Create a new version of paste:

[ 8.163172] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5
[ 8.163331] scsi 1:0:0:0: Direct-Access ATA WDC WD20EZRX-00D 80.0 PQ: 0 ANSI: 5
[ 8.164765] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 8.164768] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 8.164774] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 8.164803] sd 1:0:0:0: [sdb] Write Protect is off
[ 8.164806] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 8.164821] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.164826] sd 0:0:0:0: [sda] Write Protect is off
[ 8.164829] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.164843] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.166406] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.166436] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 8.175247] sda: sda1 sda2 sda3 sda4
[ 8.175608] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.229414] usb 7-5: New USB device found, idVendor=0424, idProduct=2514
[ 8.229417] usb 7-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.229578] hub 7-5:1.0: USB hub found
[ 8.229661] hub 7-5:1.0: 4 ports detected
[ 8.252394] uvesafb: monitor limits: vf = 61 Hz, hf = 83 kHz, clk = 170 MHz
[ 8.253475] uvesafb: scrolling: redraw
[ 8.630759] Console: switching to colour frame buffer device 128x48
[ 8.633344] uvesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011400000, using 14336k, total 14336k
[ 8.633345] fb0: VESA VGA frame buffer device
[ 8.644777] md: md0 stopped.
[ 8.645248] md: bind<sda3>
[ 8.646198] md: raid1 personality registered for level 1
[ 8.646377] md/raid1:md0: active with 1 out of 2 mirrors
[ 8.646391] md0: detected capacity change from 0 to 42916118528
[ 8.646407] RAID1 conf printout:
[ 8.646409] --- wd:1 rd:2
[ 8.646411] disk 0, wo:0, o:1, dev:sda3
[ 8.648749] md0: unknown partition table
[ 8.753331] usb 4-3: new full-speed USB device number 7 using ohci-pci
[ 8.840857] sdb: sdb1 sdb2 sdb3 sdb4
[ 8.841175] sd 1:0:0:0: [sdb] Attached SCSI disk