View difference between Paste ID: KHHvpvQw and
SHOW: | | - or go back to the newest paste.
1-
1+
47
2
Which statement is true about FTP implementations?
3
4
The protocol interpreter (PI) function engages once the data transfer process (DTP) function is complete.
5
6
The DTP function is responsible for the login sequence.
7
*	FTP requires two connections, one for control and one for data.
8
9
Both the PI and the DTP close automatically when the transfer is complete.
10
11
12
13
48
14
15
16
Refer to the exhibit. The network administrator needs to configure the Fa0/0 interface of RTB so that hosts from RTA can connect to the server that is attached to RTB. Which two commands will the administrator use to accomplish this task? (Choose two.)
17
18
RTB# ip address 192.168.102.98 255.255.255.248
19
20
RTB(config-if)# ip address 192.168.102.99 255.255.255.252
21
22
RTB(config)# ip address 192.168.102.97 255.255.255.252
23
24
RTB(config)# no shutdown
25
*	RTB(config-if)# no shutdown
26
*	RTB(config-if)# ip address 192.168.102.97 255.255.255.252
27
28
29
30
49
31
In a structured cable system, which term describes the cable that connects the wall jack in the user work area to the patch panel in the wiring closet?
32
*	patch cable
33
34
vertical cable
35
36
horizontal cable
37
38
backbone cable
39
40
41
42
50
43
44
45
Refer to the exhibit. The network administrator uses the command below to configure a default route on RTB: 
46
47
RTB(config)# ip route 0.0.0.0 0.0.0.0 fa0/0
48
49
A ping issued from PC3 is successful to RTB. However, echo request packets arrive at PC1 but the echo replies do not make it back to PC3. What will fix this problem?
50
51
RTA must be configured to forward packets to the 192.168.2.0 network.
52
*	The ip route command needs to be edited so that the next hop address is 10.1.1.5.
53
54
The ip route command needs to be edited so that the 192.168.2.1 address is the next hop address.
55
56
The ip route command should be removed from the RTB router configuration.
57
58
Another default route should be configured on RTA with a next hop address of 10.1.1.6.
59
60
61
62
51
63
A user reports being able to access the Internet but not being able to download e-mail from the mail server at the ISP. What should the user check on the user workstation?
64
*	the POP3 and SMTP server settings in the e-mail application
65
66
the patch cable connections at the back of the workstation and at the wall plate
67
68
the DHCP settings in the operating system
69
70
the IP address, mask, and default gateway values
71
72
the NIC drivers
73
74
75
76
52
77
78
79
Refer to the exhibit. A network administrator is troubleshooting the serial connection between R1 and R2. There is no communication between R1 and R2. Based on the output of the show ip interface brief command, what is the cause of the problem?
80
*	There is a misconfiguration of IP addresses.
81
82
There is a mismatch of encapsulation methods.
83
84
The no shutdown command has not been issued on R2.
85
86
The routing protocols are not compatible.
87
88
89
90
91
92
93
94
95
---
96
97
98
99
100
How do port filtering and access lists help provide network security? 
101
They prevent specified types of traffic from reaching specified network destinations.
102
103
104
They prevent specified types of traffic from reaching specified network destinations.(Choose two.) 
105
performance 
106
service availability 
107
108
109
Refer to the exhibit. Devices need to connect to the file server from remote networks. What method should be used to provide the file server with an IP address to allow these connections? 
110
static NAT
111
112
113
A new Cisco IOS is installed on a router in the default location. After booting, the router enters ROMMON mode. What is the reason for this? 
114
There is inadequate memory to load the Cisco IOS. 
115
116
117
Which statement correctly describes MIB? 
118
It is a database that a device keeps about itself concerning network performance parameters. 
119
120
121
What is the purpose of using the copy tftp flash command on a router? 
122
to restore the IOS image from a server 
123
124
125
Which WAN service provides point-to-point connections with a predefined communications path? 
126
leased line 
127
128
129
When selecting a WAN service, a customer estimates that it may need about 20 Mb/s of the upstream bandwidth to support various server services on the Internet. Which WAN connection should the network designer recommend? 
130
fractional T3 
131
132
133
Which protocol allows encryption of any application layer protocol? 
134
IPsec 
135
136
137
What are three features of the TCP protocol? (Choose three.) 
138
It provides retransmission of data packets if they are lost during transmission. 
139
It uses a three-way handshake between the sending and receiving systems to establish each conversation. 
140
It specifies how messages are reassembled at the destination host.
141
142
143
Refer to the exhibit. A new branch office has been added to the corporate network and a new router is to be installed to allow branch office users to access the database server at headquarters. How should the serial 0/0/0 interface of the new branch office router be configured to connect to the headquarters router? 
144
branch_23(config-if)# encapsulation ppp 
145
branch_23(config-if)# ip address 192.168.5.21 255.255.255.240 
146
branch_23(config-if)# no shutdown 
147
148
149
Which two statements are correct about the DNS hierarchy? (Choose two.) 
150
DNS relies on a hierarchy of decentralized servers to maintain records.
151
All DNS servers manage databases that store name-to-IP mappings for the entire DNS structure. 
152
153
154
For the assignment of permissions to files and folders, what does the "principle of least privilege" imply? 
155
Users only have access to resources that are necessary for their jobs. 
156
157
158
Which statement is true about FTP implementations? 
159
FTP requires two connections, one for control and one for data. 
160
161
162
What is one purpose of the TCP three-way handshake? 
163
synchronizing sequence numbers between source and destination in preparation for data transfer 
164
165
166
167
Refer to the exhibit. What is the device named "Distribution"? 
168
a switch 
169
170
171
A network administrator has designed a Class B network with a 255.255.254.0 mask. Which two statements are true for this network? (Choose two.) 
172
There are 128 subnets.
173
There are 510 usable hosts per subnet. 
174
175
176
Refer to the exhibit. R1 and R2 are configured with the commands that are displayed. All interfaces are properly configured, but neither router is receiving routing updates. What two things can be done to solve the problem? (Choose two.) 
177
Configure the routing protocol on R1 for network 10.0.0.0. 
178
Configure the routing protocol on R2 for network 10.0.0.0. 
179
180
Which cable type is used to interconnect the FastEthernet interfaces of two routers? 
181
crossover 
182
183
184
Refer to the exhibit. Host A is unable to ping R1. Which two configuration steps should be performed on R1 to solve this problem? (Choose two.) 
185
Enable the interface administratively. 
186
Configure the subnet mask on the router correctly. 
187
188
189
What are two reasons for issuing the show ip route command on a router? (Choose two.) 
190
It displays the directly connected networks. 
191
It displays the routing protocol that is receiving updates from the neighboring routers. 
192
193
194
A network engineer is asked to specify the type of cable for a new network installation. The engineer plans horizontal cable runs of less than 90 feet (27.4 meters) using cable that is not expensive and is easy to implement. It will be positioned away from electrically noisy areas to avoid EMI. Which cable should the engineer choose? 
195
UTP 
196
197
198
A new router is connected to an existing network. Which two tasks must be completed on the new router to include it in the dynamic routing process? (Choose two.) 
199
Assign an appropriate IP address and subnet mask to the serial interface. 
200
Configure a routing protocol with the directly connected network IP addresses. 
201
202
203
What is a characteristic of the EIGRP routing protocol? 
204
It builds the topology table based on all of the advertisements from its neighbors. 
205
206
207
What is the purpose of using the copy tftp flash command on a router? 
208
to restore the IOS image from a server 
209
210
211
Which two subnet masks could be used when subnetting a Class B IP address? (Choose two.) 
212
255.255.255.240 
213
255.255.192.0 
214
215
216
Which two commands ensure that any password that permits access to the privileged EXEC mode is not shown in plain text when the configuration files are displayed? (Choose two.) 
217
Router(config)# enable secret cisco 
218
Router(config)# service password-encryption 
219
220
221
Refer to the exhibit. The network administrator has configured the RTA and RTB interfaces. In order to allow hosts that are attached to RTA to reach the server that is attached to RTB, a static route from RTA to the server LAN and a default route from RTB back to RTA need to be configured. Which two commands will the administrator use to accomplish these tasks on the two routers? (Choose two.)
222
RTA(config)# ip route 10.16.10.96 255.255.255.252 10.16.10.6 
223
RTB(config)# ip route 0.0.0.0 0.0.0.0 S0/0/1 
224
225
Which routing protocol excludes the subnet information from routing updates? 
226
RIPv1 
227
228
229
230
What is a characteristic of Syslog? 
231
It enables devices to send information to a daemon that runs on a management station. 
232
233
234
As data travels through a network, a header and trailer are added and the data is placed on the medium for transmission to the next directly connected device. At which two layers of the OSI model do these activities occur? (Choose two.) 
235
physical 
236
data link 
237
238
239
Which statement is correct about passive data connections in the FTP protocol? 
240
The server forwards its IP address and a random port number to the FTP client through the control stream. 
241
242
243
A small company is contracting with an ISP to host a web server. The web administrator needs to upload files to the web server via a secure channel using FTPS. Although a ping to the server is successful, the web administrator reports that the FTPS connection cannot be established. The technician at the ISP responds that for security reasons the FTPS default port has been blocked by a firewall and the web server has been configured with a non-default port for FTPS access. At which layer of the OSI model has the security measure been applied? 
244
transport layer 
245
246
247
248
What is a feature of PAT? 
249
It allows multiple hosts on a single LAN to share globally unique IP addresses. 
250
251
252
A user calls a help desk about being unable to connect to a web server. The technician asks the user to issue a ping 127.0.0.1 command. What is the purpose of this command? 
253
verify if the TCP/IP stack is functioning on the PC 
254
255
256
Which routes are automatically added to the routing table on a neighbor router when routing protocols exchange information about directly connected networks? 
257
dynamic routes 
258
259
260
A user is able to ping IP addresses but is unable to ping hosts by domain name. What should be checked at the workstation of the user? 
261
the DNS configuration 
262
263
264
A user is attempting to do an http://www.cisco.com/ without success. Which two configuration values must be set on the host to allow this access? (Choose two.) 
265
DNS server 
266
default gateway 
267
268
269
Refer to the graphic. Which command will configure a static route on Router A to direct traffic from LAN A that is destined for LAN C? 
270
RouterA(config)# ip route 192.168.4.0 255.255.255.0 192.168.3.2 
271
272
273
Why are port numbers included in the TCP header of a segment? 
274
to enable a receiving host to forward the data to the appropriate application 
275
276
277
Refer to the exhibit. A NOC technician at an ISP enters the command c:\ping 209.165.201.7. What are two reasons to use this command? (Choose two.) 
278
test reachability to 209.165.201.7 
279
measure the time that packets take to reach 209.165.201.7 and return to the technician's workstation 
280
281
282
What is the effect of issuing the hostname RouterA command on a router? 
283
The router prompt will change from Router(config)# to RouterA(config)# 
284
285
286
A user calls the help desk to report that a Windows XP workstation is unable to connect to the network after startup and that a popup window says “This connection has limited or no connectivity.” The technician asks the user to issue the ipconfig /all command. The user reports the IP address is 169.254.69.196 with subnet mask of 255.255.0.0 and nothing is displayed for the DNS server IP address. What is the cause of the problem? 
287
The workstation is unable to obtain an IP address from a DHCP server. 
288
289
290
If the configuration register is currently set to 0x2102, what is the first action that a router will take after the bootstrap program loads successfully?
291
load the IOS from flash 
292
293
294
Refer to the exhibit. A ping 192.168.1.20 command is issued on workstation A to determine if workstation B can be reached. What two events will occur if this command is successful? (Choose two.) 
295
Workstation A will send an ICMP echo request message to workstation B. 
296
Workstation B will send an ICMP echo reply message to workstation A. 
297
298
299
An administrator wishes to protect a router by encrypting the console access password noaccess. Which command should be used? 
300
Router(config)# service password-encryption 
301
302
303
To manage a Cisco switch using Telnet, where would the management IP address be configured on the switch? 
304
VLAN 1 interface 
305
306
307
Refer to the exhibit. The network administrator has added a route by using the ip route 10.13.13.0 255.255.255.0 192.168.1.1 command on R1. Hosts on the 10.12.12.0 network cannot communicate with hosts on the 10.13.13.0 network. What is the reason for this? 
308
The static route has not been configured correctly. 
309
310
311
Refer to the exhibit. What does the highlighted value 120 represent? 
312
the administrative distance of the routing protocol 
313
314
315
Which type of address is 192.168.17.111/28? 
316
broadcast address 
317
318
319
320
321
Refer to the exhibit. The network administrator uses the command below to configure a default route on RTB: 
322
323
RTB(config)# ip route 0.0.0.0 0.0.0.0 fa0/0 
324
325
A ping issued from PC3 is successful to RTB. However, echo request packets arrive at PC1 but the echo replies do not make it back to PC3. What will fix this problem? 
326
The ip route command needs to be edited so that the next hop address is 10.1.1.5. 
327
328
329
330
Which two statements are correct about the DNS hierarchy? (Choose two.) 
331
DNS relies on a hierarchy of decentralized servers to maintain records. 
332
The root servers maintain records about how to reach top-level domain servers. 
333
334
335
336
Which two processes enable a router to determine paths to destination networks? (Choose two.) 
337
manual configuration of routes 
338
updates from other routers 
339
340
341
342
A network is spread across two buildings that are separated by a distance of 500 feet (152 meters). An electrical transformer is installed near the cable route. Which type of cable should be used in this network? 
343
fiber-optic 
344
345
346
Refer to the exhibit. What is used to exchange routing information between routers within each AS?
347
IGP routing protocols 
348
349
350
351
Refer to the exhibit. R2 is connected to the Serial0/0/1 interface of R1 and is properly configured to share routing updates with R1. Which network will R2 exclude from installing in its routing table? 
352
R 192.168.6.0/24 [120/15] via 192.168.3.2, 00:00:10, Serial0/0/0 
353
354
355
356
How does an SNMP trap aid network monitoring and management? 
357
It sends an alert message to the management station when a threshold is reached.
358
359
360
361
Refer to the exhibit. Host A is unable to ping host B. What can be done to solve this problem? (Choose two.) 
362
Configure a static route for network 10.1.2.0/24 on R2 and use exit interface S0/0/0. 
363
Configure a static route for network 10.1.1.0/24 on R1 with the next hop address as the IP address of the serial interface of R2. 
364
365
366
367
A hacker attempts to reach confidential information that is stored on a server inside the corporate network. A network security solution inspects the entire packet, determines that it is a threat, and blocks the packet from entering the inside network. Which security measure protected the network? 
368
an IPS 
369
370
371
372
Why are port numbers included in the TCP header of a segment? 
373
to enable a receiving host to forward the data to the appropriate application 
374
375
376
377
If the configuration register is currently set to 0x2102, what is the first action that a router will take after the bootstrap program loads successfully? 
378
load the IOS from flash 
379
380
381
382
Refer to the exhibit. While configuring the serial interface of a router, the network administrator sees the highlighted error message. What is the reason for this? 
383
The network administrator has attempted to configure the serial interface with a broadcast address.
384
385
386
387
How do port filtering and access lists help provide network security? 
388
They prevent specified types of traffic from reaching specified network destinations. 
389
390
391
392
Refer to the exhibit. Both R1 and R2 are performing static NAT translations for their inside networks. A packet is sent from HostA to the web server. What are the source and destination IP addresses when the frame is located at position "A" as displayed in the exhibit? 
393
Source: 172.30.20.10 Destination: 172.30.20.100 
394
395
396
397
398
Which mode does a router enter when no configuration file is located in NVRAM? 
399
setup 
400
401
402
How does a switch interface that uses sticky port security handle MAC addresses? 
403
They are configured dynamically and are saved in the running configuration. 
404
405
406
Refer to the exhibit. Based on the output of the show ip route command, how many hops are between this router and the 192.168.3.0 network? 
407
4 
408
409
410
Refer to the exhibit. A user who is connected to RTA is trying to telnet to RTB, but the connection is failing. Based on the output of the show running-config command on router RTB, why is the Telnet session failing? 
411
No password has been configured on the VTY lines. 
412
413
414
Refer to the exhibit. A network administrator configures a static default route to the Internet on RTA. Why does the route not appear in the routing table? 
415
The serial interface is not operational. 
416
417
418
A small tire retailer requires a low-cost WAN connection to its headquarters in order to manage its inventory and process customer sales in real time. Which WAN connection type is best suited to its needs? 
419
DSL 
420
421
422
A building has experienced a power outage. When the power returns, none of the devices on one floor can access the Internet. The network administrator checks the switch in the IDF that these devices are connected to and notes that the SYST LED on the front of the switch is amber. 
423
What is a possible cause of this problem?
424
The switch has failed POST. 
425
426
427
428
What is an example of a dedicated point-to-point WAN link? 
429
T1/E1 
430
431
432
Which protocol allows encryption of any application layer protocol? 
433
IPsec 
434
435
436
437
438
Refer to the exhibit. The PC tries to ping router B at 192.168.2.2, but the ping fails. What is the problem? 
439
The address of the PC is on the wrong subnet. 
440
441
442
443
The network administrator can ping a remote router but is unable to telnet to it. At what layer of the OSI model does this error occur? 
444
application 
445
446
447
Refer to the exhibit. What two conclusions can be drawn about router RTB? (Choose two.) 
448
Router RTB is connected to a Cisco 1841 router. 
449
The IP address of the router interface that is connected to router RTB is 192.168.2.6. 
450
451
452
453
Refer to the exhibit. A network administrator is troubleshooting the serial connection between R1 and R2. There is no communication between R1 and R2. Based on the output of the show ip interface brief command, what is the cause of the problem? 
454
There is a misconfiguration of IP addresses. 
455
456
457
Which two processes enable a router to determine paths to destination networks? (Choose two.) 
458
manual configuration of routes 
459
updates from other routers 
460
461
462
When using NAT on a router, what is the term for the IP address of an inside host as it appears to the outside network? 
463
inside global 
464
465
466
467
Which application can be delivered using UDP? 
468
DNS 
469
470
471
What will a router do with a packet that is destined for a host with the IP address 192.168.1.5/24 if no entry for the 192.168.24.0/24 network exists in the routing table? 
472
It will drop the packet. 
473
474
475
What should be the first step in a structured cable project? 
476
Obtain an accurate floor plan. 
477
478
479
How many host addresses may be assigned on each subnetwork when using the 130.68.0.0 network address with a subnet mask of 255.255.248.0? 
480
2046 
481
482
483
When customers use credit cards to make purchases at a small business, a modem is heard dialing a telephone number to transfer the transaction data to the central office. What type of WAN serial connection is in use? 
484
circuit switched 
485
486
487
The command copy tftp running-config has been entered on the router. What will this command do? 
488
copy the configuration file from a server to RAM 
489
490
491
A user reports being unable to access the Internet. The help desk technician employs a bottom-up approach to troubleshooting. The technician first has the user check the patch cable connection from the PC to the wall, and then has the user verify that the NIC has a green link light. What will the technician have the user do next? 
492
Verify the IP address, subnet, and gateway settings using ipconfig on the PC.
493
494
495
496
Which two statements are true about the use of the debug ip rip command on a Cisco router? (Choose two.) 
497
The debug ip rip command displays RIP routing activity in real time. 
498
Because of router processor usage, the debug ip rip command should be used only when necessary.
499
FoolishWayz33
500
CCNA Noob