Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2017.07-28529-g18ff28f (Sep 29 2017 - 09:55:53 -0700), Build: jenkins-uboot_v2017.07-41
- CPU: Freescale i.MX6Q rev1.2 at 792 MHz
- Reset cause: POR
- Board: nitrogen6x
- I2C: ready
- DRAM: 1 GiB
- MMC: FSL_SDHC: 0, FSL_SDHC: 1
- SF: Detected sst25vf016b with page size 256 Bytes, erase size 4 KiB, total 2 MiB
- Display: lcd:CLAA-WVGA (800x480)
- In: serial
- Out: serial
- Err: serial
- Net: Micrel ksz9021 at 6
- FEC [PRIME], usb_ether
- Hit any key to stop autoboot: 3 2 1 0
- AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
- flags: ncq stag pm led clo only pmp pio slum part
- No port device detected!
- ** Bad device size - sata 0 **
- AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
- flags: ncq stag pm led clo only pmp pio slum part
- No port device detected!
- ** Bad device sata 1 **
- switch to partitions #0, OK
- mmc0 is current device
- 4355 bytes read in 16 ms (265.6 KiB/s)
- ## Executing script at 10008000
- ** File not found uEnv.txt **
- 49232 bytes read in 10 ms (4.7 MiB/s)
- only CEA modes allowed on HDMI port
- btmac=00:19:b8:b2:aa:e8
- 8586360 bytes read in 429 ms (19.1 MiB/s)
- 1637188 bytes read in 82 ms (19 MiB/s)
- Kernel image @ 0x10800000 [ 0x000000 - 0x830478 ]
- ## Loading init Ramdisk from Legacy Image at 13800000 ...
- Image Name: RAM Disk
- Image Type: ARM Linux RAMDisk Image (gzip compressed)
- Data Size: 1637124 Bytes = 1.6 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 13000000
- Booting using the fdt blob at 0x13000000
- reserving fdt memory region: addr=13000000 size=d000
- Using Device Tree in place at 13000000, end 1300ffff
- Starting kernel ...
- Booting Linux on physical CPU 0x0
- Initializing cgroup subsys cpu
- Initializing cgroup subsys cpuacct
- Linux version 4.1.15-g1101548 (jenkins@bdbuild) (gcc version 4.9 20150123 (prerelease) (GCC) ) #15 SMP PREEMPT Thu Aug 24 16:32:28 UTC 2017
- CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- Machine model: Freescale i.MX6 Quad Nitrogen6x Board
- cma: Reserved 320 MiB at 0x32000000
- Memory policy: Data cache writealloc
- PERCPU: Embedded 13 pages/cpu @f66fe000 s22336 r8192 d22720 u53248
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260128
- Kernel command line: mxc_hdmi.only_cea=1 tsc2004.calibration=-67247,-764,272499173,324,69283,-8653010,65536 console=ttymxc1,115200 vmalloc=128M consoleblank=0 rootwait androidboot.hardware=freescale androidboot.bootdev=mmcblk0 androidboot.serialno=19b802aae8 wlcore.mac=00:19:b8:82:aa:e8 androidboot.wlan.mac=00:19:b8:82:aa:e8 androidboot.btmacaddr=00:19:b8:b2:aa:e8 cma=320M
- PID hash table entries: 4096 (order: 2, 16384 bytes)
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Memory: 689092K/1047552K available (11264K kernel code, 1064K rwdata, 3988K rodata, 1024K init, 628K bss, 30780K reserved, 327680K cma-reserved, 146432K highmem)
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- vmalloc : 0xf7800000 - 0xff000000 ( 120 MB)
- lowmem : 0xc0000000 - 0xf7000000 ( 880 MB)
- pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- .text : 0xc0008000 - 0xc0c00000 (12256 kB)
- .init : 0xc1100000 - 0xc1200000 (1024 kB)
- .data : 0xc1200000 - 0xc130a218 (1065 kB)
- .bss : 0xc130a218 - 0xc13a723c ( 629 kB)
- SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- Preemptible hierarchical RCU implementation.
- Additional per-CPU info printed with stalls.
- NR_IRQS:16 nr_irqs:16 16
- L2C-310 erratum 769419 enabled
- L2C-310 enabling early BRESP for Cortex-A9
- L2C-310 full line of zeros enabled for Cortex-A9
- L2C-310 ID prefetch enabled, offset 16 lines
- L2C-310 dynamic clock gating enabled, standby mode enabled
- L2C-310 cache controller enabled, 16 ways, 1024 kB
- L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
- mxc_clocksource_init 3000000
- Switching to timer-based delay loop, resolution 333ns
- sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
- clocksource mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
- Console: colour dummy device 80x30
- Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
- pid_max: default: 32768 minimum: 301
- Security Framework initialized
- SELinux: Initializing.
- AppArmor: AppArmor disabled by boot time parameter
- Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- Initializing cgroup subsys freezer
- Initializing cgroup subsys debug
- CPU: Testing write buffer coherency: ok
- CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- Setting up static identity map for 0x10100000 - 0x10100058
- CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- Brought up 4 CPUs
- SMP: Total of 4 processors activated (24.00 BogoMIPS).
- CPU: All CPU(s) started in SVC mode.
- devtmpfs: initialized
- VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- pinctrl core: initialized pinctrl subsystem
- NET: Registered protocol family 16
- DMA: preallocated 256 KiB pool for atomic coherent allocations
- cpuidle: using governor ladder
- cpuidle: using governor menu
- CPU identified as i.MX6Q, silicon rev 1.2
- hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- hw-breakpoint: maximum watchpoint size is 4 bytes.
- imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
- imx-gpc 20dc000.gpc: no fsl,ldo-bypass found!
- mxs-dma 110000.dma-apbh: initialized
- 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 25, base_baud = 5000000) is a IMX
- 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 301, base_baud = 5000000) is a IMX
- console [ttymxc1] enabled
- 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 302, base_baud = 5000000) is a IMX
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- 2000000.aips-bus:usbphy_nop1 supply vcc not found, using dummy regulator
- 2000000.aips-bus:usbphy_nop2 supply vcc not found, using dummy regulator
- imx-i2c 21a0000.i2c: stop-delay=0, inter-byte-delay=0
- i2c i2c-0: IMX I2C adapter registered
- i2c i2c-0: can't use DMA
- imx-i2c 21a4000.i2c: stop-delay=0, inter-byte-delay=0
- i2c i2c-1: IMX I2C adapter registered
- i2c i2c-1: can't use DMA
- imx-i2c 21a8000.i2c: stop-delay=0, inter-byte-delay=0
- i2c i2c-2: IMX I2C adapter registered
- i2c i2c-2: can't use DMA
- Linux video capture interface: v2.00
- pps_core: LinuxPPS API ver. 1 registered
- pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- PTP clock support registered
- imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
- imx-ipuv3 2800000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
- mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 driver probed
- mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 dphy version is 0x3130302a
- MIPI CSI2 driver module loaded
- Advanced Linux Sound Architecture Driver Initialized.
- Bluetooth: Core ver 2.20
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: SCO socket layer initialized
- Switched to clocksource mxc_timer1
- NET: Registered protocol family 2
- TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- TCP: Hash tables configured (established 8192 bind 8192)
- UDP hash table entries: 512 (order: 2, 16384 bytes)
- UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- NET: Registered protocol family 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 1600K (c3800000 - c3990000)
- CPU PMU: Failed to parse /soc/pmu/interrupt-affinity[0]
- hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
- imx rpmsg driver is registered.
- Bus freq driver module loaded
- console [pstore-1] enabled
- pstore: Registered ramoops as persistent store backend
- ramoops: attached 0x100000@0x4bf00000, ecc: 0/0
- mxc_ramoops device success loaded
- futex hash table entries: 1024 (order: 4, 65536 bytes)
- audit: initializing netlink subsys (disabled)
- audit: type=2000 audit(1.070:1): initialized
- VFS: Disk quotas dquot_6.6.0
- VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- NFS: Registering the id_resolver key type
- Key type id_resolver registered
- Key type id_legacy registered
- ntfs: driver 2.1.32 [Flags: R/W DEBUG].
- fuse init (API version 7.23)
- bounce: pool size: 64 pages
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- MIPI DSI driver module loaded
- ldb 2000000.aips-bus:ldb@020e0008: failed to find valid LVDS channel
- ldb: probe of 2000000.aips-bus:ldb@020e0008 failed with error -22
- 20e0000.hdmi_video supply HDMI not found, using dummy regulator
- mxc_sdc_fb fb@1: registered mxc display driver lcd
- mxc_sdc_fb fb@1: 800x480 h_sync,r,l: 20,60,40 v_sync,l,u: 10,10,10 pixclock=27000000 Hz
- imx-ipuv3 2400000.ipu: ipu1_di0_pre_sel=540000000
- imx-ipuv3 2400000.ipu: use special clk parent
- imx-ipuv3 2400000.ipu: disp=0, pixel_clk=27000000 27000000 parent=108000000 div=4
- find_field: [0] = 0x5fc, max=23
- find_field: [1] = 0xbfc, max=23
- find_field: [2] = 0x11fc, max=23
- find_field: [0] = 0x820, max=29
- mxc_sdc_fb fb@1: 800x480 h_sync,r,l: 20,60,40 v_sync,l,u: 10,10,10 pixclock=27000000 Hz
- imx-ipuv3 2400000.ipu: ipu1_di0_pre_sel=540000000
- imx-ipuv3 2400000.ipu: use special clk parent
- imx-ipuv3 2400000.ipu: disp=0, pixel_clk=27000000 27000000 parent=108000000 div=4
- Console: switching to colour frame buffer device 100x30
- add tfp410 i2c driver
- imx-sdma 20ec000.sdma: no iram assigned, using external mem
- imx-sdma 20ec000.sdma: no event needs to be remapped
- imx-sdma 20ec000.sdma: loaded firmware 3.3
- imx-sdma 20ec000.sdma: initialized
- max7w-uart: version 1.0
- driver magdecode registered
- imx sema4 driver is registered.
- [drm] Initialized drm 1.1.0 20060810
- [drm] Initialized vivante 1.0.0 20120216 on minor 0
- brd: module loaded
- loop: module loaded
- zram: Created 1 device(s)
- (stk) :sysfs entries created
- (hci_tty): inside hci_tty_init
- (hci_tty): allocated 244, 0
- [max77823_init] start
- ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024
- ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480
- ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000
- ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
- ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
- ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
- ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
- scsi host0: ahci-imx
- ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 312
- m25p80 spi0.0: sst25vf016b (2048 Kbytes)
- 3 ofpart partitions found on MTD device spi0.0
- Creating 3 MTD partitions on "spi0.0":
- 0x000000000000-0x0000000c0000 : "U-Boot"
- 0x0000000c0000-0x0000000c2000 : "env"
- 0x0000000c2000-0x000000200000 : "splash"
- spi_imx 2008000.ecspi: probed
- tun: Universal TUN/TAP device driver, 1.6
- tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- CAN device driver interface
- 2090000.flexcan supply xceiver not found, using dummy regulator
- flexcan 2090000.flexcan: device registered (reg_base=f7ad0000, irq=34)
- 2188000.ethernet supply phy not found, using dummy regulator
- pps pps0: new PPS source ptp0
- libphy: fec_enet_mii_bus: probed
- mdio_bus 2188000.ethernet: /soc/aips-bus@02100000/ethernet@02188000/mdio/ethernet-phy has invalid PHY address
- fec 2188000.ethernet eth0: registered PHC device 0
- PPP generic driver version 2.4.2
- PPP BSD Compression module registered
- PPP Deflate Compression module registered
- PPP MPPE Compression module registered
- NET: Registered protocol family 24
- pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
- usbcore: registered new interface driver pegasus
- usbcore: registered new interface driver rtl8150
- usbcore: registered new interface driver r8152
- usbcore: registered new interface driver asix
- usbcore: registered new interface driver ax88179_178a
- usbcore: registered new interface driver cdc_ether
- usbcore: registered new interface driver cdc_eem
- usbcore: registered new interface driver smsc95xx
- usbcore: registered new interface driver net1080
- usbcore: registered new interface driver cdc_subset
- usbcore: registered new interface driver zaurus
- usbcore: registered new interface driver cdc_ncm
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci-pci: EHCI PCI platform driver
- ehci-mxc: Freescale On-Chip EHCI Host driver
- usbcore: registered new interface driver cdc_acm
- cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- usbcore: registered new interface driver usb-storage
- usbcore: registered new interface driver usbserial
- usbcore: registered new interface driver usbserial_generic
- usbserial: USB Serial support registered for generic
- usbcore: registered new interface driver cp210x
- usbserial: USB Serial support registered for cp210x
- usbcore: registered new interface driver ftdi_sio
- usbserial: USB Serial support registered for FTDI USB Serial Device
- usbcore: registered new interface driver keyspan
- usbserial: USB Serial support registered for Keyspan - (without firmware)
- usbserial: USB Serial support registered for Keyspan 1 port adapter
- usbserial: USB Serial support registered for Keyspan 2 port adapter
- usbserial: USB Serial support registered for Keyspan 4 port adapter
- usbcore: registered new interface driver option
- usbserial: USB Serial support registered for GSM modem (1-port)
- usbcore: registered new interface driver pl2303
- usbserial: USB Serial support registered for pl2303
- usbcore: registered new interface driver qcserial
- usbserial: USB Serial support registered for Qualcomm USB modem
- usbcore: registered new interface driver usb_ehset_test
- 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
- setup_reset_gpios:-2, flags 0
- setup_reset_gpios:204, flags 1
- setup_reset_gpios:-2, flags 0
- 2184200.usb supply vbus not found, using dummy regulator
- ci_hdrc ci_hdrc.1: EHCI Host Controller
- ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
- ata1: SATA link down (SStatus 0 SControl 300)
- ahci-imx 2200000.sata: no device found, disabling link.
- ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug
- ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- mousedev: PS/2 mouse device common for all mice
- usbcore: registered new interface driver xpad
- usbcore: registered new interface driver usb_acecad
- usbcore: registered new interface driver aiptek
- usbcore: registered new interface driver gtco
- usbcore: registered new interface driver hanwang
- usbcore: registered new interface driver kbtab
- egalax_ts 2-0004: Failed to read firmware version
- egalax_ts: probe of 2-0004 failed with error -5
- ft5x06-ts 2-0038: reset fffffffe
- ft5x06-ts 2-0038: Could not detect touch screen -19.
- Goodix-TS 2-0014: i2c test failed attempt 1: -5
- Goodix-TS 2-0014: i2c test failed attempt 2: -5
- Goodix-TS 2-0014: I2C communication failure: -5
- Goodix-TS: probe of 2-0014 failed with error -5
- Goodix-TS 2-005d: i2c test failed attempt 1: -5
- usb 1-1: new high-speed USB device number 2 using ci_hdrc
- Goodix-TS 2-005d: i2c test failed attempt 2: -5
- Goodix-TS 2-005d: I2C communication failure: -5
- Goodix-TS: probe of 2-005d failed with error -5
- ili210x_i2c 2-0041: No platform data!
- ili210x_i2c 2-0041: i2c transfer failed
- ili210x_i2c 2-0041: Failed to get firmware version, err: -5
- ili210x_i2c: probe of 2-0041 failed with error -5
- setup_reset_gpio:-2
- setup_irq_gpio:116
- input: tsc2004 as /devices/virtual/input/input0
- rtc-isl1208 0-006f: chip found, driver version 0.3
- rtc-isl1208 0-006f: rtc core: registered rtc-isl1208 as rtc0
- check_alarm_past: alarm in the past
- snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1
- i2c /dev entries driver
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 3 ports detected
- update_device_addr: ov5642 ret=-5
- ov5642_read_reg:write reg error:reg=300a
- camera ov5642 is not found
- tc358743_mipi 1-000f: no sensor pwdn pin available
- 1-000f supply DGPO not found, using dummy regulator
- tc358743_read_reg:reg=0 ret=-5
- tc358743_probe:cannot find camera
- tc358743_probe: failed, error=-19
- adv7180 2-0020: adv7180_get_gpios: pwn-gpios flags(1 -> 0)
- adv7180 2-0020: adv7180_get_gpios: rst-gpios flags(1 -> 0)
- adv7180_gpio_state: active=0, rst-gpios(78)=0x1
- adv7180_probe: cea861=0
- adv7180_gpio_state: active=0, pwn-gpios(77)=0x1
- adv7180 2-0020: get mclk failed
- adv7180 2-0020: adv7180_read:read reg error: reg=11 ret=-5
- adv7180: probe of 2-0020 failed with error -5
- ov5640_read_reg:write reg error:reg=300a
- camera ov5640 is not found
- mxc_v4l2_output v4l2_out: V4L2 device registered as video16
- mxc_v4l2_output v4l2_out: V4L2 device registered as video17
- usbcore: registered new interface driver uvcvideo
- USB Video Class driver (1.1.1)
- fake_poweroff_probe: found watchdog 20bc000.wdog
- imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
- Bluetooth: HCI UART driver ver 2.3
- Bluetooth: HCI UART protocol H4 registered
- Bluetooth: HCI UART protocol LL registered
- usbcore: registered new interface driver btusb
- (stc): chnl_id list empty :4 sdhci: Secure Digital Host Controller Interface driver
- sdhci: Copyright(c) Pierre Ossman
- sdhci-pltfm: SDHCI platform and OF driver helper
- /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified
- sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found
- (stk) : st_kim_startmmc2: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
- /soc/aips-bus@02100000/usdhc@02198000: voltage-ranges unspecified
- sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
- (stk) :ldisc_install = 1
- sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO
- sdhci-esdhc-imx 2194000.usdhc: card claims to support voltages below defined range
- sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found
- mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
- mmc2: new SDIO card at address 0001
- mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
- /soc/aips-bus@02100000/usdhc@0219c000: voltage-ranges unspecified
- sdhci-esdhc-imx 219c000.usdhc: could not get ultra high speed state, work on normal mode
- sdhci-esdhc-imx 219c000.usdhc: Got CD GPIO
- sdhci-esdhc-imx 219c000.usdhc: No vqmmc regulator found
- mmc0: host does not support reading read-only switch, assuming write-enable
- mmc1: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA
- mxc_vpu 2040000.vpu_fsl: VPU initialized
- mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
- Galcore version 6.2.0.79565
- mmc0: new high speed SDHC card at address aaaa
- mmcblk0: mmc0:aaaa SU16G 14.8 GiB
- GPT:Primary header thinks Alt. header is not at the end of the disk.
- GPT:7372799 != 31116287
- GPT:Alternate GPT header not at the end of the disk.
- GPT:7372799 != 31116287
- GPT: Use GNU Parted to correct GPT errors.
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
- caam 2100000.caam: Entropy delay = 3200
- caam 2100000.caam: Instantiated RNG4 SH0
- caam 2100000.caam: Instantiated RNG4 SH1
- caam 2100000.caam: device ID = 0x0a16010000000000 (Era -524)
- caam 2100000.caam: job rings = 2, qi = 0
- caam algorithms registered in /proc/crypto
- caam_jr 2101000.jr0: registering rng-caam
- caam_keyblob caam_keyblob: caam keyblob initialized
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- ashmem: initialized
- max77823_fuelgauge_init:
- max77823_charger_init :
- usbcore: registered new interface driver snd-usb-audio
- sgtl5000 0-000a: sgtl5000 revision 0x11
- sgtl5000 0-000a: Using internal LDO instead of VDDD: check ER1
- fsl-hdmi-dai soc:hdmi_audio@00120000: failed to probe. Load HDMI-video first.
- fsl-hdmi-dai: probe of soc:hdmi_audio@00120000 failed with error -12
- imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok
- imx-audio-hdmi sound-hdmi: initialize HDMI-audio failed. load HDMI-video first!
- NET: Registered protocol family 26
- u32 classifier
- Actions configured
- Netfilter messages via NETLINK v0.30.
- nf_conntrack version 0.5.0 (15912 buckets, 63648 max)
- ctnetlink v0.93: registering with nfnetlink.
- xt_time: kernel timezone is -0000
- ip_tables: (C) 2000-2006 Netfilter Core Team
- arp_tables: (C) 2002 David S. Miller
- Initializing XFRM netlink socket
- NET: Registered protocol family 10
- mip6: Mobile IPv6
- ip6_tables: (C) 2000-2006 Netfilter Core Team
- sit: IPv6 over IPv4 tunneling driver
- NET: Registered protocol family 17
- NET: Registered protocol family 15
- can: controller area network core (rev 20120528 abi 9)
- (stk) :ldisc installation timeout
- (stk) :ldisc_install = 0
- NET: Registered protocol family 29
- can: raw protocol (rev 20120528)
- can: broadcast manager protocol (rev 20120528 t)
- can: netlink gateway (rev 20130117) max_hops=1
- Bluetooth: RFCOMM TTY layer initialized
- Bluetooth: RFCOMM socket layer initialized
- Bluetooth: RFCOMM ver 1.11
- Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- Bluetooth: BNEP filters: protocol multicast
- Bluetooth: BNEP socket layer initialized
- Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- Bluetooth: HIDP socket layer initialized
- 8021q: 802.1Q VLAN Support v1.8
- Key type dns_resolver registered
- imx6q-pcie 1ffc000.pcie: phy link never came up
- imx6q-pcie 1ffc000.pcie: failed to initialize host
- imx6q-pcie: probe of 1ffc000.pcie failed with error -22
- update_device_addr: ov5640_mipi ret=-5
- ov5640_read_reg(mipi):reg=300a ret=-5
- camera ov5640_mipi is not found
- input: gpio-keys as /devices/soc0/gpio-keys/input/input1
- rtc-isl1208 0-006f: setting system clock to 2017-10-12 10:53:43 UTC (1507805623)
- wlan-en: disabling
- usb_otg_vbus: disabling
- ALSA device list:
- #0: sgtl5000-audio
- Freeing unused kernel memory: 1024K (c1100000 - c1200000)
- init: init first stage started!
- audit: type=1403 audit(1507805623.610:2): policy loaded auid=4294967295 ses=4294967295
- audit: type=1404 audit(1507805623.620:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
- init: (Initializing SELinux enforcing took 0.17s.)
- init: init second stage started!
- init: Running restorecon...
- init: waitpid failed: No child processes
- init: (Loading properties from /default.prop took 0.00s.)
- init: (Parsing /init.environ.rc took 0.00s.)
- init: (Parsing /init.usb.rc took 0.00s.)
- init: (Parsing init.freescale.usb.rc took 0.00s.)
- init: (Parsing init.freescale.i.MX6Q.rc took 0.00s.)
- init: (Parsing init.bt-wlan.rc took 0.00s.)
- init: (Parsing /init.freescale.rc took 0.02s.)
- init: (Parsing /init.usb.configfs.rc took 0.00s.)
- init: (Parsing /init.zygote32.rc took 0.00s.)
- init: (Parsing /init.rc took 0.04s.)
- init: Starting service 'ueventd'...
- init: Waiting for /dev/.coldboot_done...
- ueventd: ueventd started!
- (stk) : timed out waiting for ldisc to be un-installed
- (stk) :ldisc_install = 1ueventd: Coldboot took 0.29s.
- init: Waiting for /dev/.coldboot_done took 0.30s.
- init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
- init: Starting service 'watchdogd'...
- Console: switching to colour dummy device 80x30
- watchdogd: started (interval 10, margin 20)!
- fs_mgr: boot device base == mmcblk0
- EXT4-fs (mmcblk0p1): ext4_check_descriptors: Checksum for group 0 failed (18911!=55765)
- EXT4-fs (mmcblk0p1): group descriptors corrupted!
- fs_mgr: __mount(source=/dev/block/mmcblk0p1,target=/boot,type=ext4)=-1
- fs_mgr: Failed to mount an un-encryptable or wiped partition on/dev/block/mmcblk0p1 at /boot options: errors=remount-ro error: Invalid argument
- EXT4-fs (mmcblk0p2): Unrecognized mount option "" or missing value
- EXT4-fs (mmcblk0p2): failed to parse options in superblock:
- EXT4-fs (mmcblk0p2): ext4_check_descriptors: Block bitmap for group 0 not in group (block 0)!
- EXT4-fs (mmcblk0p2): group descriptors corrupted!
- fs_mgr: __mount(source=/dev/block/mmcblk0p2,target=/recovery,type=ext4)=-1
- fs_mgr: Failed to mount an un-encryptable or wiped partition on/dev/block/mmcblk0p2 at /recovery options: errors=remount-ro error: Invalid argument
- EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
- fs_mgr: __mount(source=/dev/block/mmcblk0p5,target=/system,type=ext4)=0
- EXT4-fs (mmcblk0p4): recovery complete
- EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,errors=panic
- fs_mgr: __mount(source=/dev/block/mmcblk0p4,target=/data,type=ext4)=0
- EXT4-fs (mmcblk0p6): recovery complete
- EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
- fs_mgr: __mount(source=/dev/block/mmcblk0p6,target=/cache,type=ext4)=0
- EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
- fs_mgr: __mount(source=/dev/block/mmcblk0p7,target=/vendor,type=ext4)=0
- init: fs_mgr_mount_all returned an error
- init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
- init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
- init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
- init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
- init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)
- init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
- init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
- init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
- init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
- init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)
- init: (Parsing /system/etc/init/installd.rc took 0.00s.)
- init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
- init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
- init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)
- init: (Parsing /system/etc/init/logd.rc took 0.00s.)
- init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
- init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
- init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
- init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
- init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
- init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
- init: (Parsing /system/etc/init/netd.rc took 0.00s.)
- init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.)
- init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
- init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
- init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
- init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
- init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
- init: (Parsing /system/etc/init/vold.rc took 0.00s.)
- init: fs_mgr_mount_all returned unexpected error 255
- file system registered
- init: Starting service 'logd'...
- zram0: detected capacity change from 0 to 314572800
- random: logd urandom read with 29 bits of entropy available
- logd.auditd: start
- logd.klogd: 5901730667
- Adding 307196k swap on /dev/block/zram0. Priority:-1 extents:1 across:307196k SS
- init: (Loading properties from /system/build.prop took 0.00s.)
- init: (Loading properties from /vendor/build.prop took 0.00s.)
- init: (Loading properties from /factory/factory.prop took 0.00s.)
- init: Starting service 'debuggerd'...
- init: do_start: Service debuggerd64 not found
- init: Starting service 'vold'...
- init: Not bootcharting.
- (stk) :ldisc installation timeout
- (stk) :ldisc_install = 0fs_mgr: boot device base == mmcblk0
- init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...
- init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 217) exited with status 0
- init: (Loading properties from /data/local.prop took 0.00s.)
- init: Starting service 'logd-reinit'...
- init: Starting service 'healthd'...
- init: Starting service 'uim'...
- init: Starting service 'lmkd'...
- binder: 219:219 transaction failed 29189, size 0-0
- init: Starting service 'servicemanager'...
- logd.daemon: reinit
- init: Starting service 'surfaceflinger'...
- init: Service 'logd-reinit' (pid 218) exited with status 0
- init: write_file: Unable to open '/sys/block/mmcblk1/queue/read_ahead_kb': No such file or directory
- init: Starting service 'console'...
- init: Starting service 'adbd'...
- read descriptors
- read descriptors
- read strings
- nitrogen6x:/ # (stk) : timed out waiting for ldisc to be un-installed
- (stk) :ldisc_install = 1(stc): st_tty_open
- (stk) :line discipline installed(stk) :ti-connectivity/TIInit_7.6.15.bts
- kim bt_kim: Direct firmware load for ti-connectivity/TIInit_7.6.15.bts failed with error -2
- kim bt_kim: Falling back to user helper
- (stk) :change remote baud rate command in firmware
- (stk) :skipping the wait event of change remote baudmxc_sdc_fb fb@1: 800x480 h_sync,r,l: 20,60,40 v_sync,l,u: 10,10,10 pixclock=27000000 Hz
- imx-ipuv3 2400000.ipu: ipu1_di0_pre_sel=540000000
- imx-ipuv3 2400000.ipu: use special clk parent
- imx-ipuv3 2400000.ipu: disp=0, pixel_clk=27000000 27000000 parent=108000000 div=4
- healthd: No battery devices found
- init: Starting service 'bootanim'...
- (stc): add_channel_to_table: id 4
- (stc): add_channel_to_table: id 2
- (stc): add_channel_to_table: id 3
- (stc): remove_channel_from_table: id 3
- (stc): remove_channel_from_table: id 2
- (stc): remove_channel_from_table: id 4
- (stc): all chnl_ids unregistered
- (stk) :ldisc_install = 0(stc): st_tty_close
- type=1400 audit(1507805629.100:4): avc: denied { read } for pid=242 comm="bootanimation" name="psched" dev="proc" ino=4026531969 scontext=u:r:bootanim:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=0
- random: nonblocking pool is initialized
- nitrogen6x:/ #
- nitrogen6x:/ #
- nitrogen6x:/ #
- nitrogen6x:/ #
- nitrogen6x:/ #
- nitrogen6x:/ #
- nitrogen6x:/ # logcat
- --------- beginning of main
- 10-12 10:53:40.030 200 200 W auditd : type=2000 audit(0.0:1): initialized
- 10-12 10:53:43.610 200 200 I auditd : type=1403 audit(0.0:2): policy loaded auid=4294967295 ses=4294967295
- 10-12 10:53:43.620 200 200 W auditd : type=1404 audit(0.0:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
- 10-12 10:53:45.001 207 207 I : debuggerd: starting
- --------- beginning of system
- 10-12 10:53:45.128 208 208 I vold : Vold 3.0 (the awakening) firing up
- 10-12 10:53:45.129 208 208 V vold : Detected support for: exfat ext4 f2fs ntfs vfat
- 10-12 10:53:45.139 208 208 W Vold : Tearing down stale mount /mnt/shm
- 10-12 10:53:45.469 208 213 V vold : /system/bin/sgdisk
- 10-12 10:53:45.469 208 213 V vold : --android-dump
- 10-12 10:53:45.469 208 213 V vold : /dev/block/vold/disk:179_0
- 10-12 10:53:45.473 208 216 D vold : e4crypt_init_user0
- 10-12 10:53:45.473 208 216 D vold : e4crypt_prepare_user_storage for volume null, user 0, serial 0, flags 1
- 10-12 10:53:45.473 208 216 D vold : Preparing: /data/system/users/0
- 10-12 10:53:45.480 208 216 D vold : Preparing: /data/misc/profiles/cur/0
- 10-12 10:53:45.484 208 216 D vold : Preparing: /data/misc/profiles/cur/0/foreign-dex
- 10-12 10:53:45.485 208 216 D vold : Preparing: /data/system_de/0
- 10-12 10:53:45.485 208 216 D vold : Preparing: /data/misc_de/0
- 10-12 10:53:45.486 208 216 D vold : Preparing: /data/user_de/0
- 10-12 10:53:45.487 208 216 D vold : e4crypt_unlock_user_key 0 serial=0 token_present=0
- 10-12 10:53:45.492 208 216 E vold : Failed to chmod /data/system_ce/0: No such file or directory
- 10-12 10:53:45.493 208 216 E vold : Failed to chmod /data/misc_ce/0: No such file or directory
- 10-12 10:53:45.493 208 216 E vold : Failed to chmod /data/media/0: No such file or directory
- 10-12 10:53:45.494 1 1 I vdc : 200 211 Command succeeded
- 10-12 10:53:45.532 217 217 I /system/bin/tzdatacheck: tzdata file /data/misc/zoneinfo/current/tzdata does not exist. No action required.
- 10-12 10:53:45.549 208 213 V vold : DISK gpt 3672EA4D-0124-466D-8ACE-595D8B66E5D9
- 10-12 10:53:45.549 208 213 V vold :
- 10-12 10:53:45.549 208 213 V vold : PART 1 0FC63DAF-8483-4772-8E79-3D69D8477DE4 2F564B47-DE35-4127-B6F3-1171C81E06B1 boot
- 10-12 10:53:45.549 208 213 V vold :
- 10-12 10:53:45.549 208 213 V vold : PART 2 0FC63DAF-8483-4772-8E79-3D69D8477DE4 A1F073C7-7A5F-42B1-9052-C9A04354DFF7 recovery
- 10-12 10:53:45.549 208 213 V vold :
- 10-12 10:53:45.549 208 213 V vold : PART 3 0FC63DAF-8483-4772-8E79-3D69D8477DE4 978592ED-CC52-40A6-9496-DE6DBD866F3E extended
- 10-12 10:53:45.549 208 213 V vold :
- 10-12 10:53:45.549 208 213 V vold : PART 4 0FC63DAF-8483-4772-8E79-3D69D8477DE4 98F847A1-5B80-4707-8E03-C4EF5328D666 data
- 10-12 10:53:45.549 208 213 V vold :
- 10-12 10:53:45.549 208 213 V vold : PART 5 0FC63DAF-8483-4772-8E79-3D69D8477DE4 09354596-BFA0-45BE-AE14-D184802018A5 system
- 10-12 10:53:45.549 208 213 V vold :
- 10-12 10:53:45.549 208 213 V vold : PART 6 0FC63DAF-8483-4772-8E79-3D69D8477DE4 7457D9D1-4392-4ADB-9554-073F3AB1D39B cache
- 10-12 10:53:45.549 208 213 V vold :
- 10-12 10:53:45.549 208 213 V vold : PART 7 0FC63DAF-8483-4772-8E79-3D69D8477DE4 AD8B179E-729B-477D-9E82-4F8A24B2B062 vendor
- 10-12 10:53:45.549 208 213 V vold :
- 10-12 10:53:45.549 208 213 V vold : PART 8 0FC63DAF-8483-4772-8E79-3D69D8477DE4 C57DBC0F-A5AE-42FD-B62A-CD93DF0BFE0C misc
- 10-12 10:53:45.549 208 213 V vold :
- 10-12 10:53:45.549 208 213 V vold : PART 9 0FC63DAF-8483-4772-8E79-3D69D8477DE4 90FA5A69-6A6D-4735-9076-D2559D66457F crypt
- 10-12 10:53:45.549 208 213 V vold :
- 10-12 10:53:45.550 208 213 W vold : disk:179_0 is ignoring partition 9 beyond max supported devices
- 10-12 10:53:45.610 221 221 I lowmemorykiller: Using in-kernel low memory killer interface
- 10-12 10:53:45.738 223 223 I SurfaceFlinger: SurfaceFlinger is starting
- 10-12 10:53:45.738 223 223 I SurfaceFlinger: SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
- 10-12 10:53:45.809 223 223 D libEGL : loaded /system/lib/egl/libEGL_VIVANTE.so
- 10-12 10:53:46.092 223 223 D libEGL : loaded /system/lib/egl/libGLESv1_CM_VIVANTE.so
- 10-12 10:53:46.165 220 220 E uim-sysfs: uim:opening /dev/ttymxc2, while already open
- 10-12 10:53:46.263 223 223 D libEGL : loaded /system/lib/egl/libGLESv2_VIVANTE.so
- 10-12 10:53:46.418 223 223 I imx6.gralloc: open gpu gralloc module!
- 10-12 10:53:46.422 223 223 I imx6.gralloc: fb_device_open dispid:0, fb:0
- 10-12 10:53:46.474 223 223 I imx6.gralloc: 16bpp setting of Framebuffer with RGB565 format!
- 10-12 10:53:46.474 223 223 W imx6.gralloc: using (fd=12)
- 10-12 10:53:46.474 223 223 W imx6.gralloc: id = DISP3 BG
- 10-12 10:53:46.474 223 223 W imx6.gralloc: xres = 800 px
- 10-12 10:53:46.474 223 223 W imx6.gralloc: yres = 480 px
- 10-12 10:53:46.474 223 223 W imx6.gralloc: xres_virtual = 800 px
- 10-12 10:53:46.474 223 223 W imx6.gralloc: yres_virtual = 1440 px
- 10-12 10:53:46.474 223 223 W imx6.gralloc: bpp = 16
- 10-12 10:53:46.474 223 223 W imx6.gralloc: r = 11:5
- 10-12 10:53:46.474 223 223 W imx6.gralloc: g = 5:6
- 10-12 10:53:46.474 223 223 W imx6.gralloc: b = 0:5
- 10-12 10:53:46.474 223 223 W imx6.gralloc: width = 127 mm (160.000000 dpi)
- 10-12 10:53:46.474 223 223 W imx6.gralloc: height = 76 mm (160.421051 dpi)
- 10-12 10:53:46.474 223 223 W imx6.gralloc: refresh rate = 57.54 Hz
- 10-12 10:53:46.487 223 223 I FslHwcomposer: using fsl hwc!!!
- 10-12 10:53:46.488 223 223 I FslHwcomposer: hwc_device_open,579
- 10-12 10:53:46.488 223 223 I FslHwcomposer: using fsl hwc!
- 10-12 10:53:46.488 223 223 I FslHwcomposer: fb0 is lcd
- 10-12 10:53:46.488 223 223 I FslHwcomposer: device
- 10-12 10:53:46.488 223 223 I FslHwcomposer: fb1 is overlay device
- 10-12 10:53:46.488 223 223 W FslHwcomposer: open /sys/class/graphics/fb2 failed
- 10-12 10:53:46.488 223 223 W FslHwcomposer: open /sys/class/graphics/fb3 failed
- 10-12 10:53:46.488 223 223 W FslHwcomposer: open /sys/class/graphics/fb4 failed
- 10-12 10:53:46.488 223 223 W FslHwcomposer: open /sys/class/graphics/fb5 failed
- 10-12 10:53:46.489 223 223 I FslHwcomposer: hwcomposer: open framebuffer fb0
- 10-12 10:53:46.489 223 223 I imx6.gralloc: fb_device_open dispid:0, fb:0
- 10-12 10:53:46.489 223 223 I imx6.gralloc: display already initialized...
- 10-12 10:53:46.489 223 223 I FslHwcomposer: hwc_device_open,426
- 10-12 10:53:46.489 223 223 I SurfaceFlinger: Using composer version 1.3
- 10-12 10:53:46.489 223 223 E FslHwcomposer: unknown display attribute 6
- 10-12 10:53:46.489 223 223 W SurfaceFlinger: no suitable EGLConfig found, trying a simpler query
- 10-12 10:53:46.489 223 223 I SurfaceFlinger: EGL information:
- 10-12 10:53:46.489 223 223 I SurfaceFlinger: vendor : Android
- 10-12 10:53:46.489 223 223 I SurfaceFlinger: version : 1.4 Android META-EGL
- 10-12 10:53:46.489 223 223 I SurfaceFlinger: extensions: EGL_KHR_get_all_proc_addresses EGL_ANDROID_presentation_time EGL_KHR_swap_buffers_with_damage EGL_ANDROID_create_native_client_buffer EGL_ANDROID_front_buffer_auto_refresh EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_pixmap EGL_KHR_lock_surface EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_reusable_sync EGL_KHR_fence_sync EGL_KHR_create_context EGL_KHR_surfaceless_context EGL_EXT_create_context_robustness EGL_ANDROID_image_native_buffer EGL_KHR_wait_sync EGL_ANDROID_recordable EGL_EXT_buffer_age
- 10-12 10:53:46.489 223 223 I SurfaceFlinger: Client API: OpenGL_ES
- 10-12 10:53:46.489 223 223 I SurfaceFlinger: EGLSurface: 5-6-5-0, config=0x1
- 10-12 10:53:46.534 223 223 I SurfaceFlinger: OpenGL ES informations:
- 10-12 10:53:46.534 223 223 I SurfaceFlinger: vendor : Vivante Corporation
- 10-12 10:53:46.534 223 223 I SurfaceFlinger: renderer : Vivante GC2000
- 10-12 10:53:46.534 223 223 I SurfaceFlinger: version : OpenGL ES 3.0 V6.2.0.p2.79565
- 10-12 10:53:46.534 223 223 I SurfaceFlinger: extensions: GL_EXT_debug_marker GL_OES_vertex_type_10_10_10_2 GL_OES_vertex_half_float GL_OES_element_index_uint GL_OES_mapbuffer GL_OES_vertex_array_object GL_OES_compressed_ETC1_RGB8_texture GL_OES_compressed_paletted_texture GL_OES_texture_npot GL_OES_rgb8_rgba8 GL_OES_depth_texture GL_OES_depth_texture_cube_map GL_OES_depth24 GL_OES_depth32 GL_OES_packed_depth_stencil GL_OES_fbo_render_mipmap GL_OES_get_program_binary GL_OES_fragment_precision_high GL_OES_standard_derivatives GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_EGL_sync GL_OES_required_internalformat GL_OES_surfaceless_context GL_OES_texture_half_float GL_OES_texture_float GL_EXT_texture_type_2_10_10_10_REV GL_EXT_texture_filter_anisotropic GL_EXT_texture_format_BGRA8888 GL_EXT_read_format_bgra GL_EXT_multi_draw_arrays GL_EXT_frag_depth GL_EXT_discard_framebuffer GL_EXT_blend_minmax GL_EXT_multisampled_render_to_texture GL_EXT_robustness GL_EXT_texture_sRGB_decode GL_EXT_texture_rg GL_VIV_direct_texture
- 10-12 10:53:46.534 223 223 I SurfaceFlinger: GL_MAX_TEXTURE_SIZE = 8192
- 10-12 10:53:46.534 223 223 I SurfaceFlinger: GL_MAX_VIEWPORT_DIMS = 8192
- 10-12 10:53:46.535 223 223 E cutils-trace: Error opening trace file: Permission denied (13)
- 10-12 10:53:46.537 223 223 I imx6.gralloc: fb_device_open dispid:0, fb:0
- 10-12 10:53:46.537 223 223 I imx6.gralloc: display already initialized...
- 10-12 10:53:46.537 223 223 I v_egl : FramebufferSurface: bufferCount=3
- 10-12 10:53:46.537 223 223 E libEGL : eglSetSwapRectangleANDROID:1984 error 300d (EGL_BAD_SURFACE)
- 10-12 10:53:46.814 223 223 D SurfaceFlinger: shader cache generated - 24 shaders in 275.163330 ms
- 10-12 10:53:46.821 223 223 D SurfaceFlinger: Set power mode=2, type=0 flinger=0xad8b2000
- 10-12 10:53:46.834 223 223 I FslHwcomposer: prepare: targetHandle is null
- 10-12 10:53:49.100 242 242 W bootanimation: type=1400 audit(0.0:4): avc: denied { read } for name="psched" dev="proc" ino=4026531969 scontext=u:r:bootanim:s0 tcontext=u:object_r:proc_net:s0 tclass=file permissive=0
- 10-12 10:53:49.465 242 246 D libEGL : loaded /system/lib/egl/libEGL_VIVANTE.so
- 10-12 10:53:49.504 242 246 D libEGL : loaded /system/lib/egl/libGLESv1_CM_VIVANTE.so
- 10-12 10:53:49.720 242 246 D libEGL : loaded /system/lib/egl/libGLESv2_VIVANTE.so
- 10-12 10:53:49.893 242 246 E cutils-trace: Error opening trace file: Permission denied (13)
- 10-12 10:53:49.897 242 246 I imx6.gralloc: open gpu gralloc module!
- ^C
- 130|nitrogen6x:/ #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement