Public Pastes
daily pastebin goal
39%
SHARE
TWEET

Untitled

a guest Oct 27th, 2012 39 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. rio0/input/input4
  2. [    2.570355] isapnp: No Plug & Play device found
  3. [    2.580107] usb 2-4: >new high-speed USB device number 2 using ehci_hcd
  4. [    2.723147] usb 2-4: >New USB device found, idVendor=0bda, idProduct=0158
  5. [    2.723153] usb 2-4: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
  6. [    2.723157] usb 2-4: >Product: USB2.0-CRW
  7. [    2.723161] usb 2-4: >Manufacturer: Generic
  8. [    2.723165] usb 2-4: >SerialNumber: 20071114173400000
  9. [    2.729711] Initializing USB Mass Storage driver...
  10. [    2.729766] usbcore: registered new interface driver usb-storage
  11. [    2.729767] USB Mass Storage support registered.
  12. [    2.732077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  13. [    2.733895] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
  14. [    2.733998] ata1.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) succeeded
  15. [    2.734096] ata1.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) succeeded
  16. [    2.734102] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  17. [    2.734201] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) succeeded
  18. [    2.734299] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) succeeded
  19. [    2.735654] ata1.00: ATA-8: FUJITSU MJA2320BH G2, 8919, max UDMA/100
  20. [    2.735659] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  21. [    2.737394] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
  22. [    2.737509] ata1.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) succeeded
  23. [    2.737515] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  24. [    2.737608] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) succeeded
  25. [    2.737705] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) succeeded
  26. [    2.739209] ata1.00: configured for UDMA/100
  27. [    2.739398] scsi 0:0:0:0: >Direct-Access     ATA      FUJITSU MJA2320B 8919 PQ: 0 ANSI: 5
  28. [    2.739527] sd 0:0:0:0: >[sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
  29. [    2.739545] sd 0:0:0:0: >Attached scsi generic sg0 type 0
  30. [    2.739575] sd 0:0:0:0: >[sda] Write Protect is off
  31. [    2.739578] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
  32. [    2.739613] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  33. [    2.799365]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
  34. [    2.799984] sd 0:0:0:0: >[sda] Attached SCSI disk
  35. [    2.840123] usb 2-5: >new high-speed USB device number 3 using ehci_hcd
  36. [    3.006894] usb 2-5: >New USB device found, idVendor=064e, idProduct=a102
  37. [    3.006899] usb 2-5: >New USB device strings: Mfr=2, Product=1, SerialNumber=3
  38. [    3.006903] usb 2-5: >Product: HP Webcam
  39. [    3.006907] usb 2-5: >Manufacturer: SuYin
  40. [    3.006911] usb 2-5: >SerialNumber: CN0316-S30C-OV02-VH-R03.04.01
  41. [    3.008223] ACPI: Battery Slot [BAT0] (battery present)
  42. [    3.228137] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  43. [    3.244363] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
  44. [    3.246219] ata5.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
  45. [    3.246661] ata5.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
  46. [    3.246667] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  47. [    3.247158] ata5.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
  48. [    3.249087] ata5.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
  49. [    3.249094] ata5.00: ATAPI: Optiarc DVD RW AD-7581S, 4H03, max UDMA/100
  50. [    3.266340] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
  51. [    3.268212] ata5.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
  52. [    3.268656] ata5.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
  53. [    3.268661] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
  54. [    3.269155] ata5.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
  55. [    3.271089] ata5.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
  56. [    3.271096] ata5.00: configured for UDMA/100
  57. [    3.275675] scsi 4:0:0:0: >CD-ROM            Optiarc  DVD RW AD-7581S  4H03 PQ: 0 ANSI: 5
  58. [    3.282636] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  59. [    3.282640] cdrom: Uniform CD-ROM driver Revision: 3.20
  60. [    3.282822] sr 4:0:0:0: >Attached scsi CD-ROM sr0
  61. [    3.282905] sr 4:0:0:0: >Attached scsi generic sg1 type 5
  62. [    3.600137] ata6: SATA link down (SStatus 0 SControl 300)
  63. [    3.600281] Freeing unused kernel memory: 756k freed
  64. [    3.600611] Write protecting the kernel text: 5960k
  65. [    3.600640] Write protecting the kernel read-only data: 2424k
  66. [    3.600642] NX-protecting the kernel data: 4280k
  67. [    3.618120] udevd[108]: starting version 175
  68. [    3.948517] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  69. [    3.948926] r8169 0000:04:00.0: >irq 46 for MSI/MSI-X
  70. [    3.949385] r8169 0000:04:00.0: >eth0: RTL8168d/8111d at 0xf8452000, 00:23:5a:45:9a:5b, XID 081000c0 IRQ 46
  71. [    3.949389] r8169 0000:04:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
  72. [    3.952357] usbcore: registered new interface driver uas
  73. [    3.968293] usb 2-4: >USB disconnect, device number 2
  74. [    3.973589] scsi6 : usb-storage 2-4:1.0
  75. [    3.973688] usbcore: registered new interface driver ums-realtek
  76. [    4.473250] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
  77. [    4.473254] EXT4-fs (sda5): write access will be enabled during recovery
  78. [    9.168548] EXT4-fs (sda5): orphan cleanup on readonly fs
  79. [    9.168558] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 523615
  80. [    9.168629] EXT4-fs (sda5): 1 orphan inode deleted
  81. [    9.168631] EXT4-fs (sda5): recovery complete
  82. [    9.257447] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
  83. [   25.341040] Adding 4160508k swap on /dev/sda6.  Priority:-1 extents:1 across:4160508k
  84. [   25.348928] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  85. [   25.453328] udevd[328]: starting version 175
  86. [   25.481292] lp: driver loaded but no devices found
  87. [   25.781727] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xd2
  88. [   25.781733] ene_ir: PLL freq = 1406
  89. [   25.781734] ene_ir: KB3926D or higher detected
  90. [   25.781748] ene_ir: Firmware regs: c0 01
  91. [   25.781750] ene_ir: Hardware features:
  92. [   25.781751] ene_ir: * Uses GPIO 40 for IR demodulated input
  93. [   25.813529] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
  94. [   25.814339] hp_accel: laptop model unknown, using default axes configuration
  95. [   25.820026] Registered IR keymap rc-rc6-mce
  96. [   25.820137] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input5
  97. [   25.820402] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
  98. [   25.824062] ene_ir: driver has been successfully loaded
  99. [   25.825477] IR NEC protocol handler initialized
  100. [   25.828967] IR RC5(x) protocol handler initialized
  101. [   25.832213] acpi device:07: >registered as cooling_device3
  102. [   25.832255] ACPI: Video Device [EVGA] (multi-head: yes  rom: no  post: no)
  103. [   25.832346] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input6
  104. [   25.833048] IR RC6 protocol handler initialized
  105. [   25.835044] lis3lv02d: 8 bits sensor found
  106. [   25.835441] IR JVC protocol handler initialized
  107. [   25.837392] IR Sony protocol handler initialized
  108. [   25.840947] IR SANYO protocol handler initialized
  109. [   25.842636] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input7
  110. [   25.843728] IR MCE Keyboard/mouse protocol handler initialized
  111. [   25.847753] lirc_dev: IR Remote Control driver registered, major 251
  112. [   25.847992] rc rc0: >lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
  113. [   25.847995] IR LIRC bridge handler initialized
  114. [   25.913003] cfg80211: Calling CRDA to update world regulatory domain
  115. [   25.919377] wmi: Mapper loaded
  116. [   25.948109] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8
  117. [   25.948245] Registered led device: hp::hddprotect
  118. [   25.948270] hp_accel: driver loaded
  119. [   25.957319] ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with Region \PMBA 1 (20120320/utaddress-251)
  120. [   25.957327] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  121. [   25.957329] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
  122. [   25.957333] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMBA 1 (20120320/utaddress-251)
  123. [   25.957337] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  124. [   25.957341] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
  125. [   25.957345] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  126. [   25.957347] lpc_ich: Resource conflict(s) found affecting gpio_ich
  127. [   25.978374] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
  128. [   25.978378] iwlwifi: Copyright(c) 2003-2012 Intel Corporation
  129. [   25.978453] iwlwifi 0000:03:00.0: >pci_resource_len = 0x00002000
  130. [   25.978456] iwlwifi 0000:03:00.0: >pci_resource_base = f8600000
  131. [   25.978459] iwlwifi 0000:03:00.0: >HW Revision ID = 0x0
  132. [   25.978545] iwlwifi 0000:03:00.0: >irq 47 for MSI/MSI-X
  133. [   25.983094] nvidia: module license 'NVIDIA' taints kernel.
  134. [   25.983098] Disabling lock debugging due to kernel taint
  135. [   26.011258] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
  136. [   26.018339] Linux video capture interface: v2.00
  137. [   26.019330] uvcvideo: Found UVC 1.00 device HP Webcam (064e:a102)
  138. [   26.024403] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
  139. [   26.024715] NVRM: loading NVIDIA UNIX x86 Kernel Module  304.43  Sun Aug 19 20:20:21 PDT 2012
  140. [   26.038858] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input9
  141. [   26.039011] usbcore: registered new interface driver uvcvideo
  142. [   26.039013] USB Video Class driver (1.1.1)
  143. [   26.171243] type=1400 audit(1351325945.343:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=502 comm="apparmor_parser"
  144. [   26.171265] type=1400 audit(1351325945.343:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=586 comm="apparmor_parser"
  145. [   26.171699] type=1400 audit(1351325945.343:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=502 comm="apparmor_parser"
  146. [   26.171955] type=1400 audit(1351325945.343:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=502 comm="apparmor_parser"
  147. [   26.172126] type=1400 audit(1351325945.347:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=586 comm="apparmor_parser"
  148. [   26.172388] type=1400 audit(1351325945.347:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=586 comm="apparmor_parser"
  149. [   26.196333] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
  150. [   26.296062] snd_hda_intel 0000:00:1b.0: >power state changed by ACPI to D0
  151. [   26.296073] snd_hda_intel 0000:00:1b.0: >power state changed by ACPI to D0
  152. [   26.296084] hda_intel: position_fix set to 1 for device 103c:306d
  153. [   26.296161] snd_hda_intel 0000:00:1b.0: >irq 48 for MSI/MSI-X
  154. [   26.318591] cfg80211: World regulatory domain updated:
  155. [   26.318596] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  156. [   26.318599] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  157. [   26.318601] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  158. [   26.318603] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  159. [   26.318605] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  160. [   26.318607] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  161. [   26.327335] iwlwifi 0000:03:00.0: >loaded firmware version 8.83.5.1 build 33692
  162. [   26.327601] iwlwifi 0000:03:00.0: >CONFIG_IWLWIFI_DEBUG disabled
  163. [   26.327604] iwlwifi 0000:03:00.0: >CONFIG_IWLWIFI_DEBUGFS enabled
  164. [   26.327606] iwlwifi 0000:03:00.0: >CONFIG_IWLWIFI_DEVICE_TRACING enabled
  165. [   26.327609] iwlwifi 0000:03:00.0: >CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
  166. [   26.327611] iwlwifi 0000:03:00.0: >CONFIG_IWLWIFI_P2P disabled
  167. [   26.327614] iwlwifi 0000:03:00.0: >Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
  168. [   26.327688] iwlwifi 0000:03:00.0: >L1 Enabled; Disabling L0S
  169. [   26.327843] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
  170. [   26.332792] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  171. [   26.344309] input: HP WMI hotkeys as /devices/virtual/input/input10
  172. [   26.354708] iwlwifi 0000:03:00.0: >device EEPROM VER=0x11f, CALIB=0x4
  173. [   26.354713] iwlwifi 0000:03:00.0: >Device SKU: 0xF0
  174. [   26.354716] iwlwifi 0000:03:00.0: >Valid Tx ant: 0x2, Valid Rx ant: 0x3
  175. [   26.354730] iwlwifi 0000:03:00.0: >Tunable channels: 13 802.11bg, 24 802.11a channels
  176. [   26.356524] Registered led device: phy0-led
  177. [   26.356581] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
  178. [   26.394378] ieee80211 phy0: >Selected rate control algorithm 'iwl-agn-rs'
  179. [   26.405737] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
  180. [   26.405978] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
  181. [   26.423478] init: failsafe main process (726) killed by TERM signal
  182. [   26.505765] ppdev: user-space parallel port driver
  183. [   26.519157] Bluetooth: Core ver 2.16
  184. [   26.519193] NET: Registered protocol family 31
  185. [   26.519195] Bluetooth: HCI device and connection manager initialized
  186. [   26.519198] Bluetooth: HCI socket layer initialized
  187. [   26.519199] Bluetooth: L2CAP socket layer initialized
  188. [   26.519205] Bluetooth: SCO socket layer initialized
  189. [   26.541649] type=1400 audit(1351325945.715:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=822 comm="apparmor_parser"
  190. [   26.544918] type=1400 audit(1351325945.719:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=822 comm="apparmor_parser"
  191. [   26.556423] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  192. [   26.556427] Bluetooth: BNEP filters: protocol multicast
  193. [   26.576793] type=1400 audit(1351325945.751:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=842 comm="apparmor_parser"
  194. [   26.577187] type=1400 audit(1351325945.751:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=842 comm="apparmor_parser"
  195. [   26.624087] Bluetooth: RFCOMM TTY layer initialized
  196. [   26.624093] Bluetooth: RFCOMM socket layer initialized
  197. [   26.624095] Bluetooth: RFCOMM ver 1.11
  198. [   26.667926] iwlwifi 0000:03:00.0: >L1 Enabled; Disabling L0S
  199. [   26.671078] iwlwifi 0000:03:00.0: >Radio type=0x1-0x2-0x0
  200. [   26.785021] iwlwifi 0000:03:00.0: >L1 Enabled; Disabling L0S
  201. [   26.788210] iwlwifi 0000:03:00.0: >Radio type=0x1-0x2-0x0
  202. [   26.892081] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  203. [   26.892398] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  204. [   26.960550] r8169 0000:04:00.0: >eth0: link down
  205. [   26.963283] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  206. [   26.963989] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  207. [   27.697472] init: udev-fallback-graphics main process (1155) terminated with status 1
  208. [   27.723020] init: lightdm main process (1166) killed by TERM signal
  209. [   27.744767] init: plymouth-splash main process (1179) terminated with status 1
  210. [   27.805747] psmouse serio1: >synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
  211. [   27.941651] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input13
  212. [   29.843247] NVRM: GPU at 0000:01:00: GPU-6086ab75-ce88-1b6d-74f6-7b58ec89c2ab
  213. [   33.357765] wlan0: authenticate with 4c:60:de:42:6c:87
  214. [   33.359213] wlan0: send auth to 4c:60:de:42:6c:87 (try 1/3)
  215. [   33.361204] wlan0: authenticated
  216. [   33.364124] wlan0: associate with 4c:60:de:42:6c:87 (try 1/3)
  217. [   33.368192] wlan0: RX AssocResp from 4c:60:de:42:6c:87 (capab=0x11 status=0 aid=7)
  218. [   33.369561] wlan0: associated
  219. [   33.369744] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  220. [   50.050415] audit_printk_skb: 57 callbacks suppressed
  221. [   50.050419] type=1701 audit(1351325969.223:31): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=1995 comm="chromium-browse" reason="seccomp" sig=0 syscall=20 compat=0 ip=0xb2f28424 code=0x50000
  222. [   58.047436] type=1701 audit(1351325977.219:32): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=2170 comm="chromium-browse" reason="seccomp" sig=0 syscall=20 compat=0 ip=0xb2f8d424 code=0x50000
  223. [  371.984395] hp_wmi: Unknown key code - 0x20000
  224. [  793.542912] CE: hpet increased min_delta_ns to 20113 nsec
  225. [ 1065.709190] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
  226. [ 1228.482766] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
  227. [ 1228.483408] CPU0: Core temperature/speed normal
  228. [ 1228.597400] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
  229. [ 1228.598045] CPU1: Core temperature/speed normal
  230. [ 1499.988060] [Hardware Error]: Machine check events logged
  231. [ 1528.595321] CPU0: Core temperature above threshold, cpu clock throttled (total events = 3505)
  232. [ 1528.595949] CPU0: Core temperature/speed normal
  233. [ 1528.605847] CPU1: Core temperature above threshold, cpu clock throttled (total events = 76924)
  234. [ 1528.606460] CPU1: Core temperature/speed normal
  235. [ 1649.988081] [Hardware Error]: Machine check events logged
  236. [ 1803.680457] CE: hpet increased min_delta_ns to 30169 nsec
  237. [ 1828.858979] CPU1: Core temperature above threshold, cpu clock throttled (total events = 196997)
  238. [ 1828.859607] CPU1: Core temperature/speed normal
  239. [ 1842.775321] CPU0: Core temperature above threshold, cpu clock throttled (total events = 8622)
  240. [ 1842.775972] CPU0: Core temperature/speed normal
  241. [ 1874.988077] [Hardware Error]: Machine check events logged
  242. [ 1933.249298] hp_wmi: Unknown key code - 0x20000
  243. [ 1933.897047] hp_wmi: Unknown key code - 0x20000
  244. [ 1936.026141] hp_wmi: Unknown key code - 0x20000
  245. [ 2128.856264] CPU1: Core temperature/speed normal
  246. [ 2164.318584] CPU0: Core temperature above threshold, cpu clock throttled (total events = 8707)
  247. [ 2164.319224] CPU0: Core temperature/speed normal
  248. [ 2399.988139] [Hardware Error]: Machine check events logged
  249. [ 3264.172858] hp_wmi: Unknown key code - 0x20000
  250. [ 3269.500838] hp_wmi: Unknown key code - 0x20000
  251. [ 3270.868807] hp_wmi: Unknown key code - 0x20000
  252. [ 3272.404797] hp_wmi: Unknown key code - 0x20000
  253. [ 3272.504839] hp_wmi: Unknown key code - 0x20000
  254. [ 3272.796856] hp_wmi: Unknown key code - 0x20000
  255. [ 3307.544836] hp_wmi: Unknown key code - 0x20000
  256. [ 3593.012099] usb 5-2: >new full-speed USB device number 2 using uhci_hcd
  257. [ 3593.183171] usb 5-2: >New USB device found, idVendor=0e8d, idProduct=0002
  258. [ 3593.183178] usb 5-2: >New USB device strings: Mfr=2, Product=3, SerialNumber=4
  259. [ 3593.183183] usb 5-2: >Product: OT520D USB Device Connected
  260. [ 3593.183205] usb 5-2: >Manufacturer: MediaTek Inc
  261. [ 3593.183209] usb 5-2: >SerialNumber: 53465140000382f
  262. [ 3593.188641] scsi7 : usb-storage 5-2:1.0
  263. [ 3594.196315] scsi 7:0:0:0: >Direct-Access     OT520D U SB Connected          PQ: 0 ANSI: 0 CCS
  264. [ 3594.199290] scsi 7:0:0:1: >Direct-Access     OT520D U SB Connected          PQ: 0 ANSI: 0 CCS
  265. [ 3594.202289] scsi 7:0:0:2: >Direct-Access     OT520D U SB Connected          PQ: 0 ANSI: 0 CCS
  266. [ 3594.210017] sd 7:0:0:0: >Attached scsi generic sg2 type 0
  267. [ 3594.211195] sd 7:0:0:1: >Attached scsi generic sg3 type 0
  268. [ 3594.211897] sd 7:0:0:2: >Attached scsi generic sg4 type 0
  269. [ 3594.214210] sd 7:0:0:0: >[sdb] 1990656 512-byte logical blocks: (1.01 GB/972 MiB)
  270. [ 3594.222173] sd 7:0:0:0: >[sdb] Write Protect is off
  271. [ 3594.222179] sd 7:0:0:0: >[sdb] Mode Sense: 03 00 00 00
  272. [ 3594.232182] sd 7:0:0:0: >[sdb] No Caching mode page present
  273. [ 3594.232188] sd 7:0:0:0: >[sdb] Assuming drive cache: write through
  274. [ 3594.235194] sd 7:0:0:2: >[sdd] 2048 512-byte logical blocks: (1.04 MB/1.00 MiB)
  275. [ 3594.246233] sd 7:0:0:2: >[sdd] Write Protect is off
  276. [ 3594.246240] sd 7:0:0:2: >[sdd] Mode Sense: 03 00 00 00
  277. [ 3594.252059] sd 7:0:0:1: >[sdc] Attached SCSI removable disk
  278. [ 3594.257172] sd 7:0:0:2: >[sdd] No Caching mode page present
  279. [ 3594.257177] sd 7:0:0:2: >[sdd] Assuming drive cache: write through
  280. [ 3594.284173] sd 7:0:0:0: >[sdb] No Caching mode page present
  281. [ 3594.284180] sd 7:0:0:0: >[sdb] Assuming drive cache: write through
  282. [ 3594.294377]  sdb: sdb1
  283. [ 3594.308159] sd 7:0:0:2: >[sdd] No Caching mode page present
  284. [ 3594.308182] sd 7:0:0:2: >[sdd] Assuming drive cache: write through
  285. [ 3594.317324]  sdd:
  286. [ 3594.367247] sd 7:0:0:0: >[sdb] No Caching mode page present
  287. [ 3594.367254] sd 7:0:0:0: >[sdb] Assuming drive cache: write through
  288. [ 3594.367276] sd 7:0:0:0: >[sdb] Attached SCSI removable disk
  289. [ 3594.375179] sd 7:0:0:2: >[sdd] No Caching mode page present
  290. [ 3594.375204] sd 7:0:0:2: >[sdd] Assuming drive cache: write through
  291. [ 3594.375207] sd 7:0:0:2: >[sdd] Attached SCSI removable disk
  292. [ 4447.552356] usb 5-2: >USB disconnect, device number 2
  293. [ 4456.904283] usb 5-2: >new full-speed USB device number 3 using uhci_hcd
  294. [ 4457.069450] usb 5-2: >New USB device found, idVendor=0e8d, idProduct=0002
  295. [ 4457.069457] usb 5-2: >New USB device strings: Mfr=2, Product=3, SerialNumber=4
  296. [ 4457.069480] usb 5-2: >Product: OT520D USB Device Connected
  297. [ 4457.069484] usb 5-2: >Manufacturer: MediaTek Inc
  298. [ 4457.069488] usb 5-2: >SerialNumber: 53465140000382f
  299. [ 4457.074778] scsi8 : usb-storage 5-2:1.0
  300. [ 4458.076609] scsi 8:0:0:0: >Direct-Access     OT520D U SB Connected          PQ: 0 ANSI: 0 CCS
  301. [ 4458.079570] scsi 8:0:0:1: >Direct-Access     OT520D U SB Connected          PQ: 0 ANSI: 0 CCS
  302. [ 4458.082408] scsi 8:0:0:2: >Direct-Access     OT520D U SB Connected          PQ: 0 ANSI: 0 CCS
  303. [ 4458.088386] sd 8:0:0:0: >Attached scsi generic sg2 type 0
  304. [ 4458.089757] sd 8:0:0:1: >Attached scsi generic sg3 type 0
  305. [ 4458.090994] sd 8:0:0:2: >Attached scsi generic sg4 type 0
  306. [ 4458.099362] sd 8:0:0:0: >[sdb] 1990656 512-byte logical blocks: (1.01 GB/972 MiB)
  307. [ 4458.113379] sd 8:0:0:0: >[sdb] Write Protect is off
  308. [ 4458.113385] sd 8:0:0:0: >[sdb] Mode Sense: 03 00 00 00
  309. [ 4458.116328] sd 8:0:0:2: >[sdd] 2048 512-byte logical blocks: (1.04 MB/1.00 MiB)
  310. [ 4458.121314] sd 8:0:0:1: >[sdc] Attached SCSI removable disk
  311. [ 4458.124320] sd 8:0:0:0: >[sdb] No Caching mode page present
  312. [ 4458.124324] sd 8:0:0:0: >[sdb] Assuming drive cache: write through
  313. [ 4458.127311] sd 8:0:0:2: >[sdd] Write Protect is off
  314. [ 4458.127317] sd 8:0:0:2: >[sdd] Mode Sense: 03 00 00 00
  315. [ 4458.137347] sd 8:0:0:2: >[sdd] No Caching mode page present
  316. [ 4458.137371] sd 8:0:0:2: >[sdd] Assuming drive cache: write through
  317. [ 4458.174360] sd 8:0:0:0: >[sdb] No Caching mode page present
  318. [ 4458.174386] sd 8:0:0:0: >[sdb] Assuming drive cache: write through
  319. [ 4458.184560]  sdb: sdb1
  320. [ 4458.187345] sd 8:0:0:2: >[sdd] No Caching mode page present
  321. [ 4458.187371] sd 8:0:0:2: >[sdd] Assuming drive cache: write through
  322. [ 4458.195442]  sdd:
  323. [ 4458.257316] sd 8:0:0:0: >[sdb] No Caching mode page present
  324. [ 4458.257321] sd 8:0:0:0: >[sdb] Assuming drive cache: write through
  325. [ 4458.257343] sd 8:0:0:0: >[sdb] Attached SCSI removable disk
  326. [ 4458.275305] sd 8:0:0:2: >[sdd] No Caching mode page present
  327. [ 4458.275310] sd 8:0:0:2: >[sdd] Assuming drive cache: write through
  328. [ 4458.275313] sd 8:0:0:2: >[sdd] Attached SCSI removable disk
  329. [ 4474.869533] EXT4-fs (sda3): recovery complete
  330. [ 4474.889601] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
  331. [ 5038.664864] hp_wmi: Unknown key code - 0x20000
  332. [ 5038.852843] hp_wmi: Unknown key code - 0x20000
  333. [ 5040.680844] hp_wmi: Unknown key code - 0x20000
  334. [ 5040.900910] hp_wmi: Unknown key code - 0x20000
  335. [ 5041.904866] hp_wmi: Unknown key code - 0x20000
  336. [ 5122.077297] CE: hpet increased min_delta_ns to 45253 nsec
  337. [ 6089.399158] CPU1: Core temperature above threshold, cpu clock throttled (total events = 270219)
  338. [ 6089.399791] CPU1: Core temperature/speed normal
  339. [ 6149.988085] [Hardware Error]: Machine check events logged
  340. [ 6208.462386] CPU0: Core temperature above threshold, cpu clock throttled (total events = 8762)
  341. [ 6208.463038] CPU0: Core temperature/speed normal
  342. [ 6299.988085] [Hardware Error]: Machine check events logged
  343. [ 6397.674450] CPU1: Core temperature above threshold, cpu clock throttled (total events = 317418)
  344. [ 6397.675110] CPU1: Core temperature/speed normal
  345. [ 6508.659797] CPU0: Core temperature above threshold, cpu clock throttled (total events = 10608)
  346. [ 6508.660429] CPU0: Core temperature/speed normal
  347. [ 6524.988066] [Hardware Error]: Machine check events logged
  348. [ 6697.672764] CPU1: Core temperature above threshold, cpu clock throttled (total events = 413078)
  349. [ 6697.673394] CPU1: Core temperature/speed normal
  350. [ 6749.988181] [Hardware Error]: Machine check events logged
  351. [ 6805.765060] hp_wmi: Unknown key code - 0x20000
  352. [ 6809.074461] CPU0: Core temperature above threshold, cpu clock throttled (total events = 12399)
  353. [ 6809.075103] CPU0: Core temperature/speed normal
  354. [ 6824.988156] [Hardware Error]: Machine check events logged
  355. [ 6997.685741] CPU1: Core temperature above threshold, cpu clock throttled (total events = 503768)
  356. [ 6997.686359] CPU1: Core temperature/speed normal
  357. [ 7083.048399] usb 5-2: >USB disconnect, device number 3
  358. [ 7087.488153] [Hardware Error]: Machine check events logged
  359. [ 7348.960260] usb 5-2: >new full-speed USB device number 4 using uhci_hcd
  360. [ 7349.124443] usb 5-2: >New USB device found, idVendor=0e8d, idProduct=0002
  361. [ 7349.124469] usb 5-2: >New USB device strings: Mfr=2, Product=3, SerialNumber=4
  362. [ 7349.124474] usb 5-2: >Product: OT520D USB Device Connected
  363. [ 7349.124479] usb 5-2: >Manufacturer: MediaTek Inc
  364. [ 7349.124501] usb 5-2: >SerialNumber: 53465140000382f
  365. [ 7349.129754] scsi9 : usb-storage 5-2:1.0
  366. [ 7350.133573] scsi 9:0:0:0: >Direct-Access     OT520D U SB Connected          PQ: 0 ANSI: 0 CCS
  367. [ 7350.136447] scsi 9:0:0:1: >Direct-Access     OT520D U SB Connected          PQ: 0 ANSI: 0 CCS
  368. [ 7350.139385] scsi 9:0:0:2: >Direct-Access     OT520D U SB Connected          PQ: 0 ANSI: 0 CCS
  369. [ 7350.143066] sd 9:0:0:0: >Attached scsi generic sg2 type 0
  370. [ 7350.150267] sd 9:0:0:1: >Attached scsi generic sg3 type 0
  371. [ 7350.151750] sd 9:0:0:2: >Attached scsi generic sg4 type 0
  372. [ 7350.154337] sd 9:0:0:0: >[sdb] 1990656 512-byte logical blocks: (1.01 GB/972 MiB)
  373. [ 7350.164593] sd 9:0:0:0: >[sdb] Write Protect is off
  374. [ 7350.164598] sd 9:0:0:0: >[sdb] Mode Sense: 03 00 00 00
  375. [ 7350.172716] sd 9:0:0:2: >[sdd] 2048 512-byte logical blocks: (1.04 MB/1.00 MiB)
  376. [ 7350.175357] sd 9:0:0:0: >[sdb] No Caching mode page present
  377. [ 7350.175382] sd 9:0:0:0: >[sdb] Assuming drive cache: write through
  378. [ 7350.183307] sd 9:0:0:2: >[sdd] Write Protect is off
  379. [ 7350.183312] sd 9:0:0:2: >[sdd] Mode Sense: 03 00 00 00
  380. [ 7350.193309] sd 9:0:0:2: >[sdd] No Caching mode page present
  381. [ 7350.193332] sd 9:0:0:2: >[sdd] Assuming drive cache: write through
  382. [ 7350.200315] sd 9:0:0:1: >[sdc] Attached SCSI removable disk
  383. [ 7350.225302] sd 9:0:0:0: >[sdb] No Caching mode page present
  384. [ 7350.225308] sd 9:0:0:0: >[sdb] Assuming drive cache: write through
  385. [ 7350.240461]  sdb: sdb1
  386. [ 7350.243303] sd 9:0:0:2: >[sdd] No Caching mode page present
  387. [ 7350.243308] sd 9:0:0:2: >[sdd] Assuming drive cache: write through
  388. [ 7350.256474]  sdd:
  389. [ 7350.313293] sd 9:0:0:0: >[sdb] No Caching mode page present
  390. [ 7350.313299] sd 9:0:0:0: >[sdb] Assuming drive cache: write through
  391. [ 7350.313320] sd 9:0:0:0: >[sdb] Attached SCSI removable disk
  392. [ 7350.347300] sd 9:0:0:2: >[sdd] No Caching mode page present
  393. [ 7350.347306] sd 9:0:0:2: >[sdd] Assuming drive cache: write through
  394. [ 7350.347309] sd 9:0:0:2: >[sdd] Attached SCSI removable disk
  395. aravind@aravindPC:~$
RAW Paste Data
Pastebin PRO WINTER Special!
Get 40% OFF Pastebin PRO accounts!
Top