API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 7th, 2018
578
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 23.13 KB
Copied copy raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 4.4.92 (buildbot@debian8) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3557-a5e1f7f) ) #0 SMP Mon Oct 16 22:57:05 2017
  3. [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
  4. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  5. [ 0.000000] Machine model: TP-Link Archer C2600
  6. [ 0.000000] Memory policy: Data cache writealloc
  7. [ 0.000000] On node 0 totalpages: 122880
  8. [ 0.000000] free_area_init_node: node 0, pgdat c070d480, node_mem_map ddc39000
  9. [ 0.000000] Normal zone: 960 pages used for memmap
  10. [ 0.000000] Normal zone: 0 pages reserved
  11. [ 0.000000] Normal zone: 122880 pages, LIFO batch:31
  12. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ddc0d000 s13824 r8192 d23040 u45056
  13. [ 0.000000] pcpu-alloc: s13824 r8192 d23040 u45056 alloc=11*4096
  14. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  15. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121920
  16. [ 0.000000] Kernel command line:
  17. [ 0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8 root=mtd:rootfs rootfstype=squashfs
  18. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  19. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  20. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  21. [ 0.000000] Memory: 481444K/491520K available (4232K kernel code, 246K rwdata, 664K rodata, 220K init, 227K bss, 10076K reserved, 0K cma-reserved, 0K highmem)
  22. [ 0.000000] Virtual kernel memory layout:
  23. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  24. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  25. [ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
  26. [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
  27. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  28. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  29. [ 0.000000] .text : 0xc0208000 - 0xc06d0658 (4898 kB)
  30. [ 0.000000] .init : 0xc06d1000 - 0xc0708000 ( 220 kB)
  31. [ 0.000000] .data : 0xc0708000 - 0xc0745b40 ( 247 kB)
  32. [ 0.000000] .bss : 0xc0748000 - 0xc0780fc0 ( 228 kB)
  33. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  34. [ 0.000000] Hierarchical RCU implementation.
  35. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  36. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  37. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  38. [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
  39. [ 0.000007] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
  40. [ 0.000021] Switching to timer-based delay loop, resolution 160ns
  41. [ 0.000202] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
  42. [ 0.000227] pid_max: default: 32768 minimum: 301
  43. [ 0.000332] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  44. [ 0.000349] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  45. [ 0.000965] CPU: Testing write buffer coherency: ok
  46. [ 0.001277] Setting up static identity map for 0x42208280 - 0x422082d8
  47. [ 0.004204] Brought up 2 CPUs
  48. [ 0.004223] SMP: Total of 2 processors activated (25.00 BogoMIPS).
  49. [ 0.004234] CPU: All CPU(s) started in SVC mode.
  50. [ 0.014111] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
  51. [ 0.014293] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  52. [ 0.014322] futex hash table entries: 512 (order: 3, 32768 bytes)
  53. [ 0.014408] pinctrl core: initialized pinctrl subsystem
  54. [ 0.015656] NET: Registered protocol family 16
  55. [ 0.016909] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  56. [ 0.041452] cpuidle: using governor ladder
  57. [ 0.072467] cpuidle: using governor menu
  58. [ 0.086200] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
  59. [ 0.126482] pps_core: LinuxPPS API ver. 1 registered
  60. [ 0.126498] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  61. [ 0.126528] PTP clock support registered
  62. [ 0.127541] clocksource: Switched to clocksource dg_timer
  63. [ 0.129212] NET: Registered protocol family 2
  64. [ 0.129767] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  65. [ 0.129809] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  66. [ 0.129862] TCP: Hash tables configured (established 4096 bind 4096)
  67. [ 0.129910] UDP hash table entries: 256 (order: 1, 8192 bytes)
  68. [ 0.129934] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  69. [ 0.130095] NET: Registered protocol family 1
  70. [ 0.130139] PCI: CLS 0 bytes, default 64
  71. [ 0.131290] No memory allocated for crashlog
  72. [ 0.138143] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  73. [ 0.138157] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  74. [ 0.140659] io scheduler noop registered
  75. [ 0.140676] io scheduler deadline registered (default)
  76. [ 0.141789] 1b500000.pci supply vdda not found, using dummy regulator
  77. [ 0.141873] 1b500000.pci supply vdda_phy not found, using dummy regulator
  78. [ 0.141955] 1b500000.pci supply vdda_refclk not found, using dummy regulator
  79. [ 0.142480] PCI host bridge /soc/pci@1b500000 ranges:
  80. [ 0.142518] IO 0x0fe00000..0x0fefffff -> 0x0fe00000
  81. [ 0.142542] MEM 0x08000000..0x0fdfffff -> 0x08000000
  82. [ 0.170107] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
  83. [ 0.170128] pci_bus 0000:00: root bus resource [bus 00-ff]
  84. [ 0.170148] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
  85. [ 0.170164] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
  86. [ 0.170179] pci_bus 0000:00: scanning bus
  87. [ 0.170225] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
  88. [ 0.170322] pci 0000:00:00.0: calling 0xc021ead4
  89. [ 0.170379] pci 0000:00:00.0: supports D1
  90. [ 0.170393] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  91. [ 0.170412] pci 0000:00:00.0: PME# disabled
  92. [ 0.170643] pci_bus 0000:00: fixups for bus
  93. [ 0.170666] PCI: bus0: Fast back to back transfers disabled
  94. [ 0.170685] pci 0000:00:00.0: scanning [bus 01-01] behind bridge, pass 0
  95. [ 0.170824] pci_bus 0000:01: scanning bus
  96. [ 0.170968] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
  97. [ 0.171283] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
  98. [ 0.171643] pci 0000:01:00.0: calling 0xc021ead4
  99. [ 0.172021] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
  100. [ 0.172059] pci 0000:01:00.0: PME# disabled
  101. [ 0.172359] pci_bus 0000:01: fixups for bus
  102. [ 0.172422] PCI: bus1: Fast back to back transfers disabled
  103. [ 0.172437] pci_bus 0000:01: bus scan returning with max=01
  104. [ 0.172459] pci 0000:00:00.0: scanning [bus 01-01] behind bridge, pass 1
  105. [ 0.172478] pci_bus 0000:00: bus scan returning with max=01
  106. [ 0.172550] pci 0000:00:00.0: fixup irq: got 132
  107. [ 0.172564] pci 0000:00:00.0: assigning IRQ 132
  108. [ 0.172628] pci 0000:01:00.0: fixup irq: got 132
  109. [ 0.172642] pci 0000:01:00.0: assigning IRQ 132
  110. [ 0.172703] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
  111. [ 0.172729] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
  112. [ 0.172834] pci 0000:00:00.0: PCI bridge to [bus 01]
  113. [ 0.172855] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
  114. [ 0.173196] aer 0000:00:00.0:pcie02: service driver aer loaded
  115. [ 0.173530] 1b700000.pci supply vdda not found, using dummy regulator
  116. [ 0.173614] 1b700000.pci supply vdda_phy not found, using dummy regulator
  117. [ 0.173692] 1b700000.pci supply vdda_refclk not found, using dummy regulator
  118. [ 0.174193] PCI host bridge /soc/pci@1b700000 ranges:
  119. [ 0.174226] IO 0x31e00000..0x31efffff -> 0x31e00000
  120. [ 0.174246] MEM 0x2e000000..0x31dfffff -> 0x2e000000
  121. [ 0.205413] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
  122. [ 0.205432] pci_bus 0001:00: root bus resource [bus 00-ff]
  123. [ 0.205447] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
  124. [ 0.205460] pci_bus 0001:00: scanning bus
  125. [ 0.205499] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
  126. [ 0.205581] pci 0001:00:00.0: calling 0xc021ead4
  127. [ 0.205626] pci 0001:00:00.0: supports D1
  128. [ 0.205640] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
  129. [ 0.205657] pci 0001:00:00.0: PME# disabled
  130. [ 0.205884] pci_bus 0001:00: fixups for bus
  131. [ 0.205905] PCI: bus0: Fast back to back transfers disabled
  132. [ 0.205921] pci 0001:00:00.0: scanning [bus 01-01] behind bridge, pass 0
  133. [ 0.206048] pci_bus 0001:01: scanning bus
  134. [ 0.206190] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
  135. [ 0.206500] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
  136. [ 0.206857] pci 0001:01:00.0: calling 0xc021ead4
  137. [ 0.207234] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
  138. [ 0.207271] pci 0001:01:00.0: PME# disabled
  139. [ 0.207569] pci_bus 0001:01: fixups for bus
  140. [ 0.207630] PCI: bus1: Fast back to back transfers disabled
  141. [ 0.207643] pci_bus 0001:01: bus scan returning with max=01
  142. [ 0.207746] pci 0001:00:00.0: scanning [bus 01-01] behind bridge, pass 1
  143. [ 0.207766] pci_bus 0001:00: bus scan returning with max=01
  144. [ 0.207814] pcieport 0000:00:00.0: fixup irq: got 132
  145. [ 0.207828] pcieport 0000:00:00.0: assigning IRQ 132
  146. [ 0.207892] pci 0000:01:00.0: fixup irq: got 132
  147. [ 0.207905] pci 0000:01:00.0: assigning IRQ 132
  148. [ 0.207976] pci 0001:00:00.0: fixup irq: got 165
  149. [ 0.207990] pci 0001:00:00.0: assigning IRQ 165
  150. [ 0.208051] pci 0001:01:00.0: fixup irq: got 165
  151. [ 0.208064] pci 0001:01:00.0: assigning IRQ 165
  152. [ 0.208118] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
  153. [ 0.208139] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
  154. [ 0.208239] pci 0001:00:00.0: PCI bridge to [bus 01]
  155. [ 0.208258] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
  156. [ 0.208584] aer 0001:00:00.0:pcie02: service driver aer loaded
  157. [ 0.210850] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
  158. [ 0.211906] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
  159. [ 0.212905] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  160. [ 0.215714] msm_serial 16340000.serial: msm_serial: detected port #0
  161. [ 0.215832] msm_serial 16340000.serial: uartclk = 1843200
  162. [ 0.215899] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 166, base_baud = 115200) is a MSM
  163. [ 0.215938] msm_serial: console setup on port #0
  164. [ 0.857776] console [ttyMSM0] enabled
  165. [ 0.862609] msm_serial: driver initialized
  166. [ 0.872934] loop: module loaded
  167. [ 0.874111] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
  168. [ 0.876204] m25p80 spi32766.0: mx25u25635f (32768 Kbytes)
  169. [ 0.882449] 25 ofpart partitions found on MTD device spi32766.0
  170. [ 0.887556] Creating 25 MTD partitions on "spi32766.0":
  171. [ 0.893347] 0x000000000000-0x000000020000 : "SBL1"
  172. [ 0.899599] 0x000000020000-0x000000040000 : "MIBIB"
  173. [ 0.904344] 0x000000040000-0x000000060000 : "SBL2"
  174. [ 0.909170] 0x000000060000-0x000000090000 : "SBL3"
  175. [ 0.913916] 0x000000090000-0x0000000a0000 : "DDRCONFIG"
  176. [ 0.918745] 0x0000000a0000-0x0000000b0000 : "SSD"
  177. [ 0.923837] 0x0000000b0000-0x0000000e0000 : "TZ"
  178. [ 0.928782] 0x0000000e0000-0x000000100000 : "RPM"
  179. [ 0.933394] 0x000000100000-0x000000170000 : "fs-uboot"
  180. [ 0.938036] 0x000000170000-0x0000001b0000 : "uboot-env"
  181. [ 0.943013] 0x0000001b0000-0x0000001f0000 : "radio"
  182. [ 0.948137] 0x0000001f0000-0x0000003f0000 : "os-image"
  183. [ 0.953012] 0x0000003f0000-0x000001ef0000 : "rootfs"
  184. [ 0.958190] mtd: device 12 (rootfs) set to be root filesystem
  185. [ 0.962574] 1 squashfs-split partitions found on MTD device rootfs
  186. [ 0.968108] 0x0000006b0000-0x000001ef0000 : "rootfs_data"
  187. [ 0.975087] 0x000001ef0000-0x000001ef0200 : "default-mac"
  188. [ 0.980612] 0x000001ef0200-0x000001ef0400 : "pin"
  189. [ 0.985885] 0x000001ef0400-0x000001f00000 : "product-info"
  190. [ 0.990671] 0x000001f00000-0x000001f10000 : "partition-table"
  191. [ 0.995984] 0x000001f10000-0x000001f20000 : "soft-version"
  192. [ 1.001770] 0x000001f20000-0x000001f30000 : "support-list"
  193. [ 1.007082] 0x000001f30000-0x000001f40000 : "profile"
  194. [ 1.012889] 0x000001f40000-0x000001f50000 : "default-config"
  195. [ 1.017983] 0x000001f50000-0x000001f90000 : "user-config"
  196. [ 1.023618] 0x000001f90000-0x000001fd0000 : "qos-db"
  197. [ 1.028825] 0x000001fd0000-0x000001fe0000 : "usb-config"
  198. [ 1.033714] 0x000001fe0000-0x000002000000 : "log"
  199. [ 1.039901] libphy: Fixed MDIO Bus: probed
  200. [ 1.043120] libphy: GPIO Bitbanged MDIO: probed
  201. [ 1.069204] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
  202. [ 1.868553] stmmac - user ID: 0x10, Synopsys ID: 0x37
  203. [ 1.868577] Ring mode enabled
  204. [ 1.872574] DMA HW capability register supported
  205. [ 1.875530] Enhanced/Alternate descriptors
  206. [ 1.880303] Enabled extended descriptors
  207. [ 1.884295] RX Checksum Offload Engine supported (type 2)
  208. [ 1.888521] TX Checksum insertion supported
  209. [ 1.893842] Wake-Up On Lan supported
  210. [ 1.898332] Enable RX Mitigation via HW Watchdog Timer
  211. [ 1.903227] stmmac - user ID: 0x10, Synopsys ID: 0x37
  212. [ 1.906866] Ring mode enabled
  213. [ 1.912162] DMA HW capability register supported
  214. [ 1.915026] Enhanced/Alternate descriptors
  215. [ 1.919797] Enabled extended descriptors
  216. [ 1.923790] RX Checksum Offload Engine supported (type 2)
  217. [ 1.928040] TX Checksum insertion supported
  218. [ 1.933339] Wake-Up On Lan supported
  219. [ 1.937767] Enable RX Mitigation via HW Watchdog Timer
  220. [ 1.942021] i2c /dev entries driver
  221. [ 1.946953] gcc-ipq806x 900000.clock-controller: tsens calibration failed
  222. [ 1.950633] Speed bin: 0
  223. [ 1.956774] PVS bin: 0
  224. [ 1.959893] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
  225. [ 1.961591] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
  226. [ 1.968974] sdhci: Secure Digital Host Controller Interface driver
  227. [ 1.976051] sdhci: Copyright(c) Pierre Ossman
  228. [ 1.982367] sdhci-pltfm: SDHCI platform and OF driver helper
  229. [ 1.988581] L2 @ QSB rate. Forcing new rate.
  230. [ 1.992566] L2 @ 384000 KHz
  231. [ 1.996827] CPU0 @ 800000 KHz
  232. [ 1.999305] CPU1 @ QSB rate. Forcing new rate.
  233. [ 2.002427] CPU1 @ 384000 KHz
  234. [ 2.008601] NET: Registered protocol family 10
  235. [ 2.010924] NET: Registered protocol family 17
  236. [ 2.014131] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  237. [ 2.018889] 8021q: 802.1Q VLAN Support v1.8
  238. [ 2.031419] Registering SWP/SWPB emulation handler
  239. [ 2.037890] thermal thermal_zone2: failed to read out thermal zone (-110)
  240. [ 2.041067] cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
  241. [ 2.047603] cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:1, -19
  242. [ 2.055556] hctosys: unable to open rtc device (rtc0)
  243. [ 2.076693] VFS: Mounted root (squashfs filesystem) readonly on device 31:12.
  244. [ 2.076879] Freeing unused kernel memory: 220K
  245. [ 2.295381] random: nonblocking pool is initialized
  246. [ 3.655657] init: Console is alive
  247. [ 3.655817] init: - watchdog -
  248. [ 5.704328] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  249. [ 5.744673] usbcore: registered new interface driver usbfs
  250. [ 5.744743] usbcore: registered new interface driver hub
  251. [ 5.749188] usbcore: registered new device driver usb
  252. [ 5.757661] SCSI subsystem initialized
  253. [ 5.761568] libata version 3.00 loaded.
  254. [ 5.764290] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  255. [ 5.764621] ehci-platform: EHCI generic platform driver
  256. [ 5.772018] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  257. [ 5.775173] ohci-platform: OHCI generic platform driver
  258. [ 5.888387] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  259. [ 5.888453] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  260. [ 5.892972] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x00010010
  261. [ 5.900475] xhci-hcd xhci-hcd.0.auto: irq 168, io mem 0x11000000
  262. [ 5.910102] hub 1-0:1.0: USB hub found
  263. [ 5.915312] hub 1-0:1.0: 1 port detected
  264. [ 5.919345] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  265. [ 5.922908] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  266. [ 5.928492] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  267. [ 5.936591] hub 2-0:1.0: USB hub found
  268. [ 5.944367] hub 2-0:1.0: 1 port detected
  269. [ 5.947934] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  270. [ 5.951716] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
  271. [ 5.957146] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x00010010
  272. [ 5.964654] xhci-hcd xhci-hcd.1.auto: irq 169, io mem 0x10000000
  273. [ 5.973769] hub 3-0:1.0: USB hub found
  274. [ 5.979583] hub 3-0:1.0: 1 port detected
  275. [ 5.983238] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  276. [ 5.987129] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
  277. [ 5.992564] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  278. [ 6.000448] hub 4-0:1.0: USB hub found
  279. [ 6.008413] hub 4-0:1.0: 1 port detected
  280. [ 6.013367] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  281. [ 6.019421] init: - preinit -
  282. [ 10.028077] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
  283. [ 11.525420] jffs2: notice: (155) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  284. [ 11.532012] mount_root: switching to jffs2 overlay
  285. [ 11.575379] urandom-seed: Seeding with /etc/urandom.seed
  286. [ 11.669635] procd: - early -
  287. [ 11.669720] procd: - watchdog -
  288. [ 12.348276] procd: - watchdog -
  289. [ 12.348835] procd: - ubus -
  290. [ 12.416062] procd: - init -
  291. [ 14.420605] kmodloader: loading kernel modules from /etc/modules.d/*
  292. [ 14.423950] ip6_tables: (C) 2000-2006 Netfilter Core Team
  293. [ 14.431133] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
  294. [ 14.431326] Backport generated by backports.git backports-20160324-13-g24da7d3c
  295. [ 14.460664] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
  296. [ 14.460749] ath10k_pci 0000:01:00.0: enabling bus mastering
  297. [ 14.461201] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
  298. [ 14.594109] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
  299. [ 14.594148] ath10k_pci 0000:01:00.0: Falling back to user helper
  300. [ 14.641737] firmware ath10k!pre-cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed
  301. [ 15.193865] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
  302. [ 15.193899] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
  303. [ 15.203595] ath10k_pci 0000:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
  304. [ 15.210709] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002 from ath10k/QCA99X0/hw2.0/board-2.bin
  305. [ 15.219983] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 7e56fd07
  306. [ 16.401683] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1
  307. [ 16.474882] ath: EEPROM regdomain: 0x0
  308. [ 16.474902] ath: EEPROM indicates default country code should be used
  309. [ 16.474915] ath: doing EEPROM country->regdmn map search
  310. [ 16.474932] ath: country maps to regdmn code: 0x3a
  311. [ 16.474946] ath: Country alpha2 being used: US
  312. [ 16.474959] ath: Regpair used: 0x3a
  313. [ 16.497216] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
  314. [ 16.497329] ath10k_pci 0001:01:00.0: enabling bus mastering
  315. [ 16.497989] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
  316. [ 16.639580] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2
  317. [ 16.639618] ath10k_pci 0001:01:00.0: Falling back to user helper
  318. [ 16.738577] firmware ath10k!pre-cal-pci-0001:01:00.0.bin: firmware_loading_store: map pages failed
  319. [ 16.742071] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
  320. [ 16.746431] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
  321. [ 16.757773] ath10k_pci 0001:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
  322. [ 16.764185] ath10k_pci 0001:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=0040,subsystem-vendor=168c,subsystem-device=0002ÀÜëCÀUÅ.Úø=FÝÌ{¿ä=FÝ . from ath10k/QCA99X0/hw2.0/board-2.bin
  323. [ 16.773297] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 7e56fd07
  324. [ 18.000913] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1
  325. [ 18.078465] ath: EEPROM regdomain: 0x0
  326. [ 18.078491] ath: EEPROM indicates default country code should be used
  327. [ 18.078508] ath: doing EEPROM country->regdmn map search
  328. [ 18.078532] ath: country maps to regdmn code: 0x3a
  329. [ 18.078553] ath: Country alpha2 being used: US
  330. [ 18.078569] ath: Regpair used: 0x3a
  331. [ 18.089376] ip_tables: (C) 2000-2006 Netfilter Core Team
  332. [ 18.097554] nf_conntrack version 0.5.0 (7526 buckets, 30104 max)
  333. [ 18.235533] xt_time: kernel timezone is -0000
  334. [ 18.240684] PPP generic driver version 2.4.2
  335. [ 18.241690] NET: Registered protocol family 24
  336. [ 18.245897] kmodloader: done loading kernel modules from /etc/modules.d/*
  337. [ 21.007781] device eth1 entered promiscuous mode
  338. [ 21.009973] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  339. [ 22.987930] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
  340. [ 23.017941] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  341. [ 23.325670] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  342. [ 24.595303] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
  343. [ 24.595678] br-lan: port 1(eth1) entered forwarding state
  344. [ 24.600118] br-lan: port 1(eth1) entered forwarding state
  345. [ 24.606251] device wlan0 entered promiscuous mode
  346. [ 24.611683] device wlan1 entered promiscuous mode
  347. [ 24.621870] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  348. [ 24.647793] ath10k_pci 0001:01:00.0: no channel configured; ignoring frame(s)!
  349. [ 24.702658] ath10k_pci 0001:01:00.0: no channel configured; ignoring frame(s)!
  350. [ 25.147480] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
  351. [ 25.147988] br-lan: port 3(wlan1) entered forwarding state
  352. [ 25.153014] br-lan: port 3(wlan1) entered forwarding state
  353. [ 25.635015] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  354. [ 25.635258] br-lan: port 2(wlan0) entered forwarding state
  355. [ 25.640618] br-lan: port 2(wlan0) entered forwarding state
  356. [ 26.597897] br-lan: port 1(eth1) entered forwarding state
  357. [ 27.147907] br-lan: port 3(wlan1) entered forwarding state
  358. [ 27.638016] br-lan: port 2(wlan0) entered forwarding state
Advertisement
RAW Paste Data Copied
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!