Guest User

Untitled

a guest
Dec 30th, 2021
20
223 days
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 3.14.28 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #1 SMP Thu Dec 26 03:12:28 KST 2019
  3. [ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
  4. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  5. [ 0.000000] Machine model: BCM97252SSAT_V00
  6. [ 0.000000] moving dtb from 0x0000000007628000 to 0x000000000092dbb0
  7. [ 0.000000] cma: Reserved 504 MiB at 0x0000000010000000
  8. [ 0.000000] cma: Reserved 260 MiB at 0x000000002f800000
  9. [ 0.000000] cma: Reserved 1020 MiB at 0x0000000080000000
  10. [ 0.000000] cma: Reserved 16 MiB at 0x000000000f000000
  11. [ 0.000000] Memory policy: Data cache writealloc
  12. [ 0.000000] On node 0 totalpages: 524288
  13. [ 0.000000] free_area_init_node: node 0, pgdat c08ee4c0, node_mem_map cd7f2000
  14. [ 0.000000] Normal zone: 512 pages used for memmap
  15. [ 0.000000] Normal zone: 0 pages reserved
  16. [ 0.000000] Normal zone: 65536 pages, LIFO batch:15
  17. [ 0.000000] HighMem zone: 5632 pages used for memmap
  18. [ 0.000000] HighMem zone: 458752 pages, LIFO batch:31
  19. [ 0.000000] MCP: Enabling write pairing
  20. [ 0.000000] PERCPU: Embedded 8 pages/cpu @cd7c0000 s9536 r8192 d15040 u32768
  21. [ 0.000000] pcpu-alloc: s9536 r8192 d15040 u32768 alloc=8*4096
  22. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  23. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523776
  24. [ 0.000000] Kernel command line: root=/dev/mmcblk0p4 rootwait rw rootwait=data=journal debug,nolock coherent_pool=2M brcm_cma=504M@0x10000000 brcm_cma=260M@0x2f800000 brcm_cma=1020M@0x80000000 hwtypenum=264
  25. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  26. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  27. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  28. [ 0.000000] Memory: 219484K/2097152K available (6532K kernel code, 342K rwdata, 2020K rodata, 265K init, 200K bss, 34468K reserved, 1843200K cma-reserved, 0K highmem)
  29. [ 0.000000] Virtual kernel memory layout:
  30. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  31. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  32. [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
  33. [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  34. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  35. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  36. [ 0.000000] .text : 0xc0008000 - 0xc08625fc (8554 kB)
  37. [ 0.000000] .init : 0xc0863000 - 0xc08a5540 ( 266 kB)
  38. [ 0.000000] .data : 0xc08a6000 - 0xc08fb8f0 ( 343 kB)
  39. [ 0.000000] .bss : 0xc08fb8f8 - 0xc092dbb0 ( 201 kB)
  40. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  41. [ 0.000000] Hierarchical RCU implementation.
  42. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  43. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  44. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  45. [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93)
  46. [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
  47. [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95)
  48. [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58)
  49. [ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
  50. [ 0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
  51. [ 0.000009] Switching to timer-based delay loop
  52. [ 0.000211] Console: colour dummy device 80x30
  53. [ 0.000229] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
  54. [ 0.000237] pid_max: default: 32768 minimum: 301
  55. [ 0.000326] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  56. [ 0.000331] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  57. [ 0.005957] CPU: Testing write buffer coherency: ok
  58. [ 0.006155] CPU0: update cpu_power 1024
  59. [ 0.006161] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  60. [ 0.006329] Setting up static identity map for 0x63cb90 - 0x63cbe8
  61. [ 0.008570] CPU1: Booted secondary processor
  62. [ 0.008589] CPU1: update cpu_power 1024
  63. [ 0.008593] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  64. [ 0.008653] Brought up 2 CPUs
  65. [ 0.008661] SMP: Total of 2 processors activated.
  66. [ 0.008666] CPU: All CPU(s) started in SVC mode.
  67. [ 0.009000] devtmpfs: initialized
  68. [ 0.012396] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
  69. [ 0.039422] regulator-dummy: no parameters
  70. [ 0.039640] NET: Registered protocol family 16
  71. [ 0.040846] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  72. [ 0.041576] cpuidle: using governor ladder
  73. [ 0.041582] cpuidle: using governor menu
  74. [ 0.044009] irq: no irq domain found for /rdb/interrupt-controller@f040a700 !
  75. [ 0.044142] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
  76. [ 0.047291] irq: no irq domain found for /rdb/interrupt-controller@f03e1a00 !
  77. [ 0.047520] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] registered
  78. [ 0.047653] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered
  79. [ 0.047802] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered
  80. [ 0.047942] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered
  81. [ 0.048078] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered
  82. [ 0.048205] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered
  83. [ 0.048335] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered
  84. [ 0.048479] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
  85. [ 0.048600] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
  86. [ 0.048719] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered
  87. [ 0.048837] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered
  88. [ 0.048971] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered
  89. [ 0.049542] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
  90. [ 0.050020] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered
  91. [ 0.050163] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered
  92. [ 0.050663] No ATAGs?
  93. [ 0.050681] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  94. [ 0.050686] hw-breakpoint: maximum watchpoint size is 8 bytes.
  95. [ 0.050851] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
  96. [ 0.065115] bio: create slab <bio-0> at 0
  97. [ 0.065697] SCSI subsystem initialized
  98. [ 0.065868] libata version 3.00 loaded.
  99. [ 0.066220] usbcore: registered new interface driver usbfs
  100. [ 0.066288] usbcore: registered new interface driver hub
  101. [ 0.066382] usbcore: registered new device driver usb
  102. [ 0.066504] Linux video capture interface: v2.00
  103. [ 0.066692] pps_core: LinuxPPS API ver. 1 registered
  104. [ 0.066696] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  105. [ 0.066745] PTP clock support registered
  106. [ 0.067613] Advanced Linux Sound Architecture Driver Initialized.
  107. [ 0.068306] cfg80211: Calling CRDA to update world regulatory domain
  108. [ 0.068796] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
  109. [ 0.068978] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT
  110. [ 0.169280] brcm-pci f0460000.pcie: link down
  111. [ 0.269305] brcm-pci f0490000.pcie: link down
  112. [ 0.269347] Switched to clocksource arch_sys_counter
  113. [ 0.269501] FS-Cache: Loaded
  114. [ 0.277384] NET: Registered protocol family 2
  115. [ 0.277751] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  116. [ 0.277766] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  117. [ 0.277787] TCP: Hash tables configured (established 2048 bind 2048)
  118. [ 0.277833] TCP: reno registered
  119. [ 0.277839] UDP hash table entries: 256 (order: 1, 8192 bytes)
  120. [ 0.277850] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  121. [ 0.277951] NET: Registered protocol family 1
  122. [ 0.278134] RPC: Registered named UNIX socket transport module.
  123. [ 0.278139] RPC: Registered udp transport module.
  124. [ 0.278142] RPC: Registered tcp transport module.
  125. [ 0.278145] RPC: Registered tcp NFSv4.1 backchannel transport module.
  126. [ 0.278152] PCI: CLS 0 bytes, default 64
  127. [ 0.278415] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
  128. [ 0.279451] futex hash table entries: 512 (order: 3, 32768 bytes)
  129. [ 0.285507] bounce pool size: 64 pages
  130. [ 0.291337] FS-Cache: Netfs 'nfs' registered for caching
  131. [ 0.291662] NFS: Registering the id_resolver key type
  132. [ 0.291683] Key type id_resolver registered
  133. [ 0.291687] Key type id_legacy registered
  134. [ 0.291697] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  135. [ 0.291701] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  136. [ 0.291919] FS-Cache: Netfs 'cifs' registered for caching
  137. [ 0.292141] Key type cifs.spnego registered
  138. [ 0.292289] fuse init (API version 7.22)
  139. [ 0.292880] SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled
  140. [ 0.294123] msgmni has been set to 460
  141. [ 0.294749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  142. [ 0.294756] io scheduler noop registered
  143. [ 0.294770] io scheduler cfq registered (default)
  144. [ 0.295011] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
  145. [ 0.361738] brcm-cma brcm-cma.0: Initialized Broadcom CMA root device
  146. [ 0.362303] brcm-cma brcm-cma.0: Added CMA device @ PA=0x10000000 LEN=0x1f800000
  147. [ 0.372903] brcm-cma brcm-cma.0: Pre-allocated 0x1f800000 bytes @ 0x10000000
  148. [ 0.373492] brcm-cma brcm-cma.1: Added CMA device @ PA=0x2f800000 LEN=0x10400000
  149. [ 0.379020] brcm-cma brcm-cma.1: Pre-allocated 0x10400000 bytes @ 0x2f800000
  150. [ 0.379616] brcm-cma brcm-cma.2: Added CMA device @ PA=0x80000000 LEN=0x3fc00000
  151. [ 0.399436] brcm-cma brcm-cma.2: Pre-allocated 0x3fc00000 bytes @ 0x80000000
  152. [ 0.399862] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  153. [ 0.401343] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
  154. [ 1.263715] console [ttyS0] enabled
  155. [ 1.267614] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) is a 16550A
  156. [ 1.276933] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) is a 16550A
  157. [ 1.291308] brd: module loaded
  158. [ 1.296952] loop: module loaded
  159. [ 1.300753] ahci brcmstb-ahci.0: can't get clock
  160. [ 1.305477] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
  161. [ 1.322363] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  162. [ 1.330992] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part
  163. [ 1.340458] scsi0 : ahci_platform
  164. [ 1.344088] scsi1 : ahci_platform
  165. [ 1.347622] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
  166. [ 1.355553] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
  167. [ 1.364726] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
  168. [ 1.371121] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
  169. [ 1.378439] m25p80 spi32766.0: found gd25q32, expected m25p80
  170. [ 1.384215] m25p80 spi32766.0: gd25q32 (4096 Kbytes)
  171. [ 1.389208] 5 ofpart partitions found on MTD device spi32766.0
  172. [ 1.395050] Creating 5 MTD partitions on "spi32766.0":
  173. [ 1.400198] 0x000000000000-0x000000200000 : "flash0.bolt"
  174. [ 1.406273] 0x000000200000-0x000000210000 : "flash0.macadr"
  175. [ 1.412480] 0x000000210000-0x000000220000 : "flash0.nvram"
  176. [ 1.418565] 0x000000220000-0x000000230000 : "flash0.devtree"
  177. [ 1.424799] 0x000000000000-0x000000400000 : "flash0"
  178. [ 1.431299] libphy: Fixed MDIO Bus: probed
  179. [ 1.436067] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
  180. [ 1.452352] libphy: bcmgenet MII bus: probed
  181. [ 1.474360] ata1: SATA link down (SStatus 0 SControl 300)
  182. [ 1.480955] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
  183. [ 1.486803] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
  184. [ 1.493266] xhci-brcm: xHCI BRCM driver
  185. [ 1.497203] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
  186. [ 1.503079] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
  187. [ 1.511166] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
  188. [ 1.517860] hub 1-0:1.0: USB hub found
  189. [ 1.521647] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
  190. [ 1.528910] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
  191. [ 1.534716] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
  192. [ 1.542968] hub 2-0:1.0: USB hub found
  193. [ 1.546740] hub 2-0:1.0: 2 ports detected
  194. [ 1.551107] ehci-brcm: EHCI BRCM driver
  195. [ 1.555037] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
  196. [ 1.560844] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
  197. [ 1.578803] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
  198. [ 1.590355] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
  199. [ 1.596991] hub 3-0:1.0: USB hub found
  200. [ 1.600764] hub 3-0:1.0: 1 port detected
  201. [ 1.604887] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
  202. [ 1.607361] ata2: SATA link down (SStatus 0 SControl 300)
  203. [ 1.616114] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
  204. [ 1.634068] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
  205. [ 1.645354] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
  206. [ 1.651977] hub 4-0:1.0: USB hub found
  207. [ 1.655750] hub 4-0:1.0: 1 port detected
  208. [ 1.659975] ohci-brcm: OHCI BRCM driver
  209. [ 1.663891] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
  210. [ 1.669691] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
  211. [ 1.677570] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
  212. [ 1.738843] hub 5-0:1.0: USB hub found
  213. [ 1.742616] hub 5-0:1.0: 1 port detected
  214. [ 1.746732] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
  215. [ 1.752551] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
  216. [ 1.760457] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
  217. [ 1.821761] hub 6-0:1.0: USB hub found
  218. [ 1.825533] hub 6-0:1.0: 1 port detected
  219. [ 1.829746] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  220. [ 1.836294] ehci-pci: EHCI PCI platform driver
  221. [ 1.840829] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  222. [ 1.847051] ohci-pci: OHCI PCI platform driver
  223. [ 1.851763] usbcore: registered new interface driver usb-storage
  224. [ 1.857918] mousedev: PS/2 mouse device common for all mice
  225. [ 1.863845] i2c /dev entries driver
  226. [ 1.867662] IR NEC protocol handler initialized
  227. [ 1.872205] IR RC5(x) protocol handler initialized
  228. [ 1.877004] IR RC6 protocol handler initialized
  229. [ 1.881540] IR JVC protocol handler initialized
  230. [ 1.886077] IR Sony protocol handler initialized
  231. [ 1.890701] IR RC5 (streamzap) protocol handler initialized
  232. [ 1.896280] IR SANYO protocol handler initialized
  233. [ 1.900991] IR MCE Keyboard/mouse protocol handler initialized
  234. [ 1.907013] cpufreq_cpu0: failed to get cpu0 regulator: -19
  235. [ 1.912826] sdhci: Secure Digital Host Controller Interface driver
  236. [ 1.919018] sdhci: Copyright(c) Pierre Ossman
  237. [ 1.923382] sdhci-pltfm: SDHCI platform and OF driver helper
  238. [ 1.930188] mmc0: no vqmmc regulator found
  239. [ 1.934296] mmc0: no vmmc regulator found
  240. [ 1.969355] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
  241. [ 1.977832] mmc1: no vqmmc regulator found
  242. [ 1.981938] mmc1: no vmmc regulator found
  243. [ 2.017355] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
  244. [ 2.025014] hidraw: raw HID events driver (C) Jiri Kosina
  245. [ 2.035802] usbcore: registered new interface driver usbhid
  246. [ 2.041389] usbhid: USB HID core driver
  247. [ 2.045847] TCP: cubic registered
  248. [ 2.049605] NET: Registered protocol family 10
  249. [ 2.058586] NET: Registered protocol family 17
  250. [ 2.063332] Key type dns_resolver registered
  251. [ 2.069732] Registering SWP/SWPB emulation handler
  252. [ 2.078986] regulator-dummy: disabling
  253. [ 2.093120] ALSA device list:
  254. [ 2.096118] No soundcards found.
  255. [ 2.099831] Waiting for root device /dev/mmcblk0p4...
  256. [ 2.128993] mmc1: BKOPS_EN bit is not set
  257. [ 2.139212] mmc1: new high speed MMC card at address 0001
  258. [ 2.144955] mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
  259. [ 2.149598] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
  260. [ 2.155609] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
  261. [ 2.161626] mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
  262. [ 2.170597] mmcblk0: p1 p2 p3 p4
  263. [ 2.176720] mmcblk0boot1: unknown partition table
  264. [ 2.182307] mmcblk0boot0: unknown partition table
  265. [ 2.603077] EXT4-fs (mmcblk0p4): warning: maximal mount count reached, running e2fsck is recommended
  266. [ 2.613042] EXT4-fs (mmcblk0p4): recovery complete
  267. [ 2.618534] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
  268. [ 2.626659] VFS: Mounted root (ext4 filesystem) on device 179:4.
  269. [ 2.633147] devtmpfs: mounted
  270. [ 2.636242] Freeing unused kernel memory: 264K (c0863000 - c08a5000)
  271. [ 2.714605] random: nonblocking pool is initialized
  272. [ 3.491879] Platform init...
  273. [ 4.321811] Platform init... ok.
  274. [ 4.354352] [Front Version = 40]
  275. [ 4.357597] >> No hwtype = 8
  276. [ 4.383889] input: LUNIX3 4K remote control (native) as /devices/virtual/input/input0
  277. [ 4.399770] LUNIX3 4K Linux DVB BCM73xx CI Driver Release Time (26/07/19)
  278. [ 4.969457] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
  279. [ 4.976001]
  280. [ 4.978545] BKNI_Malloc(linuxkernel) top users:
  281. [ 4.978545] blocks, bytes, filename:line
  282. [ 4.987521]
  283. [ 4.989018] 966, 205800, ../BSEAV/lib/utils/balloc.c:31
  284. [ 4.994946]
  285. [ 5.226648] scanning fe...no fe.
  286. [ 5.350327] DVB: registering new adapter (bcmdvb-0)
  287. [ 12.494553] (NULL device *): DVB: registering adapter 0 frontend 0 (BCM7252S DVB-S2)...
  288. [ 12.502618] tunercnt 0 name bcmdvb-0 adapter0
  289. [ 12.511877] DVB: registering new adapter (bcmdvb-1)
  290. [ 12.653724] (NULL device *): DVB: registering adapter 1 frontend 1 (BCM7252S DVB-S2)...
  291. [ 12.661837] tunercnt 1 name bcmdvb-1 adapter1
  292. [ 12.666775] DVB: registering new adapter (bcmdvb-2)
  293. [ 12.777790] (NULL device *): DVB: registering adapter 2 frontend 2 (BCM7252S DVB-S2)...
  294. [ 12.785832] tunercnt 2 name bcmdvb-2 adapter2
  295. [ 12.790553] DVB: registering new adapter (bcmdvb-3)
  296. [ 12.893844] (NULL device *): DVB: registering adapter 3 frontend 3 (BCM7252S DVB-S2)...
  297. [ 12.901944] tunercnt 3 name bcmdvb-3 adapter3
  298. [ 12.906734] DVB: registering new adapter (bcmdvb-4)
  299. [ 13.008555] (NULL device *): DVB: registering adapter 4 frontend 4 (BCM7252S DVB-S2)...
  300. [ 13.016644] tunercnt 4 name bcmdvb-4 adapter4
  301. [ 13.021336] DVB: registering new adapter (bcmdvb-5)
  302. [ 13.123228] (NULL device *): DVB: registering adapter 5 frontend 5 (BCM7252S DVB-S2)...
  303. [ 13.131354] tunercnt 5 name bcmdvb-5 adapter5
  304. [ 13.136040] DVB: registering new adapter (bcmdvb-6)
  305. [ 13.237844] (NULL device *): DVB: registering adapter 6 frontend 6 (BCM7252S DVB-S2)...
  306. [ 13.245995] tunercnt 6 name bcmdvb-6 adapter6
  307. [ 13.250691] DVB: registering new adapter (bcmdvb-7)
  308. [ 13.352566] (NULL device *): DVB: registering adapter 7 frontend 7 (BCM7252S DVB-S2)...
  309. [ 13.360649] tunercnt 7 name bcmdvb-7 adapter7
  310. [ 13.365444] DVB: registering new adapter (bcmdvb-8)
  311. [ 13.375372] DVB: registering new adapter (bcmdvb-9)
  312. [ 13.383739] >>>vtuner0: register
  313. [ 13.395482] DVB: registering new adapter (bcmdvb-10)
  314. [ 13.406058] DVB: registering new adapter (bcmdvb-11)
  315. [ 13.415671] DVB: registering new adapter (bcmdvb-12)
  316. [ 13.425926] DVB: registering new adapter (bcmdvb-13)
  317. [ 13.436374] DVB: registering new adapter (bcmdvb-14)
  318. [ 13.449847] Registering device 'sci', major '238'
  319. [ 13.461506] Version of smartcard driver: [1.0.0]
  320. [ 13.625211] @@^!^@@
  321. [ 13.687254] EXT4-fs (mmcblk0p4): re-mounted. Opts: data=ordered
  322. [ 14.117357] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
  323. [ 14.128577] f0b00000.ethernet: configuring instance for internal PHY
  324. [ 14.135023] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  325. [ 16.130444] libphy: f0b00000.etherne:01 - Link is Down
  326. [ 23.618194] tun: Universal TUN/TAP device driver, 1.6
  327. [ 23.624626] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  328. [ 30.835227] no vt opened...
  329. [ 30.838155] set source 0 bf8571ac 0.
  330. [ 33.684706] - HD_VideoClip out -
  331. [ 141.641050] libphy: f0b00000.etherne:01 - Link is Up - 100/Full
  332. [ 141.648027] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  333. [ 162.058119] no vt opened...
  334. [ 162.061094] set source 0 bf8571ac 0.
  335. [ 169.633643] no vt opened...
  336. [ 169.636465] set source 0 bf8571ac 0.
  337. [ 181.484007] no vt opened...
  338. [ 181.486848] set source 0 bf8571ac 0.
  339. [ 189.347592] no vt opened...
  340. [ 189.350415] set source 0 bf8571ac 0.
  341. [ 201.002937] no vt opened...
  342. [ 201.005788] set source 0 bf8571ac 0.
  343.  
RAW Paste Data Copied