Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 5.10.76 (user@arinc9) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 11.2.0 r17863-c3bfcad37b) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Mon Nov 1 17:11:10 2021
- [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] OF: fdt: Machine model: Asus RT-AC88U
- [ 0.000000] earlycon: ns16550 at MMIO 0x18000300 (options '115200n8')
- [ 0.000000] printk: bootconsole [ns16550] enabled
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] HighMem [mem 0x0000000008000000-0x000000009fffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] node 0: [mem 0x0000000088000000-0x000000009fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000009fffffff]
- [ 0.000000] On node 0 totalpages: 131072
- [ 0.000000] Normal zone: 288 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
- [ 0.000000] HighMem zone: 98304 pages, LIFO batch:31
- [ 0.000000] percpu: Embedded 14 pages/cpu s27212 r8192 d21940 u57344
- [ 0.000000] pcpu-alloc: s27212 r8192 d21940 u57344 alloc=14*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130784
- [ 0.000000] Kernel command line: earlycon
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 510336K/524288K available (5611K kernel code, 559K rwdata, 1352K rodata, 1024K init, 285K bss, 13952K reserved, 0K cma-reserved, 393216K highmem)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x3a530000
- [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
- [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
- [ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
- [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
- [ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
- [ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
- [ 0.000000] random: get_random_bytes called from start_kernel+0x360/0x510 with crng_init=0
- [ 0.000007] sched_clock: 64 bits at 700MHz, resolution 1ns, wraps every 4398046511103ns
- [ 0.016417] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xa17102bcf3, max_idle_ns: 440795224838 ns
- [ 0.027575] Switching to timer-based delay loop, resolution 1ns
- [ 0.033672] Calibrating delay loop (skipped), value calculated using timer frequency.. 1400.00 BogoMIPS (lpj=7000000)
- [ 0.044398] pid_max: default: 32768 minimum: 301
- [ 0.049128] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.056495] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.064830] CPU: Testing write buffer coherency: ok
- [ 0.069786] CPU0: Spectre v2: using BPIALL workaround
- [ 0.075065] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.081174] Setting up static identity map for 0x100000 - 0x10003c
- [ 0.087524] rcu: Hierarchical SRCU implementation.
- [ 0.092467] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
- [ 0.100351] smp: Bringing up secondary CPUs ...
- [ 0.105499] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.105507] CPU1: Spectre v2: using BPIALL workaround
- [ 0.116364] smp: Brought up 1 node, 2 CPUs
- [ 0.120504] SMP: Total of 2 processors activated (2800.00 BogoMIPS).
- [ 0.126909] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x13)
- [ 0.135390] CPU: This may indicate a broken bootloader or firmware.
- [ 0.143598] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.153517] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
- [ 0.160497] pinctrl core: initialized pinctrl subsystem
- [ 0.166254] NET: Registered protocol family 16
- [ 0.171230] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.178809] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.198394] clocksource: Switched to clocksource arm_global_timer
- [ 0.211441] NET: Registered protocol family 2
- [ 0.215994] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
- [ 0.223625] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
- [ 0.232082] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.239822] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
- [ 0.246937] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.253429] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.260050] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.267170] NET: Registered protocol family 1
- [ 0.271617] PCI: CLS 0 bytes, default 64
- [ 0.276892] workingset: timestamp_bits=14 max_order=17 bucket_order=3
- [ 0.285414] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.291364] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.302188] bounce: pool size: 64 pages
- [ 0.306898] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 0.314075] printk: console [ttyS0] disabled
- [ 0.318506] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 26, base_baud = 7812500) is a 16550
- [ 0.327435] printk: console [ttyS0] enabled
- [ 0.335853] printk: bootconsole [ns16550] disabled
- [ 0.346409] bcm2835-rng 18004000.rng: hwrng registered
- [ 1.027900] random: fast init done
- [ 1.031373] random: crng init done
- [ 1.036383] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xd1
- [ 1.042804] nand: ESMT NAND 128MiB 3,3V 8-bit
- [ 1.047168] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
- [ 1.054783] iproc_nand 18028000.nand-controller: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-8
- [ 1.065693] Scanning device for bad blocks
- [ 1.977565] 3 fixed-partitions partitions found on MTD device brcmnand.0
- [ 1.984299] Creating 3 MTD partitions on "brcmnand.0":
- [ 1.989453] 0x000000000000-0x000000080000 : "boot"
- [ 1.994840] 0x000000080000-0x000000200000 : "nvram"
- [ 2.000309] 0x000000200000-0x000008000000 : "firmware"
- [ 2.007035] 2 trx partitions found on MTD device firmware
- [ 2.012476] Creating 2 MTD partitions on "firmware":
- [ 2.017457] 0x00000000001c-0x000000400000 : "linux"
- [ 2.022351] mtd: partition "linux" doesn't start on an erase/write block boundary -- force read-only
- [ 2.032091] 0x000000400000-0x000007e00000 : "ubi"
- [ 2.039149] bcm_iproc 18029200.spi: using bspi-mspi mode
- [ 2.045960] libphy: Fixed MDIO Bus: probed
- [ 2.050481] libphy: iProc MDIO bus: probed
- [ 2.054609] iproc-mdio 18003000.mdio: Broadcom iProc MDIO bus registered
- [ 2.061998] libphy: mdio_mux: probed
- [ 2.066296] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 0
- [ 2.074157] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
- [ 2.080257] bcma-host-soc 18000000.axi: bus0: Found chip with id 53030, rev 0x00 and package 0x00
- [ 2.089255] bcma-host-soc 18000000.axi: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
- [ 2.099823] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
- [ 2.099831] bcma-host-soc 18000000.axi: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x05, class 0x0)
- [ 2.110563] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
- [ 2.110572] bcma-host-soc 18000000.axi: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x04, class 0x0)
- [ 2.120558] bcma-host-soc 18000000.axi: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
- [ 2.130959] bcma-host-soc 18000000.axi: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
- [ 2.141360] bcma-host-soc 18000000.axi: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
- [ 2.151765] bcma-host-soc 18000000.axi: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
- [ 2.162117] bcma-host-soc 18000000.axi: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
- [ 2.172670] bcma-host-soc 18000000.axi: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
- [ 2.183214] bcma-host-soc 18000000.axi: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
- [ 2.193782] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
- [ 2.193790] bcma-host-soc 18000000.axi: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x07, class 0x0)
- [ 2.205820] bcma-host-soc 18000000.axi: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x07, class 0x0)
- [ 2.216207] bcma-host-soc 18000000.axi: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x07, class 0x0)
- [ 2.226587] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
- [ 2.226594] bcma-host-soc 18000000.axi: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
- [ 2.236792] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
- [ 2.236801] bcma-host-soc 18000000.axi: bus0: Core 14 found: I2S (manuf 0x4BF, id 0x834, rev 0x03, class 0x0)
- [ 2.246827] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
- [ 2.246834] bcma-host-soc 18000000.axi: bus0: Core 15 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
- [ 2.258169] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
- [ 2.258176] bcma-host-soc 18000000.axi: bus0: Core 16 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
- [ 2.270907] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
- [ 2.270914] bcma-host-soc 18000000.axi: bus0: Core 17 found: ROM (manuf 0x4BF, id 0x508, rev 0x08, class 0x0)
- [ 2.280960] bcma-host-soc 18000000.axi: bus0: Core 18 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
- [ 2.292562] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
- [ 2.292569] bcma-host-soc 18000000.axi: bus0: Core 19 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
- [ 2.304025] bcma-host-soc 18000000.axi: bus0: Flash type not supported
- [ 2.321736] bcma-host-soc 18000000.axi: bus0: Using SPROM revision 8 provided by platform.
- [ 2.321976] bgmac_bcma bcma0:3: Found PHY addr: 0
- [ 2.326703] bgmac_bcma bcma0:3: Support for Roboswitch not implemented
- [ 2.333273] bgmac_bcma bcma0:3: Invalid MAC addr: 00:00:00:00:00:00
- [ 2.339568] bgmac_bcma bcma0:3: Using random MAC: 8a:7e:87:f3:0d:f3
- [ 2.346651] b53-srab-switch b53-srab-switch: invalid resource
- [ 2.352492] b53-srab-switch: probe of b53-srab-switch failed with error -22
- [ 2.360159] bgmac_bcma bcma0:4: Found PHY addr: 30 (NOREGS)
- [ 2.365768] bgmac_bcma bcma0:4: Support for Roboswitch not implemented
- [ 2.373653] bgmac_bcma bcma0:5: Found PHY addr: 0
- [ 2.378429] bgmac_bcma bcma0:5: Support for Roboswitch not implemented
- [ 2.386275] bgmac_bcma bcma0:6: Unsupported core_unit 3
- [ 2.391610] bgmac_bcma: probe of bcma0:6 failed with error -524
- [ 2.397653] pcie_iproc_bcma bcma0:7: host bridge /axi@18000000/pcie@12000 ranges:
- [ 2.405184] pcie_iproc_bcma bcma0:7: No bus range found for /axi@18000000/pcie@12000, using [bus 00-ff]
- [ 2.414792] OF: /axi@18000000/pcie@12000: Missing device_type
- [ 2.420560] pcie_iproc_bcma bcma0:7: non-prefetchable memory resource required
- [ 2.548361] pcie_iproc_bcma bcma0:7: link: UP
- [ 2.552849] pcie_iproc_bcma bcma0:7: PCI host bridge to bus 0000:00
- [ 2.559155] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 2.564661] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
- [ 2.571586] pci 0000:00:00.0: [14e4:d612] type 01 class 0x060400
- [ 2.577605] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
- [ 2.587287] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
- [ 2.596972] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x1c may corrupt adjacent RW1C bits
- [ 2.606738] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x1c may corrupt adjacent RW1C bits
- [ 2.616515] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
- [ 2.626304] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
- [ 2.632417] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4c may corrupt adjacent RW1C bits
- [ 2.642888] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
- [ 2.652670] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
- [ 2.662349] pci_bus 0000:00: 1-byte config write to 0000:00:00.0 offset 0xc may corrupt adjacent RW1C bits
- [ 2.672029] PCI: bus0: Fast back to back transfers disabled
- [ 2.677612] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 2.685642] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits
- [ 2.695530] pci 0000:01:00.0: [14e4:4365] type 00 class 0x028000
- [ 2.701589] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
- [ 2.708413] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
- [ 2.715219] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
- [ 2.722546] pci 0000:01:00.0: supports D1 D2
- [ 2.727511] PCI: bus1: Fast back to back transfers disabled
- [ 2.733124] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
- [ 2.739787] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x08bfffff]
- [ 2.746592] pci 0000:00:00.0: BAR 9: assigned [mem 0x08c00000-0x08cfffff 64bit pref]
- [ 2.754362] pci 0000:01:00.0: BAR 2: assigned [mem 0x08000000-0x087fffff 64bit]
- [ 2.761706] pci 0000:01:00.0: BAR 4: assigned [mem 0x08c00000-0x08cfffff 64bit pref]
- [ 2.769476] pci 0000:01:00.0: BAR 0: assigned [mem 0x08800000-0x08807fff 64bit]
- [ 2.776809] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 2.781785] pci 0000:00:00.0: bridge window [mem 0x08000000-0x08bfffff]
- [ 2.788595] pci 0000:00:00.0: bridge window [mem 0x08c00000-0x08cfffff 64bit pref]
- [ 2.796546] pcie_iproc_bcma bcma0:8: host bridge /axi@18000000/pcie@13000 ranges:
- [ 2.804076] pcie_iproc_bcma bcma0:8: No bus range found for /axi@18000000/pcie@13000, using [bus 00-ff]
- [ 2.813684] pcie_iproc_bcma bcma0:8: non-prefetchable memory resource required
- [ 2.938357] pcie_iproc_bcma bcma0:8: link: UP
- [ 2.942828] pcie_iproc_bcma bcma0:8: PCI host bridge to bus 0001:00
- [ 2.949134] pci_bus 0001:00: root bus resource [bus 00-ff]
- [ 2.954633] pci_bus 0001:00: root bus resource [mem 0x20000000-0x27ffffff]
- [ 2.961559] pci 0001:00:00.0: [14e4:d612] type 01 class 0x060400
- [ 2.967625] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
- [ 2.974424] PCI: bus0: Fast back to back transfers disabled
- [ 2.980030] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 2.988177] pci 0001:01:00.0: [14e4:4365] type 00 class 0x028000
- [ 2.994236] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
- [ 3.001063] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x007fffff 64bit]
- [ 3.007873] pci 0001:01:00.0: reg 0x20: [mem 0x00000000-0x000fffff 64bit pref]
- [ 3.015197] pci 0001:01:00.0: supports D1 D2
- [ 3.020160] PCI: bus1: Fast back to back transfers disabled
- [ 3.025760] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
- [ 3.032417] pci 0001:00:00.0: BAR 8: assigned [mem 0x20000000-0x20bfffff]
- [ 3.039227] pci 0001:00:00.0: BAR 9: assigned [mem 0x20c00000-0x20cfffff 64bit pref]
- [ 3.046995] pci 0001:01:00.0: BAR 2: assigned [mem 0x20000000-0x207fffff 64bit]
- [ 3.054335] pci 0001:01:00.0: BAR 4: assigned [mem 0x20c00000-0x20cfffff 64bit pref]
- [ 3.062110] pci 0001:01:00.0: BAR 0: assigned [mem 0x20800000-0x20807fff 64bit]
- [ 3.069452] pci 0001:00:00.0: PCI bridge to [bus 01]
- [ 3.074426] pci 0001:00:00.0: bridge window [mem 0x20000000-0x20bfffff]
- [ 3.081236] pci 0001:00:00.0: bridge window [mem 0x20c00000-0x20cfffff 64bit pref]
- [ 3.089186] pcie_iproc_bcma bcma0:9: host bridge /axi@18000000/pcie@14000 ranges:
- [ 3.096700] pcie_iproc_bcma bcma0:9: No bus range found for /axi@18000000/pcie@14000, using [bus 00-ff]
- [ 3.106311] pcie_iproc_bcma bcma0:9: non-prefetchable memory resource required
- [ 3.238358] pcie_iproc_bcma bcma0:9: PHY or data link is INACTIVE!
- [ 3.244554] pcie_iproc_bcma bcma0:9: no PCIe EP device detected
- [ 3.251346] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
- [ 3.260410] bcma-host-soc 18000000.axi: bus0: Bus registered
- [ 3.266872] NET: Registered protocol family 10
- [ 3.272273] Segment Routing with IPv6
- [ 3.276002] NET: Registered protocol family 17
- [ 3.280721] 8021q: 802.1Q VLAN Support v1.8
- [ 3.284971] Registering SWP/SWPB emulation handler
- [ 3.292527] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 0
- [ 3.421703] libphy: dsa slave smi: probed
- [ 3.426305] b53-srab-switch 18007000.ethernet-switch lan4 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL)
- [ 3.438716] b53-srab-switch 18007000.ethernet-switch lan3 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] (irq=POLL)
- [ 3.451085] b53-srab-switch 18007000.ethernet-switch lan2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] (irq=POLL)
- [ 3.463534] b53-srab-switch 18007000.ethernet-switch lan1 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] (irq=POLL)
- [ 3.475913] b53-srab-switch 18007000.ethernet-switch wan (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY] (irq=POLL)
- [ 3.488538] b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks. Please migrate to PHYLINK!
- [ 3.499383] DSA: tree 0 setup
- [ 3.502628] UBI: auto-attach mtd4
- [ 3.505968] ubi0: attaching mtd4
- [ 4.140208] ubi0: scanning is finished
- [ 4.152625] ubi0: attached mtd4 (name "ubi", size 122 MiB)
- [ 4.158145] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- [ 4.165057] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- [ 4.171867] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
- [ 4.178845] ubi0: good PEBs: 976, bad PEBs: 0, corrupted PEBs: 0
- [ 4.184863] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
- [ 4.192102] ubi0: max/mean erase counter: 13/7, WL threshold: 4096, image sequence number: 1411058067
- [ 4.201351] ubi0: available PEBs: 0, total reserved PEBs: 976, PEBs reserved for bad PEB handling: 20
- [ 4.210650] ubi0: background thread "ubi_bgt0d" started, PID 436
- [ 4.217480] block ubiblock0_0: created from ubi0:0(rootfs)
- [ 4.223020] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
- [ 4.233058] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
- [ 4.241012] Freeing unused kernel memory: 1024K
- [ 4.268508] Run /sbin/init as init process
- [ 4.272616] with arguments:
- [ 4.272618] /sbin/init
- [ 4.272620] with environment:
- [ 4.272623] HOME=/
- [ 4.272625] TERM=linux
- [ 4.479651] init: Console is alive
- [ 4.483258] init: - watchdog -
- [ 4.728789] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 4.794707] usbcore: registered new interface driver usbfs
- [ 4.800327] usbcore: registered new interface driver hub
- [ 4.805726] usbcore: registered new device driver usb
- [ 4.814020] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.821438] ehci-fsl: Freescale EHCI Host controller driver
- [ 4.827913] ehci-platform: EHCI generic platform driver
- [ 4.836039] bcm_ns_usb2 1800c000.usb2-phy: can't request region for resource [mem 0x1800c000-0x1800cfff]
- [ 4.845591] bcm_ns_usb2 1800c000.usb2-phy: Failed to map DMU regs
- [ 4.851731] bcm_ns_usb2: probe of 1800c000.usb2-phy failed with error -16
- [ 4.861333] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 4.868303] ohci-platform: OHCI generic platform driver
- [ 4.873759] ohci-platform 18022000.usb: Generic Platform OHCI controller
- [ 4.880528] ohci-platform 18022000.usb: new USB bus registered, assigned bus number 1
- [ 4.888514] ohci-platform 18022000.usb: irq 45, io mem 0x18022000
- [ 4.962820] hub 1-0:1.0: USB hub found
- [ 4.966628] hub 1-0:1.0: 2 ports detected
- [ 4.998072] xhci-hcd 18023000.usb: xHCI Host Controller
- [ 5.003363] xhci-hcd 18023000.usb: new USB bus registered, assigned bus number 2
- [ 5.011034] xhci-hcd 18023000.usb: hcc params 0x02501164 hci version 0x100 quirks 0x0000100000010010
- [ 5.020237] xhci-hcd 18023000.usb: irq 46, io mem 0x18023000
- [ 5.026023] xhci-hcd 18023000.usb: xHCI Host Controller
- [ 5.031283] xhci-hcd 18023000.usb: new USB bus registered, assigned bus number 3
- [ 5.038706] xhci-hcd 18023000.usb: Host supports USB 3.0 SuperSpeed
- [ 5.047032] hub 2-0:1.0: USB hub found
- [ 5.050868] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
- [ 5.058548] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 5.067081] hub 3-0:1.0: USB hub found
- [ 5.070911] hub 3-0:1.0: 1 port detected
- [ 5.077899] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 5.091700] init: - preinit -
- [ 6.219608] b53-srab-switch 18007000.ethernet-switch lan1: configuring for phy/gmii link mode
- [ 6.228217] bgmac_bcma bcma0:4 eth1: Link is Up - 1Gbps/Full - flow control off
- [ 6.235678] 8021q: adding VLAN 0 to HW filter on device lan1
- [ 6.308679] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
- [ 10.459393] UBIFS (ubi0:1): Mounting in unauthenticated mode
- [ 10.465180] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 585
- [ 10.574194] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
- [ 10.582070] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
- [ 10.592015] UBIFS (ubi0:1): FS size: 115421184 bytes (110 MiB, 909 LEBs), journal size 5840896 bytes (5 MiB, 46 LEBs)
- [ 10.602648] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
- [ 10.609283] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID A841B55F-A7A5-4541-AFAD-341967F5B5A1, small LPT model
- [ 10.621821] mount_root: overlay filesystem has not been fully initialized yet
- [ 10.629438] mount_root: switching to ubifs overlay
- [ 10.891549] urandom-seed: Seed file not found (/etc/urandom.seed)
- [ 11.071912] procd: - early -
- [ 11.074916] procd: - watchdog -
- [ 11.600675] procd: - watchdog -
- [ 11.604150] procd: - ubus -
- [ 11.662286] procd: - init -
- [ 12.070966] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 12.075408] urngd: v1.0.2 started.
- [ 12.140971] Loading modules backported from Linux version v5.15-rc6-0-g519d81956ee2
- [ 12.148685] Backport generated by backports.git v5.15-rc6-1-0-gd44432d6
- [ 12.169009] xt_time: kernel timezone is -0000
- [ 12.190095] PPP generic driver version 2.4.2
- [ 12.195475] NET: Registered protocol family 24
- [ 12.210398] usbcore: registered new interface driver brcmfmac
- [ 12.216315] pci_generic_config_write32: 50 callbacks suppressed
- [ 12.216326] pci_bus 0000:01: 1-byte config write to 0000:01:00.0 offset 0x3c may corrupt adjacent RW1C bits
- [ 12.232081] pci 0000:00:00.0: enabling device (0140 -> 0142)
- [ 12.237754] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
- [ 12.247448] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
- [ 12.257141] brcmfmac 0000:01:00.0: enabling device (0140 -> 0142)
- [ 12.263252] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
- [ 12.272936] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
- [ 12.398657] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM43664/4
- [ 12.407519] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.asus,rt-ac88u.bin failed with error -2
- [ 12.631323] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.asus,rt-ac88u.txt failed with error -2
- [ 12.642480] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.txt failed with error -2
- [ 12.961127] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM43664/4
- [ 12.969968] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
- [ 12.981245] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43664/4 wl0: Nov 5 2018 03:19:56 version 10.28.2 (r769115) FWID 01-d2cbb8fd
- [ 13.003485] pci_bus 0001:01: 1-byte config write to 0001:01:00.0 offset 0x3c may corrupt adjacent RW1C bits
- [ 13.013313] pci 0001:00:00.0: enabling device (0140 -> 0142)
- [ 13.019002] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
- [ 13.028687] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
- [ 13.038371] brcmfmac 0001:01:00.0: enabling device (0140 -> 0142)
- [ 13.044474] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
- [ 13.054168] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
- [ 13.178704] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM43664/4
- [ 13.187496] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.asus,rt-ac88u.bin failed with error -2
- [ 13.202696] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.asus,rt-ac88u.txt failed with error -2
- [ 13.213845] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.txt failed with error -2
- [ 13.531343] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM43664/4
- [ 13.540167] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
- [ 13.551490] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43664/4 wl0: Nov 5 2018 03:19:56 version 10.28.2 (r769115) FWID 01-d2cbb8fd
- [ 13.612123] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 18.660599] bgmac_bcma bcma0:4 eth1: Link is Up - 1Gbps/Full - flow control off
- [ 18.668000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
- [ 18.677889] b53-srab-switch 18007000.ethernet-switch lan1: configuring for phy/gmii link mode
- [ 18.690800] 8021q: adding VLAN 0 to HW filter on device lan1
- [ 18.748856] br0: port 1(lan1) entered blocking state
- [ 18.753852] br0: port 1(lan1) entered disabled state
- [ 18.759294] device lan1 entered promiscuous mode
- [ 18.763934] device eth1 entered promiscuous mode
- [ 19.048519] b53-srab-switch 18007000.ethernet-switch lan2: configuring for phy/gmii link mode
- [ 19.068562] 8021q: adding VLAN 0 to HW filter on device lan2
- [ 19.128889] br0: port 2(lan2) entered blocking state
- [ 19.133907] br0: port 2(lan2) entered disabled state
- [ 19.139277] device lan2 entered promiscuous mode
- [ 19.410642] b53-srab-switch 18007000.ethernet-switch lan3: configuring for phy/gmii link mode
- [ 19.419484] 8021q: adding VLAN 0 to HW filter on device lan3
- [ 19.478694] br0: port 3(lan3) entered blocking state
- [ 19.483677] br0: port 3(lan3) entered disabled state
- [ 19.489067] device lan3 entered promiscuous mode
- [ 19.770774] b53-srab-switch 18007000.ethernet-switch lan4: configuring for phy/gmii link mode
- [ 19.779611] 8021q: adding VLAN 0 to HW filter on device lan4
- [ 19.838685] br0: port 4(lan4) entered blocking state
- [ 19.843673] br0: port 4(lan4) entered disabled state
- [ 19.849076] device lan4 entered promiscuous mode
- [ 20.229671] b53-srab-switch 18007000.ethernet-switch wan: configuring for phy/gmii link mode
- [ 20.238541] 8021q: adding VLAN 0 to HW filter on device wan
- [ 20.245749] b53-srab-switch 18007000.ethernet-switch wan: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 20.298856] br0: port 5(wan) entered blocking state
- [ 20.303781] br0: port 5(wan) entered disabled state
- [ 20.309415] device wan entered promiscuous mode
- [ 20.398506] br0: port 5(wan) entered blocking state
- [ 20.403411] br0: port 5(wan) entered forwarding state
- [ 20.438653] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
- [ 20.445234] IPv6: ADDRCONF(NETDEV_CHANGE): br0.9: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement