API tools faq
paste
Advertisement
Guest User

HiKey960 v5.1-rc3-51-g2f1d4e24d91b

a guest
Dec 4th, 2019
227
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 33.08 KB | None | 0 0
raw download clone embed print report
  1. EFI stub: Booting Linux Kernel...
  2. EFI stub: Using DTB from configuration table
  3. EFI stub: Exiting boot services and installing virtual address map...
  4. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  5. [ 0.000000] Linux version 5.1.0-rc3-00051-g2f1d4e24d91b (jerome@matebook) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #265 SMP PREEMPT Wed Dec 4 14:04:38 CET 2019
  6. [ 0.000000] Machine model: HiKey960
  7. [ 0.000000] earlycon: pl11 at MMIO 0x00000000fff32000 (options '')
  8. [ 0.000000] printk: bootconsole [pl11] enabled
  9. [ 0.000000] printk: debug: ignoring loglevel setting.
  10. [ 0.000000] efi: Getting EFI parameters from FDT:
  11. [ 0.000000] efi: EFI v2.60 by EDK II
  12. [ 0.000000] efi: MEMATTR=0xbe7dc118 MEMRESERVE=0xba6e6018
  13. [ 0.000000] cma: Reserved 32 MiB at 0x00000000bc400000
  14. [ 0.000000] NUMA: No NUMA configuration found
  15. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000bfffffff]
  16. [ 0.000000] NUMA: NODE_DATA [mem 0xbf9e1840-0xbf9e2fff]
  17. [ 0.000000] Zone ranges:
  18. [ 0.000000] DMA32 [mem 0x0000000000000000-0x00000000bfffffff]
  19. [ 0.000000] Normal empty
  20. [ 0.000000] Movable zone start for each node
  21. [ 0.000000] Early memory node ranges
  22. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001abfffff]
  23. [ 0.000000] node 0: [mem 0x000000001ad88000-0x0000000031ffffff]
  24. [ 0.000000] node 0: [mem 0x0000000032101000-0x000000003dffffff]
  25. [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000089b7ffff]
  26. [ 0.000000] node 0: [mem 0x0000000089cc0000-0x00000000ba49ffff]
  27. [ 0.000000] node 0: [mem 0x00000000ba4a0000-0x00000000ba6dffff]
  28. [ 0.000000] node 0: [mem 0x00000000ba6e0000-0x00000000ba6e7fff]
  29. [ 0.000000] node 0: [mem 0x00000000ba6e8000-0x00000000ba6ebfff]
  30. [ 0.000000] node 0: [mem 0x00000000ba6ec000-0x00000000bf6affff]
  31. [ 0.000000] node 0: [mem 0x00000000bf6b0000-0x00000000bf6effff]
  32. [ 0.000000] node 0: [mem 0x00000000bf6f0000-0x00000000bf6fffff]
  33. [ 0.000000] node 0: [mem 0x00000000bf700000-0x00000000bf74ffff]
  34. [ 0.000000] node 0: [mem 0x00000000bf750000-0x00000000bfffffff]
  35. [ 0.000000] Zeroed struct page in unavailable ranges: 624 pages
  36. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000bfffffff]
  37. [ 0.000000] On node 0 totalpages: 777271
  38. [ 0.000000] DMA32 zone: 12288 pages used for memmap
  39. [ 0.000000] DMA32 zone: 0 pages reserved
  40. [ 0.000000] DMA32 zone: 777271 pages, LIFO batch:63
  41. [ 0.000000] psci: probing for conduit method from DT.
  42. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  43. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  44. [ 0.000000] psci: Trusted OS migration not required
  45. [ 0.000000] psci: SMC Calling Convention v1.1
  46. [ 0.000000] random: get_random_bytes called from start_kernel+0xa4/0x4cc with crng_init=0
  47. [ 0.000000] percpu: Embedded 24 pages/cpu @(____ptrval____) s61336 r8192 d28776 u98304
  48. [ 0.000000] pcpu-alloc: s61336 r8192 d28776 u98304 alloc=24*4096
  49. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  50. [ 0.000000] Detected VIPT I-cache on CPU0
  51. [ 0.000000] CPU features: detected: ARM erratum 845719
  52. [ 0.000000] Speculative Store Bypass Disable mitigation not required
  53. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 764983
  54. [ 0.000000] Policy zone: DMA32
  55. [ 0.000000] Kernel command line: BOOT_IMAGE=/Image console=tty0 console=ttyAMA6,115200n8 earlycon=pl011,0xfff32000 root=/dev/disk/by-partlabel/system rootwait rw ignore_loglevel efi=noruntime
  56. [ 0.000000] Memory: 2982236K/3109084K available (14012K kernel code, 2570K rwdata, 6520K rodata, 2176K init, 465K bss, 94080K reserved, 32768K cma-reserved)
  57. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  58. [ 0.000000] ftrace: allocating 50293 entries in 197 pages
  59. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  60. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
  61. [ 0.000000] Tasks RCU enabled.
  62. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  63. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
  64. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  65. [ 0.000000] GIC: Using split EOI/Deactivate mode
  66. [ 0.000000] arch_timer: cp15 timer(s) running at 1.92MHz (phys).
  67. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
  68. [ 0.000005] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
  69. [ 0.008506] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58334160866034 ns
  70. [ 0.018932] Console: colour dummy device 80x25
  71. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  72. [ 0.000000] Linux version 5.1.0-rc3-00051-g2f1d4e24d91b (jerome@matebook) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #265 SMP PREEMPT Wed Dec 4 14:04:38 CET 2019
  73. [ 0.000000] Machine model: HiKey960
  74. [ 0.000000] earlycon: pl11 at MMIO 0x00000000fff32000 (options '')
  75. [ 0.000000] printk: bootconsole [pl11] enabled
  76. [ 0.000000] printk: debug: ignoring loglevel setting.
  77. [ 0.000000] efi: Getting EFI parameters from FDT:
  78. [ 0.000000] efi: EFI v2.60 by EDK II
  79. [ 0.000000] efi: MEMATTR=0xbe7dc118 MEMRESERVE=0xba6e6018
  80. [ 0.000000] cma: Reserved 32 MiB at 0x00000000bc400000
  81. [ 0.000000] NUMA: No NUMA configuration found
  82. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000bfffffff]
  83. [ 0.000000] NUMA: NODE_DATA [mem 0xbf9e1840-0xbf9e2fff]
  84. [ 0.000000] Zone ranges:
  85. [ 0.000000] DMA32 [mem 0x0000000000000000-0x00000000bfffffff]
  86. [ 0.000000] Normal empty
  87. [ 0.000000] Movable zone start for each node
  88. [ 0.000000] Early memory node ranges
  89. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001abfffff]
  90. [ 0.000000] node 0: [mem 0x000000001ad88000-0x0000000031ffffff]
  91. [ 0.000000] node 0: [mem 0x0000000032101000-0x000000003dffffff]
  92. [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000089b7ffff]
  93. [ 0.000000] node 0: [mem 0x0000000089cc0000-0x00000000ba49ffff]
  94. [ 0.000000] node 0: [mem 0x00000000ba4a0000-0x00000000ba6dffff]
  95. [ 0.000000] node 0: [mem 0x00000000ba6e0000-0x00000000ba6e7fff]
  96. [ 0.000000] node 0: [mem 0x00000000ba6e8000-0x00000000ba6ebfff]
  97. [ 0.000000] node 0: [mem 0x00000000ba6ec000-0x00000000bf6affff]
  98. [ 0.000000] node 0: [mem 0x00000000bf6b0000-0x00000000bf6effff]
  99. [ 0.000000] node 0: [mem 0x00000000bf6f0000-0x00000000bf6fffff]
  100. [ 0.000000] node 0: [mem 0x00000000bf700000-0x00000000bf74ffff]
  101. [ 0.000000] node 0: [mem 0x00000000bf750000-0x00000000bfffffff]
  102. [ 0.000000] Zeroed struct page in unavailable ranges: 624 pages
  103. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000bfffffff]
  104. [ 0.000000] On node 0 totalpages: 777271
  105. [ 0.000000] DMA32 zone: 12288 pages used for memmap
  106. [ 0.000000] DMA32 zone: 0 pages reserved
  107. [ 0.000000] DMA32 zone: 777271 pages, LIFO batch:63
  108. [ 0.000000] psci: probing for conduit method from DT.
  109. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  110. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  111. [ 0.000000] psci: Trusted OS migration not required
  112. [ 0.000000] psci: SMC Calling Convention v1.1
  113. [ 0.000000] random: get_random_bytes called from start_kernel+0xa4/0x4cc with crng_init=0
  114. [ 0.000000] percpu: Embedded 24 pages/cpu @(____ptrval____) s61336 r8192 d28776 u98304
  115. [ 0.000000] pcpu-alloc: s61336 r8192 d28776 u98304 alloc=24*4096
  116. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  117. [ 0.000000] Detected VIPT I-cache on CPU0
  118. [ 0.000000] CPU features: detected: ARM erratum 845719
  119. [ 0.000000] Speculative Store Bypass Disable mitigation not required
  120. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 764983
  121. [ 0.000000] Policy zone: DMA32
  122. [ 0.000000] Kernel command line: BOOT_IMAGE=/Image console=tty0 console=ttyAMA6,115200n8 earlycon=pl011,0xfff32000 root=/dev/disk/by-partlabel/system rootwait rw ignore_loglevel efi=noruntime
  123. [ 0.000000] Memory: 2982236K/3109084K available (14012K kernel code, 2570K rwdata, 6520K rodata, 2176K init, 465K bss, 94080K reserved, 32768K cma-reserved)
  124. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  125. [ 0.000000] ftrace: allocating 50293 entries in 197 pages
  126. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  127. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
  128. [ 0.000000] Tasks RCU enabled.
  129. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  130. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
  131. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  132. [ 0.000000] GIC: Using split EOI/Deactivate mode
  133. [ 0.000000] arch_timer: cp15 timer(s) running at 1.92MHz (phys).
  134. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
  135. [ 0.000005] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
  136. [ 0.008506] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58334160866034 ns
  137. [ 0.018932] Console: colour dummy device 80x25
  138. [ 0.442916] printk: console [tty0] enabled
  139. [ 0.447248] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
  140. [ 0.457521] pid_max: default: 32768 minimum: 301
  141. [ 0.462286] LSM: Security Framework initializing
  142. [ 0.468429] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  143. [ 0.476491] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  144. [ 0.483704] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  145. [ 0.490541] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  146. [ 0.498399] *** VALIDATE proc ***
  147. [ 0.502021] *** VALIDATE cgroup1 ***
  148. [ 0.505654] *** VALIDATE cgroup2 ***
  149. [ 0.533376] ASID allocator initialised with 32768 entries
  150. [ 0.546896] rcu: Hierarchical SRCU implementation.
  151. [ 0.561213] EFI runtime services will be disabled.
  152. [ 0.574114] smp: Bringing up secondary CPUs ...
  153. [ 0.611153] Detected VIPT I-cache on CPU1
  154. [ 0.611248] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  155. [ 0.643081] Detected VIPT I-cache on CPU2
  156. [ 0.643115] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  157. [ 0.675106] Detected VIPT I-cache on CPU3
  158. [ 0.675130] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  159. [ 0.708719] CPU features: detected: ARM erratum 858921
  160. [ 0.708728] Detected VIPT I-cache on CPU4
  161. [ 0.708736] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU4: 0x00000000101122
  162. [ 0.708745] CPU features: Unsupported CPU feature variation detected.
  163. [ 0.708802] arch_timer: Enabling local workaround for ARM erratum 858921
  164. [ 0.708811] arch_timer: CPU4: Trapping CNTVCT access
  165. [ 0.708817] CPU4: Booted secondary processor 0x0000000100 [0x410fd091]
  166. [ 0.739132] Detected VIPT I-cache on CPU5
  167. [ 0.739138] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU5: 0x00000000101122
  168. [ 0.739147] arch_timer: Enabling local workaround for ARM erratum 858921
  169. [ 0.739153] arch_timer: CPU5: Trapping CNTVCT access
  170. [ 0.739157] CPU5: Booted secondary processor 0x0000000101 [0x410fd091]
  171. [ 0.771163] Detected VIPT I-cache on CPU6
  172. [ 0.771169] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU6: 0x00000000101122
  173. [ 0.771179] arch_timer: Enabling local workaround for ARM erratum 858921
  174. [ 0.771183] arch_timer: CPU6: Trapping CNTVCT access
  175. [ 0.771188] CPU6: Booted secondary processor 0x0000000102 [0x410fd091]
  176. [ 0.803199] Detected VIPT I-cache on CPU7
  177. [ 0.803205] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU7: 0x00000000101122
  178. [ 0.803215] arch_timer: Enabling local workaround for ARM erratum 858921
  179. [ 0.803220] arch_timer: CPU7: Trapping CNTVCT access
  180. [ 0.803224] CPU7: Booted secondary processor 0x0000000103 [0x410fd091]
  181. [ 0.803281] smp: Brought up 1 node, 8 CPUs
  182. [ 0.990389] SMP: Total of 8 processors activated.
  183. [ 0.995146] CPU features: detected: 32-bit EL0 Support
  184. [ 1.000352] CPU features: detected: CRC32 instructions
  185. [ 1.006016] CPU: All CPU(s) started at EL2
  186. [ 1.010190] alternatives: patching kernel code
  187. [ 1.015916] devtmpfs: initialized
  188. [ 1.022093] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  189. [ 1.031983] futex hash table entries: 2048 (order: 5, 131072 bytes)
  190. [ 1.038914] pinctrl core: initialized pinctrl subsystem
  191. [ 1.044898] DMI not present or invalid.
  192. [ 1.049027] NET: Registered protocol family 16
  193. [ 1.053831] audit: initializing netlink subsys (disabled)
  194. [ 1.059374] audit: type=2000 audit(0.752:1): state=initialized audit_enabled=0 res=1
  195. [ 1.067220] cpuidle: using governor menu
  196. [ 1.071388] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  197. [ 1.083638] DMA: preallocated 256 KiB pool for atomic allocations
  198. [ 1.090436] Serial: AMBA PL011 UART driver
  199. [ 1.109767] hi3660-mbox e896b000.mailbox: Mailbox enabled
  200. [ 1.126289] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  201. [ 1.133092] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  202. [ 1.139872] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  203. [ 1.146645] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  204. [ 1.153723] cryptd: max_cpu_qlen set to 1000
  205. [ 1.158619] ACPI: Interpreter disabled.
  206. [ 1.163429] vgaarb: loaded
  207. [ 1.166299] SCSI subsystem initialized
  208. [ 1.170193] libata version 3.00 loaded.
  209. [ 1.174264] usbcore: registered new interface driver usbfs
  210. [ 1.179833] usbcore: registered new interface driver hub
  211. [ 1.185244] usbcore: registered new device driver usb
  212. [ 1.190686] pps_core: LinuxPPS API ver. 1 registered
  213. [ 1.195706] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  214. [ 1.204948] PTP clock support registered
  215. [ 1.208981] EDAC MC: Ver: 3.0.0
  216. [ 1.212383] Registered efivars operations
  217. [ 1.216837] Advanced Linux Sound Architecture Driver Initialized.
  218. [ 1.223556] clocksource: Switched to clocksource arch_sys_counter
  219. [ 1.487938] VFS: Disk quotas dquot_6.6.0
  220. [ 1.491954] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  221. [ 1.498929] *** VALIDATE hugetlbfs ***
  222. [ 1.502822] pnp: PnP ACPI: disabled
  223. [ 1.509382] NET: Registered protocol family 2
  224. [ 1.514171] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
  225. [ 1.522143] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  226. [ 1.529599] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  227. [ 1.536498] TCP: Hash tables configured (established 32768 bind 32768)
  228. [ 1.543157] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  229. [ 1.549278] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  230. [ 1.555903] NET: Registered protocol family 1
  231. [ 1.560558] RPC: Registered named UNIX socket transport module.
  232. [ 1.566546] RPC: Registered udp transport module.
  233. [ 1.571301] RPC: Registered tcp transport module.
  234. [ 1.576052] RPC: Registered tcp NFSv4.1 backchannel transport module.
  235. [ 1.582823] PCI: CLS 0 bytes, default 64
  236. [ 1.586879] Unpacking initramfs...
  237. [ 1.769643] Freeing initrd memory: 7164K
  238. [ 1.774415] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  239. [ 1.782989] hw perfevents: enabled with armv8_cortex_a73 PMU driver, 7 counters available
  240. [ 1.791415] kvm [1]: IPA Size Limit: 40bits
  241. [ 1.796184] kvm [1]: vgic interrupt IRQ1
  242. [ 1.800291] kvm [1]: Hyp mode initialized successfully
  243. [ 1.828972] Initialise system trusted keyrings
  244. [ 1.833574] workingset: timestamp_bits=44 max_order=20 bucket_order=0
  245. [ 1.843391] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  246. [ 1.849723] NFS: Registering the id_resolver key type
  247. [ 1.854852] Key type id_resolver registered
  248. [ 1.859078] Key type id_legacy registered
  249. [ 1.863167] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  250. [ 1.870056] 9p: Installing v9fs 9p2000 file system support
  251. [ 1.899100] Key type asymmetric registered
  252. [ 1.903350] Asymmetric key parser 'x509' registered
  253. [ 1.908334] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  254. [ 1.915862] io scheduler mq-deadline registered
  255. [ 1.920444] io scheduler kyber registered
  256. [ 1.926941] pinctrl-single e896c000.pinmux: 124 pins, size 496
  257. [ 1.932976] pinctrl-single ff37e000.pinmux: 6 pins, size 24
  258. [ 1.938772] pinctrl-single ff3b6000.pinmux: 12 pins, size 48
  259. [ 1.944561] pinctrl-single ff3fd000.pinmux: 6 pins, size 24
  260. [ 1.950304] pinctrl-single fff11000.pinmux: 42 pins, size 168
  261. [ 1.956262] pinctrl-single e896c800.pinmux: 128 pins, size 512
  262. [ 1.962224] pinctrl-single ff3b6800.pinmux: 6 pins, size 24
  263. [ 1.967924] pinctrl-single ff3fd800.pinmux: 6 pins, size 24
  264. [ 1.973638] pinctrl-single ff37e800.pinmux: 6 pins, size 24
  265. [ 1.979367] pinctrl-single fff11800.pinmux: 47 pins, size 188
  266. [ 1.986209] pl061_gpio e8a0b000.gpio: PL061 GPIO chip @0x00000000e8a0b000 registered
  267. [ 1.994155] pl061_gpio e8a0c000.gpio: PL061 GPIO chip @0x00000000e8a0c000 registered
  268. [ 2.002091] pl061_gpio e8a0d000.gpio: PL061 GPIO chip @0x00000000e8a0d000 registered
  269. [ 2.010024] pl061_gpio e8a0e000.gpio: PL061 GPIO chip @0x00000000e8a0e000 registered
  270. [ 2.017961] pl061_gpio e8a0f000.gpio: PL061 GPIO chip @0x00000000e8a0f000 registered
  271. [ 2.025897] pl061_gpio e8a10000.gpio: PL061 GPIO chip @0x00000000e8a10000 registered
  272. [ 2.033832] pl061_gpio e8a11000.gpio: PL061 GPIO chip @0x00000000e8a11000 registered
  273. [ 2.041770] pl061_gpio e8a12000.gpio: PL061 GPIO chip @0x00000000e8a12000 registered
  274. [ 2.049702] pl061_gpio e8a13000.gpio: PL061 GPIO chip @0x00000000e8a13000 registered
  275. [ 2.057639] pl061_gpio e8a14000.gpio: PL061 GPIO chip @0x00000000e8a14000 registered
  276. [ 2.065570] pl061_gpio e8a15000.gpio: PL061 GPIO chip @0x00000000e8a15000 registered
  277. [ 2.073508] pl061_gpio e8a16000.gpio: PL061 GPIO chip @0x00000000e8a16000 registered
  278. [ 2.081441] pl061_gpio e8a17000.gpio: PL061 GPIO chip @0x00000000e8a17000 registered
  279. [ 2.089375] pl061_gpio e8a18000.gpio: PL061 GPIO chip @0x00000000e8a18000 registered
  280. [ 2.097308] pl061_gpio e8a19000.gpio: PL061 GPIO chip @0x00000000e8a19000 registered
  281. [ 2.105239] pl061_gpio e8a1a000.gpio: PL061 GPIO chip @0x00000000e8a1a000 registered
  282. [ 2.113165] pl061_gpio e8a1b000.gpio: PL061 GPIO chip @0x00000000e8a1b000 registered
  283. [ 2.121095] pl061_gpio e8a1c000.gpio: PL061 GPIO chip @0x00000000e8a1c000 registered
  284. [ 2.129052] pl061_gpio ff3b4000.gpio: PL061 GPIO chip @0x00000000ff3b4000 registered
  285. [ 2.137003] pl061_gpio ff3b5000.gpio: PL061 GPIO chip @0x00000000ff3b5000 registered
  286. [ 2.144938] pl061_gpio e8a1f000.gpio: PL061 GPIO chip @0x00000000e8a1f000 registered
  287. [ 2.152878] pl061_gpio e8a20000.gpio: PL061 GPIO chip @0x00000000e8a20000 registered
  288. [ 2.160817] pl061_gpio fff0b000.gpio: PL061 GPIO chip @0x00000000fff0b000 registered
  289. [ 2.168752] pl061_gpio fff0c000.gpio: PL061 GPIO chip @0x00000000fff0c000 registered
  290. [ 2.176688] pl061_gpio fff0d000.gpio: PL061 GPIO chip @0x00000000fff0d000 registered
  291. [ 2.184624] pl061_gpio fff0e000.gpio: PL061 GPIO chip @0x00000000fff0e000 registered
  292. [ 2.192567] pl061_gpio fff0f000.gpio: PL061 GPIO chip @0x00000000fff0f000 registered
  293. [ 2.200505] pl061_gpio fff10000.gpio: PL061 GPIO chip @0x00000000fff10000 registered
  294. [ 2.208440] pl061_gpio fff1d000.gpio: PL061 GPIO chip @0x00000000fff1d000 registered
  295. [ 2.255140] kirin-pcie f4000000.pcie: host bridge /soc/pcie@f4000000 ranges:
  296. [ 2.262280] kirin-pcie f4000000.pcie: MEM 0xf6000000..0xf7ffffff -> 0x00000000
  297. [ 3.273873] kirin-pcie f4000000.pcie: Link Fail
  298. [ 3.278542] kirin-pcie f4000000.pcie: PCI host bridge to bus 0000:00
  299. [ 3.284972] pci_bus 0000:00: root bus resource [bus 00-01]
  300. [ 3.290519] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf7ffffff] (bus address [0x00000000-0x01ffffff])
  301. [ 3.300836] pci 0000:00:00.0: [19e5:3660] type 01 class 0x060400
  302. [ 3.306951] pci 0000:00:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
  303. [ 3.313927] pci 0000:00:00.0: supports D1 D2
  304. [ 3.318242] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
  305. [ 3.325429] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-01] (conflicts with (null) [bus 00-01])
  306. [ 3.337214] pci 0000:00:00.0: BAR 0: assigned [mem 0xf6000000-0xf6ffffff 64bit]
  307. [ 3.344619] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  308. [ 3.350127] pcieport 0000:00:00.0: Signaling PME with IRQ 65
  309. [ 3.355997] aer 0000:00:00.0:pcie002: AER enabled with IRQ 65
  310. [ 3.362466] EINJ: ACPI disabled.
  311. [ 3.367363] k3-dma fdf30000.dma: dma-channel-mask doesn't exist, considering all as available.
  312. [ 3.376869] k3-dma fdf30000.dma: initialized
  313. [ 3.384525] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  314. [ 3.392047] SuperH (H)SCI(F) driver initialized
  315. [ 3.396880] msm_serial: driver initialized
  316. [ 3.405887] loop: module loaded
  317. [ 3.410759] ufshcd-hisi ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
  318. [ 3.421507] ufshcd-hisi ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
  319. [ 3.431886] ufshcd-hisi ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
  320. [ 3.442351] ufshcd-hisi ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
  321. [ 3.480568] scsi host0: ufshcd
  322. [ 3.497397] libphy: Fixed MDIO Bus: probed
  323. [ 3.501765] tun: Universal TUN/TAP device driver, 1.6
  324. [ 3.507259] thunder_xcv, ver 1.0
  325. [ 3.510546] thunder_bgx, ver 1.0
  326. [ 3.513827] nicpf, ver 1.0
  327. [ 3.516844] hclge is initializing
  328. [ 3.520194] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
  329. [ 3.527494] hns3: Copyright (c) 2017 Huawei Corporation.
  330. [ 3.532895] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  331. [ 3.538791] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  332. [ 3.544800] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
  333. [ 3.551836] igb: Copyright (c) 2007-2014 Intel Corporation.
  334. [ 3.557487] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  335. [ 3.565403] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  336. [ 3.571554] sky2: driver version 1.30
  337. [ 3.575574] usbcore: registered new interface driver asix
  338. [ 3.581062] usbcore: registered new interface driver ax88179_178a
  339. [ 3.587236] usbcore: registered new interface driver cdc_ether
  340. [ 3.593146] usbcore: registered new interface driver dm9601
  341. [ 3.597173] ufshcd-hisi ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
  342. [ 3.598791] usbcore: registered new interface driver net1080
  343. [ 3.617090] usbcore: registered new interface driver cdc_subset
  344. [ 3.623086] usbcore: registered new interface driver zaurus
  345. [ 3.628741] usbcore: registered new interface driver cdc_ncm
  346. [ 3.634540] VFIO - User Level meta-driver version: 0.3
  347. [ 3.640379] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  348. [ 3.646982] ehci-pci: EHCI PCI platform driver
  349. [ 3.651495] ehci-platform: EHCI generic platform driver
  350. [ 3.656833] ehci-orion: EHCI orion driver
  351. [ 3.660928] ehci-exynos: EHCI EXYNOS driver
  352. [ 3.665195] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  353. [ 3.671450] ohci-pci: OHCI PCI platform driver
  354. [ 3.675961] ohci-platform: OHCI generic platform driver
  355. [ 3.681288] ohci-exynos: OHCI EXYNOS driver
  356. [ 3.685747] usbcore: registered new interface driver usb-storage
  357. [ 3.693122] rtc-pl031 fff04000.rtc: registered as rtc0
  358. [ 3.698631] i2c /dev entries driver
  359. [ 3.704372] sp805-wdt e8a06000.watchdog: registration successful
  360. [ 3.709238] ufs final power mode: gear = 3, lane = 2, pwr = 1, rate = 2
  361. [ 3.710566] sp805-wdt e8a07000.watchdog: registration successful
  362. [ 3.719420] ufshcd-hisi ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
  363. [ 3.735465] sdhci: Secure Digital Host Controller Interface driver
  364. [ 3.736381] ufshcd-hisi ff3b0000.ufs: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
  365. [ 3.741919] sdhci: Copyright(c) Pierre Ossman
  366. [ 3.755253] scsi 0:0:0:49488: Well-known LUN TOSHIBA THGBF7G8K4LBATRC 0100 PQ: 0 ANSI: 6
  367. [ 3.757656] Synopsys Designware Multimedia Card Interface Driver
  368. [ 3.769114] scsi 0:0:0:49476: Well-known LUN TOSHIBA THGBF7G8K4LBATRC 0100 PQ: 0 ANSI: 6
  369. [ 3.772543] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
  370. [ 3.784076] scsi 0:0:0:49456: Well-known LUN TOSHIBA THGBF7G8K4LBATRC 0100 PQ: 0 ANSI: 6
  371. [ 3.792971] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
  372. [ 3.802873] scsi 0:0:0:0: Direct-Access TOSHIBA THGBF7G8K4LBATRC 0100 PQ: 0 ANSI: 6
  373. [ 3.814694] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
  374. [ 3.817444] sd 0:0:0:0: Power-on or device reset occurred
  375. [ 3.818136] scsi 0:0:0:1: Direct-Access TOSHIBA THGBF7G8K4LBATRC 0100 PQ: 0 ANSI: 6
  376. [ 3.820383] scsi 0:0:0:2: Direct-Access TOSHIBA THGBF7G8K4LBATRC 0100 PQ: 0 ANSI: 6
  377. [ 3.821123] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
  378. [ 3.822454] scsi 0:0:0:3: Direct-Access TOSHIBA THGBF7G8K4LBATRC 0100 PQ: 0 ANSI: 6
  379. [ 3.824148] sd 0:0:0:1: Power-on or device reset occurred
  380. [ 3.826801] sd 0:0:0:2: Power-on or device reset occurred
  381. [ 3.828134] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
  382. [ 3.828468] sd 0:0:0:0: [sda] Write Protect is off
  383. [ 3.828471] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
  384. [ 3.828935] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  385. [ 3.829079] sd 0:0:0:0: [sda] Optimal transfer size 65536 bytes
  386. [ 3.834770] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 59,32 bit host data width,256 deep fifo
  387. [ 3.842953] sd 0:0:0:3: Power-on or device reset occurred
  388. [ 3.846354] random: fast init done
  389. [ 3.847454] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
  390. [ 3.848380] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
  391. [ 3.849371] sd 0:0:0:2: [sdc] Write Protect is off
  392. [ 3.849372] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
  393. [ 3.849602] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
  394. [ 3.851091] sd 0:0:0:0: [sda] Attached SCSI disk
  395. [ 3.851207] sd 0:0:0:2: [sdc] Optimal transfer size 65536 bytes
  396. [ 3.855811] sd 0:0:0:2: [sdc] Attached SCSI disk
  397. [ 3.856482] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
  398. [ 3.857550] sd 0:0:0:3: [sdd] 7805952 4096-byte logical blocks: (32.0 GB/29.8 GiB)
  399. [ 3.857671] sd 0:0:0:3: [sdd] Write Protect is off
  400. [ 3.857673] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
  401. [ 3.857910] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
  402. [ 3.858054] sd 0:0:0:3: [sdd] Optimal transfer size 65536 bytes
  403. [ 3.860544] Alternate GPT is invalid, using primary GPT.
  404. [ 3.860555] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12
  405. [ 3.863157] sd 0:0:0:3: [sdd] Attached SCSI disk
  406. [ 3.867516] sd 0:0:0:1: [sdb] Write Protect is off
  407. [ 3.876795] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  408. [ 3.879621] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
  409. [ 3.880998] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
  410. [ 3.896857] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
  411. [ 3.900796] sd 0:0:0:1: [sdb] Optimal transfer size 65536 bytes
  412. [ 3.910862] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
  413. [ 3.922496] sd 0:0:0:1: [sdb] Attached SCSI disk
  414. [ 4.076386] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
  415. [ 4.082813] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
  416. [ 4.088196] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 60,32 bit host data width,256 deep fifo
  417. [ 4.097909] sdhci-pltfm: SDHCI platform and OF driver helper
  418. [ 4.105927] ledtrig-cpu: registered to indicate activity on CPUs
  419. [ 4.112392] usbcore: registered new interface driver usbhid
  420. [ 4.118046] usbhid: USB HID core driver
  421. [ 4.122565] optee: probing for conduit method from DT.
  422. [ 4.127765] optee: revision 3.7 (479c49dd)
  423. [ 4.128215] optee: dynamic shared memory is enabled
  424. [ 4.137441] optee: initialized driver
  425. [ 4.141750] NET: Registered protocol family 17
  426. [ 4.146310] 9pnet: Installing 9P2000 support
  427. [ 4.150649] Key type dns_resolver registered
  428. [ 4.155821] registered taskstats version 1
  429. [ 4.159959] Loading compiled-in X.509 certificates
  430. [ 4.167761] ffd74000.serial: ttyAMA3 at MMIO 0xffd74000 (irq = 21, base_baud = 0) is a PL011 rev2
  431. [ 4.177180] fdf01000.serial: ttyAMA4 at MMIO 0xfdf01000 (irq = 22, base_baud = 0) is a PL011 rev2
  432. [ 4.186199] serial serial0: tty port ttyAMA4 registered
  433. [ 4.191559] fff32000.serial: ttyAMA6 at MMIO 0xfff32000 (irq = 23, base_baud = 0) is a PL011 rev2
  434. [ 4.200536] printk: console [ttyAMA6] enabled
  435. [ 4.200536] printk: console [ttyAMA6] enabled
  436. [ 4.209289] printk: bootconsole [pl11] disabled
  437. [ 4.209289] printk: bootconsole [pl11] disabled
  438. [ 4.219108] ssp-pl022 ffd68000.spi: ARM PL022 driver, device ID: 0x00041022
  439. [ 4.226110] ssp-pl022 ffd68000.spi: mapped registers from 0x00000000ffd68000 to (____ptrval____)
  440. [ 4.234929] ssp-pl022 ffd68000.spi: setup for DMA on RX dma0chan0, TX dma0chan1
  441. [ 4.242744] ssp-pl022 ff3b3000.spi: ARM PL022 driver, device ID: 0x00041022
  442. [ 4.249724] ssp-pl022 ff3b3000.spi: mapped registers from 0x00000000ff3b3000 to (____ptrval____)
  443. [ 4.258522] ssp-pl022 ff3b3000.spi: setup for DMA on RX dma0chan2, TX dma0chan3
  444. [ 4.267940] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
  445. [ 4.279565] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
  446. [ 4.286829] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
  447. [ 4.293189] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
  448. [ 4.298503] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 60,32 bit host data width,128 deep fifo
  449. [ 4.307870] mmc_host mmc1: card is non-removable.
  450. [ 4.409977] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  451. [ 4.434812] input: keys as /devices/platform/keys/input/input0
  452. [ 4.441407] rtc-pl031 fff04000.rtc: setting system clock to 1970-01-01T00:00:38 UTC (38)
  453. [ 4.449627] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  454. [ 4.462763] dwmmc_k3 ff3ff000.dwmmc2: card claims to support voltages below defined range
  455. [ 4.462825] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  456. [ 4.478800] ALSA device list:
  457. [ 4.481766] No soundcards found.
  458. [ 4.482844] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
  459. [ 4.495230] uart-pl011 fff32000.serial: no DMA platform data
  460. [ 4.496613] mmc1: new SDIO card at address 0001
  461. [ 4.506205] wl18xx_driver wl18xx.0.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
  462. [ 4.507341] Freeing unused kernel memory: 2176K
  463. [ 4.516916] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2
  464. [ 4.530222] wlcore: WARNING falling back to default config
  465. [ 4.547995] Run /init as init process
  466. Starting syslogd: OK
  467. Starting klogd: OK
  468. Initializing random number generator... [ 4.570878] random: dd: uninitialized urandom read (512 bytes read)
  469. done.
  470. Set permissions on /dev/tee*: OK
  471. Set permissions on /dev/ion: OK
  472. Create/set permissions on /data/tee: OK
  473. Starting tee-supplicant: OK
  474. Starting network: OK
  475. [ 4.654237] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  476.  
  477. Welcome to Buildroot, type root or test to login
  478. buildroot login: [ 4.719569] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
  479. [ 4.830071] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  480. [ 4.942630] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
  481. [ 5.186767] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
  482. [ 5.198823] wlcore: WARNING Detected unconfigured mac address in nvs, derive from fuse instead.
  483. [ 5.207525] wlcore: WARNING This default nvs file can be removed from the file system
  484. [ 5.216172] wlcore: loaded
  485.  
  486. Welcome to Buildroot, type root or test to login
  487. buildroot login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!