SHARE
TWEET

Untitled

a guest Sep 15th, 2019 133 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x517f803c]
  2. [    0.000000] Linux version 5.3.0-rc1_1 (j@gravity) (gcc version 9.1.0 (GCC)) #1 SMP Mon Sep 2 06:51:54 UTC 2019
  3. [    0.000000] Machine model: Lenovo Yoga C630
  4. [    0.000000] earlycon: efifb0 at I/O port 0x0 (options '')
  5. [    0.000000] printk: bootconsole [efifb0] enabled
  6. [    0.000000] printk: debug: ignoring loglevel setting.
  7. [    0.000000] efi: Getting EFI parameters from FDT:
  8. [    0.000000] efi: EFI v2.60 by American Megatrends
  9. [    0.000000] efi:  ACPI 2.0=0xffffd000  ESRT=0xdc612e18  SMBIOS=0xffe09000  MEMATTR=0xdc60f418  RNG=0xe291bc18  MEMRESERVE=0xbb3f7e98
  10. [    0.000000] efi: seeding entropy pool
  11. [    0.000000] esrt: Reserving ESRT space from 0x00000000dc612e18 to 0x00000000dc612e50.
  12. [    0.000000] cma: Reserved 32 MiB at 0x00000000df800000
  13. [    0.000000] NUMA: No NUMA configuration found
  14. [    0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000027c79ffff]
  15. [    0.000000] NUMA: NODE_DATA [mem 0x27b8f4800-0x27b8f5fff]
  16. [    0.000000] Zone ranges:
  17. [    0.000000]   DMA32    [mem 0x0000000080000000-0x00000000ffffffff]
  18. [    0.000000]   Normal   [mem 0x0000000100000000-0x000000027c79ffff]
  19. [    0.000000] Movable zone start for each node
  20. [    0.000000] Early memory node ranges
  21. [    0.000000]   node   0: [mem 0x0000000080000000-0x00000000803fffff]
  22. [    0.000000]   node   0: [mem 0x0000000080400000-0x0000000080d5ffff]
  23. [    0.000000]   node   0: [mem 0x0000000081ac0000-0x00000000856fffff]
  24. [    0.000000]   node   0: [mem 0x0000000085f10000-0x0000000085fbffff]
  25. [    0.000000]   node   0: [mem 0x000000008c517000-0x000000008c5fffff]
  26. [    0.000000]   node   0: [mem 0x0000000097c00000-0x0000000098efffff]
  27. [    0.000000]   node   0: [mem 0x0000000099500000-0x000000009ffcffff]
  28. [    0.000000]   node   0: [mem 0x000000009ffd0000-0x000000009ffd9fff]
  29. [    0.000000]   node   0: [mem 0x000000009ffdd000-0x000000009fffffff]
  30. [    0.000000]   node   0: [mem 0x00000000a0000000-0x00000000e1b39fff]
  31. [    0.000000]   node   0: [mem 0x00000000e1b3a000-0x00000000ffe59fff]
  32. [    0.000000]   node   0: [mem 0x00000000ffe5a000-0x000000027c79ffff]
  33. [    0.000000] Zeroed struct page in unavailable ranges: 502 pages
  34. [    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027c79ffff]
  35. [    0.000000] On node 0 totalpages: 2003158
  36. [    0.000000]   DMA32 zone: 6949 pages used for memmap
  37. [    0.000000]   DMA32 zone: 0 pages reserved
  38. [    0.000000]   DMA32 zone: 444726 pages, LIFO batch:63
  39. [    0.000000]   Normal zone: 24351 pages used for memmap
  40. [    0.000000]   Normal zone: 1558432 pages, LIFO batch:63
  41. [    0.000000] psci: probing for conduit method from DT.
  42. [    0.000000] psci: PSCIv1.1 detected in firmware.
  43. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  44. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  45. [    0.000000] psci: SMC Calling Convention v1.1
  46. [    0.000000] psci: OSI mode supported.
  47. [    0.000000] percpu: Embedded 24 pages/cpu s57640 r8192 d32472 u98304
  48. [    0.000000] pcpu-alloc: s57640 r8192 d32472 u98304 alloc=24*4096
  49. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  50. [    0.000000] Detected VIPT I-cache on CPU0
  51. [    0.000000] CPU features: detected: GIC system register CPU interface
  52. [    0.000000] CPU features: kernel page table isolation forced ON by KASLR
  53. [    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  54. [    0.000000] CPU features: detected: Hardware dirty bit management
  55. [    0.000000] Speculative Store Bypass Disable mitigation not required
  56. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1971858
  57. [    0.000000] Policy zone: Normal
  58. [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinux-5.3.0-rc1_1 root=UUID=c436db96-0e54-42ce-8e4d-f2c65be7784e ro root=PARTUUID=637cbe98-d2db-4ae4-b513-022b30fdcd8f rw earlycon=efifb efi=novamap ignore_loglevel clk_ignore_unused pd_ignore_unused console=tty0
  59. [    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
  60. [    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  61. [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  62. [    0.000000] software IO TLB: mapped [mem 0xd860f000-0xdc60f000] (64MB)
  63. [    0.000000] Memory: 7191616K/8012632K available (11836K kernel code, 1824K rwdata, 6228K rodata, 4992K init, 383K bss, 788248K reserved, 32768K cma-reserved)
  64. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  65. [    0.000000] rcu: Hierarchical RCU implementation.
  66. [    0.000000] rcu:     RCU event tracing is enabled.
  67. [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
  68. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  69. [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
  70. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  71. [    0.000000] GICv3: Distributor has no Range Selector support
  72. [    0.000000] GICv3: no VLPI support, no direct LPI support
  73. [    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
  74. [    0.000000] ITS: No ITS available, not enabling LPIs
  75. [    0.000000] random: get_random_bytes called from start_kernel+0x2f8/0x48c with crng_init=0
  76. [    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
  77. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  78. [    0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  79. [    0.137000] Console: colour dummy device 80x25
  80. [    0.273610] printk: console [tty0] enabled
  81. [    0.410207] printk: bootconsole [efifb0] disabled
  82. [    0.546910] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
  83. [    0.546924] pid_max: default: 32768 minimum: 301
  84. [    0.547000] LSM: Security Framework initializing
  85. [    0.547065] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  86. [    0.547088] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  87. [    0.548432] ASID allocator initialised with 32768 entries
  88. [    0.548499] rcu: Hierarchical SRCU implementation.
  89. [    0.550722] Remapping and enabling EFI services.
  90. [    0.551316] smp: Bringing up secondary CPUs ...
  91. [    0.552852] Detected VIPT I-cache on CPU1
  92. [    0.552893] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
  93. [    0.552953] CPU1: Booted secondary processor 0x0000000100 [0x517f803c]
  94. [    0.554440] Detected VIPT I-cache on CPU2
  95. [    0.554465] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
  96. [    0.554509] CPU2: Booted secondary processor 0x0000000200 [0x517f803c]
  97. [    0.556110] Detected VIPT I-cache on CPU3
  98. [    0.556134] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
  99. [    0.556175] CPU3: Booted secondary processor 0x0000000300 [0x517f803c]
  100. [    0.558398] Detected VIPT I-cache on CPU4
  101. [    0.558425] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
  102. [    0.558467] CPU4: Booted secondary processor 0x0000000400 [0x516f802d]
  103. [    0.560436] Detected VIPT I-cache on CPU5
  104. [    0.560464] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
  105. [    0.560506] CPU5: Booted secondary processor 0x0000000500 [0x516f802d]
  106. [    0.562632] Detected VIPT I-cache on CPU6
  107. [    0.562661] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
  108. [    0.562703] CPU6: Booted secondary processor 0x0000000600 [0x516f802d]
  109. [    0.565024] Detected VIPT I-cache on CPU7
  110. [    0.565055] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
  111. [    0.565097] CPU7: Booted secondary processor 0x0000000700 [0x516f802d]
  112. [    0.565181] smp: Brought up 1 node, 8 CPUs
  113. [    0.565290] SMP: Total of 8 processors activated.
  114. [    0.565298] CPU features: detected: Privileged Access Never
  115. [    0.565305] CPU features: detected: LSE atomic instructions
  116. [    0.565312] CPU features: detected: User Access Override
  117. [    0.565319] CPU features: detected: 32-bit EL0 Support
  118. [    0.565328] CPU features: detected: Common not Private translations
  119. [    0.565336] CPU features: detected: RAS Extension Support
  120. [    0.565344] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  121. [    0.565353] CPU features: detected: CRC32 instructions
  122. [    0.566660] CPU: All CPU(s) started at EL1
  123. [    0.566708] alternatives: patching kernel code
  124. [    0.573077] devtmpfs: initialized
  125. [    0.581109] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  126. [    0.581130] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  127. [    0.581954] pinctrl core: initialized pinctrl subsystem
  128. [    0.583249] SMBIOS 3.0 present.
  129. [    0.583271] DMI: LENOVO 81JL/LNVNB161216, BIOS 9UCN33WW(V2.06) 06/ 4/2019
  130. [    0.583694] NET: Registered protocol family 16
  131. [    0.584233] audit: initializing netlink subsys (disabled)
  132. [    0.584353] audit: type=2000 audit(0.048:1): state=initialized audit_enabled=0 res=1
  133. [    0.585584] cpuidle: using governor menu
  134. [    0.585968] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  135. [    0.586772] DMA: preallocated 256 KiB pool for atomic allocations
  136. [    0.588002] Serial: AMBA PL011 UART driver
  137. [    0.612795] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  138. [    0.612822] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  139. [    0.612832] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  140. [    0.612843] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  141. [    0.614693] cryptd: max_cpu_qlen set to 1000
  142. [    0.618520] ACPI: Interpreter disabled.
  143. [    0.634258] vgaarb: loaded
  144. [    0.634555] SCSI subsystem initialized
  145. [    0.634800] libata version 3.00 loaded.
  146. [    0.635054] usbcore: registered new interface driver usbfs
  147. [    0.635098] usbcore: registered new interface driver hub
  148. [    0.635164] usbcore: registered new device driver usb
  149. [    0.635733] pps_core: LinuxPPS API ver. 1 registered
  150. [    0.635743] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  151. [    0.635768] PTP clock support registered
  152. [    0.635893] EDAC MC: Ver: 3.0.0
  153. [    0.636402] Registered efivars operations
  154. [    0.636449] efivars: get_next_variable: status=8000000000000003
  155. [    0.637123] Advanced Linux Sound Architecture Driver Initialized.
  156. [    0.637502] Bluetooth: Core ver 2.22
  157. [    0.637536] NET: Registered protocol family 31
  158. [    0.637544] Bluetooth: HCI device and connection manager initialized
  159. [    0.637559] Bluetooth: HCI socket layer initialized
  160. [    0.637569] Bluetooth: L2CAP socket layer initialized
  161. [    0.637587] Bluetooth: SCO socket layer initialized
  162. [    0.638078] clocksource: Switched to clocksource arch_sys_counter
  163. [    0.638259] VFS: Disk quotas dquot_6.6.0
  164. [    0.638322] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  165. [    0.638497] pnp: PnP ACPI: disabled
  166. [    0.643637] thermal_sys: Registered thermal governor 'step_wise'
  167. [    0.643641] thermal_sys: Registered thermal governor 'power_allocator'
  168. [    0.645678] NET: Registered protocol family 2
  169. [    0.646029] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
  170. [    0.646156] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
  171. [    0.646501] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
  172. [    0.647426] TCP: Hash tables configured (established 65536 bind 65536)
  173. [    0.647550] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
  174. [    0.647742] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
  175. [    0.648075] NET: Registered protocol family 1
  176. [    0.648482] RPC: Registered named UNIX socket transport module.
  177. [    0.648498] RPC: Registered udp transport module.
  178. [    0.648506] RPC: Registered tcp transport module.
  179. [    0.648513] RPC: Registered tcp NFSv4.1 backchannel transport module.
  180. [    0.648531] PCI: CLS 0 bytes, default 64
  181. [    0.648675] Unpacking initramfs...
  182. [    1.019453] Freeing initrd memory: 10092K
  183. [    1.020648] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  184. [    1.020884] kvm [1]: HYP mode not available
  185. [    1.070905] Initialise system trusted keyrings
  186. [    1.071023] workingset: timestamp_bits=44 max_order=21 bucket_order=0
  187. [    1.075709] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  188. [    1.076212] NFS: Registering the id_resolver key type
  189. [    1.076235] Key type id_resolver registered
  190. [    1.076243] Key type id_legacy registered
  191. [    1.076258] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  192. [    1.076407] 9p: Installing v9fs 9p2000 file system support
  193. [    1.091360] Key type asymmetric registered
  194. [    1.091374] Asymmetric key parser 'x509' registered
  195. [    1.091413] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  196. [    1.091425] io scheduler mq-deadline registered
  197. [    1.091433] io scheduler kyber registered
  198. [    1.099930] EINJ: ACPI disabled.
  199. [    3.166207] smps2: supplied by vph_pwr
  200. [    3.166403] smps3: supplied by vph_pwr
  201. [    3.166433] smps3: Setting 1352000-1352000uV
  202. [    3.166646] smps4: supplied by vph_pwr
  203. [    3.166676] smps4: Setting 1800000-1800000uV
  204. [    3.166861] smps5: supplied by vph_pwr
  205. [    3.166891] smps5: Setting 2040000-2040000uV
  206. [    3.167074] smps7: supplied by vph_pwr
  207. [    3.167112] smps7: Setting 1028000-1028000uV
  208. [    3.167301] ldo1: supplied by smps7
  209. [    3.167329] ldo1: Setting 880000-880000uV
  210. [    3.167655] ldo2: supplied by smps3
  211. [    3.167683] ldo2: Setting 1200000-1200000uV
  212. [    3.168006] ldo3: supplied by smps7
  213. [    3.168142] ldo5: supplied by smps7
  214. [    3.168170] ldo5: Setting 800000-800000uV
  215. [    3.168319] ldo6: supplied by vph_pwr
  216. [    3.168357] ldo6: Setting 1800000-1800000uV
  217. [    3.168505] ldo7: supplied by smps5
  218. [    3.168533] ldo7: Setting 1800000-1800000uV
  219. [    3.168677] ldo8: supplied by smps3
  220. [    3.168835] ldo9: supplied by regulator-dummy
  221. [    3.168986] ldo10: supplied by regulator-dummy
  222. [    3.169111] ldo11: supplied by smps7
  223. [    3.169239] ldo12: supplied by smps5
  224. [    3.169266] ldo12: Setting 1800000-1800000uV
  225. [    3.169445] ldo13: supplied by regulator-dummy
  226. [    3.169571] ldo14: supplied by smps5
  227. [    3.169610] ldo14: Setting 1880000-1880000uV
  228. [    3.169997] ldo15: supplied by smps5
  229. [    3.170161] ldo16: supplied by regulator-dummy
  230. [    3.170296] ldo17: supplied by smps3
  231. [    3.170323] ldo17: Setting 1304000-1304000uV
  232. [    3.170503] ldo18: supplied by regulator-dummy
  233. [    3.170654] ldo19: supplied by regulator-dummy
  234. [    3.170694] ldo19: Setting 3100000-3108000uV
  235. [    3.170879] ldo20: supplied by regulator-dummy
  236. [    3.170910] ldo20: Setting 2960000-2960000uV
  237. [    3.171090] ldo21: supplied by regulator-dummy
  238. [    3.171245] ldo22: supplied by regulator-dummy
  239. [    3.171398] ldo23: supplied by regulator-dummy
  240. [    3.171551] ldo24: supplied by regulator-dummy
  241. [    3.171589] ldo24: Setting 3075000-3083000uV
  242. [    3.171773] ldo25: supplied by regulator-dummy
  243. [    3.171804] ldo25: Setting 3104000-3112000uV
  244. [    3.171968] ldo26: supplied by smps3
  245. [    3.171996] ldo26: Setting 1200000-1208000uV
  246. [    3.172277] ldo28: supplied by regulator-dummy
  247. [    3.172405] lvs1: supplied by smps4
  248. [    3.172532] lvs2: supplied by smps4
  249. [    3.176173] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  250. [    3.177973] SuperH (H)SCI(F) driver initialized
  251. [    3.178359] msm_serial: driver initialized
  252. [    3.178682] 898000.serial: ttyHS0 at MMIO 0x898000 (irq = 124, base_baud = 0) is a MSM
  253. [    3.178884] serial serial0: tty port ttyHS0 registered
  254. [    3.179380] arm-smmu 5040000.iommu: probing hardware configuration...
  255. [    3.179393] arm-smmu 5040000.iommu: SMMUv2 with:
  256. [    3.179431] arm-smmu 5040000.iommu:  stage 1 translation
  257. [    3.179443] arm-smmu 5040000.iommu:  address translation ops
  258. [    3.179454] arm-smmu 5040000.iommu:  non-coherent table walk
  259. [    3.179464] arm-smmu 5040000.iommu:  (IDR0.CTTW overridden by FW configuration)
  260. [    3.179477] arm-smmu 5040000.iommu:  stream matching with 5 register groups
  261. [    3.179504] arm-smmu 5040000.iommu:  5 context banks (0 stage-2 only)
  262. [    3.179531] arm-smmu 5040000.iommu:  Supported page sizes: 0x63315000
  263. [    3.179543] arm-smmu 5040000.iommu:  Stage-1: 48-bit VA -> 36-bit IPA
  264. [    3.180143] arm-smmu 15000000.iommu: option qcom,smmu-500-fw-impl-errata
  265. [    3.180574] arm-smmu 15000000.iommu: probing hardware configuration...
  266. [    3.180586] arm-smmu 15000000.iommu: SMMUv2 with:
  267. [    3.180608] arm-smmu 15000000.iommu:     stage 1 translation
  268. [    3.180620] arm-smmu 15000000.iommu:     non-coherent table walk
  269. [    3.180630] arm-smmu 15000000.iommu:     (IDR0.CTTW overridden by FW configuration)
  270. [    3.180643] arm-smmu 15000000.iommu:     stream matching with 76 register groups
  271. [    3.180670] arm-smmu 15000000.iommu:     45 context banks (0 stage-2 only)
  272. [    3.180691] arm-smmu 15000000.iommu:     Supported page sizes: 0x61311000
  273. [    3.180704] arm-smmu 15000000.iommu:     Stage-1: 48-bit VA -> 48-bit IPA
  274. [    3.180728] arm-smmu 15000000.iommu: Handoff smr: 80080880 s2cr: 0 cb: 0
  275. [    3.180752] arm-smmu 15000000.iommu: Handoff smr: 80080c80 s2cr: 0 cb: 0
  276. [    3.180777] arm-smmu 15000000.iommu: Handoff smr: 800f00a0 s2cr: 1 cb: 1
  277. [    3.180801] arm-smmu 15000000.iommu: Handoff smr: 800f00c0 s2cr: 1 cb: 1
  278. [    3.180826] arm-smmu 15000000.iommu: Handoff smr: 800f00e0 s2cr: 2 cb: 2
  279. [    3.180851] arm-smmu 15000000.iommu: Handoff smr: 800f0100 s2cr: 2 cb: 2
  280. [    3.180875] arm-smmu 15000000.iommu: Handoff smr: 80000740 s2cr: 3 cb: 3
  281. [    3.180900] arm-smmu 15000000.iommu: Handoff smr: 80000760 s2cr: 3 cb: 3
  282. [    3.190948] loop: module loaded
  283. [    3.191927] ufshcd-qcom 1d84000.ufshc: Adding to iommu group 0
  284. [    3.192303] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
  285. [    3.192329] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
  286. [    3.192344] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
  287. [    3.192678] ufshcd-qcom 1d84000.ufshc: ufs_qcom_init: required phy device. hasn't probed yet. err = -517
  288. [    3.192695] ufshcd-qcom 1d84000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
  289. [    3.192774] ufshcd-qcom 1d84000.ufshc: Initialization failed
  290. [    3.242168] ufshcd-qcom 1d84000.ufshc: ufshcd_pltfrm_init() failed -517
  291. [    3.244737] spmi spmi-0: PMIC arbiter version v5 (0x50000000)
  292. [    3.252991] libphy: Fixed MDIO Bus: probed
  293. [    3.253299] tun: Universal TUN/TAP device driver, 1.6
  294. [    3.254127] thunder_xcv, ver 1.0
  295. [    3.254163] thunder_bgx, ver 1.0
  296. [    3.254199] nicpf, ver 1.0
  297. [    3.254616] hclge is initializing
  298. [    3.254626] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
  299. [    3.254635] hns3: Copyright (c) 2017 Huawei Corporation.
  300. [    3.254687] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  301. [    3.254694] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  302. [    3.254730] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
  303. [    3.254739] igb: Copyright (c) 2007-2014 Intel Corporation.
  304. [    3.254771] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  305. [    3.254781] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  306. [    3.255098] sky2: driver version 1.30
  307. [    3.255650] usbcore: registered new interface driver ax88179_178a
  308. [    3.255837] VFIO - User Level meta-driver version: 0.3
  309. [    3.259338] dwc3 a600000.dwc3: Adding to iommu group 1
  310. [    3.259508] dwc3 a600000.dwc3: Failed to get clk 'ref': -2
  311. [    3.262344] dwc3 a800000.dwc3: Adding to iommu group 2
  312. [    3.262499] dwc3 a800000.dwc3: Failed to get clk 'ref': -2
  313. [    3.263328] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  314. [    3.263340] ehci-pci: EHCI PCI platform driver
  315. [    3.263372] ehci-platform: EHCI generic platform driver
  316. [    3.263490] ehci-orion: EHCI orion driver
  317. [    3.263581] ehci-exynos: EHCI EXYNOS driver
  318. [    3.263664] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  319. [    3.263699] ohci-pci: OHCI PCI platform driver
  320. [    3.263733] ohci-platform: OHCI generic platform driver
  321. [    3.263839] ohci-exynos: OHCI EXYNOS driver
  322. [    3.264265] usbcore: registered new interface driver usb-storage
  323. [    3.266952] i2c /dev entries driver
  324. [    3.272725] Bluetooth: HCI UART driver ver 2.3
  325. [    3.272743] Bluetooth: HCI UART protocol H4 registered
  326. [    3.272781] Bluetooth: HCI UART protocol LL registered
  327. [    3.272857] Bluetooth: HCI UART protocol Broadcom registered
  328. [    3.272894] Bluetooth: HCI UART protocol QCA registered
  329. [    3.273892] ldo25: unsupportable voltage range: 3300000-3112000uV
  330. [    3.273908] Bluetooth: failed to enable regulator:vddch0
  331. [    3.274209] Bluetooth: wcn3990 serdev registration failed
  332. [    3.274342] hci_uart_qca: probe of serial0-0 failed with error -22
  333. [    3.277643] sdhci: Secure Digital Host Controller Interface driver
  334. [    3.277656] sdhci: Copyright(c) Pierre Ossman
  335. [    3.278025] Synopsys Designware Multimedia Card Interface Driver
  336. [    3.278844] sdhci-pltfm: SDHCI platform and OF driver helper
  337. [    3.281154] ledtrig-cpu: registered to indicate activity on CPUs
  338. [    3.281583] hidraw: raw HID events driver (C) Jiri Kosina
  339. [    3.281766] usbcore: registered new interface driver usbhid
  340. [    3.281769] usbhid: USB HID core driver
  341. [    3.283635] NET: Registered protocol family 17
  342. [    3.283724] 9pnet: Installing 9P2000 support
  343. [    3.283755] Key type dns_resolver registered
  344. [    3.284436] registered taskstats version 1
  345. [    3.284442] Loading compiled-in X.509 certificates
  346. [    3.288619] SW_EDP_1P2: supplied by ldo2
  347. [    3.289186] qcom-qmp-phy 1d87000.phy: Registered Qcom-QMP phy
  348. [    3.289519] qcom-qmp-phy 88e9000.phy: Registered Qcom-QMP phy
  349. [    3.289761] qcom-qmp-phy 88eb000.phy: Registered Qcom-QMP phy
  350. [    3.289935] qcom-qusb2-phy 88e2000.phy: Registered Qcom-QUSB2 phy
  351. [    3.290106] qcom-qusb2-phy 88e3000.phy: Registered Qcom-QUSB2 phy
  352. [    3.291554] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
  353. [    3.291566] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
  354. [    3.291573] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
  355. [    3.292561] scsi host0: ufshcd
  356. [    3.312050] dwc3 a600000.dwc3: Failed to get clk 'ref': -2
  357. [    3.315175] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  358. [    3.315200] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  359. [    3.315378] xhci-hcd xhci-hcd.0.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000000002010010
  360. [    3.315434] xhci-hcd xhci-hcd.0.auto: irq 130, io mem 0x0a600000
  361. [    3.316691] hub 1-0:1.0: USB hub found
  362. [    3.316721] hub 1-0:1.0: 1 port detected
  363. [    3.316922] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  364. [    3.316938] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  365. [    3.316956] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  366. [    3.317014] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  367. [    3.317611] hub 2-0:1.0: USB hub found
  368. [    3.317639] hub 2-0:1.0: 1 port detected
  369. [    3.318437] dwc3 a800000.dwc3: Failed to get clk 'ref': -2
  370. [    3.320214] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  371. [    3.320228] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
  372. [    3.320352] xhci-hcd xhci-hcd.1.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000000002010010
  373. [    3.320392] xhci-hcd xhci-hcd.1.auto: irq 131, io mem 0x0a800000
  374. [    3.320855] hub 3-0:1.0: USB hub found
  375. [    3.320870] hub 3-0:1.0: 1 port detected
  376. [    3.320964] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  377. [    3.320974] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
  378. [    3.320983] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  379. [    3.321009] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  380. [    3.321169] hub 4-0:1.0: USB hub found
  381. [    3.321180] hub 4-0:1.0: 1 port detected
  382. [    3.321349] PM: genpd: Not disabling unused power domains
  383. [    3.322096] hctosys: unable to open rtc device (rtc0)
  384. [    3.322371] clk: Not disabling unused clocks
  385. [    3.322428] ALSA device list:
  386. [    3.322432]   No soundcards found.
  387. [    3.333903] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
  388. [    3.438070] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
  389. [    3.439007] ufshcd-qcom 1d84000.ufshc: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
  390. [    3.440749] scsi 0:0:0:49488: Well-known LUN    SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
  391. [    3.444247] scsi 0:0:0:49476: Well-known LUN    SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
  392. [    3.446624] scsi 0:0:0:49456: Well-known LUN    SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
  393. [    3.449987] scsi 0:0:0:0: Direct-Access     SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
  394. [    3.452678] sd 0:0:0:0: Power-on or device reset occurred
  395. [    3.453968] scsi 0:0:0:1: Direct-Access     SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
  396. [    3.456144] sd 0:0:0:1: Power-on or device reset occurred
  397. [    3.456340] sd 0:0:0:0: [sda] 29765632 4096-byte logical blocks: (122 GB/114 GiB)
  398. [    3.456722] sd 0:0:0:0: [sda] Write Protect is off
  399. [    3.456756] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
  400. [    3.456857] scsi 0:0:0:2: Direct-Access     SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
  401. [    3.457072] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  402. [    3.457240] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes
  403. [    3.459229] sd 0:0:0:2: Power-on or device reset occurred
  404. [    3.460014] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
  405. [    3.460160] scsi 0:0:0:3: Direct-Access     SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
  406. [    3.460471] sd 0:0:0:1: [sdb] Write Protect is off
  407. [    3.460483] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
  408. [    3.460681] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
  409. [    3.460797] sd 0:0:0:2: [sdc] Write Protect is off
  410. [    3.460814] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
  411. [    3.460985] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
  412. [    3.461015] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
  413. [    3.461113] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes
  414. [    3.461309] sd 0:0:0:3: Power-on or device reset occurred
  415. [    3.461442] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes
  416. [    3.461927] scsi 0:0:0:4: Direct-Access     SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
  417. [    3.462792] sd 0:0:0:4: Power-on or device reset occurred
  418. [    3.463320] scsi 0:0:0:5: Direct-Access     SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
  419. [    3.463519] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 MiB)
  420. [    3.463676] sd 0:0:0:3: [sdd] Write Protect is off
  421. [    3.463685] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
  422. [    3.463752]  sda: sda1 sda2 sda3 sda4 sda5
  423. [    3.463857] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
  424. [    3.463966] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes
  425. [    3.464099] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks: (4.29 GB/4.00 GiB)
  426. [    3.464203] sd 0:0:0:4: [sde] Write Protect is off
  427. [    3.464220] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
  428. [    3.464370] sd 0:0:0:5: Power-on or device reset occurred
  429. [    3.464549] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
  430. [    3.465030] sd 0:0:0:4: [sde] Optimal transfer size 8192 bytes
  431. [    3.465658]  sdc: sdc1 sdc2
  432. [    3.466129] sd 0:0:0:5: [sdf] 393216 4096-byte logical blocks: (1.61 GB/1.50 GiB)
  433. [    3.466287] sd 0:0:0:5: [sdf] Write Protect is off
  434. [    3.466296] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
  435. [    3.466857] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
  436. [    3.466924]  sdb: sdb1 sdb2
  437. [    3.467049] sd 0:0:0:5: [sdf] Optimal transfer size 8192 bytes
  438. [    3.467380]  sdd: sdd2 sdd3
  439. [    3.467641] sd 0:0:0:0: [sda] Attached SCSI disk
  440. [    3.468378]  sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27
  441. [    3.468456] random: fast init done
  442. [    3.468780] sd 0:0:0:2: [sdc] Attached SCSI disk
  443. [    3.469329] sd 0:0:0:1: [sdb] Attached SCSI disk
  444. [    3.469813]  sdf: sdf2 sdf3 sdf4 sdf5
  445. [    3.469876] sd 0:0:0:3: [sdd] Attached SCSI disk
  446. [    3.471685] sd 0:0:0:5: [sdf] Attached SCSI disk
  447. [    3.472968] sd 0:0:0:4: [sde] Attached SCSI disk
  448. [    3.473929] Freeing unused kernel memory: 4992K
  449. [    3.495049] Run /init as init process
  450. [    3.650698] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  451. [    3.654303] usb 3-1: new high-speed USB device number 2 using xhci-hcd
  452. [    3.817108] systemd-udevd[2038]: starting version 3.2.7
  453. [    3.817444] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  454. [    3.817490] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  455. [    3.817530] random: systemd-udevd: uninitialized urandom read (16 bytes read)
  456. [    3.819882] udevd[2040]: starting eudev-3.2.7
  457. [    3.861690] hub 1-1:1.0: USB hub found
  458. [    3.862890] hub 1-1:1.0: 4 ports detected
  459. [    3.865629] hub 3-1:1.0: USB hub found
  460. [    3.865958] hub 3-1:1.0: 3 ports detected
  461. [    3.930269] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
  462. [    3.934644] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
  463. [    3.954657] adreno 5000000.gpu: Adding to iommu group 3
  464. [    3.954978] msm ae00000.mdss: Adding to iommu group 4
  465. [    3.957913] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
  466. [    3.958001] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
  467. [    3.958227] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
  468. [    3.959338] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
  469. [    3.959449] msm ae00000.mdss: master bind failed: -517
  470. [    3.961162] power_supply some-adapter: hwmon: 'some-adapter' is not a valid name attribute, please fix
  471. [    3.961310] power_supply some-battery: hwmon: 'some-battery' is not a valid name attribute, please fix
  472. [    3.961920] i2c_hid 3-0015: 3-0015 supply vdd not found, using dummy regulator
  473. [    3.961960] i2c_hid 3-0015: 3-0015 supply vddl not found, using dummy regulator
  474. [    3.962341] i2c_hid 3-002c: 3-002c supply vdd not found, using dummy regulator
  475. [    3.962371] i2c_hid 3-002c: 3-002c supply vddl not found, using dummy regulator
  476. [    3.964354] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
  477. [    3.964436] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
  478. [    3.964573] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
  479. [    3.964621] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
  480. [    3.964672] msm ae00000.mdss: master bind failed: -517
  481. [    3.967881] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
  482. [    3.967964] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
  483. [    3.968101] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
  484. [    3.968149] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
  485. [    3.968199] msm ae00000.mdss: master bind failed: -517
  486. [    3.971413] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
  487. [    3.971500] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
  488. [    3.971654] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
  489. [    3.971705] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
  490. [    3.971768] msm ae00000.mdss: master bind failed: -517
  491. [    3.975129] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
  492. [    3.975217] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
  493. [    3.975362] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
  494. [    3.975410] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
  495. [    3.975457] msm ae00000.mdss: master bind failed: -517
  496. [    3.978307] hub 4-1:1.0: USB hub found
  497. [    3.978666] hub 4-1:1.0: 2 ports detected
  498. [    3.978897] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
  499. [    3.978972] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
  500. [    3.979105] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
  501. [    3.979154] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
  502. [    3.979203] msm ae00000.mdss: master bind failed: -517
  503. [    3.982414] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
  504. [    3.982500] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
  505. [    3.982648] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
  506. [    3.982697] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
  507. [    3.982745] msm ae00000.mdss: master bind failed: -517
  508. [    3.985734] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
  509. [    3.985817] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
  510. [    3.985962] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
  511. [    3.986011] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
  512. [    3.986082] msm ae00000.mdss: master bind failed: -517
  513. [    3.986335] input: hid-over-i2c 06CB:CD3E Mouse as /devices/platform/soc/8c0000.geniqup/88c000.i2c/i2c-3/3-002c/0018:06CB:CD3E.0001/input/input0
  514. [    3.986581] input: hid-over-i2c 06CB:CD3E Touchpad as /devices/platform/soc/8c0000.geniqup/88c000.i2c/i2c-3/3-002c/0018:06CB:CD3E.0001/input/input1
  515. [    3.986749] hid-generic 0018:06CB:CD3E.0001: input,hidraw0: I2C HID v1.00 Mouse [hid-over-i2c 06CB:CD3E] on 3-002c
  516. [    3.987370] i2c_hid 5-0010: 5-0010 supply vdd not found, using dummy regulator
  517. [    3.987404] i2c_hid 5-0010: 5-0010 supply vddl not found, using dummy regulator
  518. [    3.988946] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
  519. [    3.989027] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
  520. [    3.989156] dsi_get_config: Invalid version
  521. [    3.989181] msm_dsi_host_init: get config failed
  522. [    3.989215] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -22
  523. [    3.989264] msm ae00000.mdss: master bind failed: -22
  524. [    3.989928] msm: probe of ae00000.mdss failed with error -22
  525. [    4.008802] hub 2-1:1.0: USB hub found
  526. [    4.011425] hub 2-1:1.0: 4 ports detected
  527. [    4.014760] power_supply hid-0018:04F3:279F.0002-battery: hwmon: 'hid-0018:04F3:279F.0002-battery' is not a valid name attribute, please fix
  528. [    4.014927] input: hid-over-i2c 04F3:279F Touchscreen as /devices/platform/soc/8c0000.geniqup/894000.i2c/i2c-5/5-0010/0018:04F3:279F.0002/input/input3
  529. [    4.015087] input: hid-over-i2c 04F3:279F as /devices/platform/soc/8c0000.geniqup/894000.i2c/i2c-5/5-0010/0018:04F3:279F.0002/input/input4
  530. [    4.015209] input: hid-over-i2c 04F3:279F as /devices/platform/soc/8c0000.geniqup/894000.i2c/i2c-5/5-0010/0018:04F3:279F.0002/input/input5
  531. [    4.015839] input: hid-over-i2c 04F3:279F as /devices/platform/soc/8c0000.geniqup/894000.i2c/i2c-5/5-0010/0018:04F3:279F.0002/input/input6
  532. [    4.015995] hid-generic 0018:04F3:279F.0002: input,hidraw1: I2C HID v1.00 Device [hid-over-i2c 04F3:279F] on 5-0010
  533. [    4.017232] i2c_hid 11-005c: 11-005c supply vdd not found, using dummy regulator
  534. [    4.017280] i2c_hid 11-005c: 11-005c supply vddl not found, using dummy regulator
  535. [    4.070565] input: hid-over-i2c 6243:0001 Keyboard as /devices/platform/soc/ac0000.geniqup/a8c000.i2c/i2c-11/11-005c/0018:6243:0001.0003/input/input9
  536. [    4.071362] input: hid-over-i2c 6243:0001 Consumer Control as /devices/platform/soc/ac0000.geniqup/a8c000.i2c/i2c-11/11-005c/0018:6243:0001.0003/input/input10
  537. [    4.071849] input: hid-over-i2c 6243:0001 Wireless Radio Control as /devices/platform/soc/ac0000.geniqup/a8c000.i2c/i2c-11/11-005c/0018:6243:0001.0003/input/input12
  538. [    4.071990] input: hid-over-i2c 6243:0001 as /devices/platform/soc/ac0000.geniqup/a8c000.i2c/i2c-11/11-005c/0018:6243:0001.0003/input/input13
  539. [    4.072500] hid-generic 0018:6243:0001.0003: input,hidraw2: I2C HID v1.00 Keyboard [hid-over-i2c 6243:0001] on 11-005c
  540. [    4.142771] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
  541. [    4.218397] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
  542. [    4.239513] dracut: Checking ext4: /dev/disk/by-partuuid/637cbe98-d2db-4ae4-b513-022b30fdcd8f
  543. [    4.239925] dracut: issuing e2fsck -a  /dev/disk/by-partuuid/637cbe98-d2db-4ae4-b513-022b30fdcd8f
  544. [    4.253944] dracut: Linux: clean, 203154/5120000 files, 4272828/20480000 blocks
  545. [    4.254099] usb 3-1.3: new high-speed USB device number 3 using xhci-hcd
  546. [    4.259293] dracut: Mounting /dev/disk/by-partuuid/637cbe98-d2db-4ae4-b513-022b30fdcd8f with -o defaults,ro,rw
  547. [    4.270110] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
  548. [    4.296104] dracut: Mounted root filesystem /dev/sda5
  549. [    4.329870] usb 1-1.1: not running at top speed; connect to a high speed hub
  550. [    4.410750] usb 2-1.3: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
  551. [    4.425545] dracut: Switching root
  552. [    4.514136] usb 1-1.2: new full-speed USB device number 4 using xhci-hcd
  553. [    4.637096] fuse: init (API version 7.31)
  554. [    4.718510] raid6: neonx8   gen()  6288 MB/s
  555. [    4.725736] usb 2-1.4: new SuperSpeed Gen 1 USB device number 4 using xhci-hcd
  556. [    4.729747] input: C-Media Electronics Inc. USB Advanced Audio Device as /devices/platform/soc/a6f8800.usb/a600000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.3/0003:0D8C:0022.0004/input/input14
  557. [    4.786624] raid6: neonx8   xor()  5436 MB/s
  558. [    4.791382] hid-generic 0003:0D8C:0022.0004: input,hidraw3: USB HID v1.11 Device [C-Media Electronics Inc. USB Advanced Audio Device] on usb-xhci-hcd.0.auto-1.2/input3
  559. [    4.793328] hub 2-1.4:1.0: USB hub found
  560. [    4.795936] hub 2-1.4:1.0: 4 ports detected
  561. [    4.854271] raid6: neonx4   gen()  5989 MB/s
  562. [    4.870594] usb 1-1.4: new high-speed USB device number 5 using xhci-hcd
  563. [    4.922255] raid6: neonx4   xor()  5413 MB/s
  564. [    4.990262] raid6: neonx2   gen()  4709 MB/s
  565. [    5.046445] hub 1-1.4:1.0: USB hub found
  566. [    5.048473] hub 1-1.4:1.0: 4 ports detected
  567. [    5.058530] raid6: neonx2   xor()  4318 MB/s
  568. [    5.126529] raid6: neonx1   gen()  3237 MB/s
  569. [    5.194587] raid6: neonx1   xor()  3069 MB/s
  570. [    5.262496] raid6: int64x8  gen()  2924 MB/s
  571. [    5.330491] raid6: int64x8  xor()  1612 MB/s
  572. [    5.398556] raid6: int64x4  gen()  2986 MB/s
  573. [    5.466562] raid6: int64x4  xor()  1582 MB/s
  574. [    5.534485] raid6: int64x2  gen()  2507 MB/s
  575. [    5.602490] raid6: int64x2  xor()  1329 MB/s
  576. [    5.670541] raid6: int64x1  gen()  2109 MB/s
  577. [    5.738558] raid6: int64x1  xor()  1090 MB/s
  578. [    5.738561] raid6: using algorithm neonx8 gen() 6288 MB/s
  579. [    5.738564] raid6: .... xor() 5436 MB/s, rmw enabled
  580. [    5.738569] raid6: using neon recovery algorithm
  581. [    5.749054] xor: measuring software checksum speed
  582. [    5.786554]    8regs     :  9136.000 MB/sec
  583. [    5.826508]    32regs    :  8062.000 MB/sec
  584. [    5.866516]    arm64_neon:  7293.000 MB/sec
  585. [    5.866520] xor: using function: 8regs (9136.000 MB/sec)
  586. [    5.895362] Btrfs loaded, crc32c=crc32c-generic
  587. [    5.903602] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
  588. [    5.928395] udevd[3736]: starting version 3.2.7
  589. [    5.930143] urandom_read: 5 callbacks suppressed
  590. [    5.930146] random: udevd: uninitialized urandom read (16 bytes read)
  591. [    5.930379] random: udevd: uninitialized urandom read (16 bytes read)
  592. [    5.949516] udevd[3737]: starting eudev-3.2.7
  593. [    6.014587] random: crng init done
  594. [    6.027598] qcom_q6v5_pas remoteproc-adsp: remoteproc-adsp supply cx not found, using dummy regulator
  595. [    6.027655] qcom_q6v5_pas remoteproc-adsp: remoteproc-adsp supply px not found, using dummy regulator
  596. [    6.028320] qcom-q6v5-mss 4080000.remoteproc: failed to acquire pdc reset
  597. [    6.028539] remoteproc remoteproc1: releasing 4080000.remoteproc
  598. [    6.029342] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  599. [    6.033690] NET: Registered protocol family 42
  600. [    6.034150] remoteproc remoteproc0: remoteproc-adsp is available
  601. [    6.034366] qcom_q6v5_pas remoteproc-cdsp: remoteproc-cdsp supply cx not found, using dummy regulator
  602. [    6.034405] qcom_q6v5_pas remoteproc-cdsp: remoteproc-cdsp supply px not found, using dummy regulator
  603. [    6.035450] qcom-q6v5-mss 4080000.remoteproc: failed to acquire pdc reset
  604. [    6.035547] remoteproc remoteproc2: releasing 4080000.remoteproc
  605. [    6.036210] remoteproc remoteproc1: remoteproc-cdsp is available
  606. [    6.037692] qcom-q6v5-mss 4080000.remoteproc: failed to acquire pdc reset
  607. [    6.037774] remoteproc remoteproc2: releasing 4080000.remoteproc
  608. [    6.037895] remoteproc remoteproc1: Direct firmware load for qcom/c630/cdsp.mdt failed with error -2
  609. [    6.037903] remoteproc remoteproc0: Direct firmware load for qcom/c630/adsp.mdt failed with error -2
  610. [    6.037909] remoteproc remoteproc0: powering up remoteproc-adsp
  611. [    6.037910] remoteproc remoteproc1: powering up remoteproc-cdsp
  612. [    6.037925] remoteproc remoteproc1: Direct firmware load for qcom/c630/cdsp.mdt failed with error -2
  613. [    6.037929] remoteproc remoteproc0: Direct firmware load for qcom/c630/adsp.mdt failed with error -2
  614. [    6.037931] remoteproc remoteproc0: request_firmware failed: -2
  615. [    6.037934] remoteproc remoteproc1: request_firmware failed: -2
  616. [    6.038239] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  617. [    6.038304] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  618. [    6.038309] cfg80211: failed to load regulatory.db
  619. [    6.060249] remoteproc remoteproc2: 4080000.remoteproc is available
  620. [    6.075128] ath10k_snoc 18800000.wifi: Adding to iommu group 5
  621. [    6.112680] usbcore: registered new interface driver r8152
  622. [    6.115963] mc: Linux media interface: v0.10
  623. [    6.116050] usbcore: registered new interface driver cdc_ether
  624. [    6.126015] videodev: Linux video capture interface: v2.00
  625. [    6.143150] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:2115)
  626. [    6.161447] uvcvideo 3-1.3:1.0: Entity type for entity Extension 4 was not initialized!
  627. [    6.161467] uvcvideo 3-1.3:1.0: Entity type for entity Extension 3 was not initialized!
  628. [    6.161474] uvcvideo 3-1.3:1.0: Entity type for entity Processing 2 was not initialized!
  629. [    6.161481] uvcvideo 3-1.3:1.0: Entity type for entity Camera 1 was not initialized!
  630. [    6.161644] input: Integrated Camera: Integrated C as /devices/platform/soc/a8f8800.usb/a800000.dwc3/xhci-hcd.1.auto/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
  631. [    6.161822] usbcore: registered new interface driver uvcvideo
  632. [    6.161828] USB Video Class driver (1.1.1)
  633. [    6.245976] usb 2-1.3: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
  634. [    6.256028] EXT4-fs (sda5): re-mounted. Opts: stripe=2
  635. [    6.329569] r8152 2-1.3:1.0 eth0: v1.09.10
  636. [    6.525772] EXT4-fs (sda5): re-mounted. Opts: stripe=2
  637. [    7.624151] udevd[5262]: starting version 3.2.7
  638. [    7.634776] udevd[5262]: starting eudev-3.2.7
  639. [    7.663383] 8021q: 802.1Q VLAN Support v1.8
  640. [    7.683084] NET: Registered protocol family 10
  641. [    7.683840] Segment Routing with IPv6
  642. [    9.274195] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  643. [    9.275512] r8152 2-1.3:1.0 eth0: carrier on
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top