Create a new version of paste:

Starting Klippy...
Args: ['/home/sven/klipper/klippy/klippy.py', '/home/sven/VZBot_data/config/printer.cfg', '-I', '/home/sven/VZBot_data/comms/klippy.serial', '-l', '/home/sven/VZBot_data/logs/klippy.log', '-a', '/home/sven/VZBot_data/comms/klippy.sock']
Git version: 'v0.11.0-159-gfec7ddd8'
CPU: 2 core Intel(R) Core(TM) i5-4250U CPU @ 1.30GHz
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Mon Apr  3 18:03:34 2023 (1680537814.0 77157.4)
===== Config file =====
[temperature_sensor Octopus]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 100

[temperature_sensor Bauraum]
sensor_type = NTC 100K MGB18-104F39050L32
sensor_pin = PF7
min_temp = 10
max_temp = 100

[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set allow_park = False if not macro_found
	else False if client.park_at_cancel is not defined
	else True  if client.park_at_cancel|lower == 'true'
	else False %}
	{% set retract = 5.0  if not macro_found else client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_x is not defined
	else "X=" + client.park_at_cancel_x|string if client.park_at_cancel_x is not none %}
	{% set park_y = ""                                    if not macro_found
	else ""                                    if client.park_at_cancel_y is not defined
	else "Y=" + client.park_at_cancel_y|string if client.park_at_cancel_y is not none %}
	{% set custom_park = True if (park_x|length > 0 or park_y|length > 0) else False %}
	
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move        = velocity if not macro_found else client.speed_move|default(velocity) %}
	
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE | default(1) | int != 0 %}
	{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
	{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	{action_respond_info("%s, forced by pause_next_layer" % pause_next_layer.call)}
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	{action_respond_info("%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer))}
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = False if not macro_found
	else False if client.use_custom_pos is not defined
	else True  if client.use_custom_pos|lower == 'true'
	else False %}
	{% set custom_park_x  = 0.0 if not macro_found else client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = 0.0 if not macro_found else client.custom_park_y|default(0.0) %}
	{% set park_dz        = 2.0 if not macro_found else client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = 900  if not macro_found else client.speed_hop|default(15) * 60 %}
	{% set sp_move        = velocity * 60 if not macro_found else client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	{action_respond_info("Printer not homed")}
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	{% set use_fw_retract = False if not macro_found
	else False if client.use_fw_retract is not defined
	else True  if client.use_fw_retract|lower == 'true' and printer.firmware_retraction is defined
	else False %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.unretract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_unretract|default(35) %}
	
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.extruder.can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	{action_respond_info("Extruder not hot enough")}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set macro_found = True if printer['gcode_macro _CLIENT_VARIABLE'] is defined else False %}
	{% set client = printer['gcode_macro _CLIENT_VARIABLE'] %}
	
	{% set length = (params.LENGTH|float) if params.LENGTH is defined
	else 1.0 if not macro_found
	else client.retract|default(1.0) %}
	
	{% set speed = params.SPEED if params.SPEED is defined
	else 35 if not macro_found
	else client.speed_retract|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[neopixel vzlogo]
pin = PB0
chain_count = 48
color_order = GRB
initial_red = 0.4
initial_green = 0.0
initial_blue = 0.0

[neopixel front]
pin = PB1
chain_count = 19
color_order = GRB
initial_red = 0.5
initial_green = 0.5
initial_blue = 0.5
initial_white = 1.0

[gcode_macro ServoArmRein]
gcode = 
	SET_SERVO SERVO=KlickSwipe ANGLE=5

[gcode_macro ServoArmRaus]
gcode = 
	SET_SERVO SERVO=KlickSwipe ANGLE=180

[gcode_macro G29]
gcode = 
	BED_MESH_CALIBRATE
	SAVE_CONFIG

[gcode_macro Disable_steppers]
gcode = M18

[mcu EBBCan]
canbus_uuid = 07951fa2419f

[adxl345]
cs_pin = EBBCan: PB12
spi_software_sclk_pin = EBBCan: PB10
spi_software_mosi_pin = EBBCan: PB11
spi_software_miso_pin = EBBCan: PB2
axes_map = x,y,z

[probe]
speed = 150
x_offset = 0
y_offset = 20
z_offset = 2
pin = EBBCan: PB8
samples = 3
samples_result = median
sample_retract_dist = 3.0
samples_tolerance = 0.006
samples_tolerance_retries = 3

[stepper_x]
endstop_pin = !EBBCan: PB6
step_pin = PG0
dir_pin = PG1
enable_pin = !PF15
microsteps = 16
rotation_distance = 40.2
full_steps_per_rotation = 200
position_endstop = -5
position_min = -5
position_max = 330
homing_speed = 100

[extruder]
step_pin = EBBCan: PD0
dir_pin = !EBBCan: PD1
enable_pin = !EBBCan: PD2
microsteps = 16
rotation_distance = 4.55
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = EBBCan: PB13
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = EBBCan: PA3
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 280

[tmc2209 extruder]
uart_pin = EBBCan: PA15
run_current = 0.650
stealthchop_threshold = 999999

[fan]
pin = EBBCan: PA0

[heater_fan hotend_fan]
pin = EBBCan: PA1
heater = extruder
heater_temp = 50.0

[mcu]
canbus_uuid = 8e49821a1203

[exclude_object]

[printer]
kinematics = corexy
max_velocity = 300
max_accel = 8200
max_accel_to_decel = 4100
max_z_velocity = 10
max_z_accel = 60

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 71
shaper_type_y = mzv
shaper_freq_y = 52.6

[tmc2209 stepper_x]
uart_pin = PC4
diag_pin = PG6
run_current = 1.200

[stepper_y]
step_pin = PF13
dir_pin = PF12
enable_pin = !PF14
microsteps = 16
rotation_distance = 40.2
full_steps_per_rotation = 200
endstop_pin = !PG12
position_endstop = 325
position_min = -4
position_max = 325
homing_speed = 100

[tmc2209 stepper_y]
uart_pin = PD11
diag_pin = PG9
run_current = 1.200

[stepper_z]
step_pin = PF11
dir_pin = PG3
enable_pin = !PG5
microsteps = 16
rotation_distance = 8
gear_ratio = 2:1
full_steps_per_rotation = 200
endstop_pin = probe:z_virtual_endstop
position_max = 400
position_min = -2
homing_speed = 10

[tmc2209 stepper_z]
uart_pin = PC6
diag_pin = PG10
run_current = 0.700
stealthchop_threshold = 999999

[servo KlickSwipe]
pin = PB6
initial_angle = 5
maximum_servo_angle = 180
minimum_pulse_width = 0.001
maximum_pulse_width = 0.002

[safe_z_home]
home_xy_position = 60, 250
speed = 100
z_hop = 10
z_hop_speed = 10

[bed_mesh]
speed = 100
horizontal_move_z = 10
mesh_min = 34,63
mesh_max = 314,303
probe_count = 5,5
fade_start = 1.0
fade_end = 10
fade_target = 0
mesh_pps = 3,2
algorithm = lagrange
bicubic_tension = 0.2

[screws_tilt_adjust]
screw1 = -5,323
screw1_name = Vorne Links
screw2 = 134,323
screw2_name = Vorne Mitte
screw3 = 292,323
screw3_name = Vorne Rechts
screw4 = 292,68
screw4_name = Hinten Rechts
screw5 = 132,68
screw5_name = Hinten Mitte
screw6 = -5,68
screw6_name = Hinten Links
horizontal_move_z = 10
speed = 200
screw_thread = CW-M3

[filament_switch_sensor fila_runout]
switch_pin = !PG13

[heater_bed]
heater_pin = PA1
sensor_pin = PF5
sensor_type = EPCOS 100K B57560G104F
min_temp = 0
max_temp = 130
control = pid
pid_kp = 62.279
pid_ki = 2.883
pid_kd = 336.309

[fan_generic gehaeuse]
pin = PD15

[fan_generic test]
pin = PD12

[controller_fan driver1]
pin = PD13
idle_timeout = 90
stepper = stepper_x,stepper_z

[controller_fan driver2]
pin = PD14
idle_timeout = 90
stepper = stepper_x,stepper_z

[gcode_macro POWER_OFF_PRINTER]
gcode = 
	{action_call_remote_method("set_device_power",
	device="shelly_plug",
	state="off")}

[gcode_macro POWER_ON_PRINTER]
gcode = 
	{action_call_remote_method("set_device_power",
	device="shelly_plug",
	state="on")}

[delayed_gcode delayed_printer_off]
initial_duration = 0.
gcode = 
	{% if printer.idle_timeout.state == "Idle" %}
	POWER_OFF_PRINTER
	{% endif %}

[idle_timeout]
gcode = 
	TURN_OFF_MOTORS
	TURN_OFF_HEATERS
	UPDATE_DELAYED_GCODE ID=delayed_printer_off DURATION=60

[board_pins]
aliases = 
	
	EXP1_1=PE8, EXP1_2=PE7,
	EXP1_3=PE9, EXP1_4=PE10,
	EXP1_5=PE12, EXP1_6=PE13,
	EXP1_7=PE14, EXP1_8=PE15,
	EXP1_9=<GND>, EXP1_10=<5V>,
	
	
	EXP2_1=PA6, EXP2_2=PA5,
	EXP2_3=PB1, EXP2_4=PA4,
	EXP2_5=PB2, EXP2_6=PA7,
	EXP2_7=PC15, EXP2_8=<RST>,
	EXP2_9=<GND>, EXP2_10=PC5
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting CAN connect
Created a socket
webhooks client 3046917792: New connection
webhooks client 3046917792: Client info {'program': 'Moonraker', 'version': 'v0.8.0-30-g110cbd1'}
mcu 'mcu': got {'oid': 12, 'next_clock': 3376421632, 'value': 7411, '#name': 'analog_in_state', '#sent_time': 77158.122539924, '#receive_time': 77158.165493496}
mcu 'mcu': got {'oid': 13, 'next_clock': 3378101632, 'value': 31464, '#name': 'analog_in_state', '#sent_time': 77158.122539924, '#receive_time': 77158.174982003}
mcu 'mcu': got {'oid': 16, 'next_clock': 3383141632, 'value': 31509, '#name': 'analog_in_state', '#sent_time': 77158.175911661, '#receive_time': 77158.205777018}
Loaded MCU 'mcu' 119 commands (v0.11.0-148-g52f4e20c / gcc: (15:10.3-2021.07-4) 10.3.1 20210621 (release) binutils: (2.38-3ubuntu1+15build1) 2.38)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_i2c2a=PH4,PH5 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c3a=PH7,PH8 BUS_PINS_sdio=PC12,PD2,PC8,PC9,PC10,PC11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi4=PE13,PE14,PE12 CANBUS_BRIDGE=1 CLOCK_FREQ=168000000 MCU=stm32f429xx PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_CAN=PD0,PD1 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PH0,PH1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu 'EBBCan': Starting CAN connect
Created a socket
mcu 'mcu': got {'oid': 12, 'next_clock': 3426821632, 'value': 7411, '#name': 'analog_in_state', '#sent_time': 77158.392969101, '#receive_time': 77158.465302326}
mcu 'mcu': got {'oid': 13, 'next_clock': 3428501632, 'value': 31465, '#name': 'analog_in_state', '#sent_time': 77158.392969101, '#receive_time': 77158.475790165}
mcu 'mcu': got {'oid': 16, 'next_clock': 3433541632, 'value': 31514, '#name': 'analog_in_state', '#sent_time': 77158.392969101, '#receive_time': 77158.505250976}
mcu 'EBBCan': got {'oid': 10, 'next_clock': 1527639645, 'value': 31508, '#name': 'analog_in_state', '#sent_time': 77158.711339945, '#receive_time': 77158.744302875}
mcu 'mcu': got {'oid': 12, 'next_clock': 3477221632, 'value': 7410, '#name': 'analog_in_state', '#sent_time': 77158.392969101, '#receive_time': 77158.765245051}
mcu 'mcu': got {'oid': 13, 'next_clock': 3478901632, 'value': 31464, '#name': 'analog_in_state', '#sent_time': 77158.392969101, '#receive_time': 77158.775779718}
mcu 'mcu': got {'oid': 16, 'next_clock': 3483941632, 'value': 31505, '#name': 'analog_in_state', '#sent_time': 77158.392969101, '#receive_time': 77158.805966442}
mcu 'EBBCan': got {'oid': 10, 'next_clock': 1546839645, 'value': 31511, '#name': 'analog_in_state', '#sent_time': 77159.02957304001, '#receive_time': 77159.044045666}
mcu 'mcu': got {'oid': 12, 'next_clock': 3527621632, 'value': 7412, '#name': 'analog_in_state', '#sent_time': 77158.392969101, '#receive_time': 77159.065893511}
mcu 'mcu': got {'oid': 13, 'next_clock': 3529301632, 'value': 31464, '#name': 'analog_in_state', '#sent_time': 77158.392969101, '#receive_time': 77159.075687319}
Loaded MCU 'EBBCan' 107 commands (v0.11.0-159-gfec7ddd8 / gcc: (15:10.3-2021.07-4) 10.3.1 20210621 (release) binutils: (2.38-3ubuntu1+15build1) 2.38)
MCU 'EBBCan' config: ADC_MAX=4095 BUS_PINS_i2c1_PA9_PA10=PA9,PA10 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_i2c2_PB13_PB14=PB13,PB14 BUS_PINS_i2c3_PB3_PB4=PB3,PB4 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 CANBUS_FREQUENCY=500000 CLOCK_FREQ=64000000 MCU=stm32g0b1xx PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_CAN=PB0,PB1 RESERVE_PINS_crystal=PF0,PF1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=-251.804511 slope=1231.578947
Configured MCU 'mcu' (1024 moves)
Configured MCU 'EBBCan' (1024 moves)
mcu 'EBBCan': got {'oid': 1, 'clock': 1531899861, 'query_ticks': 1220, 'next_sequence': 0, 'buffered': 0, 'fifo': 0, 'limit_count': 0, '#name': 'adxl345_status', '#sent_time': 77159.101731162, '#receive_time': 77159.107511119}
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (34.0, 43.0)    | (34.0, 63.0)
  1   | (104.0, 43.0)   | (104.0, 63.0)
  2   | (174.0, 43.0)   | (174.0, 63.0)
  3   | (244.0, 43.0)   | (244.0, 63.0)
  4   | (314.0, 43.0)   | (314.0, 63.0)
  5   | (314.0, 103.0)  | (314.0, 123.0)
  6   | (244.0, 103.0)  | (244.0, 123.0)
  7   | (174.0, 103.0)  | (174.0, 123.0)
  8   | (104.0, 103.0)  | (104.0, 123.0)
  9   | (34.0, 103.0)   | (34.0, 123.0)
  10  | (34.0, 163.0)   | (34.0, 183.0)
  11  | (104.0, 163.0)  | (104.0, 183.0)
  12  | (174.0, 163.0)  | (174.0, 183.0)
  13  | (244.0, 163.0)  | (244.0, 183.0)
  14  | (314.0, 163.0)  | (314.0, 183.0)
  15  | (314.0, 223.0)  | (314.0, 243.0)
  16  | (244.0, 223.0)  | (244.0, 243.0)
  17  | (174.0, 223.0)  | (174.0, 243.0)
  18  | (104.0, 223.0)  | (104.0, 243.0)
  19  | (34.0, 223.0)   | (34.0, 243.0)
  20  | (34.0, 283.0)   | (34.0, 303.0)
  21  | (104.0, 283.0)  | (104.0, 303.0)
  22  | (174.0, 283.0)  | (174.0, 303.0)
  23  | (244.0, 283.0)  | (244.0, 303.0)
  24  | (314.0, 283.0)  | (314.0, 303.0)
Starting heater checks for heater_bed
Starting heater checks for extruder
webhooks: registering remote method 'shutdown_machine' for connection id: 3046917792
webhooks: registering remote method 'reboot_machine' for connection id: 3046917792
webhooks: registering remote method 'pause_job_queue' for connection id: 3046917792
webhooks: registering remote method 'start_job_queue' for connection id: 3046917792
webhooks: registering remote method 'set_device_power' for connection id: 3046917792
Stats 77162.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000006 mcu_task_stddev=0.000026 bytes_write=2892 bytes_read=6615 bytes_retransmit=0 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=168013336 EBBCan: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1179 bytes_read=4729 bytes_retransmit=0 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=63995439 adj=63982385 Octopus: temp=26.9 Bauraum: temp=22.2  heater_bed: target=0 temp=22.4 pwm=0.000 sysload=0.05 cputime=0.953 memavail=1679204 print_time=229.758 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 77163.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000006 mcu_task_stddev=0.000026 bytes_write=3592 bytes_read=7296 bytes_retransmit=0 bytes_invalid=0 send_seq=239 receive_seq=238 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=168010857 EBBCan: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=1218 bytes_read=4805 bytes_retransmit=0 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=63998629 adj=63989375 Octopus: temp=26.8 Bauraum: temp=22.2  heater_bed: target=0 temp=22.6 pwm=0.000 sysload=0.04 cputime=1.010 memavail=1679176 print_time=229.908 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 77164.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000006 mcu_task_stddev=0.000026 bytes_write=5355 bytes_read=9159 bytes_retransmit=0 bytes_invalid=0 send_seq=347 receive_seq=347 retransmit_seq=0 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=168014525 EBBCan: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2099 bytes_read=6207 bytes_retransmit=0 bytes_invalid=0 send_seq=200 receive_seq=200 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=63999823 adj=63998788 Octopus: temp=27.0 Bauraum: temp=22.3  heater_bed: target=0 temp=22.8 pwm=0.000 sysload=0.04 cputime=1.124 memavail=1679176 print_time=230.938 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 77165.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000006 mcu_task_stddev=0.000026 bytes_write=6301 bytes_read=9955 bytes_retransmit=0 bytes_invalid=0 send_seq=394 receive_seq=394 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=168008079 EBBCan: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2286 bytes_read=6564 bytes_retransmit=0 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=63998837 adj=63996962 Octopus: temp=26.8 Bauraum: temp=22.3  heater_bed: target=0 temp=22.9 pwm=0.000 sysload=0.04 cputime=1.189 memavail=1679176 print_time=231.931 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stepper stepper_y phase change (was 43 now 17)
Stepper stepper_x phase change (was 15 now 41)
Stepper stepper_y phase change (was 17 now 11)
Stepper stepper_x phase change (was 41 now 47)
Stats 77166.6: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000006 mcu_task_stddev=0.000026 bytes_write=7569 bytes_read=10727 bytes_retransmit=0 bytes_invalid=0 send_seq=440 receive_seq=440 retransmit_seq=0 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=168002946 EBBCan: mcu_awake=0.012 mcu_task_avg=0.000015 mcu_task_stddev=0.000017 bytes_write=2292 bytes_read=6640 bytes_retransmit=0 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=64000508 adj=64000655 Octopus: temp=26.9 Bauraum: temp=22.2  heater_bed: target=0 temp=23.0 pwm=0.000 sysload=0.04 cputime=1.251 memavail=1678924 print_time=233.722 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.6 pwm=0.000
Stats 77167.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000006 mcu_task_stddev=0.000003 bytes_write=7899 bytes_read=11126 bytes_retransmit=0 bytes_invalid=0 send_seq=455 receive_seq=455 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=168002865 EBBCan: mcu_awake=0.009 mcu_task_avg=0.000012 mcu_task_stddev=0.000011 bytes_write=2355 bytes_read=6768 bytes_retransmit=0 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=64000170 adj=64010130 Octopus: temp=26.9 Bauraum: temp=22.1  heater_bed: target=0 temp=22.9 pwm=0.000 sysload=0.04 cputime=1.280 memavail=1678436 print_time=233.922 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 77168.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000006 mcu_task_stddev=0.000003 bytes_write=9464 bytes_read=13412 bytes_retransmit=0 bytes_invalid=0 send_seq=582 receive_seq=582 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=168001066 EBBCan: mcu_awake=0.009 mcu_task_avg=0.000012 mcu_task_stddev=0.000011 bytes_write=3561 bytes_read=8729 bytes_retransmit=0 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=64000064 adj=64008625 Octopus: temp=26.9 Bauraum: temp=22.1  heater_bed: target=0 temp=23.1 pwm=0.000 sysload=0.04 cputime=1.398 memavail=1678396 print_time=234.922 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 77169.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000006 mcu_task_stddev=0.000003 bytes_write=11014 bytes_read=15727 bytes_retransmit=0 bytes_invalid=0 send_seq=709 receive_seq=709 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=168002414 EBBCan: mcu_awake=0.009 mcu_task_avg=0.000012 mcu_task_stddev=0.000011 bytes_write=4767 bytes_read=10705 bytes_retransmit=0 bytes_invalid=0 send_seq=423 receive_seq=423 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=64000846 adj=64008305 Octopus: temp=27.0 Bauraum: temp=22.1  heater_bed: target=0 temp=22.7 pwm=0.000 sysload=0.04 cputime=1.512 memavail=1678396 print_time=235.922 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 77170.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000006 mcu_task_stddev=0.000003 bytes_write=12566 bytes_read=18023 bytes_retransmit=0 bytes_invalid=0 send_seq=835 receive_seq=835 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=168001727 EBBCan: mcu_awake=0.009 mcu_task_avg=0.000012 mcu_task_stddev=0.000011 bytes_write=5973 bytes_read=12666 bytes_retransmit=0 bytes_invalid=0 send_seq=524 receive_seq=524 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=64001120 adj=64007037 Octopus: temp=26.8 Bauraum: temp=22.1  heater_bed: target=0 temp=22.4 pwm=0.000 sysload=0.04 cputime=1.633 memavail=1678468 print_time=236.922 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 77171.6: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000006 mcu_task_stddev=0.000003 bytes_write=14103 bytes_read=20289 bytes_retransmit=0 bytes_invalid=0 send_seq=958 receive_seq=958 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=167999546 EBBCan: mcu_awake=0.009 mcu_task_avg=0.000012 mcu_task_stddev=0.000011 bytes_write=7186 bytes_read=14627 bytes_retransmit=0 bytes_invalid=0 send_seq=625 receive_seq=625 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=64000351 adj=64007350 Octopus: temp=27.0 Bauraum: temp=22.1  heater_bed: target=0 temp=22.2 pwm=0.000 sysload=0.04 cputime=1.762 memavail=1678468 print_time=237.922 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 77172.6: gcodein=0  mcu: mcu_awake=0.053 mcu_task_avg=0.000005 mcu_task_stddev=0.000003 bytes_write=15648 bytes_read=22615 bytes_retransmit=0 bytes_invalid=0 send_seq=1084 receive_seq=1084 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=167999246 EBBCan: mcu_awake=0.043 mcu_task_avg=0.000012 mcu_task_stddev=0.000011 bytes_write=8404 bytes_read=16624 bytes_retransmit=0 bytes_invalid=0 send_seq=727 receive_seq=727 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=63999689 adj=64005845 Octopus: temp=27.0 Bauraum: temp=22.2  heater_bed: target=0 temp=22.2 pwm=0.000 sysload=0.04 cputime=1.901 memavail=1678468 print_time=238.922 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 77173.6: gcodein=0  mcu: mcu_awake=0.053 mcu_task_avg=0.000005 mcu_task_stddev=0.000003 bytes_write=17217 bytes_read=24916 bytes_retransmit=0 bytes_invalid=0 send_seq=1212 receive_seq=1211 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=167997942 EBBCan: mcu_awake=0.043 mcu_task_avg=0.000012 mcu_task_stddev=0.000011 bytes_write=9617 bytes_read=18599 bytes_retransmit=0 bytes_invalid=0 send_seq=828 receive_seq=828 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=63999477 adj=64002194 Octopus: temp=26.7 Bauraum: temp=22.2  heater_bed: target=0 temp=21.6 pwm=0.000 sysload=0.04 cputime=2.012 memavail=1678468 print_time=239.922 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 77174.6: gcodein=0  mcu: mcu_awake=0.053 mcu_task_avg=0.000005 mcu_task_stddev=0.000003 bytes_write=18767 bytes_read=27216 bytes_retransmit=0 bytes_invalid=0 send_seq=1339 receive_seq=1338 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=167997639 EBBCan: mcu_awake=0.043 mcu_task_avg=0.000012 mcu_task_stddev=0.000011 bytes_write=10835 bytes_read=20560 bytes_retransmit=0 bytes_invalid=0 send_seq=930 receive_seq=929 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=63999526 adj=64002981 Octopus: temp=26.8 Bauraum: temp=22.2  heater_bed: target=0 temp=21.4 pwm=0.000 sysload=0.04 cputime=2.133 memavail=1678480 print_time=240.922 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 77175.6: gcodein=0  mcu: mcu_awake=0.053 mcu_task_avg=0.000005 mcu_task_stddev=0.000003 bytes_write=20307 bytes_read=29526 bytes_retransmit=0 bytes_invalid=0 send_seq=1464 receive_seq=1464 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=167998369 EBBCan: mcu_awake=0.043 mcu_task_avg=0.000012 mcu_task_stddev=0.000011 bytes_write=12053 bytes_read=22541 bytes_retransmit=0 bytes_invalid=0 send_seq=1032 receive_seq=1031 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=63999215 adj=64003084 Octopus: temp=27.0 Bauraum: temp=22.3  heater_bed: target=0 temp=21.3 pwm=0.000 sysload=0.04 cputime=2.259 memavail=1678472 print_time=241.922 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.4 pwm=0.000
Stats 77176.6: gcodein=0  mcu: mcu_awake=0.053 mcu_task_avg=0.000005 mcu_task_stddev=0.000003 bytes_write=21864 bytes_read=31827 bytes_retransmit=0 bytes_invalid=0 send_seq=1591 receive_seq=1591 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=167997947 EBBCan: mcu_awake=0.043 mcu_task_avg=0.000012 mcu_task_stddev=0.000011 bytes_write=13259 bytes_read=24507 bytes_retransmit=0 bytes_invalid=0 send_seq=1133 receive_seq=1133 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=63999337 adj=63999504 Octopus: temp=27.0 Bauraum: temp=22.2  heater_bed: target=0 temp=21.1 pwm=0.000 sysload=0.04 cputime=2.376 memavail=1679276 print_time=242.922 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Communication timeout during homing z
Stats 77177.6: gcodein=0  mcu: mcu_awake=0.061 mcu_task_avg=0.000005 mcu_task_stddev=0.000003 bytes_write=22390 bytes_read=32727 bytes_retransmit=0 bytes_invalid=0 send_seq=1634 receive_seq=1634 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=167997003 EBBCan: mcu_awake=0.041 mcu_task_avg=0.000012 mcu_task_stddev=0.000011 bytes_write=13623 bytes_read=25164 bytes_retransmit=0 bytes_invalid=0 send_seq=1162 receive_seq=1162 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=63999126 adj=64000902 Octopus: temp=26.8 Bauraum: temp=22.1  heater_bed: target=0 temp=20.9 pwm=0.000 sysload=0.04 cputime=2.426 memavail=1678488 print_time=243.497 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 77178.6: gcodein=0  mcu: mcu_awake=0.061 mcu_task_avg=0.000005 mcu_task_stddev=0.000003 bytes_write=22396 bytes_read=32904 bytes_retransmit=0 bytes_invalid=0 send_seq=1635 receive_seq=1635 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=167997228 EBBCan: mcu_awake=0.041 mcu_task_avg=0.000012 mcu_task_stddev=0.000011 bytes_write=13629 bytes_read=25240 bytes_retransmit=0 bytes_invalid=0 send_seq=1163 receive_seq=1163 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=63999392 adj=64001567 Octopus: temp=26.9 Bauraum: temp=22.2  heater_bed: target=0 temp=21.0 pwm=0.000 sysload=0.03 cputime=2.440 memavail=1678492 print_time=243.497 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 77179.6: gcodein=0  mcu: mcu_awake=0.061 mcu_task_avg=0.000005 mcu_task_stddev=0.000003 bytes_write=22402 bytes_read=33067 bytes_retransmit=0 bytes_invalid=0 send_seq=1636 receive_seq=1636 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=167997039 EBBCan: mcu_awake=0.041 mcu_task_avg=0.000012 mcu_task_stddev=0.000011 bytes_write=13635 bytes_read=25301 bytes_retransmit=0 bytes_invalid=0 send_seq=1164 receive_seq=1164 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=63999414 adj=64002211 Octopus: temp=26.8 Bauraum: temp=22.1  heater_bed: target=0 temp=21.0 pwm=0.000 sysload=0.03 cputime=2.452 memavail=1678492 print_time=243.497 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 77180.6: gcodein=0  mcu: mcu_awake=0.061 mcu_task_avg=0.000005 mcu_task_stddev=0.000003 bytes_write=22408 bytes_read=33215 bytes_retransmit=0 bytes_invalid=0 send_seq=1637 receive_seq=1637 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=167997952 EBBCan: mcu_awake=0.041 mcu_task_avg=0.000012 mcu_task_stddev=0.000011 bytes_write=13641 bytes_read=25362 bytes_retransmit=0 bytes_invalid=0 send_seq=1165 receive_seq=1165 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=63999297 adj=64002312 Octopus: temp=27.0 Bauraum: temp=22.1  heater_bed: target=0 temp=21.2 pwm=0.000 sysload=0.03 cputime=2.464 memavail=1678492 print_time=243.497 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 77181.6: gcodein=0  mcu: mcu_awake=0.061 mcu_task_avg=0.000005 mcu_task_stddev=0.000003 bytes_write=22414 bytes_read=33392 bytes_retransmit=0 bytes_invalid=0 send_seq=1638 receive_seq=1638 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=167997589 EBBCan: mcu_awake=0.041 mcu_task_avg=0.000012 mcu_task_stddev=0.000011 bytes_write=13647 bytes_read=25438 bytes_retransmit=0 bytes_invalid=0 send_seq=1166 receive_seq=1166 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=63999483 adj=63999113 Octopus: temp=26.8 Bauraum: temp=22.2  heater_bed: target=0 temp=21.4 pwm=0.000 sysload=0.03 cputime=2.477 memavail=1678492 print_time=243.497 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000
Stats 77182.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000005 mcu_task_stddev=0.000003 bytes_write=22420 bytes_read=33570 bytes_retransmit=0 bytes_invalid=0 send_seq=1639 receive_seq=1639 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=167997037 EBBCan: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000009 bytes_write=13653 bytes_read=25513 bytes_retransmit=0 bytes_invalid=0 send_seq=1167 receive_seq=1167 retransmit_seq=0 srtt=0.002 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=63999400 adj=64001326 Octopus: temp=27.0 Bauraum: temp=22.2  heater_bed: target=0 temp=21.8 pwm=0.000 sysload=0.03 cputime=2.489 memavail=1678460 print_time=243.497 buffer_time=0.000 print_stall=0 extruder: target=0 temp=21.5 pwm=0.000