Advertisement
Guest User

DriveG

a guest
Oct 16th, 2021
47
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.37 KB | None | 0 0
  1. Drive G
  2.  
  3. smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.11.0-37-generic] (local build)
  4. Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
  5.  
  6. === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
  7. Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
  8. Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
  9. Testing has begun.
  10. Please wait 116 minutes for test to complete.
  11. Test will complete after Sat Oct 16 10:02:07 2021 EDT
  12. Use smartctl -X to abort test.
  13. hal@hal:~$ sudo smartctl -a /dev/sdg
  14. [sudo] password for hal:
  15. smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.11.0-37-generic] (local build)
  16. Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
  17.  
  18. === START OF INFORMATION SECTION ===
  19. Device Model: WL1000GSA3272C
  20. Serial Number: WOL240262691
  21. LU WWN Device Id: 5 0014ee f00abd663
  22. Firmware Version: 80.00A80
  23. User Capacity: 1,000,204,886,016 bytes [1.00 TB]
  24. Sector Sizes: 512 bytes logical, 4096 bytes physical
  25. Device is: Not in smartctl database [for details use: -P showall]
  26. ATA Version is: ATA8-ACS (minor revision not indicated)
  27. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  28. Local Time is: Sat Oct 16 10:04:58 2021 EDT
  29. SMART support is: Available - device has SMART capability.
  30. SMART support is: Enabled
  31.  
  32. === START OF READ SMART DATA SECTION ===
  33. SMART overall-health self-assessment test result: PASSED
  34.  
  35. General SMART Values:
  36. Offline data collection status: (0x82) Offline data collection activity
  37. was completed without error.
  38. Auto Offline Data Collection: Enabled.
  39. Self-test execution status: ( 0) The previous self-test routine completed
  40. without error or no self-test has ever
  41. been run.
  42. Total time to complete Offline
  43. data collection: (10080) seconds.
  44. Offline data collection
  45. capabilities: (0x7b) SMART execute Offline immediate.
  46. Auto Offline data collection on/off support.
  47. Suspend Offline collection upon new
  48. command.
  49. Offline surface scan supported.
  50. Self-test supported.
  51. Conveyance Self-test supported.
  52. Selective Self-test supported.
  53. SMART capabilities: (0x0003) Saves SMART data before entering
  54. power-saving mode.
  55. Supports SMART auto save timer.
  56. Error logging capability: (0x01) Error logging supported.
  57. General Purpose Logging supported.
  58. Short self-test routine
  59. recommended polling time: ( 2) minutes.
  60. Extended self-test routine
  61. recommended polling time: ( 116) minutes.
  62. Conveyance self-test routine
  63. recommended polling time: ( 5) minutes.
  64. SCT capabilities: (0x30b5) SCT Status supported.
  65. SCT Feature Control supported.
  66. SCT Data Table supported.
  67.  
  68. SMART Attributes Data Structure revision number: 16
  69. Vendor Specific SMART Attributes with Thresholds:
  70. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  71. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1
  72. 3 Spin_Up_Time 0x0027 195 174 021 Pre-fail Always - 1241
  73. 4 Start_Stop_Count 0x0032 089 089 000 Old_age Always - 11799
  74. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  75. 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
  76. 9 Power_On_Hours 0x0032 001 001 000 Old_age Always - 75614
  77. 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  78. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  79. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 357
  80. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 266
  81. 193 Load_Cycle_Count 0x0032 197 197 000 Old_age Always - 11532
  82. 194 Temperature_Celsius 0x0022 113 100 000 Old_age Always - 30
  83. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  84. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1
  85. 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
  86. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  87. 200 Multi_Zone_Error_Rate 0x0008 200 199 000 Old_age Offline - 0
  88.  
  89. SMART Error Log Version: 1
  90. No Errors Logged
  91.  
  92. SMART Self-test log structure revision number 1
  93. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  94. # 1 Short offline Completed without error 00% 49 -
  95. # 2 Short offline Completed without error 00% 63069 -
  96. # 3 Conveyance offline Completed without error 00% 0 -
  97.  
  98. SMART Selective self-test log data structure revision number 1
  99. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  100. 1 0 0 Not_testing
  101. 2 0 0 Not_testing
  102. 3 0 0 Not_testing
  103. 4 0 0 Not_testing
  104. 5 0 0 Not_testing
  105. Selective self-test flags (0x0):
  106. After scanning selected spans, do NOT read-scan remainder of disk.
  107. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement