Create a new version of paste:

smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-28-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Maxtor DiamondMax 21
Device Model:     MAXTOR STM3160215AS
Serial Number:    5RA46L72
Firmware Version: 4.AAB
User Capacity:    160 041 885 696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-7 (minor revision not indicated)
Local Time is:    Tue Aug 22 22:18:55 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  430) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  54) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   253   006    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0003   100   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   089   089   020    Old_age   Always       -       12270
  5 Reallocated_Sector_Ct   0x0033   097   097   036    Pre-fail  Always       -       131
  7 Seek_Error_Rate         0x000f   088   060   030    Pre-fail  Always       -       779946242
  9 Power_On_Hours          0x0032   078   078   000    Old_age   Always       -       19445
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   094   094   020    Old_age   Always       -       6937
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       355
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   063   043   045    Old_age   Always   In_the_past 37 (0 6 37 33 0)
194 Temperature_Celsius     0x0022   037   057   000    Old_age   Always       -       37 (0 18 0 0 0)
195 Hardware_ECC_Recovered  0x001a   071   058   000    Old_age   Always       -       91388375
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 357 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 357 occurred at disk power-on lifetime: 9330 hours (388 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 bf 31 03 e0  Error: UNC at LBA = 0x000331bf = 209343

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 b8 31 03 e0 00      02:36:37.921  READ DMA EXT
  25 00 08 58 db 48 e0 00      02:36:37.910  READ DMA EXT
  35 00 20 10 5e 60 e0 00      02:36:37.910  WRITE DMA EXT
  25 00 20 e0 c2 0b e0 00      02:36:37.909  READ DMA EXT
  25 00 08 b0 31 03 e0 00      02:36:37.908  READ DMA EXT

Error 356 occurred at disk power-on lifetime: 9330 hours (388 days + 18 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 bf 31 03 e0  Error: UNC at LBA = 0x000331bf = 209343

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 20 a0 31 03 e0 00      02:36:34.206  READ DMA EXT
  35 00 00 10 5b 0a e0 00      02:36:34.198  WRITE DMA EXT
  35 00 00 10 5a 0a e0 00      02:36:34.197  WRITE DMA EXT
  35 00 00 10 59 0a e0 00      02:36:34.195  WRITE DMA EXT
  35 00 00 10 58 0a e0 00      02:36:34.193  WRITE DMA EXT

Error 355 occurred at disk power-on lifetime: 9281 hours (386 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 bf 31 03 e0  Error: UNC at LBA = 0x000331bf = 209343

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 b8 31 03 e0 00      04:33:58.743  READ DMA EXT
  25 00 08 b0 31 03 e0 00      04:33:58.743  READ DMA EXT
  35 00 08 00 ec 37 e0 00      04:33:58.734  WRITE DMA EXT
  25 00 08 a8 31 03 e0 00      04:33:58.858  READ DMA EXT
  ea 00 00 00 00 00 a0 00      04:33:58.858  FLUSH CACHE EXT

Error 354 occurred at disk power-on lifetime: 9281 hours (386 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 bf 31 03 e0  Error: UNC at LBA = 0x000331bf = 209343

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 20 a0 31 03 e0 00      04:33:55.216  READ DMA EXT
  25 00 20 20 2d 03 e0 00      04:33:55.208  READ DMA EXT
  35 00 04 d0 6d 76 e0 00      04:33:55.202  WRITE DMA EXT
  25 00 08 20 4c 04 e0 00      04:33:55.179  READ DMA EXT
  25 00 2f 88 b6 05 e0 00      04:33:55.153  READ DMA EXT

Error 353 occurred at disk power-on lifetime: 9235 hours (384 days + 19 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 bf 31 03 e0  Error: UNC at LBA = 0x000331bf = 209343

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 40 a0 31 03 e0 00      00:05:38.944  READ DMA EXT
  25 00 10 78 31 03 e0 00      00:05:38.939  READ DMA EXT
  25 00 68 f8 30 03 e0 00      00:05:38.939  READ DMA EXT
  25 00 08 90 30 03 e0 00      00:05:38.938  READ DMA EXT
  25 00 10 20 30 03 e0 00      00:05:38.965  READ DMA EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     19364         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.