Advertisement
Guest User

Untitled

a guest
Feb 13th, 2023
132
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 40.60 KB | None | 0 0
  1. [ OK ] Reached target System Shutdown.
  2. [ OK ] Reached target Late Shutdown Services.
  3. [ OK ] Finished System Reboot.
  4. [ OK ] Reached target System Reboot.
  5. [ 111.817003] watchdog: watchdog0: watchdog did not stop!
  6. [ 112.411801] watchdog: watchdog0: watchdog did not stop!
  7. [ 112.780759] watchdog: watchdog0: watchdog did not stop!
  8. [ 112.907374] reboot: Restarting system
  9. bl31 reboot reason: 0xd
  10. bl31 reboot reason: 0x0
  11. system cmd 1.
  12. GXL:BL1:9ac50e:bb16dc;FEAT:ADFC318C:0;POC:0;RCY:0;USB:0;SPI:0;CHK:A7;EMMC:400;NAND:81;SD:0;READ:0;0.0;CHK:0;
  13. no sdio debug board detected
  14. TE: 2461369
  15.  
  16. BL2 Built : 15:21:18, Aug 28 2019. gxl g1bf2b53 - luan.yuan@droid15-sz
  17.  
  18. set vcck to 1120 mv
  19. set vddee to 1000 mv
  20. Board ID = 3
  21. CPU clk: 1200MHz
  22. DQS-corr enabled
  23. DDR scramble enabled
  24. DDR3 chl: Rank0+1 @ 912MHz
  25. bist_test rank: 0 1a 01 33 2d 14 46 19 00 32 32 18 4c 19 00 33 2f 16 48 19 00 33 2e 13 49 693 rank: 1 19 04 2f 2b 15 42 17 00 2f 31 17 4b 18 02 2e 2e 18 45 1b 05 31 2e 13 49 693 - PASS
  26.  
  27. Rank0: 1024MB(auto)-2T-13
  28.  
  29. Rank1: 1024MB(auto)-2T-13
  30. AddrBus test pass!
  31. Load fip header from SD, src: 0x0000c200, des: 0x01400000, size: 0x00004000, part: 0
  32. New fip structure!
  33. Load bl30 from SD, src: 0x00010200, des: 0x013c0000, size: 0x0000d600, part: 0
  34. Load bl31 from SD, src: 0x00020200, des: 0x05100000, size: 0x0002b400, part: 0
  35. Load bl33 from SD, src: 0x0004c200, des: 0x01000000, size: 0x00096a00, part: 0
  36. NOTICE: BL3-1: v1.0(release):53f813e
  37. NOTICE: BL3-1: Built : 15:51:23, May 22 2019
  38. [BL31]: GXL CPU setup!
  39. NOTICE: BL3-1: GXL normal boot!
  40. NOTICE: BL3-1: BL33 decompress pass
  41. mpu_config_enable:system pre init ok
  42. dmc sec lock
  43. [Image: gxl_v1.1.3390-6ac5299 2019-09-26 14:09:24 luan.yuan@droid15-sz]
  44. OPS=0x84
  45. 21 0d 84 00 ef fb 99 3c a1 0e 08 1a e2 cc a3 e5
  46. [3.093592 Inits done]
  47. secure task start!
  48. high task start!
  49. low task start!
  50. ERROR: Error initializing runtime service opteed_fast
  51.  
  52. <debug_uart>
  53.  
  54.  
  55. U-Boot 2022.07+ (Nov 20 2022 - 18:31:28 -0500) Libre Computer Board AML-S905X-CC
  56.  
  57. Model: Libre Computer AML-S905X-CC
  58. SoC: Amlogic Meson GXL (S905X) Revision 21:d (84:2)
  59. DRAM: 2 GiB
  60. Core: 177 devices, 29 uclasses, devicetree: separate
  61. WDT: Not starting watchdog@98d0
  62. MMC: mmc@72000: 1, mmc@74000: 0
  63. Loading Environment from FAT... ** Bad device specification mmc 0 **
  64. ** Bad device specification mmc 0 **
  65. Couldn't find partition mmc 0:1
  66. Error: could not access storage.
  67. In: serial
  68. Out: serial
  69. Err: serial
  70. [BL31]: tee size: 0
  71. Net: Fast Ethernet
  72. [BL31]: tee size: 0
  73. Net: No ethernet found.
  74. starting USB...
  75. Bus usb@c9000000: dwc3_meson_gxl_get_phys: usb2 ports: 2
  76. Register 2000140 NbrPorts 2
  77. Starting the controller
  78. USB XHCI 1.00
  79. scanning bus usb@c9000000 for devices... 4 USB Device(s) found
  80. scanning usb for storage devices... 0 Storage Device(s) found
  81. Hit any key to stop autoboot: 0
  82. switch to partitions #0, OK
  83. mmc1 is current device
  84. Scanning mmc 1:1...
  85. ** Unable to read file ubootefi.var **
  86. Failed to load EFI variables
  87. BootOrder not defined
  88. EFI boot manager: Cannot load any image
  89. Found EFI removable media binary efi/boot/bootaa64.efi
  90. 1890184 bytes read in 85 ms (21.2 MiB/s)
  91. Booting /efi\boot\bootaa64.efi
  92. EFI stub: Booting Linux Kernel...
  93. EFI stub: Using DTB from configuration table
  94. EFI stub: Exiting boot services...
  95. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  96. [ 0.000000] Linux version 6.0.12-00858-gb98721ea4575 (autobuild@deb.libre.computer) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP PREEMPT_DYNAMIC Thu Dec 8 19:08:19 UTC 2022
  97. [ 0.000000] Machine model: Libre Computer AML-S905X-CC
  98. [ 0.000000] efi: EFI v2.90 by Das U-Boot
  99. [ 0.000000] efi: ESRT=0x7ae51040 RTPROP=0x7ae53040 SMBIOS=0x7ae55000 RNG=0x57f8c040 MEMRESERVE=0x57f8b040
  100. [ 0.000000] efi: seeding entropy pool
  101. [ 0.000000] random: crng init done
  102. [ 0.000000] esrt: Reserving ESRT space from 0x000000007ae51040 to 0x000000007ae51078.
  103. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000006ac00000, size 256 MiB
  104. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  105. [ 0.000000] Zone ranges:
  106. [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff]
  107. [ 0.000000] DMA32 empty
  108. [ 0.000000] Normal empty
  109. [ 0.000000] Movable zone start for each node
  110. [ 0.000000] Early memory node ranges
  111. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000ffffff]
  112. [ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
  113. [ 0.000000] node 0: [mem 0x0000000005000000-0x00000000072fffff]
  114. [ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff]
  115. [ 0.000000] node 0: [mem 0x0000000010000000-0x00000000101fffff]
  116. [ 0.000000] node 0: [mem 0x0000000010200000-0x000000007ae52fff]
  117. [ 0.000000] node 0: [mem 0x000000007ae53000-0x000000007ae53fff]
  118. [ 0.000000] node 0: [mem 0x000000007ae54000-0x000000007ae54fff]
  119. [ 0.000000] node 0: [mem 0x000000007ae55000-0x000000007ae57fff]
  120. [ 0.000000] node 0: [mem 0x000000007ae58000-0x000000007ae58fff]
  121. [ 0.000000] node 0: [mem 0x000000007ae59000-0x000000007ae5cfff]
  122. [ 0.000000] node 0: [mem 0x000000007ae5d000-0x000000007de7ffff]
  123. [ 0.000000] node 0: [mem 0x000000007de80000-0x000000007de8ffff]
  124. [ 0.000000] node 0: [mem 0x000000007de90000-0x000000007f806fff]
  125. [ 0.000000] node 0: [mem 0x000000007f807000-0x000000007fffffff]
  126. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
  127. [ 0.000000] psci: probing for conduit method from DT.
  128. [ 0.000000] psci: PSCIv0.2 detected in firmware.
  129. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  130. [ 0.000000] psci: Trusted OS migration not required
  131. [ 0.000000] percpu: Embedded 20 pages/cpu s43176 r8192 d30552 u81920
  132. [ 0.000000] Detected VIPT I-cache on CPU0
  133. [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
  134. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  135. [ 0.000000] CPU features: detected: ARM erratum 845719
  136. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
  137. [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.0.12-00858-gb98721ea4575 root=UUID=672a0911-0909-4a3e-bb4a-772b26b8b543 ro noquiet splash vt.handoff=7
  138. [ 0.000000] Unknown kernel command line parameters "noquiet splash BOOT_IMAGE=/boot/vmlinuz-6.0.12-00858-gb98721ea4575", will be passed to user space.
  139. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  140. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  141. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  142. [ 0.000000] Memory: 1677636K/2097152K available (14784K kernel code, 1952K rwdata, 6028K rodata, 3712K init, 505K bss, 157372K reserved, 262144K cma-reserved)
  143. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  144. [ 0.000000] Dynamic Preempt: full
  145. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  146. [ 0.000000] rcu: RCU event tracing is enabled.
  147. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  148. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  149. [ 0.000000] Tracing variant of Tasks RCU enabled.
  150. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  151. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  152. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  153. [ 0.000000] Root IRQ handler: gic_handle_irq
  154. [ 0.000000] GIC: Using split EOI/Deactivate mode
  155. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  156. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  157. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  158. [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  159. [ 0.000639] Console: colour dummy device 80x25
  160. [ 0.001156] printk: console [tty0] enabled
  161. [ 0.001198] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  162. [ 0.001224] pid_max: default: 32768 minimum: 301
  163. [ 0.001289] LSM: Security Framework initializing
  164. [ 0.001315] Yama: becoming mindful.
  165. [ 0.001434] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  166. [ 0.001462] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
  167. [ 0.002779] cblist_init_generic: Setting adjustable number of callback queues.
  168. [ 0.002821] cblist_init_generic: Setting shift to 2 and lim to 1.
  169. [ 0.002892] cblist_init_generic: Setting shift to 2 and lim to 1.
  170. [ 0.003030] rcu: Hierarchical SRCU implementation.
  171. [ 0.003044] rcu: Max phase no-delay instances is 1000.
  172. [ 0.004269] Remapping and enabling EFI services.
  173. [ 0.004623] smp: Bringing up secondary CPUs ...
  174. [ 0.005149] Detected VIPT I-cache on CPU1
  175. [ 0.005280] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  176. [ 0.005883] Detected VIPT I-cache on CPU2
  177. [ 0.006001] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  178. [ 0.006570] Detected VIPT I-cache on CPU3
  179. [ 0.006686] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  180. [ 0.006774] smp: Brought up 1 node, 4 CPUs
  181. [ 0.006842] SMP: Total of 4 processors activated.
  182. [ 0.006855] CPU features: detected: 32-bit EL0 Support
  183. [ 0.006865] CPU features: detected: 32-bit EL1 Support
  184. [ 0.006879] CPU features: detected: CRC32 instructions
  185. [ 0.007349] CPU: All CPU(s) started at EL2
  186. [ 0.007386] alternatives: patching kernel code
  187. [ 0.008789] devtmpfs: initialized
  188. [ 0.014245] Registered cp15_barrier emulation handler
  189. [ 0.014286] Registered setend emulation handler
  190. [ 0.014466] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  191. [ 0.014499] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  192. [ 0.021419] pinctrl core: initialized pinctrl subsystem
  193. [ 0.021969] SMBIOS 3.0 present.
  194. [ 0.022001] DMI: libre-computer aml-s905x-cc/aml-s905x-cc, BIOS 2022.07+ 07/01/2022
  195. [ 0.022442] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  196. [ 0.023519] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
  197. [ 0.023815] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  198. [ 0.023977] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  199. [ 0.024070] audit: initializing netlink subsys (disabled)
  200. [ 0.024275] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
  201. [ 0.025504] thermal_sys: Registered thermal governor 'fair_share'
  202. [ 0.025520] thermal_sys: Registered thermal governor 'step_wise'
  203. [ 0.025540] thermal_sys: Registered thermal governor 'power_allocator'
  204. [ 0.025806] cpuidle: using governor menu
  205. [ 0.025991] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  206. [ 0.026101] ASID allocator initialised with 32768 entries
  207. [ 0.038334] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu
  208. [ 0.039622] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu
  209. [ 0.040058] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx
  210. [ 0.042216] KASLR enabled
  211. [ 0.049052] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  212. [ 0.049087] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
  213. [ 0.049103] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
  214. [ 0.049116] HugeTLB: 508 KiB vmemmap can be freed for a 32.0 MiB page
  215. [ 0.049130] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
  216. [ 0.049142] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
  217. [ 0.049157] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
  218. [ 0.049169] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
  219. [ 0.116582] raid6: neonx8 gen() 2139 MB/s
  220. [ 0.184663] raid6: neonx4 gen() 2198 MB/s
  221. [ 0.252739] raid6: neonx2 gen() 2085 MB/s
  222. [ 0.320813] raid6: neonx1 gen() 1815 MB/s
  223. [ 0.388877] raid6: int64x8 gen() 1490 MB/s
  224. [ 0.456943] raid6: int64x4 gen() 1664 MB/s
  225. [ 0.525017] raid6: int64x2 gen() 1419 MB/s
  226. [ 0.593105] raid6: int64x1 gen() 1051 MB/s
  227. [ 0.593118] raid6: using algorithm neonx4 gen() 2198 MB/s
  228. [ 0.661152] raid6: .... xor() 1577 MB/s, rmw enabled
  229. [ 0.661165] raid6: using neon recovery algorithm
  230. [ 0.661363] fbcon: Taking over console
  231. [ 0.662736] iommu: Default domain type: Passthrough
  232. [ 0.663084] SCSI subsystem initialized
  233. [ 0.663467] usbcore: registered new interface driver usbfs
  234. [ 0.663516] usbcore: registered new interface driver hub
  235. [ 0.663556] usbcore: registered new device driver usb
  236. [ 0.663823] pps_core: LinuxPPS API ver. 1 registered
  237. [ 0.663836] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  238. [ 0.663862] PTP clock support registered
  239. [ 0.663990] EDAC MC: Ver: 3.0.0
  240. [ 0.664510] Registered efivars operations
  241. [ 0.664880] FPGA manager framework
  242. [ 0.664986] Advanced Linux Sound Architecture Driver Initialized.
  243. [ 0.665600] NetLabel: Initializing
  244. [ 0.665617] NetLabel: domain hash size = 128
  245. [ 0.665628] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  246. [ 0.665688] NetLabel: unlabeled traffic allowed by default
  247. [ 0.666141] clocksource: Switched to clocksource arch_sys_counter
  248. [ 0.666369] VFS: Disk quotas dquot_6.6.0
  249. [ 0.666420] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  250. [ 0.671808] NET: Registered PF_INET protocol family
  251. [ 0.671984] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
  252. [ 0.673637] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
  253. [ 0.673732] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  254. [ 0.673760] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
  255. [ 0.673886] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
  256. [ 0.674095] TCP: Hash tables configured (established 16384 bind 16384)
  257. [ 0.674355] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
  258. [ 0.674448] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  259. [ 0.674502] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
  260. [ 0.674670] NET: Registered PF_UNIX/PF_LOCAL protocol family
  261. [ 0.675103] RPC: Registered named UNIX socket transport module.
  262. [ 0.675135] RPC: Registered udp transport module.
  263. [ 0.675145] RPC: Registered tcp transport module.
  264. [ 0.675156] RPC: Registered tcp NFSv4.1 backchannel transport module.
  265. [ 0.675173] NET: Registered PF_XDP protocol family
  266. [ 0.675194] PCI: CLS 0 bytes, default 64
  267. [ 0.675393] Trying to unpack rootfs image as initramfs...
  268. [ 0.686923] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  269. [ 0.687497] kvm [1]: IPA Size Limit: 40 bits
  270. [ 0.688773] kvm [1]: vgic interrupt IRQ9
  271. [ 0.688911] kvm [1]: Hyp mode initialized successfully
  272. [ 0.690488] Initialise system trusted keyrings
  273. [ 0.690750] workingset: timestamp_bits=46 max_order=19 bucket_order=0
  274. [ 0.696597] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  275. [ 0.697262] NFS: Registering the id_resolver key type
  276. [ 0.697321] Key type id_resolver registered
  277. [ 0.697334] Key type id_legacy registered
  278. [ 0.697422] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  279. [ 0.697440] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  280. [ 0.697626] SGI XFS with ACLs, security attributes, no debug enabled
  281. [ 0.699040] 9p: Installing v9fs 9p2000 file system support
  282. [ 0.735647] xor: measuring software checksum speed
  283. [ 0.739749] 8regs : 2442 MB/sec
  284. [ 0.743717] 32regs : 2522 MB/sec
  285. [ 0.747888] arm64_neon : 2406 MB/sec
  286. [ 0.747924] xor: using function: 32regs (2522 MB/sec)
  287. [ 0.747948] Key type asymmetric registered
  288. [ 0.747961] Asymmetric key parser 'x509' registered
  289. [ 0.947992] Freeing initrd memory: 27116K
  290. [ 0.961421] alg: self-tests for CTR-KDF (hmac(sha256)) passed
  291. [ 0.961535] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  292. [ 0.961652] io scheduler mq-deadline registered
  293. [ 0.961669] io scheduler kyber registered
  294. [ 0.961720] io scheduler bfq registered
  295. [ 0.962552] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
  296. [ 0.978225] soc soc0: Amlogic Meson GXL (S905X) Revision 21:d (84:2) Detected
  297. [ 0.982563] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  298. [ 0.990436] loop: module loaded
  299. [ 0.994653] tun: Universal TUN/TAP device driver, 1.6
  300. [ 0.995629] VFIO - User Level meta-driver version: 0.3
  301. [ 0.996762] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  302. [ 0.996798] ehci-pci: EHCI PCI platform driver
  303. [ 0.996846] ehci-platform: EHCI generic platform driver
  304. [ 0.996967] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  305. [ 0.997004] ohci-pci: OHCI PCI platform driver
  306. [ 0.997045] ohci-platform: OHCI generic platform driver
  307. [ 0.997417] usbcore: registered new interface driver usb-storage
  308. [ 0.998111] i2c_dev: i2c /dev entries driver
  309. [ 1.001864] sdhci: Secure Digital Host Controller Interface driver
  310. [ 1.001897] sdhci: Copyright(c) Pierre Ossman
  311. [ 1.002321] Synopsys Designware Multimedia Card Interface Driver
  312. [ 1.002852] sdhci-pltfm: SDHCI platform and OF driver helper
  313. [ 1.003823] ledtrig-cpu: registered to indicate activity on CPUs
  314. [ 1.004785] meson-sm: secure-monitor enabled
  315. [ 1.005362] hid: raw HID events driver (C) Jiri Kosina
  316. [ 1.005488] usbcore: registered new interface driver usbhid
  317. [ 1.005503] usbhid: USB HID core driver
  318. [ 1.005869] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
  319. [ 1.009615] NET: Registered PF_PACKET protocol family
  320. [ 1.009952] 9pnet: Installing 9P2000 support
  321. [ 1.010044] Key type dns_resolver registered
  322. [ 1.010504] registered taskstats version 1
  323. [ 1.010539] Loading compiled-in X.509 certificates
  324. [ 1.012841] zswap: loaded using pool zstd/z3fold
  325. [ 1.014002] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no
  326. [ 1.033623] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart
  327. [ 2.351960] printk: console [ttyAML0] enabled
  328. [ 2.361561] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
  329. [ 2.362357] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
  330. domain-0 init dvfs: 4
  331. [ 2.384832] dwc3-meson-g12a d0078080.usb: USB2 ports: 2
  332. [ 2.384871] dwc3-meson-g12a d0078080.usb: USB3 ports: 0
  333. [ 2.400847] meson-gx-mmc d0074000.mmc: no support for card's volts
  334. [ 2.401394] mmc0: error -22 whilst initialising SDIO card
  335. [ 2.913268] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
  336. [ 2.914955] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
  337. [ 2.923253] dwc2 c9100000.usb: Controller does not support host mode.
  338. [ 2.928274] dwc2: probe of c9100000.usb failed with error -22
  339. [ 2.937564] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  340. [ 2.939424] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  341. [ 2.947097] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports
  342. [ 2.952900] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
  343. [ 2.962263] xhci-hcd xhci-hcd.0.auto: irq 25, io mem 0xc9000000
  344. [ 2.968393] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.00
  345. [ 2.976289] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  346. [ 2.983437] usb usb1: Product: xHCI Host Controller
  347. [ 2.988252] usb usb1: Manufacturer: Linux 6.0.12-00858-gb98721ea4575 xhci-hcd
  348. [ 2.995329] usb usb1: SerialNumber: xhci-hcd.0.auto
  349. [ 3.000624] hub 1-0:1.0: USB hub found
  350. [ 3.003904] hub 1-0:1.0: 2 ports detected
  351. [ 3.010467] meson-gx-mmc d0072000.mmc: Got CD GPIO
  352. [ 3.010983] of_cfs_init
  353. [ 3.015092] of_cfs_init: OK
  354. [ 3.017976] ALSA device list:
  355. [ 3.020702] No soundcards found.
  356. [ 3.042690] Freeing unused kernel memory: 3712K
  357. [ 3.042898] Run /init as init process
  358. Loading, please wait...
  359. Starting version 251.4-1ubuntu7
  360. [ 3.155500] mmc1: new ultra high speed SDR50 SDXC card at address aaaa
  361. [ 3.157116] mmcblk1: mmc1:aaaa SN64G 59.5 GiB
  362. [ 3.164856] mmcblk1: p1 p2
  363. [ 3.262218] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  364. [ 3.311300] BTRFS: device label writable devid 1 transid 448 /dev/mmcblk1p2 scanned by systemd-udevd (165)
  365. [ 3.411802] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
  366. [ 3.414391] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  367. [ 3.423098] usb 1-1: Product: USB2.0 Hub
  368. [ 3.480880] hub 1-1:1.0: USB hub found
  369. [ 3.481313] hub 1-1:1.0: 4 ports detected
  370. [ 3.494633] mmc0: Card stuck being busy! __mmc_poll_for_busy
  371. [ 3.738183] usb 1-2: new full-speed USB device number 3 using xhci-hcd
  372. [ 3.891174] usb 1-2: New USB device found, idVendor=17ef, idProduct=60ee, bcdDevice= 1.27
  373. [ 3.893849] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  374. [ 3.900964] usb 1-2: Product: TrackPoint Keyboard II
  375. [ 3.905974] usb 1-2: Manufacturer: Lenovo
  376. [ 3.933291] input: Lenovo TrackPoint Keyboard II as /devices/platform/soc/d0078080.usb/c9000000.usb/xhci-hcd.0.auto/usb1/1-2/1-2:1.0/0003:17EF:60EE.0001/input/input0
  377. 1;-1fdone.
  378. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  379. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  380. done.
  381. Begin: Will now check root file system ... fsck from util-linux 2.38
  382. [/usr/sbin/fsck.btrfs (1) -- /dev/mmcblk1p2] fsck.btrfs -a /dev/mmcblk1p2
  383. done.
  384. [ 5.832676] BTRFS info (device mmcblk1p2): using crc32c (crc32c-generic) checksum algorithm
  385. [ 5.835563] BTRFS info (device mmcblk1p2): disk space caching is enabled
  386. [ 5.854599] BTRFS info (device mmcblk1p2): enabling ssd optimizations
  387. done.
  388. Begin: Running /scripts/local-bottom ... done.
  389. Begin: Running /scripts/init-bottom ... done.
  390. [ 6.453888] systemd[1]: System time before build time, advancing clock.
  391. [ 6.536668] NET: Registered PF_INET6 protocol family
  392. [ 6.561091] Segment Routing with IPv6
  393. [ 6.561212] RPL Segment Routing with IPv6
  394. [ 6.563268] In-situ OAM (IOAM) with IPv6
  395. [ 6.645136] systemd[1]: systemd 251.4-1ubuntu7 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +)
  396. [ 6.672799] systemd[1]: Detected architecture arm64.
  397.  
  398. Welcome to Ubuntu 22.10!
  399.  
  400. [ 6.682393] systemd[1]: Hostname set to <aml-s905x-cc>.
  401. -.mount
  402. [ 7.479490] systemd[1]: Queued start job for default target Graphical Interface.
  403. [ 7.578609] systemd[1]: Created slice Slice /system/modprobe.
  404. [ 7.581402] systemd[1]: Created slice Slice /system/serial-getty.
  405. 2m [ 7.587937] systemd[1]: Created slice Slice /system/systemd-fsck.
  406. OK [ 7.593554] systemd[1]: Created slice User and Session Slice.
  407. 7.598447] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  408. m] C[ 7.606788] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  409. rea[ 7.615773] systemd[1]: Reached target Local Integrity Protected Volumes.
  410. ted[ 7.622650] systemd[1]: Reached target Slice Units.
  411. sl[ 7.627636] systemd[1]: Reached target Local Verity Protected Volumes.
  412. ice[ 7.634707] systemd[1]: Listening on Device-mapper event daemon FIFOs.
  413. 7.642865] systemd[1]: Listening on LVM2 poll daemon socket.
  414. ;1;3[ 7.648667] systemd[1]: Listening on multipathd control socket.
  415. 9mS[ 7.654954] systemd[1]: Listening on Syslog Socket.
  416. lic[ 7.658900] systemd[1]: Listening on fsck to fsckd communication Socket.
  417. e /[ 7.665572] systemd[1]: Listening on initctl Compatibility Named Pipe.
  418. sys[ 7.672937] systemd[1]: Listening on Journal Audit Socket.
  419. tem[ 7.678305] systemd[1]: Listening on Journal Socket (/dev/log).
  420. /mo[ 7.684478] systemd[1]: Listening on Journal Socket.
  421. dpr[ 7.689768] systemd[1]: Listening on Network Service Netlink Socket.
  422. obe[ 7.697440] systemd[1]: Listening on udev Control Socket.
  423. .
  424. [ OK ] Created[ 7.701657] systemd[1]: Listening on udev Kernel Socket.
  425. slice Slice /system/serial-getty.
  426. [ OK ] Created slice Slice /system/systemd-fsck.
  427. [ OK ] Created slice User and Session Slice.
  428. [ OK ] Started Forward Password R…uests to Wall Directory Watch.
  429. [ OK ] Set up automount Arbitrary…s File System Automount Point.
  430. [ OK ] Reached target Local Integrity Protected Volumes.
  431. [ OK ] Reached target Slice Units.
  432. [ OK ] Reached target Local Veri[ 7.762627] systemd[1]: Mounting Huge Pages File System...
  433. ty Protected Volumes.
  434. [ OK ] Listening on Device-mapper[ 7.773979] systemd[1]: Mounting POSIX Message Queue File System...
  435. event daemon FIFOs.
  436. [ 7.789707] systemd[1]: Mounting Kernel Debug File System...
  437.  
  438. [ OK ] Listening on multipathd control socket.
  439. [ OK [ 7.798771] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
  440. ] Listening on Syslog Socket.
  441. [ OK ] Listening on 7.821053] systemd[1]: Starting Journal Service...
  442. 39mfsck to fsckd communication Socket.
  443. [ 7.838616] systemd[1]: Starting Set the console keyboard layout...
  444.  
  445. [ OK ] Listening on Journal Audit Socket.
  446. [ OK ] Listening on Jou[ 7.853316] systemd[1]: Starting Create List of Static Device Nodes...
  447. rnal Socket (/dev/log).
  448. [ OK ] Listening on Journal Socket.
  449. [ OK ] Listenin[ 7.869536] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
  450. g on Network Service Netlink Socket.
  451. [ 7.885068] systemd[1]: LXD - agent was skipped because of a failed condition check (ConditionPathExists=/dev/virtio-ports/org.linuxcontainers.lxd).
  452. [ 7.892965] systemd[1]: Starting Load Kernel Module chromeos_pstore...
  453. ;32m OK ] Listening on udev Control Socket.
  454. [ OK ] Listening on udev Kernel Socket.
  455. Mounting Huge Pages File System...
  456. Mounting PO[ 7.923465] systemd[1]: Starting Load Kernel Module configfs...
  457. SIX Message Queue File System...
  458. Mounting Kernel Debug File System...
  459. Sta[ 7.939808] systemd[1]: Starting Load Kernel Module drm...
  460. rting Journal Service...
  461. Starting Set the console keyboard layout...
  462. Starting Create List [ 7.955908] systemd[1]: Starting Load Kernel Module efi_pstore...
  463. of Static Device Nodes...
  464. Starting Monitoring of LVM…meventd or progress polling...
  465. Sta[ 7.973451] systemd[1]: Starting Load Kernel Module fuse...
  466. rting Load Kernel Module chromeos_pstore...
  467. Starting Load Kernel Module configfs...
  468. St[ 7.991634] systemd[1]: Starting Load Kernel Module pstore_blk...
  469. [ 7.998378] fuse: init (API version 7.36)
  470. arting Load Kernel Module drm...
  471. Starting Load Kernel Modul[ 8.011587] systemd[1]: Starting Load Kernel Module pstore_zone...
  472. e efi_pstore...
  473. Starting Load Kernel Module fuse...
  474. Starting Load Kernel Module pstore_blk...
  475. Starting 8.027252] systemd[1]: Starting Load Kernel Module ramoops...
  476. 0;1;39mLoad Kernel Module pstore_zone...
  477. Starting Load Kernel Module ramoops 8.042001] systemd[1]: OpenVSwitch configuration for cleanup was skipped because of a failed condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
  478. [ 8.042781] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathExists=!/run/initramfs/fsck-root).
  479. [0m...
  480. [ 8.053571] systemd[1]: Starting Load Kernel Modules...
  481. Starting Load Kernel Modules...
  482. [ 8.087684] Asymmetric key parser 'pkcs8' registered
  483. [ 8.092725] systemd[1]: Starting Remount Root and Kernel File Systems...
  484. Starting Remount Root and Kernel File Systems...
  485. [ 8.102514] systemd[1]: Repartition Root Disk was skipped because all trigger condition checks failed.
  486. [ 8.112628] systemd[1]: Starting Coldplug All udev Devices...
  487. Starting Coldplug All udev Devices...
  488. [ 8.134364] BTRFS info (device mmcblk1p2: state M): use zstd compression, level 3
  489. [ 8.136960] systemd[1]: Started Journal Service.
  490. [ OK ] Started Journal Service.
  491. systemd-journald.service
  492. [ OK ] Mounted Huge Pages File System.
  493. [ OK ] Mounted POSIX Message Queue File System.
  494. [ OK ] Mounted Kernel Debug File System.
  495. [ OK ] Finished Create List of Static Device Nodes.
  496. dev-hugepages.mount
  497. [ OK ] Finished Monitoring of LVM… dmeventd or progress polling.
  498. [ OK ] Finished Load Kernel Module chromeos_pstore.
  499. [ OK ] Finished Load Kernel Module configfs.
  500. dev-mqueue.mount
  501. [ OK ] Finished Load Kernel Module drm.
  502. sys-kernel-debug.mount
  503. [ OK ] Finished Load Kernel Module efi_pstore.
  504. [ OK ] Finished Load Kernel Module fuse.
  505. kmod-static-nodes.service
  506. [ OK ] Finished Load Kernel Module pstore_blk.
  507. [ OK ] Finished Load Kernel Module pstore_zone.
  508. [ OK ] Finished Load Kernel Module ramoops.
  509. lvm2-monitor.service
  510. [ OK ] Finished Load Kernel Modules.
  511. [ OK ] Finished Remount Root and Kernel File Systems.
  512. systemd-modules-load.service
  513. systemd-remount-fs.service
  514. Mounting FUSE Control File System...
  515. Mounting Kernel Configuration File System...
  516. Starting Device-Mapper Multipath Device Controller...
  517. Starting Flush Journal to Persistent Storage...
  518. Starting Load/Save Random Seed...
  519. Starting Apply Kernel Variables...
  520. Starting Create System Users...
  521. run-credentials-systemd\x2dsysusers.service.mount
  522. [ OK ] Mounted FUSE Control File System.
  523. [ OK ] Mounted Kernel Configuration File System.
  524. [ 8.346258] alua: device handler registered
  525. sys-fs-fuse-connections.mount
  526. sys-kernel-config.mount
  527. [ 8.356859] systemd-journald[389]: Received client request to flush runtime journal.
  528. [ OK ] Finished Apply Kernel Variables.
  529. systemd-sysctl.service
  530. [ OK ] Finished Load/Save Random Seed.
  531. systemd-random-seed.service
  532. [ OK ] Finished Create System Users.
  533. systemd-sysusers.service
  534. [ OK ] Finished Coldplug All udev Devices.
  535. systemd-udev-trigger.service
  536. Starting Create Static Device Nodes in /dev...
  537. [ OK ] Finished Flush Journal to Persistent Storage.
  538. systemd-journal-flush.service
  539. [ OK ] Finished Create Static Device Nodes in /dev.
  540. systemd-tmpfiles-setup-dev.service
  541. Starting Rule-based Manage…for Device Events and Files...
  542. multipathd.service
  543. [ OK ] Started Device-Mapper Multipath Device Controller.
  544. systemd-udevd.service
  545. [ OK ] Started Rule-based Manager for Device Events and Files.
  546. [ OK ] Found device /dev/ttyAML0.
  547. [ OK ] Found device /dev/disk/by-label/system-boot.
  548. [BL31]: tee size: 0
  549. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
  550. Starting Load Kernel Module chromeos_pstore...
  551. Starting Load Kernel Module efi_pstore...
  552. Starting Load Kernel Module pstore_blk...
  553. Starting Load Kernel Module pstore_zone...
  554. Starting Load Kernel Module ramoops...
  555. [ OK ] Finished Load Kernel Module chromeos_pstore.
  556. [ OK ] Finished Load Kernel Module efi_pstore.
  557. [ OK ] Finished Load Kernel Module pstore_blk.
  558. [ OK ] Finished Load Kernel Module pstore_zone.
  559. [ OK ] Finished Load Kernel Module ramoops.
  560. [ OK ] Finished Set the console keyboard layout.
  561. [ OK ] Reached target Preparation for Local File Systems.
  562. keyboard-setup.service
  563. Mounting Mount unit for core20, revision 1627...
  564. Mounting Mount unit for lxd, revision 23687...
  565. Mounting Mount unit for snapd, revision 17339...
  566. Starting Show Plymouth Boot Screen...
  567. Starting File System Check…v/disk/by-label/system-boot...
  568. [ OK ] Mounted Mount unit for core20, revision 1627.
  569. [ OK ] Mounted Mount unit for lxd, revision 23687.
  570. snap-core20-1627.mount
  571. [ OK ] Mounted Mount unit for snapd, revision 17339.
  572. snap-lxd-23687.mount
  573. snap-snapd-17339.mount
  574. [ OK ] Started File System Check Daemon to report status.
  575. systemd-fsckd.service
  576. [ OK ] Started Show Plymouth Boot Screen.
  577. [ OK ] Started Forward Password R…s to Plymouth Directory Watch.
  578. plymouth-start.service
  579. [ OK ] Reached target Local Encrypted Volumes.
  580. [ OK ] Finished File System Check…dev/disk/by-label/system-boot.
  581. systemd-fsck@dev-disk-by\x2dlabel-system\x2dboot.service
  582. Mounting /boot/efi...
  583. [ OK ] Mounted /boot/efi.
  584. [ OK ] Reached target Local File Systems.
  585. boot-efi.mount
  586. Starting Set console font and keymap...
  587. Starting Create final runt…dir for shutdown pivot root...
  588. Starting Tell Plymouth To Write Out Runtime Data...
  589. Starting Create Volatile Files and Directories...
  590. Starting Uncomplicated firewall...
  591. [ OK ] Finished Create final runt…e dir for shutdown pivot root.
  592. [ OK ] Finished Tell Plymouth To Write Out Runtime Data.
  593. finalrd.service
  594. plymouth-read-write.service
  595. [ OK ] Finished Uncomplicated firewall.
  596. ufw.service
  597. [ OK ] Finished Create Volatile Files and Directories.
  598. systemd-tmpfiles-setup.service
  599. Starting Network Name Resolution...
  600. Starting Network Time Synchronization...
  601. Starting Record System Boot/Shutdown in UTMP...
  602. Starting Initial cloud-init job (pre-networking)...
  603. [ OK ] Finished Record System Boot/Shutdown in UTMP.
  604. systemd-update-utmp.service
  605. Starting Load/Save RF Kill Switch Status...
  606. [ OK ] Started Load/Save RF Kill Switch Status.
  607. systemd-rfkill.service
  608. [ OK ] Started Network Time Synchronization.
  609. [ OK ] Reached target System Time Set.
  610. systemd-timesyncd.service
  611. [ OK ] Started Network Name Resolution.
  612. [ OK ] Reached target Host and Network Name Lookups.
  613. systemd-resolved.service
  614. [ 15.783619] cloud-init[644]: Cloud-init v. 22.3.4-0ubuntu1 running 'init-local' at Tue, 11 Oct 2022 15:54:39 +0000. Up 15.56 seconds.
  615. [ OK ] Finished Initial cloud-init job (pre-networking).
  616. [ OK ] Reached target Preparation for Network.
  617. cloud-init-local.service
  618. Starting Network Configuration...
  619. [ OK ] Started Network Configuration.
  620. systemd-networkd.service
  621. Starting Wait for Network to be Configured...
  622. systemd-networkd-wait-online.service
  623. [ OK ] Finished Wait for Network to be Configured.
  624. Starting Initial cloud-ini… (metadata service crawler)...
  625. [ OK ] Finished Set console font and keymap.
  626. console-setup.service
  627. [ 20.745567] cloud-init[838]: Cloud-init v. 22.3.4-0ubuntu1 running 'init' at Tue, 11 Oct 2022 15:54:44 +0000. Up 20.57 seconds.
  628. [ 20.817427] cloud-init[838]: ci-info: ++++++++++++++++++++++++++++++++Net device info++++++++++++++++++++++++++++++++
  629. [ 20.817889] cloud-init[838]: ci-info: +-----------------+-------+-----------+-----------+-------+-------------------+
  630. [ 20.818363] cloud-init[838]: ci-info: | Device | Up | Address | Mask | Scope | Hw-Address |
  631. [ 20.822408] cloud-init[838]: ci-info: +-----------------+-------+-----------+-----------+-------+-------------------+
  632. [ 20.826749] cloud-init[838]: ci-info: | eth0 | False | . | . | . | c6:10:93:24:9e:b7 |
  633. [ 20.831075] cloud-init[838]: ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | host | . |
  634. [ 20.831477] cloud-init[838]: ci-info: | lo | True | ::1/128 | . | host | . |
  635. [ 20.835613] cloud-init[838]: ci-info: | wlx3c3300306287 | False | . | . | . | 3c:33:00:30:62:87 |
  636. [ 20.840225] cloud-init[838]: ci-info: +-----------------+-------+-----------+-----------+-------+-------------------+
  637. [ 20.844309] cloud-init[838]: ci-info: +++++++++++++++++++Route IPv6 info+++++++++++++++++++
  638. [ 20.848076] cloud-init[838]: ci-info: +-------+-------------+---------+-----------+-------+
  639. [ 20.851673] cloud-init[838]: ci-info: | Route | Destination | Gateway | Interface | Flags |
  640. [ 20.855607] cloud-init[838]: ci-info: +-------+-------------+---------+-----------+-------+
  641. [ 20.859237] cloud-init[838]: ci-info: +-------+-------------+---------+-----------+-------+
  642. [ OK ] Finished Initial cloud-ini…ob (metadata service crawler).
  643. [ OK ] Reached target Cloud-config availability.
  644. cloud-init.service
  645. Activating swap /swapfile...
  646. [ OK ] Activated swap /swapfile.
  647. [ OK ] Reached target Swaps.
  648. [ OK ] Reached target System Initialization.
  649. swapfile.swap
  650. [ OK ] Started Daily apt download activities.
  651. [ OK ] Started Daily apt upgrade and clean activities.
  652. [ OK ] Started Daily dpkg database backup timer.
  653. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.
  654. [ OK ] Started Discard unused blocks once a week.
  655. [ OK ] Started Daily rotation of log files.
  656. [ OK ] Started Daily man-db regeneration.
  657. [ OK ] Started Message of the Day.
  658. [ OK ] Started Daily Cleanup of Temporary Directories.
  659. [ OK ] Started Ubuntu Advantage Timer for running repeated jobs.
  660. [ OK ] Reached target Path Units.
  661. [ OK ] Listening on cloud-init hotplug hook socket.
  662. [ OK ] Listening on D-Bus System Message Bus Socket.
  663. [ OK ] Listening on Open-iSCSI iscsid Socket.
  664. [ OK ] Listening on Socket unix for snap application lxd.daemon.
  665. [ OK ] Listening on Socket unix f…p application lxd.user-daemon.
  666. Starting Socket activation for snappy daemon...
  667. [ OK ] Listening on OpenBSD Secure Shell server socket.
  668. [ OK ] Listening on UUID daemon activation socket.
  669. [ OK ] Listening on Socket activation for snappy daemon.
  670. [ OK ] Reached target Socket Units.
  671. [ OK ] Reached target Basic System.
  672. Starting Save/Restore Sound Card State...
  673. Starting D-Bus System Message Bus...
  674. [ OK ] Started Save initial kernel messages after boot.
  675. dmesg.service
  676. Starting DUN service...
  677. Starting Remove Stale Onli…t4 Metadata Check Snapshots...
  678. Starting Record successful boot for GRUB...
  679. [ OK ] Started irqbalance daemon.
  680. irqbalance.service
  681. Starting Telephony service...
  682. Starting System Logging Service...
  683. [ OK ] Reached target Preparation for Logins.
  684. Starting Snap Daemon...
  685. Starting User Login Management...
  686. [ OK ] Started D-Bus System Message Bus.
  687. dbus.service
  688. Starting WPA supplicant...
  689. [ OK ] Finished Save/Restore Sound Card State.
  690. [ OK ] Reached target Sound Card.
  691. alsa-restore.service
  692. [ OK ] Started DUN service.
  693. dundee.service
  694. [ OK ] Started Telephony service.
  695. ofono.service
  696. Mounting Arbitrary Executable File Formats File System...
  697. [ OK ] Started System Logging Service.
  698. rsyslog.service
  699. [ OK ] Mounted Arbitrary Executable File Formats File System.
  700. proc-sys-fs-binfmt_misc.mount
  701. [ OK ] Finished Record successful boot for GRUB.
  702. Starting GRUB failed boot detection...
  703. [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
  704. [ OK ] Started WPA supplicant.
  705. [ OK ] Reached target Network.
  706. [ OK ] Reached target Network is Online.
  707. wpa_supplicant.service
  708. [ OK ] Started Download data for …ailed at package install time.
  709. [ OK ] Started Check to see wheth…w version of Ubuntu available.
  710. [ OK ] Reached target Timer Units.
  711. [ OK ] Reached target Preparation for Remote File Systems.
  712. [ OK ] Reached target Remote File Systems.
  713. Starting LSB: automatic crash report generation...
  714. [ OK ] Finished Availability of block devices.
  715. blk-availability.service
  716. cron.service
  717. [ OK ] Started Regular background program processing daemon.
  718. Starting Pollinate to seed…udo random number generator...
  719. Starting LSB: rng-tools (Debian variant)...
  720. Starting Service for snap application lxd.activate...
  721. Starting Permit User Sessions...
  722. [ OK ] Finished Permit User Sessions.
  723. systemd-user-sessions.service
  724. [ OK ] Finished GRUB failed boot detection.
  725. [ OK ] Started User Login Management.
  726. systemd-logind.service
  727. [ OK ] Started LSB: automatic crash report generation.
  728. apport.service
  729. Starting Hold until boot process finishes up...
  730. Starting Terminate Plymouth Boot Screen...
  731. [ OK ] Started Unattended Upgrades Shutdown.
  732. unattended-upgrades.service
  733. [ 25.302382] cloud-init[1032]: Cloud-init v. 22.3.4-0ubuntu1 running 'modules:config' at Tue, 11 Oct 2022 15:54:48 +0000. Up 24.96 seconds.
  734.  
  735. Ubuntu 22.10 aml-s905x-cc ttyAML0
  736.  
  737. aml-s905x-cc login: [ 28.215662] cloud-init[1057]: Cloud-init v. 22.3.4-0ubuntu1 running 'modules:final' at Tue, 11 Oct 2022 15:54:51 +0000. Up 27.88 seconds.
  738. [ 28.633025] cloud-init[1057]: Cloud-init v. 22.3.4-0ubuntu1 finished at Tue, 11 Oct 2022 15:54:52 +0000. Datasource DataSourceNoCloud [seed=/dev/mmcblk1p1][dsmode=local]. Up 28.60 seconds
  739.  
  740.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement