Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
- Home page is http://smartmontools.sourceforge.net/
- === START OF INFORMATION SECTION ===
- Device Model: KINGSTON SUV400S37120G
- Serial Number: 50026B767603D5AC
- Firmware Version: 0C3J96R9
- User Capacity: 120.034.123.776 bytes
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: 11
- ATA Standard is: Not recognized. Minor revision code: 0x28
- Local Time is: Tue May 22 12:17:01 2018 CDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- See vendor-specific Attribute list for marginal Attributes.
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 5) seconds.
- Offline data collection
- capabilities: (0x71) SMART execute Offline immediate.
- No Auto Offline data collection support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 5) minutes.
- Conveyance self-test routine
- recommended polling time: ( 0) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 48
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 157847
- 5 Reallocated_Sector_Ct 0x0033 098 098 010 Pre-fail Always - 18
- 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 6632
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 96
- 100 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 225505408
- 101 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 66456992
- 170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 18
- 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 56
- 175 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- 176 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- 177 Unknown_Attribute 0x0032 197 000 000 Old_age Always In_the_past 132963
- 178 Unknown_Attribute 0x0002 100 100 000 Old_age Always - 8
- 180 Unknown_Attribute 0x0002 100 100 000 Old_age Always - 646
- 183 Unknown_Attribute 0x0032 112 000 000 Old_age Always In_the_past 3106
- 187 Reported_Uncorrect 0x0033 100 100 000 Pre-fail Always - 74
- 194 Temperature_Celsius 0x0022 043 100 000 Old_age Always - 43 (Lifetime Min/Max 23/44)
- 195 Hardware_ECC_Recovered 0x0032 100 100 000 Old_age Always - 157847
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 18
- 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
- 199 UDMA_CRC_Error_Count 0x0012 100 100 000 Old_age Always - 0
- 201 Soft_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 22
- 204 Shock_Count_Write_Opern 0x0032 100 100 000 Old_age Always - 157773
- 231 Temperature_Celsius 0x0032 000 000 000 Old_age Always FAILING_NOW 100
- 233 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 434872
- 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 388313
- 241 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 394824
- 242 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 748207
- 250 Read_Error_Retry_Rate 0x0032 100 100 000 Old_age Always - 256807
- SMART Error Log Version: 0
- ATA Error Count: 14136 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 14136 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 b1 1c 41 e6 Error: UNC 8 sectors at LBA = 0x06411cb1 = 104930481
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 b1 1c 41 e6 00 00:23:42.208 READ DMA
- Error 14135 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 b1 1c 41 e6 Error: UNC 8 sectors at LBA = 0x06411cb1 = 104930481
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 b1 1c 41 e6 00 00:23:42.194 READ DMA
- Error 14134 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 b1 1c 41 e6 Error: UNC 8 sectors at LBA = 0x06411cb1 = 104930481
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 b1 1c 41 e6 00 00:23:42.185 READ DMA
- Error 14133 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 b1 1c 41 e6 Error: UNC 8 sectors at LBA = 0x06411cb1 = 104930481
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 b1 1c 41 e6 00 00:23:42.157 READ DMA
- Error 14132 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 b1 1c 41 e6 Error: UNC 8 sectors at LBA = 0x06411cb1 = 104930481
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 b1 1c 41 e6 00 00:23:42.139 READ DMA
- SMART Self-test log structure revision number 0
- Warning: ATA Specification requires self-test log structure revision number = 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
- SMART Selective self-test log data structure revision number 0
- Warning: ATA Specification requires selective self-test log data structure revision number = 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement