Public Pastes
daily pastebin goal
20%
SHARE
TWEET

Untitled

a guest Apr 30th, 2012 25 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [   26.702201] console [tty0] enabled
  2. [   26.702325] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  3. [   26.702866] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  4. [   26.955585] Memory: 2785984k/4194304k available (2177k kernel code, 45532k reserved, 1006k data, 368k init, 1915136k highmem)
  5. [   26.955600] virtual kernel memory layout:
  6. [   26.955601]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
  7. [   26.955603]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  8. [   26.955605]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
  9. [   26.955607]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
  10. [   26.955609]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
  11. [   26.955611]       .data : 0xc0320434 - 0xc041bdc4   (1006 kB)
  12. [   26.955613]       .text : 0xc0100000 - 0xc0320434   (2177 kB)
  13. [   26.955619] Checking if this processor honours the WP bit even in supervisor mode... Ok.
  14. [   26.955666] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
  15. [   26.955789] hpet clockevent registered
  16. [   27.035711] Calibrating delay using timer specific routine.. 4395.82 BogoMIPS (lpj=8791644)
  17. [   27.035739] Security Framework initialized
  18. [   27.035746] SELinux:  Disabled at boot.
  19. [   27.035766] AppArmor: AppArmor initialized
  20. [   27.035773] Failure registering capabilities with primary security module.
  21. [   27.035786] Mount-cache hash table entries: 512
  22. [   27.035942] Initializing cgroup subsys ns
  23. [   27.035947] Initializing cgroup subsys cpuacct
  24. [   27.035966] CPU: After generic identify, caps: bfebfbff 28100000 00000000 00000000 15bae3bf 00000000 00000001 00000000
  25. [   27.035979] monitor/mwait feature present.
  26. [   27.035982] using mwait in idle threads.
  27. [   27.035990] CPU: L1 I cache: 32K, L1 D cache: 32K
  28. [   27.035994] CPU: L2 cache: 256K
  29. [   27.035997] CPU: L3 cache: 3072K
  30. [   27.036001] CPU: Unsupported number of the siblings 16<7>CPU: After all inits, caps: bfebfbff 28100000 00000000 00003940 15bae3bf 00000000 00000001 00000000
  31. [   27.036017] Compat vDSO mapped to ffffe000.
  32. [   27.036037] Checking 'hlt' instruction... OK.
  33. [   27.052605] SMP alternatives: switching to UP code
  34. [   27.056192] Early unpacking initramfs... done
  35. [   27.845345] ACPI: Core revision 20070126
  36. [   27.845482] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
  37. [   27.870464] CPU0: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz stepping 07
  38. [   27.870489] SMP alternatives: switching to SMP code
  39. [   27.872271] Booting processor 1/1 eip 3000
  40. [   27.883068] Initializing CPU#1
  41. [   28.398193] Calibrating delay using timer specific routine.. 4174.23 BogoMIPS (lpj=8348460)
  42. [   28.398212] CPU: After generic identify, caps: bfebfbff 28100000 00000000 00000000 15bae3bf 00000000 00000001 00000000
  43. [   28.398224] monitor/mwait feature present.
  44. [   28.398231] CPU: L1 I cache: 32K, L1 D cache: 32K
  45. [   28.398235] CPU: L2 cache: 256K
  46. [   28.398238] CPU: L3 cache: 3072K
  47. [   28.398243] CPU: Unsupported number of the siblings 16<7>CPU: After all inits, caps: bfebfbff 28100000 00000000 00003940 15bae3bf 00000000 00000001 00000000
  48. [   28.399819] CPU1: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz stepping 07
  49. [   28.399861] SMP alternatives: switching to SMP code
  50. [   28.401768] Booting processor 2/2 eip 3000
  51. [   28.412470] Initializing CPU#2
  52. [   28.490091] Calibrating delay using timer specific routine.. 4390.12 BogoMIPS (lpj=8780249)
  53. [   28.490106] CPU: After generic identify, caps: bfebfbff 28100000 00000000 00000000 15bae3bf 00000000 00000001 00000000
  54. [   28.490116] monitor/mwait feature present.
  55. [   28.490122] CPU: L1 I cache: 32K, L1 D cache: 32K
  56. [   28.490126] CPU: L2 cache: 256K
  57. [   28.490128] CPU: L3 cache: 3072K
  58. [   28.490132] CPU: Unsupported number of the siblings 16<7>CPU: After all inits, caps: bfebfbff 28100000 00000000 00003940 15bae3bf 00000000 00000001 00000000
  59. [   28.491523] CPU2: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz stepping 07
  60. [   28.491559] SMP alternatives: switching to SMP code
  61. [   28.493455] Booting processor 3/3 eip 3000
  62. [   28.504321] Initializing CPU#3
  63. [   28.581989] Calibrating delay using timer specific routine.. 4390.11 BogoMIPS (lpj=8780236)
  64. [   28.582005] CPU: After generic identify, caps: bfebfbff 28100000 00000000 00000000 15bae3bf 00000000 00000001 00000000
  65. [   28.582016] monitor/mwait feature present.
  66. [   28.582023] CPU: L1 I cache: 32K, L1 D cache: 32K
  67. [   28.582027] CPU: L2 cache: 256K
  68. [   28.582029] CPU: L3 cache: 3072K
  69. [   28.582034] CPU: Unsupported number of the siblings 16<7>CPU: After all inits, caps: bfebfbff 28100000 00000000 00003940 15bae3bf 00000000 00000001 00000000
  70. [   28.583797] CPU3: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz stepping 07
  71. [   28.583839] Total of 4 processors activated (17350.29 BogoMIPS).
  72. [   28.584031] ENABLING IO-APIC IRQs
  73. [   28.584247] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
  74. [   28.730001] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
  75. [   28.750052] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
  76. [   28.770101] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
  77. [   28.790099] Brought up 4 CPUs
  78. [   28.790144] CPU0 attaching sched-domain:
  79. [   28.790149]  domain 0: span 0f
  80. [   28.790153]   groups: 01 02 04 08
  81. [   28.790160] CPU1 attaching sched-domain:
  82. [   28.790163]  domain 0: span 0f
  83. [   28.790166]   groups: 02 04 08 01
  84. [   28.790172] CPU2 attaching sched-domain:
  85. [   28.790174]  domain 0: span 0f
  86. [   28.790177]   groups: 04 08 01 02
  87. [   28.790183] CPU3 attaching sched-domain:
  88. [   28.790185]  domain 0: span 0f
  89. [   28.790188]   groups: 08 01 02 04
  90. [   28.790619] net_namespace: 64 bytes
  91. [   28.790638] Booting paravirtualized kernel on bare hardware
  92. [   28.791371] Time:  4:32:34  Date: 04/30/12
  93. [   28.791415] NET: Registered protocol family 16
  94. [   28.791713] EISA bus registered
  95. [   28.791721] ACPI: bus type pci registered
  96. [   28.792622] PCI: PCI BIOS revision 3.00 entry at 0xef753, last bus=3
  97. [   28.792626] PCI: Using configuration type 1
  98. [   28.792655] Setting up standard PCI resources
  99. [   28.796647] ACPI: EC: Look up EC in DSDT
  100. [   28.802920] ACPI: BIOS _OSI(Linux) query ignored via DMI
  101. [   28.803847] ACPI: Interpreter enabled
  102. [   28.803853] ACPI: (supports S0 S1 S3 S4 S5)
  103. [   28.803898] ACPI: Using IOAPIC for interrupt routing
  104. [   28.804351] ACPI: EC: non-query interrupt received, switching to interrupt mode
  105. [   28.820388] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
  106. [   28.820393] ACPI: EC: driver started in interrupt mode
  107. [   28.820660] ACPI: PCI Root Bridge [PCI0] (0000:00)
  108. [   28.823000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  109. [   28.823474] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
  110. [   28.823740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
  111. [   28.824011] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
  112. [   28.831771] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
  113. [   28.832122] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
  114. [   28.832464] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
  115. [   28.832803] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
  116. [   28.833142] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
  117. [   28.833483] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
  118. [   28.833824] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
  119. [   28.834183] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
  120. [   28.834454] Linux Plug and Play Support v0.97 (c) Adam Belay
  121. [   28.834502] pnp: PnP ACPI init
  122. [   28.834513] ACPI: bus type pnp registered
  123. [   28.839371] pnp: PnP ACPI: found 11 devices
  124. [   28.839375] ACPI: ACPI bus type pnp unregistered
  125. [   28.839382] PnPBIOS: Disabled by ACPI PNP
  126. [   28.839712] PCI: Using ACPI for IRQ routing
  127. [   28.839716] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
  128. [   28.889924] NET: Registered protocol family 8
  129. [   28.889928] NET: Registered protocol family 20
  130. [   28.889980] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  131. [   28.889994] hpet0: 8 64-bit timers, 14318180 Hz
  132. [   28.891051] AppArmor: AppArmor Filesystem Enabled
  133. [   28.893655] Time: tsc clocksource has been installed.
  134. [   28.893675] Switched to high resolution mode on CPU 0
  135. [   28.893839] Switched to high resolution mode on CPU 1
  136. [   28.893916] Switched to high resolution mode on CPU 2
  137. [   28.893983] Switched to high resolution mode on CPU 3
  138. [   28.902640] system 00:05: ioport range 0x680-0x69f has been reserved
  139. [   28.902645] system 00:05: ioport range 0x1004-0x1013 has been reserved
  140. [   28.902650] system 00:05: ioport range 0xffff-0xffff has been reserved
  141. [   28.902654] system 00:05: ioport range 0xffff-0xffff has been reserved
  142. [   28.902659] system 00:05: ioport range 0x400-0x453 has been reserved
  143. [   28.902663] system 00:05: ioport range 0x454-0x457 has been reserved
  144. [   28.902668] system 00:05: ioport range 0x458-0x47f has been reserved
  145. [   28.902672] system 00:05: ioport range 0x500-0x57f has been reserved
  146. [   28.902676] system 00:05: ioport range 0x164e-0x164f has been reserved
  147. [   28.902681] system 00:05: ioport range 0x380-0x387 has been reserved
  148. [   28.902696] system 00:09: iomem range 0xfed1c000-0xfed1ffff could not be reserved
  149. [   28.902701] system 00:09: iomem range 0xfed10000-0xfed17fff could not be reserved
  150. [   28.902706] system 00:09: iomem range 0xfed18000-0xfed18fff could not be reserved
  151. [   28.902711] system 00:09: iomem range 0xfed19000-0xfed19fff could not be reserved
  152. [   28.902715] system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
  153. [   28.902720] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
  154. [   28.902725] system 00:09: iomem range 0xfed90000-0xfed93fff has been reserved
  155. [   28.902730] system 00:09: iomem range 0xff000000-0xffffffff could not be reserved
  156. [   28.902736] system 00:09: iomem range 0xfee00000-0xfeefffff could not be reserved
  157. [   28.902740] system 00:09: iomem range 0xafa00000-0xafa00fff has been reserved
  158. [   28.902752] system 00:0a: iomem range 0x20000000-0x201fffff could not be reserved
  159. [   28.902757] system 00:0a: iomem range 0x40000000-0x401fffff could not be reserved
  160. [   28.933383] PCI: Bridge: 0000:00:1c.0
  161. [   28.933385]   IO window: disabled.
  162. [   28.933396]   MEM window: c2500000-c25fffff
  163. [   28.933403]   PREFETCH window: disabled.
  164. [   28.933413] PCI: Bridge: 0000:00:1c.1
  165. [   28.933419]   IO window: 3000-3fff
  166. [   28.933428]   MEM window: disabled.
  167. [   28.933436]   PREFETCH window: c0400000-c04fffff
  168. [   28.933446] PCI: Bridge: 0000:00:1c.2
  169. [   28.933451]   IO window: 2000-2fff
  170. [   28.933461]   MEM window: c1500000-c24fffff
  171. [   28.933469]   PREFETCH window: c0500000-c14fffff
  172. [   28.933520] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
  173. [   28.933531] PCI: Setting latency timer of device 0000:00:1c.0 to 64
  174. [   28.933571] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
  175. [   28.933581] PCI: Setting latency timer of device 0000:00:1c.1 to 64
  176. [   28.933621] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
  177. [   28.933630] PCI: Setting latency timer of device 0000:00:1c.2 to 64
  178. [   28.933649] NET: Registered protocol family 2
  179. [   28.970583] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  180. [   28.970884] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  181. [   28.971525] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  182. [   28.971895] TCP: Hash tables configured (established 131072 bind 65536)
  183. [   28.971899] TCP reno registered
  184. [   28.982723] checking if image is initramfs... it is
  185. [   30.543912] Freeing initrd memory: 7667k freed
  186. [   30.544079] Simple Boot Flag at 0x44 set to 0x1
  187. [   30.545629] audit: initializing netlink socket (disabled)
  188. [   30.545649] audit(1335760354.992:1): initialized
  189. [   30.545970] highmem bounce pool size: 64 pages
  190. [   30.548982] VFS: Disk quotas dquot_6.5.1
  191. [   30.549091] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  192. [   30.549282] io scheduler noop registered
  193. [   30.549285] io scheduler anticipatory registered
  194. [   30.549289] io scheduler deadline registered
  195. [   30.549306] io scheduler cfq registered (default)
  196. [   30.549321] Boot video device is 0000:00:02.0
  197. [   30.581426] PCI: Setting latency timer of device 0000:00:1c.0 to 64
  198. [   30.581521] assign_interrupt_mode Found MSI capability
  199. [   30.581599] Allocate Port Service[0000:00:1c.0:pcie00]
  200. [   30.581760] PCI: Setting latency timer of device 0000:00:1c.1 to 64
  201. [   30.581854] assign_interrupt_mode Found MSI capability
  202. [   30.581928] Allocate Port Service[0000:00:1c.1:pcie00]
  203. [   30.582084] PCI: Setting latency timer of device 0000:00:1c.2 to 64
  204. [   30.582177] assign_interrupt_mode Found MSI capability
  205. [   30.582251] Allocate Port Service[0000:00:1c.2:pcie00]
  206. [   30.582299] Allocate Port Service[0000:00:1c.2:pcie02]
  207. [   30.582665] isapnp: Scanning for PnP cards...
  208. [   30.936718] isapnp: No Plug & Play device found
  209. [   30.975410] Real Time Clock Driver v1.12ac
  210. [   30.975777] hpet_resources: 0xfed00000 is busy
  211. [   30.975826] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
  212. [   30.977687] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
  213. [   30.977789] input: Macintosh mouse button emulation as /devices/virtual/input/input0
  214. [   30.977949] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  215. [   30.989116] serio: i8042 KBD port at 0x60,0x64 irq 1
  216. [   30.989125] serio: i8042 AUX port at 0x60,0x64 irq 12
  217. [   31.004873] mice: PS/2 mouse device common for all mice
  218. [   31.005030] EISA: Probing bus 0 at eisa.0
  219. [   31.005039] Cannot allocate resource for EISA slot 1
  220. [   31.005043] Cannot allocate resource for EISA slot 2
  221. [   31.005047] Cannot allocate resource for EISA slot 3
  222. [   31.005050] Cannot allocate resource for EISA slot 4
  223. [   31.005074] EISA: Detected 0 cards.
  224. [   31.005078] cpuidle: using governor ladder
  225. [   31.005082] cpuidle: using governor menu
  226. [   31.005212] NET: Registered protocol family 1
  227. [   31.005250] Using IPI No-Shortcut mode
  228. [   31.005289] registered taskstats version 1
  229. [   31.005428]   Magic number: 8:142:516
  230. [   31.005480] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  231. [   31.005484] EDD information not available.
  232. [   31.005628] Freeing unused kernel memory: 368k freed
  233. [   31.016934] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
  234. [   32.383625] fuse init (API version 7.9)
  235. [   32.425455] ACPI: SSDT ACE70798, 0727 (r1  PmRef  Cpu0Cst     3001 INTL 20100121)
  236. [   32.426813] Monitor-Mwait will be used to enter C-1 state
  237. [   32.426819] Monitor-Mwait will be used to enter C-2 state
  238. [   32.426830] ACPI: Processor [CPU0] (supports 8 throttling states)
  239. [   32.427558] ACPI: SSDT ACE71A98, 0303 (r1  PmRef    ApIst     3000 INTL 20100121)
  240. [   32.428446] ACPI: SSDT ACE6FD98, 0119 (r1  PmRef    ApCst     3000 INTL 20100121)
  241. [   32.429817] ACPI: Processor [CPU1] (supports 8 throttling states)
  242. [   32.431631] ACPI: Processor [CPU2] (supports 8 throttling states)
  243. [   32.433379] ACPI: Processor [CPU3] (supports 8 throttling states)
  244. [   32.433404] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
  245. [   32.433425] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
  246. [   32.433440] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
  247. [   32.433455] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
  248. [   32.435729] ACPI Exception (thermal-0339): AE_BAD_DATA, No critical threshold [20070126]
  249. [   32.803269] SCSI subsystem initialized
  250. [   32.957937] libata version 3.00 loaded.
  251. [   32.995411] usbcore: registered new interface driver usbfs
  252. [   32.995451] ahci 0000:00:1f.2: version 3.0
  253. [   32.995468] usbcore: registered new interface driver hub
  254. [   32.995503] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
  255. [   32.995586] ahci 0000:00:1f.2: nr_ports (6) and implemented port map (0x10) don't match, using nr_ports
  256. [   32.995593] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x3f
  257. [   32.998571] usbcore: registered new device driver usb
  258. [   33.995995] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports ? Gbps 0x3f impl SATA mode
  259. [   33.996004] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
  260. [   33.996015] PCI: Setting latency timer of device 0000:00:1f.2 to 64
  261. [   33.996323] scsi0 : ahci
  262. [   33.996429] scsi1 : ahci
  263. [   33.996512] scsi2 : ahci
  264. [   33.996594] scsi3 : ahci
  265. [   33.996675] scsi4 : ahci
  266. [   33.996756] scsi5 : ahci
  267. [   33.996915] ata1: SATA max UDMA/133 abar m2048@0xc2607000 port 0xc2607100 irq 220
  268. [   33.996925] ata2: SATA max UDMA/133 abar m2048@0xc2607000 port 0xc2607180 irq 220
  269. [   33.996933] ata3: SATA max UDMA/133 abar m2048@0xc2607000 port 0xc2607200 irq 220
  270. [   33.996941] ata4: SATA max UDMA/133 abar m2048@0xc2607000 port 0xc2607280 irq 220
  271. [   33.996949] ata5: SATA max UDMA/133 abar m2048@0xc2607000 port 0xc2607300 irq 220
  272. [   33.996957] ata6: SATA max UDMA/133 abar m2048@0xc2607000 port 0xc2607380 irq 220
  273. [   34.307616] ata1: SATA link down (SStatus 0 SControl 0)
  274. [   34.619264] ata2: SATA link down (SStatus 0 SControl 0)
  275. [   34.930917] ata3: SATA link down (SStatus 0 SControl 0)
  276. [   35.242571] ata4: SATA link down (SStatus 0 SControl 0)
  277. [   35.718049] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  278. [   35.876126] ata5.00: ATAPI: hp       CDDVDW TS-L633R, 0400, max UDMA/100, ATAPI AN
  279. [   36.031961] ata5.00: configured for UDMA/100
  280. [   36.341358] ata6: SATA link down (SStatus 0 SControl 0)
  281. [   36.341995] scsi 4:0:0:0: CD-ROM            hp       CDDVDW TS-L633R  0400 PQ: 0 ANSI: 5
  282. [   36.342166] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17
  283. [   36.342192] PCI: Setting latency timer of device 0000:00:1a.0 to 64
  284. [   36.342202] ehci_hcd 0000:00:1a.0: EHCI Host Controller
  285. [   36.342438] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
  286. [   36.346379] ehci_hcd 0000:00:1a.0: debug port 2
  287. [   36.346394] PCI: cache line size of 32 is not supported by device 0000:00:1a.0
  288. [   36.346415] ehci_hcd 0000:00:1a.0: irq 17, io mem 0xc2609000
  289. [   36.357184] Driver 'sr' needs updating - please use bus_type methods
  290. [   36.358841] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  291. [   36.359095] usb usb1: configuration #1 chosen from 1 choice
  292. [   36.359150] hub 1-0:1.0: USB hub found
  293. [   36.359163] hub 1-0:1.0: 2 ports detected
  294. [   36.364293] sr0: scsi3-mmc drive: 47x/62x writer dvd-ram cd/rw xa/form2 cdda tray
  295. [   36.364299] Uniform CD-ROM driver Revision: 3.20
  296. [   36.364369] sr 4:0:0:0: Attached scsi CD-ROM sr0
  297. [   36.371520] sr 4:0:0:0: Attached scsi generic sg0 type 5
  298. [   36.461367] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 20
  299. [   36.461392] PCI: Setting latency timer of device 0000:00:1d.0 to 64
  300. [   36.461399] ehci_hcd 0000:00:1d.0: EHCI Host Controller
  301. [   36.461442] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  302. [   36.465362] ehci_hcd 0000:00:1d.0: debug port 2
  303. [   36.465373] PCI: cache line size of 32 is not supported by device 0000:00:1d.0
  304. [   36.465389] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc2608000
  305. [   36.477201] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  306. [   36.477355] usb usb2: configuration #1 chosen from 1 choice
  307. [   36.477394] hub 2-0:1.0: USB hub found
  308. [   36.477402] hub 2-0:1.0: 2 ports detected
  309. [   36.581178] r8169 Gigabit Ethernet driver 2.2LK loaded
  310. [   36.581224] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 16
  311. [   36.581255] PCI: Setting latency timer of device 0000:02:00.0 to 64
  312. [   36.581270] r8169 0000:02:00.0: unknown MAC (43a00000)
  313. [   36.581788] eth0: RTL8169 at 0xf8842000, 44:1e:a1:db:d8:2c, XID 40a00000 IRQ 219
  314. [   36.700959] usb 1-1: new high speed USB device using ehci_hcd and address 2
  315. [   36.833293] usb 1-1: configuration #1 chosen from 1 choice
  316. [   36.833447] hub 1-1:1.0: USB hub found
  317. [   36.833540] hub 1-1:1.0: 6 ports detected
  318. [   37.176424] usb 2-1: new high speed USB device using ehci_hcd and address 2
  319. [   37.308772] usb 2-1: configuration #1 chosen from 1 choice
  320. [   37.308923] hub 2-1:1.0: USB hub found
  321. [   37.309015] hub 2-1:1.0: 6 ports detected
  322. [   37.612066] usb 1-1.3: new full speed USB device using ehci_hcd and address 3
  323. [   37.695621] ISO 9660 Extensions: Microsoft Joliet Level 3
  324. [   37.707381] usb 1-1.3: configuration #1 chosen from 1 choice
  325. [   37.806759] ISO 9660 Extensions: RRIP_1991A
  326. [   37.907738] usb 2-1.5: new high speed USB device using ehci_hcd and address 3
  327. [   38.046715] usb 2-1.5: configuration #1 chosen from 1 choice
  328. [   38.077424] Registering unionfs 1.4
  329. [   38.077428] unionfs: debugging is not enabled
  330. [   38.090792] loop: module loaded
  331. [   38.337860] squashfs: version 3.3 (2007/10/31) Phillip Lougher
  332. [  179.666295] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  333. [  179.731831] input: PC Speaker as /devices/platform/pcspkr/input/input2
  334. [  179.915821] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  335. [  180.357804] ACPI: AC Adapter [ACAD] (on-line)
  336. [  180.414626] ACPI: WMI-Acer: Mapper loaded
  337. [  180.424327] input: Power Button (FF) as /devices/virtual/input/input3
  338. [  180.504267] ACPI: Power Button (FF) [PWRF]
  339. [  180.504321] input: Lid Switch as /devices/virtual/input/input4
  340. [  180.542937] ACPI: Lid Switch [LID0]
  341. [  180.542988] input: Power Button (CM) as /devices/virtual/input/input5
  342. [  180.610786] ACPI: Power Button (CM) [PWRB]
  343. [  180.823296] ACPI: Battery Slot [BAT0] (battery present)
  344. [  180.925060] Linux video capture interface: v2.00
  345. [  180.980352] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:17/LNXVIDEO:00/input/input6
  346. [  181.016835] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
  347. [  181.018980] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
  348. [  181.064831] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
  349. [  181.197790] uvcvideo: Found UVC 1.00 device HP Webcam-101 (0c45:6321)
  350. [  181.210121] usbcore: registered new interface driver uvcvideo
  351. [  181.210125] USB Video Class driver (v0.1.0)
  352. [  181.807617] Unable to query Synaptics hardware.
  353. [  182.640518] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
  354. [  182.779456] ip_tables: (C) 2000-2006 Netfilter Core Team
  355. [  184.002194] No dock devices found.
  356. [  187.318502] apm: BIOS not found.
  357. [  187.623777] lp: driver loaded but no devices found
  358. [  187.709462] ppdev: user-space parallel port driver
  359. [  192.844316] r8169: eth0: link up
  360. [  193.192671] Bluetooth: Core ver 2.11
  361. [  193.192994] NET: Registered protocol family 31
  362. [  193.193002] Bluetooth: HCI device and connection manager initialized
  363. [  193.193011] Bluetooth: HCI socket layer initialized
  364. [  193.339593] Bluetooth: L2CAP ver 2.9
  365. [  193.339604] Bluetooth: L2CAP socket layer initialized
  366. [  193.344417] Bluetooth: RFCOMM socket layer initialized
  367. [  193.344440] Bluetooth: RFCOMM TTY layer initialized
  368. [  193.344445] Bluetooth: RFCOMM ver 1.8
  369. [  195.725328] NET: Registered protocol family 17
  370. [  198.665494] mtrr: type mismatch for b1fe0000,10000 old: write-back new: write-combining
  371. [  198.665531] mtrr: type mismatch for b1fc0000,20000 old: write-back new: write-combining
  372. [  198.665564] mtrr: type mismatch for b1f80000,40000 old: write-back new: write-combining
  373. [  198.665589] mtrr: type mismatch for b1f00000,80000 old: write-back new: write-combining
  374. [  198.665616] mtrr: type mismatch for b1e00000,100000 old: write-back new: write-combining
  375. [  198.665640] mtrr: type mismatch for b1c00000,200000 old: write-back new: write-combining
  376. [  198.665664] mtrr: type mismatch for b1800000,400000 old: write-back new: write-combining
  377. [  198.665688] mtrr: type mismatch for b1000000,800000 old: write-back new: write-combining
  378. [  198.665712] mtrr: type mismatch for b0000000,1000000 old: write-back new: write-combining
  379. [  210.662542] NET: Registered protocol family 10
  380. [  210.663042] lo: Disabled Privacy Extensions
  381. [  221.128312] eth0: no IPv6 routers present
  382. [  231.520011] CPU0 attaching NULL sched-domain.
  383. [  231.520022] CPU1 attaching NULL sched-domain.
  384. [  231.520027] CPU2 attaching NULL sched-domain.
  385. [  231.520031] CPU3 attaching NULL sched-domain.
  386. [  231.546279] CPU0 attaching sched-domain:
  387. [  231.546287]  domain 0: span 0f
  388. [  231.546291]   groups: 01 02 04 08
  389. [  231.546303] CPU1 attaching sched-domain:
  390. [  231.546308]  domain 0: span 0f
  391. [  231.546312]   groups: 02 04 08 01
  392. [  231.546322] CPU2 attaching sched-domain:
  393. [  231.546326]  domain 0: span 0f
  394. [  231.546330]   groups: 04 08 01 02
  395. [  231.546339] CPU3 attaching sched-domain:
  396. [  231.546343]  domain 0: span 0f
  397. [  231.546347]   groups: 08 01 02 04
  398. [  360.409832] usb 2-1.1: new full speed USB device using ehci_hcd and address 4
  399. [  360.504165] usb 2-1.1: configuration #1 chosen from 1 choice
  400. [  361.795162] usbcore: registered new interface driver libusual
  401. [  361.827527] Initializing USB Mass Storage driver...
  402. [  361.827691] scsi6 : SCSI emulation for USB Mass Storage devices
  403. [  361.827744] usbcore: registered new interface driver usb-storage
  404. [  361.827747] USB Mass Storage support registered.
  405. [  361.827909] usb-storage: device found at 4
  406. [  361.827912] usb-storage: waiting for device to settle before scanning
  407. [  366.818923] usb-storage: device scan complete
  408. [  366.820566] scsi 6:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 0
  409. [  366.843492] sr1: scsi-1 drive
  410. [  366.843607] sr 6:0:0:0: Attached scsi CD-ROM sr1
  411. [  366.843702] sr 6:0:0:0: Attached scsi generic sg1 type 5
  412. [  369.560479] ISO 9660 Extensions: Microsoft Joliet Level 1
  413. [  369.564484] ISOFS: changing to secondary root
  414. [  564.150113] usb 1-1.3: USB disconnect, address 3
  415. [ 2690.705003] r8169: eth0: link up
  416. [ 2832.882682] eth0: no IPv6 routers present
  417. ubuntu@ubuntu:~$
RAW Paste Data
Pastebin PRO WINTER Special!
Get 40% OFF Pastebin PRO accounts!
Top