SHARE
TWEET

ubuntu_streak7

giveen Feb 26th, 2013 129 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. --------- beginning of /dev/alog/main
  2.  
  3. D/PrintK  (    0): <6>Initializing cgroup subsys cpu
  4.  
  5. I/PrintK  (    0): <5>Linux version 2.6.36.3-g19e9bf5-dirty (giveen@giveen-MS-7641) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #3 SMP PREEMPT Tue Feb 26 12:45:30 MST 2013
  6.  
  7. W/PrintK  (    0): CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c53c7f
  8.  
  9. W/PrintK  (    0): CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  10.  
  11. W/PrintK  (    0): Machine: Streak7
  12.  
  13. W/PrintK  (    0): <4>Ignoring unrecognised tag 0x54410009
  14.  
  15. D/PrintK  (    0): <6>Tegra reserved memory:
  16.  
  17. D/PrintK  (    0): LP0:                    1fa5f000 - 1fa60fff
  18.  
  19. D/PrintK  (    0): Bootloader framebuffer: 00000000 - ffffffff
  20.  
  21. D/PrintK  (    0): Framebuffer:            17800000 - 179fffff
  22.  
  23. D/PrintK  (    0): 2nd Framebuffer:         17a00000 - 17bfffff
  24.  
  25. D/PrintK  (    0): Carveout:               17c00000 - 1fbfffff
  26.  
  27. W/PrintK  (    0): Memory policy: ECC disabled, Data cache writealloc
  28.  
  29. V/PrintK  (    0): <7>On node 0 totalpages: 96256
  30.  
  31. V/PrintK  (    0): <7>free_area_init_node: node 0, pgdat c0695de0, node_mem_map c08ba000
  32.  
  33. V/PrintK  (    0): <7>  Normal zone: 776 pages used for memmap
  34.  
  35. V/PrintK  (    0): <7>  Normal zone: 0 pages reserved
  36.  
  37. V/PrintK  (    0): <7>  Normal zone: 95480 pages, LIFO batch:31
  38.  
  39. W/PrintK  (    0): <4>  HighMem zone: 240 pages exceeds realsize 0
  40.  
  41. D/PrintK  (    0): <6>PERCPU: Embedded 7 pages/cpu @c0cb7000 s7264 r8192 d13216 u65536
  42.  
  43. D/PrintK  (    0): <6>pcpu-alloc: s7264 r8192 d13216 u65536 alloc=16*4096
  44.  
  45. V/PrintK  (    0):
  46.  
  47. D/PrintK  (    0): <6>pcpu-alloc:
  48.  
  49. V/PrintK  (    0): [0]
  50.  
  51. V/PrintK  (    0): 0
  52.  
  53. V/PrintK  (    0): [0]
  54.  
  55. V/PrintK  (    0): 1
  56.  
  57. V/PrintK  (    0):
  58.  
  59. W/PrintK  (    0): Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 95480
  60.  
  61. I/PrintK  (    0): <5>Kernel command line: nvmem=64M@444M mem=508M@0M vmalloc=508M video=tegrafb usbcore.old_scheme_first=1 lp0_vec=8192@0x1fa5f000 tegraboot=sdmmc board_info=0:0:0:0:0 OemBoardId=EVT3-1 -b androidboot.bootloader=EVT3-1-b mbr_offset_lba=32768 console=none androidboot.serialno=027c100941c0a4d7 rf_test=0
  62.  
  63. D/PrintK  (    0): <6>board info: Id:0 0 SKU:0 Fab:0 Rev:
  64.  
  65. W/PrintK  (    0): <4>force_mbr_offset_lba_fn: force_mbr_offset_lba=32768
  66.  
  67. D/PrintK  (    0): <6>PID hash table entries: 2048 (order: 1, 8192 bytes)
  68.  
  69. D/PrintK  (    0): <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  70.  
  71. D/PrintK  (    0): <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  72.  
  73. D/PrintK  (    0): <6>Memory:
  74.  
  75. V/PrintK  (    0):  376MB
  76.  
  77. V/PrintK  (    0):  = 376MB total
  78.  
  79. I/PrintK  (    0): <5>Memory: 371320k/371320k available, 148872k reserved, 0K highmem
  80.  
  81. I/PrintK  (    0): <5>Virtual kernel memory layout:
  82.  
  83. I/PrintK  (    0):     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  84.  
  85. I/PrintK  (    0):     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  86.  
  87. I/PrintK  (    0):     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
  88.  
  89. I/PrintK  (    0):     vmalloc : 0xd8800000 - 0xf8000000   ( 504 MB)
  90.  
  91. I/PrintK  (    0):     lowmem  : 0xc0000000 - 0xd8400000   ( 388 MB)
  92.  
  93. I/PrintK  (    0):     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  94.  
  95. I/PrintK  (    0):     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  96.  
  97. I/PrintK  (    0):       .init : 0xc0008000 - 0xc0037000   ( 188 kB)
  98.  
  99. I/PrintK  (    0):       .text : 0xc0037000 - 0xc060f000   (5984 kB)
  100.  
  101. I/PrintK  (    0):       .data : 0xc0638000 - 0xc06968a0   ( 379 kB)
  102.  
  103. D/PrintK  (    0): <6>Hierarchical RCU implementation.
  104.  
  105. D/PrintK  (    0): <6>  RCU dyntick-idle grace-period acceleration is enabled.
  106.  
  107. D/PrintK  (    0): <6>  RCU-based detection of stalled CPUs is disabled.
  108.  
  109. D/PrintK  (    0): <6>  Verbose stalled-CPUs detection is disabled.
  110.  
  111. D/PrintK  (    0): <6>NR_IRQS:448
  112.  
  113. D/PrintK  (    0): <6>Calibrating delay loop...
  114.  
  115. V/PrintK  (    0): <c>598.01 BogoMIPS (lpj=2990080)
  116.  
  117. D/PrintK  (    0): <6>pid_max: default: 32768 minimum: 301
  118.  
  119. W/PrintK  (    0): Mount-cache hash table entries: 512
  120.  
  121. D/PrintK  (    0): <6>Initializing cgroup subsys debug
  122.  
  123. D/PrintK  (    0): <6>Initializing cgroup subsys cpuacct
  124.  
  125. D/PrintK  (    0): <6>Initializing cgroup subsys freezer
  126.  
  127. D/PrintK  (    0): <6>Initializing cgroup subsys bfqio
  128.  
  129. D/PrintK  (    0): <6>CPU: Testing write buffer coherency:
  130.  
  131. V/PrintK  (    0): ok
  132.  
  133. D/PrintK  (    1): <6>Calibrating local timer...
  134.  
  135. V/PrintK  (    1): 74.94MHz, setting to
  136.  
  137. V/PrintK  (    1): 2.50MHz.
  138.  
  139. W/PrintK  (    0): CPU1: Booted secondary processor
  140.  
  141. D/PrintK  (    1): <6>Brought up 2 CPUs
  142.  
  143. D/PrintK  (    1): <6>SMP: Total of 2 processors activated (1196.03 BogoMIPS).
  144.  
  145. D/PrintK  (    1): <6>regulator: core version 0.5
  146.  
  147. D/PrintK  (    1): <6>regulator: dummy:
  148.  
  149. D/PrintK  (    1): <6>NET: Registered protocol family 16
  150.  
  151. D/PrintK  (    1): <6>host1x bus init
  152.  
  153. D/PrintK  (    1): <6>Tegra SKU: 8 Rev: A03 CPU Process: 1 Core Process: 2 Speedo ID: 1
  154.  
  155. D/PrintK  (    1): <6>Tegra Revision: A03 prime SKU: 0x8 CPU Process: 1 Core Process: 2
  156.  
  157. E/PrintK  (    1): <3>tegra2_init_sku_limits: Unknown sku clock avp.sclk
  158.  
  159. E/PrintK  (    1): <3>tegra2_init_sku_limits: Unknown sku clock bsea.sclk
  160.  
  161. W/PrintK  (    1): Entry WLAN ALLOC STATIC MEM
  162.  
  163. F/PrintK  (    1): <2>dhd_port=0xd7084000,bus_rxbuf=0xd7088000,bus_databuf=0xd7090000
  164.  
  165. W/PrintK  (    1): ventana_touch_init_atmel 853
  166.  
  167. W/PrintK  (    1): ventana_capkey_init 885
  168.  
  169. W/PrintK  (    1): tegra_keypad_init 730
  170.  
  171. D/PrintK  (    1): <6>ventana_datacards_init()
  172.  
  173. D/PrintK  (    1): <6>tegra_arb_init: initialized
  174.  
  175. D/PrintK  (    1): <6>tegra_iovmm_register: added iovmm-gart
  176.  
  177. W/PrintK  (    1): bio: create slab <bio-0> at 0
  178.  
  179. I/PrintK  (    1): <5>SCSI subsystem initialized
  180.  
  181. D/PrintK  (    1): <6>tegra-otg tegra-otg: d7029ee0
  182.  
  183. D/PrintK  (    1): <6>usbcore: registered new interface driver usbfs
  184.  
  185. D/PrintK  (    1): <6>usbcore: registered new interface driver hub
  186.  
  187. D/PrintK  (    1): <6>usbcore: registered new device driver usb
  188.  
  189. D/PrintK  (    1): <6>[I2C]tegra_i2c_probe+, id=0, nr=0
  190.  
  191. D/PrintK  (    1): <6>[I2C]tegra_i2c_probe-
  192.  
  193. D/PrintK  (    1): <6>[I2C]tegra_i2c_probe+, id=1, nr=1
  194.  
  195. D/PrintK  (    1): <6>[I2C]tegra_i2c_probe-
  196.  
  197. D/PrintK  (    1): <6>[I2C]tegra_i2c_probe+, id=2, nr=3
  198.  
  199. D/PrintK  (    1): <6>[I2C]tegra_i2c_probe-
  200.  
  201. D/PrintK  (    1): <6>[I2C]tegra_i2c_probe+, id=3, nr=4
  202.  
  203. D/PrintK  (    1): <6>tps6586x 4-0034: d7029d80
  204.  
  205. D/PrintK  (    1): <6>[PMU]tps6586x_regulator_enable, REG-SM_0
  206.  
  207. D/PrintK  (    1): <6>regulator: REG-SM_0: 725 <--> 1500 mV at 1275 mV normal standby
  208.  
  209. D/PrintK  (    1): <6>[PMU]tps6586x_regulator_enable, REG-SM_1
  210.  
  211. D/PrintK  (    1): <6>regulator: REG-SM_1: 725 <--> 1500 mV at 750 mV normal standby
  212.  
  213. D/PrintK  (    1): <6>[PMU]tps6586x_ldo_set_voltage,  REG-LDO_0 2850~2850
  214.  
  215. D/PrintK  (    1): <6>[PMU]tps6586x_regulator_enable, REG-LDO_0
  216.  
  217. D/PrintK  (    1): <6>regulator: REG-LDO_0: 2850 mV normal standby
  218.  
  219. D/PrintK  (    1): <6>[PMU]tps6586x_ldo_set_voltage,  REG-LDO_1 1100~1100
  220.  
  221. D/PrintK  (    1): <6>[PMU]tps6586x_regulator_enable, REG-LDO_1
  222.  
  223. D/PrintK  (    1): <6>regulator: REG-LDO_1: 1100 mV normal standby
  224.  
  225. D/PrintK  (    1): <6>regulator: REG-LDO_2: 725 <--> 1500 mV at 1275 mV normal standby
  226.  
  227. D/PrintK  (    1): <6>regulator: REG-LDO_3: 1250 <--> 3300 mV at 2850 mV normal standby
  228.  
  229. D/PrintK  (    1): <6>[PMU]tps6586x_regulator_enable, REG-LDO_4
  230.  
  231. D/PrintK  (    1): <6>regulator: REG-LDO_4: 1800 mV normal standby
  232.  
  233. D/PrintK  (    1): <6>[PMU]tps6586x_regulator_enable, REG-LDO_5
  234.  
  235. D/PrintK  (    1): <6>regulator: REG-LDO_5: 2850 mV normal standby
  236.  
  237. D/PrintK  (    1): <6>[PMU]tps6586x_regulator_enable, REG-LDO_6
  238.  
  239. D/PrintK  (    1): <6>regulator: REG-LDO_6: 2850 mV normal standby
  240.  
  241. D/PrintK  (    1): <6>regulator: REG-LDO_7: 3300 mV normal standby
  242.  
  243. D/PrintK  (    1): <6>regulator: REG-LDO_8: 1800 mV normal standby
  244.  
  245. D/PrintK  (    1): <6>[PMU]tps6586x_ldo_set_voltage,  REG-LDO_9 2850~2850
  246.  
  247. D/PrintK  (    1): <6>[PMU]tps6586x_regulator_enable, REG-LDO_9
  248.  
  249. D/PrintK  (    1): <6>regulator: REG-LDO_9: 2850 mV normal standby
  250.  
  251. D/PrintK  (    1): <6>regulator: REG-GPIO_1: 1500 mV normal standby
  252.  
  253. D/PrintK  (    1): <6>[PMU]tps6586x_regulator_preinit, 3V3_CAPCHG request Pass
  254.  
  255. D/PrintK  (    1): <6>[PMU]tps6586x_regulator_preinit, 3V3_CAPCHG output 0, Pass
  256.  
  257. D/PrintK  (    1): <6>regulator: REG-GPIO_2: 3300 mV normal standby
  258.  
  259. D/PrintK  (    1): <6>regulator: REG-GPIO_3: 5000 mV normal standby
  260.  
  261. D/PrintK  (    1): <6>regulator: REG-GPIO_4: 1200 mV normal standby
  262.  
  263. D/PrintK  (    1): <6>regulator: REG-LED_PWM: 5000 mV normal standby
  264.  
  265. D/PrintK  (    1): <6>[I2C]tegra_i2c_probe-
  266.  
  267. D/PrintK  (    1): <6>Advanced Linux Sound Architecture Driver Version 1.0.23.
  268.  
  269. D/PrintK  (    1): <6>Bluetooth: Core ver 2.15
  270.  
  271. D/PrintK  (    1): <6>NET: Registered protocol family 31
  272.  
  273. D/PrintK  (    1): <6>Bluetooth: HCI device and connection manager initialized
  274.  
  275. D/PrintK  (    1): <6>Bluetooth: HCI socket layer initialized
  276.  
  277. D/PrintK  (    1): <6>NET: Registered protocol family 8
  278.  
  279. D/PrintK  (    1): <6>NET: Registered protocol family 20
  280.  
  281. D/PrintK  (    1): <6>Switching to clocksource timer_us
  282.  
  283. D/PrintK  (    1): <6>tegra-nvmap tegra-nvmap: d7029eb0
  284.  
  285. D/PrintK  (    1): <6>tegra-nvmap tegra-nvmap: d7029eb0
  286.  
  287. D/PrintK  (    1): <6>NET: Registered protocol family 2
  288.  
  289. D/PrintK  (    1): <6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  290.  
  291. D/PrintK  (    1): <6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  292.  
  293. D/PrintK  (    1): <6>TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
  294.  
  295. D/PrintK  (    1): <6>TCP: Hash tables configured (established 16384 bind 16384)
  296.  
  297. D/PrintK  (    1): <6>TCP reno registered
  298.  
  299. D/PrintK  (    1): <6>UDP hash table entries: 256 (order: 1, 8192 bytes)
  300.  
  301. D/PrintK  (    1): <6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  302.  
  303. D/PrintK  (    1): <6>NET: Registered protocol family 1
  304.  
  305. D/PrintK  (    1): <6>Unpacking initramfs...
  306.  
  307. D/PrintK  (    1): <6>Freeing initrd memory: 220K
  308.  
  309. D/PrintK  (    1): <6>PMU: registered new PMU device of type 0
  310.  
  311. D/PrintK  (    1): <6>BootLog, +ftm_init
  312.  
  313. D/PrintK  (    1): <6>ftm_init platform_driver_register ret: 0
  314.  
  315. D/PrintK  (    1): <6>ftm_init sysdev_class_register ret: 0
  316.  
  317. D/PrintK  (    1): <6>ftm_init sysdev_register ret: 0
  318.  
  319. D/PrintK  (    1): <6>ftm_init sysdev_create_file ret: 0
  320.  
  321. D/PrintK  (    1): <6>BootLog, -ftm_init, ret=0
  322.  
  323. D/PrintK  (    1): <6>ashmem: initialized
  324.  
  325. I/PrintK  (    1): <5>VFS: Disk quotas dquot_6.5.2
  326.  
  327. W/PrintK  (    1): Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  328.  
  329. D/PrintK  (    1): <6>NTFS driver 2.1.29 [Flags: R/W].
  330.  
  331. D/PrintK  (    1): <6>fuse init (API version 7.15)
  332.  
  333. D/PrintK  (    1): <6>io scheduler noop registered
  334.  
  335. D/PrintK  (    1): <6>io scheduler deadline registered
  336.  
  337. D/PrintK  (    1): <6>io scheduler cfq registered
  338.  
  339. D/PrintK  (    1): <6>io scheduler sio registered (default)
  340.  
  341. D/PrintK  (    1): <6>io scheduler bfq registered
  342.  
  343. D/PrintK  (    1): <6>io scheduler vr registered
  344.  
  345. W/PrintK  (    1): [BKL]Backlight ON  (10588)
  346.  
  347. D/PrintK  (    1): <6>tegra_grhost tegra_grhost: d7029eb8
  348.  
  349. D/PrintK  (    1): <6>tegradc tegradc.0: d7029ec0
  350.  
  351. D/PrintK  (    1): <6>tegradc tegradc.0: d7029e88
  352.  
  353. D/PrintK  (    1): <6>tegradc tegradc.1: d7029ec0
  354.  
  355. D/PrintK  (    1): <6>tegradc tegradc.1: d7029e88
  356.  
  357. D/PrintK  (    1): <6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  358.  
  359. D/PrintK  (    1): <6>tegra_uart.2: ttyHS2 at I/O 0x0 (irq = 78) is a unknown
  360.  
  361. D/PrintK  (    1): <6>Registered UART port ttyHS2
  362.  
  363. D/PrintK  (    1): <6>tegra_uart.3: ttyHS3 at I/O 0x0 (irq = 122) is a unknown
  364.  
  365. D/PrintK  (    1): <6>Registered UART port ttyHS3
  366.  
  367. D/PrintK  (    1): <6>Initialized tegra uart driver
  368.  
  369. D/PrintK  (    1): <6>loop: module loaded
  370.  
  371. W/PrintK  (    1): BootLog, +sensors_daemon_init+
  372.  
  373. D/PrintK  (    1): <6>input: sensors_daemon as /devices/virtual/input/input0
  374.  
  375. W/PrintK  (    1): BootLog, -sensors_daemon_init-, ret=0
  376.  
  377. W/PrintK  (    1): BootLog, +current_driving_init+
  378.  
  379. W/PrintK  (    1): BootLog, -current_driving_init-, ret=0
  380.  
  381. D/PrintK  (    1): <6>nct1008 3-004c: d7029eb8
  382.  
  383. D/PrintK  (    1): <6>bonding: Ethernet Channel Bonding Driver: v3.7.0 (June 2, 2010)
  384.  
  385. W/PrintK  (    1): <4>bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
  386.  
  387. D/PrintK  (    1): <6>PPP generic driver version 2.4.2
  388.  
  389. D/PrintK  (    1): <6>PPP Deflate Compression module registered
  390.  
  391. D/PrintK  (    1): <6>PPP BSD Compression module registered
  392.  
  393. D/PrintK  (    1): <6>PPP MPPE Compression module registered
  394.  
  395. D/PrintK  (    1): <6>NET: Registered protocol family 24
  396.  
  397. D/PrintK  (    1): <6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
  398.  
  399. D/PrintK  (    1): <6>CSLIP: code copyright 1989 Regents of the University of California.
  400.  
  401. D/PrintK  (    1): <6>SLIP linefill/keepalive option.
  402.  
  403. D/PrintK  (    1): <6>tun: Universal TUN/TAP device driver, 1.6
  404.  
  405. D/PrintK  (    1): <6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  406.  
  407. D/PrintK  (    1): <6>usbcore: registered new interface driver asix
  408.  
  409. D/PrintK  (    1): <6>usbcore: registered new interface driver cdc_ether
  410.  
  411. D/PrintK  (    1): <6>usbcore: registered new interface driver CDC NCM device
  412.  
  413. D/PrintK  (    1): <6>usbcore: registered new interface driver cdc_subset
  414.  
  415. D/PrintK  (    1): <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  416.  
  417. V/PrintK  (    1): <7>ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
  418.  
  419. D/PrintK  (    1): <6>tegra-ehci tegra-ehci.2: d7029e90
  420.  
  421. V/PrintK  (    1): <7>/home/giveen/ubuntu_tablet/kernel/dell/streak7/drivers/usb/core/inode.c: creating file 'devices'
  422.  
  423. V/PrintK  (    1): <7>/home/giveen/ubuntu_tablet/kernel/dell/streak7/drivers/usb/core/inode.c: creating file '001'
  424.  
  425. D/PrintK  (    1): <6>tegra-ehci tegra-ehci.2: d7029e90
  426.  
  427. V/PrintK  (    1): <7>tegra-ehci tegra-ehci.2: d7029e10
  428.  
  429. V/PrintK  (    1): <7>tegra-ehci tegra-ehci.2: d7029e10
  430.  
  431. V/PrintK  (    1): <7>tegra-ehci tegra-ehci.2: d7029da8
  432.  
  433. V/PrintK  (    1): <7>tegra-ehci tegra-ehci.2: d7029e10
  434.  
  435. V/PrintK  (    1): <7>tegra-ehci tegra-ehci.2: d7029e10
  436.  
  437. D/PrintK  (    1): <6>tegra-ehci tegra-ehci.2: d7029e90
  438.  
  439. V/PrintK  (    1): <7>tegra-ehci tegra-ehci.2: d7029da0
  440.  
  441. V/PrintK  (    1): <7>tegra-ehci tegra-ehci.2: d7029e08
  442.  
  443. D/PrintK  (    1): <6>tegra-ehci tegra-ehci.2: d7029e08
  444.  
  445. V/PrintK  (    1): <7>usb usb1: d7029e30
  446.  
  447. V/PrintK  (    1): <7>usb usb1: d7029e78
  448.  
  449. D/PrintK  (    1): <6>usb usb1: d7029e78
  450.  
  451. D/PrintK  (    1): <6>usb usb1: d7029e78
  452.  
  453. D/PrintK  (    1): <6>usb usb1: d7029e78
  454.  
  455. D/PrintK  (    1): <6>usb usb1: d7029e78
  456.  
  457. D/PrintK  (    1): <6>usb usb1: d7029e78
  458.  
  459. V/PrintK  (    1): <7>usb usb1: d7029dd8
  460.  
  461. V/PrintK  (    1): <7>usb usb1: d7029da8
  462.  
  463. V/PrintK  (    1): <7>usb usb1: d7029d68
  464.  
  465. V/PrintK  (    1): <7>hub 1-0:1.0: d7029cb8
  466.  
  467. V/PrintK  (    1): <7>hub 1-0:1.0: d7029cb8
  468.  
  469. D/PrintK  (    1): <6>hub 1-0:1.0: d7029c48
  470.  
  471. D/PrintK  (    1): <6>hub 1-0:1.0: d7029c48
  472.  
  473. V/PrintK  (    1): <7>hub 1-0:1.0: d7029c48
  474.  
  475. V/PrintK  (    1): <7>hub 1-0:1.0: d7029c48
  476.  
  477. V/PrintK  (    1): <7>hub 1-0:1.0: d7029c48
  478.  
  479. V/PrintK  (    1): <7>hub 1-0:1.0: d7029c48
  480.  
  481. V/PrintK  (    1): <7>hub 1-0:1.0: d7029c48
  482.  
  483. V/PrintK  (    1): <7>hub 1-0:1.0: d7029c48
  484.  
  485. V/PrintK  (    1): <7>hub 1-0:1.0: d7029c48
  486.  
  487. V/PrintK  (    1): <7>hub 1-0:1.0: d7029bf8
  488.  
  489. V/PrintK  (    1): <7>/home/giveen/ubuntu_tablet/kernel/dell/streak7/drivers/usb/core/inode.c: creating file '001'
  490.  
  491. D/PrintK  (    1): <6>usbcore: registered new interface driver cdc_acm
  492.  
  493. D/PrintK  (    1): <6>cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
  494.  
  495. D/PrintK  (    1): <6>usbcore: registered new interface driver cdc_wdm
  496.  
  497. D/PrintK  (    1): <6>Initializing USB Mass Storage driver...
  498.  
  499. D/PrintK  (    1): <6>usbcore: registered new interface driver usb-storage
  500.  
  501. D/PrintK  (    1): <6>USB Mass Storage support registered.
  502.  
  503. D/PrintK  (    1): <6>usbcore: registered new interface driver libusual
  504.  
  505. D/PrintK  (    1): <6>usbcore: registered new interface driver usbserial
  506.  
  507. D/PrintK  (    1): <6>USB Serial support registered for generic
  508.  
  509. D/PrintK  (    1): <6>usbcore: registered new interface driver usbserial_generic
  510.  
  511. D/PrintK  (    1): <6>usbserial: USB Serial Driver core
  512.  
  513. D/PrintK  (    1): <6>USB Serial support registered for GSM modem (1-port)
  514.  
  515. D/PrintK  (    1): <6>usbcore: registered new interface driver option
  516.  
  517. D/PrintK  (    1): <6>option: v0.7.2:USB Driver for GSM modems
  518.  
  519. D/PrintK  (    1): <6>USB Serial support registered for pl2303
  520.  
  521. D/PrintK  (    1): <6>usbcore: registered new interface driver pl2303
  522.  
  523. D/PrintK  (    1): <6>pl2303: Prolific PL2303 USB to serial adaptor driver
  524.  
  525. D/PrintK  (    1): <6>oob_wake_init: initializing oob-wake
  526.  
  527. D/PrintK  (    1): <6>NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
  528.  
  529. D/PrintK  (    1): <6>BootLog +udc_init+, NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
  530.  
  531. D/PrintK  (    1): <6>android_usb gadget: d7029ef8
  532.  
  533. D/PrintK  (    1): <6>android_usb gadget: d7029ef8
  534.  
  535. D/PrintK  (    1): <6> lun0: d7029ef8
  536.  
  537. W/PrintK  (    1): <4>Gadget Android: controller 'fsl-tegra-udc' not recognized
  538.  
  539. D/PrintK  (    1): <6>android_usb gadget: d7029f60
  540.  
  541. D/PrintK  (    1): <6>fsl-tegra-udc: bind to driver android_usb
  542.  
  543. W/PrintK  (    1): system_rev=0x9 A02=0
  544.  
  545. V/PrintK  (   16): <7>hub 1-0:1.0: d70bbf08
  546.  
  547. V/PrintK  (    1): turn on capkey LED light
  548.  
  549. D/PrintK  (    1): <6>input: ATA2538_capkey as /devices/virtual/input/input1
  550.  
  551. W/PrintK  (    1): system_rev=0x9 WIFI=0
  552.  
  553. W/PrintK  (    1): config SAR_PWR gpio[202] : output high
  554.  
  555. D/PrintK  (    1): <6>input: tegra_keypad_key as /devices/virtual/input/input2
  556.  
  557. W/PrintK  (    1): Luna Touch IMG ver. 20100429 09:53 AM
  558.  
  559. W/PrintK  (    1): touchpad_poweron_device 1062 avdd_touch & vdd_touch have been turn on
  560.  
  561. W/PrintK  (    1): INFO_LEVEL:touchpad_probe: get gpio_num 67 pinvalue 0
  562.  
  563. E/PrintK  (    0): <3>tegra-i2c tegra-i2c.2: c0639ea0
  564.  
  565. E/PrintK  (    0): <3>tegra-i2c tegra-i2c.2: c0639ea0
  566.  
  567. E/PrintK  (    0): <3>tegra-i2c tegra-i2c.2: c0639ea0
  568.  
  569. V/PrintK  (    1): ERROR_LEVEL:NvOdmPmuI2cRead8 Failed: Timeout
  570.  
  571. E/PrintK  (    0): <3>tegra-i2c tegra-i2c.2: c0639ea0
  572.  
  573. E/PrintK  (    0): <3>tegra-i2c tegra-i2c.2: c0639ea0
  574.  
  575. E/PrintK  (    0): <3>tegra-i2c tegra-i2c.2: c0639ea0
  576.  
  577. V/PrintK  (    1): ERROR_LEVEL:NvOdmPmuI2cRead8 Failed: Timeout
  578.  
  579. E/PrintK  (    0): <3>tegra-i2c tegra-i2c.2: c0639ea0
  580.  
  581. E/PrintK  (    0): <3>tegra-i2c tegra-i2c.2: c0639ea0
  582.  
  583. E/PrintK  (    0): <3>tegra-i2c tegra-i2c.2: c0639ea0
  584.  
  585. V/PrintK  (    1): ERROR_LEVEL:NvOdmPmuI2cRead8 Failed: Timeout
  586.  
  587. E/PrintK  (    0): <3>tegra-i2c tegra-i2c.2: c0639ea0
  588.  
  589. E/PrintK  (    0): <3>tegra-i2c tegra-i2c.2: c0639ea0
  590.  
  591. E/PrintK  (    0): <3>tegra-i2c tegra-i2c.2: c0639ea0
  592.  
  593. V/PrintK  (    1): ERROR_LEVEL:NvOdmPmuI2cRead8 Failed: Timeout
  594.  
  595. E/PrintK  (    0): <3>tegra-i2c tegra-i2c.2: c0639ea0
  596.  
  597. E/PrintK  (    0): <3>tegra-i2c tegra-i2c.2: c0639ea0
  598.  
  599. E/PrintK  (    0): <3>tegra-i2c tegra-i2c.2: c0639ea0
  600.  
  601. V/PrintK  (    1): ERROR_LEVEL:NvOdmPmuI2cRead8 Failed: Timeout
  602.  
  603. W/PrintK  (    1): INFO_LEVEL:read 0h 1 bytes retry at 5
  604.  
  605. W/PrintK  (    1): touch ic is NOT in bl mode
  606.  
  607. W/PrintK  (    1): ATMEL touch firmware version : 0x20
  608.  
  609. D/PrintK  (    1): <6>input: mXT224_touchscreen as /devices/virtual/input/input3
  610.  
  611. W/PrintK  (    1): touchpad_probe tp init done
  612.  
  613. W/PrintK  (    1): tp_cable_state restore T28 & T9
  614.  
  615. D/PrintK  (    1): <6>using rtc device, tps6586x-rtc, for alarms
  616.  
  617. D/PrintK  (    1): <6>tps6586x-rtc tps6586x-rtc.0: d7029eb0
  618.  
  619. D/PrintK  (    1): <6>i2c /dev entries driver
  620.  
  621. W/PrintK  (    1): BootLog, +gsensor_init+
  622.  
  623. W/PrintK  (    1): BootLog, -gsensor_init-, ret=0
  624.  
  625. W/PrintK  (    1): BootLog, +ecompass_init+
  626.  
  627. W/PrintK  (    1): BootLog, -ecompass_init-, ret=0
  628.  
  629. W/PrintK  (    1): BootLog, +lsensor_probe
  630.  
  631. D/PrintK  (    1): <6>[ALS]lsensor_i2c3_probe+
  632.  
  633. D/PrintK  (    1): <6>[ALS]lsensor_i2c3_probe-
  634.  
  635. D/PrintK  (    1): <6>[ALS]lsensor_probe, lsensor_i2c3 add Pass
  636.  
  637. D/PrintK  (    1): <6>[ALS]lsensor_probe, wait i2c probe, Pass
  638.  
  639. D/PrintK  (    1): <6>[ALS]Reg00_07 = 00 6C 50 00 00 - FF FF 02
  640.  
  641. D/PrintK  (    1): <6>[ALS]Reg12_19 = 93 04 00 00 00 - 00 00 6C
  642.  
  643. D/PrintK  (    1): <6>[ALS]lsensor_probe, Lsensor init Pass!
  644.  
  645. D/PrintK  (    1): <6>[ALS]lsensor_probe, INTR=i/p 1
  646.  
  647. D/PrintK  (    1): <6>[ALS]lsensor_probe luna_lsensor_workqueue created PASS!
  648.  
  649. D/PrintK  (    1): <6>[ALS]create /sys/devices/virtual/misc/lsensor_taos/ctrl
  650.  
  651. D/PrintK  (    1): <6>[ALS]input_allocate_device: PASS
  652.  
  653. D/PrintK  (    1): <6>input: lsensor_taos as /devices/virtual/input/input4
  654.  
  655. D/PrintK  (    1): <6>[ALS]input_register_device: PASS
  656.  
  657. W/PrintK  (    1): BootLog, -lsensor_probe, ret=0
  658.  
  659. W/PrintK  (    1): BootLog, +luna_vib_init
  660.  
  661. D/PrintK  (    1): <6>[VIB]luna_vib_probe+
  662.  
  663. D/PrintK  (    1): <6>[VIB]luna_vib_i2c0_probe+
  664.  
  665. D/PrintK  (    1): <6>[VIB]luna_vib_i2c0_probe-
  666.  
  667. D/PrintK  (    1): <6>[VIB]luna_vib_probe, i2c0 add Pass
  668.  
  669. D/PrintK  (    1): <6>[VIB]luna_vib_probe, wait i2c probe, Pass
  670.  
  671. D/PrintK  (    1): <6>[VIB]luna_vib_probe, pin[VIB_HEN]=o/p 0
  672.  
  673. D/PrintK  (    1): <6>[VIB]luna_vib_probe, pin[VIB_LEN]=o/p 1
  674.  
  675. D/PrintK  (    1): <6>[VIB]luna_vib_probe, pin[VIB_CLK]=o/p 0
  676.  
  677. D/PrintK  (    1): <6>[VIB]luna_vib_probe, Vibrator Reset, Pass
  678.  
  679. D/PrintK  (    1): <6>[VIB]luna_vib_probe, Vibrator init Pass!
  680.  
  681. D/PrintK  (    1): <6>[VIB]ctrl: create PASS, ret=0
  682.  
  683. D/PrintK  (    1): <6>[VIB]luna_vib_probe-
  684.  
  685. W/PrintK  (    1): BootLog, -luna_vib_init, ret=0
  686.  
  687. D/PrintK  (    1): <6>Linux video capture interface: v2.00
  688.  
  689. D/PrintK  (    1): <6>usbcore: registered new interface driver uvcvideo
  690.  
  691. D/PrintK  (    1): <6>USB Video Class driver (v0.1.0)
  692.  
  693. D/PrintK  (    1): <6>trpc_sema_init: registered misc dev 10:46
  694.  
  695. D/PrintK  (    1): <6>trpc_node_register: Adding 'local' to node list
  696.  
  697. D/PrintK  (    1): <6>tegra_avp_probe: allocated carveout memory at 17d00000 for AVP kernel
  698.  
  699. D/PrintK  (    1): <6>trpc_node_register: Adding 'avp-remote' to node list
  700.  
  701. D/PrintK  (    1): <6>tegra_avp_probe: message area 172ba000/172ba110
  702.  
  703. D/PrintK  (    1): <6>tegra_camera: probe
  704.  
  705. W/PrintK  (    1): BootLog, +ov5642_init+
  706.  
  707. D/PrintK  (    1): <6>ov5642 sensor driver loading
  708.  
  709. D/PrintK  (    1): <6>ov5642: probing sensor.
  710.  
  711. W/PrintK  (    1): BootLog, -ov5642_init-, ret=0
  712.  
  713. W/PrintK  (    1): BootLog, +ov9665_init+
  714.  
  715. D/PrintK  (    1): <6>[CAM]ov9665_i2c_probe+
  716.  
  717. D/PrintK  (    1): <6>[CAM]create /sys/devices/virtual/misc/ov9665/id
  718.  
  719. D/PrintK  (    1): <6>[CAM]ov9665_i2c_probe-
  720.  
  721. W/PrintK  (    1): BootLog, -ov9665_init-, ret=0
  722.  
  723. W/PrintK  (    1): BootLog, +luna_bat_init
  724.  
  725. D/PrintK  (    1): <6>[BAT]luna_bat_probe+, system_rev = 9
  726.  
  727. D/PrintK  (    1): <6>[BAT]luna_bat_i2c_probe+, client=luna_bat_i2c4, id=luna_bat_i2c4, adapter=Tegra I2C adapter, id=0, system_rev = 9
  728.  
  729. D/PrintK  (    1): <6>[BAT]luna_bat_i2c_probe-
  730.  
  731. D/PrintK  (    1): <6>[BAT]luna_bat_probe, i2c4 add Pass
  732.  
  733. D/PrintK  (    1): <6>[BAT]luna_bat_probe, wait i2c probe, Pass
  734.  
  735. D/PrintK  (    1): <6>[BAT]luna_bat_probe, pin[IUSB]=o/p 0, Active
  736.  
  737. D/PrintK  (    1): <6>[BAT]luna_bat_probe, pin[CEN ]=o/p 0, De-active
  738.  
  739. D/PrintK  (    1): <6>[BAT]luna_bat_probe, pin[DCM ]=o/p 0, De-active
  740.  
  741. D/PrintK  (    1): <6>[BAT]luna_bat_probe, pin[LIMD]=o/p 1, Active
  742.  
  743. D/PrintK  (    1): <6>[BAT]luna_bat_probe, pin[LIMB]=o/p 1, Active
  744.  
  745. D/PrintK  (    1): <6>[BAT]luna_bat_probe, pin[OTG ]=o/p 0, Active
  746.  
  747. D/PrintK  (    1): <6>[BAT]luna_bat_probe, pin[UOK ]=i/p 1, De-active
  748.  
  749. D/PrintK  (    1): <6>[BAT]luna_bat_probe, pin[FLT ]=i/p 1, De-active
  750.  
  751. D/PrintK  (    1): <6>[BAT]luna_bat_probe, pin[CHG ]=i/p 1, De-active
  752.  
  753. D/PrintK  (    1): <6>[BAT]luna_bat_probe, pin[DOK ]=i/p 1, De-active
  754.  
  755. D/PrintK  (    1): <6>[BAT]luna_bat_probe, pin[GLOW]=i/p 1, De-active
  756.  
  757. D/PrintK  (    1): <6>[BAT]luna_bat_probe, pin[BLOW]=i/p 1, De-active
  758.  
  759. D/PrintK  (    5): <6>[BAT]luna_bat_work_func_poweroff+
  760.  
  761. D/PrintK  (    5): <6>[BAT]luna_bat_work_func_poweroff-
  762.  
  763. D/PrintK  (    5): <6>[BAT]luna_bat_gauge_verify+
  764.  
  765. D/PrintK  (    5): <6>[BAT]luna_bat_gauge_verify, (02)B3 E0 78 BD (06)00 00 00 03 (0A)FF FF 59 1F (0C)FF FF
  766.  
  767. D/PrintK  (    1): <6>[BAT]luna_bat_probe-, ret=0
  768.  
  769. W/PrintK  (    1): BootLog, -luna_bat_init, ret=0
  770.  
  771. W/PrintK  (    1): bootlog, +tegra_wdt_init
  772.  
  773. W/PrintK  (   64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
  774.  
  775. W/PrintK  (   64): dog, tegra_wdt_set_timeout, !!! NOT set ptv !!!
  776.  
  777. W/PrintK  (   64): dog, +tegra_wdt_enable
  778.  
  779. W/PrintK  (    1): bootlog, -tegra_wdt_init, ret=0
  780.  
  781. D/PrintK  (    1): <6>device-mapper: uevent: version 1.0.3
  782.  
  783. D/PrintK  (    1): <6>device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
  784.  
  785. D/PrintK  (    1): <6>Bluetooth: HCI UART driver ver 2.2
  786.  
  787. D/PrintK  (    1): <6>Bluetooth: HCI H4 protocol initialized
  788.  
  789. D/PrintK  (    1): <6>Bluetooth: HCILL protocol initialized
  790.  
  791. D/PrintK  (    1): <6>Bluetooth: BlueSleep Mode Driver Ver 1.1
  792.  
  793. E/PrintK  (    1): <3>bluesleep_probe: get bt_ext_wake gpio from bcom4329_get_wakepin
  794.  
  795. E/PrintK  (    1):
  796.  
  797. D/PrintK  (    1): <6>cpuidle: using governor ladder
  798.  
  799. D/PrintK  (    1): <6>cpuidle: using governor menu
  800.  
  801. D/PrintK  (    1): <6>sdhci: Secure Digital Host Controller Interface driver
  802.  
  803. D/PrintK  (    1): <6>sdhci: Copyright(c) Pierre Ossman
  804.  
  805. W/PrintK  (    1): [sdcard] ok to allocate memory!
  806.  
  807. W/PrintK  (    1): <4>mmc0: Invalid maximum block size, assuming 512 bytes
  808.  
  809. W/PrintK  (    1): <4>sdhci-tegra.3 supply vmmc not found, using dummy regulator
  810.  
  811. D/PrintK  (    1): <6>mmc0: SDHCI controller on tegra [sdhci-tegra.3] using ADMA
  812.  
  813. D/PrintK  (    1): <6>sdhci3: initialized irq 63 ioaddr fe600600
  814.  
  815. W/PrintK  (    1): <4>mmc1: Invalid maximum block size, assuming 512 bytes
  816.  
  817. D/PrintK  (    1): <6>mmc1: SDHCI controller on tegra [sdhci-tegra.2] using ADMA
  818.  
  819. D/PrintK  (    1): <6>sdhci2: initialized irq 51 ioaddr fe600400
  820.  
  821. W/PrintK  (    1): <4>mmc2: Invalid maximum block size, assuming 512 bytes
  822.  
  823. W/PrintK  (    1): <4>sdhci-tegra.0 supply vmmc not found, using dummy regulator
  824.  
  825. D/PrintK  (    1): <6>mmc2: SDHCI controller on tegra [sdhci-tegra.0] using ADMA
  826.  
  827. D/PrintK  (    1): <6>sdhci0: initialized irq 46 ioaddr fe600000
  828.  
  829. W/PrintK  (    1): BootLog, +luna_led_init
  830.  
  831. D/PrintK  (    1): <6>[LED]luna_led_probe+
  832.  
  833. V/PrintK  (    1): <7>Registered led device: red
  834.  
  835. V/PrintK  (    1): <7>Registered led device: green
  836.  
  837. D/PrintK  (    1): <6>[LED]luna_led_probe- PASS, ret=0
  838.  
  839. W/PrintK  (    1): BootLog, -luna_led_init, ret=0
  840.  
  841. W/PrintK  (    1): BootLog, +usimplug_init+
  842.  
  843. D/PrintK  (    1): <6>usimplug: usimplug_probe()
  844.  
  845. D/PrintK  (    1): <6>usimplug: default state 1
  846.  
  847. D/PrintK  (    1): <6>usimplug: usimplug_probe(), ret=0
  848.  
  849. W/PrintK  (    1): BootLog, -usimplug_init-, ret=0
  850.  
  851. D/PrintK  (    1): <6>tegra-aes tegra-aes: d7029ed8
  852.  
  853. D/PrintK  (    1): <6>usbcore: registered new interface driver usbhid
  854.  
  855. D/PrintK  (    1): <6>usbhid: USB HID core driver
  856.  
  857. D/PrintK  (    1): <6>logger: created 1024K log 'log_main'
  858.  
  859. D/PrintK  (    1): <6>logger: created 256K log 'log_events'
  860.  
  861. D/PrintK  (    1): <6>logger: created 512K log 'log_radio'
  862.  
  863. D/PrintK  (    1): <6>logger: created 64K log 'log_system'
  864.  
  865. D/PrintK  (    1): <6>usbcore: registered new interface driver snd-usb-audio
  866.  
  867. W/PrintK  (    1): AUDIO_CODEC: cdev_alloc
  868.  
  869. D/PrintK  (    1): <6>WM8903 0-001a: d7029ea8
  870.  
  871. D/PrintK  (   47): <6>mmc0: new high speed MMC card at address 0001
  872.  
  873. D/PrintK  (   47): <6>mmcblk3: mmc0:0001 SEM16G 14.8 GiB
  874.  
  875. W/PrintK  (   47): <4>Alternate GPT is invalid, using primary GPT.
  876.  
  877. D/PrintK  (   47): <6> mmcblk3: p1 (SOS) p2 (LNX) p3 (APP) p4 (CAC) p5 (MSC) p6 (FDR) p7 (OLG) p8 (LGF) p9 (RES) p10 (RGN) p11 (VAR) p12 (USP) p13 (UDA) p14 (WP1) p15 (WP2)
  878.  
  879. W/PrintK  (   47): <4>Qisda backdoor: set p15 to read-only
  880.  
  881. D/PrintK  (    5): <6>[BAT]luna_bat_gauge_verify, TestSOC = 201 193 ### PASS ###
  882.  
  883. D/PrintK  (   47): <6>mmc1: new high speed SDHC card at address b368
  884.  
  885. D/PrintK  (   47): <6>mmcblk2: mmc1:b368 00000 7.51 GiB
  886.  
  887. D/PrintK  (   47): <6> mmcblk2: p1
  888.  
  889. D/PrintK  (    1): <6>tegra_i2s_driver_probe
  890.  
  891. D/PrintK  (    1): <6>tegra_i2s_driver_probe
  892.  
  893. D/PrintK  (    1): <6>i2s_set_channel_bit_count: enabling non-symmetric mode
  894.  
  895. D/PrintK  (    1): <6>tegra_spdif_driver_probe
  896.  
  897. D/PrintK  (    1): <6>BootLog +soc_probe+
  898.  
  899. D/PrintK  (    1): <6>asoc: WM8903 <-> tegra-i2s-1 mapping ok
  900.  
  901. D/PrintK  (    1): <6>asoc: tegra_generic_voice_codec <-> tegra-i2s-2 mapping ok
  902.  
  903. D/PrintK  (    1): <6>asoc: tegra_generic_spdif_codec <-> tegra-spdif mapping ok
  904.  
  905. D/PrintK  (    1): <6>BootLog +tegra_jack_init+
  906.  
  907. V/PrintK  (    1): <7>[ASOC-DBG]tegra_ext_control +tegra_ext_control, newcon: 0
  908.  
  909. V/PrintK  (    1):
  910.  
  911. D/PrintK  (    1): <6>input: tegra Wired Accessory Hook as /devices/platform/soc-audio/sound/card0/input5
  912.  
  913. D/PrintK  (    1): <6>input: tegra Dock Detection as /devices/platform/soc-audio/sound/card0/input6
  914.  
  915. D/PrintK  (    1): <6>input: tegra Wired Accessory Jack as /devices/platform/soc-audio/sound/card0/input7
  916.  
  917. D/PrintK  (    1): <6>BootLog -soc_probe-
  918.  
  919. D/PrintK  (    1): <6>ALSA device list:
  920.  
  921. D/PrintK  (    1): <6>  #0: tegra (WM8903)
  922.  
  923. D/PrintK  (    1): <6>GACT probability NOT on
  924.  
  925. D/PrintK  (    1): <6>Mirror/redirect action on
  926.  
  927. D/PrintK  (    1): <6>u32 classifier
  928.  
  929. D/PrintK  (    1): <6>    Actions configured
  930.  
  931. D/PrintK  (    1): <6>Netfilter messages via NETLINK v0.30.
  932.  
  933. D/PrintK  (    1): <6>nf_conntrack version 0.5.0 (5805 buckets, 23220 max)
  934.  
  935. D/PrintK  (    1): <6>ctnetlink v0.93: registering with nfnetlink.
  936.  
  937. D/PrintK  (    1): <6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  938.  
  939. D/PrintK  (    1): <6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  940.  
  941. D/PrintK  (    1): <6>xt_time: kernel timezone is -0000
  942.  
  943. D/PrintK  (    1): <6>IPv4 over IPv4 tunneling driver
  944.  
  945. D/PrintK  (    1): <6>GRE over IPv4 tunneling driver
  946.  
  947. D/PrintK  (    1): <6>ip_tables: (C) 2000-2006 Netfilter Core Team
  948.  
  949. D/PrintK  (    1): <6>ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
  950.  
  951. D/PrintK  (    1): <6>arp_tables: (C) 2002 David S. Miller
  952.  
  953. D/PrintK  (    1): <6>TCP cubic registered
  954.  
  955. D/PrintK  (    1): <6>NET: Registered protocol family 10
  956.  
  957. D/PrintK  (    1): <6>lo: Disabled Privacy Extensions
  958.  
  959. D/PrintK  (    1): <6>tunl0: Disabled Privacy Extensions
  960.  
  961. D/PrintK  (    1): <6>Mobile IPv6
  962.  
  963. D/PrintK  (    1): <6>ip6_tables: (C) 2000-2006 Netfilter Core Team
  964.  
  965. D/PrintK  (    1): <6>IPv6 over IPv4 tunneling driver
  966.  
  967. D/PrintK  (    1): <6>sit0: Disabled Privacy Extensions
  968.  
  969. D/PrintK  (    1): <6>ip6tnl0: Disabled Privacy Extensions
  970.  
  971. D/PrintK  (    1): <6>NET: Registered protocol family 17
  972.  
  973. D/PrintK  (    1): <6>NET: Registered protocol family 15
  974.  
  975. D/PrintK  (    1): <6>Bluetooth: L2CAP ver 2.15
  976.  
  977. D/PrintK  (    1): <6>Bluetooth: L2CAP socket layer initialized
  978.  
  979. D/PrintK  (    1): <6>Bluetooth: SCO (Voice Link) ver 0.6
  980.  
  981. D/PrintK  (    1): <6>Bluetooth: SCO socket layer initialized
  982.  
  983. D/PrintK  (    1): <6>Bluetooth: RFCOMM TTY layer initialized
  984.  
  985. D/PrintK  (    1): <6>Bluetooth: RFCOMM socket layer initialized
  986.  
  987. D/PrintK  (    1): <6>Bluetooth: RFCOMM ver 1.11
  988.  
  989. D/PrintK  (    1): <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  990.  
  991. D/PrintK  (    1): <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  992.  
  993. D/PrintK  (    1): <6>lib80211: common routines for IEEE802.11 drivers
  994.  
  995. V/PrintK  (    1): <7>lib80211_crypt: registered algorithm 'NULL'
  996.  
  997. D/PrintK  (    1): <6>ThumbEE CPU extension supported.
  998.  
  999. W/PrintK  (    1): <4>Disabling clock audio left on by bootloader
  1000.  
  1001. W/PrintK  (    1): <4>Disabling clock stat_mon left on by bootloader
  1002.  
  1003. W/PrintK  (    1): <4>Disabling clock fuse_burn left on by bootloader
  1004.  
  1005. W/PrintK  (    1): <4>Disabling clock pll_c_out1 left on by bootloader
  1006.  
  1007. W/PrintK  (    1): <4>Disabling clock pll_c left on by bootloader
  1008.  
  1009. E/PrintK  (    1): <3>Tegra protected aperture disabled because nvmap is using system memory
  1010.  
  1011. D/PrintK  (    1): <6>[PMU]tps6586x_regulator_enable, REG-GPIO_3
  1012.  
  1013. E/PrintK  (    1): <3>## hdmi_enb_init ##
  1014.  
  1015. D/PrintK  (    1): <6>input: Luna headset as /devices/virtual/input/input8
  1016.  
  1017. D/PrintK  (    5): <6>[BAT]luna_bat_gauge_verify, VCELL = 3597 (B3 E0), SOC = 60 (78 BD)
  1018.  
  1019. D/PrintK  (    5): <6>[BAT]luna_bat_gauge_verify- ### PASS ###
  1020.  
  1021. D/PrintK  (    5): <6>[BAT]luna_bat_work_func Gauge verify PASS!
  1022.  
  1023. W/PrintK  (    5): tp_cable_state restore T28 & T9
  1024.  
  1025. D/PrintK  (    5): <6>[BAT]## bat_status: Unknown -> Discharging
  1026.  
  1027. D/PrintK  (    5): <6>[BAT]## bat_health: Unknown -> Good
  1028.  
  1029. D/PrintK  (    5): <6>[BAT]## bat_cap=60(60), vol=3597, temp=279, ac=0(0), usb=0(0) 0mA, chg=0
  1030.  
  1031. D/PrintK  (    1): <6>ventana_ov5642_late_init()+
  1032.  
  1033. D/PrintK  (    1): <6>[PMU]tps6586x_ldo_set_voltage,  REG-LDO_5 2850~2850
  1034.  
  1035. D/PrintK  (    1): <6>[PMU]tps6586x_ldo_set_voltage,  REG-LDO_0 2850~2850
  1036.  
  1037. D/PrintK  (    1): <6>ventana_ov5642_late_init()-, ret 0
  1038.  
  1039. D/PrintK  (    1): <6>ventana_datacards_late_init()
  1040.  
  1041. E/PrintK  (    1): <3>__datacards_gpio_request: request ventana_datacards_3v3 failed (-16)
  1042.  
  1043. D/PrintK  (    1): <6>VFP support v0.3:
  1044.  
  1045. V/PrintK  (    1): implementor 41 architecture 3 part 30 variant 9 rev 1
  1046.  
  1047. D/PrintK  (    1): <6>tps6586x-rtc tps6586x-rtc.0: d7029f40
  1048.  
  1049. W/PrintK  (    1): <4>Warning: unable to open an initial console.
  1050.  
  1051. D/PrintK  (    1): <6>Freeing init memory: 188K
  1052.  
  1053. W/PrintK  (    1): <4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  1054.  
  1055. E/PrintK  (    1): <3>init: could not open /dev/keychord
  1056.  
  1057. D/PrintK  (   81): <6>EXT4-fs (mmcblk3p3):
  1058.  
  1059. V/PrintK  (   81): INFO: recovery required on readonly filesystem
  1060.  
  1061. V/PrintK  (   81):
  1062.  
  1063. D/PrintK  (   81): <6>EXT4-fs (mmcblk3p3):
  1064.  
  1065. V/PrintK  (   81): write access will be enabled during recovery
  1066.  
  1067. V/PrintK  (   81):
  1068.  
  1069. D/PrintK  (   81): <6>EXT4-fs (mmcblk3p3):
  1070.  
  1071. V/PrintK  (   81): recovery complete
  1072.  
  1073. V/PrintK  (   81):
  1074.  
  1075. D/PrintK  (   81): <6>EXT4-fs (mmcblk3p3):
  1076.  
  1077. V/PrintK  (   81): mounted filesystem with ordered data mode. Opts: (null)
  1078.  
  1079. V/PrintK  (   81):
  1080.  
  1081. D/PrintK  (   81): <6>EXT4-fs (mmcblk3p4):
  1082.  
  1083. V/PrintK  (   81): mounted filesystem with ordered data mode. Opts: errors=panic
  1084.  
  1085. V/PrintK  (   81):
  1086.  
  1087. D/PrintK  (    5): <6>[BAT]## bat_cap=60(59), vol=3592, temp=282, ac=0(0), usb=0(0) 0mA, chg=0
  1088.  
  1089. D/PrintK  (   81): <6>EXT4-fs (mmcblk3p13):
  1090.  
  1091. V/PrintK  (   81): recovery complete
  1092.  
  1093. V/PrintK  (   81):
  1094.  
  1095. D/PrintK  (   81): <6>EXT4-fs (mmcblk3p13):
  1096.  
  1097. V/PrintK  (   81): mounted filesystem with ordered data mode. Opts: errors=panic
  1098.  
  1099. V/PrintK  (   81):
  1100.  
  1101. E/PrintK  (    1): <3>init: cannot find '/system/bin/vold', disabling 'vold'
  1102.  
  1103. E/PrintK  (    1): <3>init: cannot find '/system/bin/netd', disabling 'netd'
  1104.  
  1105. E/PrintK  (    1): <3>init: cannot find '/system/bin/app_process', disabling 'zygote'
  1106.  
  1107. E/PrintK  (    1): <3>init: cannot find '/system/bin/keystore', disabling 'keystore'
  1108.  
  1109. V/PrintK  (    1): <7>opening ttyHS2...
  1110.  
  1111. V/PrintK  (    1): <7>ttyHS2 flags a00
  1112.  
  1113. V/PrintK  (    1): <7>tty_release_dev of ttyHS2 (tty count=1)...
  1114.  
  1115. V/PrintK  (    1): <7>ttyHS2 flags a00
  1116.  
  1117. V/PrintK  (    1): <7>freeing tty structure...
  1118.  
  1119. V/PrintK  (    1): <7>opening ttyHS2...
  1120.  
  1121. V/PrintK  (    1): <7>ttyHS2 flags a00
  1122.  
  1123. V/PrintK  (    1): <7>tty_release_dev of ttyHS2 (tty count=1)...
  1124.  
  1125. V/PrintK  (    1): <7>ttyHS2 flags a00
  1126.  
  1127. V/PrintK  (    1): <7>freeing tty structure...
  1128.  
  1129. V/PrintK  (    1): <7>opening ttyHS3...
  1130.  
  1131. V/PrintK  (    1): <7>ttyHS3 flags a00
  1132.  
  1133. V/PrintK  (    1): <7>tty_release_dev of ttyHS3 (tty count=1)...
  1134.  
  1135. V/PrintK  (    1): <7>ttyHS3 flags a00
  1136.  
  1137. V/PrintK  (    1): <7>freeing tty structure...
  1138.  
  1139. V/PrintK  (    1): <7>opening ttyHS3...
  1140.  
  1141. V/PrintK  (    1): <7>ttyHS3 flags a00
  1142.  
  1143. V/PrintK  (    1): <7>tty_release_dev of ttyHS3 (tty count=1)...
  1144.  
  1145. V/PrintK  (    1): <7>ttyHS3 flags a00
  1146.  
  1147. V/PrintK  (    1): <7>freeing tty structure...
  1148.  
  1149. I/installd(   96): installd firing up
  1150.  
  1151. E/PrintK  (    1): <3>init: service 'console' requires console
  1152.  
  1153. E/PrintK  (    1): <3>android_usb: already disabled
  1154.  
  1155. D/PrintK  (    1): <6>adb_bind_config
  1156.  
  1157. D/PrintK  (    1): <6>adb_bind_config
  1158.  
  1159. D/PrintK  (  109): <6>adb_open
  1160.  
  1161. V/PrintK  (  118): <7>tty_reopen: pts0 flags a00
  1162.  
  1163. V/PrintK  (  118): <7>opening pts0...
  1164.  
  1165. V/PrintK  (  118): <7>pts0 flags a00
  1166.  
  1167. I/DEBUG   (   91): debuggerd: Feb 26 2013 10:27:21
  1168.  
  1169. I/cm      (  129): ____ _   _ ____ _  _ ____ ____ ____ _  _ _  _ ____ ___
  1170.  
  1171. I/cm      (  131): |     \_/  |__| |\ | |  | | __ |___ |\ | |\/| |  | |  \
  1172.  
  1173. I/cm      (  133): |___   |   |  | | \| |__| |__] |___ | \| |  | |__| |__/
  1174.  
  1175. I/cm      (  144): Welcome to Android 4.2.1 / CyanogenMod-10.1-20130226-UNOFFICIAL-streak7
  1176.  
  1177. V/PrintK  (  118): <7>tty_release_dev of pts0 (tty count=2)...
  1178.  
  1179. V/PrintK  (  118): <7>pts0 flags a01
  1180.  
  1181. V/PrintK  (  114): <7>tty_release_dev of ptm0 (tty count=1)...
  1182.  
  1183. V/PrintK  (  114): <7>ptm0 flags a05
  1184.  
  1185. V/PrintK  (  114): <7>pts0 vhangup...
  1186.  
  1187. V/PrintK  (  114): <7>pts0 flags a05
  1188.  
  1189. V/PrintK  (  114): <7>freeing tty structure...
  1190.  
  1191. D/PrintK  (   92): <6>warning: `rild' uses 32-bit capabilities (legacy support in use)
  1192.  
  1193. I/SurfaceFlinger(   93): SurfaceFlinger is starting
  1194.  
  1195. I/SurfaceFlinger(   93): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
  1196.  
  1197. I/ServiceManager(   98): Waiting for service SurfaceFlinger...
  1198.  
  1199. D/PrintK  (  145): <6>Adding 102396k swap on /data/ubuntu/SWAP.swap.  Priority:-1 extents:3 across:176124k SS
  1200.  
  1201. D/libEGL  (   93): loaded /system/lib/egl/libEGL_tegra.so
  1202.  
  1203. D/libEGL  (   93): loaded /system/lib/egl/libGLESv1_CM_tegra.so
  1204.  
  1205. D/NvOsDebugPrintf(   93): NvRmPrivGetChipIdStub: Could not read Tegra chip id/rev
  1206.  
  1207.  
  1208. D/NvOsDebugPrintf(   93): Expected on kernels without Tegra3 support, using Tegra2
  1209.  
  1210. D/libEGL  (   93): loaded /system/lib/egl/libGLESv2_tegra.so
  1211.  
  1212. I/gralloc (   93): using (fd=28)
  1213.  
  1214. I/gralloc (   93): id           = tegra_fb
  1215.  
  1216. I/gralloc (   93): xres         = 800 px
  1217.  
  1218. I/gralloc (   93): yres         = 480 px
  1219.  
  1220. I/gralloc (   93): xres_virtual = 800 px
  1221.  
  1222. I/gralloc (   93): yres_virtual = 960 px
  1223.  
  1224. I/gralloc (   93): bpp          = 32
  1225.  
  1226. I/gralloc (   93): r            =  0:8
  1227.  
  1228. I/gralloc (   93): g            =  8:8
  1229.  
  1230. I/gralloc (   93): b            = 16:8
  1231.  
  1232. I/gralloc (   93): smem_start   = 0x17800000
  1233.  
  1234. I/gralloc (   93): smem_len     = 0x00200000
  1235.  
  1236. I/gralloc (   93): format       = 1
  1237.  
  1238. I/gralloc (   93): stride       = 800
  1239.  
  1240. I/gralloc (   93): width        = 127 mm (160.000000 dpi)
  1241.  
  1242. I/gralloc (   93): height       = 76 mm (160.421051 dpi)
  1243.  
  1244. I/gralloc (   93): refresh rate = 60.00 Hz
  1245.  
  1246. I/SurfaceFlinger(   93): Using composer version 0.1
  1247.  
  1248. W/SurfaceFlinger(   93): getting VSYNC period from fb HAL: 16666666
  1249.  
  1250. W/SurfaceFlinger(   93): no suitable EGLConfig found, trying without EGL_FRAMEBUFFER_TARGET_ANDROID
  1251.  
  1252. E/Trace   (   93): error opening trace file: No such file or directory (2)
  1253.  
  1254. I/SurfaceFlinger(   93): EGL informations:
  1255.  
  1256. I/SurfaceFlinger(   93): vendor    : Android
  1257.  
  1258. I/SurfaceFlinger(   93): version   : 1.4 Android META-EGL
  1259.  
  1260. I/SurfaceFlinger(   93): extensions: EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_pixmap EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_fence_sync EGL_NV_system_time EGL_ANDROID_image_native_buffer
  1261.  
  1262. I/SurfaceFlinger(   93): Client API: OpenGL_ES
  1263.  
  1264. I/SurfaceFlinger(   93): EGLSurface: 8-8-8-8, config=0xcaf32c
  1265.  
  1266. I/SurfaceFlinger(   93): OpenGL ES informations:
  1267.  
  1268. I/SurfaceFlinger(   93): vendor    : NVIDIA Corporation
  1269.  
  1270. I/SurfaceFlinger(   93): renderer  : NVIDIA AP
  1271.  
  1272. I/SurfaceFlinger(   93): version   : OpenGL ES-CM 1.1
  1273.  
  1274. I/SurfaceFlinger(   93): extensions: GL_EXT_debug_marker GL_EXT_bgra GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_s3tc GL_EXT_texture_format_BGRA8888 GL_EXT_unpack_subimage GL_NV_texture_npot_2D_mipmap GL_OES_byte_coordinates GL_OES_compressed_ETC1_RGB8_texture GL_OES_compressed_paletted_texture GL_OES_draw_texture GL_OES_extended_matrix_palette GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_EGL_sync GL_OES_fbo_render_mipmap GL_OES_fixed_point GL_OES_framebuffer_object GL_OES_matrix_get GL_OES_matrix_palette GL_OES_point_size_array GL_OES_point_sprite GL_OES_query_matrix GL_OES_read_format GL_OES_rgb8_rgba8 GL_OES_single_precision GL_OES_stencil8 GL_OES_texture_cube_map GL_OES_vertex_half_float
  1275.  
  1276. I/SurfaceFlinger(   93): GL_MAX_TEXTURE_SIZE = 2048
  1277.  
  1278. I/SurfaceFlinger(   93): GL_MAX_VIEWPORT_DIMS = 3839 x 3839
  1279.  
  1280. E/PrintK  (    1): <3>init: no such service 'bootanim'
  1281.  
  1282. D/SurfaceFlinger(   93): Screen acquired, type=0 flinger=0x2adc1318
  1283.  
  1284. E/Trace   (   98): error opening trace file: No such file or directory (2)
  1285.  
  1286. I/ubuntu::detail::ApplicationManager(   98): virtual bool android::InputSetup::DummyApplication::updateInfo()
  1287.  
  1288. I/ubuntu::detail::ApplicationManager(   98): virtual bool android::InputSetup::DummyApplicationWindow::updateInfo()
  1289.  
  1290. I/mediaserver(   95): ServiceManager: 0x2bbfddd0
  1291.  
  1292. I/AudioFlinger(   95): Using default 3000 mSec as standby time.
  1293.  
  1294. I/CameraService(   95): CameraService started (pid=95)
  1295.  
  1296. E/CameraService(   95): Could not load camera HAL module
  1297.  
  1298. I/AudioPolicyManagerBase(   95): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf
  1299.  
  1300. D/EventHub(   98): No input device configuration file found for device 'Luna headset'.
  1301.  
  1302. D/PrintK  (   95): <6>tegra_audio_route : device_new : 4
  1303.  
  1304. V/PrintK  (   95): <7>[ASOC-DBG]tegra_ext_control +tegra_ext_control, newcon: 4
  1305.  
  1306. V/PrintK  (   95):
  1307.  
  1308. I/AudioFlinger(   95): loadHwModule() Loaded primary audio interface from Betelgeuse audio HW HAL (audio) handle 1
  1309.  
  1310. I/AudioFlinger(   95): HAL output buffer size 512 frames, normal mix buffer size 1024 frames
  1311.  
  1312. I/EventHub(   98): New device: id=1, fd=33, path='/dev/input/event8', name='Luna headset', classes=0x1, configuration='', keyLayout='/system/usr/keylayout/Generic.kl', keyCharacterMap='/system/usr/keychars/Generic.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
  1313.  
  1314. I/AudioMixer(   95): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project
  1315.  
  1316. E/MonoPipe(   95): Failed to fetch local time frequency when constructing a MonoPipe (res = -32).  getNextWriteTimestamp calls will be non-functional
  1317.  
  1318. W/AudioFlinger(   95): Policy SCHED_FIFO priority 3 is unavailable for pid 95 tid 162; error -1
  1319.  
  1320. I/AudioFlinger(   95): Using module 1 has the primary audio interface
  1321.  
  1322. I/AudioFlinger(   95): AudioFlinger's thread 0x2bc07910 ready to run
  1323.  
  1324. W/AudioFlinger(   95): Thread AudioOut_2 cannot connect to the power manager service
  1325.  
  1326. W/AudioFlinger(   95): Thread AudioOut_2 cannot connect to the power manager service
  1327.  
  1328. E/AudioFlinger(   95): int android::load_audio_interface(const char*, audio_hw_device_t**) couldn't load audio hw module audio.a2dp (No such file or directory)
  1329.  
  1330. I/AudioFlinger(   95): loadHwModule() error -2 loading module a2dp
  1331.  
  1332. W/AudioPolicyManagerBase(   95): could not open HW module a2dp
  1333.  
  1334. I/AudioFlinger(   95): loadHwModule() Loaded usb audio interface from USB audio HW HAL (audio) handle 3
  1335.  
  1336. I/AudioPolicyService(   95): Loaded audio policy from LEGACY Audio Policy HAL (audio_policy)
  1337.  
  1338. D/EventHub(   98): No input device configuration file found for device 'lsensor_taos'.
  1339.  
  1340. I/EventHub(   98): New device: id=3, fd=34, path='/dev/input/event3', name='mXT224_touchscreen', classes=0x14, configuration='/system/usr/idc/mXT224_touchscreen.idc', keyLayout='', keyCharacterMap='', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
  1341.  
  1342. W/PrintK  (   98): int work and work Q for sar
  1343.  
  1344. D/EventHub(   98): No input device configuration file found for device 'tegra_keypad_key'.
  1345.  
  1346. I/EventHub(   98): New device: id=4, fd=35, path='/dev/input/event2', name='tegra_keypad_key', classes=0x1, configuration='', keyLayout='/system/usr/keylayout/Generic.kl', keyCharacterMap='/system/usr/keychars/Generic.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
  1347.  
  1348. D/EventHub(   98): No input device configuration file found for device 'ATA2538_capkey'.
  1349.  
  1350. I/EventHub(   98): New device: id=5, fd=36, path='/dev/input/event1', name='ATA2538_capkey', classes=0x1, configuration='', keyLayout='/system/usr/keylayout/ATA2538_capkey.kl', keyCharacterMap='/system/usr/keychars/Generic.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
  1351.  
  1352. D/EventHub(   98): No input device configuration file found for device 'sensors_daemon'.
  1353.  
  1354. D/EventHub(   98): No input device configuration file found for device 'tegra Wired Accessory Jack'.
  1355.  
  1356. I/EventHub(   98): New device: id=7, fd=37, path='/dev/input/event7', name='tegra Wired Accessory Jack', classes=0x80, configuration='', keyLayout='', keyCharacterMap='', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
  1357.  
  1358. D/EventHub(   98): No input device configuration file found for device 'tegra Dock Detection'.
  1359.  
  1360. I/EventHub(   98): New device: id=8, fd=38, path='/dev/input/event6', name='tegra Dock Detection', classes=0x80, configuration='', keyLayout='', keyCharacterMap='', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
  1361.  
  1362. D/EventHub(   98): No input device configuration file found for device 'tegra Wired Accessory Hook'.
  1363.  
  1364. I/EventHub(   98): New device: id=9, fd=39, path='/dev/input/event5', name='tegra Wired Accessory Hook', classes=0x80, configuration='', keyLayout='', keyCharacterMap='', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false
  1365.  
  1366. I/InputReader(   98): Device added: id=-1, name='Virtual', sources=0x00000301
  1367.  
  1368. I/InputReader(   98): Device added: id=9, name='tegra Wired Accessory Hook', sources=0x80000000
  1369.  
  1370. I/InputReader(   98): Device added: id=8, name='tegra Dock Detection', sources=0x80000000
  1371.  
  1372. I/InputReader(   98): Device added: id=7, name='tegra Wired Accessory Jack', sources=0x80000000
  1373.  
  1374. I/InputReader(   98): Device added: id=5, name='ATA2538_capkey', sources=0x00000101
  1375.  
  1376. I/InputReader(   98): Device added: id=4, name='tegra_keypad_key', sources=0x00000101
  1377.  
  1378. I/InputReader(   98): Device reconfigured: id=3, name='mXT224_touchscreen', size 800x480, orientation 0, mode 1, display id 0
  1379.  
  1380. I/InputReader(   98): Device added: id=3, name='mXT224_touchscreen', sources=0x00001002
  1381.  
  1382. I/InputReader(   98): Device added: id=1, name='Luna headset', sources=0x00000101
  1383.  
  1384. W/PrintK  (   64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
  1385.  
  1386. D/SensorService(   97): nuSensorService starting...
  1387.  
  1388. D/Sensors (   97): libsensors: Entering function m_open_sensors with param name = poll
  1389.  
  1390. D/Sensors (   97): libsensors: Entering function m_poll_activate with handle = 1, enable = 0
  1391.  
  1392. D/Sensors (   97): activate_mag(0)
  1393.  
  1394. D/Sensors (   97): libsensors: Entering function m_poll_activate with handle = 0, enable = 0
  1395.  
  1396. D/Sensors (   97): activate_acc(0)
  1397.  
  1398. D/Sensors (   97): active_acc disabling
  1399.  
  1400. D/Sensors (   97): libsensors: Entering function m_poll_activate with handle = 2, enable = 0
  1401.  
  1402. D/Sensors (   97): activate_orientation(0)
  1403.  
  1404. I/SensorService(   97): AK8975 3-axis Magnetic field sensor
  1405.  
  1406. I/SensorService(   97): LSM303DLH 3-axis Accelerometer sensor
  1407.  
  1408. I/SensorService(   97): LSM303DLH 3-axis Orientation sensor
  1409.  
  1410. D/SensorService(   97): nuSensorService thread starting...
  1411.  
  1412. D/PrintK  (    0): <6>[BAT]luna_bat_dok_irq_handler ## [DOK] (queue work)
  1413.  
  1414. D/PrintK  (   17): <6>[PMU]tps6586x_irq+
  1415.  
  1416. D/PrintK  (   17): <6>[PMU]tps6586x_irq-, acks=00040000
  1417.  
  1418. D/PrintK  (   39): <6>tegra-otg tegra-otg: d7231f38
  1419.  
  1420. V/PrintK  (   39): fsl_udc_core: VBUS on, cable connected
  1421.  
  1422. W/PrintK  (    0): [USB]fsl_vbus_draw current = 2 mA
  1423.  
  1424. D/PrintK  (    0): <6>[BAT]Set [USB 100]
  1425.  
  1426. W/PrintK  (    5): tp_cable_state set T28[16] & T9
  1427.  
  1428. D/PrintK  (    5): <6>[BAT]## usb_online: 0 -> 1 (1)
  1429.  
  1430. D/PrintK  (    5): <6>[BAT]## usb_current: 0 -> 100
  1431.  
  1432. D/PrintK  (    5): <6>[BAT]## wake_lock: 0->1, vol=3598, glow=1, ac=0(0), usb=1(1), chg=4956, soc=59
  1433.  
  1434. D/PrintK  (   39): <6>android_work: did not send uevent (0 0 (null))
  1435.  
  1436. W/PrintK  (    5): rid=f msg=10 10 0 0 0 0 0 checksum=ff
  1437.  
  1438. D/PrintK  (   39): <6>android_work: sent uevent USB_STATE=CONNECTED
  1439.  
  1440. D/PrintK  (   39): <6>android_work: sent uevent USB_STATE=DISCONNECTED
  1441.  
  1442. D/PrintK  (   39): <6>android_work: sent uevent USB_STATE=CONNECTED
  1443.  
  1444. W/PrintK  (    0): [USB]fsl_vbus_draw current = 2 mA
  1445.  
  1446. D/PrintK  (    0): <6>[BAT]Set [USB 100]
  1447.  
  1448. D/PrintK  (   39): <6>android_work: sent uevent USB_STATE=DISCONNECTED
  1449.  
  1450. D/PrintK  (   39): <6>android_work: sent uevent USB_STATE=DISCONNECTED
  1451.  
  1452. D/PrintK  (   39): <6>android_work: sent uevent USB_STATE=CONNECTED
  1453.  
  1454. D/PrintK  (   39): <6>android_work: sent uevent USB_STATE=CONNECTED
  1455.  
  1456. D/PrintK  (    0): <6>android_usb gadget: c0639e18
  1457.  
  1458. V/PrintK  (    0): [USB]fsl_vbus_draw current = 500 mA
  1459.  
  1460. D/PrintK  (    0): <6>[BAT]Set [USB 500]
  1461.  
  1462. D/PrintK  (   39): <6>android_work: sent uevent USB_STATE=CONFIGURED
  1463.  
  1464. D/PrintK  (    5): <6>[BAT]## usb_current: 100 -> 500
  1465.  
  1466. W/PrintK  (   64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
  1467.  
  1468. V/PrintK  (  184): <7>opening pts0...
  1469.  
  1470. V/PrintK  (  184): <7>pts0 flags a00
  1471.  
  1472. V/PrintK  (  184): <7>tty_reopen: pts0 flags a00
  1473.  
  1474. V/PrintK  (  109): <7>tty_release_dev of ptm0 (tty count=1)...
  1475.  
  1476. V/PrintK  (  109): <7>ptm0 flags a01
  1477.  
  1478. V/PrintK  (  109): <7>pts0 vhangup...
  1479.  
  1480. V/PrintK  (  109): <7>pts0 flags a05
  1481.  
  1482. V/PrintK  (  184): <7>hung_up_tty_write ...
  1483.  
  1484. V/PrintK  (  184): <7>tty_release_dev of pts0 (tty count=1)...
  1485.  
  1486. V/PrintK  (  184): <7>pts0 flags 40a04
  1487.  
  1488. V/PrintK  (  184): <7>freeing tty structure...
  1489.  
  1490. V/PrintK  (   64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
  1491.  
  1492. W/PrintK  (   64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
  1493.  
  1494. V/PrintK  (    5): <7>hub 1-0:1.0: d7031ec8
  1495.  
  1496. V/PrintK  (    5): <7>usb usb1: d7031eb8
  1497.  
  1498. V/PrintK  (    5): <7>tegra-ehci tegra-ehci.2: d7031e70
  1499.  
  1500. D/PrintK  (    5): <6>[BAT]## bat_cap=59(58), vol=3667, temp=278, ac=0(0), usb=1(1) 500mA, chg=4732
  1501.  
  1502. W/PrintK  (   64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
  1503.  
  1504. V/PrintK  (  216): <7>tty_reopen: pts0 flags a00
  1505.  
  1506. V/PrintK  (  216): <7>opening pts0...
  1507.  
  1508. V/PrintK  (  216): <7>pts0 flags a00
  1509.  
  1510. W/PrintK  (   64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
  1511.  
  1512. W/PrintK  (   64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
  1513.  
  1514. W/PrintK  (   64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
  1515.  
  1516. W/PrintK  (   64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
  1517.  
  1518. W/PrintK  (   64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
  1519.  
  1520. D/PrintK  (    5): <6>[BAT]## bat_cap=58(57), vol=3665, temp=285, ac=0(0), usb=1(1) 500mA, chg=4742
  1521.  
  1522. W/PrintK  (   64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
  1523.  
  1524. W/PrintK  (   64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
  1525.  
  1526. W/PrintK  (   64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
  1527.  
  1528. W/PrintK  (   64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
  1529.  
  1530. W/PrintK  (   64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top