QdeQabra

Untitled

May 2nd, 2021
5
130 days
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. Lakka:~ # dmesg
  2. [    0.000000] Booting Linux on physical CPU 0x0
  3. [    0.000000] Linux version 5.10.31 (lakkabuildbot@globox) (armv8a-libreelec-linux-gnueabi-gcc-9.3.0 (GCC) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP Sun Apr 25 00:51:41 CEST 2021
  4. [    0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
  5. [    0.000000] CPU: div instructions available: patching division code
  6. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  7. [    0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2
  8. [    0.000000] Memory policy: Data cache writealloc
  9. [    0.000000] Reserved memory: created CMA memory pool at 0x0000000017c00000, size 256 MiB
  10. [    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  11. [    0.000000] Zone ranges:
  12. [    0.000000]   DMA      [mem 0x0000000000000000-0x0000000027ffffff]
  13. [    0.000000]   Normal   empty
  14. [    0.000000]   HighMem  [mem 0x0000000028000000-0x00000000fbffffff]
  15. [    0.000000] Movable zone start for each node
  16. [    0.000000] Early memory node ranges
  17. [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000027ffffff]
  18. [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
  19. [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
  20. [    0.000000] On node 0 totalpages: 933888
  21. [    0.000000]   DMA zone: 1920 pages used for memmap
  22. [    0.000000]   DMA zone: 0 pages reserved
  23. [    0.000000]   DMA zone: 163840 pages, LIFO batch:31
  24. [    0.000000]   HighMem zone: 770048 pages, LIFO batch:63
  25. [    0.000000] percpu: Embedded 20 pages/cpu s51788 r8192 d21940 u81920
  26. [    0.000000] pcpu-alloc: s51788 r8192 d21940 u81920 alloc=20*4096
  27. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  28. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 931968
  29. [    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1280x720M@60 smsc95xx.macaddr=DC:A6:32:A5:1A:02 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  boot=UUID=2904-3200 disk=UUID=76650237-13d3-450b-b12b-8378887496a7 quiet root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1
  30. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  31. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  32. [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  33. [    0.000000] software IO TLB: mapped [mem 0x0000000010cc0000-0x0000000014cc0000] (64MB)
  34. [    0.000000] Memory: 3339428K/3735552K available (12288K kernel code, 1371K rwdata, 2684K rodata, 4096K init, 599K bss, 133980K reserved, 262144K cma-reserved, 3080192K highmem)
  35. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  36. [    0.000000] ftrace: allocating 37604 entries in 74 pages
  37. [    0.000000] ftrace: allocated 74 pages with 3 groups
  38. [    0.000000] rcu: Hierarchical RCU implementation.
  39. [    0.000000]  Rude variant of Tasks RCU enabled.
  40. [    0.000000]  Tracing variant of Tasks RCU enabled.
  41. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
  42. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  43. [    0.000000] GIC: Using split EOI/Deactivate mode
  44. [    0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 25)
  45. [    0.000000] random: get_random_bytes called from start_kernel+0x3c4/0x598 with crng_init=0
  46. [    0.000008] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
  47. [    0.000026] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
  48. [    0.000082] bcm2835: system timer (irq = 26)
  49. [    0.000729] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  50. [    0.000747] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  51. [    0.000765] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  52. [    0.000780] Switching to timer-based delay loop, resolution 18ns
  53. [    0.001040] Console: colour dummy device 80x30
  54. [    0.001109] printk: console [tty0] enabled
  55. [    0.001162] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.50 BogoMIPS (lpj=180000)
  56. [    0.001194] pid_max: default: 32768 minimum: 301
  57. [    0.001410] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  58. [    0.001437] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  59. [    0.002922] Disabling memory control group subsystem
  60. [    0.002970] CPU: Testing write buffer coherency: ok
  61. [    0.003409] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  62. [    0.004548] Setting up static identity map for 0x200000 - 0x20003c
  63. [    0.004727] rcu: Hierarchical SRCU implementation.
  64. [    0.005962] smp: Bringing up secondary CPUs ...
  65. [    0.007108] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  66. [    0.008452] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  67. [    0.009672] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  68. [    0.009820] smp: Brought up 1 node, 4 CPUs
  69. [    0.009842] SMP: Total of 4 processors activated (432.00 BogoMIPS).
  70. [    0.009858] CPU: All CPU(s) started in HYP mode.
  71. [    0.009872] CPU: Virtualization extensions available.
  72. [    0.010575] devtmpfs: initialized
  73. [    0.024367] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
  74. [    0.024589] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  75. [    0.024620] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  76. [    0.031199] pinctrl core: initialized pinctrl subsystem
  77. [    0.032382] NET: Registered protocol family 16
  78. [    0.036439] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  79. [    0.037789] thermal_sys: Registered thermal governor 'step_wise'
  80. [    0.038026] cpuidle: using governor ladder
  81. [    0.038078] cpuidle: using governor menu
  82. [    0.038614] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  83. [    0.038630] hw-breakpoint: maximum watchpoint size is 8 bytes.
  84. [    0.039031] Serial: AMBA PL011 UART driver
  85. [    0.081801] bcm2835-mbox fe00b880.mailbox: mailbox enabled
  86. [    0.087727] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-04-21T15:48:42, variant start_x
  87. [    0.091072] raspberrypi-firmware soc:firmware: Firmware hash is a48d332c35ee1c1c1ab433228e23317f62dcc5fb
  88. [    0.125605] Kprobes globally optimized
  89. [    0.131756] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
  90. [    0.136070] vgaarb: loaded
  91. [    0.136456] SCSI subsystem initialized
  92. [    0.136682] usbcore: registered new interface driver usbfs
  93. [    0.136743] usbcore: registered new interface driver hub
  94. [    0.136817] usbcore: registered new device driver usb
  95. [    0.137562] Advanced Linux Sound Architecture Driver Initialized.
  96. [    0.138826] clocksource: Switched to clocksource arch_sys_counter
  97. [    1.144369] FS-Cache: Loaded
  98. [    1.154417] NET: Registered protocol family 2
  99. [    1.155413] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  100. [    1.155457] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  101. [    1.155545] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  102. [    1.155617] TCP: Hash tables configured (established 8192 bind 8192)
  103. [    1.155778] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  104. [    1.155814] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  105. [    1.156070] NET: Registered protocol family 1
  106. [    1.156746] RPC: Registered named UNIX socket transport module.
  107. [    1.156762] RPC: Registered udp transport module.
  108. [    1.156777] RPC: Registered tcp transport module.
  109. [    1.156792] RPC: Registered tcp NFSv4.1 backchannel transport module.
  110. [    1.156816] PCI: CLS 0 bytes, default 64
  111. [    1.302599] Initialise system trusted keyrings
  112. [    1.302814] workingset: timestamp_bits=14 max_order=20 bucket_order=6
  113. [    1.312052] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  114. [    1.312877] FS-Cache: Netfs 'nfs' registered for caching
  115. [    1.313704] NFS: Registering the id_resolver key type
  116. [    1.313758] Key type id_resolver registered
  117. [    1.313774] Key type id_legacy registered
  118. [    1.313893] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  119. [    1.313909] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  120. [    1.314610] FS-Cache: Netfs 'cifs' registered for caching
  121. [    1.315016] Key type cifs.idmap registered
  122. [    1.439613] Key type asymmetric registered
  123. [    1.439632] Asymmetric key parser 'x509' registered
  124. [    1.439857] bounce: pool size: 64 pages
  125. [    1.439973] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  126. [    1.439992] io scheduler mq-deadline registered
  127. [    1.440008] io scheduler kyber registered
  128. [    1.440180] io scheduler bfq registered
  129. [    1.444969] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
  130. [    1.445000] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
  131. [    1.445081] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
  132. [    1.445170] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
  133. [    1.487602] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
  134. [    1.487945] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
  135. [    1.487966] pci_bus 0000:00: root bus resource [bus 00-ff]
  136. [    1.487987] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
  137. [    1.488077] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
  138. [    1.488323] pci 0000:00:00.0: PME# supported from D0 D3hot
  139. [    1.491884] PCI: bus0: Fast back to back transfers disabled
  140. [    1.491909] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  141. [    1.492327] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
  142. [    1.492454] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
  143. [    1.492889] pci 0000:01:00.0: PME# supported from D0 D3cold
  144. [    1.496400] PCI: bus1: Fast back to back transfers disabled
  145. [    1.496422] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  146. [    1.496464] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
  147. [    1.496489] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
  148. [    1.496573] pci 0000:00:00.0: PCI bridge to [bus 01]
  149. [    1.496598] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
  150. [    1.496988] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
  151. [    1.497212] pcieport 0000:00:00.0: PME: Signaling with IRQ 80
  152. [    1.497612] pcieport 0000:00:00.0: AER: enabled with IRQ 80
  153. [    1.507307] iproc-rng200 fe104000.rng: hwrng registered
  154. [    1.507652] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  155. [    1.519445] vc4-drm gpu: bound fe400000.hvs (ops 0xc0e66fe0)
  156. [    1.532337] brd: module loaded
  157. [    1.532491] loop: module loaded
  158. [    1.556835] usbcore: registered new interface driver rtsx_usb
  159. [    1.558584] Loading iSCSI transport class v2.0-870.
  160. [    1.559324] iscsi: registered transport (tcp)
  161. [    1.561158] libphy: Fixed MDIO Bus: probed
  162. [    1.561778] tun: Universal TUN/TAP device driver, 1.6
  163. [    1.562836] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
  164. [    1.575520] libphy: bcmgenet MII bus: probed
  165. [    1.628978] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
  166. [    1.630089] usbcore: registered new interface driver lan78xx
  167. [    1.630154] usbcore: registered new interface driver dm9601
  168. [    1.630214] usbcore: registered new interface driver smsc95xx
  169. [    1.631868] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142)
  170. [    1.632044] xhci_hcd 0000:01:00.0: xHCI Host Controller
  171. [    1.632080] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  172. [    1.635744] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
  173. [    1.637032] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  174. [    1.637052] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  175. [    1.637069] usb usb1: Product: xHCI Host Controller
  176. [    1.637086] usb usb1: Manufacturer: Linux 5.10.31 xhci-hcd
  177. [    1.637102] usb usb1: SerialNumber: 0000:01:00.0
  178. [    1.637835] hub 1-0:1.0: USB hub found
  179. [    1.637934] hub 1-0:1.0: 1 port detected
  180. [    1.638602] xhci_hcd 0000:01:00.0: xHCI Host Controller
  181. [    1.638629] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  182. [    1.638655] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
  183. [    1.639174] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
  184. [    1.639193] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  185. [    1.639210] usb usb2: Product: xHCI Host Controller
  186. [    1.639226] usb usb2: Manufacturer: Linux 5.10.31 xhci-hcd
  187. [    1.639242] usb usb2: SerialNumber: 0000:01:00.0
  188. [    1.639930] hub 2-0:1.0: USB hub found
  189. [    1.640006] hub 2-0:1.0: 4 ports detected
  190. [    1.641784] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  191. [    1.642167] dwc_otg: FIQ enabled
  192. [    1.642182] dwc_otg: NAK holdoff enabled
  193. [    1.642196] dwc_otg: FIQ split-transaction FSM enabled
  194. [    1.642215] Module dwc_common_port init
  195. [    1.642654] usbcore: registered new interface driver uas
  196. [    1.642760] usbcore: registered new interface driver usb-storage
  197. [    1.642955] mousedev: PS/2 mouse device common for all mice
  198. [    1.643333] i2c /dev entries driver
  199. [    1.644507] brcmstb-i2c fef04500.i2c:  @97500hz registered in polling mode
  200. [    1.645161] brcmstb-i2c fef09500.i2c:  @97500hz registered in polling mode
  201. [    1.648484] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  202. [    1.652109] sdhci: Secure Digital Host Controller Interface driver
  203. [    1.652125] sdhci: Copyright(c) Pierre Ossman
  204. [    1.653061] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
  205. [    1.653665] sdhci-pltfm: SDHCI platform and OF driver helper
  206. [    1.656789] ledtrig-cpu: registered to indicate activity on CPUs
  207. [    1.656937] hid: raw HID events driver (C) Jiri Kosina
  208. [    1.658181] usbcore: registered new interface driver usbhid
  209. [    1.658187] usbhid: USB HID core driver
  210. [    1.660989] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
  211. [    1.660999] [vc_sm_connected_init]: start
  212. [    1.965541] usb 1-1: new high-speed USB device number 2 using xhci_hcd
  213. [    2.096701] [vc_sm_connected_init]: installed successfully
  214. [    2.098695] NET: Registered protocol family 10
  215. [    2.100176] Segment Routing with IPv6
  216. [    2.100261] NET: Registered protocol family 17
  217. [    2.100371] Key type dns_resolver registered
  218. [    2.100740] Registering SWP/SWPB emulation handler
  219. [    2.101027] Loading compiled-in X.509 certificates
  220. [    2.111571] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
  221. [    2.111580] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  222. [    2.111587] usb 1-1: Product: USB2.0 Hub
  223. [    2.112292] uart-pl011 fe201000.serial: there is not valid maps for state default
  224. [    2.112420] uart-pl011 fe201000.serial: cts_event_workaround enabled
  225. [    2.112460] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 38, base_baud = 0) is a PL011 rev2
  226. [    2.113554] hub 1-1:1.0: USB hub found
  227. [    2.113878] hub 1-1:1.0: 4 ports detected
  228. [    2.119406] vc4-drm gpu: bound fe400000.hvs (ops 0xc0e66fe0)
  229. [    2.121808] debugfs: Directory 'fef00700.hdmi' with parent 'vc4-hdmi-0' already present!
  230. [    2.123157] vc4-drm gpu: bound fef00700.hdmi (ops 0xc0e65270)
  231. [    2.124073] debugfs: Directory 'fef05700.hdmi' with parent 'vc4-hdmi-1' already present!
  232. [    2.124782] vc4-drm gpu: bound fef05700.hdmi (ops 0xc0e65270)
  233. [    2.124950] vc4-drm gpu: bound fe004000.txp (ops 0xc0e675c0)
  234. [    2.125076] vc4-drm gpu: bound fe206000.pixelvalve (ops 0xc0e63238)
  235. [    2.125205] vc4-drm gpu: bound fe207000.pixelvalve (ops 0xc0e63238)
  236. [    2.125334] vc4-drm gpu: bound fe20a000.pixelvalve (ops 0xc0e63238)
  237. [    2.125428] vc4-drm gpu: bound fe216000.pixelvalve (ops 0xc0e63238)
  238. [    2.125600] vc4-drm gpu: bound fec12000.pixelvalve (ops 0xc0e63238)
  239. [    2.151053] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
  240. [    2.230628] Console: switching to colour frame buffer device 160x45
  241. [    2.251263] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
  242. [    2.251790] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  243. [    2.253026] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
  244. [    2.253042] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
  245. [    2.290368] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
  246. [    2.296257] printk: console [netcon0] enabled
  247. [    2.296264] netconsole: network logging started
  248. [    2.296272] of_cfs_init
  249. [    2.296287] of_cfs_init: OK
  250. [    2.296575] ALSA device list:
  251. [    2.296584]   #0: vc4-hdmi-0
  252. [    2.296591]   #1: vc4-hdmi-1
  253. [    2.303710] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  254. [    2.305324] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  255. [    2.306952] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  256. [    2.309873] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  257. [    2.311506] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  258. [    2.320821] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
  259. [    2.327161] random: fast init done
  260. [    2.331493] Freeing unused kernel memory: 4096K
  261. [    2.331885] Run /init as init process
  262. [    2.331900]   with arguments:
  263. [    2.331914]     /init
  264. [    2.331935]   with environment:
  265. [    2.331948]     HOME=/
  266. [    2.331961]     TERM=linux
  267. [    2.331974]     boot=UUID=2904-3200
  268. [    2.331986]     disk=UUID=76650237-13d3-450b-b12b-8378887496a7
  269. [    2.382267] mmc1: new high speed SDIO card at address 0001
  270. [    2.394684] Checking disk(s):  UUID=2904-3200 UUID=76650237-13d3-450b-b12b-8378887496a7
  271. [    2.421086] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
  272. [    2.421569] mmcblk0: mmc0:aaaa SC64G 59.5 GiB
  273. [    2.424115]  mmcblk0: p1 p2
  274. [    2.432163] usb 1-1.1: new low-speed USB device number 3 using xhci_hcd
  275. [    2.534560] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
  276. [    2.534581] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  277. [    2.534599] usb 1-1.1: Product: USB Keyboard
  278. [    2.534615] usb 1-1.1: Manufacturer: Logitech
  279. [    2.549699] input: Logitech USB Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C31C.0001/input/input0
  280. [    2.606295] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:01:00.0-1.1/input0
  281. [    2.620545] input: Logitech USB Keyboard Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C31C.0002/input/input1
  282. [    2.675907] input: Logitech USB Keyboard System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C31C.0002/input/input2
  283. [    2.676181] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:01:00.0-1.1/input1
  284. [    3.288904] fsck: CP437: Invalid argument
  285. [    3.289141] fsck: fsck.fat 4.1 (2017-01-24)
  286. [    3.289490] fsck: /dev/mmcblk0p1: 253 files, 63686/65501 clusters
  287. [    3.289916] fsck: LAKKA_DISK: clean, 126/15460352 files, 1961021/61839360 blocks
  288. [    3.696532] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  289. [    4.019006] systemd[1]: System time before build time, advancing clock.
  290. [    4.073752] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  291. [    4.074067] systemd[1]: Detected architecture arm.
  292. [    4.100514] systemd[1]: Set hostname to <Lakka>.
  293. [    4.191858] random: systemd: uninitialized urandom read (16 bytes read)
  294. [    4.192394] systemd[1]: Listening on Journal Socket (/dev/log).
  295. [    4.192559] random: systemd: uninitialized urandom read (16 bytes read)
  296. [    4.192693] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  297. [    4.192743] random: systemd: uninitialized urandom read (16 bytes read)
  298. [    4.193030] systemd[1]: Listening on Journal Socket.
  299. [    4.195437] systemd[1]: Starting Setup NTP servers for timesyncd...
  300. [    4.196021] systemd[1]: Listening on udev Control Socket.
  301. [    4.196298] systemd[1]: Listening on initctl Compatibility Named Pipe.
  302. [    4.196567] systemd[1]: Listening on udev Kernel Socket.
  303. [    4.304202] kernel-overlays-setup: setup base modules
  304. [    4.359411] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/5.10.31
  305. [    4.377152] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
  306. [    4.377280] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
  307. [    4.379945] kernel-overlays-setup: done
  308. [    4.578923] systemd-journald[233]: Received request to flush runtime journal from PID 1
  309. [    5.059223] random: crng init done
  310. [    5.059234] random: 7 urandom warning(s) missed due to ratelimiting
  311. [    5.608006] mc: Linux media interface: v0.10
  312. [    5.660169] videodev: Linux video capture interface: v2.00
  313. [    5.668026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  314. [    5.683086] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
  315. [    5.697211] bcm2835_audio bcm2835_audio: card created with 8 channels
  316. [    5.731174] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  317. [    5.731198] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  318. [    5.732275] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
  319. [    5.732486] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
  320. [    5.741299] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
  321. [    5.741549] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
  322. [    5.741752] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
  323. [    5.741937] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
  324. [    5.741953] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
  325. [    5.741973] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
  326. [    5.741991] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
  327. [    5.742005] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
  328. [    5.742117] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
  329. [    5.748437] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
  330. [    5.748462] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
  331. [    5.760932] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
  332. [    5.760954] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
  333. [    5.766721] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
  334. [    5.766743] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
  335. [    5.776273] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
  336. [    5.823080] rpivid feb10000.codec: Device registered as /dev/video19
  337. [    5.853296] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  338. [    5.872589] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  339. [    5.903716] brcmfmac: F1 signature read @0x18000000=0x15264345
  340. [    5.908510] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  341. [    5.909444] usbcore: registered new interface driver brcmfmac
  342. [    5.947196] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2
  343. [    6.009698] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
  344. [    6.010323] bcmgenet fd580000.ethernet eth0: Link is Down
  345. [    6.175250] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  346. [    6.190675] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  347. [    6.576875] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
  348. [    6.615370] uart-pl011 fe201000.serial: no DMA platform data
  349. [    7.299891] process '/usr/bin/retroarch' started with executable stack
  350. [    9.479525] usb 1-1.3: new full-speed USB device number 4 using xhci_hcd
  351. [    9.573885] usb 1-1.3: New USB device found, idVendor=2563, idProduct=0575, bcdDevice= 2.00
  352. [    9.573896] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  353. [    9.573904] usb 1-1.3: Product: PS3/PC Gamepad
  354. [    9.573911] usb 1-1.3: Manufacturer: SHANWAN
  355. [    9.584228] input: SHANWAN PS3/PC Gamepad as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:2563:0575.0003/input/input3
  356. [    9.584496] hid-generic 0003:2563:0575.0003: input,hidraw2: USB HID v1.10 Gamepad [SHANWAN PS3/PC Gamepad] on usb-0000:01:00.0-1.3/input0
  357. [    9.783059] usb 1-1.3: USB disconnect, device number 4
  358. [   10.248869] usb 1-1.3: new full-speed USB device number 5 using xhci_hcd
  359. [   10.355394] usb 1-1.3: New USB device found, idVendor=045e, idProduct=028e, bcdDevice= 1.10
  360. [   10.355412] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  361. [   10.355426] usb 1-1.3: Product: Controller
  362. [   10.355439] usb 1-1.3: Manufacturer: SHANWAN
  363. [   10.371637] input: Microsoft X-Box 360 pad as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input4
  364. [   10.371889] usbcore: registered new interface driver xpad
  365. [   13.246528] Bluetooth: Core ver 2.22
  366. [   13.246586] NET: Registered protocol family 31
  367. [   13.246593] Bluetooth: HCI device and connection manager initialized
  368. [   13.247384] Bluetooth: HCI socket layer initialized
  369. [   13.247395] Bluetooth: L2CAP socket layer initialized
  370. [   13.247411] Bluetooth: SCO socket layer initialized
  371. [   13.253943] Bluetooth: HCI UART driver ver 2.3
  372. [   13.253955] Bluetooth: HCI UART protocol H4 registered
  373. [   13.254000] Bluetooth: HCI UART protocol Three-wire (H5) registered
  374. [   13.254148] Bluetooth: HCI UART protocol Broadcom registered
  375. [  156.998378] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
  376. [  156.998653] bcmgenet fd580000.ethernet eth0: Link is Down
  377. [  162.063034] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
RAW Paste Data