Create a new version of paste:

base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_mmc
key 0
cant find rcvy value
cant find fstbt value
misc partition found
to be run cmd=run setargs_mmc boot_normal
update dtb dram start
update dtb dram  end
PowerBus = 3( 2:vBus 3:acBus other: not exist)
no battery, limit to dc
no battery exist
sunxi_bmp_logo_display
Net:   No ethernet found.
[      1.911]inter uboot shell
Hit any key to stop autoboot:  0
[mmc]: MMC Device 2 not found
** Bad device mmc 2 **
reading bananapi/bpi-m2u/linux/uEnv.txt
2261 bytes read in 4 ms (551.8 KiB/s)
Loaded environment from uEnv.txt
Running uenvcmd ...
Banaan Pi bpi-m2u chip: r40 Service: linux
reading bananapi/bpi-m2u/linux/uImage
6673544 bytes read in 292 ms (21.8 MiB/s)
reading bananapi/berryboot.img
** Unable to read file bananapi/berryboot.img **
## Booting kernel from Legacy Image at 48000000 ...
   Image Name:   Linux-3.10.65-BPI-M2U-Kernel
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    6673480 Bytes = 6.4 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
   reserving fdt memory region: addr=43000000 size=800
   Using Device Tree in place at 44000000, end 4401909f
prepare for kernel
[mmc]: MMC Device 2 not found
[mmc]: mmc 2 not find, so not exit

Starting kernel ...

[    1.080387] platform pwm0: there is no bind_pwm, set bind_pwm 255!
[    1.080387] platform pwm0: there is no dead time, set bind_pwm 255!
[    1.110919] add_sys_pwr_dm: get ldo name  for id: vdd-cpus failed
[    1.110919] add_sys_pwr_dm: get ldo name  for id: vcc-lpddr failed
[    1.110919] add_sys_pwr_dm: get ldo name  for id: vcc-pl failed
[    1.120044] add_sys_pwr_dm: axp22_dcdc1 ldo already alwayson.
[    1.120137] Warning: can not find np for dynamic_standby_para.
[    1.186026] OF: no ranges; cannot translate
[    1.186055] OF: no ranges; cannot translate
[    1.186335] OF: no ranges; cannot translate
[    1.186353] OF: no ranges; cannot translate
[    1.356757] sunxi-wlan wlan: request pincrtl handle for device [wlan] failed
[    1.364898] /soc@01c00000/wlan: could not find phandle
[    1.370754] sunxi-wlan wlan: get gpio wlan_hostwake failed
[    1.450039] sunxi-ahci sata: SATA power enable do not exist!!
[    1.713234] sunxi_ir_startup: get cir addr cnt failed
[    1.718711] sunxi_ir_startup: get cir supply_vol failed[    1.724800] sunxi_ir_startup: cir get supply err
[    1.752609] get() with no identifier
[    1.756614] get() with no identifier
[    1.760790] get() with no identifier
[    1.850088] *mmc0 detect cd change*
[    1.854009] *mmc0 lock*
[    1.890852] sunxi-mmc sdc0: smc 0 p0 err, cmd 52, RTO !!
[    1.897714] sunxi-mmc sdc0: smc 0 p0 err, cmd 52, RTO !!
[    1.908449] sunxi-mmc sdc0: smc 0 p0 err, cmd 5, RTO !!
[    1.915227] sunxi-mmc sdc0: smc 0 p0 err, cmd 5, RTO !!
[    1.921992] sunxi-mmc sdc0: smc 0 p0 err, cmd 5, RTO !!
[    1.928728] sunxi-mmc sdc0: smc 0 p0 err, cmd 5, RTO !!
[    1.969944] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !!
[    1.976829] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !!
[    1.987202] sunxi-mmc sdc1: smc 1 p1 err, cmd 8, RTO !!
[    1.993964] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
[    2.000707] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
[    2.007452] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
[    2.014243] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
[    2.021007] sunxi-mmc sdc1: smc 1 p1 err, cmd 55, RTO !!
[    2.027857] sunxi-mmc sdc1: smc 1 p1 err, cmd 55, RTO !!
[    2.034707] sunxi-mmc sdc1: smc 1 p1 err, cmd 55, RTO !!
[    2.041750] sunxi-mmc sdc1: smc 1 p1 err, cmd 55, RTO !!
[    2.048655] sunxi-mmc sdc1: smc 1 p1 err, cmd 1, RTO !!
[    2.072806] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
[    2.086447] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
[    2.776751] Failed to execute /init.  Attempting defaults...
[    3.118100] systemd[1]: Failed to insert module 'ipv6'
[    4.431075] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !!
[    4.431960] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !!
[    4.436581] sunxi-mmc sdc1: smc 1 p1 err, cmd 8, RTO !!
[    5.997703] [VFE_DEV_I2C_ERR]cci_read_a16_d8 error! slave = 0x3c, addr = 0x300a, value = 0x 0

[    6.016687] [VFE_DEV_I2C_ERR]cci_read_a16_d8 error! slave = 0x3c, addr = 0x300a, value = 0x 0

[    6.036223] [VFE_DEV_I2C_ERR]cci_read_a16_d8 error! slave = 0x3c, addr = 0x300a, value = 0x 0
 ov5640 sensor read retry=2
[    6.103072] [VFE_ERR]vfe sensor register check error at input_num = 0
[   69.353146] EXT4-fs error (device mmcblk0p2): ext4_mb_generate_buddy:755: group 1, 2 clusters in bitmap, 1 in gd
[   69.374787] EXT4-fs (mmcblk0p2): Remounting filesystem read-only
[   69.393202] EXT4-fs (mmcblk0p2): ext4_da_writepages: jbd2_start: 2147483646 pages, ino 40518; err -30

Debian GNU/Linux 8 bpi-iot-ros-ai ttyS0

bpi-iot-ros-ai login: