Advertisement
Guest User

sdb

a guest
Nov 3rd, 2011
148
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.46 KB | None | 0 0
  1. smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
  2. Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: SAMSUNG SpinPoint S250 series
  6. Device Model: SAMSUNG HD250HJ
  7. Serial Number: S0URJ9DPB83725
  8. Firmware Version: FH100-05
  9. User Capacity: 250 059 350 016 bytes
  10. Device is: In smartctl database [for details use: -P show]
  11. ATA Version is: 8
  12. ATA Standard is: ATA-8-ACS revision 3b
  13. Local Time is: Tue Nov 1 18:54:12 2011 MSK
  14. SMART support is: Available - device has SMART capability.
  15. SMART support is: Enabled
  16.  
  17. === START OF READ SMART DATA SECTION ===
  18. SMART overall-health self-assessment test result: PASSED
  19.  
  20. General SMART Values:
  21. Offline data collection status: (0x02) Offline data collection activity
  22. was completed without error.
  23. Auto Offline Data Collection: Disabled.
  24. Self-test execution status: ( 0) The previous self-test routine completed
  25. without error or no self-test has ever
  26. been run.
  27. Total time to complete Offline
  28. data collection: (3528) seconds.
  29. Offline data collection
  30. capabilities: (0x5b) SMART execute Offline immediate.
  31. Auto Offline data collection on/off support.
  32. Suspend Offline collection upon new
  33. command.
  34. Offline surface scan supported.
  35. Self-test supported.
  36. No Conveyance Self-test supported.
  37. Selective Self-test supported.
  38. SMART capabilities: (0x0003) Saves SMART data before entering
  39. power-saving mode.
  40. Supports SMART auto save timer.
  41. Error logging capability: (0x01) Error logging supported.
  42. General Purpose Logging supported.
  43. Short self-test routine
  44. recommended polling time: ( 2) minutes.
  45. Extended self-test routine
  46. recommended polling time: ( 59) minutes.
  47. SCT capabilities: (0x003f) SCT Status supported.
  48. SCT Error Recovery Control supported.
  49. SCT Feature Control supported.
  50. SCT Data Table supported.
  51.  
  52. SMART Attributes Data Structure revision number: 16
  53. Vendor Specific SMART Attributes with Thresholds:
  54. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  55. 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
  56. 3 Spin_Up_Time 0x0007 253 253 025 Pre-fail Always - 4416
  57. 4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 4749
  58. 5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
  59. 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
  60. 8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0
  61. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8554
  62. 10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0
  63. 11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always - 0
  64. 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2809
  65. 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 326069
  66. 184 End-to-End_Error 0x0033 253 253 099 Pre-fail Always - 0
  67. 187 Reported_Uncorrect 0x0032 253 253 000 Old_age Always - 131072
  68. 188 Command_Timeout 0x0032 253 253 000 Old_age Always - 0
  69. 190 Airflow_Temperature_Cel 0x0022 136 118 000 Old_age Always - 34 (Lifetime Min/Max 11/40)
  70. 194 Temperature_Celsius 0x0022 133 115 000 Old_age Always - 35 (Lifetime Min/Max 11/41)
  71. 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 326069
  72. 196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0
  73. 197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always - 0
  74. 198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
  75. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  76. 200 Multi_Zone_Error_Rate 0x000a 253 100 000 Old_age Always - 0
  77. 201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always - 0
  78. 202 Data_Address_Mark_Errs 0x0032 100 100 000 Old_age Always - 1
  79.  
  80. SMART Error Log Version: 1
  81. No Errors Logged
  82.  
  83. SMART Self-test log structure revision number 1
  84. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  85.  
  86.  
  87. Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
  88. SMART Selective self-test log data structure revision number 0
  89. Note: revision number not 1 implies that no selective self-test has ever been run
  90. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  91. 1 0 0 Not_testing
  92. 2 0 0 Not_testing
  93. 3 0 0 Not_testing
  94. 4 0 0 Not_testing
  95. 5 0 0 Not_testing
  96. Selective self-test flags (0x0):
  97. After scanning selected spans, do NOT read-scan remainder of disk.
  98. If Selective self-test is pending on power-up, resume after 0 minute delay.
  99.  
  100. thomas@debian-mangos:~$
  101. thomas@debian-mangos:~$ cat sdb
  102. smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
  103. Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
  104.  
  105. === START OF INFORMATION SECTION ===
  106. Model Family: SAMSUNG SpinPoint S250 series
  107. Device Model: SAMSUNG HD250HJ
  108. Serial Number: S0URJ9DPB83725
  109. Firmware Version: FH100-05
  110. User Capacity: 250 059 350 016 bytes
  111. Device is: In smartctl database [for details use: -P show]
  112. ATA Version is: 8
  113. ATA Standard is: ATA-8-ACS revision 3b
  114. Local Time is: Tue Nov 1 18:54:12 2011 MSK
  115. SMART support is: Available - device has SMART capability.
  116. SMART support is: Enabled
  117.  
  118. === START OF READ SMART DATA SECTION ===
  119. SMART overall-health self-assessment test result: PASSED
  120.  
  121. General SMART Values:
  122. Offline data collection status: (0x02) Offline data collection activity
  123. was completed without error.
  124. Auto Offline Data Collection: Disabled.
  125. Self-test execution status: ( 0) The previous self-test routine completed
  126. without error or no self-test has ever
  127. been run.
  128. Total time to complete Offline
  129. data collection: (3528) seconds.
  130. Offline data collection
  131. capabilities: (0x5b) SMART execute Offline immediate.
  132. Auto Offline data collection on/off support.
  133. Suspend Offline collection upon new
  134. command.
  135. Offline surface scan supported.
  136. Self-test supported.
  137. No Conveyance Self-test supported.
  138. Selective Self-test supported.
  139. SMART capabilities: (0x0003) Saves SMART data before entering
  140. power-saving mode.
  141. Supports SMART auto save timer.
  142. Error logging capability: (0x01) Error logging supported.
  143. General Purpose Logging supported.
  144. Short self-test routine
  145. recommended polling time: ( 2) minutes.
  146. Extended self-test routine
  147. recommended polling time: ( 59) minutes.
  148. SCT capabilities: (0x003f) SCT Status supported.
  149. SCT Error Recovery Control supported.
  150. SCT Feature Control supported.
  151. SCT Data Table supported.
  152.  
  153. SMART Attributes Data Structure revision number: 16
  154. Vendor Specific SMART Attributes with Thresholds:
  155. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  156. 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
  157. 3 Spin_Up_Time 0x0007 253 253 025 Pre-fail Always - 4416
  158. 4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 4749
  159. 5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
  160. 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
  161. 8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0
  162. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8554
  163. 10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0
  164. 11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always - 0
  165. 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2809
  166. 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 326069
  167. 184 End-to-End_Error 0x0033 253 253 099 Pre-fail Always - 0
  168. 187 Reported_Uncorrect 0x0032 253 253 000 Old_age Always - 131072
  169. 188 Command_Timeout 0x0032 253 253 000 Old_age Always - 0
  170. 190 Airflow_Temperature_Cel 0x0022 136 118 000 Old_age Always - 34 (Lifetime Min/Max 11/40)
  171. 194 Temperature_Celsius 0x0022 133 115 000 Old_age Always - 35 (Lifetime Min/Max 11/41)
  172. 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 326069
  173. 196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0
  174. 197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always - 0
  175. 198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
  176. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  177. 200 Multi_Zone_Error_Rate 0x000a 253 100 000 Old_age Always - 0
  178. 201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always - 0
  179. 202 Data_Address_Mark_Errs 0x0032 100 100 000 Old_age Always - 1
  180.  
  181. SMART Error Log Version: 1
  182. No Errors Logged
  183.  
  184. SMART Self-test log structure revision number 1
  185. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  186.  
  187.  
  188. Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
  189. SMART Selective self-test log data structure revision number 0
  190. Note: revision number not 1 implies that no selective self-test has ever been run
  191. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  192. 1 0 0 Not_testing
  193. 2 0 0 Not_testing
  194. 3 0 0 Not_testing
  195. 4 0 0 Not_testing
  196. 5 0 0 Not_testing
  197. Selective self-test flags (0x0):
  198. After scanning selected spans, do NOT read-scan remainder of disk.
  199. If Selective self-test is pending on power-up, resume after 0 minute delay.
  200.  
  201.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement