Create a new version of paste:

/dts-v1/;

/ {
	#address-cells = <0x01>;
	#size-cells = <0x01>;
	compatible = "friendlyarm,nanopi-neo-air\0allwinner,sun8i-h3";
	interrupt-parent = <0x01>;
	model = "FriendlyARM NanoPi NEO Air";
	serial-number = "02c00081cf897191";

	__symbols__ {
		brcmf = "/soc/mmc@1c10000/bcrmf@1";
		bt_pwr_pin = "/soc/pinctrl@1c20800/bt_pwr_pin@0";
		cam_xclk = "/cam-xclk";
		ccu = "/soc/clock@1c20000";
		codec = "/soc/codec@1c22c00";
		codec_analog = "/soc/codec-analog@1f015c0";
		cpu0 = "/cpus/cpu@0";
		cpu0_opp_table = "/opp-table-cpu";
		cpu1 = "/cpus/cpu@1";
		cpu2 = "/cpus/cpu@2";
		cpu3 = "/cpus/cpu@3";
		cpu_crit = "/thermal-zones/cpu_thermal/trips/cpu_crit";
		cpu_hot = "/thermal-zones/cpu_thermal/trips/cpu_hot";
		cpu_hot_pre = "/thermal-zones/cpu_thermal/trips/cpu_hot_pre";
		cpu_very_hot = "/thermal-zones/cpu_thermal/trips/cpu_very_hot";
		cpu_very_hot_pre = "/thermal-zones/cpu_thermal/trips/cpu_very_hot_pre";
		cpu_warm = "/thermal-zones/cpu_thermal/trips/cpu_warm";
		crypto = "/soc/crypto@1c15000";
		csi = "/soc/camera@1cb0000";
		csi_from_ov5640 = "/soc/camera@1cb0000/port/endpoint";
		csi_pins = "/soc/pinctrl@1c20800/csi-pins";
		de = "/display-engine";
		deinterlace = "/soc/deinterlace@1400000";
		display_clocks = "/soc/clock@1000000";
		dma = "/soc/dma-controller@1c02000";
		ehci0 = "/soc/usb@1c1a000";
		ehci1 = "/soc/usb@1c1b000";
		ehci2 = "/soc/usb@1c1c000";
		ehci3 = "/soc/usb@1c1d000";
		emac = "/soc/ethernet@1c30000";
		emac_rgmii_pins = "/soc/pinctrl@1c20800/emac-rgmii-pins";
		external_mdio = "/soc/ethernet@1c30000/mdio-mux/mdio@2";
		gic = "/soc/interrupt-controller@1c81000";
		gpu_opp_table = "/opp-table-gpu";
		hdmi = "/soc/hdmi@1ee0000";
		hdmi_in = "/soc/hdmi@1ee0000/ports/port@0";
		hdmi_in_tcon0 = "/soc/hdmi@1ee0000/ports/port@0/endpoint";
		hdmi_out = "/soc/hdmi@1ee0000/ports/port@1";
		hdmi_phy = "/soc/hdmi-phy@1ef0000";
		i2c0 = "/soc/i2c@1c2ac00";
		i2c0_pins = "/soc/pinctrl@1c20800/i2c0-pins";
		i2c1 = "/soc/i2c@1c2b000";
		i2c1_pins = "/soc/pinctrl@1c20800/i2c1-pins";
		i2c2 = "/soc/i2c@1c2b400";
		i2c2_pins = "/soc/pinctrl@1c20800/i2c2-pins";
		i2s0 = "/soc/i2s@1c22000";
		i2s0_pins = "/soc/pinctrl@1c20800/i2s0-pins";
		i2s1 = "/soc/i2s@1c22400";
		i2s1_pins = "/soc/pinctrl@1c20800/i2s1-pins";
		i2s2 = "/soc/i2s@1c22800";
		int_mii_phy = "/soc/ethernet@1c30000/mdio-mux/mdio@1/ethernet-phy@1";
		internal_mdio = "/soc/ethernet@1c30000/mdio-mux/mdio@1";
		ir = "/soc/ir@1f02000";
		mali = "/soc/gpu@1c40000";
		mbus = "/soc/dram-controller@1c62000";
		mdio = "/soc/ethernet@1c30000/mdio";
		mixer0 = "/soc/mixer@1100000";
		mixer0_out = "/soc/mixer@1100000/ports/port@1";
		mixer0_out_tcon0 = "/soc/mixer@1100000/ports/port@1/endpoint";
		mmc0 = "/soc/mmc@1c0f000";
		mmc0_pins = "/soc/pinctrl@1c20800/mmc0-pins";
		mmc1 = "/soc/mmc@1c10000";
		mmc1_pins = "/soc/pinctrl@1c20800/mmc1-pins";
		mmc2 = "/soc/mmc@1c11000";
		mmc2_8bit_pins = "/soc/pinctrl@1c20800/mmc2-8bit-pins";
		msgbox = "/soc/mailbox@1c17000";
		ohci0 = "/soc/usb@1c1a400";
		ohci1 = "/soc/usb@1c1b400";
		ohci2 = "/soc/usb@1c1c400";
		ohci3 = "/soc/usb@1c1d400";
		osc24M = "/clocks/osc24M_clk";
		osc32k = "/clocks/osc32k_clk";
		ov5640 = "/soc/i2c@1c2b400/camera@3c";
		ov5640_to_csi = "/soc/i2c@1c2b400/camera@3c/port/endpoint";
		pio = "/soc/pinctrl@1c20800";
		pull_pins = "/soc/pinctrl@1c20800/pull_pins";
		pwm = "/soc/pwm@1c21400";
		r_ccu = "/soc/clock@1f01400";
		r_i2c = "/soc/i2c@1f02400";
		r_i2c_pins = "/soc/pinctrl@1f02c00/r-i2c-pins";
		r_intc = "/soc/interrupt-controller@1f00c00";
		r_ir_rx_pin = "/soc/pinctrl@1f02c00/r-ir-rx-pin";
		r_pio = "/soc/pinctrl@1f02c00";
		r_pwm = "/soc/pwm@1f03800";
		r_pwm_pin = "/soc/pinctrl@1f02c00/r-pwm-pin";
		reg_ahci_5v = "/ahci-5v";
		reg_cam_avdd = "/cam-avdd";
		reg_cam_dovdd = "/cam-dovdd";
		reg_cam_dvdd = "/cam-dvdd";
		reg_usb0_vbus = "/usb0-vbus";
		reg_usb1_vbus = "/usb1-vbus";
		reg_usb2_vbus = "/usb2-vbus";
		reg_vcc3v0 = "/vcc3v0";
		reg_vcc3v3 = "/vcc3v3";
		reg_vcc5v0 = "/vcc5v0";
		rtc = "/soc/rtc@1f00000";
		scpi_protocol = "/scpi";
		scpi_sram = "/soc/system-control@1c00000/sram@40000/scp-shmem@bc00";
		sid = "/soc/eeprom@1c14000";
		sound_hdmi = "/sound_hdmi";
		spdif = "/soc/spdif@1c21000";
		spdif_tx_pin = "/soc/pinctrl@1c20800/spdif-tx-pin";
		spi0 = "/soc/spi@1c68000";
		spi0_pins = "/soc/pinctrl@1c20800/spi0-pins";
		spi1 = "/soc/spi@1c69000";
		spi1_pins = "/soc/pinctrl@1c20800/spi1-pins";
		sram_a2 = "/soc/system-control@1c00000/sram@40000";
		sram_c = "/soc/system-control@1c00000/sram@1d00000";
		st7789 = "/soc/spi@1c68000/st7789@0";
		syscon = "/soc/system-control@1c00000";
		tcon0 = "/soc/lcd-controller@1c0c000";
		tcon0_in = "/soc/lcd-controller@1c0c000/ports/port@0";
		tcon0_in_mixer0 = "/soc/lcd-controller@1c0c000/ports/port@0/endpoint";
		tcon0_out = "/soc/lcd-controller@1c0c000/ports/port@1";
		tcon0_out_hdmi = "/soc/lcd-controller@1c0c000/ports/port@1/endpoint@1";
		ths = "/soc/thermal-sensor@1c25000";
		ths_calibration = "/soc/eeprom@1c14000/thermal-sensor-calibration@34";
		uart0 = "/soc/serial@1c28000";
		uart0_pa_pins = "/soc/pinctrl@1c20800/uart0-pa-pins";
		uart1 = "/soc/serial@1c28400";
		uart1_pins = "/soc/pinctrl@1c20800/uart1-pins";
		uart1_rts_cts_pins = "/soc/pinctrl@1c20800/uart1-rts-cts-pins";
		uart2 = "/soc/serial@1c28800";
		uart2_pins = "/soc/pinctrl@1c20800/uart2-pins";
		uart2_rts_cts_pins = "/soc/pinctrl@1c20800/uart2-rts-cts-pins";
		uart3 = "/soc/serial@1c28c00";
		uart3_pins = "/soc/pinctrl@1c20800/uart3-pins";
		uart3_rts_cts_pins = "/soc/pinctrl@1c20800/uart3-rts-cts-pins";
		usb_otg = "/soc/usb@1c19000";
		usbphy = "/soc/phy@1c19400";
		vdd_cpux = "/gpio-regulator";
		ve_sram = "/soc/system-control@1c00000/sram@1d00000/sram-section@0";
		wdt0 = "/soc/watchdog@1c20ca0";
		wifi_en_npi = "/soc/pinctrl@1f02c00/wifi_en_pin";
		wifi_pwrseq = "/wifi_pwrseq";
	};

	ahci-5v {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <0x0e 0x01 0x08 0x00>;
		phandle = <0x80>;
		regulator-boot-on;
		regulator-max-microvolt = <0x4c4b40>;
		regulator-min-microvolt = <0x4c4b40>;
		regulator-name = "ahci-5v";
		status = "disabled";
	};

	aliases {
		mmc0 = "/soc/mmc@1c0f000";
		mmc1 = "/soc/mmc@1c10000";
		mmc2 = "/soc/mmc@1c11000";
		serial0 = "/soc/serial@1c28000";
	};

	cam-avdd {
		compatible = "regulator-fixed";
		phandle = <0x23>;
		regulator-max-microvolt = <0x2ab980>;
		regulator-min-microvolt = <0x2ab980>;
		regulator-name = "cam500b-avdd";
		vin-supply = <0x0d>;
	};

	cam-dovdd {
		compatible = "regulator-fixed";
		phandle = <0x24>;
		regulator-max-microvolt = <0x1b7740>;
		regulator-min-microvolt = <0x1b7740>;
		regulator-name = "cam500b-dovdd";
		vin-supply = <0x0d>;
	};

	cam-dvdd {
		compatible = "regulator-fixed";
		phandle = <0x25>;
		regulator-max-microvolt = <0x16e360>;
		regulator-min-microvolt = <0x16e360>;
		regulator-name = "cam500b-dvdd";
		vin-supply = <0x0d>;
	};

	cam-xclk {
		#clock-cells = <0x00>;
		clock-frequency = <0x16e3600>;
		clock-output-names = "cam-xclk";
		compatible = "fixed-clock";
		phandle = <0x22>;
	};

	chosen {
		#address-cells = <0x01>;
		#size-cells = <0x01>;
		bootargs = "root=UUID=67672fac-b6bc-49c5-9c07-cf4480586a04 rootwait rootfstype=ext4 splash=verbose console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 consoleblank=0 loglevel=1 ubootpart=5ec7151c-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u fbcon=map:1  sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1";
		linux,initrd-end = <0x49fff372>;
		linux,initrd-start = <0x497b9000>;
		ranges;
		stdout-path = "serial0:115200n8";
		u-boot,version = "2022.07-armbian";

		framebuffer-hdmi {
			allwinner,pipeline = "mixer0-lcd0-hdmi";
			clocks = <0x02 0x06 0x03 0x66 0x03 0x6f>;
			compatible = "allwinner,simple-framebuffer\0simple-framebuffer";
			status = "disabled";
		};

		framebuffer-tve {
			allwinner,pipeline = "mixer1-lcd1-tve";
			clocks = <0x02 0x07 0x03 0x67>;
			compatible = "allwinner,simple-framebuffer\0simple-framebuffer";
			status = "disabled";
		};
	};

	clocks {
		#address-cells = <0x01>;
		#size-cells = <0x01>;
		ranges;

		osc24M_clk {
			#clock-cells = <0x00>;
			clock-accuracy = <0xc350>;
			clock-frequency = <0x16e3600>;
			clock-output-names = "osc24M";
			compatible = "fixed-clock";
			phandle = <0x13>;
		};

		osc32k_clk {
			#clock-cells = <0x00>;
			clock-accuracy = <0xc350>;
			clock-frequency = <0x8000>;
			clock-output-names = "ext_osc32k";
			compatible = "fixed-clock";
			phandle = <0x2b>;
		};
	};

	cpus {
		#address-cells = <0x01>;
		#size-cells = <0x00>;

		cpu@0 {
			#cooling-cells = <0x02>;
			clock-names = "cpu";
			clocks = <0x03 0x0e>;
			compatible = "arm,cortex-a7";
			cpu-supply = <0x34>;
			device_type = "cpu";
			enable-method = "psci";
			operating-points-v2 = <0x33>;
			phandle = <0x35>;
			reg = <0x00>;
		};

		cpu@1 {
			#cooling-cells = <0x02>;
			clock-names = "cpu";
			clocks = <0x03 0x0e>;
			compatible = "arm,cortex-a7";
			device_type = "cpu";
			enable-method = "psci";
			operating-points-v2 = <0x33>;
			phandle = <0x36>;
			reg = <0x01>;
		};

		cpu@2 {
			#cooling-cells = <0x02>;
			clock-names = "cpu";
			clocks = <0x03 0x0e>;
			compatible = "arm,cortex-a7";
			device_type = "cpu";
			enable-method = "psci";
			operating-points-v2 = <0x33>;
			phandle = <0x37>;
			reg = <0x02>;
		};

		cpu@3 {
			#cooling-cells = <0x02>;
			clock-names = "cpu";
			clocks = <0x03 0x0e>;
			compatible = "arm,cortex-a7";
			device_type = "cpu";
			enable-method = "psci";
			operating-points-v2 = <0x33>;
			phandle = <0x38>;
			reg = <0x03>;
		};
	};

	display-engine {
		allwinner,pipelines = <0x04>;
		compatible = "allwinner,sun8i-h3-display-engine";
		phandle = <0x42>;
		status = "disabled";
	};

	gpio-regulator {
		compatible = "regulator-gpio";
		gpios = <0x3f 0x00 0x06 0x00>;
		gpios-states = <0x01>;
		phandle = <0x34>;
		pinctrl-names = "default";
		regulator-always-on;
		regulator-boot-on;
		regulator-max-microvolt = <0x13d620>;
		regulator-min-microvolt = <0x10c8e0>;
		regulator-name = "vdd-cpux";
		regulator-ramp-delay = <0x32>;
		regulator-type = "voltage";
		states = <0x10c8e0 0x00 0x13d620 0x01>;
	};

	leds {
		compatible = "gpio-leds";

		led-0 {
			default-state = "on";
			gpios = <0x3f 0x00 0x0a 0x00>;
			label = "nanopi:green:pwr";
		};

		led-1 {
			gpios = <0x0e 0x00 0x0a 0x00>;
			label = "nanopi:blue:status";
			linux,default-trigger = "heartbeat";
		};
	};

	memory {
		device_type = "memory";
		reg = <0x40000000 0x20000000>;
	};

	opp-table-cpu {
		compatible = "operating-points-v2";
		opp-shared;
		phandle = <0x33>;

		opp-1008000000 {
			clock-latency-ns = <0x3b9b0>;
			opp-hz = <0x00 0x3c14dc00>;
			opp-microvolt = <0x124f80 0x124f80 0x13d620>;
		};

		opp-1104000000 {
			clock-latency-ns = <0x3b9b0>;
			opp-hz = <0x00 0x41cdb400>;
			opp-microvolt = <0x142440 0x142440 0x142440>;
		};

		opp-1200000000 {
			clock-latency-ns = <0x3b9b0>;
			opp-hz = <0x00 0x47868c00>;
			opp-microvolt = <0x142440 0x142440 0x142440>;
		};

		opp-1296000000 {
			clock-latency-ns = <0x3b9b0>;
			opp-hz = <0x00 0x4d3f6400>;
			opp-microvolt = <0x147260 0x147260 0x147260>;
		};

		opp-1368000000 {
			clock-latency-ns = <0x3b9b0>;
			opp-hz = <0x00 0x518a0600>;
			opp-microvolt = <0x155cc0 0x155cc0 0x155cc0>;
		};

		opp-480000000 {
			clock-latency-ns = <0x3b9b0>;
			opp-hz = <0x00 0x1c9c3800>;
			opp-microvolt = <0xfde80 0xfde80 0x13d620>;
		};

		opp-648000000 {
			clock-latency-ns = <0x3b9b0>;
			opp-hz = <0x00 0x269fb200>;
			opp-microvolt = <0xfde80 0xfde80 0x13d620>;
		};

		opp-816000000 {
			clock-latency-ns = <0x3b9b0>;
			opp-hz = <0x00 0x30a32c00>;
			opp-microvolt = <0x10c8e0 0x10c8e0 0x13d620>;
		};

		opp-960000000 {
			clock-latency-ns = <0x3b9b0>;
			opp-hz = <0x00 0x39387000>;
			opp-microvolt = <0x124f80 0x124f80 0x13d620>;
		};
	};

	opp-table-gpu {
		compatible = "operating-points-v2";
		phandle = <0x31>;

		opp-120000000 {
			opp-hz = <0x00 0x7270e00>;
		};

		opp-312000000 {
			opp-hz = <0x00 0x1298be00>;
		};

		opp-432000000 {
			opp-hz = <0x00 0x19bfcc00>;
		};

		opp-576000000 {
			opp-hz = <0x00 0x22551000>;
		};
	};

	pmu {
		compatible = "arm,cortex-a7-pmu";
		interrupt-affinity = <0x35 0x36 0x37 0x38>;
		interrupts = <0x00 0x78 0x04 0x00 0x79 0x04 0x00 0x7a 0x04 0x00 0x7b 0x04>;
	};

	psci {
		compatible = "arm,psci";
		cpu_off = <0x95c1ba5f>;
		cpu_on = <0x95c1ba60>;
		cpu_suspend = <0x95c1ba5e>;
		method = "smc";
		migrate = <0x95c1ba61>;
		status = "okay";
	};

	rfkill_bt {
		clock-frequency = <0x8000>;
		clocks = <0x2b>;
		compatible = "rfkill-gpio";
		pinctrl-0 = <0x41>;
		pinctrl-names = "default";
		reset-gpios = <0x0e 0x06 0x0d 0x00>;
		rfkill-name = "sunxi-bt";
		rfkill-type = "bluetooth";
	};

	scpi {
		compatible = "arm,scpi";
		mbox-names = "tx\0rx";
		mboxes = <0x07 0x02 0x07 0x03>;
		phandle = <0x44>;
		shmem = <0x08>;
	};

	soc {
		#address-cells = <0x01>;
		#size-cells = <0x01>;
		compatible = "simple-bus";
		dma-ranges;
		ranges;

		camera@1cb0000 {
			clock-names = "bus\0mod\0ram";
			clocks = <0x03 0x2d 0x03 0x6a 0x03 0x62>;
			compatible = "allwinner,sun8i-h3-csi";
			interrupts = <0x00 0x54 0x04>;
			phandle = <0x73>;
			pinctrl-0 = <0x27>;
			pinctrl-names = "default";
			reg = <0x1cb0000 0x1000>;
			resets = <0x03 0x1e>;
			status = "okay";

			port {
				#address-cells = <0x01>;
				#size-cells = <0x00>;

				endpoint {
					bus-width = <0x08>;
					data-active = <0x01>;
					data-shift = <0x02>;
					hsync-active = <0x01>;
					pclk-sample = <0x01>;
					phandle = <0x26>;
					remote-endpoint = <0x28>;
					vsync-active = <0x00>;
				};
			};
		};

		clock@1000000 {
			#clock-cells = <0x01>;
			#reset-cells = <0x01>;
			clock-names = "bus\0mod";
			clocks = <0x03 0x30 0x03 0x65>;
			compatible = "allwinner,sun8i-h3-de2-clk";
			phandle = <0x02>;
			reg = <0x1000000 0x10000>;
			resets = <0x03 0x22>;
		};

		clock@1c20000 {
			#clock-cells = <0x01>;
			#reset-cells = <0x01>;
			clock-names = "hosc\0losc";
			clocks = <0x13 0x14 0x00>;
			compatible = "allwinner,sun8i-h3-ccu";
			phandle = <0x03>;
			protected-clocks = <0x32>;
			reg = <0x1c20000 0x400>;
		};

		clock@1f01400 {
			#clock-cells = <0x01>;
			#reset-cells = <0x01>;
			clock-names = "hosc\0losc\0iosc\0pll-periph";
			clocks = <0x13 0x14 0x00 0x14 0x02 0x03 0x09>;
			compatible = "allwinner,sun8i-h3-r-ccu";
			phandle = <0x2c>;
			protected-clocks = <0x0a>;
			reg = <0x1f01400 0x100>;
		};

		codec-analog@1f015c0 {
			compatible = "allwinner,sun8i-h3-codec-analog";
			phandle = <0x1b>;
			reg = <0x1f015c0 0x04>;
		};

		codec@1c22c00 {
			#sound-dai-cells = <0x00>;
			allwinner,codec-analog-controls = <0x1b>;
			clock-names = "apb\0codec";
			clocks = <0x03 0x34 0x03 0x6d>;
			compatible = "allwinner,sun8i-h3-codec";
			dma-names = "rx\0tx";
			dmas = <0x18 0x0f 0x18 0x0f>;
			interrupts = <0x00 0x1d 0x04>;
			phandle = <0x6a>;
			reg = <0x1c22c00 0x400>;
			resets = <0x03 0x28>;
			status = "disabled";
		};

		crypto@1c15000 {
			clock-names = "bus\0mod";
			clocks = <0x03 0x14 0x03 0x51>;
			compatible = "allwinner,sun8i-h3-crypto";
			interrupts = <0x00 0x5e 0x04>;
			phandle = <0x7d>;
			reg = <0x1c15000 0x1000>;
			resets = <0x03 0x05>;
		};

		deinterlace@1400000 {
			clock-names = "bus\0mod\0ram";
			clocks = <0x03 0x2c 0x03 0x68 0x03 0x63>;
			compatible = "allwinner,sun8i-h3-deinterlace";
			interconnect-names = "dma-mem";
			interconnects = <0x2f 0x09>;
			interrupts = <0x00 0x5d 0x04>;
			phandle = <0x7a>;
			reg = <0x1400000 0x20000>;
			resets = <0x03 0x1d>;
		};

		dma-controller@1c02000 {
			#dma-cells = <0x01>;
			clocks = <0x03 0x15>;
			compatible = "allwinner,sun8i-h3-dma";
			interrupts = <0x00 0x32 0x04>;
			phandle = <0x18>;
			reg = <0x1c02000 0x1000>;
			resets = <0x03 0x06>;
		};

		dram-controller@1c62000 {
			#address-cells = <0x01>;
			#interconnect-cells = <0x01>;
			#size-cells = <0x01>;
			clock-names = "apb\0dram\0mbus";
			clocks = <0x03 0x1a 0x03 0x60 0x03 0x71>;
			compatible = "allwinner,sun8i-h3-mbus";
			dma-ranges = <0x00 0x40000000 0xc0000000>;
			phandle = <0x2f>;
			reg = <0x1c62000 0x1000 0x1c63000 0x1000>;
			reg-names = "mbus\0dram";
		};

		eeprom@1c14000 {
			#address-cells = <0x01>;
			#size-cells = <0x01>;
			compatible = "allwinner,sun8i-h3-sid";
			phandle = <0x4d>;
			reg = <0x1c14000 0x400>;

			thermal-sensor-calibration@34 {
				phandle = <0x32>;
				reg = <0x34 0x04>;
			};
		};

		ethernet@1c30000 {
			clock-names = "stmmaceth";
			clocks = <0x03 0x1b>;
			compatible = "allwinner,sun8i-h3-emac";
			interrupt-names = "macirq";
			interrupts = <0x00 0x52 0x04>;
			phandle = <0x5f>;
			reg = <0x1c30000 0x10000>;
			reset-names = "stmmaceth";
			resets = <0x03 0x0c>;
			status = "disabled";
			syscon = <0x16>;

			mdio {
				#address-cells = <0x01>;
				#size-cells = <0x00>;
				compatible = "snps,dwmac-mdio";
				phandle = <0x17>;
			};

			mdio-mux {
				#address-cells = <0x01>;
				#size-cells = <0x00>;
				compatible = "allwinner,sun8i-h3-mdio-mux";
				mdio-parent-bus = <0x17>;

				mdio@1 {
					#address-cells = <0x01>;
					#size-cells = <0x00>;
					compatible = "allwinner,sun8i-h3-mdio-internal";
					phandle = <0x60>;
					reg = <0x01>;

					ethernet-phy@1 {
						clocks = <0x03 0x43>;
						compatible = "ethernet-phy-ieee802.3-c22";
						phandle = <0x61>;
						reg = <0x01>;
						resets = <0x03 0x27>;
					};
				};

				mdio@2 {
					#address-cells = <0x01>;
					#size-cells = <0x00>;
					phandle = <0x62>;
					reg = <0x02>;
				};
			};
		};

		gpu@1c40000 {
			clock-names = "bus\0core";
			clocks = <0x03 0x31 0x03 0x72>;
			compatible = "allwinner,sun8i-h3-mali\0arm,mali-400";
			interrupt-names = "gp\0gpmmu\0pp0\0ppmmu0\0pp1\0ppmmu1\0pmu";
			interrupts = <0x00 0x61 0x04 0x00 0x62 0x04 0x00 0x63 0x04 0x00 0x64 0x04 0x00 0x66 0x04 0x00 0x67 0x04 0x00 0x65 0x04>;
			operating-points-v2 = <0x31>;
			phandle = <0x7e>;
			reg = <0x1c40000 0x10000>;
			resets = <0x03 0x23>;
		};

		hdmi-phy@1ef0000 {
			#phy-cells = <0x00>;
			clock-names = "bus\0mod\0pll-0";
			clocks = <0x03 0x2f 0x03 0x70 0x03 0x06>;
			compatible = "allwinner,sun8i-h3-hdmi-phy";
			phandle = <0x29>;
			reg = <0x1ef0000 0x10000>;
			reset-names = "phy";
			resets = <0x03 0x20>;
		};

		hdmi@1ee0000 {
			#sound-dai-cells = <0x00>;
			clock-names = "iahb\0isfr\0tmds";
			clocks = <0x03 0x2f 0x03 0x70 0x03 0x6f>;
			compatible = "allwinner,sun8i-h3-dw-hdmi\0allwinner,sun8i-a83t-dw-hdmi";
			interrupts = <0x00 0x58 0x04>;
			phandle = <0x05>;
			phy-names = "phy";
			phys = <0x29>;
			reg = <0x1ee0000 0x10000>;
			reg-io-width = <0x01>;
			reset-names = "ctrl";
			resets = <0x03 0x21>;
			status = "disabled";

			ports {
				#address-cells = <0x01>;
				#size-cells = <0x00>;

				port@0 {
					phandle = <0x74>;
					reg = <0x00>;

					endpoint {
						phandle = <0x0b>;
						remote-endpoint = <0x2a>;
					};
				};

				port@1 {
					phandle = <0x75>;
					reg = <0x01>;
				};
			};
		};

		i2c@1c2ac00 {
			#address-cells = <0x01>;
			#size-cells = <0x00>;
			clocks = <0x03 0x3b>;
			compatible = "allwinner,sun6i-a31-i2c";
			interrupts = <0x00 0x06 0x04>;
			phandle = <0x6f>;
			pinctrl-0 = <0x1f>;
			pinctrl-names = "default";
			reg = <0x1c2ac00 0x400>;
			resets = <0x03 0x2e>;
			status = "disabled";
		};

		i2c@1c2b000 {
			#address-cells = <0x01>;
			#size-cells = <0x00>;
			clocks = <0x03 0x3c>;
			compatible = "allwinner,sun6i-a31-i2c";
			interrupts = <0x00 0x07 0x04>;
			phandle = <0x70>;
			pinctrl-0 = <0x20>;
			pinctrl-names = "default";
			reg = <0x1c2b000 0x400>;
			resets = <0x03 0x2f>;
			status = "disabled";
		};

		i2c@1c2b400 {
			#address-cells = <0x01>;
			#size-cells = <0x00>;
			clocks = <0x03 0x3d>;
			compatible = "allwinner,sun6i-a31-i2c";
			interrupts = <0x00 0x08 0x04>;
			phandle = <0x71>;
			pinctrl-0 = <0x21>;
			pinctrl-names = "default";
			reg = <0x1c2b400 0x400>;
			resets = <0x03 0x30>;
			status = "okay";

			camera@3c {
				AVDD-supply = <0x23>;
				DOVDD-supply = <0x24>;
				DVDD-supply = <0x25>;
				clock-names = "xclk";
				clocks = <0x22>;
				compatible = "ovti,ov5640";
				phandle = <0x72>;
				powerdown-gpios = <0x0e 0x04 0x0f 0x00>;
				reg = <0x3c>;
				reset-gpios = <0x0e 0x04 0x0e 0x01>;

				port {

					endpoint {
						bus-width = <0x08>;
						data-active = <0x01>;
						data-shift = <0x02>;
						hsync-active = <0x01>;
						pclk-sample = <0x01>;
						phandle = <0x28>;
						remote-endpoint = <0x26>;
						vsync-active = <0x00>;
					};
				};
			};
		};

		i2c@1f02400 {
			#address-cells = <0x01>;
			#size-cells = <0x00>;
			clocks = <0x2c 0x09>;
			compatible = "allwinner,sun6i-a31-i2c";
			interrupts = <0x00 0x2c 0x04>;
			phandle = <0x77>;
			pinctrl-0 = <0x2d>;
			pinctrl-names = "default";
			reg = <0x1f02400 0x400>;
			resets = <0x2c 0x05>;
			status = "disabled";
		};

		i2s@1c22000 {
			#sound-dai-cells = <0x00>;
			clock-names = "apb\0mod";
			clocks = <0x03 0x38 0x03 0x54>;
			compatible = "allwinner,sun8i-h3-i2s";
			dma-names = "rx\0tx";
			dmas = <0x18 0x03 0x18 0x03>;
			interrupts = <0x00 0x0d 0x04>;
			phandle = <0x68>;
			reg = <0x1c22000 0x400>;
			resets = <0x03 0x2b>;
			status = "disabled";
		};

		i2s@1c22400 {
			#sound-dai-cells = <0x00>;
			clock-names = "apb\0mod";
			clocks = <0x03 0x39 0x03 0x55>;
			compatible = "allwinner,sun8i-h3-i2s";
			dma-names = "rx\0tx";
			dmas = <0x18 0x04 0x18 0x04>;
			interrupts = <0x00 0x0e 0x04>;
			phandle = <0x69>;
			reg = <0x1c22400 0x400>;
			resets = <0x03 0x2c>;
			status = "disabled";
		};

		i2s@1c22800 {
			#sound-dai-cells = <0x00>;
			clock-names = "apb\0mod";
			clocks = <0x03 0x3a 0x03 0x56>;
			compatible = "allwinner,sun8i-h3-i2s";
			dma-names = "tx";
			dmas = <0x18 0x1b>;
			interrupts = <0x00 0x0f 0x04>;
			phandle = <0x06>;
			reg = <0x1c22800 0x400>;
			resets = <0x03 0x2d>;
			status = "disabled";
		};

		interrupt-controller@1c81000 {
			#interrupt-cells = <0x03>;
			compatible = "arm,gic-400";
			interrupt-controller;
			interrupts = <0x01 0x09 0xf04>;
			phandle = <0x01>;
			reg = <0x1c81000 0x1000 0x1c82000 0x2000 0x1c84000 0x2000 0x1c86000 0x2000>;
		};

		interrupt-controller@1f00c00 {
			#interrupt-cells = <0x03>;
			compatible = "allwinner,sun8i-h3-r-intc\0allwinner,sun6i-a31-r-intc";
			interrupt-controller;
			interrupts = <0x00 0x20 0x04>;
			phandle = <0x15>;
			reg = <0x1f00c00 0x400>;
		};

		ir@1f02000 {
			clock-names = "apb\0ir";
			clocks = <0x2c 0x04 0x2c 0x0b>;
			compatible = "allwinner,sun6i-a31-ir";
			interrupts = <0x00 0x25 0x04>;
			phandle = <0x76>;
			reg = <0x1f02000 0x400>;
			resets = <0x2c 0x00>;
			status = "disabled";
		};

		lcd-controller@1c0c000 {
			clock-names = "ahb\0tcon-ch1";
			clocks = <0x03 0x2a 0x03 0x66>;
			compatible = "allwinner,sun8i-h3-tcon-tv\0allwinner,sun8i-a83t-tcon-tv";
			interrupts = <0x00 0x56 0x04>;
			phandle = <0x46>;
			reg = <0x1c0c000 0x1000>;
			reset-names = "lcd";
			resets = <0x03 0x1b>;

			ports {
				#address-cells = <0x01>;
				#size-cells = <0x00>;

				port@0 {
					phandle = <0x47>;
					reg = <0x00>;

					endpoint {
						phandle = <0x09>;
						remote-endpoint = <0x0a>;
					};
				};

				port@1 {
					#address-cells = <0x01>;
					#size-cells = <0x00>;
					phandle = <0x48>;
					reg = <0x01>;

					endpoint@1 {
						phandle = <0x2a>;
						reg = <0x01>;
						remote-endpoint = <0x0b>;
					};
				};
			};
		};

		mailbox@1c17000 {
			#mbox-cells = <0x01>;
			clocks = <0x03 0x32>;
			compatible = "allwinner,sun8i-h3-msgbox\0allwinner,sun6i-a31-msgbox";
			interrupts = <0x00 0x31 0x04>;
			phandle = <0x07>;
			reg = <0x1c17000 0x1000>;
			resets = <0x03 0x24>;
		};

		mixer@1100000 {
			clock-names = "bus\0mod";
			clocks = <0x02 0x00 0x02 0x06>;
			compatible = "allwinner,sun8i-h3-de2-mixer-0";
			phandle = <0x04>;
			reg = <0x1100000 0x100000>;
			resets = <0x02 0x00>;

			ports {
				#address-cells = <0x01>;
				#size-cells = <0x00>;

				port@1 {
					phandle = <0x45>;
					reg = <0x01>;

					endpoint {
						phandle = <0x0a>;
						remote-endpoint = <0x09>;
					};
				};
			};
		};

		mmc@1c0f000 {
			#address-cells = <0x01>;
			#size-cells = <0x00>;
			bus-width = <0x04>;
			cd-gpios = <0x0e 0x05 0x06 0x01>;
			clock-names = "ahb\0mmc\0output\0sample";
			clocks = <0x03 0x16 0x03 0x47 0x03 0x49 0x03 0x48>;
			compatible = "allwinner,sun7i-a20-mmc";
			interrupts = <0x00 0x3c 0x04>;
			phandle = <0x49>;
			pinctrl-0 = <0x0c>;
			pinctrl-names = "default";
			reg = <0x1c0f000 0x1000>;
			reset-names = "ahb";
			resets = <0x03 0x07>;
			status = "okay";
			vmmc-supply = <0x0d>;
		};

		mmc@1c10000 {
			#address-cells = <0x01>;
			#size-cells = <0x00>;
			bus-width = <0x04>;
			clock-names = "ahb\0mmc\0output\0sample";
			clocks = <0x03 0x17 0x03 0x4a 0x03 0x4c 0x03 0x4b>;
			compatible = "allwinner,sun7i-a20-mmc";
			interrupts = <0x00 0x3d 0x04>;
			mmc-pwrseq = <0x10>;
			non-removable;
			phandle = <0x4a>;
			pinctrl-0 = <0x0f>;
			pinctrl-names = "default";
			reg = <0x1c10000 0x1000>;
			reset-names = "ahb";
			resets = <0x03 0x08>;
			status = "okay";
			vmmc-supply = <0x0d>;
			vqmmc-supply = <0x0d>;

			bcrmf@1 {
				compatible = "brcm,bcm4329-fmac";
				interrupt-names = "host-wake";
				interrupt-parent = <0x0e>;
				interrupts = <0x06 0x0a 0x08>;
				phandle = <0x4b>;
				reg = <0x01>;
			};
		};

		mmc@1c11000 {
			#address-cells = <0x01>;
			#size-cells = <0x00>;
			bus-width = <0x08>;
			cap-mmc-hw-reset;
			clock-names = "ahb\0mmc\0output\0sample";
			clocks = <0x03 0x18 0x03 0x4d 0x03 0x4f 0x03 0x4e>;
			compatible = "allwinner,sun7i-a20-mmc";
			interrupts = <0x00 0x3e 0x04>;
			non-removable;
			phandle = <0x4c>;
			pinctrl-0 = <0x11>;
			pinctrl-names = "default";
			reg = <0x1c11000 0x1000>;
			reset-names = "ahb";
			resets = <0x03 0x09>;
			status = "okay";
			vmmc-supply = <0x0d>;
		};

		phy@1c19400 {
			#phy-cells = <0x01>;
			clock-names = "usb0_phy\0usb1_phy\0usb2_phy\0usb3_phy";
			clocks = <0x03 0x58 0x03 0x59 0x03 0x5a 0x03 0x5b>;
			compatible = "allwinner,sun8i-h3-usb-phy";
			phandle = <0x12>;
			reg = <0x1c19400 0x2c 0x1c1a800 0x04 0x1c1b800 0x04 0x1c1c800 0x04 0x1c1d800 0x04>;
			reg-names = "phy_ctrl\0pmu0\0pmu1\0pmu2\0pmu3";
			reset-names = "usb0_reset\0usb1_reset\0usb2_reset\0usb3_reset";
			resets = <0x03 0x00 0x03 0x01 0x03 0x02 0x03 0x03>;
			status = "okay";
		};

		pinctrl@1c20800 {
			#gpio-cells = <0x03>;
			#interrupt-cells = <0x03>;
			clock-names = "apb\0hosc\0losc";
			clocks = <0x03 0x36 0x13 0x14 0x00>;
			compatible = "allwinner,sun8i-h3-pinctrl";
			gpio-controller;
			interrupt-controller;
			interrupt-parent = <0x15>;
			interrupts = <0x00 0x0b 0x04 0x00 0x11 0x04>;
			phandle = <0x0e>;
			pinctrl-0 = <0x86>;
			reg = <0x1c20800 0x400>;

			bt_pwr_pin@0 {
				function = "gpio_out";
				phandle = <0x41>;
				pins = "PG13";
			};

			csi-pins {
				function = "csi";
				phandle = <0x27>;
				pins = "PE0\0PE2\0PE3\0PE4\0PE5\0PE6\0PE7\0PE8\0PE9\0PE10\0PE11";
			};

			emac-rgmii-pins {
				drive-strength = <0x28>;
				function = "emac";
				phandle = <0x57>;
				pins = "PD0\0PD1\0PD2\0PD3\0PD4\0PD5\0PD7\0PD8\0PD9\0PD10\0PD12\0PD13\0PD15\0PD16\0PD17";
			};

			i2c0-pins {
				function = "i2c0";
				phandle = <0x1f>;
				pins = "PA11\0PA12";
			};

			i2c1-pins {
				function = "i2c1";
				phandle = <0x20>;
				pins = "PA18\0PA19";
			};

			i2c2-pins {
				bias-pull-up;
				function = "i2c2";
				phandle = <0x21>;
				pins = "PE12\0PE13";
			};

			i2s0-pins {
				function = "i2s0";
				phandle = <0x58>;
				pins = "PA18\0PA19\0PA20\0PA21";
			};

			i2s1-pins {
				function = "i2s1";
				phandle = <0x59>;
				pins = "PG10\0PG11\0PG12\0PG13";
			};

			mmc0-pins {
				bias-pull-up;
				drive-strength = <0x1e>;
				function = "mmc0";
				phandle = <0x0c>;
				pins = "PF0\0PF1\0PF2\0PF3\0PF4\0PF5";
			};

			mmc1-pins {
				bias-pull-up;
				drive-strength = <0x1e>;
				function = "mmc1";
				phandle = <0x0f>;
				pins = "PG0\0PG1\0PG2\0PG3\0PG4\0PG5";
			};

			mmc2-8bit-pins {
				bias-pull-up;
				drive-strength = <0x28>;
				function = "mmc2";
				phandle = <0x11>;
				pins = "PC5\0PC6\0PC8\0PC9\0PC10\0PC11\0PC12\0PC13\0PC14\0PC15\0PC16";
			};

			pull_pins {
				bias-disable;
				function = "gpio_out";
				output-low;
				phandle = <0x86>;
				pins = "PA6";
			};

			spdif-tx-pin {
				function = "spdif";
				phandle = <0x5a>;
				pins = "PA17";
			};

			spi0-pins {
				function = "spi0";
				phandle = <0x19>;
				pins = "PC0\0PC2";
			};

			spi1-pins {
				function = "spi1";
				phandle = <0x1a>;
				pins = "PA15\0PA16\0PA14\0PA13";
			};

			uart0-pa-pins {
				function = "uart0";
				phandle = <0x1c>;
				pins = "PA4\0PA5";
			};

			uart1-pins {
				function = "uart1";
				phandle = <0x5b>;
				pins = "PG6\0PG7";
			};

			uart1-rts-cts-pins {
				function = "uart1";
				phandle = <0x5c>;
				pins = "PG8\0PG9";
			};

			uart2-pins {
				function = "uart2";
				phandle = <0x5d>;
				pins = "PA0\0PA1";
			};

			uart2-rts-cts-pins {
				function = "uart2";
				phandle = <0x5e>;
				pins = "PA2\0PA3";
			};

			uart3-pins {
				function = "uart3";
				phandle = <0x1d>;
				pins = "PA13\0PA14";
			};

			uart3-rts-cts-pins {
				function = "uart3";
				phandle = <0x1e>;
				pins = "PA15\0PA16";
			};
		};

		pinctrl@1f02c00 {
			#gpio-cells = <0x03>;
			#interrupt-cells = <0x03>;
			clock-names = "apb\0hosc\0losc";
			clocks = <0x2c 0x03 0x13 0x14 0x00>;
			compatible = "allwinner,sun8i-h3-r-pinctrl";
			gpio-controller;
			interrupt-controller;
			interrupt-parent = <0x15>;
			interrupts = <0x00 0x2d 0x04>;
			phandle = <0x3f>;
			reg = <0x1f02c00 0x400>;

			r-i2c-pins {
				function = "s_i2c";
				phandle = <0x2d>;
				pins = "PL0\0PL1";
			};

			r-ir-rx-pin {
				function = "s_cir_rx";
				phandle = <0x78>;
				pins = "PL11";
			};

			r-pwm-pin {
				function = "s_pwm";
				phandle = <0x2e>;
				pins = "PL10";
			};

			wifi_en_pin {
				function = "gpio_out";
				phandle = <0x40>;
				pins = "PL7";
			};
		};

		pwm@1c21400 {
			#pwm-cells = <0x03>;
			clocks = <0x13>;
			compatible = "allwinner,sun8i-h3-pwm";
			phandle = <0x67>;
			reg = <0x1c21400 0x08>;
			status = "disabled";
		};

		pwm@1f03800 {
			#pwm-cells = <0x03>;
			clocks = <0x13>;
			compatible = "allwinner,sun8i-h3-pwm";
			phandle = <0x79>;
			pinctrl-0 = <0x2e>;
			pinctrl-names = "default";
			reg = <0x1f03800 0x08>;
			status = "disabled";
		};

		rtc@1f00000 {
			#clock-cells = <0x01>;
			clock-output-names = "osc32k\0osc32k-out\0iosc";
			clocks = <0x2b>;
			compatible = "allwinner,sun8i-h3-rtc";
			interrupt-parent = <0x15>;
			interrupts = <0x00 0x28 0x04 0x00 0x29 0x04>;
			phandle = <0x14>;
			reg = <0x1f00000 0x400>;
		};

		serial@1c28000 {
			clocks = <0x03 0x3e>;
			compatible = "snps,dw-apb-uart";
			dma-names = "rx\0tx";
			dmas = <0x18 0x06 0x18 0x06>;
			interrupts = <0x00 0x00 0x04>;
			phandle = <0x6b>;
			pinctrl-0 = <0x1c>;
			pinctrl-names = "default";
			reg = <0x1c28000 0x400>;
			reg-io-width = <0x04>;
			reg-shift = <0x02>;
			resets = <0x03 0x31>;
			status = "okay";
		};

		serial@1c28400 {
			clocks = <0x03 0x3f>;
			compatible = "snps,dw-apb-uart";
			dma-names = "rx\0tx";
			dmas = <0x18 0x07 0x18 0x07>;
			interrupts = <0x00 0x01 0x04>;
			phandle = <0x6c>;
			reg = <0x1c28400 0x400>;
			reg-io-width = <0x04>;
			reg-shift = <0x02>;
			resets = <0x03 0x32>;
			status = "disabled";
		};

		serial@1c28800 {
			clocks = <0x03 0x40>;
			compatible = "snps,dw-apb-uart";
			dma-names = "rx\0tx";
			dmas = <0x18 0x08 0x18 0x08>;
			interrupts = <0x00 0x02 0x04>;
			phandle = <0x6d>;
			reg = <0x1c28800 0x400>;
			reg-io-width = <0x04>;
			reg-shift = <0x02>;
			resets = <0x03 0x33>;
			status = "disabled";
		};

		serial@1c28c00 {
			clocks = <0x03 0x41>;
			compatible = "snps,dw-apb-uart";
			dma-names = "rx\0tx";
			dmas = <0x18 0x09 0x18 0x09>;
			interrupts = <0x00 0x03 0x04>;
			phandle = <0x6e>;
			pinctrl-0 = <0x1d 0x1e>;
			pinctrl-names = "default";
			reg = <0x1c28c00 0x400>;
			reg-io-width = <0x04>;
			reg-shift = <0x02>;
			resets = <0x03 0x34>;
			status = "okay";
		};

		spdif@1c21000 {
			#sound-dai-cells = <0x00>;
			clock-names = "apb\0spdif";
			clocks = <0x03 0x35 0x03 0x57>;
			compatible = "allwinner,sun8i-h3-spdif";
			dma-names = "tx";
			dmas = <0x18 0x02>;
			interrupts = <0x00 0x0c 0x04>;
			phandle = <0x66>;
			reg = <0x1c21000 0x400>;
			resets = <0x03 0x29>;
			status = "disabled";
		};

		spi@1c68000 {
			#address-cells = <0x01>;
			#cs-gpios = <0x0e 0x02 0x03 0x00>;
			#size-cells = <0x00>;
			clock-names = "ahb\0mod";
			clocks = <0x03 0x1e 0x03 0x52>;
			compatible = "allwinner,sun8i-h3-spi";
			dma-names = "rx\0tx";
			dmas = <0x18 0x17 0x18 0x17>;
			interrupts = <0x00 0x41 0x04>;
			num-cs = <0x01>;
			phandle = <0x63>;
			pinctrl-0 = <0x19>;
			pinctrl-names = "default";
			reg = <0x1c68000 0x1000>;
			resets = <0x03 0x0f>;
			status = "okay";

			st7789@0 {
				buswidth = <0x08>;
				compatible = "sitronix,st7789v";
				dc-gpios = <0x0e 0x06 0x09 0x00>;
				debug = <0x01>;
				height = <0xf0>;
				phandle = <0x87>;
				reg = <0x00>;
				reset-gpios = <0x0e 0x06 0x08 0x01>;
				rotate = <0x00>;
				spi-cpha;
				spi-cpol;
				spi-max-frequency = <0x989680>;
				width = <0xf0>;
			};
		};

		spi@1c69000 {
			#address-cells = <0x01>;
			#size-cells = <0x00>;
			clock-names = "ahb\0mod";
			clocks = <0x03 0x1f 0x03 0x53>;
			compatible = "allwinner,sun8i-h3-spi";
			dma-names = "rx\0tx";
			dmas = <0x18 0x18 0x18 0x18>;
			interrupts = <0x00 0x42 0x04>;
			phandle = <0x64>;
			pinctrl-0 = <0x1a>;
			pinctrl-names = "default";
			reg = <0x1c69000 0x1000>;
			resets = <0x03 0x10>;
			status = "disabled";
		};

		system-control@1c00000 {
			#address-cells = <0x01>;
			#size-cells = <0x01>;
			compatible = "allwinner,sun8i-h3-system-control";
			phandle = <0x16>;
			ranges;
			reg = <0x1c00000 0x1000>;

			sram@1d00000 {
				#address-cells = <0x01>;
				#size-cells = <0x01>;
				compatible = "mmio-sram";
				phandle = <0x7c>;
				ranges = <0x00 0x1d00000 0x80000>;
				reg = <0x1d00000 0x80000>;

				sram-section@0 {
					compatible = "allwinner,sun8i-h3-sram-c1\0allwinner,sun4i-a10-sram-c1";
					phandle = <0x30>;
					reg = <0x00 0x80000>;
				};
			};

			sram@40000 {
				#address-cells = <0x01>;
				#size-cells = <0x01>;
				compatible = "mmio-sram";
				phandle = <0x7b>;
				ranges = <0x00 0x40000 0xc000>;
				reg = <0x40000 0xc000>;

				scp-shmem@bc00 {
					compatible = "arm,scp-shmem";
					phandle = <0x08>;
					reg = <0xbc00 0x200>;
				};
			};
		};

		thermal-sensor@1c25000 {
			#thermal-sensor-cells = <0x00>;
			clock-names = "bus\0mod";
			clocks = <0x03 0x37 0x03 0x45>;
			compatible = "allwinner,sun8i-h3-ths";
			interrupts = <0x00 0x1f 0x04>;
			nvmem-cell-names = "calibration";
			nvmem-cells = <0x32>;
			phandle = <0x39>;
			reg = <0x1c25000 0x400>;
			resets = <0x03 0x2a>;
		};

		timer@1c20c00 {
			clocks = <0x13>;
			compatible = "allwinner,sun8i-a23-timer";
			interrupts = <0x00 0x12 0x04 0x00 0x13 0x04>;
			reg = <0x1c20c00 0xa0>;
		};

		usb@1c19000 {
			clocks = <0x03 0x20>;
			compatible = "allwinner,sun8i-h3-musb";
			dr_mode = "peripheral";
			extcon = <0x12 0x00>;
			interrupt-names = "mc";
			interrupts = <0x00 0x47 0x04>;
			phandle = <0x4e>;
			phy-names = "usb";
			phys = <0x12 0x00>;
			reg = <0x1c19000 0x400>;
			resets = <0x03 0x11>;
			status = "okay";
		};

		usb@1c1a000 {
			clocks = <0x03 0x21 0x03 0x25>;
			compatible = "allwinner,sun8i-h3-ehci\0generic-ehci";
			interrupts = <0x00 0x48 0x04>;
			phandle = <0x4f>;
			reg = <0x1c1a000 0x100>;
			resets = <0x03 0x12 0x03 0x16>;
			status = "okay";
		};

		usb@1c1a400 {
			clocks = <0x03 0x21 0x03 0x25 0x03 0x5c>;
			compatible = "allwinner,sun8i-h3-ohci\0generic-ohci";
			interrupts = <0x00 0x49 0x04>;
			phandle = <0x50>;
			reg = <0x1c1a400 0x100>;
			resets = <0x03 0x12 0x03 0x16>;
			status = "okay";
		};

		usb@1c1b000 {
			clocks = <0x03 0x22 0x03 0x26>;
			compatible = "allwinner,sun8i-h3-ehci\0generic-ehci";
			interrupts = <0x00 0x4a 0x04>;
			phandle = <0x51>;
			phy-names = "usb";
			phys = <0x12 0x01>;
			reg = <0x1c1b000 0x100>;
			resets = <0x03 0x13 0x03 0x17>;
			status = "disabled";
		};

		usb@1c1b400 {
			clocks = <0x03 0x22 0x03 0x26 0x03 0x5d>;
			compatible = "allwinner,sun8i-h3-ohci\0generic-ohci";
			interrupts = <0x00 0x4b 0x04>;
			phandle = <0x52>;
			phy-names = "usb";
			phys = <0x12 0x01>;
			reg = <0x1c1b400 0x100>;
			resets = <0x03 0x13 0x03 0x17>;
			status = "disabled";
		};

		usb@1c1c000 {
			clocks = <0x03 0x23 0x03 0x27>;
			compatible = "allwinner,sun8i-h3-ehci\0generic-ehci";
			interrupts = <0x00 0x4c 0x04>;
			phandle = <0x53>;
			phy-names = "usb";
			phys = <0x12 0x02>;
			reg = <0x1c1c000 0x100>;
			resets = <0x03 0x14 0x03 0x18>;
			status = "okay";
		};

		usb@1c1c400 {
			clocks = <0x03 0x23 0x03 0x27 0x03 0x5e>;
			compatible = "allwinner,sun8i-h3-ohci\0generic-ohci";
			interrupts = <0x00 0x4d 0x04>;
			phandle = <0x54>;
			phy-names = "usb";
			phys = <0x12 0x02>;
			reg = <0x1c1c400 0x100>;
			resets = <0x03 0x14 0x03 0x18>;
			status = "okay";
		};

		usb@1c1d000 {
			clocks = <0x03 0x24 0x03 0x28>;
			compatible = "allwinner,sun8i-h3-ehci\0generic-ehci";
			interrupts = <0x00 0x4e 0x04>;
			phandle = <0x55>;
			phy-names = "usb";
			phys = <0x12 0x03>;
			reg = <0x1c1d000 0x100>;
			resets = <0x03 0x15 0x03 0x19>;
			status = "okay";
		};

		usb@1c1d400 {
			clocks = <0x03 0x24 0x03 0x28 0x03 0x5f>;
			compatible = "allwinner,sun8i-h3-ohci\0generic-ohci";
			interrupts = <0x00 0x4f 0x04>;
			phandle = <0x56>;
			phy-names = "usb";
			phys = <0x12 0x03>;
			reg = <0x1c1d400 0x100>;
			resets = <0x03 0x15 0x03 0x19>;
			status = "okay";
		};

		video-codec@1c0e000 {
			allwinner,sram = <0x30 0x01>;
			clock-names = "ahb\0mod\0ram";
			clocks = <0x03 0x29 0x03 0x6c 0x03 0x61>;
			compatible = "allwinner,sun8i-h3-video-engine";
			interrupts = <0x00 0x3a 0x04>;
			reg = <0x1c0e000 0x1000>;
			resets = <0x03 0x1a>;
		};

		watchdog@1c20ca0 {
			clocks = <0x13>;
			compatible = "allwinner,sun6i-a31-wdt";
			interrupts = <0x00 0x19 0x04>;
			phandle = <0x65>;
			reg = <0x1c20ca0 0x20>;
		};
	};

	sound_hdmi {
		compatible = "allwinner,sun9i-a80-hdmi-audio\0allwinner,sun8i-h3-hdmi-audio";
		phandle = <0x43>;
		status = "disabled";

		codec {
			sound-dai = <0x05>;
		};

		cpu {
			sound-dai = <0x06>;
		};
	};

	thermal-zones {

		cpu_thermal {
			polling-delay = <0x3e8>;
			polling-delay-passive = <0xfa>;
			thermal-sensors = <0x39>;

			cooling-maps {

				cpu_hot_limit_cpu {
					cooling-device = <0x35 0x03 0x04>;
					trip = <0x3c>;
				};

				cpu_hot_pre_limit_cpu {
					cooling-device = <0x35 0x02 0x03>;
					trip = <0x3b>;
				};

				cpu_very_hot_limit_cpu {
					cooling-device = <0x35 0x07 0xffffffff>;
					trip = <0x3e>;
				};

				cpu_very_hot_pre_limit_cpu {
					cooling-device = <0x35 0x05 0x06>;
					trip = <0x3d>;
				};

				cpu_warm_limit_cpu {
					cooling-device = <0x35 0xffffffff 0x02>;
					trip = <0x3a>;
				};
			};

			trips {

				cpu_crit {
					hysteresis = <0x7d0>;
					phandle = <0x7f>;
					temperature = <0x19a28>;
					type = "critical";
				};

				cpu_hot {
					hysteresis = <0x7d0>;
					phandle = <0x3c>;
					temperature = <0x14c08>;
					type = "passive";
				};

				cpu_hot_pre {
					hysteresis = <0x7d0>;
					phandle = <0x3b>;
					temperature = <0x13880>;
					type = "passive";
				};

				cpu_very_hot {
					hysteresis = <0x7d0>;
					phandle = <0x3e>;
					temperature = <0x17318>;
					type = "passive";
				};

				cpu_very_hot_pre {
					hysteresis = <0x7d0>;
					phandle = <0x3d>;
					temperature = <0x15f90>;
					type = "passive";
				};

				cpu_warm {
					hysteresis = <0x7d0>;
					phandle = <0x3a>;
					temperature = <0x124f8>;
					type = "passive";
				};
			};
		};
	};

	timer {
		compatible = "arm,armv7-timer";
		interrupts = <0x01 0x0d 0xf08 0x01 0x0e 0xf08 0x01 0x0b 0xf08 0x01 0x0a 0xf08>;
	};

	usb0-vbus {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <0x0e 0x01 0x09 0x00>;
		phandle = <0x81>;
		regulator-max-microvolt = <0x4c4b40>;
		regulator-min-microvolt = <0x4c4b40>;
		regulator-name = "usb0-vbus";
		status = "disabled";
	};

	usb1-vbus {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <0x0e 0x07 0x06 0x00>;
		phandle = <0x82>;
		regulator-boot-on;
		regulator-max-microvolt = <0x4c4b40>;
		regulator-min-microvolt = <0x4c4b40>;
		regulator-name = "usb1-vbus";
		status = "disabled";
	};

	usb2-vbus {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <0x0e 0x07 0x03 0x00>;
		phandle = <0x83>;
		regulator-boot-on;
		regulator-max-microvolt = <0x4c4b40>;
		regulator-min-microvolt = <0x4c4b40>;
		regulator-name = "usb2-vbus";
		status = "disabled";
	};

	vcc3v0 {
		compatible = "regulator-fixed";
		phandle = <0x84>;
		regulator-max-microvolt = <0x2dc6c0>;
		regulator-min-microvolt = <0x2dc6c0>;
		regulator-name = "vcc3v0";
	};

	vcc3v3 {
		compatible = "regulator-fixed";
		phandle = <0x0d>;
		regulator-max-microvolt = <0x325aa0>;
		regulator-min-microvolt = <0x325aa0>;
		regulator-name = "vcc3v3";
	};

	vcc5v0 {
		compatible = "regulator-fixed";
		phandle = <0x85>;
		regulator-max-microvolt = <0x4c4b40>;
		regulator-min-microvolt = <0x4c4b40>;
		regulator-name = "vcc5v0";
	};

	wifi_pwrseq {
		compatible = "mmc-pwrseq-simple";
		phandle = <0x10>;
		pinctrl-0 = <0x40>;
		pinctrl-names = "default";
		post-power-on-delay-ms = <0xc8>;
		reset-gpios = <0x3f 0x00 0x07 0x01>;
	};
};