
  485. # input_player1_l2_btn =
  486. # input_player1_r2_btn =
  487. # input_player1_l3_btn =
  488. # input_player1_r3_btn =
  489.  
  490. # Menu buttons.
  491. # menu_ok_btn          =
  492. # menu_cancel_btn      =
  493. # menu_search_btn      =
  494. # menu_info_btn        =
  495. # menu_default_btn     =
  496. # menu_scroll_down_btn =
  497. # menu_scroll_up_btn   =
  498.  
  499. # Axis for RetroArch D-Pad.
  500. # Needs to be either '+' or '-' in the first character signaling either positive or negative direction of the axis, then the axis number.
  501. # Do note that every other input option has the corresponding _btn and _axis binds as well; they are omitted here for clarity.
  502. # input_player1_left_axis =
  503. # input_player1_right_axis =
  504. # input_player1_up_axis =
  505. # input_player1_down_axis =
  506.  
  507. # Holding the turbo while pressing another button will let the button enter a turbo mode
  508. # where the button state is modulated with a periodic signal.
  509. # The modulation stops when the button itself (not turbo button) is released.
  510. # input_player1_turbo =
  511.  
  512. # Describes the period and how long of that period a turbo-enabled button should behave.
  513. # Numbers are described in frames.
  514. # input_turbo_period = 6
  515. # input_turbo_duty_cycle = 3
  516.  
  517. # This goes all the way to user 8 (*_player2_*, *_player3_*, etc), but omitted for clarity.
  518. # All input binds have corresponding binds for keyboard (none), joykeys (_btn) and joyaxes (_axis) as well.
  519.  
  520. # Toggles fullscreen.
  521. # input_toggle_fullscreen = f
  522.  
  523. # Saves state.
  524. # input_save_state = f2
  525. # Loads state.
  526. # input_load_state = f4
  527.  
  528. # State slots. With slot set to 0, save state name is *.state (or whatever defined on commandline).
  529. # When slot is != 0, path will be $path%d, where %d is slot number.
  530. input_state_slot_increase = "right"
  531. input_state_slot_decrease = "left"
  532.  
  533. # Toggles between fast-forwarding and normal speed.
  534. # input_toggle_fast_forward = space
  535.  
  536. # Hold for fast-forward. Releasing button disables fast-forward.
  537. # input_hold_fast_forward = l
  538.  
  539. # Key to exit RetroArch cleanly.
  540. # Killing it in any hard way (SIGKILL, etc) will terminate RetroArch without saving RAM, etc.
  541. # On Unix-likes, SIGINT/SIGTERM allows a clean deinitialization.
  542. #input_exit_emulator = "enter"
  543.  
  544.  
  545. # Applies next and previous shader in directory.
  546. input_shader_next = m
  547. input_shader_prev = n
  548.  
  549. # Hold button down to rewind. Rewinding must be enabled.
  550. input_rewind = r
  551.  
  552. # Toggle between recording and not.
  553. # input_movie_record_toggle = o
  554.  
  555. # Toggle between paused and non-paused state
  556. # input_pause_toggle = p
  557.  
  558. # Frame advance when content is paused
  559. # input_frame_advance = k
  560.  
  561. # Reset the content.
  562. input_reset = "x"
  563.  
  564. # Cheats.
  565. # input_cheat_index_plus = y
  566. # input_cheat_index_minus = t
  567. # input_cheat_toggle = u
  568.  
  569. # Mute/unmute audio
  570. # input_audio_mute = f9
  571.  
  572. # Take screenshot
  573. # input_screenshot = f8
  574.  
  575. # Netplay flip users.
  576. # input_netplay_flip_players = i
  577.  
  578. # Hold for slowmotion.
  579. # input_slowmotion = e
  580.  
  581. # Enable other hotkeys.
  582. # If this hotkey is bound to either keyboard, joybutton or joyaxis,
  583. # all other hotkeys will be disabled unless this hotkey is also held at the same time.
  584. # This is useful for RETRO_KEYBOARD centric implementations
  585. # which query a large area of the keyboard, where it is not desirable
  586. # that hotkeys get in the way.
  587.  
  588. # Alternatively, all hotkeys for keyboard could be disabled by the user.
  589. # input_enable_hotkey_btn =
  590.  
  591. # Increases audio volume.
  592. # input_volume_up = kp_plus
  593. # Decreases audio volume.
  594. # input_volume_down = kp_minus
  595.  
  596. # Toggles to next overlay. Wraps around.
  597. # input_overlay_next =
  598.  
  599. # Toggles eject for disks. Used for multiple-disk content.
  600. # input_disk_eject_toggle =
  601.  
  602. # Cycles through disk images. Use after ejecting.
  603. # Complete by toggling eject again.
  604. # input_disk_next =
  605.  
  606. # Toggles menu.
  607. input_menu_toggle = "a"
  608.  
  609. # RetroPad button combination to toggle menu
  610. # 0 = none, 1 = L + R + Y + D-Pad Down, 2 = L3 + R3
  611. # input_menu_toggle_gamepad_combo = 0
  612.  
  613. # Toggles mouse grab. When mouse is grabbed, RetroArch hides the mouse,
  614. # and keeps the mouse pointer inside the window to allow relative mouse input
  615. # to work better.
  616. # input_grab_mouse_toggle = f11
  617.  
  618. #### Menu
  619.  
  620. # Menu driver to use. "rgui", "lakka", etc.
  621. # menu_driver = "rgui"
  622.  
  623. # If enabled, the libretro core will keep running in the background when we
  624. # are in the menu.
  625. # menu_pause_libretro = false
  626.  
  627. # Enable mouse input inside the menu.
  628. # menu_mouse_enable = false
  629.  
  630. # Enable touch input inside the menu.
  631. # menu_pointer_enable = false
  632.  
  633. # Shows current date and/or time inside menu.
  634. # menu_timedate_enable = true
  635.  
  636. # Shows current core inside menu.
  637. # menu_core_enable = true
  638.  
  639. # Path to a .png image to set as menu wallpaper.
  640. # menu_wallpaper =
  641.  
  642. # Dynamically load a new wallpaper depending on context.
  643. # menu_dynamic_wallpaper_enable = false
  644.  
  645. # Display boxart in place of the content icon if available
  646. # menu_boxart_enable = false
  647.  
  648. # Wrap-around toe beginning and/or end if boundary of list reached horizontally
  649. # menu_navigation_wraparound_horizontal_enable = false
  650.  
  651. # Wrap-around to beginning and/or end if boundary of list reached vertically
  652. # menu_navigation_wraparound_vertical_enable = false
  653.  
  654. # Filter files being show in 'Load Content' by supported extensions
  655. # menu_navigation_browser_filter_supported_extensions_enable = true
  656.  
  657. # Collapse subgroup settings into main group to create one big listing of settings
  658. # per category.
  659. # menu_collapse_subgroups_enable = false
  660.  
  661. #### UI
  662.  
  663. # Suspends the screensaver if set to true. Is a hint that does not necessarily have to be honored
  664. # by video driver.
  665. # suspend_screensaver_enable  = true
  666.  
  667. # Start UI companion driver's interface on boot (if available).
  668. # ui_companion_start_on_boot  = true
  669.  
  670. #### Camera
  671.  
  672. # Override the default camera device the camera driver uses. This is driver dependant.
  673. # camera_device =
  674.  
  675. # Override the default privacy permission for cores that want to access camera services. Is "false" by default.
  676. # camera_allow = false
  677.  
  678. #### Location
  679.  
  680. # Override the default privacy permission for cores that want to access location services. Is "false" by default.
  681. # location_allow = false
  682.  
  683. #### Core Updater
  684.  
  685. # URL to core update directory on buildbot.
  686. # core_updater_buildbot_url = "http://buildbot.libretro.com"
  687.  
  688. # URL to assets update directory on buildbot.
  689. # core_updater_buildbot_assets_url = "http://buildbot.libretro.com/assets/"
  690.  
  691. # Automatically extract archives that the cores are contained in to the libretro cores directory.
  692. # core_updater_auto_extract_archive = true
  693.  
  694. #### Network
  695.  
  696. # When being client over netplay, use keybinds for user 1.
  697. # netplay_client_swap_input = false
  698.  
  699. # The username of the person running RetroArch. This will be used for playing online, for instance.
  700. # netplay_nickname =
  701.  
  702. # The amount of delay frames to use for netplay. Increasing this value will increase
  703. # performance, but introduce more latency.
  704. # netplay_delay_frames = 0
  705.  
  706. # Netplay mode for the current user.
  707. # false is Server, true is Client.
  708. # netplay_mode = false
  709.  
  710. # Enable or disable spectator mode for the user during netplay.
  711. # netplay_spectator_mode_enable = false
  712.  
  713. # The IP Address of the host to connect to.
  714. # netplay_ip_address =
  715.  
  716. # The port of the host IP Address. Can be either a TCP or an UDP port.
  717. # netplay_ip_port = 55435
  718.  
  719. #### Misc
  720.  
  721. # Enable rewinding. This will take a performance hit when playing, so it is disabled by default.
  722. rewind_enable = false
  723.  
  724. # Rewinding buffer size in megabytes. Bigger rewinding buffer means you can rewind longer.
  725. # The buffer should be approx. 20MB per minute of buffer time.
  726. rewind_buffer_size = 10
  727.  
  728. # Rewind granularity. When rewinding defined number of frames, you can rewind several frames at a time, increasing the rewinding speed.
  729. rewind_granularity = 2
  730.  
  731. # Pause gameplay when window focus is lost.
  732. # pause_nonactive = true
  733.  
  734. # Autosaves the non-volatile SRAM at a regular interval. This is disabled by default unless set otherwise.
  735. # The interval is measured in seconds. A value of 0 disables autosave.
  736. # autosave_interval =
  737.  
  738. # Path to content database directory.
  739. # content_database_path =
  740.  
  741. # Path to cheat database directory.
  742. # cheat_database_path =
  743.  
  744. # Path to XML cheat config, a file which keeps track of which
  745. # cheat settings are used for individual games.
  746. # If the file does not exist, it will be created.
  747. # cheat_settings_path =
  748.  
  749. # Directory to dump screenshots to.
  750. # screenshot_directory =
  751.  
  752. # Records video after CPU video filter.
  753. # video_post_filter_record = false
  754.  
  755. # Records output of GPU shaded material if available.
  756. # video_gpu_record = false
  757.  
  758. # Screenshots output of GPU shaded material if available.
  759. video_gpu_screenshot = true
  760.  
  761. # Block SRAM from being overwritten when loading save states.
  762. # Might potentially lead to buggy games.
  763. # block_sram_overwrite = false
  764.  
  765. # When saving a savestate, save state index is automatically increased before
  766. # it is saved.
  767. # Also, when loading content, the index will be set to the highest existing index.
  768. # There is no upper bound on the index.
  769. # savestate_auto_index = false
  770.  
  771. # Slowmotion ratio. When slowmotion, content will slow down by factor.
  772. # slowmotion_ratio = 3.0
  773.  
  774. # The maximum rate at which content will be run when using fast forward. (E.g. 5.0 for 60 fps content => 300 fps cap).
  775. # RetroArch will go to sleep to ensure that the maximum rate will not be exceeded.
  776. # Do not rely on this cap to be perfectly accurate.
  777. # If this is set at 0, then fastforward ratio is unlimited (no FPS cap)
  778. # fastforward_ratio = 0.0
  779.  
  780. # Enable stdin/network command interface.
  781. # network_cmd_enable = false
  782. # network_cmd_port = 55355
  783. # stdin_cmd_enable = false
  784. input_enable_hotkey = "nul"
  785. auto_remaps_enable = true
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!
 
Top