Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- OCTEON CN7020-AAP pass 1.2, Core clock: 1200 MHz, IO clock: 600 MHz, DDR clock: 667 MHz (1334 Mhz DDR)
- Base DRAM address used by u-boot: 0x10fc00000, size: 0x400000
- DRAM: 4 GiB
- Clearing DRAM...... done
- Using default environment
- SF: Detected MX25L6405D with page size 256 Bytes, erase size 64 KiB, total 8 MiB
- Found valid SPI bootloader at offset: 0x90000, size: 1481840 bytes
- U-Boot 2013.07-JNPR-3.1 (Build time: May 03 2016 - 23:50:19)
- Using DRAM size from environment: 4096 MBytes
- checkboard siege
- SATA0: not available
- SATA1: not available
- SATA BIST STATUS = 0x0
- SRX_300 board revision major:1, minor:6, serial #: CV2116AF1003
- OCTEON CN7020-AAP pass 1.2, Core clock: 1200 MHz, IO clock: 600 MHz, DDR clock: 667 MHz (1334 Mhz DDR)
- Base DRAM address used by u-boot: 0x10f000000, size: 0x1000000
- DRAM: 4 GiB
- Clearing DRAM...... done
- SF: Detected MX25L6405D with page size 256 Bytes, erase size 64 KiB, total 8 MiB
- PCIe: Port 0 link active, 1 lanes, speed gen2
- PCIe: Link timeout on port 1, probably the slot is empty
- PCIe: Port 2 not in PCIe mode, skipping
- Net: octeth0
- Interface 0 has 1 ports (SGMII)
- Type the command 'usb start' to scan for USB storage devices.
- Boot Media: eUSB usb
- Found TPM SLB9660 TT 1.2 by Infineon
- TPM: Startup Error.
- Hit any key to stop autoboot: 0
- Octeon srx_300_ram#
- Octeon srx_300_ram# env set baudrate 115200
- ## Switch baudrate to 115200 bps and press ENTER ...
- Octeon srx_300_ram# usb start
- (Re)start USB...
- USB1:
- Starting the controller
- USB XHCI 1.00
- scanning bus 1 for devices... 1 USB Device(s) found
- USB0:
- Starting the controller
- USB XHCI 1.00
- scanning bus 0 for devices... 2 USB Device(s) found
- scanning usb for storage devices... 1 Storage Device(s) found
- Octeon srx_300_ram# fatload usb 0 0x9f00000 kernel4
- reading kernel4
- 14213320 bytes read in 0 ms
- Octeon srx_300_ram# bootoctlinux 0x9f00000 coremask=0x3 rootdelay=15 rw
- argv[2]: coremask=0x3
- argv[3]: rootdelay=15
- argv[4]: rw
- Allocating memory for ELF segment: addr: 0xffffffff81100000 (adjusted to: 0x1100000), size 0x1edafb0
- ## Loading big-endian Linux kernel with entry point: 0xffffffff816886c0 ...
- Bootloader: Done loading app on coremask: 0x3
- Starting cores:
- 0x3
- [ 0.000000] Linux version 4.19.74 (root@fatboy) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r11086-4fc0a61ed3)) #0 SMP Sat Sep 21 13:12:45 2019
- [ 0.000000] Skipping L2 locking due to reduced L2 cache size
- [ 0.000000] CVMSEG size: 2 cache lines (256 bytes)
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 000d9602 (Cavium Octeon III)
- [ 0.000000] FPU revision is: 00739600
- [ 0.000000] Checking for the multiply/shift bug... no.
- [ 0.000000] Checking for the daddiu bug... no.
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 000000000c000000 @ 0000000003000000 (usable)
- [ 0.000000] memory: 0000000000c00000 @ 000000000f200000 (usable)
- [ 0.000000] memory: 00000000d0000000 @ 0000000020000000 (usable)
- [ 0.000000] memory: 000000000ffff000 @ 00000000f0001000 (usable)
- [ 0.000000] memory: 000000000efff000 @ 0000000100001000 (usable)
- [ 0.000000] memory: 0000000001edafb0 @ 0000000001100000 (usable)
- [ 0.000000] Wasting 278528 bytes for tracking 4352 unused pages
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Using passed Device Tree.
- [ 0.000000] software IO TLB: mapped [mem 0x0742f000-0x0b42f000] (64MB)
- [ 0.000000] Primary instruction cache 78kB, virtually tagged, 39 way, 16 sets, linesize 128 bytes.
- [ 0.000000] Primary data cache 32kB, 32-way, 8 sets, linesize 128 bytes.
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000000000000-0x00000000efffffff]
- [ 0.000000] Normal [mem 0x00000000f0000000-0x000000010effffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000002fd9fff]
- [ 0.000000] node 0: [mem 0x0000000003000000-0x000000000effffff]
- [ 0.000000] node 0: [mem 0x000000000f200000-0x000000000fdfffff]
- [ 0.000000] node 0: [mem 0x0000000020000000-0x00000000efffffff]
- [ 0.000000] node 0: [mem 0x00000000f0001000-0x00000000ffffffff]
- [ 0.000000] node 0: [mem 0x0000000100001000-0x000000010effffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000010effffff]
- [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x500 with crng_init=0
- [ 0.000000] percpu: Embedded 19 pages/cpu s39584 r8192 d30048 u77824
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1027112
- [ 0.000000] Kernel command line: mtdparts=phys_mapped_flash:512k(boot0)ro,512k(boot1)ro,64k(eeprom)ro root=/dev/sda2 rootfstype=squashfs,ext4 rootwait console=ttyS0,115200
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Memory: 3982904K/4173664K available (5692K kernel code, 331K rwdata, 1376K rodata, 7500K init, 16683K bss, 190760K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- [ 0.000000] NR_IRQS: 127
- [ 0.000000] CIB interrupt controller probed: 800107000000e000 23
- [ 0.000000] CIB interrupt controller probed: 800107000000e200 12
- [ 0.000000] CIB interrupt controller probed: 800107000000e400 6
- [ 0.000000] CIB interrupt controller probed: 800107000000ec00 15
- [ 0.000000] CIB interrupt controller probed: 800107000000e600 4
- [ 0.000000] CIB interrupt controller probed: 800107000000e800 11
- [ 0.000000] CIB interrupt controller probed: 800107000000e900 11
- [ 0.654859] clocksource: OCTEON_CVMCOUNT: mask: 0xffffffffffffffff max_cycles: 0x114c1bbbeec, max_idle_ns: 440795229572 ns
- [ 0.665916] Calibrating delay loop (skipped) preset value.. 2400.00 BogoMIPS (lpj=12000000)
- [ 0.674228] pid_max: default: 32768 minimum: 301
- [ 0.678960] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.685541] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.693103] Checking for the daddi bug... no.
- [ 0.697744] rcu: Hierarchical SRCU implementation.
- [ 0.702647] smp: Bringing up secondary CPUs ...
- [ 0.707262] SMP: Booting CPU01 (CoreId 1)...
- [ 0.711532] CPU1 revision is: 000d9602 (Cavium Octeon III)
- [ 0.711535] FPU revision is: 00739600
- [ 0.711634] smp: Brought up 1 node, 2 CPUs
- [ 0.727013] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.736716] futex hash table entries: 512 (order: 4, 65536 bytes)
- [ 0.743125] NET: Registered protocol family 16
- [ 0.751839] PCIe: Initializing port 0
- [ 0.758558] PCIe: BIST2 FAILED for port 0 (0x0000000000000003)
- [ 0.764251] PCIe: Port 0 link active, 1 lanes, speed gen2
- [ 0.889764] PCIe: Initializing port 1
- [ 0.896476] PCIe: BIST2 FAILED for port 1 (0x0000000000000003)
- [ 1.872427] random: fast init done
- [ 2.902169] PCIe: Link timeout on port 1, probably the slot is empty
- [ 2.913895] SCSI subsystem initialized
- [ 2.917609] usbcore: registered new interface driver usbfs
- [ 2.923037] usbcore: registered new interface driver hub
- [ 2.928295] usbcore: registered new device driver usb
- [ 2.933459] PCI host bridge to bus 0000:00
- [ 2.937392] pci_bus 0000:00: root bus resource [mem 0x1000000000000]
- [ 2.943750] pci_bus 0000:00: root bus resource [io 0x0000]
- [ 2.949297] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
- [ 2.956083] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 2.964636] PCI host bridge to bus 0000:01
- [ 2.968579] pci_bus 0000:01: root bus resource [mem 0x11b00f0000000-0x11b0fffffffff] (bus address [0xf0000000-0xfffffffff])
- [ 2.979703] pci_bus 0000:01: root bus resource [io 0x1000-0xffffffff]
- [ 2.986211] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0]
- [ 2.993002] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
- [ 3.002274] pci 0000:01:00.0: BAR 4: assigned [mem 0x11b0100000000-0x11b0100ffffff 64bit pref]
- [ 3.010755] pci 0000:01:00.1: BAR 4: assigned [mem 0x11b0101000000-0x11b0101ffffff 64bit pref]
- [ 3.019341] pci 0000:01:00.0: BAR 2: assigned [mem 0x11b0102000000-0x11b010203ffff 64bit pref]
- [ 3.027951] pci 0000:01:00.0: BAR 0: assigned [mem 0x11b0102040000-0x11b0102047fff 64bit pref]
- [ 3.036553] pci 0000:01:00.1: BAR 0: assigned [mem 0x11b0102048000-0x11b010204ffff 64bit pref]
- [ 3.045746] clocksource: Switched to clocksource OCTEON_CVMCOUNT
- [ 3.052103] NET: Registered protocol family 2
- [ 3.056692] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
- [ 3.064412] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
- [ 3.071857] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 3.078693] TCP: Hash tables configured (established 32768 bind 32768)
- [ 3.085146] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 3.091155] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 3.097719] NET: Registered protocol family 1
- [ 3.139008] platform 1180068000000.uctl: dwc3 controller clock init failure [2].
- [ 3.146291] platform 1180068000000.uctl: clocks initialized.
- [ 3.151939] platform 1180069000000.uctl: dwc3 controller clock init failure [2].
- [ 3.159317] platform 1180069000000.uctl: clocks initialized.
- [ 3.165303] Crashlog allocated RAM at address 0x3f00000
- [ 3.171093] workingset: timestamp_bits=46 max_order=20 bucket_order=0
- [ 3.182247] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 3.188075] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 3.199382] io scheduler noop registered
- [ 3.203139] io scheduler deadline registered (default)
- [ 3.208759] octeon_gpio 1070000000800.gpio-controller: OCTEON GPIO driver probed.
- [ 3.216258] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 3.222814] console [ttyS0] disabled
- [ 3.226260] 1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 44, base_baud = 37500000) is a OCTEON
- [ 3.236067] console [ttyS0] enabled
- [ 3.236067] console [ttyS0] enabled
- [ 3.243007] bootconsole [early0] disabled
- [ 3.243007] bootconsole [early0] disabled
- [ 3.251241] 1180000000c00.serial: ttyS1 at MMIO 0x1180000000c00 (irq = 45, base_baud = 37500000) is a OCTEON
- [ 3.261324] octeon_rng octeon_rng: Octeon Random Number Generator
- [ 3.270010] loop: module loaded
- [ 3.273503] of-flash 1f400000.nor: Can't get bank width from device tree
- [ 3.280494] libphy: mdio_octeon: probed
- [ 3.288925] irq: gpio-controller@1070000000800 didn't like hwirq-0x5 to VIRQ48 mapping (rc=-22)
- [ 3.297882] mdio_octeon 1180000001800.mdio: Probed
- [ 3.302844] libphy: Fixed MDIO Bus: probed
- [ 3.307139] dwc3 1680000000000.xhci: Configuration mismatch. dr_mode forced to host
- [ 3.315002] dwc3 1690000000000.xhci: Configuration mismatch. dr_mode forced to host
- [ 3.322858] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.329410] ehci-pci: EHCI PCI platform driver
- [ 3.333893] ehci-platform: EHCI generic platform driver
- [ 3.339225] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.345425] ohci-platform: OHCI generic platform driver
- [ 3.350933] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 3.356461] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 3.364208] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f065 hci version 0x100 quirks 0x0000000002010010
- [ 3.373650] xhci-hcd xhci-hcd.0.auto: irq 46, io mem 0x1680000000000
- [ 3.380597] hub 1-0:1.0: USB hub found
- [ 3.384419] hub 1-0:1.0: 1 port detected
- [ 3.389057] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 3.394562] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 3.402263] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 3.408870] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 3.417297] hub 2-0:1.0: USB hub found
- [ 3.421076] hub 2-0:1.0: 1 port detected
- [ 3.425237] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 3.430770] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
- [ 3.438519] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f065 hci version 0x100 quirks 0x0000000002010010
- [ 3.447969] xhci-hcd xhci-hcd.1.auto: irq 47, io mem 0x1690000000000
- [ 3.454792] hub 3-0:1.0: USB hub found
- [ 3.458598] hub 3-0:1.0: 1 port detected
- [ 3.462707] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 3.468240] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
- [ 3.475917] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
- [ 3.482532] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 3.491068] hub 4-0:1.0: USB hub found
- [ 3.494885] hub 4-0:1.0: 1 port detected
- [ 3.499135] usbcore: registered new interface driver usb-storage
- [ 3.505178] octeon_wdt: Initial granularity 5 Sec
- [ 3.511618] Interface 0 has 4 ports (SGMII)
- [ 3.515868] Interface 1 has 4 ports (SGMII)
- [ 3.520611] Interface 3 has 4 ports (LOOP)
- [ 3.530166] NET: Registered protocol family 10
- [ 3.536234] Segment Routing with IPv6
- [ 3.539959] NET: Registered protocol family 17
- [ 3.544436] 8021q: 802.1Q VLAN Support v1.8
- [ 3.548783] Bootbus flash: Setting flash for 0MB flash at 0x1fc00000
- [ 3.555148] Probe at base[0x00](0x00000000) past the end of the map(0xffffffffffffffff)
- [ 3.563172] Probe at base[0x00](0x00000000) past the end of the map(0xffffffffffffffff)
- [ 3.571187] Probe at base[0x00](0x00000000) past the end of the map(0xffffffffffffffff)
- [ 3.579206] Failed to register MTD device for flash
- [ 3.584640] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed
- [ 3.594075] Freeing unused kernel memory: 7500K
- [ 3.598648] This architecture does not have kernel memory protection.
- [ 3.605095] Run /init as init process
- [ 3.613876] init: Console is alive
- [ 3.617422] init: - watchdog -
- [ 3.624475] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 3.632146] uhci_hcd: USB Universal Host Controller Interface driver
- [ 3.638759] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 3.651059] init: - preinit -
- [ 3.721305] random: jshn: uninitialized urandom read (4 bytes read)
- [ 3.744462] random: jshn: uninitialized urandom read (4 bytes read)
- [ 3.756041] usb 1-1: new high-speed USB device number 2 using xhci-hcd
- [ 3.766264] random: jshn: uninitialized urandom read (4 bytes read)
- [ 3.782481] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- Press the [f] key and hit [enter] to enter failsafe mode
- Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
- [ 3.938447] usb-storage 1-1:1.0: USB Mass Storage device detected
- [ 3.944749] scsi host0: usb-storage 1-1:1.0
- [ 4.976641] scsi 0:0:0:0: Direct-Access Generic USB Flash Disk 0.00 PQ: 0 ANSI: 6
- [ 4.985958] sd 0:0:0:0: [sda] 15974400 512-byte logical blocks: (8.18 GB/7.62 GiB)
- [ 4.994246] sd 0:0:0:0: [sda] Write Protect is off
- [ 4.999819] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 5.014079] sda: sda1 sda2
- [ 5.019650] sd 0:0:0:0: [sda] Attached SCSI removable disk
- [ 6.844080] procd: - early -
- [ 6.847052] procd: - watchdog -
- [ 7.447810] procd: - watchdog -
- [ 7.451103] procd: - ubus -
- [ 7.456248] urandom_read: 1 callbacks suppressed
- [ 7.456253] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 7.503546] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 7.510055] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 7.516763] procd: - init -
- Please press Enter to activate this console.
- [ 7.613626] urngd: v1.0.0 started.
- [ 7.652575] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 7.654960] random: crng init done
- [ 7.662395] random: 3 urandom warning(s) missed due to ratelimiting
- [ 7.669929] xt_time: kernel timezone is -0000
- [ 7.681237] PPP generic driver version 2.4.2
- [ 7.686031] NET: Registered protocol family 24
- [ 7.694072] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 10.941932] br-lan: port 1(eth0) entered blocking state
- [ 10.947210] br-lan: port 1(eth0) entered disabled state
- [ 10.952648] device eth0 entered promiscuous mode
- [ 10.968836] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
- [ 10.986979] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
- BusyBox v1.31.0 () built-in shell (ash)
- _______ ________ __
- | |.-----.-----.-----.| | | |.----.| |_
- | - || _ | -__| || | | || _|| _|
- |_______|| __|_____|__|__||________||__| |____|
- |__| W I R E L E S S F R E E D O M
- -----------------------------------------------------
- OpenWrt SNAPSHOT, r11086-4fc0a61ed3
- -----------------------------------------------------
- === WARNING! =====================================
- There is no root password defined on this device!
- Use the "passwd" command to set up a new password
- in order to prevent unauthorized SSH logins.
- --------------------------------------------------
- root@OpenWrt:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement