G0nz0uk

kibanav2

Jan 7th, 2022 (edited)
756
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
YAML 7.16 KB | None | 0 0
  1. telemetry.enabled: false
  2. telemetry.optIn: false
  3. newsfeed.enabled: false
  4.  
  5. # Kibana is served by a back end server. This setting specifies the port to use.
  6. server.port: 5601
  7.  
  8. # Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.
  9. # The default is 'localhost', which usually means remote machines will not be able to connect.
  10. # To allow connections from remote users, set this parameter to a non-loopback address.
  11. server.host: "0.0.0.0"
  12.  
  13. # Enables you to specify a path to mount Kibana at if you are running behind a proxy.
  14. # Use the `server.rewriteBasePath` setting to tell Kibana if it should remove the basePath
  15. # from requests it receives, and to prevent a deprecation warning at startup.
  16. # This setting cannot end in a slash.
  17. #server.basePath: ""
  18.  
  19. # Specifies whether Kibana should rewrite requests that are prefixed with
  20. # `server.basePath` or require that they are rewritten by your reverse proxy.
  21. # This setting was effectively always `false` before Kibana 6.3 and will
  22. # default to `true` starting in Kibana 7.0.
  23. #server.rewriteBasePath: false
  24.  
  25. # Specifies the public URL at which Kibana is available for end users. If
  26. # `server.basePath` is configured this URL should end with the same basePath.
  27. #server.publicBaseUrl: ""
  28. server.publicBaseUrl: "https://10.11.7.16:5601"
  29. #server.publicBaseUrl: "https://vmnetflow.mydomain.com:5601"
  30.  
  31. # The maximum payload size in bytes for incoming server requests.
  32. #server.maxPayload: 1048576
  33. server.maxPayload: 8388608
  34.  
  35. # The Kibana server's name.  This is used for display purposes.
  36. #server.name: "your-hostname"
  37.  
  38. # The URLs of the Elasticsearch instances to use for all your queries.
  39. #elasticsearch.hosts: ["https://10.11.7.16:9200"]
  40.  
  41. # Kibana uses an index in Elasticsearch to store saved searches, visualizations and
  42. # dashboards. Kibana creates a new index if the index doesn't already exist.
  43. #kibana.index: ".kibana"
  44.  
  45. # The default application to load.
  46. #kibana.defaultAppId: "home"
  47.  
  48. # If your Elasticsearch is protected with basic authentication, these settings provide
  49. # the username and password that the Kibana server uses to perform maintenance on the Kibana
  50. # index at startup. Your Kibana users still need to authenticate with Elasticsearch, which
  51. # is proxied through the Kibana server.
  52. #elasticsearch.username: "kibana_system"
  53. #elasticsearch.password: "pass"
  54.  
  55. # Kibana can also authenticate to Elasticsearch via "service account tokens".
  56. # If may use this token instead of a username/password.
  57. # elasticsearch.serviceAccountToken: "my_token"
  58.  
  59. # Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.
  60. # These settings enable SSL for outgoing requests from the Kibana server to the browser.
  61. #server.ssl.enabled: false
  62. #server.ssl.certificate: /path/to/your/server.crt
  63. #server.ssl.key: /path/to/your/server.key
  64.  
  65. # Optional settings that provide the paths to the PEM-format SSL certificate and key files.
  66. # These files are used to verify the identity of Kibana to Elasticsearch and are required when
  67. # xpack.security.http.ssl.client_authentication in Elasticsearch is set to required.
  68. #elasticsearch.ssl.certificate: /path/to/your/client.crt
  69. #elasticsearch.ssl.key: /path/to/your/client.key
  70.  
  71. # Optional setting that enables you to specify a path to the PEM file for the certificate
  72. # authority for your Elasticsearch instance.
  73. #elasticsearch.ssl.certificateAuthorities: [ "/path/to/your/CA.pem" ]
  74.  
  75. # To disregard the validity of SSL certificates, change this setting's value to 'none'.
  76. #elasticsearch.ssl.verificationMode: full
  77.  
  78. server.ssl.enabled: true
  79. #server.ssl.certificateAuthorities: /etc/kibana/certs/ca/ca.crt
  80. #server.ssl.key: /etc/kibana/certs/svr-elastiflow/svr-elastiflow.key
  81. #server.ssl.certificate: /etc/kibana/certs/svr-elastiflow/svr-elastiflow.crt
  82. server.ssl.certificateAuthorities: /etc/kibana/certs/ca/camydomain.cer
  83. server.ssl.key: /etc/kibana/certs/svr-elastiflow/vmnetflow_mydomain_com.key
  84. server.ssl.certificate: /etc/kibana/certs/svr-elastiflow/vmnetflow_mydomain_com.crt
  85.  
  86. #elasticsearch.hosts: ['https://vmnetflow.mydomain.com:9200']
  87. elasticsearch.hosts: ['https://10.11.7.16:9200']
  88. elasticsearch.username: 'kibana_system'
  89. elasticsearch.password: 'password123'
  90. #elasticsearch.ssl.certificateAuthorities: /etc/kibana/certs/ca/ca.crt
  91. #elasticsearch.ssl.key: /etc/kibana/certs/svr-elastiflow/svr-elastiflow.key
  92. #elasticsearch.ssl.certificate: /etc/kibana/certs/svr-elastiflow/svr-elastiflow.crt
  93.  
  94. elasticsearch.ssl.verificationMode: 'certificate'
  95. elasticsearch.ssl.certificateAuthorities: /etc/kibana/certs/ca/camydomain.cer
  96. elasticsearch.ssl.key: /etc/kibana/certs/svr-elastiflow/vmnetflow_mydomain_com.key
  97. elasticsearch.ssl.certificate: /etc/kibana/certs/svr-elastiflow/vmnetflow_mydomain_com.crt
  98.  
  99. elasticsearch.requestTimeout: 132000
  100. elasticsearch.shardTimeout: 120000
  101.  
  102. kibana.autocompleteTimeout: 2000
  103. kibana.autocompleteTerminateAfter: 500000
  104.  
  105. monitoring.enabled: true
  106. monitoring.kibana.collection.enabled: true
  107. monitoring.kibana.collection.interval: 30000
  108.  
  109. monitoring.ui.enabled: true
  110. monitoring.ui.min_interval_seconds: 20
  111.  
  112. xpack.maps.showMapVisualizationTypes: true
  113.  
  114. xpack.security.enabled: true
  115. xpack.security.audit.enabled: false
  116.  
  117. xpack.encryptedSavedObjects.encryptionKey: 'ElastiFlow_0123456789_0123456789_0123456789'
  118.  
  119. # Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of
  120. # the elasticsearch.requestTimeout setting.
  121. #elasticsearch.pingTimeout: 1500
  122.  
  123. # Time in milliseconds to wait for responses from the back end or Elasticsearch. This value
  124. # must be a positive integer.
  125. #elasticsearch.requestTimeout: 30000
  126.  
  127. # List of Kibana client-side headers to send to Elasticsearch. To send *no* client-side
  128. # headers, set this value to [] (an empty list).
  129. #elasticsearch.requestHeadersWhitelist: [ authorization ]
  130.  
  131. # Header names and values that are sent to Elasticsearch. Any custom headers cannot be overwritten
  132. # by client-side headers, regardless of the elasticsearch.requestHeadersWhitelist configuration.
  133. #elasticsearch.customHeaders: {}
  134.  
  135. # Time in milliseconds for Elasticsearch to wait for responses from shards. Set to 0 to disable.
  136. #elasticsearch.shardTimeout: 30000
  137.  
  138. # Logs queries sent to Elasticsearch. Requires logging.verbose set to true.
  139. #elasticsearch.logQueries: false
  140.  
  141. # Specifies the path where Kibana creates the process ID file.
  142. #pid.file: /run/kibana/kibana.pid
  143.  
  144. # Enables you to specify a file where Kibana stores log output.
  145. #logging.dest: stdout
  146.  
  147. # Set the value of this setting to true to suppress all logging output.
  148. #logging.silent: false
  149.  
  150. # Set the value of this setting to true to suppress all logging output other than error messages.
  151. #logging.quiet: false
  152.  
  153. # Set the value of this setting to true to log all events, including system usage information
  154. # and all requests.
  155. #logging.verbose: false
  156.  
  157. # Set the interval in milliseconds to sample system and process performance
  158. # metrics. Minimum is 100ms. Defaults to 5000.
  159. #ops.interval: 5000
  160.  
  161. # Specifies locale to be used for all localizable strings, dates and number formats.
  162. # Supported languages are the following: English - en , by default , Chinese - zh-CN .
  163. #i18n.locale: "en"
  164.  
Add Comment
Please, Sign In to add comment