API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Feb 7th, 2019
233
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 324.01 KB | None | 0 0
raw download clone embed print report
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2019.02.05 16:06:40 =~=~=~=~=~=~=~=~=~=~=~=
  2. ЁHЁЁHhU5%Є‹‹K—‚ВЩ±‚І…±Х•Ѓ
  3. ™С•ЙйєjФ¤ФЁHhU5%Х‹‹K—‚ВЙЙbІ…±Х•й‚‚jФ¤ФЁHhU5%Є‘‘ЙйЃ‚ВЙИbІ…±Х•Ѓ
  4. ™С•Йй‚’jФ¤ФЁHhU5%ХK‹K—‚ВЩбbІ…±Х•йЃВjj¤ФЁHhU5%ХE‹K—‚ВЩбbІ…±Х•Ѓ†™С•ЙйЃВjj¤ФЁHhU5%Ц‘‘ЙйЃ‚ВЩ±ЃІ…±Х•йЃўjj¤ФЁHhU5%Х‘‘ЙйЃ‚ВЩ
  5. ±‚І…±Х•Ѓ…™С•ЙйЃўjj¤ь
  6.  
  7. [USB]addr: 0x110020B0 (UART1), value: 0
  8.  
  9.  
  10.  
  11. [USB]addr: 0x110020B0 (UART1), value after: 1
  12.  
  13. [pmic_init] Preloader Start,MT6328 CHIP Code = 0x2820
  14.  
  15. just_rst = 0
  16.  
  17. bat is exist
  18.  
  19. [6328]e-data[0x0]=0x1F
  20.  
  21. [6328]e-data[0x1]=0x1144
  22.  
  23. [6328]e-data[0x2]=0x8208
  24.  
  25. [6328]e-data[0x3]=0x20
  26.  
  27. [6328]e-data[0x4]=0x0
  28.  
  29. [6328]e-data[0x5]=0x47C0
  30.  
  31. [6328]e-data[0x6]=0xFFC0
  32.  
  33. [6328]e-data[0x7]=0x43
  34.  
  35. [6328]e-data[0x8]=0xE03C
  36.  
  37. [6328]e-data[0x9]=0x646C
  38.  
  39. [6328]e-data[0xA]=0x0
  40.  
  41. [6328]e-data[0xB]=0x0
  42.  
  43. [6328]e-data[0xC]=0xA080
  44.  
  45. [6328]e-data[0xD]=0x19
  46.  
  47. [6328]e-data[0xE]=0x0
  48.  
  49. [6328]e-data[0xF]=0x0
  50.  
  51. [6328]e-data[0x10]=0xF800
  52.  
  53. [6328]e-data[0x11]=0x1
  54.  
  55. [6328]e-data[0x12]=0x0
  56.  
  57. [6328]e-data[0x13]=0x0
  58.  
  59. [6328]e-data[0x14]=0x0
  60.  
  61. [6328]e-data[0x15]=0x0
  62.  
  63. [6328]e-data[0x16]=0x0
  64.  
  65. [6328]e-data[0x17]=0xCB0
  66.  
  67. [6328]e-data[0x18]=0xB745
  68.  
  69. [6328]e-data[0x19]=0x780D
  70.  
  71. [6328]e-data[0x1A]=0xB267
  72.  
  73. [6328]e-data[0x1B]=0x211E
  74.  
  75. [6328]e-data[0x1C]=0x0
  76.  
  77. [6328]e-data[0x1D]=0x0
  78.  
  79. [6328]e-data[0x1E]=0x0
  80.  
  81. [6328]e-data[0x1F]=0x0
  82.  
  83. [pmic_6328_efuse_management]4.27 efuse_data[0x11]:0x1
  84.  
  85. [pmic_6328_efuse_management]4.27 efuse_data[0x11][448:472]:0x1
  86.  
  87. bat is exist
  88.  
  89. [pmic_init] Done...................
  90.  
  91. [PLFM] Init I2C: OK(0)
  92.  
  93. [PLFM] Init PWRAP: OK(0)
  94.  
  95. [PLFM] Init PMIC: OK(0)
  96.  
  97. [PLFM] chip_code[335]
  98.  
  99. [PLFM] chip_ver[0]
  100.  
  101.  
  102.  
  103. [BLDR] Build Time: 20151127-162453
  104.  
  105. WDT DDR reserve mode success! 300F3
  106.  
  107. DDR is in self-refresh. 300F3
  108.  
  109. RGU rgu_release_rg_dramc_conf_iso:new_value = 0x307F3, old_value = 0x303F3
  110.  
  111. RGU rgu_release_rg_dramc_conf_iso:new_value = 0x303F3, old_value = 0x303F3
  112.  
  113. RGU rgu_release_rg_dramc_conf_iso:MTK_WDT_DEBUG_CTL(590303F3)
  114.  
  115. RGU rgu_release_rg_dramc_iso:new_value = 0x303F3, old_value = 0x301F3
  116.  
  117. RGU rgu_release_rg_dramc_iso:new_value = 0x301F3, old_value = 0x301F3
  118.  
  119. RGU rgu_release_rg_dramc_iso:MTK_WDT_DEBUG_CTL(590301F3)
  120.  
  121. RGU rgu_release_rg_dramc_sref:new_value = 0x301F3, old_value = 0x100F3
  122.  
  123. RGU rgu_release_rg_dramc_sref:new_value = 0x100F3, old_value = 0x100F3
  124.  
  125. RGU rgu_release_rg_dramc_sref:MTK_WDT_DEBUG_CTL(590300F3)
  126.  
  127. DDR is not in self-refresh. 100F3
  128.  
  129. ==== Dump RGU Reg ========
  130.  
  131. RGU MODE: 94
  132.  
  133. RGU LENGTH: FFE0
  134.  
  135. RGU STA: 40000000
  136.  
  137. RGU INTERVAL: FFF
  138.  
  139. RGU SWSYSRST: 8000
  140.  
  141. ==== Dump RGU Reg End ====
  142.  
  143. RGU: g_rgu_satus:2
  144.  
  145. mtk_wdt_mode_config mode value=90, tmp:22000090
  146.  
  147. PL RGU RST: ??
  148.  
  149. SW reset with bypass power key flag
  150.  
  151. Find bypass powerkey flag
  152.  
  153. mtk_wdt_mode_config mode value=DD, tmp:220000DD
  154.  
  155. WDT NONRST=0x20000000
  156.  
  157. WDT IRQ_EN=0x300000
  158.  
  159. WDT REQ_EN=0x3C0002
  160.  
  161. RGU mtk_wdt_init:MTK_WDT_DEBUG_CTL(590000F3)
  162.  
  163. SW reset with bypass power key flag
  164.  
  165. SW reset with bypass power key flag
  166.  
  167. [PLFM] WDT reboot bypass power key!
  168.  
  169. [DDR Reserve mode] EMI dummy read CONA = 0x2A052
  170.  
  171. RGU rgu_dram_reserved:MTK_WDT_MODE(220000DD)
  172.  
  173. [PLFM] Init Boot Device: OK(0)
  174.  
  175. ЂЂЂЂ ЂЂ Ђ ЂЂ ЂЂ[ROM_INFO] 'v2','0x0','0x0','0x0','0x2C00'
  176.  
  177. [SEC_K] SML KEY AC = 0
  178.  
  179. [SEC_K] SBC_PUBK Found
  180.  
  181. [SEC] AES Legacy : 0
  182.  
  183. [SEC] SECCFG AC : 1
  184.  
  185.  
  186.  
  187. [LIB] Loading SEC config
  188.  
  189. [LIB] Name =
  190.  
  191. [LIB] Config = 0x22, 0x22
  192.  
  193. [LIB] SECRO (ac, ac_offset, ac_length) = (0x1, 0x40, 0x40)
  194.  
  195. 0x31,0x41,0x35,0x35
  196.  
  197. [SEC] DBGPORT (0 1)
  198.  
  199.  
  200.  
  201.  
  202.  
  203. [SEC] read '0x4F80000'
  204.  
  205. 0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
  206.  
  207. [LIB] CFG read size '0x2000' '0x1860'
  208.  
  209. 0x0
  210.  
  211. [LIB] HW DEC
  212.  
  213. 0xD0A41105
  214.  
  215. [LIB] SEC CFG doesn't exist
  216.  
  217. [SEC] init fail '0x3000'
  218.  
  219. [LIB] seccfg magic is incorrect
  220.  
  221. [pmic_IsUsbCableIn] 0
  222.  
  223. [LIB] NS-CHIP
  224.  
  225. [SBC] Don't check
  226.  
  227.  
  228.  
  229. Device APC domain init setup:
  230.  
  231.  
  232.  
  233. Domain Setup (0x0)
  234.  
  235. Domain Setup (0x0)
  236.  
  237. Domain Setup (0x0)
  238.  
  239. Device APC domain after setup:
  240.  
  241. Domain Setup (0x12000000)
  242.  
  243. Domain Setup (0x0)
  244.  
  245. Domain Setup (0x0)
  246.  
  247. [TZ_INIT] tee_verify_image : passed
  248.  
  249. [BLDR] bldr load tee part ret=0x0, addr=0x43001000
  250.  
  251. [BLDR] part_load_raw_part ret=0x0
  252.  
  253. [BLDR] part_load_images ret=0x0
  254.  
  255. bat is exist
  256.  
  257. [PLFM],64S3,boot_opt=0x0
  258.  
  259. [PLFM],32N2,boot_opt=0x6
  260.  
  261. [PLFM],64N2,boot_opt=0x4
  262.  
  263.  
  264.  
  265. [PLFM] boot to LK by ATAG.
  266.  
  267. boot reason: 4
  268.  
  269. boot mode: 0
  270.  
  271. META COM0: 0
  272.  
  273. rank[0] size: 0x40000000
  274.  
  275. rank[1] size: 0x3FFC0000
  276.  
  277. tee reserved mem: 0x00000000BFFC0000, 0x0000000000040000
  278.  
  279. md_type[0]: 0x0
  280.  
  281. md_type[1]: 0x0
  282.  
  283. boot time: 922
  284.  
  285. DDR reserve mode: enable = 1, success = 1
  286.  
  287. dram buffer size: 1688768
  288.  
  289. SMC: 0x0
  290.  
  291. LK: 0x6
  292.  
  293. KERNEL: 0x4
  294.  
  295. NONSEC SRAM Addr: 0x12C000
  296.  
  297. NONSEC SRAM Size: 0x4000
  298.  
  299. [TZ_INIT] hwuid[0] : 0xA603D3B3
  300.  
  301. [TZ_INIT] hwuid[1] : 0xB967D7E2
  302.  
  303. [TZ_INIT] hwuid[2] : 0x5143802E
  304.  
  305. [TZ_INIT] hwuid[3] : 0x97E23461
  306.  
  307. [TZ_INIT] HRID[0] : 0x5934573D
  308.  
  309. [TZ_INIT] HRID[1] : 0x416688B1
  310.  
  311. [TZ_INIT] atf_log_port : 0x11002000
  312.  
  313. [TZ_INIT] atf_log_baudrate : 0xE1000
  314.  
  315. [TZ_INIT] atf_irq_num : 281
  316.  
  317. [TZ_INIT] ATF log buffer start : 0xBFFC0000
  318.  
  319. [TZ_INIT] ATF log buffer size : 0x40000
  320.  
  321. [TZ_INIT] ATF aee buffer start : 0xBFFFC000
  322.  
  323. [TZ_INIT] ATF aee buffer size : 0x4000
  324.  
  325. [BLDR] Others, jump to ATF
  326.  
  327.  
  328.  
  329. [BLDR] jump to 0x41E00000
  330.  
  331. [BLDR] <0x41E00000>=0xEA000007
  332.  
  333. [BLDR] <0x41E00004>=0xEA006FAF
  334.  
  335. [TZ_SEC_CFG] SRAMROM Secure Addr 0x2C000
  336.  
  337. [TZ_SEC_CFG] SRAMROM Secure Control 0x0
  338.  
  339. [TZ_SEC_CFG] SRAMROM Secure Control 0xB69
  340.  
  341. [TZ_SEC_CFG] SRAMROM Secure Control 0x1B680B69
  342.  
  343. [TZ_INIT] ATF entry addr, aligned addr : 0x43001000, 0x43000000
  344.  
  345. [TZ_EMI_MPU] MPU [0x43000000-0x4302FFFF]
  346.  
  347. [TZ_INIT] set secure memory protection : 0x43000000, 0x4302FFFF (1)
  348.  
  349. [TZ_INIT] Jump to ATF, then 0x41E00000
  350.  
  351. [ATF][ 0.000000]BL33 boot argument location=0x4219c480
  352.  
  353. [ATF][ 0.000000]BL33 boot argument size=0x168
  354.  
  355. [ATF][ 0.000000]BL33 start addr=0x41e00000
  356.  
  357. [ATF][ 0.000000]teearg addr=0x101000
  358.  
  359. [ATF][ 0.000000]atf_magic=0x4d415446
  360.  
  361. [ATF][ 0.000000]tee_support=0x0
  362.  
  363. [ATF][ 0.000000]tee_entry=0x0
  364.  
  365. [ATF][ 0.000000]tee_boot_arg_addr=0x101100
  366.  
  367. [ATF][ 0.000000]atf_log_port=0x11002000
  368.  
  369. [ATF][ 0.000000]atf_log_baudrate=0xe1000
  370.  
  371. [ATF][ 0.000000]atf_log_buf_start=0xbffc0000
  372.  
  373. [ATF][ 0.000000]atf_log_buf_size=0x40000
  374.  
  375. [ATF][ 0.000000]atf_aee_debug_buf_start=0xbfffc000
  376.  
  377. [ATF][ 0.000000]atf_aee_debug_buf_size=0x4000
  378.  
  379. [ATF][ 0.000000]atf_irq_num=281
  380.  
  381. [ATF][ 0.000000]BL33_START_ADDRESS=0x41e00000
  382.  
  383. [ATF][ 0.000000]atf chip_code[335]
  384. [ATF][ 0.000000]atf chip_ver[0]
  385. [ATF][ 0.000000]###@@@ MP0_MISC_CONFIG3:0x00000000 @@@###
  386. [ATF][ 0.000000]###@@@ MP0_MISC_CONFIG3:0x0000e000 @@@###
  387. [ATF][ 0.000000]mmap atf buffer : 0xbffc0000, 0x40000
  388.  
  389. [ATF][ 0.000000]mmap atf buffer (force 2MB aligned): 0xbfe00000, 0x200000
  390.  
  391. NOTICE: BL3-1: v1.0(debug):ae0142a
  392. NOTICE: BL3-1: Built : 16:25:02, Nov 27 2015
  393. [ATF][ 0.000000]sta=0x0 int=0xff8
  394.  
  395. [ATF][ 0.000000]is_power_on_boot: false
  396. [ATF][ 0.000000]mt_log_setup - atf_buf_addr : 0xbffc0100
  397. [ATF][ 0.000000]mt_log_setup - atf_buf_size : 0x2bf00
  398. [ATF][ 0.000000]mt_log_setup - atf_write_pos : 0xbffc0100
  399. [ATF][ 0.000000]mt_log_setup - atf_read_pos : 0xbffc0100
  400. [ATF][ 0.000000]mt_log_setup - atf_buf_lock : 0x0
  401. [ATF][ 0.000000]mt_log_setup - mt_log_buf_end : 0xbffebfff
  402. [ATF][ 0.000000]mt_log_setup - ATF_CRASH_LAST_LOG_SIZE : 0x8000
  403. [ATF][ 0.000000]mt_log_setup - ATF_EXCEPT_BUF_SIZE_PER_CPU : 0x1000
  404. [ATF][ 0.000000]mt_log_setup - ATF_EXCEPT_BUF_SIZE : 0x8000
  405. [ATF][ 0.000000]mt_log_setup - PLATFORM_CORE_COUNT : 0x8
  406. [ATF][ 0.000000]mt_log_setup - atf_except_write_pos_per_cpu[0]: 0xbfff4000
  407. [ATF][ 0.000000]mt_log_setup - atf_except_write_pos_per_cpu[1]: 0xbfff5000
  408. [ATF][ 0.000000]mt_log_setup - atf_except_write_pos_per_cpu[2]: 0xbfff6000
  409. [ATF][ 0.000000]mt_log_setup - atf_except_write_pos_per_cpu[3]: 0xbfff7000
  410. [ATF][ 0.000000]mt_log_setup - atf_except_write_pos_per_cpu[4]: 0xbfff8000
  411. [ATF][ 0.000000]mt_log_setup - atf_except_write_pos_per_cpu[5]: 0xbfff9000
  412. [ATF][ 0.000000]mt_log_setup - atf_except_write_pos_per_cpu[6]: 0xbfffa000
  413. [ATF][ 0.000000]mt_log_setup - atf_except_write_pos_per_cpu[7]: 0xbfffb000
  414. [ATF][ 0.000000]mt_log_setup - atf_crash_flag : 0x0
  415. [ATF][ 0.000000]mt_log_setup - atf_crash_log_addr : 0x0
  416. [ATF][ 0.000000]mt_log_setup - atf_crash_log_size : 0x0
  417. [ATF][ 0.000000]ATF log service is registered (0xbffc0000, aee:0xbfffc000)
  418. [ATF][ 0.000000]BL3-1: v1.0(debug):ae0142a
  419. [ATF][ 0.000000]BL3-1: Built : 16:25:02, Nov 27 2015
  420. INFO: BL3-1: Initializing runtime services
  421. [ATF][ 0.000000][BL31] Jump to FIQD for initialization!
  422.  
  423. INFO: BL3-1: Preparing for EL3 exit to normal world, LK
  424. INFO: BL3-1: Next image address = 0x41e00000
  425. INFO: BL3-1: Next image spsr = 0x1d3
  426. [ATF][ 0.000000][BL31] Final dump!
  427.  
  428. [0] kernel_boot_opt=4
  429.  
  430. [0] 64Bit Kernel
  431.  
  432. [0] [WDT] mtk_wdt_mode LK config mode value=dd
  433.  
  434. [0] [WDT] mtk_wdt_mode_config LK mode value=90, tmp:22000090
  435.  
  436. [0] [WDT] UB wdt init
  437.  
  438. [0] [WDT] mtk_wdt_mode LK config mode value=90
  439.  
  440. [0] [WDT] mtk_wdt_mody CON = 0x0
  441.  
  442. [0] [LK_DDP/PWM][PWM] set reg[0x102100b0] = 0x00000000
  443.  
  444. [0] [LK_DDP/PWM][PWM] disp_pwm_init : CLK_CFG_7 0x0 => 0x0
  445.  
  446. [0] [LK_DDP/PWM][PWM] disp_pwm_init : PWM config data (0,0)
  447.  
  448. [0] [LK_DDP/PWM][PWM] set reg[0x1100e010] = 0x00000000
  449.  
  450. [0] [LK_DDP/PWM][PWM] set reg[0x1100e014] = 0x000003ff
  451.  
  452. [0] [LK_DDP/PWM][PWM] disp_pwm_set_backlight(id = 0x1, level_1024 = 0)
  453.  
  454. [0] [LK_DDP/PWM][PWM] set reg[0x1100e008] = 0x00000000
  455.  
  456. [0] [LK_DDP/PWM][PWM] set reg[0x1100e014] = 0x000003ff
  457.  
  458. [0] [LK_DDP/PWM][PWM] set reg[0x1100e000] = 0x00000000
  459.  
  460. [0] [LK_DDP/PWM][PWM] set reg[0x1100e008] = 0x00000001
  461.  
  462. [0] [LK_DDP/PWM][PWM] set reg[0x1100e008] = 0x00000000
  463.  
  464. [0] [LK_DDP/PWM][PWM] reg[0x1100e000] = 0x00000000
  465.  
  466. [0] [LK_DDP/PWM][PWM] reg[0x1100e004] = 0x00000000
  467.  
  468. [0] [LK_DDP/PWM][PWM] reg[0x1100e008] = 0x00000000
  469.  
  470. [0] [LK_DDP/PWM][PWM] reg[0x1100e00c] = 0x00000000
  471.  
  472. [0] [LK_DDP/PWM][PWM] reg[0x1100e010] = 0x00000000
  473.  
  474. [0] [LK_DDP/PWM][PWM] reg[0x1100e014] = 0x00000000
  475.  
  476. [0] [LK_DDP/PWM][PWM] reg[0x1100e018] = 0x00000000
  477.  
  478. [0] [LK_DDP/PWM][PWM] reg[0x1100e01c] = 0x00000000
  479.  
  480. [0] [LK_DDP/PWM][PWM] reg[0x1100e020] = 0x00000000
  481.  
  482. [0] [LK_DDP/PWM][PWM] reg[0x1100e024] = 0x00000000
  483.  
  484. [0] [LK_DDP/PWM][PWM] reg[0x1100e028] = 0x00000000
  485.  
  486. [0] [PROFILE] ------- led init takes 15 ms --------
  487.  
  488. [0] [pmic_init] LK Start..................
  489.  
  490. [0] [pmic_init] MT6325 CHIP Code = 0x2820
  491.  
  492. [0] [pmic_init] Done
  493.  
  494. [0] [PROFILE] ------- pmic_init takes 1 ms --------
  495.  
  496. [0] [PROFILE] ------- platform_early_init takes 24 ms --------
  497.  
  498. [0] welcome to lk
  499.  
  500.  
  501.  
  502. [0] calling constructors
  503.  
  504. [0] initializing heap
  505.  
  506. [0] base 0x41e67b94 size 9012332 bytes
  507.  
  508. [0] initializing threads
  509.  
  510. [0] initializing dpc
  511.  
  512. [0] initializing timers
  513.  
  514. [0] creating bootstrap completion thread
  515.  
  516. [10] top of bootstrap2()
  517.  
  518. [20] initializing platform
  519.  
  520. [20] platform_init()
  521.  
  522. [20] [mmc_init]: msdc0 start mmc_init_host() in LK...
  523.  
  524. [20] [msdc_init]: msdc0 Host controller intialization start
  525.  
  526. [20] [MSDC] config VEMC to 3V in lk
  527.  
  528. [20] [SD0] Pins mode(1), none(0), down(1), up(2), keep(3)
  529.  
  530. [20] [SD0] Pins mode(2), none(0), down(1), up(2), keep(3)
  531.  
  532. [20] [MSDC] config VEMC to 3V in lk
  533.  
  534. [20] [info][msdc_set_startbit 1248] read data start bit at rising edge
  535.  
  536. [20] [info][msdc_config_clksrc] input clock is 400000kHz
  537.  
  538. [20] [SD0] Bus Width: 1
  539.  
  540. [20] [info][msdc_config_clksrc] input clock is 400000kHz
  541.  
  542. [20] [info][msdc_set_startbit 1248] read data start bit at rising edge
  543.  
  544. [20] [SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(385) DS(0) RS(0)
  545.  
  546. [20] [msdc_init]: msdc0 Host controller intialization done
  547.  
  548. [20] [mmc_init]: msdc0 start mmc_init_card()in LK...
  549.  
  550. [20] [mmc_init_card]: start
  551.  
  552. [140] [info][msdc_config_clksrc] input clock is 400000kHz
  553.  
  554. [140] [info][msdc_set_startbit 1248] read data start bit at rising edge
  555.  
  556. [140] [SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(0) DDR(0) DIV(385) DS(0) RS(0)
  557.  
  558. [140] [SD0] Bus Width: 8
  559.  
  560. [160] [SD0] Switch to High-Speed mode!
  561.  
  562. [160] [info][msdc_config_clksrc] input clock is 400000kHz
  563.  
  564. [160] [info][msdc_set_startbit 1248] read data start bit at rising edge
  565.  
  566. [160] [SD0] SET_CLK(260kHz): SCLK(259kHz) MODE(2) DDR(1) DIV(192) DS(0) RS(0)
  567.  
  568. [160] [SD0] Bus Width: 8
  569.  
  570. [160] [SD0] Size: 14910 MB, Max.Speed: 52000 kHz, blklen(512), nblks(30535680), ro(0)
  571.  
  572. [160] [mmc_init_mem_card 3240][SD0] Initialized, eMMC50
  573.  
  574. [180] before host->cur_bus_clk(259740)
  575.  
  576. [180] [info][msdc_config_clksrc] input clock is 400000kHz
  577.  
  578. [180] [info][msdc_set_startbit 1248] read data start bit at rising edge
  579.  
  580. [180] [SD0] SET_CLK(52000kHz): SCLK(50000kHz) MODE(2) DDR(1) DIV(1) DS(0) RS(0)
  581.  
  582. [180] host->cur_bus_clk(50000000)
  583.  
  584. [180] [mmc_init_card]: finish successfully
  585.  
  586. [180] [mt_part_register_device]
  587.  
  588. [180] [GPT_LK]Parsing Primary GPT now...
  589.  
  590. [180] [GPT_LK][0]name=proinfo, part_id=8, start_sect=0x400, nr_sects=0x1800
  591.  
  592. [180] [GPT_LK][1]name=nvram, part_id=8, start_sect=0x1c00, nr_sects=0x2800
  593.  
  594. [180] [GPT_LK][2]name=protect1, part_id=8, start_sect=0x4400, nr_sects=0x5000
  595.  
  596. [180] [GPT_LK][3]name=protect2, part_id=8, start_sect=0x9400, nr_sects=0x5000
  597.  
  598. [180] [GPT_LK][4]name=lk, part_id=8, start_sect=0xe400, nr_sects=0x400
  599.  
  600. [200] [GPT_LK][5]name=para, part_id=8, start_sect=0xe800, nr_sects=0x400
  601.  
  602. [200] [GPT_LK][6]name=boot, part_id=8, start_sect=0xec00, nr_sects=0x8000
  603.  
  604. [200] [GPT_LK][7]name=recovery, part_id=8, start_sect=0x16c00, nr_sects=0x8000
  605.  
  606. [200] [GPT_LK][8]name=logo, part_id=8, start_sect=0x1ec00, nr_sects=0x4000
  607.  
  608. [200] [GPT_LK][9]name=expdb, part_id=8, start_sect=0x22c00, nr_sects=0x5000
  609.  
  610. [200] [GPT_LK][10]name=seccfg, part_id=8, start_sect=0x27c00, nr_sects=0x400
  611.  
  612. [200] [GPT_LK][11]name=oemkeystore, part_id=8, start_sect=0x28000, nr_sects=0x1000
  613.  
  614. [200] [GPT_LK][12]name=secro, part_id=8, start_sect=0x29000, nr_sects=0x3000
  615.  
  616. [200] [GPT_LK][13]name=keystore, part_id=8, start_sect=0x2c000, nr_sects=0x4000
  617.  
  618. [200] [GPT_LK][14]name=tee1, part_id=8, start_sect=0x30000, nr_sects=0x2800
  619.  
  620. [200] [GPT_LK][15]name=tee2, part_id=8, start_sect=0x32800, nr_sects=0x2800
  621.  
  622. [200] [GPT_LK][16]name=frp, part_id=8, start_sect=0x35000, nr_sects=0x800
  623.  
  624. [220] [GPT_LK][17]name=nvdata, part_id=8, start_sect=0x35800, nr_sects=0x10000
  625.  
  626. [220] [GPT_LK][18]name=metadata, part_id=8, start_sect=0x45800, nr_sects=0x12800
  627.  
  628. [220] [GPT_LK][19]name=system, part_id=8, start_sect=0x58000, nr_sects=0x400000
  629.  
  630. [220] [GPT_LK][20]name=cache, part_id=8, start_sect=0x458000, nr_sects=0xc8000
  631.  
  632. [220] [GPT_LK][21]name=userdata, part_id=8, start_sect=0x520000, nr_sects=0x17f6c00
  633.  
  634. [220] [GPT_LK][22]name=flashinfo, part_id=8, start_sect=0x1d16c00, nr_sects=0x8000
  635.  
  636. [220] [GPT_LK]Success to find valid GPT.
  637.  
  638. [220] [SD0] boot device found
  639.  
  640. [220] [PROFILE] ------- NAND/EMMC init takes 108 ms --------
  641.  
  642. [220] [PART_LK][get_part] para
  643.  
  644. [LK_ENV]ENV initialize sucess
  645.  
  646. [LK_ENV]env:
  647.  
  648. data_free_size_th=52428800
  649.  
  650. off-mode-charge=1
  651.  
  652. [220] [PROFILE] ------- ENV init takes 3 ms --------
  653.  
  654. [240] [DISP]func|disp_lcm_probe
  655.  
  656. junTang lcm_get_params 224
  657.  
  658. [240] [DISP]func|_display_interface_path_init
  659.  
  660. [240] [LK_DDP/ddp_manager]scenario display_interface acquire mutex 0 , left mutex 0x1e!
  661.  
  662. [240] [LK_DDP/ddp_manager]assign default irqs table index 0
  663.  
  664. [240] [LK_DDP/ddp_manager]create handle 0x41e55f40 on scenario display_interface
  665.  
  666. [240] [LK_DDP/ddp_manager] scenario display_interface include module ovl0
  667.  
  668. [240] [LK_DDP/ddp_manager] scenario display_interface include module color0
  669.  
  670. [240] [LK_DDP/ddp_manager] scenario display_interface include module ccorr
  671.  
  672. [240] [LK_DDP/ddp_manager] scenario display_interface include module aal
  673.  
  674. [240] [LK_DDP/ddp_manager] scenario display_interface include module gamma
  675.  
  676. [240] [LK_DDP/ddp_manager] scenario display_interface include module dither
  677.  
  678. [240] [LK_DDP/ddp_manager] scenario display_interface include module rdma0
  679.  
  680. [240] [LK_DDP/ddp_manager] scenario display_interface include module pwm0
  681.  
  682. [260] [LK_DDP/ddp_manager] scenario display_interface include module dsi0
  683.  
  684. [260] [DISPCHECK]dpmgr create path SUCCESS(0x41e55f40)
  685.  
  686. [260] [LK_DDP/ddp_manager]set dst module on scenario display_interface, module dsi0
  687.  
  688. [260] [LK_DDP/ddp_path]ddp_set_dst_module, scenario=display_interface, dst_module=dsi0
  689.  
  690. [260] [LK_DDP/ddp_path]dsi0 is already on path
  691.  
  692. [260] [DISPCHECK]dpmgr set dst module FINISHED(dsi0 )
  693.  
  694. [260] [LK_DDP/ddp_manager]path set lcm drv handle 0x41e55f40
  695.  
  696. [260] [LK_DDP/ddp_manager]dsi0 set lcm utils
  697.  
  698. lcm_set_util_funcs 217
  699.  
  700. [260] [LK_DDP/ddp_manager]path init on scenario display_interface
  701.  
  702. [260] [LK_DDP/ddp_path]ddp path m4u off
  703.  
  704. [260] [LK_DDP/ddp_path]ddp path top clock on
  705.  
  706. [260] [LK_DDP/INFO]enable smi clk, CG0 0xfffffffc, CG1 0xfffffffc, dummy CON = 0xfffffffc
  707.  
  708. [260] [LK_DDP/INFO]enable mutex clk, CG0 0xfffffffc, CG1 0xfffffffc, dummy CON = 0xfffffffc
  709.  
  710. [280] [LK_DDP/ddp_path]ddp CG:fffffffc
  711.  
  712. [280] [LK_DDP/ddp_path]mutex sof: dsi0 dst module dsi0 :vido_mode
  713.  
  714. [280] [LK_DDP/ddp_path]module ovl0 added to mutex 0
  715.  
  716. [280] [LK_DDP/ddp_path]module color0 added to mutex 0
  717.  
  718. [280] [LK_DDP/ddp_path]module ccorr added to mutex 0
  719.  
  720. [280] [LK_DDP/ddp_path]module aal added to mutex 0
  721.  
  722. [280] [LK_DDP/ddp_path]module gamma added to mutex 0
  723.  
  724. [280] [LK_DDP/ddp_path]module dither added to mutex 0
  725.  
  726. [280] [LK_DDP/ddp_path]module rdma0 added to mutex 0
  727.  
  728. [280] [LK_DDP/ddp_path]module pwm0 added to mutex 0
  729.  
  730. [280] [LK_DDP/ddp_path]mutex 0 value=0x2f940, sof=dsi0
  731.  
  732. [280] [LK_DDP/ddp_path]path connect on scenario display_interface
  733.  
  734. [280] [LK_DDP/ddp_path]connect_path: ovl0 to dsi0
  735.  
  736. [280] [LK_DDP/ddp_path]connect mout ovl0 to color0 value 0x1
  737.  
  738. [280] [LK_DDP/ddp_path]connect mout dither to rdma0 value 0x1
  739.  
  740. [280] [LK_DDP/ddp_path]connect out_s rdma0 to dsi0 , bits=0x2
  741.  
  742. [300] [LK_DDP/ddp_path]connect in_s ovl0 to color0 , bits=0x1
  743.  
  744. [300] [LK_DDP/ddp_path]connect in_s rdma0 to dsi0 , bits=0x1
  745.  
  746. [300] [LK_DDP/ddp_manager]scenario display_interface init module ovl0
  747.  
  748. [300] [LK_DDP/INFO]enable ovl0 clk, CG0 0xfffffbfc, CG1 0xfffffffc, dummy CON = 0xfffffbfc
  749.  
  750. [300] [LK_DDP/OVL]OVL0Init open CG 0xfffffbfc
  751.  
  752. [300] [LK_DDP/ddp_manager]scenario display_interface init module color0
  753.  
  754. [300] [LK_DDP/INFO]enable color0 clk, CG0 0xffffbbfc, CG1 0xfffffffc, dummy CON = 0xffffbbfc
  755.  
  756. [300] [LK_DDP/ddp_manager]scenario display_interface init module aal
  757.  
  758. [300] [LK_DDP/INFO]enable aal clk, CG0 0xfffebbfc, CG1 0xfffffffc, dummy CON = 0xfffebbfc
  759.  
  760. [300] [LK_DDP/ddp_manager]scenario display_interface init module gamma
  761.  
  762. [300] [LK_DDP/INFO]enable gamma clk, CG0 0xfffcbbfc, CG1 0xfffffffc, dummy CON = 0xfffcbbfc
  763.  
  764. [300] [LK_DDP/ddp_manager]scenario display_interface init module rdma0
  765.  
  766. [310] [LK_DDP/INFO]enable rdma0 clk, CG0 0xfffcb3fc, CG1 0xfffffffc, dummy CON = 0xfffcb3fc
  767.  
  768. [320] [LK_DDP/RDMA]RDMA0Init CG 0xfffcb3fc
  769.  
  770. [320] [LK_DDP/ddp_manager]scenario display_interface init module dsi0
  771.  
  772. [320] [DISP]func|ddp_dsi_init
  773.  
  774. [320] [LK_DDP/INFO]enable dsi0 clk, CG0 0xfffcb3fc, CG1 0xfffffff0, dummy CON = 0xfffcb3fc
  775.  
  776. [320] [DISPCHECK]dsi0 init finished
  777.  
  778. [320] [LK_DDP/ddp_manager]path config ovl 0, rdma 0, wdma 0, dst 1 on handle 0x41e55f40 scenario display_interface
  779.  
  780. [320] [LK_DDP/ddp_manager]scenario display_interface config module ovl0
  781.  
  782. [320] [LK_DDP/ddp_manager]scenario display_interface config module color0
  783.  
  784. [320] [LK_DDP/ddp_manager]scenario display_interface config module aal
  785.  
  786. [320] [LK_DDP/ddp_manager]scenario display_interface config module gamma
  787.  
  788. [320] [LK_DDP/ddp_manager]scenario display_interface config module dither
  789.  
  790. [320] [LK_DDP/DITHER]error:[DITHER] invalid dither bpp = 0
  791.  
  792. [340] [LK_DDP/ddp_manager]scenario display_interface config module rdma0
  793.  
  794. [340] [LK_DDP/RDMA]FIFO_VALID_Size = 0x020 = 32
  795.  
  796. [340] [LK_DDP/RDMA]ultra_low_level = 0x06b = 107
  797.  
  798. [340] [LK_DDP/RDMA]pre_ultra_low_level = 0x05f = 95
  799.  
  800. [340] [LK_DDP/RDMA]pre_ultra_high,fbk_sel: 0, rg_bir: 0
  801.  
  802. [350] [DISPCHECK][DDPDSI] rg_bic: 0, rg_bp: 0, PLL_CLOCK: 214, dsi_clock: 0, ssc_range: 0, ssc_disable: 1, compatibility_for_nvk: 0, cont_clock: 0
  803.  
  804. [360] [DISPCHECK][DDPDSI] lcm_ext_te_enable: 0, noncont_clock: 0, noncont_clock_period: 0
  805.  
  806. [360] [DISP]func|DSI_PHY_clk_setting
  807.  
  808. [360] [DISP][mipitx/reg]0x14018044=0x88492481
  809.  
  810. [360] [DISP][mipitx/reg]0x14018044=0x88492483
  811.  
  812. [360] [DISP][mipitx/reg]0x14018040=0x00000082
  813.  
  814. [360] [DISP][mipitx/reg]0x14018000=0x00000402
  815.  
  816. [360] [DISP][mipitx/reg]0x14018000=0x00000403
  817.  
  818. [360] [DISP][mipitx/reg]0x14018068=0x00000003
  819.  
  820. [360] [DISP][mipitx/reg]0x14018068=0x00000101
  821.  
  822. [360] [DISP][mipitx/reg]0x14018050=0x00000008
  823.  
  824. [360] [DISP][mipitx/reg]0x14018050=0x00000008
  825.  
  826. [360] [DISP][mipitx/reg]0x14018050=0x00000008
  827.  
  828. [360] [DISP][mipitx/reg]0x14018054=0x00000003
  829.  
  830. [360] [DISP][mipitx/reg]0x14018058=0x41000000
  831.  
  832. [360] [DISP][mipitx/reg]0x14018058=0x41d80000
  833.  
  834. [360] [DISP][mipitx/reg]0x14018058=0x41d89d00
  835.  
  836. [380] [DISP][mipitx/reg]0x14018058=0x41d89d89
  837.  
  838. [380] [DISP][mipitx/reg]0x14018054=0x00000003
  839.  
  840. [380] [DISP][mipitx/reg]0x14018004=0x00000821
  841.  
  842. [380] [DISP][mipitx/reg]0x14018008=0x00000401
  843.  
  844. [380] [DISP][mipitx/reg]0x1401800c=0x00000101
  845.  
  846. [380] [DISP][mipitx/reg]0x14018010=0x00000101
  847.  
  848. [380] [DISP][mipitx/reg]0x14018014=0x00000101
  849.  
  850. [380] [DISP][mipitx/reg]0x14018050=0x00000009
  851.  
  852. [380] [DISP][mipitx/reg]0x14018060=0x00000000
  853.  
  854. [380] [DISP][mipitx/reg]0x14018060=0x00000001
  855.  
  856. [380] [DISP][mipitx/reg]0x14018040=0x00000082
  857.  
  858. [380] DISP/[DISP] - kernel - DSI_PHY_TIMCONFIG, Cycle Time = 19(ns), Unit Interval = 3(ns). , lane# = 4
  859.  
  860. [380] DISP/[DISP] - kernel - DSI_PHY_TIMCONFIG, HS_TRAIL = 20, HS_ZERO = 8, HS_PRPR = 4, LPX = 4, TA_GET = 20, TA_SURE = 6, TA_GO = 16, CLK_TRAIL = 6, CLK_ZERO = 21, CLK_HS_PRPR = 3
  861.  
  862. [380] DSI_PHY_TIMCONFIG, 0x14080404,0x08140610,0x06150100,0x00081a03
  863.  
  864. [380] [DISP]func|_display_interface_path_deinit
  865.  
  866. [400] [LK_DDP/ddp_manager]path deinit on scenario display_interface
  867.  
  868. [400] [LK_DDP/ddp_path]mutex 0 clear
  869.  
  870. [400] [LK_DDP/ddp_path]path disconnect on scenario display_interface
  871.  
  872. [400] [LK_DDP/ddp_path]disconnect_path: ovl0 to dsi0
  873.  
  874. [400] [LK_DDP/ddp_path]disconnect mout ovl0 to color0
  875.  
  876. [400] [LK_DDP/ddp_path]disconnect mout dither to rdma0
  877.  
  878. [400] [LK_DDP/ddp_manager]scenario display_interface deinit module ovl0
  879.  
  880. [400] [LK_DDP/OVL]OVL0DeInit close CG
  881.  
  882. [400] [LK_DDP/INFO]disable ovl0 clk, CG0 0xfffcb7fc, CG1 0xfffffff0,dummy CON = 0xfffcb7fc
  883.  
  884. [400] [LK_DDP/ddp_manager]scenario display_interface deinit module color0
  885.  
  886. [400] [LK_DDP/INFO]disable color0 clk, CG0 0xfffcf7fc, CG1 0xfffffff0,dummy CON = 0xfffcf7fc
  887.  
  888. [400] [LK_DDP/ddp_manager]scenario display_interface deinit module aal
  889.  
  890. [400] [LK_DDP/INFO]disable aal clk, CG0 0xfffdf7fc, CG1 0xfffffff0,dummy CON = 0xfffdf7fc
  891.  
  892. [400] [LK_DDP/ddp_manager]scenario display_interface deinit module gamma
  893.  
  894. [420] [LK_DDP/INFO]disable gamma clk, CG0 0xfffff7fc, CG1 0xfffffff0,dummy CON = 0xfffff7fc
  895.  
  896. [420] [LK_DDP/ddp_manager]scenario display_interface deinit module rdma0
  897.  
  898. [420] [LK_DDP/RDMA]RDMA0Deinit
  899.  
  900. [420] [LK_DDP/INFO]disable rdma0 clk, CG0 0xfffffffc, CG1 0xfffffff0,dummy CON = 0xfffffffc
  901.  
  902. [420] [LK_DDP/ddp_manager]scenario display_interface deinit module dsi0
  903.  
  904. [420] [DISPCHECK]dsi0 init finished
  905.  
  906. [420] [LK_DDP/INFO]disable dsi0 clk, CG0 0xfffffffc, CG1 0xfffffffc,dummy CON = 0xfffffffc
  907.  
  908. [420] [DISP][mipitx/reg]0x14018084=0x00000001
  909.  
  910. [420] [DISP][mipitx/reg]0x14018084=0x00000003
  911.  
  912. [420] [DISP][mipitx/reg]0x14018084=0x00000013
  913.  
  914. [420] [DISP][mipitx/reg]0x14018084=0x00000033
  915.  
  916. [420] [DISP][mipitx/reg]0x14018084=0x00000033
  917.  
  918. [420] [DISP][mipitx/reg]0x14018084=0x00000033
  919.  
  920. [420] [DISP][mipitx/reg]0x14018084=0x00000133
  921.  
  922. [420] [DISP][mipitx/reg]0x14018084=0x00000333
  923.  
  924. [440] [DISP][mipitx/reg]0x14018084=0x00010333
  925.  
  926. [440] [DISP][mipitx/reg]0x14018084=0x00020333
  927.  
  928. [440] [DISP][mipitx/reg]0x14018084=0x00100333
  929.  
  930. [440] [DISP][mipitx/reg]0x140[LK_DDP/ddp_path]disconnect mout dither to rdma0
  931.  
  932. [470] [DISPCHECK]******** dump lcm driver information ********
  933.  
  934. [480] [DISPCHECK][LCM], name: hx8394f_hd720_dsi_vdo_lide
  935.  
  936. [480] [DISPCHECK][LCM] resolution: 720 x 1280
  937.  
  938. [480] [DISPCHECK][LCM] physical size: 0 x 0
  939.  
  940. [480] [DISPCHECK][LCM] physical size: 0 x 0
  941.  
  942. [480] [DISPCHECK][LCM] lcm_if:0, cmd_if:0
  943.  
  944. [480] [DISPCHECK][LCM] interface: unknown
  945.  
  946. [480] [DISPCHECK][LCM] Type: DSI
  947.  
  948. [480] [DISPCHECK][LCM] DSI Mode: BURST_VDO_MODE
  949.  
  950. [480] [DISPCHECK][LCM] LANE_NUM: 4,data_format: 0,vertical_sync_active: 0
  951.  
  952. [480] [DISPCHECK][LCM] vact: 6, vbp: 18, vfp: 20, vact_line: 1280, hact: 50, hbp: 80, hfp: 70, hblank: 0, hblank: 1105532160
  953.  
  954. [480] [DISPCHECK][LCM] pll_select: 0, pll_div1: 0, pll_div2: 0, fbk_div: 0,fbk_sel: 0, rg_bir: 0
  955.  
  956. [480] [DISPCHECK][LCM] rg_bic: 0, rg_bp: 0, PLL_CLOCK: 214, dsi_clock: 0, ssc_range: 0, ssc_disable: 1, compatibility_for_nvk: 0, cont_clock: 0
  957.  
  958. [480] [DISPCHECK][LCM] lcm_ext_te_enable: 0, noncont_clock: 0, noncont_clock_period: 0
  959.  
  960. [500] [DISP]lcm handle is null, after probe:0x41e564ac
  961.  
  962. [500] [DISP]^^ DISP_GetVRamSize: 13172736 bytes
  963.  
  964. [500] warning: size is not 2MB aligned
  965.  
  966. [500] mblock[0].start: 0x40000000, sz: 0x40000000, limit: 0x100000000, max_addr: 0x0, max_rank: 1, target: -1, mblock[].rank: 0
  967.  
  968. [500] mblock_reserve dbg[0]: 1, 1, 1, 1
  969.  
  970. [500] mblock[1].start: 0x80000000, sz: 0x3ffc0000, limit: 0x100000000, max_addr: 0x80000000, max_rank: 1, target: 0, mblock[].rank: 1
  971.  
  972. [500] mblock_reserve dbg[1]: 1, 1, 1, 1
  973.  
  974. [500] mblock_reserve: bf330000 - bffc0000 from mblock 1
  975.  
  976. [500] FB base = 0xbf330000, FB size = 13172736
  977.  
  978. [500] fb_va: 0xbf330000, fb_pa: 0xbf330000, fb_pa_k: 0xbf330000
  979.  
  980. [500] [DISP]func|primary_display_init
  981.  
  982. [500] [LK_DDP/ddp_manager]ddp manager init
  983.  
  984. [LK_ENV]get_env DFO
  985.  
  986. [500] [DISP]env buffer = <null>
  987.  
  988. [500] [DISP]env buffer = NULL
  989.  
  990. [500] [DISP]LCM_FAKE_WIDTH = [DEC]0 [HEX]0x00000000
  991.  
  992. [500] [DISP]LCM_FAKE_HEIGHT = [DEC]0 [HEX]0x00000000
  993.  
  994. [520] [DISP]LCM Resolution will be changed, original: 720x1280, now: 0x0
  995.  
  996. [520] [DISP]ERROR:Invalid resolution: 0x0
  997.  
  998. [520] [DISP]ERROR:[DISP_DFO]WARNING!!! Change LCM Resolution FAILED!!!
  999.  
  1000. [520] [DISPCHECK]disp_lcm_probe SUCCESS
  1001.  
  1002. [520] [DISP]func|disp_lcm_get_params
  1003.  
  1004. [520] [DISP]func|_build_path_direct_link
  1005.  
  1006. [520] [LK_DDP/ddp_manager]scenario primary_disp acquire mutex 0 , left mutex 0x1e!
  1007.  
  1008. [520] [LK_DDP/ddp_manager]assign default irqs table index 0
  1009.  
  1010. [520] [LK_DDP/ddp_manager]create handle 0x41e55f40 on scenario primary_disp
  1011.  
  1012. [520] [LK_DDP/ddp_manager] scenario primary_disp include module ovl0
  1013.  
  1014. [520] [LK_DDP/ddp_manager] scenario primary_disp include module color0
  1015.  
  1016. [520] [LK_DDP/ddp_manager] scenario primary_disp include module ccorr
  1017.  
  1018. [520] [LK_DDP/ddp_manager] scenario primary_disp include module aal
  1019.  
  1020. [520] [LK_DDP/ddp_manager] scenario primary_disp include module gamma
  1021.  
  1022. [530] [LK_DDP/ddp_manager] scenario primary_disp include module dither
  1023.  
  1024. [540] [LK_DDP/ddp_manager] scenario primary_disp include module rdma0
  1025.  
  1026. [540] [LK_DDP/ddp_manager] scenario primary_disp include module pwm0
  1027.  
  1028. [540] [LK_DDP/ddp_manager] scenario primary_disp include module dsi0
  1029.  
  1030. [540] [DISPCHECK]dpmgr create path SUCCESS(0x41e55f40)
  1031.  
  1032. [540] [LK_DDP/ddp_manager]set dst module on scenario primary_disp, module dsi0
  1033.  
  1034. [540] [LK_DDP/ddp_path]ddp_set_dst_module, scenario=primary_disp, dst_module=dsi0
  1035.  
  1036. [540] [LK_DDP/ddp_path]dsi0 is already on path
  1037.  
  1038. [540] [DISPCHECK]dpmgr set dst module FINISHED(dsi0 )
  1039.  
  1040. [540] [LK_DDP/ddp_manager]path set lcm drv handle 0x41e55f40
  1041.  
  1042. [540] [LK_DDP/ddp_manager]dsi0 set lcm utils
  1043.  
  1044. lcm_set_util_funcs 217
  1045.  
  1046. [540] [DISPCHECK]primary display is DIRECT LINK MODE
  1047.  
  1048. [540] [DISPCHECK]primary display BUILD cmdq trigger loop finished
  1049.  
  1050. [540] [DISPCHECK]primary display START cmdq trigger loop finished
  1051.  
  1052. [560] [DISP]func|disp_lcm_is_video_mode
  1053.  
  1054. [560] [LK_DDP/ddp_manager]set scenario primary_disp mode Video Mode
  1055.  
  1056. [560] [LK_DDP/ddp_managerary_disp init module color0
  1057.  
  1058. [580] [LK_DDP/INFO]enable color0 clk, CG0 0xffffbbfc, CG1 0xfffffffc, dummy CON = 0xffffbbfc
  1059.  
  1060. [600] [LK_DDP/ddp_manager]scenario primary_disp init module aal
  1061.  
  1062. [600] [LK_DDP/INFO]enable aal clk, CG0 0xfffebbfc, CG1 0xfffffffc, dummy CON = 0xfffebbfc
  1063.  
  1064. [600] [LK_DDP/ddp_manager]scenario primary_disp init module gamma
  1065.  
  1066. [600] [LK_DDP/INFO]enable gamma clk, CG0 0xfffcbbfc, CG1 0xfffffffc, dummy CON = 0xfffcbbfc
  1067.  
  1068. [600] [LK_DDP/ddp_manager]scenario primary_disp init module rdma0
  1069.  
  1070. [600] [LK_DDP/INFO]enable rdma0 clk, CG0 0xfffcb3fc, CG1 0xfffffffc, dummy CON = 0xfffcb3fc
  1071.  
  1072. [600] [LK_DDP/RDMA]RDMA0Init CG 0xfffcb3fc
  1073.  
  1074. [600] [LK_DDP/ddp_manager]scenario primary_disp init module dsi0
  1075.  
  1076. [600] [DISP]func|ddp_dsi_init
  1077.  
  1078. [600] [LK_DDP/INFO]enable dsi0 clk, CG0 0xfffcb3fc, CG1 0xfffffff0, dummy CON = 0xfffcb3fc
  1079.  
  1080. [600] [DISPCHECK]dsi0 init finished
  1081.  
  1082. [600] [LK_DDP/ddp_manager]path config ovl 0, rdma 0, wdma 0, dst 1 on handle 0x41e55f40 scenario primary_disp
  1083.  
  1084. [600] [LK_DDP/ddp_manager]scenario primary_disp config module ovl0
  1085.  
  1086. [620] [LK_DDP/ddp_manager]scenario primary_disp config module color0
  1087.  
  1088. [620] [LK_DDP/ddp_manager]scenario primary_disp config module aal
  1089.  
  1090. [620] [LK_DDP/ddp_manager]scenario primary_disp config module gamma
  1091.  
  1092. [620] [LK_DDP/ddp_manager]scenario primary_disp config module dither
  1093.  
  1094. [620] [LK_DDP/ddp_manager]scenario primary_disp config module rdma0
  1095.  
  1096. [620] [LK_DDP/RDMA]FIFO_VALID_Size = 0x020 = 32
  1097.  
  1098. [620] [LK_DDP/RDMA]ultra_low_level = 0x06b = 107
  1099.  
  1100. [620] [LK_DDP/RDMA]pre_ultra_low_level = 0x05f = 95
  1101.  
  1102. [620] [LK_DDP/RDMA]pre_ultra_high_level = 0x06b = 107
  1103.  
  1104. [620] [LK_DDP/RDMA]ultra_high_ofs = 0x001 = 1
  1105.  
  1106. [620] [LK_DDP/RDMA]pre_ultra_low_ofs = 0x0a0 = 160
  1107.  
  1108. [620] [LK_DDP/RDMA]pre_ultra_high_ofs = 0x001 = 1
  1109.  
  1110. [620] [LK_DDP/ddp_manager]scenario primary_disp config module dsi0
  1111.  
  1112. [620] [DISP]func|ddp_dsi_config
  1113.  
  1114. [620] [DISPCHECK][DDPDSI] DSI Mode: BURST_VDO_MODE
  1115.  
  1116. [620] [DISPCHECK][DDPDSI] LANE_NUM: 4,data_format: 0,vertical_sync_active: 0
  1117.  
  1118. [640] [DISPCHECK][DDPDSI] vact: 6, vbp: 18, vfp: 20, vact_line: 1280, hact: 50, hbp: 80, hfp: 70, hblank: 0, hblank: 1105599628
  1119.  
  1120. [640] [DISPCHECK][DDPDSI] pll_select: 0, pll_div1: 0, pll_div2: 0, fbk_div: 0,fbk_sel: 0, rg_bir: 0
  1121.  
  1122. [640] [DISPCHECK][DDPDSI] rg_bic: 0, rg_bp: 0, PLL_CLOCK: 214, dsi_clock: 0, ssc_range: 0, ssc_disable: 1, compatibility_for_nvk: 0, cont_clock: 0
  1123.  
  1124. [640] [DISPCHECK][DDPDSI] lcm_ext_te_enable: 0, noncont_clock: 0, noncont_clock_period: 0
  1125.  
  1126. [640] [DISP]func|DSI_PHY_clk_setting
  1127.  
  1128. [640] [DISP][mipitx/reg]0x14018044=0x88492481
  1129.  
  1130. [640] [DISP][mipitx/reg]0x14018044=0x88492483
  1131.  
  1132. [640] [DISP][mipitx/reg]0x14018040=0x00000882
  1133.  
  1134. [640] [DISP][mipitx/reg]0x14018000=0x00000402
  1135.  
  1136. [640] [DISP][mipitx/reg]0x14018000=0x00000403
  1137.  
  1138. [640] [DISP][mipitx/reg]0x14018068=0x00000003
  1139.  
  1140. [640] [DISP][mipitx/reg]0x14018068=0x00000101
  1141.  
  1142. [640] [DISP][mipitx/reg]0x14018050=0x00000008
  1143.  
  1144. [660] [DISP][mipitx/reg]0x14018050=0x00000008
  1145.  
  1146. [660] [DISP][mipitx/reg]0x14018050=0x00000008
  1147.  
  1148. [660] [DISP][mipitx/reg]0x14018054=0x00000001
  1149.  
  1150. [660] [DISP][mipitx/reg]0x14018058=0x41000000
  1151.  
  1152. [660] [DISP][mipitx/reg]0x14018058=0x41d80000
  1153.  
  1154. [660] [DISP][mipitx/reg]0x14018058=0x41d89d00
  1155.  
  1156. [660] [DISP][mipitx/reg]0x14018058=0x41d89d89
  1157.  
  1158. [660] [DISP][mipitx/reg]0x14018054=0x00000001
  1159.  
  1160. [660] [DISP][mipitx/reg]0x14018004=0x00000821
  1161.  
  1162. [660] [DISP][mipitx/reg]0x14018008=0x00000401
  1163.  
  1164. [660] [DISP][mipitx/reg]0x1401800c=0x00000101
  1165.  
  1166. [660] [DISP][mipitx/reg]0x14018010=0x00000101
  1167.  
  1168. [660] [DISP][mipitx/reg]0x14018014=0x00000101
  1169.  
  1170. [660] [DISP][mipitx/reg]0x14018050=0x00000009
  1171.  
  1172. [660] [DISP][mipitx/reg]0x14018060=0x00000000
  1173.  
  1174. [660] [DISP][mipitx/reg]0x14018060=0x00000001
  1175.  
  1176. [660] [DISP][mipitx/reg]0x14018040=0x00000082
  1177.  
  1178. [660] DISP/[DISP] - kernel - DSI_PHY_TIMCONFIG, Cycle Time = 19(ns), Unit Interval = 3(ns). , lane# = 4
  1179.  
  1180. [680] DISP/[DISP] - kernel - DSI_PHY_TIMCONFIG, HS_TRAIL = 20, HS_ZERO =
  1181. push_table 188
  1182.  
  1183. [980] [DISP][DSI] start: 0x00042902
  1184.  
  1185. [980] [DISP][DSI] cmd: 0x9483ffb9
  1186.  
  1187. [980] [DISP][DSI] size: 0x00000002
  1188.  
  1189. [980] [DISP][DSI] start: 0x00072902
  1190.  
  1191. [980] [DISP][DSI] cmd: 0x680363ba
  1192.  
  1193. [980] [DISP][DSI] size: 0x00000003
  1194.  
  1195. [980] [DISP][DSI] start: 0x000b2902
  1196.  
  1197. [980] [DISP][DSI] cmd: 0x721250b1
  1198.  
  1199. [980] [DISP][DSI] cmd: 0x71113009
  1200.  
  1201. [980] [DISP][DSI] size: 0x00000004
  1202.  
  1203. [980] [DISP][DSI] start: 0x00072902
  1204.  
  1205. [980] [DISP][DSI] cmd: 0x648000b2
  1206.  
  1207. [980] [DISP][DSI] size: 0x00000003
  1208.  
  1209. [980] [DISP][DSI] start: 0x00162902
  1210.  
  1211. [980] [DISP][DSI] cmd: 0x037903b4
  1212.  
  1213. [980] [DISP][DSI] cmd: 0x01510351
  1214.  
  1215. [980] [DISP][DSI] cmd: 0x00357e05
  1216.  
  1217. [980] [DISP][DSI] cmd: 0x0379033f
  1218.  
  1219. [980] [DISP][DSI] cmd: 0x05510351
  1220.  
  1221. [980] [DISP][DSI] size: 0x00000007
  1222.  
  1223. [980] [DISP][DSI] start: 0x00032902
  1224.  
  1225. [980] [DISP][DSI] size: 0x00000002
  1226.  
  1227. [980] [DISP][DSI] start: 0x00222902
  1228.  
  1229. [1000] [DISP][DSI] cmd: 0x0f0000d3
  1230.  
  1231. [1000] [DISP][DSI] cmd: 0x082f010f
  1232.  
  1233. [1000] [DISP][DSI] cmd: 0x0b103200
  1234.  
  1235. [1000] [DISP][DSI] cmd: 0x15320b00
  1236.  
  1237. [1000] [DISP][DSI] cmd: 0x32070507
  1238.  
  1239. [1000] [DISP][DSI] cmd: 0x00000010
  1240.  
  1241. [1000] [DISP][DSI] cmd: 0x0b0b3337
  1242.  
  1243. [1000] [DISP][DSI] cmd: 0x07071037
  1244.  
  1245. [1000] [DISP][DSI] size: 0x0000000a
  1246.  
  1247. [1000] [DISP][DSI] start: 0x002d2902
  1248.  
  1249. [1000] [DISP][DSI] cmd: 0x181818d5
  1250.  
  1251. [1000] [DISP][DSI] cmd: 0x18181818
  1252.  
  1253. [1000] [DISP][DSI] cmd: 0x18181818
  1254.  
  1255. [1000] [DISP][DSI] cmd: 0x18181818
  1256.  
  1257. [1000] [DISP][DSI] cmd: 0x18181818
  1258.  
  1259. [1000] [DISP][DSI] cmd: 0x02181818
  1260.  
  1261. [1000] [DISP][DSI] cmd: 0x00181803
  1262.  
  1263. [1000] [DISP][DSI] cmd: 0x04070601
  1264.  
  1265. [1000] [DISP][DSI] cmd: 0x22212005
  1266.  
  1267. [1000] [DISP][DSI] cmd: 0x18181823
  1268.  
  1269. [1000] [DISP][DSI] cmd: 0x18181818
  1270.  
  1271. [1000] [DISP][DSI] size: 0x0000000d
  1272.  
  1273. [1000] [DISP][DSI] start: 0x0bcc2300
  1274.  
  1275. [1000] [DISP][DSI] size: 0x00000001
  1276.  
  1277. [1000] [DISP][DSI] start: 0x003b2902
  1278.  
  1279. [1020] [DISP][DSI] cmd: 0x52504fe0
  1280.  
  1281. [1020] [DISP][DSI] cmd: 0x57565455
  1282.  
  1283. [1020] [DISP][DSI] cmd: 0xb6aca353
  1284.  
  1285. [1020] [DISP][DSI] cmd: 0xbabaafb0
  1286.  
  1287. [1020] [DISP][DSI] cmd: 0xb9bfc1b8
  1288.  
  1289. [1020] [DISP][DSI] cmd: 0x6466d1c4
  1290.  
  1291. [1020] [DISP][DSI] cmd: 0x7c6e6b68
  1292.  
  1293. [1020] [DISP][DSI] cmd: 0x504f7f7f
  1294.  
  1295. [1020] [DISP][DSI] cmd: 0x56545552
  1296.  
  1297. [1020] [DISP][DSI] cmd: 0xaca35357
  1298.  
  1299. [1020] [DISP][DSI] cmd: 0xbaafb0b6
  1300.  
  1301. [1020] [DISP][DSI] cmd: 0xbfc1b8ba
  1302.  
  1303. [1020] [DISP][DSI] cmd: 0x66d1c4b9
  1304.  
  1305. [1020] [DISP][DSI] cmd: 0x6e6b6864
  1306.  
  1307. [1020] [DISP][DSI] size: 0x00000010
  1308.  
  1309. [1020] [DISP][DSI] start: 0x00032902
  1310.  
  1311. [1020] [DISP][DSI] size: 0x00000002
  1312.  
  1313. [1020] [DISP][DSI] start: 0x02d42300
  1314.  
  1315. [1020] [DISP][DSI] size: 0x00000001
  1316.  
  1317. [1020] [DISP][DSI] start: 0x01bd2300
  1318.  
  1319. [1020] [DISP][DSI] size: 0x00000001
  1320.  
  1321. [1020] [DISP][DSI] start: 0x60b12300
  1322.  
  1323. [1020] [DISP][DSI] size: 0x00000001
  1324.  
  1325. [1020] [DISP][DSI] start: 0x00bd2300
  1326.  
  1327. [1020] [DISP][DSI] size: 0x00000001
  1328.  
  1329. [1040] [DISP][DSI] start: 0x00082902
  1330.  
  1331. [1040] [DISP][DSI] cmd: 0x508140bf
  1332.  
  1333. [1040] [DISP][DSI] cmd: 0x01fc1a00
  1334.  
  1335. [1040] [DISP][DSI] size: 0x00000003
  1336.  
  1337. [1040] [DISP][DSI] start: 0x00110500
  1338.  
  1339. [1040] [DISP][DSI] size: 0x00000001
  1340.  
  1341. [1420] [DISP][DSI] start: 0x00290500
  1342.  
  1343. [1420] [DISP][DSI] size: 0x00000001
  1344.  
  1345. [1700] [DISP]func|DSI_set_cmdq
  1346.  
  1347. [1700] [DISPCHECK]DSI_set_cmdq, module=dsi0 , cmdq=0x00000000
  1348.  
  1349. [1700] [DISP] - kernel - DSI_set_cmdq. DSI_CMDQ+0000 : 0x00013700
  1350.  
  1351. [1700] [DISP]read lcm maximum return size failed.
  1352.  
  1353. [1720] [DISP]func|DSI_dcs_read_lcm_reg_v2
  1354.  
  1355. [1720] DISP/ Start polling DSI read ready!!!
  1356.  
  1357. [1720] DISP/ End polling DSI read ready!!!
  1358.  
  1359. [1720] [DISP]DSI_CMDQ_SIZE : 0x1
  1360.  
  1361. [1720] [DISP]DSI_CMDQ_DATA0 : 0x4
  1362.  
  1363. [1720] [DISP]DSI_CMDQ_DATA1 : 0x6
  1364.  
  1365. [1720] [DISP]DSI_CMDQ_DATA2 : 0xa
  1366.  
  1367. [1720] [DISP]DSI_CMDQ_DATA3 : 0x0
  1368.  
  1369. [1720] [DISP]DSI_RX_DATA0 : 0xa00011c
  1370.  
  1371. [1720] [DISP]DSI_RX_DATA1 : 0xd56a1c
  1372.  
  1373. [1720] [DISP]DSI_RX_DATA2 : 0x0
  1374.  
  1375. [1720] [DISP]DSI_RX_DATA3 : 0x0
  1376.  
  1377. [1720] [DISP]read_data0, 1c,1,0,a
  1378.  
  1379. [1720] [DISP]read_data1, 1c,6a,d5,0
  1380.  
  1381. [1720] [DISP]read_data2, 0,0,0,0
  1382.  
  1383. [1720] [DISP]read_data3, 0,0,0,0
  1384.  
  1385. [1720] DISP/ DSI read packet_type is 0x1c
  1386.  
  1387. [1720] DISP/ DSI read long packet size: 1
  1388.  
  1389. [1720] [DISP]lcm is connected
  1390.  
  1391. [1720] [DISP]func|disp_lcm_is_video_mode
  1392.  
  1393. [1720] [LK_DDP/ddp_manager]map event 7 to irq 0x20004 on scenario primary_disp
  1394.  
  1395. [1720] [LK_DDP/ddp_manager]enable event on scenario primary_disp, event 7, irtbit 0x20004
  1396.  
  1397. [1740] [LK_DDP/ddp_manager]enable event on scenario primary_disp, event 1, irtbit 0x20004
  1398.  
  1399. [1740] [DISP]func|primary_display_config_input
  1400.  
  1401. [1740] [LK_DDP/ddp_manager]path check busy on scenario primary_disp
  1402.  
  1403. [1740] [DISP]func|ddp_dsi_is_busy
  1404.  
  1405. [1740] [LK_DDP/ddp_manager]path config ovl 1, rdma 0, wdma 0, dst 0 on handle 0x41e55f40 scenario primary_disp
  1406.  
  1407. [1740] [LK_DDP/ddp_manager]scenario primary_disp config module ovl0
  1408.  
  1409. [1740] [LK_DDP/OVL]module 0, layer=3, en=1, src=0, fmt=16785442, addr=0xbf6c8000, x=0, y=0, pitch=2880, dst(0, 0, 720, 1280),keyEn=0, key=0, aen=1, alpha=255
  1410.  
  1411. [1760] [LK_DDP/OVL]ovl0, layer=3, source=memory, off(x=0, y=0), dst(0, 0, 720, 1280),pitch=2880,fmt=eRGBA8888, addr=bf6c8000, keyEn=0, key=0, aen=1, alpha=255
  1412.  
  1413. [1760] [LK_DDP/ddp_manager]scenario primary_disp config module color0
  1414.  
  1415. [1760] [LK_DDP/ddp_manager]scenario primary_disp config module aal
  1416.  
  1417. [1760] [LK_DDP/ddp_manager]scenario primary_disp config module gamma
  1418.  
  1419. [1760] [LK_DDP/ddp_manager]scenario primary_disp config module dither
  1420.  
  1421. [1760] [LK_DDP/ddp_manager]scenario primary_disp config module rdma0
  1422.  
  1423. [1760] [LK_DDP/ddp_manager]scenario primary_disp config module dsi0
  1424.  
  1425. [1760] [DISP]func|ddp_dsi_config
  1426.  
  1427. [1760] [DISP]func|primary_display_config_input
  1428.  
  1429. [1760] [LK_DDP/ddp_manager]path check busy on scenario primary_disp
  1430.  
  1431. [1760] [DISP]func|ddp_dsi_is_busy
  1432.  
  1433. [1760] [LK_DDP/ddp_manager]path config ovl 1, rdma 0, wdma 0, dst 0 on handle 0x41e55f40 scenario primary_disp
  1434.  
  1435. [1780] [LK_DDP/ddp_manager]scenario primary_disp config module ovl0
  1436.  
  1437. [1780] [LK_DDP/OVL]module 0, layer=0, en=1, src=0, fmt=16785442, addr=0xbf330000, x=0, y=0, pitch=2944, dst(0, 0, 720, 1280),keyEn=0, key=0, aen=1, alpha=255
  1438.  
  1439. [1780] [LK_DDP/OVL]ovl0, layer=0, source=memory, off(x=0, y=0), dst(0, 0, 720, 1280),pitch=2944,fmt=eRGBA8888, addr=bf330000, keyEn=0, key=0, aen=1, alpha=255
  1440.  
  1441. [1780] [LK_DDP/OVL]module 0, layer=3, en=1, src=0, fmt=16785442, addr=0xbf6c8000, x=0, y=0, pitch=2880, dst(0, 0, 720, 1280),keyEn=0, key=0, aen=1, alpha=255
  1442.  
  1443. [1780] [LK_DDP/OVL]ovl0, layer=3, source=memory, off(x=0, y=0), dst(0, 0, 720, 1280),pitch=2880,fmt=eRGBA8888, addr=bf6c8000, keyEn=0, key=0, aen=1, alpha=255
  1444.  
  1445. [1780] [LK_DDP/ddp_manager]scenario primary_disp config module color0
  1446.  
  1447. [1780] [LK_DDP/ddp_manager]scenario primary_disp config module aal
  1448.  
  1449. [1780] [LK_DDP/ddp_manager]scenario primary_disp config module gamma
  1450.  
  1451. [1800] [LK_DDP/ddp_manager]scenario primary_disp config module dither
  1452.  
  1453. [1800] [LK_DDP/ddp_manager]scenario primary_disp config module rdma0
  1454.  
  1455. [1800] [LK_DDP/ddp_manager]scenario primary_disp config module dsi0
  1456.  
  1457. [1800] [DISP]func|ddp_dsi_config
  1458.  
  1459. [1800] [lk logo: mt_disp_fill_rect 265]
  1460.  
  1461. [1800] [lk logo: init_fb_screen 59]
  1462.  
  1463. [1800] mt_get_logo_db_addr: 0xbef30000
  1464.  
  1465. [1800] [lk logo: init_fb_screen 77]MTK_LCM_PHYSICAL_ROTATION = 0
  1466.  
  1467. [1800] [lk logo: sync_anim_version 42]
  1468.  
  1469. [1800] [lk logo: init_fb_screen 100]pinfo[0]=0xffffffff, pinfo[1]=0x00000000, pinfo[2]=1245192
  1470.  
  1471. [1800] [lk logo: init_fb_screen 102]define ANIMATION_NEW:show new animation with capacity num
  1472.  
  1473. [1800] [lk logo: init_fb_screen 103]CAPACITY_LEFT =278, CAPACITY_TOP =556
  1474.  
  1475. [1800] [lk logo: init_fb_screen 104]LCM_HEIGHT=441, LCM_WIDTH=817
  1476.  
  1477. [1880] fb dump: 0x00000000, 0x00000000, 0x00000000, 0x00000000
  1478.  
  1479. [1880] [DISP]func|primary_display_trigger
  1480.  
  1481. [1880] [LK_DDP/ddp_manager]path check busy on scenario primary_disp
  1482.  
  1483. [1880] [DISP]func|ddp_dsi_is_busy
  1484.  
  1485. [1880] [DISPCHECK]trigger mode: DIRECT_LINK
  1486.  
  1487. [1880] [DISP]func|disp_lcm_is_video_mode
  1488.  
  1489. [1880] [LK_DDP/ddp_manager]path start on scenario primary_disp
  1490.  
  1491. [1880] [LK_DDP/ddp_manager]scenario primary_disp start module ovl0
  1492.  
  1493. [1880] [LK_DDP/ddp_manager]scenario primary_disp start module rdma0
  1494.  
  1495. [1880] [LK_DDP/ddp_manager]scenario primary_disp start module dsi0
  1496.  
  1497. [1880] [LK_DDP/ddp_manager]dpmgr_path_trigger on scenario primary_disp
  1498.  
  1499. [1880] [LK_DDP/ddp_path]mutex 0 enable
  1500.  
  1501. [1880] [LK_DDP/ddp_manager]dsi0 trigger
  1502.  
  1503. [1880] [LK_DDP/ddp_manager]check status on scenario primary_disp, module_num 9
  1504.  
  1505. [1890] [LK_DDP/ddp_path]path check path on scenario primary_disp
  1506.  
  1507. [1900] [LK_DDP/ddp_path]check_path: ovl0 to dsi0
  1508.  
  1509. [1900] [LK_DDP/ddp_path]path: ovl0 to dsi0 is connected
  1510.  
  1511. [1900] [LK_DDP/ddp_path]check mutex 0 on scenario primary_disp
  1512.  
  1513. [1900] [LK_DDP/ddp_path]mutex sof: dsi0 dst module dsi0 :vido_mode
  1514.  
  1515. [1900] [LK_DDP/OVL]==DISP OVL0 ANALYSIS==
  1516.  
  1517. [1900] [LK_DDP/OVL]ovl_en=1,layer_enable(1,0,0,1),bg(w=720, h=1280),cur_pos(x=41,y=331),layer_hit(1,0,0,1)
  1518.  
  1519. [1900] [LK_DDP/OVL]layer0: w=720,h=1280,off(x=0,y=0),pitch=2944,addr=0xbf330000,fmt=eRGBA8888, source=memory
  1520.  
  1521. [1900] [LK_DDP/OVL]ovl rdma0 status:(en 7667713)
  1522.  
  1523. [1900] [LK_DDP/OVL]layer3: w=720,h=1280,off(x=0,y=0),pitch=2880,addr=0xbf6c8000,fmt=eRGBA8888, source=memory
  1524.  
  1525. [1900] [LK_DDP/OVL]ovl rdma3 status:(en 7798785)
  1526.  
  1527. [1900] [LK_DDP/DUMP]==DISP COLOR0 ANALYSIS==
  1528.  
  1529. [1900] [LK_DDP/DUMP]color0: bypass=1, w=720, h=1280, pixel_cnt=0, line_cnt=0,
  1530.  
  1531. [1900] [LK_DDP/DUMP]ccorr: en=1, config=1, w=720, h=1280, in_p_cnt=74, in_l_cnt=782, out_p_cnt=112, out_l_cnt=782
  1532.  
  1533. [1920] [LK_DDP/DUMP]==DISP AAL ANALYSIS==
  1534.  
  1535. [1920] [LK_DDP/DUMP]aal: bypass=1, relay=1, en=0, w=720, h=1280
  1536.  
  1537. [1920] [LK_DDP/DUMP]==DISP GAMMA ANALYSIS==
  1538.  
  1539. [1920] [LK_DDP/DUMP]gamma: en=0, w=720, h=1280, in_p_cnt=1, in_l_cnt=1, out_p_cnt=1, out_l_cnt=1
  1540.  
  1541. [1920] [LK_DDP/DUMP]dither: en=1, config=2, w=720, h=1280, in_p_cnt=200, in_l_cnt=1082, out_p_cnt=231, out_l_cnt=1082
  1542.  
  1543. [1920] [LK_DDP/RDMA]==DISP RDMA0 ANALYSIS==
  1544.  
  1545. [1920] [LK_DDP/RDMA]rdma0: en=1, w=720, h=1280, pitch=0, addr=0x0, fmt=rgb565, fifo_min=13, in_p_cnt=233, in_l_cnt=1215, out_p_cnt=328, out_l_cnt=1213
  1546.  
  1547. [1920] [LK_DDP/DUMP]==DISP PWM0 ANALYSIS==
  1548.  
  1549. [1920] [LK_DDP/DUMP]pwm clock=0
  1550.  
  1551. [1920] [LK_DDP/DUMP]==DISP MMSYS_CONFIG ANALYSIS==
  1552.  
  1553. [1920] [LK_DDP/DUMP]mmsys clock=0x0, CG_CON0=0xfffcb3fc, CG_CON1=0xfffffff0
  1554.  
  1555. [1920] [LK_DDP/DUMP]clock on modules:smi_common, smi_larb0, ovl0, ovl1, wdma0, ccorr, aal, disp_pwm_mm, disp_pwm_26m, dsi_engine, dsi_digital,
  1556.  
  1557. [1940] [LK_DDP/DUMP]valid0=0x40093fb, valid1=0x3e0, ready0=0x0, ready1=0x400000, greq=00
  1558.  
  1559. [1940] [LK_DDP/DUMP]ovl0_mm_ovl0_mout :Valid,-
  1560.  
  1561. [1940] [LK_DDP/DUMP]ovl0_mout0_mm_color_sin1 :Valid,-
  1562.  
  1563. [1940] [LK_DDP/DUMP]ovl0_mout1_mm_wdma0_sin0 :--
  1564.  
  1565. [1940] [LK_DDP/DUMP]color_sel_mm_color :Valid,-
  1566.  
  1567. [1940] [LK_DDP/DUMP]color_mm_ccorr :Valid,-
  1568.  
  1569. [1940] [LK_DDP/DUMP]ccorr_mm_aal :Valid,-
  1570.  
  1571. [1940] [LK_DDP/DUMP]aal_mm_gamma :Valid,-
  1572.  
  1573. [1940] [LK_DDP/DUMP]gamma_mm_dither :Valid,-
  1574.  
  1575. [1940] [LK_DDP/DUMP]dither_mm_dither_mout :Valid,-
  1576.  
  1577. [1940] [LK_DDP/DUMP]dither_mout0_mm_rdma0 :Valid,-
  1578.  
  1579. [1940] [LK_DDP/DUMP]dither_mout1_mm_ufoe_sin1 :--
  1580.  
  1581. [1940] [LK_DDP/DUMP]dither_mout2_mm_wdma0_sin1:--
  1582.  
  1583. [1940] [LK_DDP/DUMP]rdma0_mm_rdma0_sout :Valid,-
  1584.  
  1585. [1940] [LK_DDP/DUMP]rdma0_sout0_mm_ufoe_sin0 :--
  1586.  
  1587. [1960] [LK_DDP/DUMP]rdma0_sout1_mm_color_sin0 :--
  1588.  
  1589. [1960] [LK_DDP/DUMP]rdma0_sout2_mm_dsi0_sin1 :Valid,-
  1590.  
  1591. [1960] [LK_DDP/DUMP]rdma0_sout3_mm_dpi0_sin1 :--
  1592.  
  1593. [1960] [LK_DDP/DUMP]ufoe_sel_mm_ufoe :--
  1594.  
  1595. [1960] [LK_DDP/DUMP]ufoe_mm_ufoe_mout :--
  1596.  
  1597. [1960] [LK_DDP/DUMP]ufoe_mout0_mm_dsi0_sin0 :--
  1598.  
  1599. [1960] [LK_DDP/DUMP]ufoe_mout1_mm_dpi0_sin0 :--
  1600.  
  1601. [1960] [LK_DDP/DUMP]ufoe_mout2_mm_wdma0_sin2 :--
  1602.  
  1603. [1960] [LK_DDP/DUMP]wdma0_sel_mm_wdma0 :--
  1604.  
  1605. [1960] [LK_DDP/DUMP]ovl1_mm_ovl1_mout :--
  1606.  
  1607. [1960] [LK_DDP/DUMP]ovl1_mout0_m0x0
  1608.  
  1609. [2000] [LK_DDP/OVL](0x0c0)O0_R_CTRL =0x740001
  1610.  
  1611. [2000] [LK_DDP/OVL](0x0c8)O0_R_M_GMC_SET1 =0x6070
  1612.  
  1613. [2000] [LK_DDP/OVL](0x0cc)O0_R_M_SLOW_CON =0x0
  1614.  
  1615. [2000] [LK_DDP/OVL](0x0d0)O0_R_FIFO_CTRL =0x800000
  1616.  
  1617. [2000] [LK_DDP/OVL](0x24c)O0_R_DBG =0x20000001
  1618.  
  1619. [2000] [LK_DDP/OVL](0x090)O3_CON =0x10021ff
  1620.  
  1621. [2000] [LK_DDP/OVL](0x094)O3_SRCKEY =0x0
  1622.  
  1623. [2000] [LK_DDP/OVL](0x098)O3_SRC_SIZE =0x50002d0
  1624.  
  1625. [2000] [LK_DDP/OVL](0x09c)O3_OFFSET =0x0
  1626.  
  1627. [2000] [LK_DDP/OVL](0xfa0)O3_ADDR =0xbf6c8000
  1628.  
  1629. [2000] [LK_DDP/OVL](0x0a4)O3_PITCH =0xff0b40
  1630.  
  1631. [2000] [LK_DDP/OVL](0x0a8)O3_TILE =0x0
  1632.  
  1633. [2000] [LK_DDP/OVL](0x120)O3_R_CTRL =0x720001
  1634.  
  1635. [2000] [LK_DDP/OVL](0x128)O3_R_M_GMC_SET1 =0x6070
  1636.  
  1637. [2000] [LK_DDP/OVL](0x12c)O3_R_M_SLOW_CON =0x0
  1638.  
  1639. [2000] [LK_DDP/OVL](0x130)O3_R_FIFO_CTRL =0x800000
  1640.  
  1641. [2000] [LK_DDP/OVL](0x258)O3_R_DBG =0xe0000001
  1642.  
  1643. [2000] [LK_DDP/OVL](0x1d4)O_DBG_MON_SEL =0x0
  1644.  
  1645. [2020] [LK_DDP/OVL](0x200)O_DUMMY_REG =0x0
  1646.  
  1647. [2020] [LK_DDP/OVL](0x240)O_FLOW_CTRL =0x8063020
  1648.  
  1649. [2020] [LK_DDP/OVL](0x244)O_ADDCON =0x82d4406f
  1650.  
  1651. [2020] [LK_DDP/DUMP]==DISP COLOR0 REGS==
  1652.  
  1653. [2020] [LK_DDP/DUMP](0x400)COLOR_CFG_MAIN =0x209c
  1654.  
  1655. [2020] [LK_DDP/DUMP](0x404)COLOR_PXL_CNT_MAIN =0x0
  1656.  
  1657. [2020] [LK_DDP/DUMP](0x408)COLOR_LINE_CNT_MAIN =0x0
  1658.  
  1659. [2020] [LK_DDP/DUMP](0xc00)COLOR_START =0x3
  1660.  
  1661. [2020] [LK_DDP/DUMP](0xc50)COLOR_INTER_IP_W =0x2d0
  1662.  
  1663. [2020] [LK_DDP/DUMP](0xc54)COLOR_INTER_IP_H =0x500
  1664.  
  1665. [2020] [LK_DDP/DUMP]==DISP CCORR REGS==
  1666.  
  1667. [2020] [LK_DDP/DUMP](00)EN =0x1
  1668.  
  1669. [2020] [LK_DDP/DUMP](20)CFG =0x1
  1670.  
  1671. [2020] [LK_DDP/DUMP](24)IN_CNT =0x482018f
  1672.  
  1673. [2020] [LK_DDP/DUMP](28)OUT_CNT =0x4a502b1
  1674.  
  1675. [2020] [LK_DDP/DUMP](30)SIZE =0x2d00500
  1676.  
  1677. [2020] [LK_DDP/DUMP]==DISP AAL REGS==
  1678.  
  1679. [2020] [LK_DDP/DUMP](0x000)AAL_EN =0x0
  1680.  
  1681. [2020] [LK_DDP/DUMP](0x008)AAL_INTEN =0x0
  1682.  
  1683. [2030] [LK_DDP/DUMP](0x00c)AAL_INTSTA =0x0
  1684.  
  1685. [2040] [LK_DDP/DUMP](0x020)AAL_CFG =0x1
  1686.  
  1687. [2040] [LK_DDP/DUMP](0x024)AAL_IN_CNT =0x10001
  1688.  
  1689. [2040] [LK_DDP/DUMP](0x028)AAL_OUT_CNT =0x10001
  1690.  
  1691. [2040] [LK_DDP/DUMP](0x030)AAL_SIZE =0x2d00500
  1692.  
  1693. [2040] [LK_DDP/DUMP](0x20c)AAL_CABC_00 =0x0
  1694.  
  1695. [2040] [LK_DDP/DUMP](0x214)AAL_CABC_02 =0x100
  1696.  
  1697. [2040] [LK_DDP/DUMP](0x20c)AAL_STATUS_00 =0x0
  1698.  
  1699. [2040] [LK_DDP/DUMP](0x210)AAL_STATUS_01 =0x0
  1700.  
  1701. [2040] [LK_DDP/DUMP](0x2a0)AAL_STATUS_31 =0x0
  1702.  
  1703. [2040] [LK_DDP/DUMP](0x2a4)AAL_STATUS_32 =0x3fffff
  1704.  
  1705. [2040] [LK_DDP/DUMP](0x3b0)AAL_DRE_MAPPING_00 =0x18
  1706.  
  1707. [2040] [LK_DDP/DUMP]==DISP GAMMA REGS==
  1708.  
  1709. [2040] [LK_DDP/DUMP](0x000)GA_EN =0x0
  1710.  
  1711. [2040] [LK_DDP/DUMP](0x004)GA_RESET =0x0
  1712.  
  1713. [2040] [LK_DDP/DUMP](0x008)GA_INTEN =0x0
  1714.  
  1715. [2040] [LK_DDP/DUMP](0x00c)GA_INTSTA =0x0
  1716.  
  1717. [2040] [LK_DDP/DUMP](0x010)GA_STATUS =0xf0
  1718.  
  1719. [2040] [LK_DDP/DUMP](0x020)GA_CFG =0x0
  1720.  
  1721. [2060] [LK_DDP/DUMP](0x024)GA_IN_COUNT =0x10001
  1722.  
  1723. [2060] [LK_DDP/DUMP](0x028)GA_OUT_COUNT =0x10001
  1724.  
  1725. [2060] [LK_DDP/DUMP](0x02c)GA_CHKSUM =0x0
  1726.  
  1727. [2060] [LK_DDP/DUMP](0x030)GA_SIZE =0x2d00500
  1728.  
  1729. [2060] [LK_DDP/DUMP](0x0c0)GA_DUMMY_REG =0x0
  1730.  
  1731. [2060] [LK_DDP/DUMP](0x800)GA_LUT =0x35c0287a
  1732.  
  1733. [2060] [LK_DDP/DUMP]==DISP DITHER REGS==
  1734.  
  1735. [2060] [LK_DDP/DUMP](00)EN =0x1
  1736.  
  1737. [2060] [LK_DDP/DUMP](20)CFG =0x2
  1738.  
  1739. [2060] [LK_DDP/DUMP](24)IN_CNT =0x4890291
  1740.  
  1741. [2060] [LK_DDP/DUMP](28)OUT_CNT =0x4ad001b
  1742.  
  1743. [2060] [LK_DDP/DUMP](30)SIZE =0x2d00500
  1744.  
  1745. [2060] [LK_DDP/RDMA]== DISP RDMA0 ==
  1746.  
  1747. [2060] [LK_DDP/RDMA](0x000)R_INTEN =0x3f
  1748.  
  1749. [2060] [LK_DDP/RDMA](0x004)R_INTS =0x26
  1750.  
  1751. [2060] [LK_DDP/RDMA](0x010)R_CON =0x101
  1752.  
  1753. [2060] [LK_DDP/RDMA](0x014)R_SIZE0 =0x2d0
  1754.  
  1755. [2060] [LK_DDP/RDMA](0x018)R_SIZE1 =0x500
  1756.  
  1757. [2060] [LK_DDP/RDMA](0x01c)R_TAR_LINE =0xf0
  1758.  
  1759. [2060] [LK_DDP/RDMA](0x024)R_M_CON =0x0
  1760.  
  1761. [2080] [LK_DDP/RDMA](0xf00)R_M_S_ADDR =0x0
  1762.  
  1763. [2080] [LK_DDP/RDMA](0x02c)R_M_SRC_PITCH =0x0
  1764.  
  1765. [2080] [LK_DDP/RDMA](0x030)R_M_GMC_SET0 =0x1a01356b
  1766.  
  1767. [2080] [LK_DDP/RDMA](0x034)R_M_SLOW_CON =0x0
  1768.  
  1769. [2080] [LK_DDP/RDMA](0x038)R_M_GMC_SET1 =0x10
  1770.  
  1771. [208
  1772. [2120] [LK_DDP/DUMP]DSI0+00e0 : 0x00000000 0x00000000 0x00000000 0x00000000
  1773.  
  1774. [2120] [LK_DDP/DUMP]DSI0+00f0 : 0x00000000 0x00000000 0x00000000 0x00000000
  1775.  
  1776. [2120] [LK_DDP/DUMP]DSI0+0100 : 0x00000055 0x00000001 0x00000000 0x000000b8
  1777.  
  1778. [2120] [LK_DDP/DUMP]DSI0+0110 : 0x14080404 0x08140610 0x06150100 0x00081a03
  1779.  
  1780. [2120] [LK_DDP/DUMP]DSI0+0120 : 0x00000000 0x00000000 0x00000000 0x00000000
  1781.  
  1782. [2120] [LK_DDP/DUMP]DSI0+0130 : 0x00000021 0x00000000 0x00000000 0x00000000
  1783.  
  1784. [2120] [LK_DDP/DUMP]== DISP Config ==
  1785.  
  1786. [2120] [LK_DDP/DUMP](0x0 )MMSYS_INTEN =0x0
  1787.  
  1788. [2120] [LK_DDP/DUMP](0x4 )MMSYS_INTSTA =0x0
  1789.  
  1790. [2140] [LK_DDP/DUMP](0xc )PWM_APB_ERR_ADDR =0x0
  1791.  
  1792. [2140] [LK_DDP/DUMP](0x30)OVL0_MOUT_EN =0x1
  1793.  
  1794. [2140] [LK_DDP/DUMP](0x38)DITHER_MOUT_EN =0x1
  1795.  
  1796. [2140] [LK_DDP/DUMP](0x3C)UFOE_MOUT_EN =0x0
  1797.  
  1798. [2140] [LK_DDP/DUMP](0x40)MMSYS_MOUT_RST =0x0
  1799.  
  1800. [2140] [LK_DDP/DUMP](0x58)COLOR0_SIN =0x1
  1801.  
  1802. [2140] [LK_DDP/DUMP](0x5C)WDMA0_SIN =0x0
  1803.  
  1804. [2140] [LK_DDP/DUMP](0x60)UFOE_SIN =0x0
  1805.  
  1806. [2140] [LK_DDP/DUMP](0x64)DSI0_SIN =0x1
  1807.  
  1808. [2140] [LK_DDP/DUMP](0x68)DPI0_SIN =0x0
  1809.  
  1810. [2140] [LK_DDP/DUMP](0x6C)RDMA0_SOUT_SIN =0x2
  1811.  
  1812. [2140] [LK_DDP/DUMP](0x70)RDMA1_SOUT_SIN =0x0
  1813.  
  1814. [2140] [LK_DDP/DUMP](0x0F0)MM_MISC =0x0
  1815.  
  1816. [2140] [LK_DDP/DUMP](0x100)MM_CG_CON0 =0xfffcb3fc
  1817.  
  1818. [2140] [LK_DDP/DUMP](0x110)MM_CG_CON1 =0xfffffff0
  1819.  
  1820. [2140] [LK_DDP/DUMP](0x120)MM_HW_DCM_DIS0 =0x0
  1821.  
  1822. [2140] [LK_DDP/DUMP](0x140)MM_SW0_RST_B =0xffffffff
  1823.  
  1824. [2140] [LK_DDP/DUMP](0x144)MM_SW1_RST_B =0xffffffff
  1825.  
  1826. [2160] [LK_DDP/DUMP](0x150)MM_LCM_RST_B =0x1
  1827.  
  1828. [2160] [LK_DDP/DUMP](0x880)MM_DBG_OUT_SEL =0x0
  1829.  
  1830. [2160] [LK_DDP/DUMP](0x890)MM_DUMMY =0xfffcb3fc
  1831.  
  1832. [2160] [LK_DDP/DUMP](0x8a0)DISP_VALID_0 =0x40093fb
  1833.  
  1834. [2160] [LK_DDP/DUMP](0x8a8)DISP_READY_0 =0x400901b
  1835.  
  1836. [2160] [LK_DDP/DUMP]==DISP MUTEX REGS==
  1837.  
  1838. [2160] [LK_DDP/DUMP](0x000)M_INTEN =0x0
  1839.  
  1840. [2160] [LK_DDP/DUMP](0x004)M_INTSTA =0x401
  1841.  
  1842. [2160] [LK_DDP/DUMP](0x020)M0_EN =0x1
  1843.  
  1844. [2160] [LK_DDP/DUMP](0x028)M0_RST =0x0
  1845.  
  1846. [2160] [LK_DDP/DUMP](0x02c)M0_MOD =0x2f940
  1847.  
  1848. [2160] [LK_DDP/DUMP](0x030)M0_SOF =0x1
  1849.  
  1850. [2160] [LK_DDP/DUMP](0x040)M1_EN =0x0
  1851.  
  1852. [2160] [LK_DDP/DUMP](0x048)M1_RST =0x0
  1853.  
  1854. [2160] [LK_DDP/DUMP](0x04c)M1_MOD =0x0
  1855.  
  1856. [2160] [LK_DDP/DUMP](0x050)M1_SOF =0x0
  1857.  
  1858. [2160] [LK_DDP/DUMP](0x060)M2_EN =0x0
  1859.  
  1860. [2160] [LK_DDP/DUMP](0x068)M2_RST =0x0
  1861.  
  1862. [2160] [LK_DDP/DUMP](0x06c)M2_MOD =0x0
  1863.  
  1864. [2160] [LK_DDP/DUMP](0x070)M2_SOF =0x0
  1865.  
  1866. [2170] [LK_DDP/DUMP](0x080)M3_EN =0x0
  1867.  
  1868. [2180] [LK_DDP/DUMP](0x088)M3_RST =0x0
  1869.  
  1870. [2180] [LK_DDP/DUMP](0x08c)M3_MOD =0x0
  1871.  
  1872. [2180] [LK_DDP/DUMP](0x090)M3_SOF =0x0
  1873.  
  1874. [2180] [LK_DDP/DUMP](0x0a0)M4_EN =0x0
  1875.  
  1876. [2180] [LK_DDP/DUMP](0x0a8)M4_RST =0x0
  1877.  
  1878. [2180] [LK_DDP/DUMP](0x0ac)M4_MOD =0x0
  1879.  
  1880. [2180] [LK_DDP/DUMP](0x0b0)M4_SOF =0x0
  1881.  
  1882. [2180] [LK_DDP/DUMP](0x0c0)M5_EN =0x0
  1883.  
  1884. [2180] [LK_DDP/DUMP](0x0c8)M5_RST =0x0
  1885.  
  1886. [2180] [LK_DDP/DUMP](0x0cc)M5_MOD =0x0
  1887.  
  1888. [2180] [LK_DDP/DUMP](0x0d0)M5_SOF =0x0
  1889.  
  1890. [2180] [LK_DDP/DUMP](0x200)DEBUG_OUT_SEL =0x0
  1891.  
  1892. [2180] [DISP]func|disp_lcm_is_video_mode
  1893.  
  1894. [2180] [PROFILE] ------- disp init takes 992 ms --------
  1895.  
  1896. [2180] s_mt65xx_gd.gdfIndex=3[2180] mt_get_logo_db_addr_pa: 0xbef30000
  1897.  
  1898. [2180] [PART_LK][get_part] logo
  1899.  
  1900. [2180] [PART_LK][get_part] logo
  1901.  
  1902.  
  1903.  
  1904. =========================================
  1905.  
  1906. [2180] [LK_BOOT] logo magic number : 0x58881688
  1907.  
  1908. [2180] [LK_BOOT] logo name : LOGO
  1909.  
  1910. [2200] [LK_BOOT] logo size : 1293703
  1911.  
  1912. =========================================
  1913.  
  1914. read the data of logo
  1915.  
  1916. [2220] [PROFILE] ------- load_logo takes 21 ms --------
  1917.  
  1918. kedump mini start
  1919.  
  1920. kedump: boot_reason(4)
  1921.  
  1922. RAM_CONSOLE. sram(0x12c000) sig 0 mismatch
  1923.  
  1924. RAM_CONSOLE. start: 0x43f00000, size: 0x10000
  1925.  
  1926. RAM_CONSOLE. lk last status: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x detecting pmic just reset
  1927.  
  1928. [mboot_recovery_load_misc]: size is 6144
  1929.  
  1930. [mboot_recovery_load_misc]: misc_addr is 0x41e75588
  1931.  
  1932. [2240] [PART_LK][get_part] para
  1933.  
  1934. [2240] [LK_BOOT] Load '<null>' partition to 0x41E75588 (6144 bytes in 1 ms)
  1935.  
  1936. [2240] mtk detect key function key = 9
  1937.  
  1938. [2240] mtk detect key function key = 1
  1939.  
  1940. [2240] mtk detect key function key = 2
  1941.  
  1942. [2240] mtk detect key function key = 9
  1943.  
  1944. [2240] mtk detect key function key = 1
  1945.  
  1946. [2240] mtk detect key function key = 2
  1947.  
  1948. [2240] mtk detect key function key = 9
  1949.  
  1950. [2240] mtk detect key function key = 1
  1951.  
  1952. [2240] mtk detect key function key = 2
  1953.  
  1954. [2250] mtk detect key function key = 9
  1955.  
  1956. [2260] mtk detect key function key = 1
  1957.  
  1958. [2260] mtk detect key function key = 2
  1959.  
  1960. [2260] mtk detect key function key = 9
  1961.  
  1962. [2260] mtk detect key function key = 1
  1963.  
  1964. [2260] mtk detect key function key = 2
  1965.  
  1966. [2260] mtk detect key function key = 9
  1967.  
  1968. [2260] mtk detect key function key = 1
  1969.  
  1970. [2260] mtk detect key function key = 2
  1971.  
  1972. [2260] mtk detect key function key = 9
  1973.  
  1974. [2260] mtk detect key function key = 1
  1975.  
  1976. [2260] mtk detect key function key = 2
  1977.  
  1978. [2260] mtk detect key function key = 9
  1979.  
  1980. [2260] mtk detect key function key = 1
  1981.  
  1982. [2260] mtk detect key function key = 2
  1983.  
  1984. [2260] mtk detect key function key = 9
  1985.  
  1986. [2260] mtk detect key function key = 1
  1987.  
  1988. [2260] mtk detect key function key = 2
  1989.  
  1990. [2260] mtk detect key function key = 9
  1991.  
  1992. [2260] mtk detect key function key = 1
  1993.  
  1994. [2260] mtk detect key function key = 2
  1995.  
  1996. [2260] mtk detect key function key = 9
  1997.  
  1998. [2260] mtk detect key function key = 1
  1999.  
  2000. [2270] mtk detect key function key = 2
  2001.  
  2002. [2280] mtk detect key function key = 9
  2003.  
  2004. [2280] mtk detect key function key = 1
  2005.  
  2006. [2280] mtk detect key function key = 2
  2007.  
  2008. [2280] mtk detect key function key = 9
  2009.  
  2010. [2280] mtk detect key function key = 1
  2011.  
  2012. [2280] mtk detect key function key = 2
  2013.  
  2014. [2280] mtk detect key function key = 9
  2015.  
  2016. [2280] mtk detect key function key = 1
  2017.  
  2018. [2280] mtk detect key function key = 2
  2019.  
  2020. [2280] mtk detect key function key = 9
  2021.  
  2022. [2280] mtk detect key function key = 1
  2023.  
  2024. [2280] mtk detect key function key = 2
  2025.  
  2026. [2280] mtk detect key function key = 9
  2027.  
  2028. [2280] mtk detect key function key = 1
  2029.  
  2030. [2280] mtk detect key function key = 2
  2031.  
  2032. [2280] mtk detect key function key = 9
  2033.  
  2034. [2280] mtk detect key function key = 1
  2035.  
  2036. [2280] mtk detect key function key = 2
  2037.  
  2038. [2280] mtk detect key function key = 9
  2039.  
  2040. [2280] mtk detect key function key = 1
  2041.  
  2042. [2280] mtk detect key function key = 2
  2043.  
  2044. [2280] mtk detect key function key = 9
  2045.  
  2046. [2290] mtk detect key function key = 1
  2047.  
  2048. [2300] mtk detect key function key = 2
  2049.  
  2050. [2300] mtk detect key function key = 9
  2051.  
  2052. [2300] mtk detect key function key = 1
  2053.  
  2054. [2300] mtk detect key function key = 2
  2055.  
  2056. [2300] mtk detect key function key = 9
  2057.  
  2058. [2300] mtk detect key function key = 1
  2059.  
  2060. [2300] mtk detect key function key = 2
  2061.  
  2062. [2300] mtk detect key function key = 9
  2063.  
  2064. [2300] mtk detect key function key = 1
  2065.  
  2066. [2300] mtk detect key function key = 2
  2067.  
  2068. [2300] mtk detect key function key = 9
  2069.  
  2070. [2300] mtk detect key function key = 1
  2071.  
  2072. [2300] mtk detect key function key = 2
  2073.  
  2074. [2300] mtk detect key function key = 9
  2075.  
  2076. [2300] mtk detect key function key = 1
  2077.  
  2078. [2300] mtk detect key function key = 2
  2079.  
  2080. [2300] mtk detect key function key = 9
  2081.  
  2082. [2300] mtk detect key function key = 1
  2083.  
  2084. [2300] mtk detect key function key = 2
  2085.  
  2086. [2300] mtk detect key function key = 9
  2087.  
  2088. [2300] mtk detect key function key = 1
  2089.  
  2090. [2300] mtk detect key function key = 2
  2091.  
  2092. [2310] mtk detect key function key = 9
  2093.  
  2094. [2320] mtk detect key function key = 1
  2095.  
  2096. [2320] mtk detect key function key = 2
  2097.  
  2098. [2320] mtk detect key function key = 9
  2099.  
  2100. [2320] mtk detect key function key = 1
  2101.  
  2102. [2320] mtk detect key function key = 2
  2103.  
  2104. [2320] mtk detect key function key = 9
  2105.  
  2106. [2320] mtk detect key function key = 1
  2107.  
  2108. [2320] mtk detect key function key = 2
  2109.  
  2110. [2320] mtk detect key function key = 9
  2111.  
  2112. [2320] mtk detect key function key = 1
  2113.  
  2114. [2320] mtk detect key function key = 2
  2115.  
  2116. [2320] mtk detect key function key = 9
  2117.  
  2118. [2360] [AUXADC] ch=0 raw=23422 data=3859
  2119.  
  2120. [2360] [mt65xx_bat_init] check VBAT=3859 mV with 3000 mV
  2121.  
  2122. [2360] [Chip_Trim] Reg[0xCB8]=0x0, chip_diff_trim_value_4_0=0
  2123.  
  2124. [2360] [Chip_Trim] chip_diff_trim_value=1000
  2125.  
  2126. [2360] ******** [fgauge_initialization] reset HW FG!
  2127.  
  2128. [2360] [fgauge_initialization] Reg[0xcba]=0x8
  2129.  
  2130. [2360] [fg_get_data_ready_status] Reg[0xca4]=0x229
  2131.  
  2132.  
  2133. [2360] [fg_get_data_ready_status] Reg[0xca4]=0x629
  2134.  
  2135.  
  2136. [2360] [fgauge_read_current] : FG_CURRENT = 0
  2137.  
  2138.  
  2139. [2360] [fg_get_data_ready_status] Reg[0xca4]=0xc29
  2140.  
  2141.  
  2142. [2360] [fg_get_data_ready_status] Reg[0xca4]=0x829
  2143.  
  2144.  
  2145. [2360] [fgauge_read_current] current(discharging) = 0 mA
  2146.  
  2147.  
  2148. [2360] [fgauge_read_current] Auto adjust value due to the Rfg is 10
  2149.  
  2150. Ori current=0, [2380] [fgauge_read_current] new current=0
  2151.  
  2152. [2380] [fgauge_read_current] ori current=0
  2153.  
  2154. [2380] [use_chip_trim_value] 0 -> 0
  2155.  
  2156. [2380] [fgauge_read_current] final current=0 (ratio=104)
  2157.  
  2158. [2380] [fg_get_data_ready_status] Reg[0xca4]=0x229
  2159.  
  2160.  
  2161. [2380] [fg_get_data_ready_status] Reg[0xca4]=0x629
  2162.  
  2163.  
  2164. [2380] [fgauge_read_current] : FG_CURRENT = 0
  2165.  
  2166.  
  2167. [2380] [fg_get_data_ready_status] Reg[0xca4]=0xc29
  2168.  
  2169.  
  2170. [2380] [fg_get_data_ready_status] Reg[0xca4]=0x829
  2171.  
  2172.  
  2173. [2380] [fgauge_read_current] current(discharging) = 0 mA
  2174.  
  2175.  
  2176. [2380] [fgauge_read_current] Auto adjust value due to the Rfg is 10
  2177.  
  2178. Ori current=0, [2380] [fgauge_read_current] new current=0
  2179.  
  2180. [2380] [fgauge_read_current] ori current=0
  2181.  
  2182. [2380] [use_chip_trim_value] 0 -> 0
  2183.  
  2184. [2380] [fgauge_read_current] final current=0 (ratio=104)
  2185.  
  2186. [2380] [fg_get_data_ready_status] Reg[0xca4]=0x229
  2187.  
  2188.  
  2189. [2380] [fg_get_data_ready_status] Reg[0xca4]=0x629
  2190.  
  2191.  
  2192. [2400] [fgauge_read_current] : FG_CURRENT = 0
  2193.  
  2194.  
  2195. [2400] [fg_get_data_ready_status] Reg[0xca4]=0xc29
  2196.  
  2197.  
  2198. [2400] [fg_get_data_ready_status] Reg[0xca4]=0x829
  2199.  
  2200.  
  2201. [2400] [fgauge_read_current] current(discharging) = 0 mA
  2202.  
  2203.  
  2204. [2400] [fgauge_read_current] Auto adjust value due to the Rfg is 10
  2205.  
  2206. Ori current=0, [2400] [fgauge_read_current] new current=0
  2207.  
  2208. [2400] [fgauge_read_current] ori current=0
  2209.  
  2210. [2400] [use_chip_trim_value] 0 -> 0
  2211.  
  2212. [2400] [fgauge_read_current] final current=0 (ratio=104)
  2213.  
  2214. [2400] [fg_get_data_ready_status] Reg[0xca4]=0x229
  2215.  
  2216.  
  2217. [2400] [fg_get_data_ready_status] Reg[0xca4]=0x629
  2218.  
  2219.  
  2220. [2400] [fgauge_read_current] : FG_CURRENT = 0
  2221.  
  2222.  
  2223. [2400] [fg_get_data_ready_status] Reg[0xca4]=0xc29
  2224.  
  2225.  
  2226. [2400] [fg_get_data_ready_status] Reg[0xca4]=0x829
  2227.  
  2228.  
  2229. [2400] [fgauge_read_current] current(discharging) = 0 mA
  2230.  
  2231.  
  2232. [2400] [fgauge_read_current] Auto adjust value due to the Rfg is 10
  2233.  
  2234. Ori current=0, [2400] [fgauge_read_current] new current=0
  2235.  
  2236. [2420] [fgauge_read_current] ori current=0
  2237.  
  2238. [2420] [use_chip_trim_value] 0 -> 0
  2239.  
  2240. [2420] [fgauge_read_current] final current=0 (ratio=104)
  2241.  
  2242. [2420] [fg_get_data_ready_status] Reg[0xca4]=0x229
  2243.  
  2244.  
  2245. [2420] [fg_get_data_ready_status] Reg[0xca4]=0x629
  2246.  
  2247.  
  2248. [2420] [fgauge_read_current] : FG_CURRENT = fdbb
  2249.  
  2250.  
  2251. [2420] [fg_get_data_ready_status] Reg[0xca4]=0xc29
  2252.  
  2253.  
  2254. [2420] [fg_get_data_ready_status] Reg[0xca4]=0x829
  2255.  
  2256.  
  2257. [2420] [fgauge_read_current] current(discharging) = 917 mA
  2258.  
  2259.  
  2260. [2420] [fgauge_read_current] Auto adjust value due to the Rfg is 10
  2261.  
  2262. Ori current=917, [2420] [fgauge_read_current] new current=1834
  2263.  
  2264. [2420] [fgauge_read_current] ori current=1834
  2265.  
  2266. [2420] [use_chip_trim_value] 1907 -> 1907
  2267.  
  2268. [2420] [fgauge_read_current] final current=1907 (ratio=104)
  2269.  
  2270. [2420] ******** [fgauge_initialization] Done!
  2271.  
  2272. [bq24158_hw_init] (0x06,0x77)
  2273.  
  2274. [0x0]=0x40
  2275.  
  2276. [0x1]=0x78
  2277.  
  2278. [0x2]=0xb4
  2279.  
  2280. [0x3]=0x91
  2281.  
  2282. [0x4]=0x9a
  2283.  
  2284. [0x5]=0x4
  2285.  
  2286. [0x6]=0x7a
  2287.  
  2288. [2580] [fgauge_read_IM_current] : FG_CURRENT = fdc0
  2289.  
  2290.  
  2291. [2580] [fgauge_read_IM_current] current(discharging) = 909 mA
  2292.  
  2293.  
  2294. [2580] [fgauge_read_IM_current] Auto adjust value due to the Rfg is 10
  2295.  
  2296. Ori current=909, [2580] [fgauge_read_IM_current] new current=1818
  2297.  
  2298. [2580] [fgauge_read_IM_current] ori current=1818
  2299.  
  2300. [2580] [use_chip_trim_value] 1890 -> 1890
  2301.  
  2302. [2580] [fgauge_read_IM_current] final current=1890 (ratio=104)
  2303.  
  2304. [2580] [1,Trigger ADC PTIM mode] volt1=38634, curr_1=1890
  2305.  
  2306. [2580] [2,enable dummy load][2720] [fgauge_read_IM_current] : FG_CURRENT = fca1
  2307.  
  2308.  
  2309. [2720] [fgauge_read_IM_current] current(discharging) = 1363 mA
  2310.  
  2311.  
  2312. [2720] [fgauge_read_IM_current] Auto adjust value due to the Rfg is 10
  2313.  
  2314. Ori current=1363, [2720] [fgauge_read_IM_current] new current=2726
  2315.  
  2316. [2720] [fgauge_read_IM_current] ori current=2726
  2317.  
  2318. [2740] [use_chip_trim_value] 2835 -> 2835
  2319.  
  2320. [2740] [fgauge_read_IM_current] final current=2835 (ratio=104)
  2321.  
  2322. [2740] [3,Trigger ADC PTIM mode again] volt2=38504, curr_2=2835
  2323.  
  2324. [2740] [5,Calculate Rac] volt_1=38634,volt_2=38504,curr_1=1890,curr_2=2835,rac_cal=137,ret=137,retry_count=0
  2325.  
  2326. [2740] [6,Calculate Rac] 38634,38504,1890,2835,137,137,0
  2327.  
  2328. [2780] [fgauge_read_IM_current] : FG_CURRENT = fde9
  2329.  
  2330.  
  2331. [2780] [fgauge_read_IM_current] current(discharging) = 844 mA
  2332.  
  2333.  
  2334. [2780] [fgauge_read_IM_current] Auto adjust value due to the Rfg is 10
  2335.  
  2336. Ori current=844, [2780] [fgauge_read_IM_current] new current=1688
  2337.  
  2338. [2780] [fgauge_read_IM_current] ori current=1688
  2339.  
  2340. [2780] [use_chip_trim_value] 1755 -> 1755
  2341.  
  2342. [2780] [fgauge_read_IM_current] final current=1755 (ratio=104)
  2343.  
  2344. [2780] [1,Trigger ADC PTIM mode] volt1=38573, curr_1=1755
  2345.  
  2346. [2780] [2,enable dummy load][2920] [fgauge_read_IM_current] : FG_CURRENT = fca1
  2347.  
  2348.  
  2349. [2920] [fgauge_read_IM_current] current(discharging) = 1363 mA
  2350.  
  2351.  
  2352. [2920] [fgauge_read_IM_current] Auto adjust value due to the Rfg is 10
  2353.  
  2354. Ori current=1363, [2920] [fgauge_read_IM_current] new current=2726
  2355.  
  2356. [2920] [fgauge_read_IM_current] ori current=2726
  2357.  
  2358. [2940] [use_chip_trim_value] 2835 -> 2835
  2359.  
  2360. [2940] [fgauge_read_IM_current] final current=2835 (ratio=104)
  2361.  
  2362. [2940] [3,Trigger ADC PTIM mode again] volt2=38492, curr_2=2835
  2363.  
  2364. [2940] [5,Calculate Rac] volt_1=38573,volt_2=38492,curr_1=1755,curr_2=2835,rac_cal=75,ret=75,retry_count=0
  2365.  
  2366. [2940] [6,Calculate Rac] 38573,38492,1755,2835,75,75,0
  2367.  
  2368. [2980] [fgauge_read_IM_current] : FG_CURRENT = fdc0
  2369.  
  2370.  
  2371. [2980] [fgauge_read_IM_current] current(discharging) = 909 mA
  2372.  
  2373.  
  2374. [2980] [fgauge_read_IM_current] Auto adjust value due to the Rfg is 10
  2375.  
  2376. Ori current=909, [2980] [fgauge_read_IM_current] new current=1818
  2377.  
  2378. [2980] [fgauge_read_IM_current] ori current=1818
  2379.  
  2380. [2980] [use_chip_trim_value] 1890 -> 1890
  2381.  
  2382. [2980] [fgauge_read_IM_current] final current=1890 (ratio=104)
  2383.  
  2384. [2980] [1,Trigger ADC PTIM mode] volt1=38586, curr_1=1890
  2385.  
  2386. [2980] [2,enable dummy load][3120] [fgauge_read_IM_current] : FG_CURRENT = fccb
  2387.  
  2388.  
  2389. [3120] [fgauge_read_IM_current] current(discharging) = 1296 mA
  2390.  
  2391.  
  2392. [3120] [fgauge_read_IM_current] Auto adjust value due to the Rfg is 10
  2393.  
  2394. Ori current=1296, [3120] [fgauge_read_IM_current] new current=2592
  2395.  
  2396. [3120] [fgauge_read_IM_current] ori current=2592
  2397.  
  2398. [3140] [use_chip_trim_value] 2695 -> 2695
  2399.  
  2400. [3140] [fgauge_read_IM_current] final current=2695 (ratio=104)
  2401.  
  2402. [3140] [3,Trigger ADC PTIM mode again] volt2=38466, curr_2=2695
  2403.  
  2404. [3140] [5,Calculate Rac] volt_1=38586,volt_2=38466,curr_1=1890,curr_2=2695,rac_cal=149,ret=149,retry_count=0
  2405.  
  2406. [3140] [6,Calculate Rac] 38586,38466,1890,2695,149,149,0
  2407.  
  2408. [3180] [fgauge_read_IM_current] : FG_CURRENT = fdc0
  2409.  
  2410.  
  2411. [3180] [fgauge_read_IM_current] current(discharging) = 909 mA
  2412.  
  2413.  
  2414. [3180] [fgauge_read_IM_current] Auto adjust value due to the Rfg is 10
  2415.  
  2416. Ori current=909, [3180] [fgauge_read_IM_current] new current=1818
  2417.  
  2418. [3180] [fgauge_read_IM_current] ori current=1818
  2419.  
  2420. [3180] [use_chip_trim_value] 1890 -> 1890
  2421.  
  2422. [3180] [fgauge_read_IM_current] final current=1890 (ratio=104)
  2423.  
  2424. [3180] [1,Trigger ADC PTIM mode] volt1=38552, curr_1=1890
  2425.  
  2426. [3180] [2,enable dummy load][3320] [fgauge_read_IM_current] : FG_CURRENT = fca3
  2427.  
  2428.  
  2429. [3320] [fgauge_read_IM_current] current(discharging) = 1359 mA
  2430.  
  2431.  
  2432. [3320] [fgauge_read_IM_current] Auto adjust value due to the Rfg is 10
  2433.  
  2434. Ori current=1359, [3320] [fgauge_read_IM_current] new current=2718
  2435.  
  2436. [3330] [fgauge_read_IM_current] ori current=2718
  2437.  
  2438. [3340] [use_chip_trim_value] 2826 -> 2826
  2439.  
  2440. [3340] [fgauge_read_IM_current] final current=2826 (ratio=104)
  2441.  
  2442. [3340] [3,Trigger ADC PTIM mode again] volt2=38456, curr_2=2826
  2443.  
  2444. [3340] [5,Calculate Rac] volt_1=38552,volt_2=38456,curr_1=1890,curr_2=2826,rac_cal=102,ret=102,retry_count=0
  2445.  
  2446. [3340] [6,Calculate Rac] 38552,38456,1890,2826,102,102,0
  2447.  
  2448. [3380] [fgauge_read_IM_current] : FG_CURRENT = fdc0
  2449.  
  2450.  
  2451. [3380] [fgauge_read_IM_current] current(discharging) = 909 mA
  2452.  
  2453.  
  2454. [3380] [fgauge_read_IM_current] Auto adjust value due to the Rfg is 10
  2455.  
  2456. Ori current=909, [3380] [fgauge_read_IM_current] new current=1818
  2457.  
  2458. [3380] [fgauge_read_IM_current] ori current=1818
  2459.  
  2460. [3380] [use_chip_trim_value] 1890 -> 1890
  2461.  
  2462. [3380] [fgauge_read_IM_current] final current=1890 (ratio=104)
  2463.  
  2464. [3380] [1,Trigger ADC PTIM mode] volt1=38545, curr_1=1890
  2465.  
  2466. [3380] [2,enable dummy load][3520] [fgauge_read_IM_current] : FG_CURRENT = fc9c
  2467.  
  2468.  
  2469. [3520] [fgauge_read_IM_current] current(discharging) = 1370 mA
  2470.  
  2471.  
  2472. [3520] [fgauge_read_IM_current] Auto adjust value due to the Rfg is 10
  2473.  
  2474. Ori current=1370, [3520] [fgauge_read_IM_current] new current=2740
  2475.  
  2476. [3540] [fgauge_read_IM_current] ori current=2740
  2477.  
  2478. [3540] [use_chip_trim_value] 2849 -> 2849
  2479.  
  2480. [3540] [fgauge_read_IM_current] final current=2849 (ratio=104)
  2481.  
  2482. [3540] [3,Trigger ADC PTIM mode again] volt2=38412, curr_2=2849
  2483.  
  2484. [3540] [5,Calculate Rac] volt_1=38545,volt_2=38412,curr_1=1890,curr_2=2849,rac_cal=138,ret=138,retry_count=0
  2485.  
  2486. [3540] [6,Calculate Rac] 38545,38412,1890,2849,138,138,0
  2487.  
  2488. [3540] [dlpt_R] 137,75,149,102,138 [75:149:5]125
  2489.  
  2490. [3540] [AUXADC] ch=0 raw=23388 data=3854
  2491.  
  2492. [3540] [check_bat_protect_status]: check VBAT=3854 mV with 3000 mV, start charging...
  2493.  
  2494. [3540] [check_bat_protect_status]: check VBAT=3854 mV with 3000 mV, stop charging...
  2495.  
  2496. [3540] [PROFILE] ------- battery init takes 610 ms --------
  2497.  
  2498. [3540] [PROFILE] ------- RTC boot check Init takes 0 ms --------
  2499.  
  2500. [3540] [lk logo: mt_disp_show_boot_logo 135]
  2501.  
  2502. [3560] [lk logo: init_fb_screen 59]
  2503.  
  2504. [3560] mt_get_logo_db_addr: 0xbef30000
  2505.  
  2506. [3560] [lk logo: init_fb_screen 77]MTK_LCM_PHYSICAL_ROTATION = 0
  2507.  
  2508. [3560] [lk logo: sync_anim_version 42]
  2509.  
  2510. [3560] [lk logo: init_fb_screen 100]pinfo[0]=0x00000027, pinfo[1]=0x0013bd87, pinfo[2]=164
  2511.  
  2512. [3560] [lk logo: init_fb_screen 102]define ANIMATION_NEW:show new animation with capacity num
  2513.  
  2514. [3560] [lk logo: init_fb_screen 103]CAPACITY_LEFT =278, CAPACITY_TOP =556
  2515.  
  2516. [3560] [lk logo: init_fb_screen 104]LCM_HEIGHT=441, LCM_WIDTH=817
  2517.  
  2518. [3560] mt_get_tempfb_addr: 0xbfa60000
  2519.  
  2520. [3560] [show_animation_common: check_logo_index_valid 71]logonum =39, index =0
  2521.  
  2522. [3560] show_animation_common, in_addr=0xbef300a4, logolen=30500
  2523.  
  2524. [3560] [decompress_logo decompress_logo 48]in=0xbef300a4, out=0xbfa60000, inlen=30500, logolen=3768320
  2525.  
  2526. [3620] [decompress_logo decompress_logo 97]have=3686400
  2527.  
  2528. [3620] [show_animation_common: fill_animation_logo 115]bits = 32
  2529.  
  2530. [3620] [show_logo_common]dst_addr= 0xffeae6e2, color_addr= 0xffe2e6ea, i= 0, j=0
  2531.  
  2532. [3620] [show_logo_common]dst_addr= 0xffeae6e2, color_addr= 0xffe2e6ea, i= 0, j=719
  2533.  
  2534. [3700] [show_logo_common]dst_addr= 0xfffcfbfb, color_addr= 0xfffbfbfc, i= 1279, j=0
  2535.  
  2536. [3700] [show_logo_common]dst_addr= 0xfffcfbfb, color_addr= 0xfffbfbfc, i= 1279, j=719
  2537.  
  2538. [3700] fb dump: 0xffeae6e2, 0xffeeebe8, 0xfff2efed, 0xfff0ecea
  2539.  
  2540. [3700] [DISP]func|primary_display_trigger
  2541.  
  2542. [3700] [LK_DDP/ddp_manager]path check busy on scenario primary_disp
  2543.  
  2544. [3700] [DISP]func|ddp_dsi_is_busy
  2545.  
  2546. [3700] [LK_DDP/ddp_manager]dsi0 is busy
  2547.  
  2548. [3700] [DISP]func|disp_lcm_is_video_mode
  2549.  
  2550. [3700] [DISP]func|disp_lcm_is_video_mode
  2551.  
  2552. [3700] [LEDS]LK: mt65xx_backlight_on:level = 255
  2553.  
  2554.  
  2555. [3720] [LEDS]LK: lcd-backlight level is 255
  2556.  
  2557.  
  2558. [3720] [LK_DDP/PWM][PWM] disp_pwm_set_backlight(id = 0x1, level_1024 = 1023)
  2559.  
  2560. [3720] [LK_DDP/PWM][PWM] set reg[0x1100e008] = 0x00000000
  2561.  
  2562. [3720] [LK_DDP/PWM][PWM] set reg[0x1100e014] = 0x03ff03ff
  2563.  
  2564. [3720] [LK_DDP/PWM][PWM] set reg[0x1100e000] = 0x00000001
  2565.  
  2566. [3720] [LK_DDP/PWM][PWM] disp_pwm_set_enabled: PWN_EN = 0x1
  2567.  
  2568. [3720] [LK_DDP/PWM][PWM] set reg[0x1100e008] = 0x00000001
  2569.  
  2570. [3720] [LK_DDP/PWM][PWM] set reg[0x1100e008] = 0x00000000
  2571.  
  2572. [3720] [LK_DDP/PWM][PWM] reg[0x1100e000] = 0x00000001
  2573.  
  2574. [3720] [LK_DDP/PWM][PWM] reg[0x1100e004] = 0x00000000
  2575.  
  2576. [3720] [LK_DDP/PWM][PWM] reg[0x1100e008] = 0x00000000
  2577.  
  2578. [3720] [LK_DDP/PWM][PWM] reg[0x1100e00c] = 0x00000000
  2579.  
  2580. [3720] [LK_DDP/PWM][PWM] reg[0x1100e010] = 0x00000000
  2581.  
  2582. [3720] [LK_DDP/PWM][PWM] reg[0x1100e014] = 0x00000000
  2583.  
  2584. [3720] [LK_DDP/PWM][PWM] reg[0x1100e018] = 0x00000000
  2585.  
  2586. [3720] [LK_DDP/PWM][PWM] reg[0x1100e01c] = 0x00000000
  2587.  
  2588. [3740] [LK_DDP/PWM][PWM] reg[0x1100e020] = 0x00000000
  2589.  
  2590. [3740] [LK_DDP/PWM][PWM] reg[0x1100e024] = 0x00000000
  2591.  
  2592. [3740] [LK_DDP/PWM][PWM] reg[0x1100e028] = 0x00000000
  2593.  
  2594. [3740] fb dump: 0xffeae6e2, 0xffeeebe8, 0xfff2efed, 0xfff0ecea
  2595.  
  2596. [3740] [DISP]func|primary_display_trigger
  2597.  
  2598. [3740] [LK_DDP/ddp_manager]path check busy on scenario primary_disp
  2599.  
  2600. [3740] [DISP]func|ddp_dsi_is_busy
  2601.  
  2602. [3740] [LK_DDP/ddp_manager]dsi0 is busy
  2603.  
  2604. [3740] [DISP]func|disp_lcm_is_video_mode
  2605.  
  2606. [3740] [DISP]func|disp_lcm_is_video_mode
  2607.  
  2608. [3740] [PROFILE] ------- backlight takes 17 ms --------
  2609.  
  2610. [3740] [PROFILE] ------- show logo takes 99 ms --------
  2611.  
  2612. [3740] [PROFILE] ------- sw_env takes 0 ms --------
  2613.  
  2614. [3740] [PROFILE] ------- platform_init takes 1898 ms --------
  2615.  
  2616. [3740] initializing target
  2617.  
  2618. [3740] calling apps_init()
  2619.  
  2620. [partition_get_index]find preloader index 0
  2621.  
  2622. [partition_get_index]find seccfg index 11
  2623.  
  2624. [partition_get_index]find secro index 13
  2625.  
  2626. [3760] [PART_LK][get_part] seccfg
  2627.  
  2628. [partition_get_index]find seccfg index 11
  2629.  
  2630. [SEC_CFG] sec_read_seccfg fail:3001
  2631.  
  2632. [SEC_INIT] sec_func_init -- fail to search seccfg
  2633.  
  2634. [SBC] NS-CHIP
  2635.  
  2636. [SEC_CFG] initializing seccfg
  2637.  
  2638. [SBC] NS-CHIP
  2639.  
  2640. [SBC] NS-CHIP
  2641.  
  2642. [3780] [PART_LK][get_part] secro
  2643.  
  2644. [partition_get_index]find secro index 13
  2645.  
  2646. [3780] [PART_LK][get_part] secro
  2647.  
  2648. [partition_get_index]find secro index 13
  2649.  
  2650. [SEC_SRO] Search SRO - SRO Ready
  2651.  
  2652. [SEC_INIT] Search SECRO - SW sec boot configured (0, 0)
  2653.  
  2654. [SEC_INIT] Search SECRO - SDL configuration[LOCK] (1, 1, 1, 1)
  2655.  
  2656. [SEC_INIT] Search SECRO - SB configuration[LOCK] (1, 1, 1, 1, 1, 1, 1, 1)
  2657.  
  2658. [SEC_INIT] Search SECRO - SDL configuration[UNLOCK] (2, 2, 2, 2)
  2659.  
  2660. [SEC_INIT] Search SECRO - SB configuration[UNLOCK] (2, 2, 2, 2, 2, 2, 2, 2)
  2661.  
  2662. [SEC_INIT] Search SECRO - SDL configuration[VERIFIED] (1, 1, 1, 2)
  2663.  
  2664. [SEC_INIT] Search SECRO - SB configuration[VERIFIED] (1, 1, 1, 1, 2, 2, 2, 2)
  2665.  
  2666. [SEC_INIT] Search SECRO - SDL configuration[CUSTOM] (1, 1, 1, 1)
  2667.  
  2668. [SEC_INIT] Search SECRO - SB configuration[CUSTOM] (1, 1, 1, 1, 1, 1)
  2669.  
  2670. [SEC_POLICY] lock state = 0x0(default)
  2671.  
  2672. [SEC_POLICY] use default sec policy
  2673.  
  2674. [SEC_POLICY] dl_format_lock = 0x1
  2675.  
  2676. [SEC_POLICY] dl_1st_loader_lock = 0x1
  2677.  
  2678. [SEC_POLICY] dl_2nd_loader_lock = 0x1
  2679.  
  2680. [SEC_POLICY] dl_image_lock = 0x1
  2681.  
  2682. [SEC_POLICY] dl_tee_lock = 0x1
  2683.  
  2684. [SEC_POLICY] boot_chk_2nd_loader = 0x2
  2685.  
  2686. [SEC_POLICY] boot_chk_logo = 0x2
  2687.  
  2688. [SEC_POLICY] boot_chk_bootimg = 0x2
  2689.  
  2690. [SEC_POLICY] boot_chk_recovery = 0x2
  2691.  
  2692. [SEC_POLICY] boot_chk_system = 0x2
  2693.  
  2694. [SEC_POLICY] boot_chk_others = 0x2
  2695.  
  2696. [SEC_POLICY] boot_chk_cust1 = 0x2
  2697.  
  2698. [SEC_POLICY] boot_chk_cust2 = 0x2
  2699.  
  2700. [SEC_POLICY] boot_chk_tee = 0x2
  2701.  
  2702. [SEC_POLICY] lock state = 0x0(default)
  2703.  
  2704. [SEC_POLICY] security policy backup (0)[SBC] Consume (0) ms
  2705.  
  2706. [SBC] Consume (0) ms
  2707.  
  2708. [SBC] Consume (0) ms
  2709.  
  2710.  
  2711.  
  2712. [SBC] Total Consume (2) ms
  2713.  
  2714. [SEC_POLICY] use default sec policy
  2715.  
  2716. [SEC_POLICY] dl_format_lock = 0x1
  2717.  
  2718. [SEC_POLICY] dl_1st_loader_lock = 0x1
  2719.  
  2720. [SEC_POLICY] dl_2nd_loader_lock = 0x1
  2721.  
  2722. [SEC_POLICY] dl_image_lock = 0x1
  2723.  
  2724. [SEC_POLICY] dl_tee_lock = 0x1
  2725.  
  2726. [SEC_POLICY] boot_chk_2nd_loader = 0x2
  2727.  
  2728. [SEC_POLICY] boot_chk_logo = 0x2
  2729.  
  2730. [SEC_POLICY] boot_chk_bootimg = 0x2
  2731.  
  2732. [SEC_POLICY] boot_chk_recovery = 0x2
  2733.  
  2734. [SEC_POLICY] boot_chk_system = 0x2
  2735.  
  2736. [SEC_POLICY] boot_chk_others = 0x2
  2737.  
  2738. [SEC_POLICY] boot_chk_cust1 = 0x2
  2739.  
  2740. [SEC_POLICY] boot_chk_cust2 = 0x2
  2741.  
  2742. [SEC_POLICY] boot_chk_tee = 0x2
  2743.  
  2744. [SEC_POLICY] security policy restore (0)[3820] [PART_LK][get_part] boot
  2745.  
  2746. [3820] [PART_LK][get_part] boot
  2747.  
  2748. [3820] part page addr is 0x1d80000
  2749.  
  2750.  
  2751.  
  2752. ============================================================
  2753.  
  2754. [3840] [LK_BOOT] Android Partition Name : boot
  2755.  
  2756. [3840] [LK_BOOT] Android Boot IMG Hdr - Magic : ANDROID
  2757.  
  2758. [3840] [LK_BOOT] Android Boot IMG Hdr - Kernel Size : 0x00615086
  2759.  
  2760. [3840] [LK_BOOT] Android Boot IMG Hdr - Kernel Address : 0x40080000
  2761.  
  2762. [3840] [LK_BOOT] Android Boot IMG Hdr - Rootfs Size : 0x0024259D
  2763.  
  2764. [3840] [LK_BOOT] Android Boot IMG Hdr - Rootfs Address : 0x44000000
  2765.  
  2766. [3840] [LK_BOOT] Android Boot IMG Hdr - Tags Address : 0x4E000000
  2767.  
  2768. [3840] [LK_BOOT] Android Boot IMG Hdr - Page Size : 0x00000800
  2769.  
  2770. [3840] [LK_BOOT] Android Boot IMG Hdr - Command Line : bootopt=64S3,32N2,64N2 buildvariant=userdebug
  2771.  
  2772. ============================================================
  2773.  
  2774. > page count of kernel image = 3115
  2775.  
  2776. > kernel mem offset = 0x45000000
  2777.  
  2778. > rootfs mem offset = 0x45615800
  2779.  
  2780. > boot image size = 0x858800
  2781.  
  2782. [3860] [PART_LK][get_part] boot
  2783.  
  2784. check mkimg header
  2785.  
  2786. [3860] [LK_BOOT] KERNEL partition magic not match
  2787.  
  2788. no mkimg header in kernel image
  2789.  
  2790.  
  2791.  
  2792. read the data of boot (size = 0x858800)
  2793.  
  2794. > from - 0x0000000001d80800 (skip boot img hdr)
  2795.  
  2796. > to - 0x45000000 (starts with kernel img hdr)
  2797.  
  2798. [4060] [LK_BOOT] ROOTFS partition magic not match
  2799.  
  2800. no mkimg header in ramdisk image
  2801.  
  2802. [4060] [PROFILE] ------- load boot.img takes 117 ms --------
  2803.  
  2804. [4060] [DISP]func|disp_lcm_get_name
  2805.  
  2806. [4060] [LK_DDP/RDMA] RDMA0 polling interrupt ret =19999
  2807.  
  2808. [4100] [LK_DDP/RDMA] RDMA0 polling interrupt ret =19879
  2809.  
  2810. [4120] [LK_DDP/RDMA] RDMA0 polling interrupt ret =19831
  2811.  
  2812. [4160] [LK_DDP/RDMA] RDMA0 polling interrupt ret =19830
  2813.  
  2814. [4160] mt_disp_get_lcd_time, fps=5628
  2815.  
  2816. [4160] 64 bits kernel
  2817.  
  2818. [4160] g_boot_hdr=0x41e75624
  2819.  
  2820. [4160] g_boot_hdr->kernel_size=0x00615086
  2821.  
  2822. [4160] get dtb_addr=0x45608e29, dtb_size=0x0000c25d
  2823.  
  2824. [4160] copy dtb, fdt=0x4e000000
  2825.  
  2826. [4160] zimage_addr=0x45000000, zimage_size=0x00608e26
  2827.  
  2828. [4160] decompress kernel image...[4840] dtb_addr = 0x4E000000, dtb_size = 0x0000C25D
  2829.  
  2830. [4840] [PTP][LK] first_volt = 0x58
  2831.  
  2832. [4840] [PTP][LK] second_volt = 0x50
  2833.  
  2834. [4840] [PTP][LK] third_volt = 0x48
  2835.  
  2836. [4840] [PTP][LK] have_550 = 0x1
  2837.  
  2838. [4840] [LK] hw_code = 0x335, segment = 0x24, code = 2
  2839.  
  2840. [4840] model=MT6735P
  2841.  
  2842. [4840] mblock[0].start: 0x40000000, size: 0x40000000
  2843.  
  2844. [4840] mem_reg_property[0].start_hi = 0x00000000
  2845.  
  2846. [4860] mem_reg_property[0].start_lo = 0x00000040
  2847.  
  2848. [4860] mem_reg_property[0].size_hi = 0x00000000
  2849.  
  2850. [4860] mem_reg_property[0].size_lo = 0x00000040
  2851.  
  2852. [4860] mblock[1].start: 0x80000000, size: 0x3f330000
  2853.  
  2854. [4860] mem_reg_property[1].start_hi = 0x00000000
  2855.  
  2856. [4860] mem_reg_property[1].start_lo = 0x00000080
  2857.  
  2858. [4860] mem_reg_property[1].size_hi = 0x00000000
  2859.  
  2860. [4860] mem_reg_property[1].size_lo = 0x0000333F
  2861.  
  2862. [4860] target_atag_imix_r:125
  2863.  
  2864. [4860] Not Support VCORE DVFS
  2865.  
  2866. [4860] SSSS:0x0
  2867.  
  2868. [4860] SSSS:0x0
  2869.  
  2870. [4860] SSSS:0x16
  2871.  
  2872. [4860] SSSS:0x28900010
  2873.  
  2874. [4860] SSSS:0x335
  2875.  
  2876. [4860] SSSS:0x335
  2877.  
  2878. [4870] [DISP]func|disp_lcm_get_name
  2879.  
  2880. [4880] [LK_DDP/RDMA] RDMA0 polling interrupt ret =19999
  2881.  
  2882. [4900] [LK_DDP/RDMA] RDMA0 polling interrupt ret =19883
  2883.  
  2884. [4940] [LK_DDP/RDMA] RDMA0 polling interrupt ret =19830
  2885.  
  2886. [4960] [LK_DDP/RDMA] RDMA0 polling interrupt ret =19831
  2887.  
  2888. [4960] mt_disp_get_lcd_time, fps=5628
  2889.  
  2890. [4960] videolfb - fb_base = 0xbf330000
  2891.  
  2892. [4960] videolfb - islcmfound = 1
  2893.  
  2894. [5000] [LK_DDP/RDMA] RDMA0 polling interrupt ret =19843
  2895.  
  2896. [5040] [LK_DDP/RDMA] RDMA0 polling interrupt ret =19830
  2897.  
  2898. [5070] [LK_DDP/RDMA] RDMA0 polling interrupt ret =19831
  2899.  
  2900. [5100] [LK_DDP/RDMA] RDMA0 polling interrupt ret =19830
  2901.  
  2902. [5100] mt_disp_get_lcd_time, fps=5628
  2903.  
  2904. [5100] videolfb - fps = 5628
  2905.  
  2906. [5100] videolfb - vram = 13172736
  2907.  
  2908. [5100] videolfb - lcmname = hx8394f_hd720_dsi_vdo_lide
  2909.  
  2910. [5120] Create PTP DT OK
  2911.  
  2912. [5120] tee_reserved_mem not supported
  2913.  
  2914. [5120] non_secure_sram not supported
  2915.  
  2916. [5120] [PROFILE] ------- boot_time takes 2641 ms --------
  2917.  
  2918. [LK_ENV]get_env hibboot
  2919.  
  2920. [LK_ENV]get_env resume
  2921.  
  2922. [5120] booting linux @ 0x40080000, ramdisk @ 0x44000000 (2368925)
  2923.  
  2924. [5120] [LEDS]LK: leds_deinit: LEDS off
  2925.  
  2926.  
  2927. [5120] [LEDS]LK: red level is 0
  2928.  
  2929.  
  2930. [5120] [LEDS]LK: PMIC Type: 6, Level: 0
  2931.  
  2932. [5120] [LEDS]LK: green level is 0
  2933.  
  2934.  
  2935. [5120] [LEDS]LK: PMIC Type: 6, Level: 0
  2936.  
  2937. [5120] [LEDS]LK: blue level is 0
  2938.  
  2939.  
  2940. [5120] DRAM Rank :2
  2941.  
  2942. [5120] DRAM Rank[0] Start = 0x40000000, Size = 0x40000000
  2943.  
  2944. [5120] DRAM Rank[1] Start = 0x80000000, Size = 0x3ffc0000
  2945.  
  2946. [5120] cmdline: console=tty0 console=ttyMT0,921600n1 root=/dev/ram vmalloc=496M androidboot.hardware=mt6735 slub_max_order=0 slub_debug=O bootopt=64S3,32N2,64N2 buildvariant=userdebug lcm=1-hx8394f_hd720_dsi_vdo_lide fps=5628 vram=13172736 printk.disable_uart=0 [5120] lk boot time = 2641 ms
  2947.  
  2948. [5120] lk boot mode = 0
  2949.  
  2950. [5120] lk boot reason = wdt_by_pass_pwk
  2951.  
  2952. [5120] lk finished --> jump to linux kernel 64Bit
  2953.  
  2954.  
  2955.  
  2956. [5120]
  2957.  
  2958. [LK]jump to K64 0x40080000
  2959.  
  2960. [5120] smc jump
  2961.  
  2962. [ 0.000000] <0>-(0)[0:swapper]Initializing cgroup subsys cpu
  2963.  
  2964. [ 0.000000] <0>-(0)[0:swapper]Initializing cgroup subsys cpuacct
  2965.  
  2966. [ 0.000000] <0>-(0)[0:swapper]Linux version 3.18.35+ (cvolo4yzhka@VMA) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Feb 5 14:57:13 MSK 2019
  2967.  
  2968. [ 0.000000] <0>-(0)[0:swapper]CPU: AArch64 Processor [410fd034] revision 4
  2969.  
  2970. [ 0.000000] <0>-(0)[0:swapper]Detected VIPT I-cache on CPU0
  2971.  
  2972. [ 0.000000] <0>-(0)[0:swapper]alternative: enabling workaround for ARM errata 855873
  2973.  
  2974. [ 0.000000] <0>-(0)[0:swapper]alternative: enabling workaround for ARM erratum 845719
  2975.  
  2976. [ 0.000000] <0>-(0)[0:swapper][PHY layout]atf-reserved-memory@43000000 : 0x43000000 - 0x4302ffff (0x30000)
  2977.  
  2978. [ 0.000000] <0>-(0)[0:swapper][PHY layout]reserve-memory-ccci_md1 : 0xba000000 - 0xbd80ffff (0x3810000)
  2979.  
  2980. [ 0.000000] <0>-(0)[0:swapper]Reserved memory: initialized node reserve-memory-ccci_md1, compatible id mediatek,reserve-memory-ccci_md1
  2981.  
  2982. [ 0.000000] <0>-(0)[0:swapper][PHY layout]consys-reserve-memory : 0xbf200000 - 0xbf2fffff (0x100000)
  2983.  
  2984. [ 0.000000] <0>-(0)[0:swapper][WMT-CONSYS-HW][W]reserve_memory_consys_fn: name: consys-reserve-memory, base: 0xbf200000, size: 0x100000
  2985.  
  2986. [ 0.000000] <0>-(0)[0:swapper]Reserved memory: initialized node consys-reserve-memory, compatible id mediatek,consys-reserve-memory
  2987.  
  2988. [ 0.000000] <0>-(0)[0:swapper][memblock]ram_console-reserve-memory: 0x43f00000 - 0x43f10000 (0x10000)
  2989.  
  2990. [ 0.000000] <0>-(0)[0:swapper]Reserved memory: initialized node ram_console-reserved-memory@43f00000, compatible id mediatek,ram_console
  2991.  
  2992. [ 0.000000] <0>-(0)[0:swapper][PHY layout]kernel : 0x40000000 - 0x42ffffff (0x3000000)
  2993.  
  2994. [ 0.000000] <0>-(0)[0:swapper][PHY layout]kernel : 0x43030000 - 0xb9ffffff (0x76fd0000)
  2995.  
  2996. [ 0.000000] <0>-(0)[0:swapper][PHY layout]kernel : 0xbd810000 - 0xbf1fffff (0x19f0000)
  2997.  
  2998. [ 0.000000] <0>-(0)[0:swapper][PHY layout]kernel : 0xbf300000 - 0xbf32ffff (0x30000)
  2999.  
  3000. [ 0.000000] <0>-(0)[0:swapper]psci: probing for conduit method from DT.
  3001.  
  3002. [ 0.000000] <0>-(0)[0:swapper]psci: Using PSCI v0.1 Function IDs from DT
  3003.  
  3004. [ 0.000000] <0>-(0)[0:swapper]PERCPU: Embedded 13 pages/cpu @ffffffc07f184000 s22400 r0 d30848 u53248
  3005.  
  3006. [ 0.000000] <0>-(0)[0:swapper]Built 1 zonelists in Zone order, mobility grouping on. Total pages: 499228
  3007.  
  3008. [ 0.000000] <0>-(0)[0:swapper][cpu_ntf] <00>ffffffc0001454ec (page_alloc_cpu_notify)
  3009.  
  3010. [ 0.000000] <0>-(0)[0:swapper]Kernel command line: console=tty0 console=ttyMT0,921600n1 root=/dev/ram vmalloc=496M androidboot.hardware=mt6735 slub_max_order=0 slub_debug=O bootopt=64S3,32N2,64N2 buildvariant=userdebug lcm=1-hx8394f_hd720_dsi_vdo_lide fps=5628 vram=13172736 printk.disable_uart=0 bootprof.pl_t=922 bootprof.lk_t=2641 boot_reason=4 androidboot.serialno=0123456789ABCDEF androidboot.bootreason=wdt_by_pass_pwk gpt=1
  3011.  
  3012. [ 0.000000] <0>-(0)[0:swapper]PID hash table entries: 4096 (order: 3, 32768 bytes)
  3013.  
  3014. [ 0.000000] <0>-(0)[0:swapper]Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  3015.  
  3016. [ 0.000000] <0>-(0)[0:swapper]Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  3017.  
  3018. [ 0.000000] <0>-(0)[0:swapper]Memory: 1972100K/2025408K available (9353K kernel code, 1425K rwdata, 3832K rodata, 432K init, 2414K bss, 53308K reserved)
  3019.  
  3020. [ 0.000000] <0>-(0)[0:swapper]Virtual kernel memory layout:
  3021.  
  3022. [ 0.000000] <0> vmalloc : 0xffffff8000000000 - 0xffffffbdffff0000 ( 247 GB)
  3023.  
  3024. [ 0.000000] <0> vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000 ( 7 GB maximum)
  3025.  
  3026. [ 0.000000] <0> 0xffffffbe00000000 - 0xffffffbe01bd3280 ( 27 MB actual)
  3027.  
  3028. [ 0.000000] <0> PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
  3029.  
  3030. [ 0.000000] <0> fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
  3031.  
  3032. [ 0.000000] <0> modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  3033.  
  3034. [ 0.000000] <0> memory : 0xffffffc000000000 - 0xffffffc07f330000 ( 2035 MB)
  3035.  
  3036. [ 0.000000] <0> .init : 0xffffffc000d62000 - 0xffffffc000dce000 ( 432 KB)
  3037.  
  3038. [ 0.000000] <0> .text : 0xffffffc000080000 - 0xffffffc000d617e4 ( 13190 KB)
  3039.  
  3040. [ 0.000000] <0> .data : 0xffffffc000de1000 - 0xffffffc000f45460 ( 1426 KB)
  3041.  
  3042. [ 0.000000] <0>-(0)[0:swapper][cpu_ntf] <00>ffffffc00017d720 (slab_cpuup_callback)
  3043.  
  3044. [ 0.000000] <0>-(0)[0:swapper]SLUB: HWalign=64, Order=0-0, MinObjects=0, CPUs=4, Nodes=1
  3045.  
  3046. [ 0.000000] <0>-(0)[0:swapper/0][cpu_ntf] <00>ffffffc0000c837c (sched_ilb_notifier)
  3047.  
  3048. [ 0.000000] <0>-(0)[0:swapper/0]Preemptible hierarchical RCU implementation.
  3049.  
  3050. [ 0.000000] <0>-(0)[0:swapper/0] CONFIG_RCU_FANOUT set to non-default value of 32
  3051.  
  3052. [ 0.000000] <0>-(0)[0:swapper/0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  3053.  
  3054. [ 0.000000] <0>-(0)[0:swapper/0]RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  3055.  
  3056. [ 0.000000] <0>-(0)[0:swapper/0][cpu_ntf] <00>ffffffc0000ebec8 (rcu_cpu_notify)
  3057.  
  3058. [ 0.000000] <0>-(0)[0:swapper/0][cpu_ntf] <00>ffffffc0002b9ae0 (radix_tree_callback)
  3059.  
  3060. [ 0.000000] <0>-(0)[0:swapper/0]NR_IRQS:64 nr_irqs:64 0
  3061.  
  3062. [ 0.000000] <0>-(0)[0:swapper/0][cpu_ntf] <00>ffffffc0002d9588 (gic_secondary_init)
  3063.  
  3064. [ 0.000000] <0>-(0)[0:swapper/0][cpu_ntf] <00>ffffffc0000f10c8 (timer_cpu_notify)
  3065.  
  3066. [ 0.000000] <0>-(0)[0:swapper/0][cpu_ntf] <00>ffffffc0000f3660 (hrtimer_cpu_notify)
  3067.  
  3068. [ 0.000000] <0>-(0)[0:swapper/0]cpuxgpt_r.start = 0x10200000
  3069.  
  3070. [ 0.000000] <0>-(0)[0:swapper/0]mt_gpt_init: tmr_regs=0xffffff800000a000, tmr_irq=184, freq=13000000
  3071.  
  3072. [ 0.000000] <0>-(0)[0:swapper/0]gpt_devs_init: base_addr=0xffffff800000a010
  3073.  
  3074. [ 0.000000] <0>-(0)[0:swapper/0]gpt_devs_init: base_addr=0xffffff800000a020
  3075.  
  3076. [ 0.000000] <0>-(0)[0:swapper/0]gpt_devs_init: base_addr=0xffffff800000a030
  3077.  
  3078. [ 0.000000] <0>-(0)[0:swapper/0]gpt_devs_init: base_addr=0xffffff800000a040
  3079.  
  3080. [ 0.000000] <0>-(0)[0:swapper/0]gpt_devs_init: base_addr=0xffffff800000a050
  3081.  
  3082. [ 0.000000] <0>-(0)[0:swapper/0]gpt_devs_init: base_addr=0xffffff800000a060
  3083.  
  3084. [ 0.000000] <0>-(0)[0:swapper/0]setup_clksrc1: dev->base_addr=0xffffff800000a020 GPT2_CON=0x0
  3085.  
  3086. [ 0.000000] <0>-(0)[0:swapper/0]sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 330382100403ns
  3087.  
  3088. [ 0.000008] <0>-(0)[0:swapper/0]setup_clksrc1: mt_cyclecounter.mult=0x99d89d8a mt_cyclecounter.shift=0x19
  3089.  
  3090. [ 0.000023] <0>-(0)[0:swapper/0]setup_clksrc2: dev->base_addr=0xffffff800000a020 GPT2_CON=0x31
  3091.  
  3092. [ 0.000062] <0>-(0)[0:swapper/0]GPT1_CMP = 130000, HZ = 100
  3093.  
  3094. [ 0.000137] <0>-(0)[0:swapper/0]cpuxgpt_r.start = 0x10200000
  3095.  
  3096. [ 0.000158] <0>-(0)[0:swapper/0]mt_gpt_init: get_cnt_GPT2=2005
  3097.  
  3098. [ 0.000216] <0>-(0)[0:swapper/0]arch_timer_init:arch_timer_rate(0xc65d40),PHYS_SECURE_PPI=29,PHYS_NONSECURE_PPI=30,VIRT_PPI=27,HYP_PPI=26
  3099.  
  3100. [ 0.000232] <0>-(0)[0:swapper/0]arch_timer_register:arch_timer_rate(0xc65d40),arch_timer_use_virtual=0
  3101.  
  3102. [ 0.000253] <0>-(0)[0:swapper/0]arch_timer_register:request_percpu_irq PHYS_SECURE_PPI err=0
  3103.  
  3104. [ 0.000268] <0>-(0)[0:swapper/0]arch_timer_register:request_percpu_irq PHYS_NONSECURE_PPI err=0
  3105.  
  3106. [ 0.000288] <0>-(0)[0:swapper/0][cpu_ntf] <00>ffffffc000352794 (arch_timer_cpu_notify)
  3107.  
  3108. [ 0.000613] <0>-(0)[0:swapper/0]Architected cp15 timer(s) running at 13.00MHz (phys).
  3109.  
  3110. [ 0.001362] <0>-(0)[0:swapper/0][cpu_ntf] <00>ffffffc000104090 (hotplug_cfd)
  3111.  
  3112. [ 0.081147] <0>.(0)[0:swapper/0]console [ttyMT0] enabled
  3113.  
  3114. [ 0.081815] <0>.(0)[0:swapper/0]ram_console: buffer start: 0xffffff800001a000, size: 0x10000
  3115.  
  3116. [ 0.098956] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
  3117.  
  3118. [ 0.100240] <0>.(0)[0:swapper/0]pid_max: default: 32768 minimum: 301
  3119.  
  3120. [ 0.101124] <0>.(0)[0:swapper/0][cpu_ntf] <00>ffffffc0001b1f8
  3121. [ 0.130051] <0>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc0000b2ffc (workqueue_cpu_up_callback)
  3122.  
  3123. [ 0.131078] <0>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc0000b32f0 (workqueue_cpu_down_callback)
  3124.  
  3125. [ 0.132648] <0>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc0000c3254 (migration_call)
  3126.  
  3127. [ 0.133556] <0>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc0000be93c (sched_cpu_active)
  3128.  
  3129. [ 0.134483] <0>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc0000c0a3c (sched_cpu_inactive)
  3130.  
  3131. [ 0.150095] <0>.(0)[1:swapper/0]
  3132.  
  3133. [ 0.150095] <0>**********************************************************
  3134.  
  3135. [ 0.151338] <0>.(0)[1:swapper/0]** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
  3136.  
  3137. [ 0.152361] <0>.(0)[1:swapper/0]** **
  3138.  
  3139. [ 0.153383] <0>.(0)[1:swapper/0]** trace_printk() being used. Allocating extra memory. **
  3140.  
  3141. [ 0.154406] <0>.(0)[1:swapper/0]** **
  3142.  
  3143. [ 0.155430] <0>.(0)[1:swapper/0]** This means that this is a DEBUG kernel and it is **
  3144.  
  3145. [ 0.156453] <0>.(0)[1:swapper/0]** unsafe for produciton use. **
  3146.  
  3147. [ 0.157475] <0>.(0)[1:swapper/0]** **
  3148.  
  3149. [ 0.158499] <0>.(0)[1:swapper/0]** If you see this message and you are not debugging **
  3150.  
  3151. [ 0.159522] <0>.(0)[1:swapper/0]** the kernel, report this immediately to your vendor! **
  3152.  
  3153. [ 0.160563] <0>.(0)[1:swapper/0]** **
  3154.  
  3155. [ 0.161583] <0>.(0)[1:swapper/0]** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
  3156.  
  3157. [ 0.162606] <0>.(0)[1:swapper/0]**********************************************************
  3158.  
  3159. [ 0.163800] <0>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc000133d64 (hotplug_event_notify)
  3160.  
  3161. [ 0.171495] <0>.(0)[1:swapper/0]BOOTPROF: 171.480384: ON
  3162.  
  3163. [ 0.172370] <0>.(0)[1:swapper/0]init_get_max_DRAM_size done. phone_dram_sz: 0x80000000, kernel_mem_sz: 0x7f330000
  3164.  
  3165. [ 0.173699] <0>.(0)[1:swapper/0]devinfo size:50, tag size(devinfo_lk_atag_tag_devinfo_data):3
  3166.  
  3167. [ 0.190900] <2>-(0)[1:swapper/0]SCHED: intersects new_mask: 2, cpu_active_mask: 1
  3168.  
  3169. [ 0.191034] <2>-(0)[1:swapper/0]SCHED: intersects new_mask: 2, cpu_active_mask: 1
  3170.  
  3171. [ 0.191269] <2>-(1)[0:swapper/1]CPU1: Booted secondary processor
  3172.  
  3173. [ 0.191281] <2>-(1)[0:swapper/1]Detected VIPT I-cache on CPU1
  3174.  
  3175. [ 0.191794] <2>-(1)[1:swapper/0]SCHED: intersects new_mask: 4, cpu_active_mask: 3
  3176.  
  3177. [ 0.191916] <2>-(0)[1:swapper/0]SCHED: intersects new_mask: 4, cpu_active_mask: 3
  3178.  
  3179. [ 0.192130] <2>-(2)[0:swapper/2]CPU2: Booted secondary processor
  3180.  
  3181. [ 0.192141] <2>-(2)[0:swapper/2]Detected VIPT I-cache on CPU2
  3182.  
  3183. [ 0.192623] <2>-(2)[1:swapper/0]SCHED: intersects new_mask: 8, cpu_active_mask: 7
  3184.  
  3185. [ 0.192738] <2>-(2)[1:swapper/0]SCHED: intersects new_mask: 8, cpu_active_mask: 7
  3186.  
  3187. [ 0.192945] <2>-(3)[0:swapper/3]CPU3: Booted secondary processor
  3188.  
  3189. [ 0.192956] <2>-(3)[0:swapper/3]Detected VIPT I-cache on CPU3
  3190.  
  3191. [ 0.193096] <2>.(2)[1:swapper/0]Brought up 4 CPUs
  3192.  
  3193. [ 0.203613] <2>.(2)[1:swapper/0]SMP: Total of 4 processors activated (104.00 BogoMIPS).
  3194.  
  3195. [ 0.204636] <0>-(0)[10:migration/0][name:alternative&]alternatives: patching kernel code
  3196.  
  3197. [ 0.205932] <2>.(2)[1:swapper/0][cpu_ntf] <00>ffffffc0000ba698 (sched_domains_numa_masks_update)
  3198.  
  3199. [ 0.207025] <2>.(2)[1:swapper/0][cpu_ntf] <00>ffffffc0000c4c64 (cpuset_cpu_active)
  3200.  
  3201. [ 0.207963] <2>.(2)[1:swapper/0][cpu_ntf] <00>ffffffc0000c4ccc (cpuset_cpu_inactive)
  3202.  
  3203. [ 0.209477] <2>.(2)[1:swapper/0][cpu_ntf] <00>ffffffc000310c3c (device_hotplug_notifier)
  3204.  
  3205. [ 0.221331] <2>.(2)[1:swapper/0]
  3206.  
  3207. [ 0.221331] <2> register_restart_handler- 0xffffffc00116c270, Notify call: - 0xffffffc000706b1c
  3208.  
  3209. [ 0.222841] <2>.(2)[1:swapper/0]ARCH_RESET register mtk_restart_handler ok!!!!
  3210.  
  3211. [ 0.225951] <2>.(2)[1:swapper/0]pinctrl core: initialized pinctrl subsystem
  3212.  
  3213. [ 0.227258] <2>.(2)[1:swapper/0]regulator-dummy: no parameters
  3214.  
  3215. [ 0.243915] <3>.(3)[1:swapper/0]ramoops: using module parameters
  3216.  
  3217. [ 0.244809] <3>.(3)[1:swapper/0]ramoops: pstore:address is 0x43f10000, size is 0xe0000, console_size is 0x10000, pmsg_size is 0x10000
  3218.  
  3219. [ 0.258878] <3>.(3)[1:swapper/0]console [pstore-1] enabled
  3220.  
  3221. [ 0.259681] <3>.(3)[1:swapper/0]pstore: Registered ramoops as persistent store backend
  3222.  
  3223. [ 0.260665] <3>.(3)[1:swapper/0]ramoops: attached 0xe0000@0x43f10000, ecc: 0/0
  3224.  
  3225. [ 0.261577] <3>.(3)[1:swapper/0]BOOTPROF: 261.570076:probe: probe=platform_drv_probe drv=ramoops(ffffffc000e13458) 16.756692ms
  3226.  
  3227. [ 0.263146] <3>.(3)[1:swapper/0]BOOTPROF: 263.140692:initcall: ramoops_init 19.226385ms
  3228.  
  3229. [ 0.264543] <3>.(3)[1:swapper/0][PWRAP] mt_pwrap_init
  3230.  
  3231. [ 0.265341] <3>.(3)[1:swapper/0]PWRAP reg: 0xffffff80001c4000, irq: 195
  3232.  
  3233. [ 0.266172] <3>.(3)[1:swapper/0][PWRAP] real init: version Revision
  3234.  
  3235. [ 0.266947] <3>.(3)[1:swapper/0][PWRAP] mt_pwrap_init---- debug1
  3236.  
  3237. [ 0.267856] <3>.(3)[1:swapper/0][PWRAP] is_pwrap_init_done 1
  3238.  
  3239. [ 0.268594] <3>.(3)[1:swapper/0][PWRAP] after MT6328 pwrap_write
  3240.  
  3241. [ 0.269349] <3>.(3)[1:swapper/0][PWRAP] mt_pwrap_init----
  3242.  
  3243. [ 0.270064] <3>.(3)[1:swapper/0][GPIO] 615: GPIO base addr is 0xffffff80001ca000, get_gpio_vbase_early
  3244.  
  3245. [ 0.271357] <3>.(3)[1:swapper/0][DRAMC]get CQDMA_BASE_ADDR @ ffffff80001ccc00
  3246.  
  3247. [ 0.272275] <3>.(3)[1:swapper/0][DRAMC]get DRAMCAO_BASE_ADDR @ ffffff80001ce000
  3248.  
  3249. [ 0.273232] <3>.(3)[1:swapper/0][DRAMC]get DDRPHY_BASE_ADDR @ ffffff80001d0000
  3250.  
  3251. [ 0.274157] <3>.(3)[1:swapper/0][DRAMC]get DRAMCNAO_BASE_ADDR @ ffffff80001d2000
  3252.  
  3253. [ 0.275204] <3>.(3)[1:swapper/0][DFS] enable (dram base, dram rank1 base): (0x0000000040000000,0x0000000080000000)
  3254.  
  3255. [ 0.276499] <3>.(3)[1:swapper/0][DRAMC]find dt_scan_dram_info
  3256.  
  3257. [ 0.277288] <3>.(3)[1:swapper/0][DRAMC Driver] Dram Data Rate = 1066
  3258.  
  3259. [ 0.278078] <3>.(3)[1:swapper/0][DRAMC Driver] dram can support Frequency Hopping
  3260.  
  3261. [ 0.279310] <3>.(3)[1:swapper/0]mtk_wdt_init ok
  3262.  
  3263. [ 0.293255] <3>.(3)[1:swapper/0]cpuidle: using governor mtk_governor
  3264.  
  3265. [ 0.294575] <3>.(3)[1:swapper/0]vdso: 2 pages (1 code @ ffffffc000dea000, 1 data @ ffffffc000de9000)
  3266.  
  3267. [ 0.295773] <3>.(3)[1:swapper/0]hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  3268.  
  3269. [ 0.297615] <3>.(3)[1:swapper/0]software IO TLB [mem 0x43200000-0x43400000] (2MB) mapped at [ffffffc003200000-ffffffc0033fffff]
  3270.  
  3271. [ 0.299237] <3>.(3)[1:swapper/0]DMA: preallocated 256 KiB pool for atomic allocations
  3272.  
  3273. [ 0.300295] <3>.(3)[1:swapper/0]success to create gic debug driver
  3274.  
  3275. [ 0.301067] <3>.(3)[1:swapper/0]success to create dump_irq sysfs files
  3276.  
  3277. [ 0.302051] <3>.(3)[1:swapper/0][EIC] no mediatek,max_hw_deb_cnt specified
  3278.  
  3279. [ 0.302903] <3>.(3)[1:swapper/0][EIC] setup default value
  3280.  
  3281. [ 0.303619] <3>.(3)[1:swapper/0][EIC] no max_deint_cnt specified
  3282.  
  3283. [ 0.304364] <3>.(3)[1:swapper/0][EIC] no built in eint hw deb property
  3284.  
  3285. [ 0.305173] <3>.(3)[1:swapper/0][EIC] no builtin_entry property
  3286.  
  3287. [ 0.305911] <3>.(3)[1:swapper/0][EIC] debtime_setting: entry=10, spec=0, len=20
  3288.  
  3289. [ 0.309329] <3>.(3)[1:swapper/0][SPM] find SCP_I2C0 node failed
  3290.  
  3291. [ 0.310075] <3>.(3)[1:swapper/0][SPM] base scp_i2c0_base failed
  3292.  
  3293. [ 0.311001] <3>.(3)[1:swapper/0][SPM] find SCP_I2C1 node failed
  3294.  
  3295. [ 0.311735] <3>.(3)[1:swapper/0][SPM] base scp_i2c1_base failed
  3296.  
  3297. [ 0.312658] <3>.(3)[1:swapper/0][SPM] find SCP_I2C2 node failed
  3298.  
  3299. [ 0.313390] <3>.(3)[1:swapper/0][SPM] base scp_i2c2_base failed
  3300.  
  3301. [ 0.314161] <3>.(3)[1:swapper/0][SPM] spm_base = ffffff800024c000, scp_i2c0_base = (null), scp_i2c1_base = (null), scp_i2c2_base = (null)
  3302.  
  3303. [ 0.316020] <3>.(3)[1:swapper/0][SPM] spm_irq_0 = 197, spm_irq_1 = 198, spm_irq_2 = 199, spm_irq_3 = 200
  3304.  
  3305. [ 0.317525] <3>-(3)[1:swapper/0][Power/cpufreq] [WARNING]pmic table not initialized
  3306.  
  3307. [ 0.318527] <3>-(3)[1:swapper/0][SPM] [VcoreFS] STA: 0x202, REQ: 0x0
  3308.  
  3309. [ 0.320439] <3>.(3)[1:swapper/0][Power/clkmgr] [mt_subsys_init]SYS_MD1, change state: (1->0)
  3310.  
  3311. [ 0.321949] <3>.(3)[1:swapper/0][Power/clkmgr] [00][CG_INFRA]=[0x0000008a]
  3312.  
  3313. [ 0.322806] <3>.(3)[1:swapper/0][Power/clkmgr] [01][CG_PERI ]=[0x3fc07ffc]
  3314.  
  3315. [ 0.323659] <3>.(3)[1:swapper/0][Power/clkmgr] [02][CG_DISP0]=[0xfffcb3fc][0xfffcb3fc]
  3316.  
  3317. [ 0.324673] <3>.(3)[1:swapper/0][Power/clkmgr] [03][CG_DISP1]=[0xfffffff0][0xfffffff0]
  3318.  
  3319. [ 0.325656] <3>.(3)[1:swapper/0][Power/clkmgr] [04][CG_IMAGE]=[0x000003ff]
  3320.  
  3321. [ 0.326509] <3>.(3)[1:swapper/0][Power/clkmgr] [05][CG_MFG ]=[0x00000001]
  3322.  
  3323. [ 0.327361] <3>.(3)[1:swapper/0][Power/clkmgr] [06][CG_AUDIO]=[0x0f0c0344]
  3324.  
  3325. [ 0.328215] <3>.(3)[1:swapper/0][Power/clkmgr] [07][CG_VDEC0]=[0x00000010][0x00000010]
  3326.  
  3327. [ 0.329197] <3>.(3)[1:swapper/0][Power/clkmgr] [08][CG_VDEC1]=[0x00000000][0x00000000]
  3328.  
  3329. [ 0.330178] <3>.(3)[1:swapper/0]mt_clkmgr_init: CLKMGR_INCFILE_VER=CLKMGR_INCFILE_D2_LEGACY
  3330.  
  3331. [ 0.331267] <3>.(3)[1:swapper/0]BOOTPROF: 331.260538:initcall: mt_power_management_init 23.028692ms
  3332.  
  3333. [ 0.332509] <3>.(3)[1:swapper/0][PTP] [PTP][VCORE] - Kernel Got from DT (0x58, 0x50, 0x48, 0x1)
  3334.  
  3335. [ 0.333811] <3>.(3)[1:swapper/0]### CIRQ init done. ###
  3336.  
  3337. [ 0.334517] <3>.(3)[1:swapper/0]Register the disp driver
  3338.  
  3339. [ 0.335539] <3>.(3)[1:swapper/0][DISP]init_log_buffer success
  3340.  
  3341. [ 0.336488] <3>.(3)[1:swapper/0]
  3342.  
  3343. [ 0.336488] <3> MTK_SIP_KERNEL_WDT - 0xffffffc00064fd04
  3344.  
  3345. [ 0.337545] <3>.(3)[1:swapper/0]
  3346.  
  3347. [ 0.337545] <3> atf_aee_debug_virt_addr = 0xffffff8000278000
  3348.  
  3349. [ 0.340082] mirdump: reserved 43ff0000+3000->ffffff800027d000
  3350.  
  3351. [ 0.345233] <0>.(0)[1:swapper/0]******** MTK WDT driver probe!! ********
  3352.  
  3353. [ 0.358301] <0>.(0)[1:swapper/0]mt6735 pinctrl probe
  3354.  
  3355. [ 0.358924] <0>.(0)[1:swapper/0]mtk_pctrl_init++++++
  3356.  
  3357. [ 0.382785] <1>.(1)[1:swapper/0]BOOTPROF: 382.775153:initcall: arm64_device_init 40.535462ms
  3358.  
  3359. [ 0.401653] <1>.(1)[1:swapper/0]BOOTPROF: 401.642615:initcall: param_sysfs_init 16.869231ms
  3360.  
  3361. [ 0.421524] <1>.(1)[1:swapper/0]BOOTPROF: 421.517384:initcall: pm_sysrq_init 18.691231ms
  3362.  
  3363. [ 0.423536] <1>.(1)[1:swapper/0][cpu_ntf] <00>ffffffc0002a10d8 (blk_cpu_notify)
  3364.  
  3365. [ 0.424466] <1>.(1)[1:swapper/0][cpu_ntf] <00>ffffffc0002a15f8 (blk_iopoll_cpu_notify)
  3366.  
  3367. [ 0.425461] <1>.(1)[1:swapper/0][cpu_ntf] <00>ffffffc0002a6ce8 (blk_mq_main_cpu_notify)
  3368.  
  3369. [ 0.426457] <1>.(1)[1:swapper/0][cpu_ntf] <00>ffffffc0002a4524 (blk_mq_queue_reinit_notify)
  3370.  
  3371. [ 0.428348] <1>.(1)[1:swapper/0]M4Um4u_probe 2, of_iomap: 0xffffff8000276000, irq_num: 178, pDev: ffffffc079021010
  3372.  
  3373. [ 0.429719] <1>.(1)[1:swapper/0]M4U4G DRAM Mode is: 0
  3374.  
  3375. [ 0.430760] <1>.(1)[1:swapper/0]M4Urequest_irq, irq_num=178
  3376.  
  3377. [ 0.431462] <1>.(1)[1:swapper/0]M4Uconfig_port:MDP_RDMA,v1,s0
  3378.  
  3379. [ 0.432211] <1>.(1)[1:swapper/0]M4Uconfig_port:MDP_WDMA,v1,s0
  3380.  
  3381. [ 0.432933] <1>.(1)[1:swapper/0]M4Uconfig_port:MDP_WROT,v1,s0
  3382.  
  3383. [ 0.434269] <1>.(1)[1:swapper/0]MMP: MMProfileEnable(): enable: 1
  3384.  
  3385. [ 0.435039] <1>.(1)[1:swapper/0]MMP: MMProfileForceStart(): start: 1
  3386.  
  3387. [ 0.445221] <1>.(1)[1:swapper/0]BOOTPROF: 445.212384:initcall: MTK_M4U_Init 17.351000ms
  3388.  
  3389. [ 0.446437] <1>.(1)[1:swapper/0][GPIO] 596: GPIO base addr is 0xffffff80001ca000, get_gpio_vbase
  3390.  
  3391. [ 0.448784] <1>.(1)[1:swapper/0][CMDQ][CMDQ] platform_dev: dev: ffffffc079028010, PA: 10217000, VA: ffffff80002b6000, irqId: 183, irqSecId:180
  3392.  
  3393. [ 0.450385] <1>.(1)[1:swapper/0][CMDQ]set dma mask result: 0
  3394.  
  3395. [ 0.451345] <1>.(1)[1:swapper/0][CMDQ]DEV: VA(mediatek,mmsys_config): 0xffffff80002b8000
  3396.  
  3397. [ 0.452585] <1>.(1)[1:swapper/0][CMDQ]DEV: VA(mediatek,mdp_rdma): 0xffffff80002ba000
  3398.  
  3399. [ 0.453717] <1>.(1)[1:swapper/0][CMDQ]DEV: VA(mediatek,mdp_rsz0): 0xffffff80002bc000
  3400.  
  3401. [ 0.454844] <1>.(1)[1:swapper/0][CMDQ]DEV: VA(mediatek,mdp_rsz1): 0xffffff80002be000
  3402.  
  3403. [ 0.455973] <1>.(1)[1:swapper/0][CMDQ]DEV: VA(mediatek,mdp_wdma): 0xffffff80002c0000
  3404.  
  3405. [ 0.457100] <1>.(1)[1:swapper/0][CMDQ]DEV: VA(mediatek,mdp_wrot): 0xffffff80002c2000
  3406.  
  3407. [ 0.458240] <1>.(1)[1:swapper/0][CMDQ]DEV: VA(mediatek,mdp_tdshp): 0xffffff80002c4000
  3408.  
  3409. [ 0.459402] <1>.(1)[1:swapper/0][CMDQ]DEV: VA(mediatek,VENC): 0xffffff80002c6000
  3410.  
  3411. [ 0.463544] <1>.(1)[1:swapper/0]MMP: MMProfileEnable(): enable: 1
  3412.  
  3413. [ 0.464340] <1>.(1)[1:swapper/0]MMP: MMProfileForceStart(): start: 1
  3414.  
  3415. [ 0.465435] <3>.(3)[1:swapper/0]BOOTPROF: 465.426000:probe: probe=platform_drv_probe drv=mtk_cmdq(ffffffc000e458b8) 16.734231ms
  3416.  
  3417. [ 0.467651] <3>.(3)[1:swapper/0]BOOTPROF: 467.644230:initcall: cmdq_init 19.285770ms
  3418.  
  3419. [ 0.469204] <3>.(3)[1:swapper/0][Power/clkmgr] register_larb_monitor
  3420.  
  3421. [ 0.471522] <3>.(3)[1:swapper/0][ccci0/util]Using default META MD setting[0][0]
  3422.  
  3423. [ 0.474659] <3>.(3)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:init message queue list succeed
  3424.  
  3425. [ 0.475746] <3>.(3)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:init active queue list succeed
  3426.  
  3427. [ 0.476783] <3>.(3)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:init user information list succeed
  3428.  
  3429. [ 0.477911] <3>.(3)[1:swapper/0][CONN_MD_DMP][I]conn_md_dmp_init:alloc memory for msg log system done, size:0x00000430
  3430.  
  3431. [ 0.479239] <3>.(3)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:conn_md_dmp_init succeed
  3432.  
  3433. [ 0.480310] <3>.(3)[1:swapper/0][CONN-MD-DFT][I]conn_md_init:create conn_md_thread succeed, wakeup it
  3434.  
  3435. [ 0.481576] <3>.(3)[1:swapper/0][cpu_ntf] <00>ffffffc00062d7c8 (dbgregs_hotplug_callback)
  3436.  
  3437. [ 0.483056] <3>.(3)[1:swapper/0]SCSI subsystem initialized
  3438.  
  3439. [ 0.483890] <3>.(3)[1:swapper/0]usbcore: registered new interface driver usbfs
  3440.  
  3441. [ 0.484837] <3>.(3)[1:swapper/0]usbcore: registered new interface driver hub
  3442.  
  3443. [ 0.485853] <3>.(3)[1:swapper/0]usbcore: registered new device driver usb
  3444.  
  3445. [ 0.487792] <3>.(3)[1:swapper/0]Advanced Linux Sound Architecture Driver Initialized.
  3446.  
  3447. [ 0.489305] <3>.(3)[1:swapper/0][cpu_ntf] <00>ffffffc0008255c0 (dev_cpu_callback)
  3448.  
  3449. [ 0.490690] <3>.(3)[1:swapper/0]------------[ cut here ]------------
  3450.  
  3451. [ 0.491487] <3>.(3)[1:swapper/0]WARNING: CPU: 3 PID: 1 at ../net/wireless/reg.c:511 regulatory_init+0x90/0x12c()
  3452.  
  3453. [ 0.492745] db.txt is empty, you should update it...
  3454.  
  3455. [ 0.493346] <3>-(3)[1:swapper/0]CPU: 3 PID: 1 Comm: swapper/0 Not tainted 3.18.35+ #1
  3456.  
  3457. [ 0.494331] <3>-(3)[1:swapper/0]Hardware name: MT6735P (DT)
  3458.  
  3459. [ 0.495021] <3>-(3)[1:swapper/0]Call trace:
  3460.  
  3461. [ 0.495545] <3>-(3)[1:swapper/0][<ffffffc000088b04>] dump_backtrace+0x0/0x140
  3462.  
  3463. [ 0.496433] <3>-(3)[1:swapper/0][<ffffffc000088c58>] show_stack+0x14/0x1c
  3464.  
  3465. [ 0.497279] <3>-(3)[1:swapper/0][<ffffffc00098d18c>] dump_stack+0x80/0xa4
  3466.  
  3467. [ 0.498124] <3>-(3)[1:swapper/0][<ffffffc00009be78>] warn_slowpath_common+0x88/0xb0
  3468.  
  3469. [ 0.499077] <3>-(3)[1:swapper/0][<ffffffc00009bf1c>] warn_slowpath_fmt+0x50/0x58
  3470.  
  3471. [ 0.499997] <3>-(3)[1:swapper/0][<ffffffc000daba40>] regulatory_init+0x90/0x12c
  3472.  
  3473. [ 0.500906] <3>-(3)[1:swapper/0][<ffffffc000dab93c>] cfg80211_init+0x70/0xe4
  3474.  
  3475. [ 0.501784] <3>-(3)[1:swapper/0][<ffffffc000d62a9c>] do_one_initcall+0x110/0x1b4
  3476.  
  3477. [ 0.502703] <3>-(3)[1:swapper/0][<ffffffc000d62c88>] kernel_init_freeable+0x148/0x1e8
  3478.  
  3479. [ 0.503678] <3>-(3)[1:swapper/0][<ffffffc0009886b8>] kernel_init+0x14/0xe4
  3480.  
  3481. [ 0.504570] <3>.(3)[1:swapper/0]---[ end trace ef66fe7691e36cdd ]---
  3482.  
  3483. [ 0.505543] <3>.(3)[21:kworker/3:0]cfg80211: Calling CRDA to update world regulatory domain
  3484.  
  3485. [ 0.505571] <3>.(0)[1:swapper/0]BOOTPROF: 505.563615:initcall: cfg80211_init 15.157693ms
  3486.  
  3487. [ 0.508310] <0>.(0)[1:swapper/0]Switched to clocksource mt6735-gpt
  3488.  
  3489. [ 0.551664] <0>.(0)[1:swapper/0]BOOTPROF: 551.653077:initcall: event_trace_init 41.759846ms
  3490.  
  3491. [ 0.554438] <0>.(0)[1:swapper/0] pimix=125
  3492.  
  3493. [ 0.556113] <0>-(0)[1:swapper/0]mtk_rtc_hal_common: rtc_spare_reg[12] = {16432, 1, 6}
  3494.  
  3495. [ 0.558103] <1>.(1)[1:swapper/0]vtcxo_1: 2800 mV
  3496.  
  3497. [ 0.559346] <1>.(1)[1:swapper/0]vaud28: 2800 mV
  3498.  
  3499. [ 0.560080] <1>.(1)[1:swapper/0]vcn28: 2800 mV
  3500.  
  3501. [ 0.560837] <1>.(1)[1:swapper/0]vcama: 1500 <--> 2800 mV at 2800 mV
  3502.  
  3503. [ 0.561823] <1>.(1)[1:swapper/0]vcn33_bt: 3300 <--> 3600 mV at 3300 mV
  3504.  
  3505. [ 0.562836] <1>.(1)[1:swapper/0]vcn33_wifi: 3300 <--> 3600 mV at 3300 mV
  3506.  
  3507. [ 0.564275] <1>.(1)[1:swapper/0]vusb33: 3300 mV
  3508.  
  3509. [ 0.565429] <1>.(1)[1:swapper/0]vemc_3v3: 1800 <--> 3300 mV at 3000 mV
  3510.  
  3511. [ 0.566453] <1>.(1)[1:swapper/0]vmch: 2900 <--> 3300 mV at 2900 mV
  3512.  
  3513. [ 0.567426] <1>.(1)[1:swapper/0]vmc: 1800 <--> 3300 mV at 2900 mV
  3514.  
  3515. [ 0.568432] <1>.(1)[1:swapper/0]vcamaf: 1200 <--> 3300 mV at 2800 mV
  3516.  
  3517. [ 0.569435] <1>.(1)[1:swapper/0]vgp1: 1200 <--> 3300 mV at 2800 mV
  3518.  
  3519. [ 0.570403] <1>.(1)[1:swapper/0]vibr: 1200 <--> 3300 mV at 2800 mV
  3520.  
  3521. [ 0.571385] <1>.(1)[1:swapper/0]vcamd: 900 <--> 1500 mV at 1300 mV
  3522.  
  3523. [ 0.572360] <1>.(1)[1:swapper/0]vrf18_1: 1200 <--> 1825 mV at 1800 mV
  3524.  
  3525. [ 0.573359] <1>.(1)[1:swapper/0]vcn18: 1800 mV
  3526.  
  3527. [ 0.574088] <1>.(1)[1:swapper/0]vcamio: 1200 <--> 1800 mV at 1800 mV
  3528.  
  3529. [ 0.575452] <1>.(1)[1:swapper/0]vsram: 700 <--> 1493 mV at 1350 mV
  3530.  
  3531. [ 0.576835] <1>.(1)[1:swapper/0]vm: 1240 <--> 1540 mV at 1240 mV
  3532.  
  3533. [ 0.577818] <1>.(1)[1:swapper/0]Reg[0xec2]=0x8a12, Reg[0xec4]=0xb9a1, Reg[0x2ac]=0x8f
  3534.  
  3535. [ 0.578819] <1>.(1)[1:swapper/0][low_battery_protect_init] 3400 mV, 3250 mV, 3100 mV
  3536.  
  3537. [ 0.579834] <1>.(1)[1:swapper/0]Reg[0xcd2]=0xd87f, Reg[0xcd4]=0xd186, Reg[0x2b8]=0x840
  3538.  
  3539. [ 0.580815] <1>.(1)[1:swapper/0][battery_oc_protect_init] 3400 mA, 4000 mA
  3540.  
  3541. [ 0.581807] <0>.(0)[1:swapper/0]Create bat_percent_notify_thread : done
  3542.  
  3543. [ 0.582734] <1>.(1)[1:swapper/0]Create dlpt_notify_thread : done
  3544.  
  3545. [ 0.583503] <1>.(1)[1:swapper/0]POWER_UVLO_VOLT_LEVEL=2600, [0xf6a]=0x2
  3546.  
  3547. [ 0.584909] <1>.(1)[1:swapper/0]BOOTPROF: 584.902231:probe: probe=platform_drv_probe drv=mt-pmic(ffffffc000e3dc10) 30.594385ms
  3548.  
  3549. [ 0.587467] <1>.(1)[1:swapper/0][PMIC]pmic_mt_cust_probe done
  3550.  
  3551. [ 0.588269] <1>.(1)[1:swapper/0]BOOTPROF: 588.262154:initcall: pmic_mt_init 34.390154ms
  3552.  
  3553. [ 0.590371] <1>.(1)[1:swapper/0][MUSB]mt_usb_dts_probe 1419: first_connect, check_delay_done to 0
  3554.  
  3555. [ 0.591474] <1>.(1)[1:swapper/0][MUSB]mt_usb_dts_probe 1423: set musb_connect_legacy to 0
  3556.  
  3557. [ 0.592488] <1>.(1)[1:swapper/0][MUSB]mt_usb_dts_probe 1425: init connection_work
  3558.  
  3559. [ 0.593416] <1>.(1)[1:swapper/0][MUSB]mt_usb_dts_probe 1427: keep musb->power & mtk_usb_power in the samae value
  3560.  
  3561. [ 0.595389] <1>.(1)[1:swapper/0][MUSB]mt_usb_probe 1389: USB probe done!
  3562.  
  3563. [ 0.597099] <0>.(0)[1:swapper/0][ION]ion_init()
  3564.  
  3565. [ 0.598092] <0>.(0)[1:swapper/0][ION]ion_drv_probe() heap_nr=5
  3566.  
  3567. [ 0.598999] <0>.(0)[1:swapper/0]ion_heap_create: Heap type is disabled: 1
  3568.  
  3569. [ 0.599845] <0>.(0)[1:swapper/0]ion_mtk_heap_create: error creating heap ion_system_contig_heap type 1 base 0 size 0
  3570.  
  3571. [ 0.601509] <0>.(0)[1:swapper/0][ION]ion_sec_heap_create error: not support
  3572.  
  3573. [ 0.602376] <0>.(0)[1:swapper/0]ion_mtk_heap_create: error creating heap ion_sec_heap type 13 base 0 size 0
  3574.  
  3575. [ 0.603841] <1>.(1)[1:swapper/0]MMP: MMProfileEnable(): enable: 1
  3576.  
  3577. [ 0.604630] <1>.(1)[1:swapper/0]MMP: MMProfileForceStart(): start: 1
  3578.  
  3579. [ 0.606421] <1>.(1)[1:swapper/0]TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  3580.  
  3581. [ 0.607742] <1>.(1)[1:swapper/0]TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  3582.  
  3583. [ 0.609215] <3>.(3)[1:swapper/0]TCP: Hash tables configured (established 16384 bind 16384)
  3584.  
  3585. [ 0.610341] <3>.(3)[1:swapper/0]TCP: reno registered
  3586.  
  3587. [ 0.610964] <3>.(3)[1:swapper/0]UDP hash table entries: 1024 (order: 3, 32768 bytes)
  3588.  
  3589. [ 0.611983] <3>.(3)[1:swapper/0]UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  3590.  
  3591. [ 0.613664] <3>.(3)[1:swapper/0]Unpacking initramfs...
  3592.  
  3593. [ 0.755941] <0>.(0)[1:swapper/0]Freeing initrd memory: 2312K (ffffffc004000000 - ffffffc004242000)
  3594.  
  3595. [ 0.757078] <0>.(0)[1:swapper/0]BOOTPROF: 757.071693:initcall: populate_rootfs 143.682923ms
  3596.  
  3597. [ 0.762121] <1>.(1)[1:swapper/0]futex hash table entries: 1024 (order: 4, 65536 bytes)
  3598.  
  3599. [ 0.763181] <1>.(1)[1:swapper/0]audit: initializing netlink subsys (disabled)
  3600.  
  3601. [ 0.764138] <1>.(1)[1:swapper/0]audit: type=2000 audit(0.740:1): initialized
  3602.  
  3603. [ 0.765634] <1>.(1)[1:swapper/0][cpu_ntf] <00>ffffffc000150490 (cpu_callback)
  3604.  
  3605. [ 0.776742] <3>.(3)[1:swapper/0]fuse init (API version 7.23)
  3606.  
  3607. [ 0.781112] <3>.(3)[1:swapper/0]io scheduler noop registered
  3608.  
  3609. [ 0.781832] <3>.(3)[1:swapper/0]io scheduler deadline registered
  3610.  
  3611. [ 0.782891] <3>.(3)[1:swapper/0]io scheduler cfq registered (default)
  3612.  
  3613. [ 0.783745] <3>.(3)[1:swapper/0][cpu_ntf] <00>ffffffc0002d2e0c (percpu_counter_hotcpu_callback)
  3614.  
  3615. [ 0.790224] <3>.(3)[1:swapper/0]loop: module loaded
  3616.  
  3617. [ 0.791322] <3>.(3)[1:swapper/0]zram: Created 1 device(s) ...
  3618.  
  3619. [ 0.793100] <3>.(3)[1:swapper/0][register_dlpt_notify] prio_val=0
  3620.  
  3621. [ 0.793995] <3>.(3)[1:swapper/0][PBM] pbm_module_init : Done
  3622.  
  3623. [ 0.794725] <3>.(3)[1:swapper/0][VcoreFS] curr_vcore_uv: 1100000, curr_ddr_khz: 1066000
  3624.  
  3625. [ 0.795721] <3>.(3)[1:swapper/0][VcoreFS] OPP 0: vcore_uv = 1150000, ddr_khz = 1066000
  3626.  
  3627. [ 0.796702] <3>.(3)[1:swapper/0][VcoreFS] OPP 1: vcore_uv = 1100000, ddr_khz = 1066000
  3628.  
  3629. [ 0.797683] <3>.(3)[1:swapper/0][VcoreFS] OPP 2: vcore_uv = 1050000, ddr_khz = 800000
  3630.  
  3631. [ 0.798703] <3>.(3)[1:swapper/0][VcoreFS] UHPM : 1150000 (0x58)
  3632.  
  3633. [ 0.799447] <3>.(3)[1:swapper/0][VcoreFS] TRANS4: 1133332 (0x56)
  3634.  
  3635. [ 0.800190] <3>.(3)[1:swapper/0][VcoreFS] TRANS3: 1116666 (0x53)
  3636.  
  3637. [ 0.800934] <3>.(3)[1:swapper/0][VcoreFS] HPM : 1100000 (0x50)
  3638.  
  3639. [ 0.801677] <3>.(3)[1:swapper/0][VcoreFS] TRANS2: 1083332 (0x4e)
  3640.  
  3641. [ 0.802421] <3>.(3)[1:swapper/0][VcoreFS] TRANS1: 1066666 (0x4b)
  3642.  
  3643. [ 0.803164] <3>.(3)[1:swapper/0][VcoreFS] LPM : 1050000 (0x48)
  3644.  
  3645. [ 0.803986] <3>.(3)[1:swapper/0][Power/gpufreq] @_mt_gpufreq_init
  3646.  
  3647. [ 0.805293] <3>.(3)[1:swapper/0][Power/gpufreq] setup gpufreqs table
  3648.  
  3649. [ 0.806449] <3>.(3)[1:swapper/0][Power/gpufreq] GPU clock-frequency from DT = 450 MHz
  3650.  
  3651. [ 0.807420] <3>.(3)[1:swapper/0][Power/gpufreq] @_mt_gpufreq_get_dvfs_table_type: mmpll_spd_bond = 0x0
  3652.  
  3653. [ 0.808612] <3>.(3)[1:swapper/0][Power/gpufreq] @_mt_gpufreq_get_dvfs_table_type: gpu_550m_enable = 1
  3654.  
  3655. [ 0.809757] <3>.(3)[1:swapper/0][Power/gpufreq] @_mt_gpufreq_get_dvfs_table_type: segment_code = 0x12
  3656.  
  3657. [ 0.810903] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs[0].gpufreq_khz = 549250
  3658.  
  3659. [ 0.811851] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs[0].gpufreq_volt = 115000
  3660.  
  3661. [ 0.812811] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs[1].gpufreq_khz = 448500
  3662.  
  3663. [ 0.813759] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs[1].gpufreq_volt = 110000
  3664.  
  3665. [ 0.814719] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs[2].gpufreq_khz = 299000
  3666.  
  3667. [ 0.815667] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs[2].gpufreq_volt = 105000
  3668.  
  3669. [ 0.816627] <3>.(3)[1:swapper/0][Power/gpufreq] @_mt_setup_gpufreqs_power_table: temp = 0
  3670.  
  3671. [ 0.817643] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[0].gpufreq_khz = 549250
  3672.  
  3673. [ 0.818676] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[0].gpufreq_volt = 115000
  3674.  
  3675. [ 0.819701] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[0].gpufreq_power = 442
  3676.  
  3677. [ 0.820704] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[1].gpufreq_khz = 448500
  3678.  
  3679. [ 0.821717] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[1].gpufreq_volt = 115000
  3680.  
  3681. [ 0.822740] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[1].gpufreq_power = 359
  3682.  
  3683. [ 0.823743] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[2].gpufreq_khz = 448500
  3684.  
  3685. [ 0.824755] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[2].gpufreq_volt = 110000
  3686.  
  3687. [ 0.825779] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[2].gpufreq_power = 331
  3688.  
  3689. [ 0.826781] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[3].gpufreq_khz = 299000
  3690.  
  3691. [ 0.827794] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[3].gpufreq_volt = 115000
  3692.  
  3693. [ 0.828837] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[3].gpufreq_power = 240
  3694.  
  3695. [ 0.829841] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[4].gpufreq_khz = 299000
  3696.  
  3697. [ 0.830854] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[4].gpufreq_volt = 110000
  3698.  
  3699. [ 0.831877] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[4].gpufreq_power = 224
  3700.  
  3701. [ 0.832880] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[5].gpufreq_khz = 299000
  3702.  
  3703. [ 0.833893] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[5].gpufreq_volt = 105000
  3704.  
  3705. [ 0.834916] <3>.(3)[1:swapper/0][Power/gpufreq] mt_gpufreqs_power[5].gpufreq_power = 197
  3706.  
  3707. [ 0.835972] <3>.(3)[1:swapper/0][Power/gpufreq] GPU current frequency = 448500KHz
  3708.  
  3709. [ 0.836905] <3>.(3)[1:swapper/0][Power/gpufreq] Current Vcore = 1100mV
  3710.  
  3711. [ 0.837712] <3>.(3)[1:swapper/0][Power/gpufreq] g_cur_gpu_OPPidx = 1
  3712.  
  3713. [ 0.838645] <3>.(3)[1:swapper/0][register_low_battery_notify] prio_val=2
  3714.  
  3715. [ 0.839476] <3>.(3)[1:swapper/0][register_battery_percent_notify] prio_val=2
  3716.  
  3717. [ 0.840367] <3>.(3)[1:swapper/0]BOOTPROF: 840.360308:probe: probe=platform_drv_probe drv=mt-gpufreq(ffffffc000e30700) 35.086693ms
  3718.  
  3719. [ 0.841963] <3>.(3)[1:swapper/0]BOOTPROF: 841.957539:initcall: _mt_gpufreq_init 37.968538ms
  3720.  
  3721. [ 0.843107] <3>.(3)[1:swapper/0][HPS] hps_init
  3722.  
  3723. [ 0.843656] <3>.(3)[1:swapper/0][HPS] hps_cpu_init
  3724.  
  3725. [ 0.844251] <3>.(3)[1:swapper/0][HPS] hps_ctxt.little_cpumask: 0-3
  3726.  
  3727. [ 0.845016] <3>.(3)[1:swapper/0][HPS] hps_ctxt.big_cpumask:
  3728.  
  3729. [ 0.845719] <3>.(3)[1:swapper/0][HPS] hps_cpu_init: little_cpu_id_min: 0, little_cpu_id_max: 3, big_cpu_id_min: 0, big_cpu_id_max: 0
  3730.  
  3731. [ 0.847195] <3>.(3)[1:swapper/0][HPS] hps_core_init
  3732.  
  3733. [ 0.847896] <3>.(3)[1:swapper/0][HPS] hps_task_start success, ptr: ffffffc003122000, pid: 98
  3734.  
  3735. [ 0.847913] <3>.(0)[98:hps_main][HPS] hps_ctxt.init_state: 0
  3736.  
  3737. [ 0.847919] <3>.(0)[98:hps_main][HPS] hps_ctxt.state: 0
  3738.  
  3739. [ 0.847925] <3>.(0)[98:hps_main][HPS] hps_ctxt.enabled: 1
  3740.  
  3741. [ 0.847930] <3>.(0)[98:hps_main][HPS] hps_ctxt.suspend_enabled: 1
  3742.  
  3743. [ 0.847935] <3>.(0)[98:hps_main][HPS] hps_ctxt.is_hmp: 0
  3744.  
  3745. [ 0.847940] <3>.(0)[98:hps_main][HPS] hps_ctxt.little_cpu_id_min: 0
  3746.  
  3747. [ 0.847946] <3>.(0)[98:hps_main][HPS] hps_ctxt.little_cpu_id_max: 3
  3748.  
  3749. [ 0.847951] <3>.(0)[98:hps_main][HPS] hps_ctxt.big_cpu_id_min: 0
  3750.  
  3751. [ 0.847957] <3>.(0)[98:hps_main][HPS] hps_ctxt.big_cpu_id_max: 0
  3752.  
  3753. [ 0.855419] <3>.(3)[1:swapper/0][HPS] hps_procfs_init
  3754.  
  3755. [ 0.856653] <3>.(3)[1:swapper/0][HPS] hps_probe
  3756.  
  3757. [ 0.857409] <3>.(3)[1:swapper/0]MT_SCHED: Init complete, device major number = 248
  3758.  
  3759. [ 0.858395] <3>.(3)[1:swapper/0][cpu_ntf] <00>ffffffc00034fc0c (sched_cpu_notify)
  3760.  
  3761. [ 0.859647] <3>.(3)[1:swapper/0]11002000.apuart0: ttyMT0 at MMIO 0x11002000 (irq = 123, base_baud = 1625000) is a MTK UART
  3762.  
  3763. [ 0.861315] <3>.(3)[1:swapper/0]11003000.apuart1: ttyMT1 at MMIO 0x11003000 (irq = 124, base_baud = 1625000) is a MTK UART
  3764.  
  3765. [ 0.862999] <3>.(3)[1:swapper/0]11004000.apuart2: ttyMT2 at MMIO 0x11004000 (irq = 125, base_baud = 1625000) is a MTK UART
  3766.  
  3767. [ 0.864684] <3>.(3)[1:swapper/0]11005000.apuart3: ttyMT3 at MMIO 0x11005000 (irq = 126, base_baud = 1625000) is a MTK UART
  3768.  
  3769. [ 0.870190] <3>.(3)[1:swapper/0][MT AUXADC_probe3] get device tree info : start !!
  3770.  
  3771. [ 0.871217] <3>.(3)[1:swapper/0][AUXADC_AP] find node TEMPERATURE:0
  3772.  
  3773. [ 0.871994] <3>.(3)[1:swapper/0][AUXADC_AP] find node TEMPERATURE1:1
  3774.  
  3775. [ 0.872782] <3>.(3)[1:swapper/0][AUXADC_AP] find node ADC_FDD_RF_PARAMS_DYNAMIC_CUSTOM_CH:12
  3776.  
  3777. [ 0.873838] <3>.(3)[1:swapper/0][MT AUXADC_AP] adc_channel_info_init : done !!
  3778.  
  3779. [ 0.874764] <3>.(3)[1:swapper/0]proc_create auxadc_debug_proc_fops
  3780.  
  3781. [ 0.875729] <3>.(3)[1:swapper/0]mt-auxadc: probe of 11001000.adc_hw failed with error -22
  3782.  
  3783. [ 0.879043] <3>.(3)[1:swapper/0]i2c-core: driver [LIS3DH] using legacy suspend method
  3784.  
  3785. [ 0.880021] <3>.(3)[1:swapper/0]i2c-core: driver [LIS3DH] using legacy830] <3>.(3)[1:swapper/0] efusevalue = 0xfffff800, accdet_auxadc_offset = -4
  3786.  
  3787. [ 0.927035] <3>.(3)[1:swapper/0][Accdet]accdet_setup_eint
  3788.  
  3789. [ 0.930059] <3>.(3)[1:swapper/0][Accdet]accdet set EINT finished, accdet_irq=294, headsetdebounce=256000
  3790.  
  3791. [ 0.931238] <3>.(3)[1:swapper/0][Accdet]accdet_probe done!
  3792.  
  3793. [ 0.932892] <3>.(3)[1:swapper/0][Accdet]platform_driver_register done!
  3794.  
  3795. [ 0.933701] <3>.(3)[1:swapper/0][Accdet]accdet_mod_init done!
  3796.  
  3797. [ 0.934427] <3>.(3)[1:swapper/0]BOOTPROF: 934.420232:initcall: accdet_mod_init 18.813693ms
  3798.  
  3799. [ 0.937817] mtk_rtc_common: rtc_init
  3800.  
  3801. [ 0.939855] <3>.(3)[1:swapper/0]mtk_rtc_common: read al time = 1970/01/01 00:00:00 (0)
  3802.  
  3803. [ 0.941811] <3>.(3)[1:swapper/0]mt-rtc mt-rtc: rtc core: registered mt-rtc as rtc0
  3804.  
  3805. [ 0.943323] <3>.(3)[1:swapper/0]musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  3806.  
  3807. [ 0.944911] <3>.(3)[1:swapper/0]musb probe
  3808.  
  3809. [ 0.945420] <3>.(3)[1:swapper/0][MUSB]musb_probe 2469: musb_removed to 0
  3810.  
  3811. [ 0.946251] <3>.(3)[1:swapper/0][MUSB]musb_probe 2472: dts node from dts_np
  3812.  
  3813. [ 0.947190] <3>.(3)[1:swapper/0]musb probe reg: 0xffffff8011180000 ,0xffffff80111a0000 , irq: 0x104
  3814.  
  3815. [ 0.948600] <3>.(3)[1:swapper/0][MUSB]mt_usb_init 1163: mt_usb_init
  3816.  
  3817. [ 0.949542] <3>.(3)[1:swapper/0]usb_phy_generic.1.auto supply vcc not found, using dummy regulator
  3818.  
  3819. [ 0.950820] <3>.(3)[1:swapper/0][MUSB]mt_usb_init 1209: regulator set vol ok, <3300000,3300000>
  3820.  
  3821. [ 0.951909] <3>.(3)[1:swapper/0][MUSB]mt_usb_init 1215: enable USB regulator
  3822.  
  3823. [ 0.952902] <3>.(3)[1:swapper/0][MUSB]mt_usb_init 1227: musb platform init ff00
  3824.  
  3825. [ 0.955744] <3>.(3)[1:swapper/0][MUSB]mt_usb_enable 345: begin <0,0>,<1,0,0,0>
  3826.  
  3827. [ 0.966845] <3>.(3)[1:swapper/0][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  3828.  
  3829. [ 0.969029] <3>.(3)[1:swapper/0][MUSB]HQA_special 35: HQA, 0x18, before:88
  3830.  
  3831. [ 0.969884] <3>.(3)[1:swapper/0][MUSB]HQA_special 39: HQA, 0x18, after:86
  3832.  
  3833. [ 0.970740] <3>.(3)[1:swapper/0][MUSB]hs_slew_rate_cal 282: [USBPHY]slew calibration:FM_OUT =327,x=4208,value=4
  3834.  
  3835. [ 0.971995] <3>.(3)[1:swapper/0][MUSB]usb_phy_recover 621: usb recovery success
  3836.  
  3837. [ 0.972902] <3>.(3)[1:swapper/0][MUSB]mt_usb_enable 369: end, <1,0,1,0>
  3838.  
  3839. [ 0.974156] <3>.(3)[51:kworker/3:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:NO-CDEV
  3840.  
  3841. [ 0.974195] <3>.(1)[1:swapper/0][MUSB]mt_usb_disable 378: begin, <1,1>,<1,1,1,0>
  3842.  
  3843. [ 0.974256] <3>.(1)[1:swapper/0][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  3844.  
  3845. [ 0.975071] <3>.(1)[1:swapper/0][MUSB]usb_phy_savecurrent_internal 512: usb_phy_savecurrent_internal:512 - SWITCH to UART MODE after savecurrent!
  3846.  
  3847. [ 0.975089] <3>.(1)[1:swapper/0][MUSB]usb_phy_savecurrent 528: usb save current success
  3848.  
  3849. [ 0.975097] <3>.(1)[1:swapper/0][MUSB]mt_usb_disable 384: end, <1,1,1,1>
  3850.  
  3851. [ 0.975225] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1784: musb-hdrc: ConfigData=0x1f (UTMI-16, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
  3852.  
  3853. [ 0.975295] <3>.(1)[1:swapper/0][MUSB]fifo_setup 1486: Tx ep 1 fifo size is 512 fifo address is 8
  3854.  
  3855. [ 0.975303] <3>.(1)[1:swapper/0][MUSB]fifo_setup 1496: Rx ep 1 fifo size is 512 fifo address is 48
  3856.  
  3857. [ 0.975311] <3>.(1)[1:swapper/0][MUSB]fifo_setup 1486: Tx ep 2 fifo size is 512 fifo address is 88
  3858.  
  3859. [ 0.975318] <3>.(1)[1:swapper/0][MUSB]fifo_setup 1496: Rx ep 2 fifo size is 512 fifo address is c8
  3860.  
  3861. [ 0.975326] <3>.(1)[1:swapper/0][MUSB]fifo_setup 1486: Tx ep 3 fifo size is 512 fifo address is 108
  3862.  
  3863. [ 0.975334] <3>.(1)[1:swapper/0][MUSB]fifo_setup 1496: Rx ep 3 fifo size is 512 fifo address is 148
  3864.  
  3865. [ 0.975341] <3>.(1)[1:swapper/0][MUSB]fifo_setup 1486: Tx ep 4 fifo size is 512 fifo address is 188
  3866.  
  3867. [ 0.975349] <3>.(1)[1:swapper/0][MUSB]fifo_setup 1496: Rx ep 4 fifo size is 512 fifo address is 1c8
  3868.  
  3869. [ 0.975357] <3>.(1)[1:swapper/0][MUSB]fifo_setup 1486: Tx ep 5 fifo is 512 fifo address is 2c8
  3870.  
  3871. [ 0.975387] <3>.(1)[1:swapper/0][MUSB]fifo_setup 1486: Tx ep 7 fifo size is 512 fifo address is 308
  3872.  
  3873. [ 0.975395] <3>.(1)[1:swapper/0][MUSB]fifo_setup 1496: Rx ep 7 fifo size is 512 fifo address is 348
  3874.  
  3875. [ 0.975403] <3>.(1)[1:swapper/0][MUSB]fifo_setup 1486: Tx ep 8 fifo size is 512 fifo address is 388
  3876.  
  3877. [ 0.975410] <3>.(1)[1:swapper/0][MUSB]fifo_setup 1496: Rx ep 8 fifo size is 512 fifo address is 3c8
  3878.  
  3879. [ 0.975417] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1814: ep_config_from_table 0
  3880.  
  3881. [ 0.975426] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1840: musb-hdrc: hw_ep 0shared, max 64
  3882.  
  3883. [ 0.975434] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1840: musb-hdrc: hw_ep 1tx, max 512
  3884.  
  3885. [ 0.975442] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1848: musb-hdrc: hw_ep 1rx, max 512
  3886.  
  3887. [ 0.975450] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1840: musb-hdrc: hw_ep 2tx, max 512
  3888.  
  3889. [ 0.975457] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1848: musb-hdrc: hw_ep 2rx, max 512
  3890.  
  3891. [ 0.975465] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1840: musb-hdrc: hw_ep 3tx, max 512
  3892.  
  3893. [ 0.975473] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1848: musb-hdrc: hw_ep 3rx, max 512
  3894.  
  3895. [ 0.975481] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1840: musb-hdrc: hw_ep 4tx, max 512
  3896.  
  3897. [ 0.975488] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1848: musb-hdrc: hw_ep 4rx, max 512
  3898.  
  3899. [ 0.975496] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1840: musb-hdrc: hw_ep 5tx, max 512
  3900.  
  3901. [ 0.975504] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1848: musb-hdrc: hw_ep 5rx, max 512
  3902.  
  3903. [ 0.975511] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1840: musb-hdrc: hw_ep 6tx, max 512
  3904.  
  3905. [ 0.975519] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1848: musb-hdrc: hw_ep 6rx, max 512
  3906.  
  3907. [ 0.975527] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1840: musb-hdrc: hw_ep 7tx, max 512
  3908.  
  3909. [ 0.975535] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1848: musb-hdrc: hw_ep 7rx, max 512
  3910.  
  3911. [ 0.975542] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1840: musb-hdrc: hw_ep 8tx, max 512
  3912.  
  3913. [ 0.975550] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1848: musb-hdrc: hw_ep 8rx, max 512
  3914.  
  3915. [ 0.975556] <3>.(1)[1:swapper/0][MUSB]musb_core_init 1853: musb_core_init end
  3916.  
  3917. [ 0.975603] <3>.(1)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 0 name is ep0
  3918.  
  3919. [ 0.975612] <3>.(1)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 1 name is ep1in
  3920.  
  3921. [ 0.975620] <3>.(1)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 1 name is ep1out
  3922.  
  3923. [ 0.975627] <3>.(1)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 2 name is ep2in
  3924.  
  3925. [ 0.975635] <3>.(1)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 2 name is ep2out
  3926.  
  3927. [ 0.975642] <3>.(1)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 3 name is ep3in
  3928.  
  3929. [ 0.975649] <3>.(1)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 3 name is ep3out
  3930.  
  3931. [ 0.975657] <3>.(1)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 4 name is ep4in
  3932.  
  3933. [ 0.975664] <3>.(1)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 4 name is ep4out
  3934.  
  3935. [ 0.975674] <3>.(1)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 5 name is ep5in
  3936.  
  3937. [ 0.975682] <3>.(1)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 5 name is ep5out
  3938.  
  3939. [ 0.975689] <3>.(1)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 6 name is ep6in
  3940.  
  3941. [ 0.975697] <3>.(1)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 6 name is ep6out
  3942.  
  3943. [ 0.975705] <3>.(1)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 7 name is ep7in
  3944.  
  3945. [ 0.975712] <3>.(1)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 7 name is ep7out
  3946.  
  3947. [ 0.975719] <3>.(1)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 8 name is ep8in
  3948.  
  3949. [ 0.975727] <3>.(1)[1:swapper/0][MUSB]init_peripheral_ep 2211: EP 8 name is ep8out
  3950.  
  3951. [ 0.975916] <3>.(1)[1:swapper/0][MUSB]mt_usb_disable 378: begin, <0,0>,<1,2,1,1>
  3952.  
  3953. [ 0.976015] <3>.(1)[1:swapper/0]musb core probe done base 0xffffff80111a0000
  3954.  
  3955. [ 0.976041] <3>.(1)[1:swapper/0]BOOTPROF: 976.034309:probe: probe=platform_drv_probe drv=musb-hdrc(ffffffc000e3fbf8) 31.11253401] <3>.(0)[1:swapper/0][CMDQ]REC 0xffffff801122a000 command buffer TRANSLATED:
  3956.  
  3957. [ 0.993412] <3>.(0)[1:swapper/0][CMDQ]Wait And Clear Event: CMDQ_EVENT_DISP_RDMA0_EOF
  3958.  
  3959. [ 0.993421] <3>.(0)[1:swapper/0][CMDQ]Wait And Clear Event: CMDQ_EVENT_MUTEX0_STREAM_EOF
  3960.  
  3961. [ 0.993428] <3>.(0)[1:swapper/0][CMDQ]Clear Event: CMDQ_EVENT_DISP_RDMA0_SOF
  3962.  
  3963. [ 0.993440] <3>.(0)[1:swapper/0][CMDQ]READ: Reg4, addr=0x1400c74c [COLOR], use_mask=0
  3964.  
  3965. [ 0.993446] <3>.(0)[1:swapper/0][CMDQ]======REC 0xffffff801122a000 command END
  3966.  
  3967. [ 0.993569] <3>.(0)[1:swapper/0][DISP]primary display START cmdq trigger loop finished
  3968.  
  3969. [ 0.994735] <3>.(2)[1:swapper/0]M4Uconfig_port:DISP_WDMA0,v1,s0
  3970.  
  3971. [ 1.063984] <2>.(2)[1:swapper/0][ION]ion_drv_create_heap: create heap: ion_fb_heap
  3972.  
  3973. [ 1.064945] <2>.(2)[1:swapper/0]BOOTPROF: 1064.937693:probe: probe=mtkfb_probe drv=mtkfb(ffffffc000e47ea0) 85.032770ms
  3974.  
  3975. [ 1.066644] <2>.(2)[1:swapper/0]BOOTPROF: 1066.637309:initcall: mtkfb_init 87.326001ms
  3976.  
  3977. [ 1.069220] <2>.(2)[1:swapper/0][MALI] Midgard r12p1-01alp0 DDK kernel device driver. GPU probe() begin.
  3978.  
  3979. [ 1.070453] <2>.(2)[1:swapper/0]mali 13040000.MALI: Continuing without Mali regulator control
  3980.  
  3981. [ 1.071517] <2>.(2)[1:swapper/0]mali 13040000.MALI: Continuing without Mali clock control
  3982.  
  3983. [ 1.072532] <2>.(2)[1:swapper/0][MALI] Alloc mtk_config
  3984.  
  3985. [ 1.074675] <2>.(2)[1:swapper/0]mali 13040000.MALI: GPU identified as 0x0720 r1p0 status 0
  3986.  
  3987. [ 1.077025] <3>.(3)[1:swapper/0]mali 13040000.MALI: Probed as mali0
  3988.  
  3989. [ 1.077809] <3>.(3)[1:swapper/0][MALI] Midgard r12p1-01alp0 DDK kernel device driver. GPU probe() end.
  3990.  
  3991. [ 1.088495] <3>.(3)[1:swapper/0][register_low_battery_notify] prio_val=5
  3992.  
  3993. [ 1.089335] <3>.(3)[1:swapper/0][register_battery_percent_notify] prio_val=5
  3994.  
  3995. [ 1.092159] <3>.(3)[1:swapper/0][ccci1/plat]MD ROM mem remap:[7a000000]->[0](817f7d7b:89878583)
  3996.  
  3997. [ 1.104839] <3>.(3)[1:swapper/0][CONN-MD-DFT][W]conn_md_add_user:uid (0x00000005) is added to user list successfully
  3998.  
  3999. [ 1.107293] <3>.(3)[1:swapper/0]BOOTPROF: 1107.284540:probe: probe=platform_drv_probe drv=cldma_modem(ffffffc000e56c28) 16.124924ms
  4000.  
  4001. [ 1.109507] <3>.(3)[1:swapper/0]BOOTPROF: 1109.499386:initcall: modem_cd_init 19.196307ms
  4002.  
  4003. [ 1.113352] <3>.(3)[1:swapper/0][WMT-DETECT][I]wmt_detect_driver_init:driver(major 154) installed success
  4004.  
  4005. [ 1.114587] <3>.(3)[1:swapper/0][SDIO-DETECT][I]sdio_detect_init:sdio_register_driver() ret=0
  4006.  
  4007. [ 1.116692] <3>.(3)[1:swapper/0]MTK-BTIF[I]mtk_btif_probe:DO BTIF PROBE
  4008.  
  4009. [ 1.117748] <3>.(3)[1:swapper/0]MTK-BTIF[I]mtk_btif_probe:DO BTIF PROBE
  4010.  
  4011. [ 1.118985] <3>.(3)[1:swapper/0]MTK-BTIF[I]BTIF_init:p_btif_buffer get memory 0xffffffc076c80000
  4012.  
  4013. [ 1.120081] <3>.(3)[1:swapper/0]MTK-BTIF[I]BTIF_init:p_tx_queue get memory 0xffffffc076c90000
  4014.  
  4015. [ 1.121143] <3>.(3)[1:swapper/0]MTK-BTIF[I]BTIF_init:p_rx_queue get memory 0xffffffc076ca0000
  4016.  
  4017. [ 1.122202] <3>.(3)[1:swapper/0]MTK-BTIF[I]hal_btif_info_get:_btif_tx_fifo_init succeed
  4018.  
  4019. [ 1.123392] <3>.(3)[1:swapper/0]MTK-BTIF[I]_btif_set_default_setting:get btif irq(122),register base(0xffffff80127ba000)
  4020.  
  4021. [ 1.124743] <3>.(3)[1:swapper/0]MTK-BTIF[I]_btif_set_default_setting:get interrupt flag(0x8)
  4022.  
  4023. [ 1.125792] <3>.(3)[1:swapper/0]MTK-BTIF[I]_btif_set_default_setting:get register phy base(0x1100c000)
  4024.  
  4025. [ 1.127031] <3>.(3)[1:swapper/0]MTK-BTIF-DMA[I]hal_dma_set_default_setting:get tx_dma irq(143),register base(0xffffff80127bc780)
  4026.  
  4027. [ 1.128494] <3>.(3)[1:swapper/0]MTK-BTIF-DMA[I]hal_dma_set_default_setting:get interrupt flag(0x8)
  4028.  
  4029. [ 1.129609] <3>.(3)[1:swapper/0]MTK-BTIF-DMA[I]hal_dma_set_default_setting:get register phy base dma_dir(1)(0x11000780)
  4030.  
  4031. [ 1.130955] MTK-BTIF[I]_btif_vfifo_init:alloc vFIFO for BTIF succeed in arch64,vir addr:0xffffffc000ccf420,
  4032.  
  4033. [ 1.132215] <3>.(3)[1:swapper/0]MTK-BTIF-DMA[I]hal_dma_set_default_setting:get rx_dma irq(144),register base(0xffffff80127be800)
  4034.  
  4035. [ 1.133667] <3>.(3)[1:swapper/0]MTK-BTIF-DMA[I]hal_dma_set_default_setting:get interrupt flag(0x8)
  4036.  
  4037. [ 1.134780] <3>.(3)[1:swapper/0]MTK-BTIF-DMA[I]hal_dma_set_default_setting:get register phy base dma_dir(0)(0x11000800)
  4038.  
  4039. [ 1.136121] MTK-BTIF[I]_btif_vfifo_init:alloc vFIFO for BTIF succeed in arch64,vir addr:0xffffffc000ccf420,
  4040.  
  4041. [ 1.137439] <3>.(3)[1:swapper/0]MTK-BTIF[I]_btif_rx_btm_init:btif_rxd start to work!
  4042.  
  4043. [ 1.138440] <3>.(3)[1:swapper/0]MTK-BTIF[I]_btif_rx_btm_init:rx_spin_lock init succeed
  4044.  
  4045. [ 1.139423] <3>.(3)[1:swapper/0]MTK-BTIF[I]_btif_tx_ctx_init:nothing is done when btif tx in user's thread
  4046.  
  4047. [ 1.140620] <3>.(3)[1:swapper/0]MTK-BTIF[I]_btif_tx_ctx_init:succeed
  4048.  
  4049. [ 1.141411] <3>.(3)[1:swapper/0]MTK-BTIF[I]btif_chrdev_init:devuce number allocation succeed
  4050.  
  4051. [ 1.142460] <3>.(3)[1:swapper/0]MTK-BTIF[I]btif_chrdev_init:add btif dev to kernel succeed
  4052.  
  4053. [ 1.143527] <3>.(3)[1:swapper/0]MTK-BTIF[I]btif_chrdev_init:create class for btif succeed
  4054.  
  4055. [ 1.144633] <3>.(3)[1:swapper/0]MTK-BTIF[I]btif_chrdev_init:create device for btif succeed
  4056.  
  4057. [ 1.145673] <3>.(3)[1:swapper/0]BOOTPROF: 1145.666386:initcall: BTIF_init 29.106847ms
  4058.  
  4059. [ 1.146740] <3>.(3)[1:swapper/0]=============================================================
  4060.  
  4061. [ 1.146740] <3>
  4062.  
  4063. [ 1.148015] <3>.(3)[1:swapper/0]~~~~~~~uTos version [BS.mt6755.D.2.2.1]~~~~~~~
  4064.  
  4065. [ 1.148930] <3>.(3)[1:swapper/0]=============================================================
  4066.  
  4067. [ 1.148930] <3>
  4068.  
  4069. [ 1.150572] <1>.(1)[1:swapper/0][cpu_ntf] <00>ffffffc000623310 (tz_driver_cpu_callback)
  4070.  
  4071. [ 1.153910] <1>.(1)[1:swapper/0][LAST PC] CORE_0 PC = 0xffffffc0000d0c00(enqueue_task_rt), FP = 0xffffffc00306b6d0, SP = 0xffffffc00306b6d0
  4072.  
  4073. [ 1.155484] <1>.(1)[1:swapper/0][LAST PC] CORE_1 PC = 0xffffffc000090a50(handle_IPI), FP = 0xffffffc003093d50, SP = 0xffffffc003093d50
  4074.  
  4075. [ 1.156991] <1>.(1)[1:swapper/0][LAST PC] CORE_2 PC = 0x0(), FP = 0x0, SP = 0x0
  4076.  
  4077. [ 1.157905] <1>.(1)[1:swapper/0][LAST PC] CORE_3 PC = 0x0(), FP = 0x0, SP = 0x0
  4078.  
  4079. [ 1.159127] <1>.(1)[1:swapper/0]systracker probe
  4080.  
  4081. [ 1.159721] <1>.(1)[1:swapper/0]of_iomap for systracker @ 0xffffff80127d4000
  4082.  
  4083. [ 1.160619] <1>.(1)[1:swapper/0]systracker_platform_probe_default:93: irq # 169
  4084.  
  4085. [ 1.162074] <1>.(1)[1:swapper/0]systracker init done
  4086.  
  4087. [ 1.174257] <1>.(1)[1:swapper/0][cmb_stub] thermal_ctrl_cb null
  4088.  
  4089. [ 1.180144] <1>.(1)[1:swapper/0][Hang_Detect] Initialize proc
  4090.  
  4091. [ 1.180860] <1>.(1)[1:swapper/0][Hang_Detect] create hang_detect thread
  4092.  
  4093. [ 1.181828] <0>.(0)[134:hang_detect][Hang_Detect] hang_detect thread starts.
  4094.  
  4095. [ 1.182027] <0>.(1)[1:swapper/0]atf_log: inited
  4096.  
  4097. [ 1.182030] <0>.(1)[1:swapper/0]ATF reserved memory: 0xbffc0000 - 0xbfffffff (0x40000)
  4098.  
  4099. [ 1.182057] <0>.(1)[1:swapper/0]atf_buf_phy_ctl: 0x3220963328
  4100.  
  4101. [ 1.182063] <0>.(1)[1:swapper/0]atf_buf_len: 262144
  4102.  
  4103. [ 1.182068] <0>.(1)[1:swapper/0]atf_buf_vir_ctl: ffffff80127de000
  4104.  
  4105. [ 1.182074] <0>.(1)[1:swapper/0]atf_log_vir_addr: ffffff8012800100
  4106.  
  4107. [ 1.182079] <0>.(1)[1:swapper/0]atf_log_len: 179968
  4108.  
  4109. [ 1.182423] <0>.(1)[1:swapper/0]atf irq num 281.
  4110.  
  4111. [ 1.182580] <0>.(1)[1:swapper/0][EMI MPU] Initialize EMI MPU.
  4112.  
  4113. [ 1.182779] <0>.(1)[1:swapper/0]get EMI_BASE_ADDR @ ffffff80127e0000
  4114.  
  4115. [ 1.182873] <0>.(1)[1:swapper/0][EMI MPU] EMI_MPUP = 0x2
  4116.  
  4117. [ 1.182879] <0>.(1)[1:swapper/0][EMI MPU] EMI_MPUQ = 0x0
  4118.  
  4119. [ 1.182885] <0>.(1)[1:swapper/0][EMI MPU] EMI_MPUR = 0x0
  4120.  
  4121. [ 1.182890] <0>.(1)[1:swapper/0][EMI MPU] EMI_MPUY = 0x0
  4122.  
  4123. [ 1.182896] <0>.(1)[1:swapper/0][EMI MPU] EMI_MPUP2 = 0x0
  4124.  
  4125. [ 1.182901] <0>.(1)[1:swapper/0][EMI MPU] EMI_MPUQ2 = 0x0
  4126.  
  4127. [ 1.182907] <0>.(1)[1:swapper/0][EMI MPU] EMI_MPUR2 = 0x0
  4128.  
  4129. [ 1.182912] <0>.(1)[1:swapper/0][EMI MPU] EMI_MPUY2 = 0x0
  4130.  
  4131. [ 1.182918] <0>.(1)[1:swapper/0][EMI MPU] EMI_MPUS = 0x20010100
  4132.  
  4133. [ 1.182923] <0>.(1)[1:swapper/0][EMI MPU] EMI_MPUT = 0x3003870
  4134.  
  4135. [ 1.182929] <0>.(1)[1:swapper/0][EMI MPU] EMI_WP_ADR = 0x0
  4136.  
  4137. [ 1.182935] <0>.(1)[1:swapper/0][EMI MPU] EMI_WP_CTRL = 0x0
  4138.  
  4139. [ 1.182940] <0>.(1)[1:swapper/0][EMI MPU] EMI_CHKER = 0x0
  4140.  
  4141. [ 1.182945] <0>.(1)[1:swapper/0][EMI MPU] EMI_CHKER_TYPE = 0x0
  4142.  
  4143. [ 1.182951] <0>.(1)[1:swapper/0][EMI MPU] EMI_CHKER_ADR = 0x0
  4144.  
  4145. [ 1.182960] <0>.(1)[1:swapper/0]EMI_DAPC Init start
  4146.  
  4147. [ 1.183032] <0>.(1)[1:swapper/0][DEVAPC] AO_ADDRESS ffffff80127e2000
  4148.  
  4149. [ 1.183129] <0>.(1)[1:swapper/0][DEVAPC] PD_ADDRESS ffffff80127e4000, IRD: 166
  4150.  
  4151. [ 1.183136] <0>.(1)[1:swapper/0]EMI_DAPC Init done
  4152.  
  4153. [ 1.183141] <0>.(1)[1:swapper/0][EMI MPU] Not 4G mode
  4154.  
  4155. [ 1.183892] <0>.(2)[1:swapper/0]get EMI_BASE_ADDR @ ffffff80127e6000
  4156.  
  4157. [ 1.185342] <0>.(2)[1:swapper/0][BTCVSD] Auddrv_BTCVSD_Address_Map:
  4158.  
  4159. [ 1.185349] <0>.(2)[1:swapper/0][BTCVSD] infra_misc_offset=0x700
  4160.  
  4161. [ 1.185355] <0>.(2)[1:swapper/0][BTCVSD] conn_bt_cvsd_mask=0x800
  4162.  
  4163. [ 1.185360] <0>.(2)[1:swapper/0][BTCVSD] read_off=0xfd0
  4164.  
  4165. [ 1.185365] <0>.(2)[1:swapper/0][BTCVSD] write_off=0xfd4
  4166.  
  4167. [ 1.185371] <0>.(2)[1:swapper/0][BTCVSD] packet_ind=0xfd8
  4168.  
  4169. [ 1.185376] <0>.(2)[1:swapper/0][BTCVSD] infra_base=0xffffff80127e8000
  4170.  
  4171. [ 1.185382] <0>.(2)[1:swapper/0][BTCVSD] btsys_pkv_physical_base=0xffffff8012840000
  4172.  
  4173. [ 1.185388] <0>.(2)[1:swapper/0][BTCVSD] btsys_sram_bank2_physical_base=0xffffff80127f0000
  4174.  
  4175. [ 1.185396] <0>.(2)[1:swapper/0]Disable_CVSD_Wakeup
  4176.  
  4177. [ 1.186926] <0>.(2)[1:swapper/0]mt-spi 1100a000.spi: spi.c: 1419: <mt_spi_probe>Controller at 0xffffff80127ea000 (irq 150)
  4178.  
  4179. [ 1.187040] <0>.(2)[1:swapper/0]mt-spi 1100a000.spi: master is unqueued, this is deprecated
  4180.  
  4181. [ 1.188073] <0>.(2)[1:swapper/0]spi spi0.1: spi.c: 1253: <mt_spi_setup>set up chip config,mode:1
  4182.  
  4183. [ 1.189388] <0>.(2)[1:swapper/0]tun: Universal TUN/TAP device driver, 1.6
  4184.  
  4185. [ 1.189394] <0>.(2)[1:swapper/0]tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  4186.  
  4187. [ 1.189488] <0>.(2)[1:swapper/0]PPP generic driver version 2.4.2
  4188.  
  4189. [ 1.189620] <0>.(2)[1:swapper/0]PPP BSD Compression module registered
  4190.  
  4191. [ 1.189634] <0>.(2)[1:swapper/0]PPP Deflate Compression module registered
  4192.  
  4193. [ 1.189665] <0>.(2)[1:swapper/0]PPP MPPE Compression module registered
  4194.  
  4195. [ 1.189805] <0>.(2)[1:swapper/0]usbcore: registered new interface driver usb-storage
  4196.  
  4197. [ 1.189854] <0>.(2)[1:swapper/0]usbcore: registered new interface driver ums-alauda
  4198.  
  4199. [ 1.189902] <0>.(2)[1:swapper/0]usbcore: registered new interface driver ums-cypress
  4200.  
  4201. [ 1.189950] <0>.(2)[1:swapper/0]usbcore: registered new interface driver ums-datafab
  4202.  
  4203. [ 1.189998] <0>.(2)[1:swapper/0]usbcore: registered new interface driver ums-freecom
  4204.  
  4205. [ 1.190050] <0>.(2)[1:swapper/0]usbcore: registered new interface driver ums-isd200
  4206.  
  4207. [ 1.190098] <0>.(2)[1:swapper/0]usbcore: registered new interface driver ums-jumpshot
  4208.  
  4209. [ 1.190146] <0>.(2)[1:swapper/0]usbcore: registered new interface driver ums-karma
  4210.  
  4211. [ 1.190200] <0>.(2)[1:swapper/0]usbcore: registered new interface driver ums-onetouch
  4212.  
  4213. [ 1.190248] <0>.(2)[1:swapper/0]usbcore: registered new interface driver ums-sddr09
  4214.  
  4215. [ 1.190297] <0>.(2)[1:swapper/0]usbcore: registered new interface driver ums-sddr55
  4216.  
  4217. [ 1.190346] <0>.(2)[1:swapper/0]usbcore: registered new interface driver ums-usbat
  4218.  
  4219. [ 1.190404] <0>.(2)[1:swapper/0]usbcore: registered new interface driver trancevibrator
  4220.  
  4221. [ 1.191653] <0>.(2)[1:swapper/0]kpd: Keypad probe start!!!
  4222.  
  4223. [ 1.191666] <0>.(2)[1:swapper/0]kpd: get kpd-clk fail, but not return, maybe kpd-clk is set by ccf.
  4224.  
  4225. [ 1.191727] <0>.(2)[1:swapper/0]kpd: kp base: 0xffffff80127ec000, addr:0xffffffc00116a108, kp irq: 196
  4226.  
  4227. [ 1.191770] <0>.(2)[1:swapper/0]kpd: key-debounce = 1024, sw-pwrkey = 116, hw-pwrkey = 8, hw-rstkey = 0, sw-rstkey = 0
  4228.  
  4229. [ 1.191779] <0>.(2)[1:swapper/0]kpd: init_keymap_state done: ffff ffff ffff ffff ff!
  4230.  
  4231. [ 1.191992] <0>.(2)[1:swapper/0]input: mtk-kpd as /devices/soc/10003000.keypad/input/input1
  4232.  
  4233. [ 1.192197] <0>.(2)[1:swapper/0]kpd: Normal Boot long press reboot selection
  4234.  
  4235. [ 1.192202] <0>.(2)[1:swapper/0]kpd: E/0][sd]of msdc DT probe msdc0!
  4236.  
  4237. [ 1.201114] <0>.(2)[1:swapper/0][sd]of_iomap for msdc @ 0xffffff8012a60000
  4238.  
  4239. [ 1.201146] <0>.(2)[1:swapper/0][sd]msdc get irq # 111
  4240.  
  4241. [ 1.201218] <0>.(2)[1:swapper/0][sd][MSDC0] hs200 ett setting for default is found in DT.
  4242.  
  4243. [ 1.201230] <0>.(2)[1:swapper/0][sd][MSDC0] hs400 ett setting for default is found in DT.
  4244.  
  4245. [ 1.201362] <0>.(2)[1:swapper/0][sd]of_iomap for gpio base @ 0xffffff80127ee000
  4246.  
  4247. [ 1.202022] <0>.(2)[1:swapper/0][sd]of_iomap for APMIXED base @ 0xffffff8012830000
  4248.  
  4249. [ 1.202110] <0>.(2)[1:swapper/0][sd]of_iomap for TOPCKGEN base @ 0xffffff8012832000
  4250.  
  4251. [ 1.248358] <0>.(2)[1:swapper/0][sd]MSDCPLL_PWR_CON0[0xffffff801283024c][bit0~1 should be 2b'01]=0x80000001
  4252.  
  4253. [ 1.248368] <0>.(2)[1:swapper/0][sd]MSDCPLL_CON0 [0xffffff8012830240][bit0 should be 1b'1]=0x101
  4254.  
  4255. [ 1.248375] <0>.(2)[1:swapper/0][sd]CLK_CFG_2 [0xffffff8012832060][bit[31:24]should be 0x01]=0x1818100
  4256.  
  4257. [ 1.248383] <0>.(2)[1:swapper/0][sd]CLK_CFG_3 [0xffffff8012832070][bit[15:0]should be 0x0202]=0x7020202
  4258.  
  4259. [ 1.248390] <0>.(2)[1:swapper/0][sd]PERI_PDN_STA0 [0xffffff80127fe018][bit13=msdc0, bit14=msdc1,0:on,1:off]=0x37dc5ffc
  4260.  
  4261. [ 1.248414] <0>.(2)[1:swapper/0]BOOTPROF: 1248.407002:probe: probe=platform_drv_probe drv=mtk-msdc(ffffffc000e7a828) 47.490846ms
  4262.  
  4263. [ 1.248584] <0>.(2)[1:swapper/0]mtk-msdc 11240000.msdc1: Got CD GPIO
  4264.  
  4265. [ 1.248629] <0>.(2)[1:swapper/0][sd]of msdc DT probe msdc1!
  4266.  
  4267. [ 1.248664] <0>.(2)[1:swapper/0][sd]of_iomap for msdc @ 0xffffff8012a80000
  4268.  
  4269. [ 1.248692] <0>.(2)[1:swapper/0][sd]msdc get irq # 112
  4270.  
  4271. [ 1.249351] <0>.(3)[114:kworker/u8:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<52> MSDC_INT_CMDTMO Arg<0x00000c00>
  4272.  
  4273. [ 1.253357] <0>.(3)[114:kworker/u8:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<52> MSDC_INT_CMDTMO Arg<0x80000c08>
  4274.  
  4275. [ 1.253876] <0>.(3)[114:kworker/u8:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<8> MSDC_INT_CMDTMO Arg<0x000001aa>
  4276.  
  4277. [ 1.254390] <0>.(3)[114:kworker/u8:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
  4278.  
  4279. [ 1.254905] <0>.(3)[114:kworker/u8:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
  4280.  
  4281. [ 1.255421] <0>.(3)[114:kworker/u8:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
  4282.  
  4283. [ 1.255939] <0>.(3)[114:kworker/u8:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<5> MSDC_INT_CMDTMO Arg<0x00000000>
  4284.  
  4285. [ 1.256452] <0>.(3)[114:kworker/u8:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
  4286.  
  4287. [ 1.256968] <0>.(3)[114:kworker/u8:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
  4288.  
  4289. [ 1.257488] <0>.(3)[114:kworker/u8:2][sd][msdc_command_resp_polling]: msdc0 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
  4290.  
  4291. [ 1.286290] <3>.(3)[134:hang_detect][sd][msdc_command_resp_polling]: msdc0 XXX CMD<55> MSDC_INT_CMDTMO Arg<0x00000000>
  4292.  
  4293. [ 1.286293] <3>.(3)[134:hang_detect][Hang_Detect] hang_detect disabled.
  4294.  
  4295. [ 1.291541] <1>.(1)[114:kworker/u8:2]mmc0: BKOPS_EN bit is not set
  4296.  
  4297. [ 1.296036] <1>.(1)[114:kworker/u8:2][sd]--- apply default emmc ett settings
  4298.  
  4299. [ 1.296911] <1>.(1)[114:kworker/u8:2][sd][MSDC, msdc_apply_ett_settings] hs200 ett, ett_count=12
  4300.  
  4301. [ 1.298004] <1>.(1)[114:kworker/u8:2][sd]msdc_apply_ett_settings:msdc0,reg[0xb0],offset[0x380],val[0x0],readback[0x403c000f]
  4302.  
  4303. [ 1.298610] <1>.(2)[1:swapper/0][sd]MSDCPLL_PWR_CON0[0xffffff801283024c][bit0~1 should be 2b'01]=0x80000001
  4304.  
  4305. [ 1.298618] <1>.(2)[1:swapper/0][sd]MSDCPLL_CON0 [0xffffff8012830240][bit0 should be 1b'1]=0x101
  4306.  
  4307. [ 1.298626] <1>.(2)[1:swapper/0][sd]CLK_CFG_2 [0xffffff8012832060][bit[31:24]should be 0x01]=0x1818100
  4308.  
  4309. [ 1.298633] <1>.(2)[1:swapper/0][sd]CLK_CFG_3 [0xffffff8012832070][bit[15:0]should be 0x0202]=0x7020202
  4310.  
  4311. [ 1.298640] <1>.(2)[1:swapper/0][sd]PERI_PDN_STA0 [0xffffff80127fe018][bit13=msdc0, bit14=msdc1,0:on,1:ofate /proc/msdc_debug
  4312.  
  4313. [ 1.300730] <1>.(2)[1:swapper/0][msdc_debug_proc_init]: successfully create /proc/msdc_help
  4314.  
  4315. [ 1.300746] <1>.(2)[1:swapper/0][msdc_debug_proc_init]: successfully create /proc/msdc_FT
  4316.  
  4317. [ 1.300762] <1>.(2)[1:swapper/0][msdc_debug_proc_init]: successfully create /proc/msdc_tune
  4318.  
  4319. [ 1.300779] <1>.(2)[1:swapper/0][msdc_debug_proc_init]: successfully create /proc/msdc_tune_flag
  4320.  
  4321. [ 1.300908] <1>.(2)[1:swapper/0]msdc @ 0xffffff8012a60000, id:0
  4322.  
  4323. [ 1.300915] <1>.(2)[1:swapper/0]msdc @ 0xffffff8012a80000, id:1
  4324.  
  4325. [ 1.301040] <1>.(2)[1:swapper/0]hidraw: raw HID events driver (C) Jiri Kosina
  4326.  
  4327. [ 1.302440] <1>.(2)[1:swapper/0]usbcore: registered new interface driver usbhid
  4328.  
  4329. [ 1.302446] <1>.(2)[1:swapper/0]usbhid: USB HID core driver
  4330.  
  4331. [ 1.303052] <1>.(2)[1:swapper/0]ashmem: initialized
  4332.  
  4333. [ 1.303971] <1>.(2)[1:swapper/0]usbcore: registered new interface driver snd-usb-audio
  4334.  
  4335. [ 1.305536] <1>.(2)[1:swapper/0]mtk_soc_offload_gdma_init
  4336.  
  4337. [ 1.306188] <1>.(2)[1:swapper/0]OffloadService_mod_init
  4338.  
  4339. [ 1.306536] <1>.(2)[1:swapper/0]mtk_soc_capture_platform_init
  4340.  
  4341. [ 1.306856] <1>.(2)[1:swapper/0]mtk_capture_probe
  4342.  
  4343. [ 1.306867] <1>.(2)[1:swapper/0]mtk_capture_probe: dev name mt-soc-ul1-pcm
  4344.  
  4345. [ 1.307508] <1>.(2)[1:swapper/0]mtk_soc_dl1_probe: dev name mt-soc-dl1-pcm
  4346.  
  4347. [ 1.307541] <1>.(2)[1:swapper/0][ge_mt_soc_pcm_dl1] afe_irq_number=176
  4348.  
  4349. [ 1.307576] <1>.(2)[1:swapper/0][ge_mt_soc_pcm_dl1] AFE_BASE_ADDRESS=0xffffff8012a5a000
  4350.  
  4351. [ 1.307583] <1>.(2)[1:swapper/0][ge_mt_soc_pcm_dl1] AFE_BASE_PHY=0x11220000
  4352.  
  4353. [ 1.307624] <1>.(2)[1:swapper/0]AudDrv_GPIO_probe
  4354.  
  4355. [ 1.307644] <1>.(2)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state default fail -19
  4356.  
  4357. [ 1.307651] <1>.(2)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state audpmicclk-mode0 fail -19
  4358.  
  4359. [ 1.307657] <1>.(2)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state audpmicclk-mode1 fail -19
  4360.  
  4361. [ 1.307664] <1>.(2)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state audi2s1-mode0 fail -19
  4362.  
  4363. [ 1.307670] <1>.(2)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state audi2s1-mode1 fail -19
  4364.  
  4365. [ 1.307676] <1>.(2)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state extamp-pullhigh fail -19
  4366.  
  4367. [ 1.307683] <1>.(2)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state extamp-pulllow fail -19
  4368.  
  4369. [ 1.307689] <1>.(2)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state extamp2-pullhigh fail -19
  4370.  
  4371. [ 1.307695] <1>.(2)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state extamp2-pulllow fail -19
  4372.  
  4373. [ 1.307701] <1>.(2)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state rcvspk-pullhigh fail -19
  4374.  
  4375. [ 1.307708] <1>.(2)[1:swapper/0]AudDrv_GPIO_probe pinctrl_lookup_state rcvspk-pulllow fail -19
  4376.  
  4377. [ 1.307855] <1>.(2)[1:swapper/0]Auddrv_Read_Efuse_HPOffset(+)
  4378.  
  4379. [ 1.307917] <1>.(2)[1:swapper/0]Auddrv_Read_Efuse_HPOffset polling 0xC1A=0x0
  4380.  
  4381. [ 1.308930] <1>.(2)[1:swapper/0]HPoffset : efuse[0]=0x0
  4382.  
  4383. [ 1.308964] <1>.(2)[1:swapper/0]Auddrv_Read_Efuse_HPOffset polling 0xC1A=0x0
  4384.  
  4385. [ 1.309976] <1>.(2)[1:swapper/0]HPoffset : efuse[1]=0x0
  4386.  
  4387. [ 1.310044] <1>.(2)[1:swapper/0]Auddrv_Read_Efuse_HPOffset polling 0xC1A=0x0
  4388.  
  4389. [ 1.311056] <1>.(2)[1:swapper/0]HPoffset : efuse[2]=0xa080
  4390.  
  4391. [ 1.311080] <1>.(2)[1:swapper/0]RG_AUDHPLTRIM_VAUDP15 = 0
  4392.  
  4393. [ 1.311085] <1>.(2)[1:swapper/0]RG_AUDHPRTRIM_VAUDP15 = 0
  4394.  
  4395. [ 1.311091] <1>.(2)[1:swapper/0]RG_AUDHPLFINETRIM_VAUDP15 = 0
  4396.  
  4397. [ 1.311096] <1>.(2)[1:swapper/0]RG_AUDHPRFINETRIM_VAUDP15 = 0
  4398.  
  4399. [ 1.311101] <1>.(2)[1:swapper/0]RG_AUDHPLTRIM_VAUDP15_SPKHP = 0
  4400.  
  4401. [ 1.311106] <1>.(2)[1:swapper/0]RG_AUDHPRTRIM_VAUDP15_SPKHP = 0
  4402.  
  4403. [ 1.311111] <1>.(2)[1:swapper/0]RG_AUDHPLFINETRIM_VAUDP15_SPKHP = 0
  4404.  
  4405. [ 1.311117] <1>.(2)[1:swapper/0]RG_AUDHPRFINETRIM_VAUDP15_SPKHP = 0
  4406.  
  4407. [ 1.311122] <1>.(2)[1:swapper/0]Auddrv_Read_Efuse_HPOffset(-)
  4408.  
  4409. [ 1.311572] <1>.(2)[1:swapper/0]mtk_soc_dummy_platform_init
  4410.  
  4411. [ 1.312057] <1>.(2)[1:swapper/0]mtk_dummy_probe
  4412.  
  4413. [ 1.312068] <1>.(2)[1:swapper/0]mtk_dummy_pmt-soc-i2s0dl1-pcm
  4414.  
  4415. [ 1.318407] <1>.(2)[1:swapper/0]mtk_soc_i2s0_awb_platform_init
  4416.  
  4417. [ 1.318808] <1>.(2)[1:swapper/0]mtk_i2s0_awb_probe
  4418.  
  4419. [ 1.318818] <1>.(2)[1:swapper/0]mtk_i2s0_awb_probe: dev name mt-soc-i2s0awb-pcm
  4420.  
  4421. [ 1.319114] <1>.(2)[1:swapper/0]mtk_soc_uldlloopback_platform_init
  4422.  
  4423. [ 1.319457] <1>.(2)[1:swapper/0]mtk_uldlloopback_probe
  4424.  
  4425. [ 1.319468] <1>.(2)[1:swapper/0]mtk_uldlloopback_probe: dev name mt-soc-uldlloopback-pcm
  4426.  
  4427. [ 1.320193] <1>.(2)[1:swapper/0]mtk_soc_dl2_probe: dev name mt-soc-dl2-pcm
  4428.  
  4429. [ 1.320459] <1>.(2)[1:swapper/0]mtk_mrgrx_soc_platform_init
  4430.  
  4431. [ 1.320798] <1>.(2)[1:swapper/0]mtk_mrgrx_probe
  4432.  
  4433. [ 1.320807] <1>.(2)[1:swapper/0]mtk_mrgrx_probe: dev name mt-soc-mrgrx-pcm
  4434.  
  4435. [ 1.321126] <1>.(2)[1:swapper/0]mtk_soc_mrgrx_awb_platform_init
  4436.  
  4437. [ 1.321465] <1>.(2)[1:swapper/0]mtk_mrgrx_awb_probe
  4438.  
  4439. [ 1.321475] <1>.(2)[1:swapper/0]mtk_mrgrx_awb_probe: dev name mt-soc-mrgrx-awb-pcm
  4440.  
  4441. [ 1.321785] <1>.(2)[1:swapper/0]mtk_fm_i2s_soc_platform_init
  4442.  
  4443. [ 1.322124] <1>.(2)[1:swapper/0]mtk_fm_i2s_probe
  4444.  
  4445. [ 1.322133] <1>.(2)[1:swapper/0]mtk_fm_i2s_probe: dev name mt-soc-fm-i2s-pcm
  4446.  
  4447. [ 1.322441] <1>.(2)[1:swapper/0]mtk_soc_fm_i2s_awb_platform_init
  4448.  
  4449. [ 1.322783] <1>.(2)[1:swapper/0]mtk_fm_i2s_awb_probe
  4450.  
  4451. [ 1.322792] <1>.(2)[1:swapper/0]mtk_fm_i2s_awb_probe: dev name mt-soc-fm-i2s-awb-pcm
  4452.  
  4453. [ 1.323101] <1>.(2)[1:swapper/0]mtk_soc_dl1_awb_platform_init
  4454.  
  4455. [ 1.323442] <1>.(2)[1:swapper/0]mtk_dl1_awb_probe
  4456.  
  4457. [ 1.323451] <1>.(2)[1:swapper/0]mtk_dl1_awb_probe: dev name mt-soc-dl1-awb-pcm
  4458.  
  4459. [ 1.324388] <1>.(2)[1:swapper/0]mtk_soc_bt_dai_platform_init
  4460.  
  4461. [ 1.324745] <1>.(2)[1:swapper/0]mtk_bt_dai_probe
  4462.  
  4463. [ 1.324754] <1>.(2)[1:swapper/0]mtk_bt_dai_probe: dev name mt-soc-voip-bt-in
  4464.  
  4465. [ 1.325043] <1>.(2)[1:swapper/0]mtk_dai_stub_init:
  4466.  
  4467. [ 1.325422] <1>.(2)[1:swapper/0]mtk_dai_stub_dev_probe name bus:mt_soc_dai_name@11220000
  4468.  
  4469. [ 1.325431] <1>.(2)[1:swapper/0]mtk_dai_stub_dev_probe: dev name mt-soc-dai-driver
  4470.  
  4471. [ 1.325506] <1>.(2)[1:swapper/0]mtk_dai_stub_dev_probe: rc = 0
  4472.  
  4473. [ 1.325764] <1>.(2)[1:swapper/0]mtk_routing_init:
  4474.  
  4475. [ 1.326149] <1>.(2)[1:swapper/0]mtk_routing_dev_probe name bus:mt_soc_routing_dai_name@11220000
  4476.  
  4477. [ 1.326159] <1>.(2)[1:swapper/0]mtk_routing_dev_probe: dev name Routing-Control
  4478.  
  4479. [ 1.326425] <1>.(2)[1:swapper/0]mtk_dummy_codec_init:
  4480.  
  4481. [ 1.326809] <1>.(2)[1:swapper/0]mtk_dummy_codec_dev_probe: dev name mt-soc-dummy-codec
  4482.  
  4483. [ 1.327133] <1>.(2)[1:swapper/0]mtk_mt6331_codec_init:
  4484.  
  4485. [ 1.327516] <1>.(2)[1:swapper/0]mtk_mt6331_codec_dev_probe: dev name mt-soc-codec
  4486.  
  4487. [ 1.330220] <1>.(2)[1:swapper/0]soc-audio soc-audio: ASoC: machine mt-snd-card should use snd_soc_register_card()
  4488.  
  4489. [ 1.331051] <1>.(2)[1:swapper/0]mt6331_codec_probe()
  4490.  
  4491. [ 1.331076] <1>.(2)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: no source widget found for SPEAKER PGA
  4492.  
  4493. [ 1.331087] <1>.(2)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to add route SPEAKER PGA -> Voice Mux -> VOICE_Mux_E
  4494.  
  4495. [ 1.331363] <1>.(2)[1:swapper/0]mt6331_codec_init_reg
  4496.  
  4497. [ 1.331456] <1>.(2)[1:swapper/0]InitCodecDefault
  4498.  
  4499. [ 1.331472] <1>.(2)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: no source widget found for SPEAKER PGA
  4500.  
  4501. [ 1.331481] <1>.(2)[1:swapper/0]mt-soc-codec mt-soc-codec: ASoC: Failed to add route SPEAKER PGA -> Voice Mux -> VOICE_Mux_E
  4502.  
  4503. [ 1.331680] <1>.(2)[1:swapper/0]mtk_afe_capture_probe
  4504.  
  4505. [ 1.331755] <1>.(2)[1:swapper/0]mtk_voice_platform_probe
  4506.  
  4507. [ 1.331977] <1>.(2)[1:swapper/0]dummy_codec_probe()
  4508.  
  4509. [ 1.332165] <1>.(2)[1:swapper/0]mtk_afe_uldlloopback_probe
  4510.  
  4511. [ 1.332212] <1>.(2)[1:swapper/0]mtk_afe_i2s0_probe
  4512.  
  4513. [ 1.332277] <1>.(2)[1:swapper/0]mtk_afe_mrgrx_probe
  4514.  
  4515. [ 1.332340] <1>.(2)[1:swapper/0]mtk_afe_mrgrx_awb_probe
  4516.  
  4517. [ 1.332452] <1>.(2)[1:swapper/0]mtk_afe_I2S0dl1_probe
  4518.  
  4519. [ 1.332513] <1>.(2)[1:swapper/0]mtk_afe_dl1_awb_probe
  4520.  
  4521. [ 1.332560] <1>.(2)[1:swapper/0]mtk_voice_bt_platform_probe
  4522.  
  4523. [ 1.332640] <1>.(2)[1:swapperiver mapping ok
  4524.  
  4525. [ 1.334993] <1>.(2)[1:swapper/0]mtk_asoc_pcm_mrgrx_new
  4526.  
  4527. [ 1.335002] <1>.(2)[1:swapper/0]soc-audio soc-audio: mt-soc-mrgrx-dai-codec <-> mt-soc-mrgrxdai-driver mapping ok
  4528.  
  4529. [ 1.335179] <1>.(2)[1:swapper/0]mtk_asoc_mrgrx_awb_pcm_new
  4530.  
  4531. [ 1.335189] <1>.(2)[1:swapper/0]soc-audio soc-audio: mt-soc-mrgrx-dummy-dai-codec <-> mt-soc-mrgrxdai-driver mapping ok
  4532.  
  4533. [ 1.335302] <1>.(2)[1:swapper/0]mtk_asoc_pcm_I2S0dl1_new
  4534.  
  4535. [ 1.335312] <1>.(2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-I2s0tx-dai <-> mt-soc-i2s0dl1dai-driver mapping ok
  4536.  
  4537. [ 1.335422] <1>.(2)[1:swapper/0]mtk_asoc_dl1_awb_pcm_new
  4538.  
  4539. [ 1.335432] <1>.(2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-dl1awb-dai <-> mt-soc-dl1awbdai-driver mapping ok
  4540.  
  4541. [ 1.335547] <1>.(2)[1:swapper/0]mtk_soc_voice_bt_new
  4542.  
  4543. [ 1.335557] <1>.(2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-voicemd1-bt-dai <-> mt-soc-voicemd1-btdai-driver mapping ok
  4544.  
  4545. [ 1.335672] <1>.(2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-voipcall-btout-dai <-> mt-soc-voipcall-btdai-out-driver mapping ok
  4546.  
  4547. [ 1.335783] <1>.(2)[1:swapper/0]mtk_asoc_bt_dai_pcm_new
  4548.  
  4549. [ 1.335793] <1>.(2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-voipcall-btin-dai <-> mt-soc-voipcall-btdai-in-driver mapping ok
  4550.  
  4551. [ 1.335915] <1>.(2)[1:swapper/0]soc-audio soc-audio: mt-soc-tdmrx-dai-codec <-> mt-soc-tdmrxdai-driver mapping ok
  4552.  
  4553. [ 1.336033] <1>.(2)[1:swapper/0]soc-audio soc-audio: mt-soc-fmmrg2tx-dummy-dai-codec <-> mt-soc-fmmrgtxdai-driver mapping ok
  4554.  
  4555. [ 1.336144] <1>.(2)[1:swapper/0]mtk_asoc_capture2_pcm_new
  4556.  
  4557. [ 1.336154] <1>.(2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-rx-dai2 <-> mt-soc-ul2dai-driver mapping ok
  4558.  
  4559. [ 1.336263] <1>.(2)[1:swapper/0]mtk_asoc_i2s0_awb_pcm_new
  4560.  
  4561. [ 1.336273] <1>.(2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-i2s0awb-dai <-> mt-soc-i2s0awbdai-driver mapping ok
  4562.  
  4563. [ 1.336442] <1>.(2)[1:swapper/0]mtk_soc_voice_md2_new
  4564.  
  4565. [ 1.336452] <1>.(2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-voicemd2-dai <-> mt-soc-voicemd2dai-driver mapping ok
  4566.  
  4567. [ 1.336569] <1>.(2)[1:swapper/0]mtk_asoc_routing_pcm_new
  4568.  
  4569. [ 1.336579] <1>.(2)[1:swapper/0]soc-audio soc-audio: mt-soc-dummy-dai-codec <-> Routing-Control mapping ok
  4570.  
  4571. [ 1.336700] <1>.(2)[1:swapper/0]mtk_soc_voice_md2_bt_new
  4572.  
  4573. [ 1.336709] <1>.(2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-voicemd2-bt-dai <-> mt-soc-voicemd2-btdai-driver mapping ok
  4574.  
  4575. [ 1.336821] <1>.(2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-hp-impedance-dai <-> mt-soc-hpimpedancedai-driver mapping ok
  4576.  
  4577. [ 1.336935] <1>.(2)[1:swapper/0]mtk_asoc_pcm_fm_i2s_new
  4578.  
  4579. [ 1.336944] <1>.(2)[1:swapper/0]soc-audio soc-audio: mt-soc-fm-i2s-dai-codec <-> mt-soc-fmi2S-driver mapping ok
  4580.  
  4581. [ 1.337078] <1>.(2)[1:swapper/0]mtk_asoc_fm_i2s_awb_pcm_new
  4582.  
  4583. [ 1.337088] <1>.(2)[1:swapper/0]soc-audio soc-audio: mt-soc-fm-i2s-dummy-dai-codec <-> mt-soc-fmi2S-driver mapping ok
  4584.  
  4585. [ 1.337142] <1>.(2)[1:swapper/0]compress asoc: mt-soc-offload-gdma-dai-codec <-> mt-soc-offload-gdma-driver mapping ok
  4586.  
  4587. [ 1.337263] <1>.(2)[1:swapper/0]soc-audio soc-audio: mt-soc-codec-tx-dai2 <-> mt-soc-dl2dai-driver mapping ok
  4588.  
  4589. [ 1.337555] <1>.(2)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create Voice_MD1_PLayback debugfs file
  4590.  
  4591. [ 1.337580] <1>.(2)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create Voice_MD2_PLayback debugfs file
  4592.  
  4593. [ 1.337691] <1>.(2)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create MultiMedia_Routing debugfs file
  4594.  
  4595. [ 1.337705] <1>.(2)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create MultiMedia_Routing debugfs file
  4596.  
  4597. [ 1.337728] <1>.(2)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create HMDI_PLayback debugfs file
  4598.  
  4599. [ 1.337759] <1>.(2)[1:swapper/0]mt-soc-dummy-codec mt-soc-dummy-codec: ASoC: Failed to create I2S0_PLayback debugfs file
  4600.  
  4601. [ 1.337783] <1>.(2)[1:swapper/0]mt-soc-dummy-codeciled to create ULDL_Loopback debugfs file
  4602.  
  4603. [ 1.338479] <1>.(2)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create I2S0_PLayback debugfs file
  4604.  
  4605. [ 1.338528] <1>.(2)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create MRGRX_PLayback debugfs file
  4606.  
  4607. [ 1.338552] <1>.(2)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create MRGRX_CAPTURE debugfs file
  4608.  
  4609. [ 1.338648] <1>.(2)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create FM_I2S_Playback debugfs file
  4610.  
  4611. [ 1.338672] <1>.(2)[1:swapper/0]mt-soc-dai-driver mt-soc-dai-driver: ASoC: Failed to create FM_I2S_Capture debugfs file
  4612.  
  4613. [ 1.344954] <1>.(2)[1:swapper/0]Mirror/redirect action on
  4614.  
  4615. [ 1.345006] <1>.(2)[1:swapper/0]u32 classifier
  4616.  
  4617. [ 1.345011] <1>.(2)[1:swapper/0] Performance counters on
  4618.  
  4619. [ 1.345016] <1>.(2)[1:swapper/0] input device check on
  4620.  
  4621. [ 1.345021] <1>.(2)[1:swapper/0] Actions configured
  4622.  
  4623. [ 1.345057] <1>.(2)[1:swapper/0]Netfilter messages via NETLINK v0.30.
  4624.  
  4625. [ 1.345145] <1>.(2)[1:swapper/0]nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  4626.  
  4627. [ 1.345678] <1>.(2)[1:swapper/0]ctnetlink v0.93: registering with nfnetlink.
  4628.  
  4629. [ 1.346328] <1>.(2)[1:swapper/0]xt_time: kernel timezone is -0000
  4630.  
  4631. [ 1.346494] <1>.(2)[1:swapper/0]ipip: IPv4 over IPv4 tunneling driver
  4632.  
  4633. [ 1.347333] <1>.(2)[1:swapper/0]ip_tables: (C) 2000-2006 Netfilter Core Team
  4634.  
  4635. [ 1.347545] <1>.(2)[1:swapper/0]arp_tables: (C) 2002 David S. Miller
  4636.  
  4637. [ 1.347579] <1>.(2)[1:swapper/0]TCP: cubic registered
  4638.  
  4639. [ 1.347593] <1>.(2)[1:swapper/0]Initializing XFRM netlink socket
  4640.  
  4641. [ 1.351942] <1>.(0)[1:swapper/0]mip6: Mobile IPv6
  4642.  
  4643. [ 1.351994] <1>.(0)[1:swapper/0]ip6_tables: (C) 2000-2006 Netfilter Core Team
  4644.  
  4645. [ 1.352263] <1>.(0)[1:swapper/0]sit: IPv6 over IPv4 tunneling driver
  4646.  
  4647. [ 1.353727] <1>.(0)[1:swapper/0]bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  4648.  
  4649. [ 1.353764] <1>.(0)[1:swapper/0]Bridge firewalling registered
  4650.  
  4651. [ 1.353780] <1>.(0)[1:swapper/0]8021q: 802.1Q VLAN Support v1.8
  4652.  
  4653. [ 1.354316] <1>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc000084fe8 (fpsimd_cpu_hotplug_notifier)
  4654.  
  4655. [ 1.354481] <1>.(0)[1:swapper/0]Registered cp15_barrier emulation handler
  4656.  
  4657. [ 1.355254] <1>.(0)[1:swapper/0]Registered setend emulation handler
  4658.  
  4659. [ 1.355266] <1>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc0000946e8 (insn_cpu_hotplug_notify)
  4660.  
  4661. [ 1.355695] <1>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc0000e1c50 (console_cpu_notify)
  4662.  
  4663. [ 1.356837] <1>.(2)[1:swapper/0][Power/dcm] [dcm_set_default]type:0x000000cb
  4664.  
  4665. [ 1.356848] <1>.(2)[1:swapper/0][Power/dcm] [ ARMCORE_DCM 0x00000001] current state:1 (0)
  4666.  
  4667. [ 1.356862] <1>.(2)[1:swapper/0][Power/dcm] [ MCUSYS_DCM 0x00000002] current state:1 (0)
  4668.  
  4669. [ 1.356871] <1>.(2)[1:swapper/0][Power/dcm] [ PERI_DCM 0x00000008] current state:1 (0)
  4670.  
  4671. [ 1.356883] <1>.(2)[1:swapper/0][Power/dcm] [ TOPCKG_DCM 0x00000040] current state:1 (0)
  4672.  
  4673. [ 1.356891] <1>.(2)[1:swapper/0][Power/dcm] [ EFUSE_DCM 0x00000080] current state:1 (0)
  4674.  
  4675. [ 1.356897] <1>.(2)[1:swapper/0][Power/dcm]
  4676.  
  4677. [ 1.356897] <1>******** dcm dump register *********
  4678.  
  4679. [ 1.356905] <1>.(2)[1:swapper/0][Power/dcm] APMIXED_PLL_CON2 (0xffffff8012b3c008): 0x0000020e
  4680.  
  4681. [ 1.356913] <1>.(2)[1:swapper/0][Power/dcm] MCUCFG_ACLKEN_DIV (0xffffff8012a9c640): 0x00000012
  4682.  
  4683. [ 1.356920] <1>.(2)[1:swapper/0][Power/dcm] MCUCFG_L2C_SRAM_CTRL (0xffffff8012a9c648): 0x00200081
  4684.  
  4685. [ 1.356927] <1>.(2)[1:swapper/0][Power/dcm] MCUCFG_CCI_CLK_CTRL (0xffffff8012a9c660): 0x00000117
  4686.  
  4687. [ 1.356935] <1>.(2)[1:swapper/0][Power/dcm] MCUCFG_BUS_FABRIC_DCM_CTRL (0xffffff8012a9c668): 0x00000303
  4688.  
  4689. [ 1.356942] <1>.(2)[1:swapper/0][Power/dcm] TOP_CKMUXSEL (0xffffff8012abc000): 0x00000005
  4690.  
  4691. [ 1.356949] <1>.(2)[1:swapper/0][Power/dcm] TOP_CKDIV1 357063] <1>.(2)[1:swapper/0][Power/dcm] EFUSE_REG_DCM_ON (0xffffff8012b3a55c): 0x00000001
  4692.  
  4693. [ 1.357196] <1>.(2)[1:swapper/0][Power/clkmgr] [00][CG_INFRA]=[0x00000088]
  4694.  
  4695. [ 1.357204] <1>.(2)[1:swapper/0][Power/clkmgr] [01][CG_PERI ]=[0x37dc1ffc]
  4696.  
  4697. [ 1.357211] <1>.(2)[1:swapper/0][Power/clkmgr] [02][CG_DISP0]=[0xfffcb3fc][0xfff833fc]
  4698.  
  4699. [ 1.357219] <1>.(2)[1:swapper/0][Power/clkmgr] [03][CG_DISP1]=[0xfffffff0][0xfffffff0]
  4700.  
  4701. [ 1.357226] <1>.(2)[1:swapper/0][Power/clkmgr] [04][CG_IMAGE]=[0x00000000]
  4702.  
  4703. [ 1.357233] <1>.(2)[1:swapper/0][Power/clkmgr] [05][CG_MFG ]=[0x00000000]
  4704.  
  4705. [ 1.357240] <1>.(2)[1:swapper/0][Power/clkmgr] [06][CG_AUDIO]=[0x0f0c4344]
  4706.  
  4707. [ 1.357247] <1>.(2)[1:swapper/0][Power/clkmgr] [07][CG_VDEC0]=[0x00000000][0x00000000]
  4708.  
  4709. [ 1.357255] <1>.(2)[1:swapper/0][Power/clkmgr] [08][CG_VDEC1]=[0x00000000][0x00000000]
  4710.  
  4711. [ 1.358066] <1>.(2)[1:swapper/0][Power/cpufreq] @_mt_cpufreq_init: num_possible_cpus: 4
  4712.  
  4713. [ 1.358077] <1>.(2)[1:swapper/0][Power/cpufreq] CPU clock-frequency from DT = 1000 MHz
  4714.  
  4715. [ 1.358083] <1>.(2)[1:swapper/0][Power/cpufreq] @_mt_cpufreq_get_cpu_level: efuse cpu_spd_bond = 0x6
  4716.  
  4717. [ 1.358089] <1>.(2)[1:swapper/0][Power/cpufreq] @_mt_cpufreq_get_cpu_level: segment_code = 0x12
  4718.  
  4719. [ 1.358174] <1>.(2)[1:swapper/0][Power/cpufreq] [0] = { .cpufreq_khz = 988000, .cpufreq_ncpu = 4, .cpufreq_power = 1058 }
  4720.  
  4721. [ 1.358182] <1>.(2)[1:swapper/0][Power/cpufreq] [1] = { .cpufreq_khz = 923000, .cpufreq_ncpu = 4, .cpufreq_power = 938 }
  4722.  
  4723. [ 1.358189] <1>.(2)[1:swapper/0][Power/cpufreq] [2] = { .cpufreq_khz = 858000, .cpufreq_ncpu = 4, .cpufreq_power = 827 }
  4724.  
  4725. [ 1.358197] <1>.(2)[1:swapper/0][Power/cpufreq] [3] = { .cpufreq_khz = 988000, .cpufreq_ncpu = 3, .cpufreq_power = 793 }
  4726.  
  4727. [ 1.358204] <1>.(2)[1:swapper/0][Power/cpufreq] [4] = { .cpufreq_khz = 793000, .cpufreq_ncpu = 4, .cpufreq_power = 717 }
  4728.  
  4729. [ 1.358211] <1>.(2)[1:swapper/0][Power/cpufreq] [5] = { .cpufreq_khz = 923000, .cpufreq_ncpu = 3, .cpufreq_power = 703 }
  4730.  
  4731. [ 1.358218] <1>.(2)[1:swapper/0][Power/cpufreq] [6] = { .cpufreq_khz = 858000, .cpufreq_ncpu = 3, .cpufreq_power = 620 }
  4732.  
  4733. [ 1.358225] <1>.(2)[1:swapper/0][Power/cpufreq] [7] = { .cpufreq_khz = 793000, .cpufreq_ncpu = 3, .cpufreq_power = 537 }
  4734.  
  4735. [ 1.358233] <1>.(2)[1:swapper/0][Power/cpufreq] [8] = { .cpufreq_khz = 637000, .cpufreq_ncpu = 4, .cpufreq_power = 530 }
  4736.  
  4737. [ 1.358240] <1>.(2)[1:swapper/0][Power/cpufreq] [9] = { .cpufreq_khz = 988000, .cpufreq_ncpu = 2, .cpufreq_power = 529 }
  4738.  
  4739. [ 1.358247] <1>.(2)[1:swapper/0][Power/cpufreq] [10] = { .cpufreq_khz = 923000, .cpufreq_ncpu = 2, .cpufreq_power = 469 }
  4740.  
  4741. [ 1.358254] <1>.(2)[1:swapper/0][Power/cpufreq] [11] = { .cpufreq_khz = 858000, .cpufreq_ncpu = 2, .cpufreq_power = 413 }
  4742.  
  4743. [ 1.358262] <1>.(2)[1:swapper/0][Power/cpufreq] [12] = { .cpufreq_khz = 637000, .cpufreq_ncpu = 3, .cpufreq_power = 397 }
  4744.  
  4745. [ 1.358269] <1>.(2)[1:swapper/0][Power/cpufreq] [13] = { .cpufreq_khz = 494000, .cpufreq_ncpu = 4, .cpufreq_power = 379 }
  4746.  
  4747. [ 1.358276] <1>.(2)[1:swapper/0][Power/cpufreq] [14] = { .cpufreq_khz = 793000, .cpufreq_ncpu = 2, .cpufreq_power = 358 }
  4748.  
  4749. [ 1.358284] <1>.(2)[1:swapper/0][Power/cpufreq] [15] = { .cpufreq_khz = 494000, .cpufreq_ncpu = 3, .cpufreq_power = 284 }
  4750.  
  4751. [ 1.358291] <1>.(2)[1:swapper/0][Power/cpufreq] [16] = { .cpufreq_khz = 637000, .cpufreq_ncpu = 2, .cpufreq_power = 265 }
  4752.  
  4753. [ 1.358343] <1>.(2)[1:swapper/0][Power/cpufreq] [17] = { .cpufreq_khz = 988000, .cpufreq_ncpu = 1, .cpufreq_power = 264 }
  4754.  
  4755. [ 1.358351] <1>.(2)[1:swapper/0][Power/cpufreq] [18] = { .cpufreq_khz = 364000, .cpufreq_ncpu = 4, .cpufreq_power = 259 }
  4756.  
  4757. [ 1.358358] <1>.(2)[1:swapper/0][Power/cpufreq] [19] = { .cpufreq_khz = 923000, .cpufreq_ncpu = 1, .cpufreq_power = 234 }
  4758.  
  4759. [ 1.358365] <1>.(2)[1:swapper/0][Power/cpufreq] [20] = { .cpufreq_khz = 858000, .cpufreq_ncpu = 1, .cpufreq_power = 206 }
  4760.  
  4761. [ 1.358372] <1>.(2)[1:swapper/0][Power/cpufreq] [21] = { .cpufreq_khz = 36400ne!
  4762.  
  4763. [ 1.358815] <1>.(2)[1:swapper/0][cpu_ntf] <00>ffffffc00071cd84 (cpufreq_cpu_callback)
  4764.  
  4765. [ 1.358832] <1>.(2)[1:swapper/0][cpu_ntf] <00>ffffffc000338c64 (_mt_cpufreq_cpu_CB)
  4766.  
  4767. [ 1.358838] <1>.(2)[1:swapper/0][Power/cpufreq] CPU DVFS driver probe done
  4768.  
  4769. [ 1.358888] <1>.(2)[1:swapper/0][Power/cpufreq] CPU DVFS pdrv init done.
  4770.  
  4771. [ 1.359191] <1>.(2)[1:swapper/0][PTP] val[0]=0x11cc7fcf
  4772.  
  4773. [ 1.359197] <1>.(2)[1:swapper/0][PTP] val[1]=0x5f0000
  4774.  
  4775. [ 1.359202] <1>.(2)[1:swapper/0][PTP] val[2]=0x25
  4776.  
  4777. [ 1.359207] <1>.(2)[1:swapper/0][PTP] val[3]=0x75b69e
  4778.  
  4779. [ 1.359212] <1>.(2)[1:swapper/0][PTP] val[4]=0x0
  4780.  
  4781. [ 1.359217] <1>.(2)[1:swapper/0][PTP] val[5]=0x3
  4782.  
  4783. [ 1.359222] <1>.(2)[1:swapper/0][PTP] val[6]=0x0
  4784.  
  4785. [ 1.359227] <1>.(2)[1:swapper/0][PTP] val[7]=0x24000000
  4786.  
  4787. [ 1.359232] <1>.(2)[1:swapper/0][PTP] p->PTPINITEN=0x1
  4788.  
  4789. [ 1.359237] <1>.(2)[1:swapper/0][PTP] p->PTPMONEN=0x1
  4790.  
  4791. [ 1.359756] <1>.(2)[1:swapper/0][PTP] Set PTP IRQ OK.
  4792.  
  4793. [ 1.359946] <1>.(0)[1:swapper/0][Power/cpufreq] _mt_cpufreq_calc_new_opp_idx(): for ptpod init, idx = 0
  4794.  
  4795. [ 1.360168] <1>.(0)[1:swapper/0][PTP] det name=PTP_DET_CPU,det_id=0
  4796.  
  4797. [ 1.360191] <1>.(0)[1:swapper/0][PTP] @ptp_init_det(), det->VBOOT = 88
  4798.  
  4799. [ 1.360216] <1>.(0)[1:swapper/0][PTP] @ptp_init01(),vboot = 88
  4800.  
  4801. [ 1.360223] <1>-(0)[1:swapper/0][PTP] base_ops_init01(PTP_DET_CPU) start (ptp_level = 0x00000000).
  4802.  
  4803. [ 1.360371] <1>-(0)[1:swapper/0][PTP] ptp_set_ptp_volt(): cur_temp = 37100, valid = 0
  4804.  
  4805. [ 1.361042] <1>.(0)[1:swapper/0][cpu_ntf] <00>ffffffc00034f030 (cpu_hotplug_handler)
  4806.  
  4807. [ 1.361086] <1>.(0)[1:swapper/0]<HWMSEN> hwmsen_init
  4808.  
  4809. [ 1.361091] <1>.(0)[1:swapper/0]<HWMSEN> hwmsen_probe
  4810.  
  4811. [ 1.361099] <1>.(0)[1:swapper/0]<HWMSEN> hwmsen_alloc_object
  4812.  
  4813. [ 1.361616] <1>.(3)[1:swapper/0]input: hwmdata as /devices/virtual/input/input2
  4814.  
  4815. [ 1.361788] <1>.(3)[1:swapper/0]<HWMSEN> hwmsen_create_attr
  4816.  
  4817. [ 1.361847] <1>.(3)[1:swapper/0]<BATCHDEV> batch_probe 1110 : batch real driver init fail
  4818.  
  4819. [ 1.361857] <1>.(3)[1:swapper/0]<BATCHDEV> batch_init 1189 : failed to register batch driver
  4820.  
  4821. [ 1.367224] <1>-(3)[0:swapper/3][PTP] ptp_set_ptp_volt(): cur_temp = 37100, valid = 0
  4822.  
  4823. [ 1.373646] <1>.(3)[1:swapper/0][ST] lis3dh_acc_local_init: OK
  4824.  
  4825. [ 1.373652] <1>.(3)[1:swapper/0]<ACCELEROMETER> acc factory device already registed
  4826.  
  4827. [ 1.373820] <1>.(3)[1:swapper/0]input: m_acc_input as /devices/virtual/input/input3
  4828.  
  4829. [ 1.374341] <1>.(3)[1:swapper/0]ERROR,510: id=2,addr: c, transfer error
  4830.  
  4831. [ 1.374346] <1>.(3)[1:swapper/0]ERROR,516: I2C_ACKERR
  4832.  
  4833. [ 1.374351] <1>.(3)[1:swapper/0]I2C(2) dump info++++++++++++++++++++++
  4834.  
  4835. [ 1.374363] <1>.(3)[1:swapper/0]I2C structure:
  4836.  
  4837. [ 1.374363] <1>[I2C]Clk=13650,Id=2,Speed mode=0,St_rs=0,Dma_en=0,Op=3,Poll_en=0,Irq_stat=2
  4838.  
  4839. [ 1.374363] <1>[I2C]Trans_len=1,Trans_num=2,Trans_auxlen=1,Data_size=ffff,speed=100
  4840.  
  4841. [ 1.374363] <1>[I2C]Trans_stop=1,Trans_comp=0,Trans_error=2
  4842.  
  4843. [ 1.374367] <1>.(3)[1:swapper/0]base address 0xffffff8011150000
  4844.  
  4845. [ 1.374384] <1>.(3)[1:swapper/0]I2C register:
  4846.  
  4847. [ 1.374384] <1>[I2C]SLAVE_ADDR=18,INTR_MASK=f8,INTR_STAT=1,CONTROL=38,TRANSFER_LEN=1
  4848.  
  4849. [ 1.374384] <1>[I2C]TRANSAC_LEN=2,DELAY_LEN=2,TIMING=1121,START=0,FIFO_STAT=1101
  4850.  
  4851. [ 1.374384] <1>[I2C]IO_CONFIG=3,HS=102,DCM_EN=0,DEBUGSTAT=40,EXT_CONF=8001,TRANSFER_LEN_AUX=1
  4852.  
  4853. [ 1.374394] <1>.(3)[1:swapper/0]before enable DMA register(0x0):
  4854.  
  4855. [ 1.374394] <1>[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
  4856.  
  4857. [ 1.374394] <1>[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
  4858.  
  4859. [ 1.374394] <1>[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
  4860.  
  4861. [ 1.374408] <1>.(3)[1:swapper/0]DMA register(0xffffff8011146280):
  4862.  
  4863. [ 1.374408] <1>[I2C]INT_FLAG=0,INT_EN=0,EN=0,RST=0,
  4864.  
  4865. [ 1.374408] <1>[I2C]STOP=0,FLUSH=0,CON=0,TX_MEM_ADDR=0, RX_MEM_ADDR=0
  4866.  
  4867. [ 1.374408] <1>[I2C]TX_LEN=0,RX_LEN=0,INT_BUF_SIZE=0,DEBUG_STATUS=0
  4868.  
  4869. [ 1.374412] <1>.(3)[1:swapper/0]I2C(2) dump info------------------------------
  4870.  
  4871. [ 1.374424] <1>.(3)[1:s616: usb_cable_connected, connected:0, cable_mode:1
  4872.  
  4873. [ 1.377408] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: f->dev_name = f_ffs, f->name = ffs
  4874.  
  4875. [ 1.377469] <1>.(3)[1:swapper/0]file system registered
  4876.  
  4877. [ 1.377476] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: init ffs success!!
  4878.  
  4879. [ 1.377488] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: f->dev_name = f_mbim, f->name = mbim
  4880.  
  4881. [ 1.377592] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: init mbim success!!
  4882.  
  4883. [ 1.377599] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: f->dev_name = f_acm, f->name = acm
  4884.  
  4885. [ 1.377880] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: init acm success!!
  4886.  
  4887. [ 1.377897] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: f->dev_name = f_mtp, f->name = mtp
  4888.  
  4889. [ 1.378154] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: init mtp success!!
  4890.  
  4891. [ 1.378162] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: f->dev_name = f_ptp, f->name = ptp
  4892.  
  4893. [ 1.378208] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: init ptp success!!
  4894.  
  4895. [ 1.378215] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: f->dev_name = f_eem, f->name = eem
  4896.  
  4897. [ 1.378262] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: init eem success!!
  4898.  
  4899. [ 1.378273] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: f->dev_name = f_gser, f->name = gser
  4900.  
  4901. [ 1.378589] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: init gser success!!
  4902.  
  4903. [ 1.378602] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: f->dev_name = f_rndis, f->name = rndis
  4904.  
  4905. [ 1.378653] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: init rndis success!!
  4906.  
  4907. [ 1.378677] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: f->dev_name = f_mass_storage, f->name = mass_storage
  4908.  
  4909. [ 1.378731] <1>.(3)[1:swapper/0]Number of LUNs=8
  4910.  
  4911. [ 1.378742] <1>.(3)[1:swapper/0]Mass Storage Function, version: 2009/09/11
  4912.  
  4913. [ 1.378751] <1>.(3)[1:swapper/0]LUN: removable file: (no medium)
  4914.  
  4915. [ 1.378763] <1>.(3)[1:swapper/0]Number of LUNs=1
  4916.  
  4917. [ 1.378805] <1>.(3)[1:swapper/0]LUN: removable file: (no medium)
  4918.  
  4919. [ 1.378810] <1>.(3)[1:swapper/0]Number of LUNs=1
  4920.  
  4921. [ 1.378917] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: init mass_storage success!!
  4922.  
  4923. [ 1.378935] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: f->dev_name = f_accessory, f->name = accessory
  4924.  
  4925. [ 1.379049] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: init accessory success!!
  4926.  
  4927. [ 1.379056] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: f->dev_name = f_audio_source, f->name = audio_source
  4928.  
  4929. [ 1.379112] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: init audio_source success!!
  4930.  
  4931. [ 1.379119] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: f->dev_name = f_midi, f->name = midi
  4932.  
  4933. [ 1.379169] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: init midi success!!
  4934.  
  4935. [ 1.379181] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: f->dev_name = f_hid, f->name = hid
  4936.  
  4937. [ 1.379246] <1>.(3)[1:swapper/0][g_android][USB]android_init_functions: init hid success!!
  4938.  
  4939. [ 1.379259] <1>.(3)[1:swapper/0]android_usb gadget: android_usb ready
  4940.  
  4941. [ 1.379265] <1>.(3)[1:swapper/0][MUSB]musb_gadget_start 2338: musb_gadget_start
  4942.  
  4943. [ 1.379279] <1>.(3)[1:swapper/0]musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
  4944.  
  4945. [ 1.379302] <1>.(3)[1:swapper/0]musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1
  4946.  
  4947. [ 1.379948] <1>.(3)[1:swapper/0]hub 1-0:1.0: USB hub found
  4948.  
  4949. [ 1.379991] <1>.(3)[1:swapper/0]hub 1-0:1.0: 1 port detected
  4950.  
  4951. [ 1.380087] <1>-(3)[1:swapper/0][MUSB]musb_hub_control 365: try to call musb_start in virthub
  4952.  
  4953. [ 1.381254] <1>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  4954.  
  4955. [ 1.381268] <1>-(0)[0:swapper/0][Power/swap]CNT7] <1>.(0)[1:swapper/0]battery custom init by DTS
  4956.  
  4957. [ 1.411324] <1>.(0)[1:swapper/0]Get stop_charging_in_takling failed
  4958.  
  4959. [ 1.411330] <1>.(0)[1:swapper/0]Get talking_recharge_voltage failed
  4960.  
  4961. [ 1.411337] <1>.(0)[1:swapper/0]Get talking_sync_time failed
  4962.  
  4963. [ 1.411343] <1>.(0)[1:swapper/0]Get mtk_temperature_recharge_support failed
  4964.  
  4965. [ 1.411350] <1>.(0)[1:swapper/0]Get max_charge_temperature failed
  4966.  
  4967. [ 1.411357] <1>.(0)[1:swapper/0]Get max_charge_temperature_minus_x_degree failed
  4968.  
  4969. [ 1.411364] <1>.(0)[1:swapper/0]Get min_charge_temperature failed
  4970.  
  4971. [ 1.411372] <1>.(0)[1:swapper/0]Get min_charge_temperature_plus_x_degree failed
  4972.  
  4973. [ 1.411381] <1>.(0)[1:swapper/0]Get err_charge_temperature failed
  4974.  
  4975. [ 1.411388] <1>.(0)[1:swapper/0]Get v_pre2cc_thres failed
  4976.  
  4977. [ 1.411392] <1>.(0)[1:swapper/0]Get v_cc2topoff_thres failed
  4978.  
  4979. [ 1.411397] <1>.(0)[1:swapper/0]Get recharging_voltage failed
  4980.  
  4981. [ 1.411402] <1>.(0)[1:swapper/0]Get charging_full_current failed
  4982.  
  4983. [ 1.411406] <1>.(0)[1:swapper/0]Get config_usb_if failed
  4984.  
  4985. [ 1.411411] <1>.(0)[1:swapper/0]Get usb_charger_current_suspend failed
  4986.  
  4987. [ 1.411416] <1>.(0)[1:swapper/0]Get usb_charger_current_unconfigured failed
  4988.  
  4989. [ 1.411421] <1>.(0)[1:swapper/0]Get usb_charger_current_configured failed
  4990.  
  4991. [ 1.411427] <1>.(0)[1:swapper/0]Get usb_charger_current failed
  4992.  
  4993. [ 1.411432] <1>.(0)[1:swapper/0]Get ac_charger_input_current failed
  4994.  
  4995. [ 1.411436] <1>.(0)[1:swapper/0]Get ac_charger_current failed
  4996.  
  4997. [ 1.411441] <1>.(0)[1:swapper/0]Get non_std_ac_charger_current failed
  4998.  
  4999. [ 1.411446] <1>.(0)[1:swapper/0]Get charging_host_charger_current failed
  5000.  
  5001. [ 1.411450] <1>.(0)[1:swapper/0]Get apple_0_5a_charger_current failed
  5002.  
  5003. [ 1.411455] <1>.(0)[1:swapper/0]Get apple_1_0a_charger_current failed
  5004.  
  5005. [ 1.411459] <1>.(0)[1:swapper/0]Get apple_2_1a_charger_current failed
  5006.  
  5007. [ 1.411464] <1>.(0)[1:swapper/0]Get bat_low_temp_protect_enable failed
  5008.  
  5009. [ 1.411469] <1>.(0)[1:swapper/0]Get v_charger_enable failed
  5010.  
  5011. [ 1.411473] <1>.(0)[1:swapper/0]Get v_charger_max failed
  5012.  
  5013. [ 1.411478] <1>.(0)[1:swapper/0]Get v_charger_min failed
  5014.  
  5015. [ 1.411483] <1>.(0)[1:swapper/0]Get onehundred_percent_tracking_time failed
  5016.  
  5017. [ 1.411487] <1>.(0)[1:swapper/0]Get npercent_tracking_time failed
  5018.  
  5019. [ 1.411492] <1>.(0)[1:swapper/0]Get sync_to_real_tracking_time failed
  5020.  
  5021. [ 1.411496] <1>.(0)[1:swapper/0]Get v_0percent_tracking failed
  5022.  
  5023. [ 1.411501] <1>.(0)[1:swapper/0]Get high_battery_voltage_support failed
  5024.  
  5025. [ 1.411506] <1>.(0)[1:swapper/0]Get mtk_jeita_standard_support failed
  5026.  
  5027. [ 1.411511] <1>.(0)[1:swapper/0]Get cust_soc_jeita_sync_time failed
  5028.  
  5029. [ 1.411516] <1>.(0)[1:swapper/0]Get jeita_recharge_voltage failed
  5030.  
  5031. [ 1.411521] <1>.(0)[1:swapper/0]Get jeita_temp_above_pos_60_cv_voltage failed
  5032.  
  5033. [ 1.411525] <1>.(0)[1:swapper/0]Get jeita_temp_pos_10_to_pos_45_cv_voltage failed
  5034.  
  5035. [ 1.411530] <1>.(0)[1:swapper/0]Get jeita_temp_pos_0_to_pos_10_cv_voltage failed
  5036.  
  5037. [ 1.411535] <1>.(0)[1:swapper/0]Get jeita_temp_neg_10_to_pos_0_cv_voltage failed
  5038.  
  5039. [ 1.411540] <1>.(0)[1:swapper/0]Get jeita_temp_below_neg_10_cv_voltage failed
  5040.  
  5041. [ 1.411544] <1>.(0)[1:swapper/0]Get jeita_neg_10_to_pos_0_full_current failed
  5042.  
  5043. [ 1.411549] <1>.(0)[1:swapper/0]Get jeita_temp_pos_45_to_pos_60_recharge_voltage failed
  5044.  
  5045. [ 1.411553] <1>.(0)[1:swapper/0]Get jeita_temp_pos_10_to_pos_45_recharge_voltage failed
  5046.  
  5047. [ 1.411558] <1>.(0)[1:swapper/0]Get jeita_temp_pos_0_to_pos_10_recharge_voltage failed
  5048.  
  5049. [ 1.411563] <1>.(0)[1:swapper/0]Get jeita_temp_neg_10_to_pos_0_recharge_voltage failed
  5050.  
  5051. [ 1.411568] <1>.(0)[1:swapper/0]Get jeita_temp_pos_45_to_pos_60_cc2topoff_threshold failed
  5052.  
  5053. [ 1.411572] <1>.(0)[1:swapper/0]Get jeita_temp_pos_10_to_pos_45_cc2topoff_threshold failed
  5054.  
  5055. [ 1.411577] <1>.(0)[1:swapper/0]Get jeita_temp_pos_0_to_pos_10_cc2topoff_threshold failed
  5056.  
  5057. [ 1.411582] <1>.(0)[1:swapper/0]Get jeita_temp_neg_10_to_pos_0_cc2topoff_threshold failed
  5058.  
  5059. [ 1.411588] <1>.(0)[1: 1.414103] <1>.(3)[1:swapper/0]proc_create battery_cmd_proc_fops
  5060.  
  5061. [ 1.414111] <1>.(3)[1:swapper/0]proc_create current_cmd_proc_fops
  5062.  
  5063. [ 1.414120] <1>.(3)[1:swapper/0]proc_create discharging_cmd_proc_fops
  5064.  
  5065. [ 1.414124] <1>.(3)[1:swapper/0]******** mtk_battery_cmd!! ********
  5066.  
  5067. [ 1.414680] <1>.(3)[1:swapper/0]****[battery_driver] Initialization : DONE !!
  5068.  
  5069. [ 1.414700] <1>.(3)[1:swapper/0]BOOTPROF: 1414.694925:initcall: battery_init 32.718230ms
  5070.  
  5071. [ 1.415218] <1>.(2)[1:swapper/0]vaud28: disabling
  5072.  
  5073. [ 1.415225] <1>.(2)[1:swapper/0]vaud28: couldn't disable: -1
  5074.  
  5075. [ 1.415280] <1>.(3)[102:kworker/u8:1][WDK] WDT start kicker done CPU_NR=4
  5076.  
  5077. [ 1.415318] <1>.(2)[1:swapper/0]vsram: disabling
  5078.  
  5079. [ 1.415323] <1>.(2)[1:swapper/0]vsram: couldn't disable: -1
  5080.  
  5081. [ 1.415336] <1>.(3)[102:kworker/u8:1][cpu_ntf] <00>ffffffc000705b84 (wk_cpu_callback)
  5082.  
  5083. [ 1.415340] <1>.(2)[1:swapper/0]vm: disabling
  5084.  
  5085. [ 1.415344] <1>.(2)[1:swapper/0]vm: couldn't disable: -1
  5086.  
  5087. [ 1.415412] <1>.(3)[102:kworker/u8:1][WDK]init_wk done late_initcall cpus_kick_bit=0xf -----
  5088.  
  5089. [ 1.415889] <1>-(2)[1:swapper/0][DFS]dfs_dummy_buffer va: 0xffffffc001098000, dst_pa: 0x41098000, size: 256
  5090.  
  5091. [ 1.417776] <1>.(2)[1:swapper/0][VcoreFS] [late_init_to_lowpwr_opp] feature_en: 1, late_init_opp: 2
  5092.  
  5093. [ 1.417826] <1>.(2)[1:swapper/0]ALSA device list:
  5094.  
  5095. [ 1.417831] <1>.(2)[1:swapper/0] #0: mt-snd-card
  5096.  
  5097. [ 1.471058] <1>-(0)[158:bat_thread_kthr]mtk_rtc_hal_common: rtc_spare_reg[0] = {16412, 127, 8}
  5098.  
  5099. [ 1.472914] <1>.(0)[158:bat_thread_kthr][BAT_thread]Cable out
  5100.  
  5101. [ 1.472920] <1>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  5102.  
  5103. [ 1.472934] <1>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  5104.  
  5105. [ 1.472962] <1>.(3)[102:kworker/u8:1][MUSB]do_connection_work 431: is ready 0 is_host 0 power 0
  5106.  
  5107. [ 1.472970] <1>.(3)[102:kworker/u8:1][MUSB]do_connection_work 445: issue work after 50 ms
  5108.  
  5109. [ 1.486647] <1>.(0)[158:bat_thread_kthr][FGADC] 0,4557,0,3948,74,72,72,1428,1428,146,0,0,1000,3802,1000,28,28,101,103
  5110.  
  5111. [ 1.486864] <1>.(0)[158:bat_thread_kthr]AvgVbat=(3802,3802),AvgI=(0,0),VChr=66,AvgT=(24,24),SOC=(72,72),UI_SOC=0,ZCV=3948,CHR_Type=0 bcct:0:0 I:7000 Ibat:-455
  5112.  
  5113. [ 1.486878] <1>.(0)[158:bat_thread_kthr]v=3802,i=0,t=24,soc=0,bcct:0:0 I:7000 Ibat:-455
  5114.  
  5115. [ 1.487020] <1>.(0)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  5116.  
  5117. [ 1.487147] <1>.(0)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  5118.  
  5119. [ 1.487153] <1>.(0)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  5120.  
  5121. [ 1.488381] <1>-(3)[51:kworker/3:1][MUSB]musb_hub_control 347: port status 00000100,devctl=0x98
  5122.  
  5123. [ 1.518339] <1>.(3)[102:kworker/u8:1][MUSB]do_connection_work 431: is ready 0 is_host 0 power 0
  5124.  
  5125. [ 1.824114] <0>.(1)[114:kworker/u8:2][sd]msdc_apply_ett_settings:msdc0,reg[0xb0],offset[0x7c00],val[0x0],readback[0x403c000f]
  5126.  
  5127. [ 1.824123] <0>.(1)[114:kworker/u8:2][sd]msdc_apply_ett_settings:msdc0,reg[0xb4],offset[0x38],val[0x1],readback[0xfffe00c9]
  5128.  
  5129. [ 1.824131] <0>.(1)[114:kworker/u8:2][sd]msdc_apply_ett_settings:msdc0,reg[0x4],offset[0x2],val[0x1],readback[0xa]
  5130.  
  5131. [ 1.824140] <0>.(1)[114:kworker/u8:2][sd]msdc_apply_ett_settings:msdc0,reg[0xf0],offset[0x1f0000],val[0x0],readback[0x8000]
  5132.  
  5133. [ 1.824148] <0>.(1)[114:kworker/u8:2][sd]msdc_apply_ett_settings:msdc0,reg[0xf0],offset[0x7c00000],val[0x6],readback[0x1808000]
  5134.  
  5135. [ 1.824156] <0>.(1)[114:kworker/u8:2][sd]msdc_apply_ett_settings:msdc0,reg[0xb4],offset[0x7],val[0x1],readback[0xfffe00c9]
  5136.  
  5137. [ 1.824164] <0>.(1)[114:kworker/u8:2][sd]msdc_apply_ett_settings:msdc0,reg[0xf0],offset[0x1f],val[0xf],readback[0x180800f]
  5138.  
  5139. [ 1.824172] <0>.(1)[114:kworker/u8:2][sd]msdc_apply_ett_settings:msdc0,reg[0x4],offset[0x400],val[0x1],readback[0x40a]
  5140.  
  5141. [ 1.824180] <0>.(1)[114:kworker/u8:2][sd]msdc_apply_ett_settings:msdc0,reg[0xf8],offset[0x1f000000],val[0x5],readback[0x5000000]
  5142.  
  5143. [ 1.824188] <0>.(1)[114:kworker/u8:2][sd]msdc_apply_ett_setting(0)[1:swapper/0]BOOTPROF: 1864.034541:Kernel_init_done
  5144.  
  5145. [ 1.868021] <1>.(1)[1:init]init: init first stage started!
  5146.  
  5147. [ 1.967083] <1>.(1)[1:init]audit: type=1403 audit(1420070534.070:2): policy loaded auid=4294967295 ses=4294967295
  5148.  
  5149. [ 1.969255] <1>.(1)[1:init]audit: type=1404 audit(1420070534.080:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  5150.  
  5151. [ 1.980340] [sd]msdc1 -> !!! Set<0 Hz>
  5152.  
  5153. [ 1.980854] <0>.(0)[114:kworker/u8:2][sd]msdc LDO<1> change<3000> to <1800>
  5154.  
  5155. [ 2.018708] <2>.(2)[1:init]init: (Initializing SELinux enforcing took 0.15s.)
  5156.  
  5157. [ 2.026124] <1>.(1)[1:init]init: init second stage started!
  5158.  
  5159. [ 2.045355] <0>.(0)[1:init]init: Running restorecon...
  5160.  
  5161. [ 2.113231] <2>.(2)[114:kworker/u8:2]mmc1: new ultra high speed SDR104 SDHC card at address 0001
  5162.  
  5163. [ 2.115071] <0>.(0)[114:kworker/u8:2]mmcblk1: mmc1:0001 EB1QT 29.8 GiB
  5164.  
  5165. [ 2.118090] <1>.(1)[60:kworker/1:1][sd]msdc1 -> XXX CMD<18>.arg<0x03b9fff8>,DAT block<8> Error<-5> <- msdc_dump_trans_error() : L<6601> PID<kworker/1:1><0x3c>
  5166.  
  5167. [ 2.119925] <1>.(1)[60:kworker/1:1][sd]msdc1 -> XXX STOP<12><0x0> Error<0> Resp<0x0> <- msdc_dump_trans_error() : L<6605> PID<kworker/1:1><0x3c>
  5168.  
  5169. [ 2.121564] <1>.(1)[60:kworker/1:1][sd]msdc1 -> state<5> need cmd12 to stop <- msdc_status_verify_case1() : L<2646> PID<kworker/1:1><0x3c>
  5170.  
  5171. [ 2.123410] <1>.(1)[60:kworker/1:1][sd]msdc1 -> CRC TUNE READ Times(1) <- msdc_reset_crc_tune_counter() : L<1874> PID<kworker/1:1><0x3c>
  5172.  
  5173. [ 2.125100] <1>.(1)[114:kworker/u8:2] mmcblk1: p1
  5174.  
  5175. [ 2.267223] <0>.(0)[1:init]init: waitpid failed: No child processes
  5176.  
  5177. [ 2.268706] <0>.(0)[1:init]init: (Loading properties from /default.prop took 0.00s.)
  5178.  
  5179. [ 2.272912] <0>.(0)[1:init]init: (Parsing /init.environ.rc took 0.00s.)
  5180.  
  5181. [ 2.274397] <0>.(0)[1:init]init: (Parsing /init.usb.rc took 0.00s.)
  5182.  
  5183. [ 2.276700] <0>.(0)[1:init]init: /init.mt6735.rc: 332: invalid keyword 'mknod'
  5184.  
  5185. [ 2.277953] <0>.(0)[1:init]init: /init.mt6735.rc: 463: invalid keyword 'mknod'
  5186.  
  5187. [ 2.278925] <0>.(0)[1:init]init: /init.mt6735.rc: 470: invalid keyword 'mknod'
  5188.  
  5189. [ 2.281309] <0>.(0)[1:init]init: /init.mt6735.rc: 763: invalid keyword 'setprop'
  5190.  
  5191. [ 2.282257] <0>.(0)[1:init]init: /init.mt6735.rc: 764: invalid keyword 'setprop'
  5192.  
  5193. [ 2.283194] <0>.(0)[1:init]init: /init.mt6735.rc: 765: invalid keyword 'setprop'
  5194.  
  5195. [ 2.284129] <0>.(0)[1:init]init: /init.mt6735.rc: 766: invalid keyword 'setprop'
  5196.  
  5197. [ 2.285065] <0>.(0)[1:init]init: /init.mt6735.rc: 767: invalid keyword 'setprop'
  5198.  
  5199. [ 2.286000] <0>.(0)[1:init]init: /init.mt6735.rc: 768: invalid keyword 'setprop'
  5200.  
  5201. [ 2.286934] <0>.(0)[1:init]init: /init.mt6735.rc: 769: invalid keyword 'setprop'
  5202.  
  5203. [ 2.287869] <0>.(0)[1:init]init: /init.mt6735.rc: 770: invalid keyword 'setprop'
  5204.  
  5205. [ 2.288851] <0>.(0)[1:init]init: /init.mt6735.rc: 771: invalid keyword 'setprop'
  5206.  
  5207. [ 2.289788] <0>.(0)[1:init]init: /init.mt6735.rc: 772: invalid keyword 'setprop'
  5208.  
  5209. [ 2.290723] <0>.(0)[1:init]init: /init.mt6735.rc: 774: invalid keyword 'setprop'
  5210.  
  5211. [ 2.293332] <0>.(0)[1:init]init: /init.mt6735.rc: 1422: invalid keyword 'chomd'
  5212.  
  5213. [ 2.294338] <0>.(0)[1:init]init: /init.mt6735.rc: 1450: invalid keyword 'enabled'
  5214.  
  5215. [ 2.295944] <0>.(0)[1:init]init: (Parsing init.connectivity.rc took 0.00s.)
  5216.  
  5217. [ 2.297046] init: ignored duplicate definition of service 'atci_service'init: ignored duplicate definition of service 'atcid-daemon-u'init: ignored duplicate definition of service 'atcid-daemon-e'init: ignored duplicate definition of service 'audio-daemon'init: (Parsing init.mt6735.usb.rc took 0.00s.)
  5218.  
  5219. [ 2.304375] <0>.(0)[1:init]init: (Parsing init.project.rc took 0.01s.)
  5220.  
  5221. [ 2.305283] <0>.(0)[1:init]init: could not import file '/FWUpgradeInit.rc' from '/init.mt6735.rc': No such file or directory
  5222.  
  5223. [ 2.306959] <0>.(0)[1:init]init: could not import file '/init.preload.rc' from 'init.aee.rc': No such file or directory
  5224.  
  5225. [ 2.308382] <0>.(0)[1:init]init: (Parsing init.aee.rc took 0.00s.)
  5226.  
  5227. [ 2.309193] <0>.(0)[1:init]init: could not import file 'init.fon.rc' from '/init.mt6735.rc': No such file or directory
  5228.  
  5229. [ 2.310905] <0>.(0)[1:init]init: (Parsing init.rilproxy.rc took 0.00s.)
  5230.  
  5231. [ 2.311965] <0>.(0)[1:init]init: (Parsing init.volte.rc took 0.00s.)
  5232.  
  5233. [ 2.312805] <0>.(0)[1:init]init: could not import file 'init.mal.rc' from '/init.mt6735.rc': No such file or directory
  5234.  
  5235. [ 2.314172] <0>.(0)[1:init]init: could not import file 'init.wfca.rc' from '/init.mt6735.rc': No such file or directory
  5236.  
  5237. [ 2.315591] <0>.(0)[1:init]init: (Parsing init.epdg.rc took 0.00s.)
  5238.  
  5239. [ 2.316412] <0>.(0)[1:init]init: could not import file 'init.trustonic.rc' from '/init.mt6735.rc': No such file or directory
  5240.  
  5241. [ 2.318031] <0>.(0)[1:init]init: (Parsing init.microtrust.rc took 0.00s.)
  5242.  
  5243. [ 2.319121] <0>.(0)[1:init]init: (Parsing init.common_svc.rc took 0.00s.)
  5244.  
  5245. [ 2.320026] <0>.(0)[1:init]init: could not import file 'init.c2k.rc' from '/init.mt6735.rc': No such file or directory
  5246.  
  5247. [ 2.321774] init: ignored duplicate definition of service 'ril-daemon-mtk'init: init.modem.rc: 90: invalid service name 'ril-daemon-mtkmd2'
  5248.  
  5249. [ 2.323396] init: ignored duplicate definition of service 'md_minilog_util'init: ignored duplicate definition of service 'pppd_gprs'init: (Parsing init.modem.rc took 0.00s.)
  5250.  
  5251. [ 2.325531] <0>.(0)[1:init]init: (Parsing /init.mt6735.rc took 0.05s.)
  5252.  
  5253. [ 2.327468] <0>.(0)[1:init]init: (Parsing /init.usb.configfs.rc took 0.00s.)
  5254.  
  5255. [ 2.328660] <0>.(0)[1:init]init: (Parsing /init.zygote64_32.rc took 0.00s.)
  5256.  
  5257. [ 2.329545] <0>.(0)[1:init]init: (Parsing /init.rc took 0.06s.)
  5258.  
  5259. [ 2.331187] <0>.(0)[1:init]init: Starting service 'ueventd'...
  5260.  
  5261. [ 2.332869] <0>.(0)[1:init]BOOTPROF: 2332.852927:INIT:early-init
  5262.  
  5263. [ 2.335228] <0>.(0)[1:init]init: Waiting for /dev/.coldboot_done...
  5264.  
  5265. [ 2.336743] <2>.(2)[171:ueventd]ueventd: ueventd started!
  5266.  
  5267. [ 2.408451] <2>.(2)[117:kworker/2:1]get expdb info
  5268.  
  5269. [ 2.412701] <0>.(0)[158:bat_thread_kthr][BAT_thread]Cable out
  5270.  
  5271. [ 2.413447] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  5272.  
  5273. [ 2.414356] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  5274.  
  5275. [ 2.428013] <2>.(2)[158:bat_thread_kthr][FGADC] 0,4985,0,3948,74,72,72,1428,1428,161,0,0,1000,3794,1000,28,28,101,103
  5276.  
  5277. [ 2.429766] <2>.(2)[158:bat_thread_kthr]AvgVbat=(3801,3794),AvgI=(0,0),VChr=66,AvgT=(24,24),SOC=(72,72),UI_SOC=72,ZCV=3948,CHR_Type=0 bcct:0:0 I:7000 Ibat:-503
  5278.  
  5279. [ 2.431556] <2>.(2)[158:bat_thread_kthr]v=3794,i=0,t=24,soc=72,bcct:0:0 I:7000 Ibat:-503
  5280.  
  5281. [ 2.432566] <2>.(2)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  5282.  
  5283. [ 2.433513] <2>.(2)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  5284.  
  5285. [ 2.434453] <2>.(2)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  5286.  
  5287. [ 2.488387] <1>-(1)[102:kworker/u8:1]do_connection_work: 35 callbacks suppressed
  5288.  
  5289. [ 2.489320] <1>.(1)[102:kworker/u8:1][MUSB]do_connection_work 431: is ready 0 is_host 0 power 0
  5290.  
  5291. [ 2.490403] <1>.(1)[102:kworker/u8:1][MUSB]do_connection_work 445: issue work after 50 ms
  5292.  
  5293. [ 2.538411] <1>.(1)[102:kworker/u8:1][MUSB]do_connection_work 431: is ready 0 is_host 0 power 0
  5294.  
  5295. [ 2.627083] <1>.(1)[98:hps_main]CPU2: shutdown
  5296.  
  5297. [ 2.628563] <1>.(1)[98:hps_main][HPS] (0200)(3)action end(104)(103)(0)(1) (4)(4)(4)(4)(1) (218)(8)(0) (1006)(8)(0) (0)(103)(8)(0)(103) wifi_base(0)
  5298.  
  5299. [ 3.244337] <0>.(0)[171:ueventd]ueventd: Coldboot took 0.90s.
  5300.  
  5301. [ 3.249953] <1>.(1)[1:init]init: Waiting for /dev/.coldboot_done took 0.91s.
  5302.  
  5303. [ 3.250960] <1>.(1)[1:init]init: /dev/hw_random not found
  5304.  
  5305. [ 3.252727] <1>.(1)[1:init]init: could not open /dev/keychord: No such file or directory
  5306.  
  5307. [ 3.270631] <1>.(1)[1:init]init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
  5308.  
  5309. [ 3.272157] <1>.(1)[1:init]init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory
  5310.  
  5311. [ 3.287527] <1>.(1)[1:init]Registered swp emulation handler
  5312.  
  5313. [ 3.292463] <1>.(1)[1:init]init: /dev/hw_random not found
  5314.  
  5315. [ 3.293343] <1>.(1)[1:init]BOOTPROF: 3293.335391:INIT:late-init
  5316.  
  5317. [ 3.294268] <1>.(1)[1:init]BOOTPROF: 3294.262237:INIT:Mount_START
  5318.  
  5319. [ 3.295241] <1>.(1)[1:init]audit: type=1400 audit(1420070535.400:4): avc: denied { write } for pid=1 comm="init" name="trace_marker" dev="debugfs" ino=22 scontext=u:r:init:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
  5320.  
  5321. [ 3.297840] <1>.(1)[1:init]init: write_file: Unable to open '/sys/kernel/debug/tracing/trace_marker': Permission denied
  5322.  
  5323. [ 3.300957] <0>.(0)[173:init]fs_mgr: blk device name /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/system
  5324.  
  5325. [ 3.302404] <0>.(0)[173:init]fs_mgr: __mount: target='/system, encryptable=0
  5326.  
  5327. [ 3.303301] fs_mgr: __mount: 'nvdata' partition exists!
  5328.  
  5329. [ 3.307698] <1>.(1)[173:init]EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: (null)
  5330.  
  5331. [ 3.309394] <1>.(1)[173:init]fs_mgr: __mount(source=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/system,target=/system,type=ext4)=0
  5332.  
  5333. [ 3.311144] <1>.(1)[173:init]fs_mgr: blk device name /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata
  5334.  
  5335. [ 3.313076] <1>.(1)[173:init]EXT4-fs (mmcblk0p22): Ignoring removed nomblk_io_submit option
  5336.  
  5337. [ 3.318776] <0>.(0)[173:init]EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  5338.  
  5339. [ 3.320519] <0>.(0)[173:init]fs_mgr: check_fs(): mount(/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata,/data,ext4)=0: Success
  5340.  
  5341. [ 3.349690] <0>.(0)[173:init]fs_mgr: check_fs(): unmount(/data) succeeded
  5342.  
  5343. [ 3.351487] <0>.(0)[173:init]fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata
  5344.  
  5345. [ 3.363003] <1>.(1)[180:e2fsck]random: e2fsck urandom read with 12 bits of entropy available
  5346.  
  5347. [ 3.538340] <1>-(1)[102:kworker/u8:1]do_connection_work: 39 callbacks suppressed
  5348.  
  5349. [ 3.539268] <1>.(1)[102:kworker/u8:1][MUSB]do_connection_work 431: is ready 0 is_host 0 power 0
  5350.  
  5351. [ 3.540348] <1>.(1)[102:kworker/u8:1][MUSB]do_connection_work 445: issue work after 50 ms
  5352.  
  5353. [ 3.588404] <1>.(1)[102:kworker/u8:1][MUSB]do_connection_work 431: is ready 0 is_host 0 power 0
  5354.  
  5355. [ 3.628838] <1>.(1)[173:init]e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  5356.  
  5357. [ 3.628838] <1>
  5358.  
  5359. [ 3.629851] <1>.(1)[173:init]e2fsck: Pass 1: Checking inodes, blocks, and sizes
  5360.  
  5361. [ 3.629851] <1>
  5362.  
  5363. [ 3.630984] <1>.(1)[173:init]e2fsck: Pass 2: Checking directory structure
  5364.  
  5365. [ 3.630984] <1>
  5366.  
  5367. [ 3.632071] <1>.(1)[173:init]e2fsck: Pass 3: Checking directory connectivity
  5368.  
  5369. [ 3.632071] <1>
  5370.  
  5371. [ 3.633172] <1>.(1)[173:init]e2fsck: Pass 4: Checking reference counts
  5372.  
  5373. [ 3.633172] <1>
  5374.  
  5375. [ 3.634207] <1>.(1)[173:init]e2fsck: Pass 5: Checking group summary information
  5376.  
  5377. [ 3.634207] <1>
  5378.  
  5379. [ 3.635342] <1>.(1)[173:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata: 13/786432 files (0.0% non-contiguous), 89807/3140992 blocks
  5380.  
  5381. [ 3.635342] <1>
  5382.  
  5383. [ 3.637596] <1>.(1)[173:init]fs_mgr: Running /vendor/bin/resize_ext4 on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata
  5384.  
  5385. [ 3.665401] <1>.(1)[181:resize_ext4]resize: Size for partition(/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata) is 12563968K.
  5386.  
  5387. [ 3.666999] <1>.(1)[181:resize_ext4]resize: Size in superblock is 12563968K.
  5388.  
  5389. [ 3.667896] <1>.(1)[181:resize_ext4]resize: Size will (maybe) resize to(after adjust) is 12563968K.
  5390.  
  5391. [ 3.669155] <1>.(1)[181:resize_ext4]resize: The size of data already meet the request(size in superblock = size after adjust).
  5392.  
  5393. [ 3.670687] <1>.(1)[181:resize_ext4]resize: Partition has been resized,so nothing to do!
  5394.  
  5395. [ 3.671702] <1>.(1)[181:resize_ext4]resize: Resize ext4 return 0
  5396.  
  5397. [ 3.673945] <0>.(0)[173:init]fs_mgr: Resize ext4 return 0
  5398.  
  5399. [ 3.675190] <0>.(0)[173:init]EXT4-fs (mmcblk0p22): Ignoring removed nomblk_io_submit option
  5400.  
  5401. [ 3.678777] <1>.(1)[173:init]EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  5402.  
  5403. [ 3.680464] <1>.(1)[173:init]fs_mgr: check_fs(): mount(/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata,/data,ext4)=0: Success
  5404.  
  5405. [ 3.719516] <1>.(1)[173:init]fs_mgr: check_fs(): unmount(/data) succeeded
  5406.  
  5407. [ 3.720420] <1>.(1)[173:init]fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata
  5408.  
  5409. [ 3.936325] <1>.(1)[173:init]e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  5410.  
  5411. [ 3.936325] <1>
  5412.  
  5413. [ 3.937330] <1>.(1)[173:init]e2fsck: Pass 1: Checking inodes, blocks, and sizes
  5414.  
  5415. [ 3.937330] <1>
  5416.  
  5417. [ 3.938517] <1>.(1)[173:init]e2fsck: Pass 2: Checking directory structure
  5418.  
  5419. [ 3.938517] <1>
  5420.  
  5421. [ 3.939587] <1>.(1)[173:init]e2fsck: Pass 3: Checking directory connectivity
  5422.  
  5423. [ 3.939587] <1>
  5424.  
  5425. [ 3.940719] <1>.(1)[173:init]e2fsck: Pass 4: Checking reference counts
  5426.  
  5427. [ 3.940719] <1>
  5428.  
  5429. [ 3.941755] <1>.(1)[173:init]e2fsck: Pass 5: Checking group summary information
  5430.  
  5431. [ 3.941755] <1>
  5432.  
  5433. [ 3.942890] <1>.(1)[173:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata: 13/786432 files (0.0% non-contiguous), 89807/3140992 blocks
  5434.  
  5435. [ 3.942890] <1>
  5436.  
  5437. [ 3.945154] <1>.(1)[173:init]fs_mgr: __mount: target='/data, encryptable=0
  5438.  
  5439. [ 3.946030] fs_mgr: __mount: 'nvdata' partition exists!
  5440.  
  5441. [ 3.949781] <1>.(1)[173:init]EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
  5442.  
  5443. [ 3.951338] <1>.(1)[173:init]fs_mgr: __mount(source=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/userdata,target=/data,type=ext4)=0
  5444.  
  5445. [ 3.992393] <0>.(0)[173:init]fs_mgr: blk device name /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/cache
  5446.  
  5447. [ 3.995236] <0>.(0)[173:init]EXT4-fs (mmcblk0p21): Ignoring removed nomblk_io_submit option
  5448.  
  5449. [ 4.000890] <0>.(0)[173:init]EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  5450.  
  5451. [ 4.002936] <0>.(0)[173:init]fs_mgr: check_fs(): mount(/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/cache,/cache,ext4)=0: Success
  5452.  
  5453. [ 4.051088] <0>.(0)[173:init]fs_mgr: check_fs(): unmount(/cache) succeeded
  5454.  
  5455. [ 4.052126] <0>.(0)[173:init]fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/cache
  5456.  
  5457. [ 4.068613] <1>.(1)[60:kworker/1:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:NO-CDEV
  5458.  
  5459. [ 4.123527] <1>.(1)[173:init]e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  5460.  
  5461. [ 4.123527] <1>
  5462.  
  5463. [ 4.124533] <1>.(1)[173:init]e2fsck: Pass 1: Checking inodes, blocks, and sizes
  5464.  
  5465. [ 4.124533] <1>
  5466.  
  5467. [ 4.125667] <1>.(1)[173:init]e2fsck: Pass 2: Checking directory structure
  5468.  
  5469. [ 4.125667] <1>
  5470.  
  5471. [ 4.126735] <1>.(1)[173:init]e2fsck: Pass 3: Checking directory connectivity
  5472.  
  5473. [ 4.126735] <1>
  5474.  
  5475. [ 4.127835] <1>.(1)[173:init]e2fsck: Pass 4: Checking reference counts
  5476.  
  5477. [ 4.127835] <1>
  5478.  
  5479. [ 4.128941] <1>.(1)[173:init]e2fsck: Pass 5: Checking group summary information
  5480.  
  5481. [ 4.128941] <1>
  5482.  
  5483. [ 4.130077] <1>.(1)[173:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/cache: 26/25600 files (3.8% non-contiguous), 3348/102400 blocks
  5484.  
  5485. [ 4.130077] <1>
  5486.  
  5487. [ 4.132297] <1>.(1)[173:init]fs_mgr: __mount: target='/cache, encryptable=3
  5488.  
  5489. [ 4.133202] fs_mgr: __mount: 'nvdata' partition exists!
  5490.  
  5491. [ 4.136155] <1>.(1)[173:init]EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
  5492.  
  5493. [ 4.137715] <1>.(1)[173:init]fs_mgr: __mount(source=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/cache,target=/cache,type=ext4)=0
  5494.  
  5495. [ 4.139369] <1>.(1)[173:init]fs_mgr: blk device name /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1
  5496.  
  5497. [ 4.141346] <1>.(1)[173:init]EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
  5498.  
  5499. [ 4.145431] <0>.(0)[173:init]EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  5500.  
  5501. [ 4.147082] <0>.(0)[173:init]fs_mgr: check_fs(): mount(/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1,/protect_f,ext4)=0: Success
  5502.  
  5503. [ 4.192104] <0>.(0)[173:init]fs_mgr: check_fs(): unmount(/protect_f) succeeded
  5504.  
  5505. [ 4.193188] <0>.(0)[173:init]fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1
  5506.  
  5507. [ 4.249769] <0>.(0)[173:init]e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  5508.  
  5509. [ 4.249769] <0>
  5510.  
  5511. [ 4.250774] <0>.(0)[173:init]e2fsck: Pass 1: Checking inodes, blocks, and sizes
  5512.  
  5513. [ 4.250774] <0>
  5514.  
  5515. [ 4.251908] <0>.(0)[173:init]e2fsck: Pass 2: Checking directory structure
  5516.  
  5517. [ 4.251908] <0>
  5518.  
  5519. [ 4.252976] <0>.(0)[173:init]e2fsck: Pass 3: Checking directory connectivity
  5520.  
  5521. [ 4.252976] <0>
  5522.  
  5523. [ 4.254075] <0>.(0)[173:init]e2fsck: Pass 4: Checking reference counts
  5524.  
  5525. [ 4.254075] <0>
  5526.  
  5527. [ 4.255111] <0>.(0)[173:init]e2fsck: Pass 5: Checking group summary information
  5528.  
  5529. [ 4.255111] <0>
  5530.  
  5531. [ 4.256246] <0>.(0)[173:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1: 15/640 files (0.0% non-contiguous), 1083/2560 blocks
  5532.  
  5533. [ 4.256246] <0>
  5534.  
  5535. [ 4.258480] <1>.(1)[173:init]fs_mgr: __mount: target='/protect_f, encryptable=3
  5536.  
  5537. [ 4.259416] fs_mgr: __mount: 'nvdata' partition exists!
  5538.  
  5539. [ 4.262549] <1>.(1)[173:init]EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,commit=1,nodelalloc
  5540.  
  5541. [ 4.264213] <1>.(1)[173:init]fs_mgr: __mount(source=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect1,target=/protect_f,type=ext4)=0
  5542.  
  5543. [ 4.265883] <1>.(1)[173:init]fs_mgr: blk device name /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2
  5544.  
  5545. [ 4.267838] <1>.(1)[173:init]EXT4-fs (mmcblk0p4): Ignoring removed nomblk_io_submit option
  5546.  
  5547. [ 4.272151] <0>.(0)[173:init]EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  5548.  
  5549. [ 4.273803] <0>.(0)[173:init]fs_mgr: check_fs(): mount(/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2,/protect_s,ext4)=0: Success
  5550.  
  5551. [ 4.309612] <1>.(1)[173:init]fs_mgr: check_fs(): unmount(/protect_s) succeeded
  5552.  
  5553. [ 4.310567] <1>.(1)[173:init]fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2
  5554.  
  5555. [ 4.345333] <1>.(1)[173:init]e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  5556.  
  5557. [ 4.345333] <1>
  5558.  
  5559. [ 4.346340] <1>.(1)[173:init]e2fsck: Pass 1: Checking inodes, blocks, and sizes
  5560.  
  5561. [ 4.346340] <1>
  5562.  
  5563. [ 4.347474] <1>.(1)[173:init]e2fsck: Pass 2: Checking directory structure
  5564.  
  5565. [ 4.347474] <1>
  5566.  
  5567. [ 4.348643] <1>.(1)[173:init]e2fsck: Pass 3: Checking directory connectivity
  5568.  
  5569. [ 4.348643] <1>
  5570.  
  5571. [ 4.349745] <1>.(1)[173:init]e2fsck: Pass 4: Checking reference counts
  5572.  
  5573. [ 4.349745] <1>
  5574.  
  5575. [ 4.350780] <1>.(1)[173:init]e2fsck: Pass 5: Checking group summary information
  5576.  
  5577. [ 4.350780] <1>
  5578.  
  5579. [ 4.351916] <1>.(1)[173:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2: 15/640 files (0.0% non-contiguous), 1083/2560 blocks
  5580.  
  5581. [ 4.351916] <1>
  5582.  
  5583. [ 4.354117] <1>.(1)[173:init]fs_mgr: __mount: target='/protect_s, encryptable=3
  5584.  
  5585. [ 4.355048] fs_mgr: __mount: 'nvdata' partition exists!
  5586.  
  5587. [ 4.358203] <0>.(0)[173:init]EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,commit=1,nodelalloc
  5588.  
  5589. [ 4.359924] <0>.(0)[173:init]fs_mgr: __mount(source=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/protect2,target=/protect_s,type=ext4)=0
  5590.  
  5591. [ 4.361596] <0>.(0)[173:init]fs_mgr: blk device name /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata
  5592.  
  5593. [ 4.363575] <0>.(0)[173:init]EXT4-fs (mmcblk0p18): Ignoring removed nomblk_io_submit option
  5594.  
  5595. [ 4.368006] <1>.(1)[173:init]EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  5596.  
  5597. [ 4.369770] <1>.(1)[173:init]fs_mgr: check_fs(): mount(/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata,/nvdata,ext4)=0: Success
  5598.  
  5599. [ 4.419667] <1>.(1)[173:init]fs_mgr: check_fs(): unmount(/nvdata) succeeded
  5600.  
  5601. [ 4.420594] <1>.(1)[173:init]fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata
  5602.  
  5603. [ 4.434608] <0>.(0)[98:hps_main]CPU1: shutdown
  5604.  
  5605. [ 4.436519] <0>.(0)[98:hps_main][HPS] (0200)(2)action end(60)(53)(0)(1) (4)(4)(4)(4)(1) (135)(18)(0) (626)(18)(2) (0)(53)(18)(0)(53) wifi_base(0)
  5606.  
  5607. [ 4.488747] <0>.(0)[173:init]e2fsck: e2fsck 1.42.9 (28-Dec-2013)
  5608.  
  5609. [ 4.488747] <0>
  5610.  
  5611. [ 4.489752] <0>.(0)[173:init]e2fsck: Pass 1: Checking inodes, blocks, and sizes
  5612.  
  5613. [ 4.489752] <0>
  5614.  
  5615. [ 4.491016] <0>.(0)[173:init]e2fsck: Pass 2: Checking directory structure
  5616.  
  5617. [ 4.491016] <0>
  5618.  
  5619. [ 4.492085] <0>.(0)[173:init]e2fsck: Pass 3: Checking directory connectivity
  5620.  
  5621. [ 4.492085] <0>
  5622.  
  5623. [ 4.493185] <0>.(0)[173:init]e2fsck: Pass 4: Checking reference counts
  5624.  
  5625. [ 4.493185] <0>
  5626.  
  5627. [ 4.494221] <0>.(0)[173:init]e2fsck: Pass 5: Checking group summary information
  5628.  
  5629. [ 4.494221] <0>
  5630.  
  5631. [ 4.495355] <0>.(0)[173:init]e2fsck: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata: 493/2048 files (0.0% non-contiguous), 1885/8192 blocks
  5632.  
  5633. [ 4.495355] <0>
  5634.  
  5635. [ 4.497541] <0>.(0)[173:init]fs_mgr: __mount: target='/nvdata, encryptable=3
  5636.  
  5637. [ 4.498581] fs_mgr: __mount: 'nvdata' partition exists!
  5638.  
  5639. [ 4.503295] <0>.(0)[173:init]EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
  5640.  
  5641. [ 4.504847] <0>.(0)[173:init]fs_mgr: __mount(source=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/nvdata,target=/nvdata,type=ext4)=0
  5642.  
  5643. [ 4.509805] <0>.(0)[1:init]init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
  5644.  
  5645. [ 4.511532] <0>.(0)[1:init]init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
  5646.  
  5647. [ 4.513190] <0>.(0)[1:init]init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
  5648.  
  5649. [ 4.514896] <0>.(0)[1:init]init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
  5650.  
  5651. [ 4.516565] <0>.(0)[1:init]init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)
  5652.  
  5653. [ 4.518246] <0>.(0)[1:init]init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
  5654.  
  5655. [ 4.520074] <0>.(0)[1:init]init: (Parsing /system/etc/init/debuggerd64.rc took 0.00s.)
  5656.  
  5657. [ 4.521691] <0>.(0)[1:init]init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
  5658.  
  5659. [ 4.523398] <0>.(0)[1:init]init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
  5660.  
  5661. [ 4.525049] <0>.(0)[1:init]init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
  5662.  
  5663. [ 4.526882] <0>.(0)[1:init]init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)
  5664.  
  5665. [ 4.528672] <0>.(0)[1:init]init: (Parsing /system/etc/init/installd.rc took 0.00s.)
  5666.  
  5667. [ 4.530273] <0>.(0)[1:init]init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
  5668.  
  5669. [ 4.531864] <0>.(0)[1:init]init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
  5670.  
  5671. [ 4.535111] <0>.(0)[1:init]init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)
  5672.  
  5673. [ 4.536887] <0>.(0)[1:init]init: (Parsing /system/etc/init/logd.rc took 0.00s.)
  5674.  
  5675. [ 4.539318] <1>.(1)[1:init]init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
  5676.  
  5677. [ 4.539476] <1>.(0)[98:hps_main][HPS] (0020)(1)action end(99)(131)(0)(0) (4)(4)(4)(4)(1) (0)(0)(0) (0)(0)(0) (1)(131)(1)(0)(131) wifi_base(0)
  5678.  
  5679. [ 4.542664] init: ignored duplicate definition of service 'mediacodec'init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
  5680.  
  5681. [ 4.544805] <1>.(1)[1:init]init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
  5682.  
  5683. [ 4.546413] <1>.(1)[1:init]init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
  5684.  
  5685. [ 4.548023] <1>.(1)[1:init]init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
  5686.  
  5687. [ 4.549710] <1>.(1)[1:init]init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
  5688.  
  5689. [ 4.551207] <1>.(1)[1:init]init: (Parsing /system/etc/init/netd.rc took 0.00s.)
  5690.  
  5691. [ 4.552714] <1>.(1)[1:init]init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.)
  5692.  
  5693. [ 4.554260] <1>.(1)[1:init]init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
  5694.  
  5695. [ 4.555840] <1>.(1)[1:init]init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
  5696.  
  5697. [ 4.557440] <1>.(1)[1:init]init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
  5698.  
  5699. [ 4.559161] <1>.(1)[1:init]init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
  5700.  
  5701. [ 4.560763] <1>.(1)[1:init]init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
  5702.  
  5703. [ 4.562404] <1>.(1)[1:init]init: (Parsing /system/etc/init/vold.rc took 0.00s.)
  5704.  
  5705. [ 4.564914] <1>.(1)[1:init]init: (Parsing /vendor/etc/init/init.mal.rc took 0.00s.)
  5706.  
  5707. [ 4.566609] <1>.(1)[1:init]init: (Parsing /vendor/etc/init/init.wod.rc took 0.00s.)
  5708.  
  5709. [ 4.570132] <1>.(1)[1:init]init: Starting service 'exec 1 (/system/bin/tune2fs)'...
  5710.  
  5711. [ 4.588494] <0>-(0)[114:kworker/u8:2]do_connection_work: 39 callbacks suppressed
  5712.  
  5713. [ 4.589429] <0>.(0)[114:kworker/u8:2][MUSB]do_connection_work 431: is ready 0 is_host 0 power 0
  5714.  
  5715. [ 4.590508] <0>.(0)[114:kworker/u8:2][MUSB]do_connection_work 445: issue work after 50 ms
  5716.  
  5717. [ 4.631557] <1>.(1)[1:init]init: Service 'exec 1 (/system/bin/tune2fs)' (pid 207) exited with status 0
  5718.  
  5719. [ 4.632970] <1>.(1)[1:init]audit: type=1400 audit(1420070536.740:5): avc: denied { write } for pid=1 comm="init" name="trace_marker" dev="debugfs" ino=22 scontext=u:r:init:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
  5720.  
  5721. [ 4.635572] <1>.(1)[1:init]init: write_file: Unable to open '/sys/kernel/debug/tracing/trace_marker': Permission denied
  5722.  
  5723. [ 4.637032] <1>.(1)[1:init]BOOTPROF: 4637.024317:INIT:Mount_END
  5724.  
  5725. [ 4.638430] <0>.(0)[114:kworker/u8:2][MUSB]do_connection_work 431: is ready 0 is_host 0 power 0
  5726.  
  5727. [ 4.640776] <1>.(1)[1:init]BOOTPROF: 4640.766010:start teei_daemon (on fs)
  5728.  
  5729. [ 4.642889] <1>.(1)[1:init]init: Starting service 'teei_daemon'...
  5730.  
  5731. [ 4.644686] <1>.(1)[1:init]BOOTPROF: 4644.668163:start teei_daemon end (on fs)
  5732.  
  5733. [ 4.649124] <1>.(1)[1:init]init: Starting service 'logd'...
  5734.  
  5735. [ 4.649849] <0>.(0)[208:teei_daemon]audit: type=1400 audit(1420070536.760:6): avc: denied { getattr } for pid=208 comm="teei_daemon" path="/vendor" dev="rootfs" ino=6898 scontext=u:r:teei_daemon:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=0
  5736.  
  5737. [ 4.713532] <0>.(0)[209:logd]logd.auditd: start
  5738.  
  5739. [ 4.714209] <0>.(0)[209:logd]logd.klogd: 4695877307
  5740.  
  5741. [ 4.840984] <1>.(1)[98:hps_main][HPS] (0020)(2)action end(200)(202)(0)(2) (4)(4)(4)(4)(1) (348)(2)(0) (348)(2)(2) (1)(202)(3)(0)(202) wifi_base(0)
  5742.  
  5743. [ 4.934155] __sched_setscheduler 220:ut_tlog dl, rt sched_priority=1
  5744.  
  5745. [ 5.412751] <2>.(2)[158:bat_thread_kthr][BAT_thread]Cable out
  5746.  
  5747. [ 5.413509] <2>.(2)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  5748.  
  5749. [ 5.414420] <2>.(2)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  5750.  
  5751. [ 5.427760] <2>.(2)[158:bat_thread_kthr][FGADC] 0,5793,0,3949,74,72,72,1428,1428,185,0,0,1000,3776,1000,28,28,101,103
  5752.  
  5753. [ 5.429406] <2>.(2)[158:bat_thread_kthr]AvgVbat=(3800,3776),AvgI=(0,0),VChr=66,AvgT=(24,24),SOC=(72,72),UI_SOC=72,ZCV=3949,CHR_Type=0 bcct:0:0 I:7000 Ibat:-587
  5754.  
  5755. [ 5.431197] <2>.(2)[158:bat_thread_kthr]v=3776,i=0,t=24,soc=72,bcct:0:0 I:7000 Ibat:-587
  5756.  
  5757. [ 5.432210] <2>.(2)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  5758.  
  5759. [ 5.433159] <2>.(2)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  5760.  
  5761. [ 5.434099] <2>.(2)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  5762.  
  5763. [ 5.638411] <1>-(1)[114:kworker/u8:2]do_connection_work: 39 callbacks suppressed
  5764.  
  5765. [ 5.639345] <1>.(1)[114:kworker/u8:2][MUSB]do_connection_work 431: is ready 0 is_host 0 power 0
  5766.  
  5767. [ 5.640429] <1>.(1)[114:kworker/u8:2][MUSB]do_connection_work 445: issue work after 50 ms
  5768.  
  5769. [ 5.688381] <2>.(2)[114:kworker/u8:2][MUSB]do_connection_work 431: is ready 0 is_host 0 power 0
  5770.  
  5771. [ 6.441652] <2>.(2)[1:init]BOOTPROF: 6441.633783:INIT:post-fs
  5772.  
  5773. [ 6.449938] <1>.(1)[1:init]init: (Loading properties from /system/build.prop took 0.01s.)
  5774.  
  5775. [ 6.451146] <1>.(1)[1:init]init: can not load properties (null) from /vendor/build.prop
  5776.  
  5777. [ 6.452178] <1>.(1)[1:init]init: (Loading properties from /vendor/build.prop took 0.00s.)
  5778.  
  5779. [ 6.453258] <1>.(1)[1:init]init: can not load properties ro.* from /factory/factory.prop
  5780.  
  5781. [ 6.454289] <1>.(1)[1:init]init: (Loading properties from /factory/factory.prop took 0.00s.)
  5782.  
  5783. [ 6.457542] <0>.(0)[1:init]init: SELinux: Could not set context for /data: Read-only file system
  5784.  
  5785. [ 6.459494] <0>.(0)[1:init]init: Starting service 'debuggerd'...
  5786.  
  5787. [ 6.461731] <0>.(0)[1:init]init: Starting service 'debuggerd64'...
  5788.  
  5789. [ 6.464724] <0>.(0)[1:init]init: Starting service 'vold'...
  5790.  
  5791. [ 6.467925] <0>.(0)[1:init]init: Not bootcharting.
  5792.  
  5793. [ 6.555432] <1>.(1)[216:logd.auditd]type=1400 audit(1420070538.660:7): avc: denied { setsockcreate } for pid=223 comm="debuggerd64" scontext=u:r:debuggerd:s0 tcontext=u:r:debuggerd:s0 tclass=process permissive=0
  5794.  
  5795. [ 6.557117] <1>.(2)[223:debuggerd64]aed_ke_open:(aed1)10:58
  5796.  
  5797. [ 6.557386] <1>.(2)[223:debuggerd64]aed_ee_open:10:59
  5798.  
  5799. [ 6.559624] <1>.(1)[216:logd.auditd]type=1400 audit(1420070538.660:8): avc: denied { setsockcreate } for pid=223 comm="debuggerd64" scontext=u:r:debuggerd:s0 tcontext=u:r:debuggerd:s0 tclass=process permissive=0
  5800.  
  5801. [ 6.559879] <1>.(2)[223:debuggerd64]set aee mode = 4
  5802.  
  5803. [ 6.563132] <1>.(1)[216:logd.auditd]type=1400 audit(1420070538.660:9): avc: denied { setsockcreate } for pid=223 comm="debuggerd64" scontext=u:r:debuggerd:s0 tcontext=u:r:debuggerd:s0 tclass=process permissive=0
  5804.  
  5805. [ 6.566596] <1>.(1)[216:logd.auditd]type=1400 audit(1420070538.660:10): avc: denied { setsockcreate } for pid=223 comm="debuggerd64" scontext=u:r:debuggerd:s0 tcontext=u:r:debuggerd:s0 tclass=process permissive=0
  5806.  
  5807. [ 6.612106] <1>-(1)[219:teei_daemon][PTP] ptp_set_ptp_volt(): cur_temp = 40200, valid = 1
  5808.  
  5809. [ 6.621390] <1>.(1)[216:logd.auditd]type=1400 audit(1420070538.730:11): avc: denied { setsockcreate } for pid=222 comm="debuggerd" scontext=u:r:debuggerd:s0 tcontext=u:r:debuggerd:s0 tclass=process permissive=0
  5810.  
  5811. [ 6.623008] <1>.(2)[222:debuggerd]aed_ee_open:10:59
  5812.  
  5813. [ 6.623066] <1>.(2)[222:debuggerd]aed_ke_open:(aed1)10:58
  5814.  
  5815. [ 6.623316] <1>.(2)[222:debuggerd]aed_ee_open:10:59
  5816.  
  5817. [ 6.623861] <1>.(2)[222:debuggerd]set aee mode = 4
  5818.  
  5819. [ 6.626530] <1>.(1)[216:logd.auditd]type=1400 audit(1420070538.730:12): avc: denied { setsockcreate } for pid=222 comm="debuggerd" scontext=u:r:debuggerd:s0 tcontext=u:r:debuggerd:s0 tclass=process permissive=0
  5820.  
  5821. [ 6.629139] <1>.(1)[216:logd.auditd]type=1400 audit(1420070538.730:13): avc: denied { setsockcreate } for pid=222 comm="debuggerd" scontext=u:r:debuggerd:s0 tcontext=u:r:debuggerd:s0 tclass=process permissive=0
  5822.  
  5823. [ 6.631667] <1>.(1)[216:logd.auditd]type=1400 audit(1420070538.730:14): avc: denied { setsockcreate } for pid=222 comm="debuggerd" scontext=u:r:debuggerd:s0 tcontext=u:r:debuggerd:s0 tclass=process permissive=0
  5824.  
  5825. [ 6.645531] <1>.(1)[98:hps_main][HPS] (0080)(3)action end(287)(412)(0)(2) (4)(4)(4)(4)(1) (576)(18)(0) (1913)(17)(1) (0)(412)(18)(0)(412) wifi_base(0)
  5826.  
  5827. [ 6.688392] <0>-(0)[114:kworker/u8:2]do_connection_work: 39 callbacks suppressed
  5828.  
  5829. [ 6.689326] <0>.(0)[114:kworker/u8:2][MUSB]do_connection_work 431: is ready 0 is_host 0 power 0
  5830.  
  5831. [ 6.690407] <0>.(0)[114:kworker/u8:2][MUSB]do_connection_work 445: issue work after 50 ms
  5832.  
  5833. [ 6.738396] <0>.(0)[114:kworker/u8:2][MUSB]do_connection_work 431: is ready 0 is_host 0 power 0
  5834.  
  5835. [ 7.078438] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:NO-CDEV
  5836.  
  5837. [ 7.282141] <1>.(1)[231:vold]BOOTPROF: 7282.119477:vold:init_user0:START
  5838.  
  5839. [ 7.283912] <1>.(1)[231:vold]BOOTPROF: 7283.890939:vold:init_user0:END
  5840.  
  5841. [ 7.295725] <3>.(3)[1:init]init: SELinux: Could not set context for /data: Read-only file system
  5842.  
  5843. [ 7.298806] <3>.(3)[1:init]init: Starting service 'exec 2 (/system/bin/tzdatacheck)'...
  5844.  
  5845. [ 7.304026] <3>.(3)[233:debuggerd][KL_ENV]cann't find name=forceencrypt_config
  5846.  
  5847. [ 7.309362] <1>.(1)[233:debuggerd][KL_ENV]cann't find name=forceencrypt_config
  5848.  
  5849. [ 7.339006] <1>.(1)[1:init]init: Service 'exec 2 (/system/bin/tzdatacheck)' (pid 232) exited with status 0
  5850.  
  5851. [ 7.342814] <1>.(1)[1:init]BOOTPROF: 7342.795401:INIT:post-fs-data
  5852.  
  5853. [ 7.404924] <0>.(0)[1:init]init: write_file: Unable to open '/sys/class/misc/md32/md32_boot': No such file or directory
  5854.  
  5855. [ 7.433815] <0>.(0)[1:init]init: SELinux: Could not get canonical path for /data/misc/setkey restorecon: No such file or directory.
  5856.  
  5857. [ 7.446979] <0>.(0)[1:init]BOOTPROF: 7446.958478:start teei cfg (on post-fs-data)
  5858.  
  5859. [ 7.449112] <1>.(1)[98:hps_main]CPU3: shutdown
  5860.  
  5861. [ 7.450538] <0>.(0)[1:init]BOOTPROF: 7450.520709:start teei cfg end (on post-fs-data)
  5862.  
  5863. [ 7.450720] <0>.(1)[98:hps_main][HPS] (0200)(4)action end(350)(340)(0)(2) (4)(4)(4)(4)(1) (0)(0)(0) (1776)(8)(0) (0)(340)(8)(0)(340) wifi_base(0)
  5864.  
  5865. [ 7.453487] <0>.(0)[1:init]BOOTPROF: 7453.470555:start teei cfg end (set soter property)
  5866.  
  5867. [ 7.454709] <0>.(0)[1:init]BOOTPROF: 7454.696401:post-fs-data: on modem start
  5868.  
  5869. [ 7.468189] <0>.(0)[1:init]init: ro.hardware: mt6735.
  5870.  
  5871. [ 7.468996] <0>.(0)[1:init]init: can not load properties (null) from /data/local.prop
  5872.  
  5873. [ 7.470027] <0>.(0)[1:init]init: (Loading properties from /data/local.prop took 0.00s.)
  5874.  
  5875. [ 7.471089] <0>.(0)[1:init]init: Unable to open persistent property directory "/data/property": No such file or directory
  5876.  
  5877. [ 7.472542] <0>.(0)[1:init]init: service 'logd' still running, return directly
  5878.  
  5879. [ 7.473879] <0>.(0)[1:init]init: Starting service 'logd-reinit'...
  5880.  
  5881. [ 7.482269] <0>.(0)[1:init]init: service 'ueventd' still running, return directly
  5882.  
  5883. [ 7.483288] <0>.(0)[1:init]init: Starting service 'healthd'...
  5884.  
  5885. [ 7.485910] <0>.(0)[1:init]init: Starting service 'bootlogoupdater'...
  5886.  
  5887. [ 7.491367] <2>.(2)[235:healthd]binder: 235:235 binder_context_mgr_node is NULL
  5888.  
  5889. [ 7.492291] <2>.(2)[235:healthd]binder: 235:235 transaction failed 29189, size 0-0
  5890.  
  5891. [ 7.493238] <2>.(2)[235:healthd]binder: read put err 29189 to user 00000078efc47008, thread error 29189:29185
  5892.  
  5893. [ 7.493869] <2>.(0)[1:init]init: Starting service 'wmt_loader'...
  5894.  
  5895. [ 7.495942] <0>.(0)[1:init]init: Starting service 'wmt_launcher'...
  5896.  
  5897. [ 7.497869] <0>.(0)[1:init]init: service 'teei_daemon' still running, return directly
  5898.  
  5899. [ 7.502290] <0>.(0)[1:init]init: Starting service 'ccci_fsd'...
  5900.  
  5901. [ 7.505588] <0>.(0)[1:init]init: Starting service 'ccci_mdinit'...
  5902.  
  5903. [ 7.507498] <0>.(0)[1:init]init: cannot find '/vendor/bin/ccci_rpcd' (No such file or directory), disabling 'ccci_rpcd'
  5904.  
  5905. [ 7.519732] <0>.(0)[1:init]init: Starting service 'terservice'...
  5906.  
  5907. [ 7.522464] <0>.(0)[1:init]init: Starting service 'lmkd'...
  5908.  
  5909. [ 7.525074] <0>.(0)[1:init]init: Starting service 'servicemanager'...
  5910.  
  5911. [ 7.527815] <0>.(0)[1:init]init: Starting service 'surfaceflinger'...
  5912.  
  5913. [ 7.561660] <0>.(0)[1:init]init: service 'vold' still running, return directly
  5914.  
  5915. [ 7.565704] <0>.(0)[1:init]init: Starting service 'mal-daemon'...
  5916.  
  5917. [ 7.567759] <0>.(0)[1:init]BOOTPROF: 7567.744094:INIT:boot
  5918.  
  5919. [ 7.580003] <2>.(2)[210:logd.daemon]logd.daemon: reinit
  5920.  
  5921. [ 7.589387] <0>.(0)[210:logd.daemon]logd no log reader, set log level to INFO!
  5922.  
  5923. [ 7.617144] <1>.(1)[237:wmt_loader][WMT-DETECT][I]wmt_detect_open:open major 154 minor 0 (pid 237)
  5924.  
  5925. [ 7.620282] <2>.(2)[1:init]init: Service 'logd-reinit' (pid 234) exited with status 0
  5926.  
  5927. [ 7.637873] <2>.(2)[1:init]init: Unable to write persistent property to temp file /data/property/.temp.dU02NR: No such file or directory
  5928.  
  5929. [ 7.648512] <1>.(1)[237:wmt_loader][WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191034),arg(8)
  5930.  
  5931. [ 7.649661] <1>.(1)[237:wmt_loader][WMT-DETECT][I]wmt_detect_ext_chip_pwr_on:combo chip is not supported
  5932.  
  5933. [ 7.651022] <1>.(1)[237:wmt_loader][WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191037),arg(0)
  5934.  
  5935. [ 7.651263] <1>-(3)[0:swapper/3]CPU3: Booted secondary processor
  5936.  
  5937. [ 7.651275] <1>-(3)[0:swapper/3]Detected VIPT I-cache on CPU3
  5938.  
  5939. [ 7.652201] <1>.(0)[98:hps_main][HPS] (0020)(3)action end(300)(1241)(0)(11) (4)(4)(4)(4)(1) (286)(1)(1) (286)(1)(1) (1)(1241)(2)(0)(1241) wifi_base(0)
  5940.  
  5941. [ 7.659806] <2>.(2)[1:init]init: Starting service 'console'...
  5942.  
  5943. [ 7.662919] <2>.(2)[1:init]init: Starting service 'emsvr_user'...
  5944.  
  5945. [ 7.679541] <2>.(2)[1:init]init: Unable to write persistent property to temp file /data/property/.temp.yjiYEH: No such file or directory
  5946.  
  5947. [ 7.681472] <2>.(2)[1:init]Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
  5948.  
  5949. [ 7.681483] <2>.(3)[237:wmt_loader][WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (1074034433),arg(821)
  5950.  
  5951. [ 7.681496] <2>.(3)[237:wmt_loader]set current consys chipid (0x335)
  5952.  
  5953. [ 7.681505] <2>.(3)[237:wmt_loader][WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191035),arg(26421)
  5954.  
  5955. [ 7.681611] <2>.(3)[237:wmt_loader][SDIO-DETECT][I]sdio_detect_exit:sdio_unregister_driver
  5956.  
  5957. [ 7.681620] <2>.(3)[237:wmt_loader][WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191036),arg(26421)
  5958.  
  5959. [ 7.681627] <2>.(3)[237:wmt_loader][WMT-MOD-INIT][I]do_common_drv_init:start to do common driver init, chipid:0x00006735
  5960.  
  5961. [ 7.681634] <2>.(3)[237:wmt_loader][HIF-SDIO][I]hif_sdio_init:start!
  5962.  
  5963. [ 7.681727] <2>.(3)[237:wmt_loader][HIF-SDIO][I]hif_sdio_deep_sleep_info_dmp:p_ds_info: 0x00e59350, chipid:0x6630, reg_offset:0xf1, value:0x1
  5964.  
  5965. [ 7.681735] <2>.(3)[237:wmt_loader][HIF-SDIO][I]hif_sdio_deep_sleep_info_dmp:ctl_info[0]--ctx:0x00000000, func_num:0, act_flag:0, en_flag:0
  5966.  
  5967. [ 7.681743] <2>.(3)[237:wmt_loader][HIF-SDIO][I]hif_sdio_deep_sleep_info_dmp:ctl_info[1]--ctx:0x00000000, func_num:0, act_flag:0, en_flag:0
  5968.  
  5969. [ 7.681751] <2>.(3)[237:wmt_loader][HIF-SDIO][I]hif_sdio_deep_sleep_info_dmp:p_ds_info: 0x00e59398, chipid:0x6632, reg_offset:0xf1, value:0x1
  5970.  
  5971. [ 7.681759] <2>.(3)[237:wmt_loader][HIF-SDIO][I]hif_sdio_deep_sleep_info_dmp:ctl_info[0]--ctx:0x00000000, func_num:0, act_flag:0, en_flag:0
  5972.  
  5973. [ 7.681768] <2>.(3)[237:wmt_loader][HIF-SDIO][I]hif_sdio_deep_sleep_info_dmp:ctl_info[1]--ctx:0x00000000, func_num:0, act_flag:0, en_flag:0
  5974.  
  5975. [ 7.681775] <2>.(3)[237:wmt_loader][HIF-SDIO][I]hif_sdio_deep_sleep_info_dmp:p_ds_info: 0x00e593e0, chipid:0x0, reg_offset:0x0, value:0x0
  5976.  
  5977. [ 7.681783] <2>.(3)[237:wmt_loader][HIF-SDIO][I]hif_sdio_deep_sleep_info_dmp:ctl_info[0]--ctx:0x00000000, func_num:0, act_flag:0, en_flag:0
  5978.  
  5979. [ 7.681791] <2>.(3)[237:wmt_loader][HIF-SDIO][I]hif_sdio_deep_sleep_info_dmp:ctl_info[1]--ctx:0x00000000, func_num:0, act_flag:0, en_flag:0
  5980.  
  5981. [ 7.681799] <2>.(3)[237:wmt_loader][HIF-SDIO][I]WMT_init:WMT Version= Consys WMT Driver - v1.0 DATE=2013/01/20
  5982.  
  5983. [ 7.701124] <2>.(1)[237:wmt_loader][STP] mtk_wcn_stp_dbg_enable:[I] STP dbg mode is turned on
  5984.  
  5985. [ 7.701142] <2>.(1)[237:wmt_loader][HIF-SDIO][I]WMT_init:driver(major 190) installed
  5986.  
  5987. [ 7.702473] <2>.(1)[237:wmt_loader][WMT-CONF][I]wmt_conf_read_file:get full file name(/vendor/firmware/WMT_SOC.cfg) buf(0xffffff8012c4d000) size(80)
  5988.  
  5989. [ 7.729293] <3>.(3)[239:ccci_fsd][ccci1/chr]port ccci_fs open with flag 20002 by ccci_fsd
  5990.  
  5991. [ 7.738417] <3>-(3)[114:kworker/u8:2]do_connection_work: 39 callbacks suppressed
  5992.  
  5993. [ 7.739372] <3>.(3)[114:kworker/u8:2][MUSB]do_connection_work 431: is ready 0 is_host 0 power 0
  5994.  
  5995. [ 7.740483] <3>.(3)[114:kworker/u8:2][MUSB]do_connection_work 445: issue work after 50 ms
  5996.  
  5997. [ 7.744371] <2>.(2)[1:init]init: Service 'terservice' (pid 241) exited with status 0
  5998.  
  5999. [ 7.749973] <2>.(2)[1:init][g_android][USB]enable_store: device_attr->attr.name: enable
  6000.  
  6001. [ 7.751933] <2>.(2)[1:init][g_android]android_usb: already disabled
  6002.  
  6003. [ 7.755036] <2>.(2)[1:init][g_android][USB]functions_store: name = mtp
  6004.  
  6005. [ 7.756145] <2>.(2)[1:init][g_android][USB]functions_store: name = adb
  6006.  
  6007. [ 7.757626] <2>.(2)[1:init][g_android][USB]enable_store: device_attr->attr.name: enable
  6008.  
  6009. [ 7.758737] <2>.(2)[1:init][g_android][USB]enable_store: enable 0->1 case, device_desc.idVendor = 0xe8d, device_desc.idProduct = 0x201d
  6010.  
  6011. [ 7.760859] <2>.(2)[1:init]init: Starting service 'adbd'...
  6012.  
  6013. [ 7.771462] <2>.(2)[1:init][g_android][USB]log_store, <mtp,adb>, n:7, log_buf_idx:8
  6014.  
  6015. [ 7.775797] <2>.(2)[1:init]init: service 'surfaceflinger' still running, return directly
  6016.  
  6017. [ 7.784270] <3>.(3)[252:usb ffs open]read descriptors
  6018.  
  6019. [ 7.784728] <3>.(2)[1:init]init: Starting service 'exec 3 (/system/bin/vdc)'...
  6020.  
  6021. [ 7.787343] <3>.(3)[252:usb ffs open]skip os descriptor, os_descs_count:1, len:35 all to 0
  6022.  
  6023. [ 7.788542] <3>.(3)[252:usb ffs open]read strings
  6024.  
  6025. [ 7.788974] <3>.(2)[114:kworker/u8:2][MUSB]do_connection_work 431: is ready 0 is_host 0 power 0
  6026.  
  6027. [ 7.790265] <3>.(3)[252:usb ffs open][g_android][USB]bind_config function 'mtp'/ffffffc000e711f8
  6028.  
  6029. [ 7.791363] <3>.(3)[252:usb ffs open]mtp_bind_config
  6030.  
  6031. [ 7.792023] <3>.(3)[252:usb ffs open][g_android][USB]bind_config function 'ffs'/ffffffc000e70338
  6032.  
  6033. [ 7.793152] <3>.(3)[252:usb ffs open]android_usb gadget: cfg 1/ffffffc000e70258 speeds: super high full
  6034.  
  6035. [ 7.794325] <3>.(3)[252:usb ffs open][MUSB]musb_gadget_pullup 2129: is_on=1, softconnect=0 ++
  6036.  
  6037. [ 7.795406] <3>.(3)[252:usb ffs open][MUSB]musb_gadget_pullup 2139: is_on=1, softconnect=0 ++
  6038.  
  6039. [ 7.796484] <3>.(3)[252:usb ffs open][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  6040.  
  6041. [ 7.797711] <3>.(3)[252:usb ffs open][MUSB]set_usb_rdy 57: set usb_rdy, wake up bat
  6042.  
  6043. [ 7.800296] <3>.(3)[158:bat_thread_kthr][BATTERY] Charger plug in/out, Call battery_meter_reset. (72)
  6044.  
  6045. [ 7.801466] <3>.(3)[158:bat_thread_kthr][BAT_thread]Cable out
  6046.  
  6047. [ 7.802204] <3>.(3)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  6048.  
  6049. [ 7.803111] <3>.(3)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  6050.  
  6051. [ 7.804439] <3>.(3)[252:usb ffs open][MUSB]usb_cable_connected 610: issue connect_rescue_work on is_ready begin, delay_time:2000 ms
  6052.  
  6053. [ 7.804642] <3>.(1)[237:wmt_loader][CONN-MD-DFT][W]conn_md_add_user:uid (0x80000003) is added to user list successfully
  6054.  
  6055. [ 7.804701] <3>.(1)[237:wmt_loader][HIF-SDIO][I]WMT_init:wmt_dev register thermal cb
  6056.  
  6057. [ 7.804737] <3>.(1)[237:wmt_loader][HIF-SDIO][I]WMT_init:wmt register fb_notifier OK!
  6058.  
  6059. [ 7.804743] <3>.(1)[237:wmt_loader][HIF-SDIO][I]WMT_init:success
  6060.  
  6061. [ 7.804763] <3>.(1)[237:wmt_loader][UART] stp_uart_fifo_init: stp_uart_fifo_init() success.
  6062.  
  6063. [ 7.804775] <3>.(1)[237:wmt_loader][STP SDIO][I]stp_sdio_host_info_op:memory allocate for g_stp_sdio_host_info.pkt_buf.tx_buf succeed!
  6064.  
  6065. [ 7.804782] <3>.(1)[237:wmt_loader][STP SDIO][I]stp_sdio_host_info_op:memory allocate for g_stp_sdio_host_info.pkt_buf.rx_buf succeed!
  6066.  
  6067. [ 7.804788] <3>.(1)[237:wmt_loader][STP SDIO][I]stp_sdio_init:cltinfo func table size:8
  6068.  
  6069. [ 7.804795] <3>.(1)[237:wmt_loader][STP SDIO][I]stp_sdio_init:manf_id:0x37a, card_id:0x18b, func_num:1, blk_size:512
  6070.  
  6071. [ 7.804801] <3>.(1)[237:wmt_loader][STP SDIO][I]stp_sdio_init:manf_id:0x37a, card_id:0x18c, func_num:1, blk_size:512
  6072.  
  6073. [ 7.804808] <3>.(1)[237:wmt_loader][STP SDIO][I]stp_sdio_init:manf_id:0x37a, card_id:0x6619, func_num:1, blk_size:512
  6074.  
  6075. [ 7.804815] <3>.(1)[237:wmt_loader][STP SDIO][I]stp_sdio_init:manf_id:0x37a, card_id:0x20b, func_num:1, blk_size:512
  6076.  
  6077. [ 7.804821] <3>.(1)[237:wmt_loader][STP SDIO][I]stp_sdio_init:manf_id:0x37a, card_id:0x20c, func_num:1, blk_size:512
  6078.  
  6079. [ 7.804828] <3>.(1)[237:wmt_loader][STP SDIO][I]stp_sdio_init:manf_id:0x37a, card_id:0x6628, func_num:2, blk_size:512
  6080.  
  6081. [ 7.804834] <3>.(1)[237:wmt_loader][STP SDIO][I]stp_sdio_init:manf_id:0x37a, card_id:0x6630, func_num:2, blk_size:512
  6082.  
  6083. [ 7.804840] <3>.(1)[237:wmt_loader][STP SDIO][I]stp_sdio_init:manf_id:0x37a, card_id:0x6632, func_num:2, blk_size:512
  6084.  
  6085. [ 7.804933] <3>.(1)[237:wmt_loader][STP SDIO][I]stp_sdio_init:blk_size(512), tx_buf_cnt(16), fifo tx(2080) rx(2304), buf tx(2560) rx(2560)
  6086.  
  6087. [ 7.804940] <3>.(1)[237:wmt_loader][WMT-MOD-INIT][I]do_common_drv_init:common driver init finish:0
  6088.  
  6089. [ 7.804946] <3>.(1)[237:wmt_loader][BT-MOD-INIT][I]do_bluetooth_drv_init:start to do bluetooth driver init
  6090.  
  6091. [ 7.805129] <3>.(1)[237:wmt_loader][MTK-BT] BT_init: mtk_stp_BT_chrdev driver(major 192) installed
  6092.  
  6093. [ 7.805135] <3>.(1)[237:wmt_loader][BT-MOD-INIT][I]do_bluetooth_drv_init:finish bluetooth driver init, i_ret:0
  6094.  
  6095. [ 7.805141] <3>.(1)[237:wmt_loader][GPS-MOD-INIT][I]do_gps_drv_init:start to do gps driver init
  6096.  
  6097. [ 7.805262] <3>.(1)[237:wmt_loader]mtk_stp_GPS_chrdev driver(major 191) installed.
  6098.  
  6099. [ 7.805272] <3>.(1)[237:wmt_loader][GPS-MOD-INIT][I]do_gps_drv_init:finish gps driver init, i_ret:0
  6100.  
  6101. [ 7.805278] <3>.(1)[237:wmt_loader][FM-MOD-INIT][I]do_fm_drv_init:start to do fm module init
  6102.  
  6103. [ 7.805283] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]fm_env_setup
  6104.  
  6105. [ 7.805296] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]fm ops registered
  6106.  
  6107. [ 7.805308] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]fm locks created
  6108.  
  6109. [ 7.805314] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]fm timer created
  6110.  
  6111. [ 7.805324] <3>.(1)[237:wmt_loader][FM_NTC | LINK]fm link setup
  6112.  
  6113. [ 7.805347] <3>.(1)[237:wmt_loader][FM_NTC | LINK]cmd_fifo created
  6114.  
  6115. [ 7.805367] <3>.(1)[237:wmt_loader][FM_NTC | LINK]evt_fifo created
  6116.  
  6117. [ 7.806047] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]mt_fm_probe
  6118.  
  6119. [ 7.815439] <3>.(1)[158:bat_thread_kthr]AvgVbat=(3799,3761),AvgI=(0,0),VChr=66,AvgT=(24,24),SOC=(72,72),UI_SOC=72,ZCV=3949,CHR_Type=0 bcct:0:0 I:7000 Ibat:-648
  6120.  
  6121. [ 7.815456] <3>.(1)[158:bat_thread_kthr]v=3761,i=0,t=24,soc=72,bcct:0:0 I:7000 Ibat:-648
  6122.  
  6123. [ 7.815466] <3>.(1)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  6124.  
  6125. [ 7.815563] <3>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  6126.  
  6127. [ 7.815569] <3>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  6128.  
  6129. [ 7.828944] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]chipid:0x6627, chip type:1
  6130.  
  6131. [ 7.828951] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]FM default config
  6132.  
  6133. [ 7.828957] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]0x6627 configs:
  6134.  
  6135. [ 7.828962] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->rssi_l: -296
  6136.  
  6137. [ 7.828966] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->rssi_s: -296
  6138.  
  6139. [ 7.828972] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->pamd_th: -12
  6140.  
  6141. [ 7.828976] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->mr_th: -67
  6142.  
  6143. [ 7.828982] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->atdc_th: 3496
  6144.  
  6145. [ 7.828986] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->prx_th: 64
  6146.  
  6147. [ 7.828991] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->smg_th: 16421
  6148.  
  6149. [ 7.828995] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->de_emphasis: 0
  6150.  
  6151. [ 7.829000] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->osc_freq: 0
  6152.  
  6153. [ 7.829005] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->desense_rssi_th: -240
  6154.  
  6155. [ 7.829010] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]TX->scan_hole_low: 0
  6156.  
  6157. [ 7.829015] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]TX->scan_hole_high: 0
  6158.  
  6159. [ 7.829020] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]TX->power_level: 0
  6160.  
  6161. [ 7.829027] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]aud path[1]I2S state[1]mode[0]rate[0]pad[0]
  6162.  
  6163. [ 7.829116] <3>.(1)[237:wmt_loader](NULL device *): Direct firmware load for fm_cust.cfg failed with error -2
  6164.  
  6165. [ 7.829122] <3>.(1)[237:wmt_loader](NULL device *): Falling back to user helper
  6166.  
  6167. [ 7.863222]
  6168. [ 7.872370] <3>.(3)[252:usb ffs open][MUSB]usb_cable_connected 612: issue connect_rescue_work on is_ready end, delay_time:2000 ms
  6169.  
  6170. [ 7.873426] <3>.(2)[1:init]init: Service 'exec 3 (/system/bin/vdc)' (pid 253) exited with status 0
  6171.  
  6172. fih6737m_65_n1:/ $ [ 7.877565] <3>.(3)[114:kworker/u8:2][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  6173.  
  6174. [ 7.878855] <3>.(3)[114:kworker/u8:2][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  6175.  
  6176. [ 7.880225] <3>-(3)[114:kworker/u8:2][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  6177.  
  6178. [ 7.881653] <3>-(3)[114:kworker/u8:2][MUSB]do_connection_work 463: in uart mode, return
  6179.  
  6180. [ 7.882684] <3>.(3)[252:usb ffs open][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  6181.  
  6182. [ 7.883977] <3>-(3)[252:usb ffs open][MUSB]musb_pullup 2072: MUSB: gadget pull up 1 start, musb->power:0
  6183.  
  6184. [ 7.884944] <3>.(1)[237:wmt_loader][FM_NTC | CHIP]load firmware "fm_cust.cfg" ok
  6185.  
  6186. [ 7.884953] <3>.(1)[237:wmt_loader][FM_NTC | CHIP]Copy file data(ffffff801306a000) size(304)
  6187.  
  6188. [ 7.884995] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]FM cust config
  6189.  
  6190. [ 7.885001] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]0x6627 configs:
  6191.  
  6192. [ 7.885006] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->rssi_l: -296
  6193.  
  6194. [ 7.885011] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->rssi_s: -296
  6195.  
  6196. [ 7.885016] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->pamd_th: -12
  6197.  
  6198. [ 7.885021] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->mr_th: -67
  6199.  
  6200. [ 7.885026] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->atdc_th: 3496
  6201.  
  6202. [ 7.885031] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->prx_th: 64
  6203.  
  6204. [ 7.885036] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->smg_th: 16421
  6205.  
  6206. [ 7.885040] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->de_emphasis: 0
  6207.  
  6208. [ 7.885045] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->osc_freq: 0
  6209.  
  6210. [ 7.885050] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]RX->desense_rssi_th: -240
  6211.  
  6212. [ 7.885054] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]TX->scan_hole_low: 0
  6213.  
  6214. [ 7.885059] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]TX->scan_hole_high: 0
  6215.  
  6216. [ 7.885064] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]TX->power_level: 0
  6217.  
  6218. [ 7.885071] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]aud path[1]I2S state[1]mode[0]rate[0]pad[0]
  6219.  
  6220. [ 7.885082] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]alloc fm:224:0
  6221.  
  6222. [ 7.885282] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]create_proc_entry success
  6223.  
  6224. [ 7.885308] <3>.(1)[237:wmt_loader]BOOTPROF: 7885.301633:probe: probe=platform_drv_probe drv=fm(ffffffc000e5ceb0) 79.247615ms
  6225.  
  6226. [ 7.885383] <3>.(1)[237:wmt_loader][FM_NTC | MAIN]6. fm platform driver registered
  6227.  
  6228. [ 7.885389] <3>.(1)[237:wmt_loader][FM-MOD-INIT][I]do_fm_drv_init:finish fm module init
  6229.  
  6230. [ 7.885395] <3>.(1)[237:wmt_loader][WLAN-MOD-INIT][I]do_wlan_drv_init:start to do wlan module init 0x6735
  6231.  
  6232. [ 7.885529] <3>.(1)[237:wmt_loader][WLAN-MOD-INIT][I]do_wlan_drv_init:WMT-WIFI char dev init, ret:0
  6233.  
  6234. [ 7.886564] <3>.(1)[237:wmt_loader][HIF-SDIO][I]mtk_wcn_wmt_wlan_reg:wmt wlan cb register
  6235.  
  6236. [ 7.887151] <3>.(1)[237:wmt_loader][WLAN-MOD-INIT][I]do_wlan_drv_init:WLAN-GEN2 driver init, ret:0
  6237.  
  6238. [ 7.887158] <3>.(1)[237:wmt_loader][WLAN-MOD-INIT][I]do_wlan_drv_init:finish wlan module init
  6239.  
  6240. [ 7.887399] <3>.(1)[237:wmt_loader][WMT-DETECT][I]wmt_detect_close:close major 154 minor 0 (pid 237)
  6241.  
  6242. [ 7.894720] <3>.(2)[1:init]init: service 'emsvr_user' still running, return directly
  6243.  
  6244. [ 7.912501] <3>-(3)[252:usb ffs open][MUSB]musb_pullup 2092: MUSB: gadget pull up 1 end
  6245.  
  6246. [ 7.957869] <0>.(0)[238:wmt_launcher][HIF-SDIO][I]WMT_open:major 190 minor 0 (pid 238)
  6247.  
  6248. [ 7.958929] <0>.(0)[238:wmt_launcher][HIF-SDIO][I]WMT_open:1st call
  6249.  
  6250. [ 7.960092] <0>.(0)[238:wmt_launcher][HIF-SDIO][I]wmt_lib_set_hif:new hifType:2, fcCtrl:0, baud:0, fm:2
  6251.  
  6252. [ 7.962317] <2>.(2)[250:mtk_wmtd][WMT-CORE][E]opfunc_hif_conf(1017):WMT-CORE: WMT HIF info added
  6253.  
  6254. [ 8.123695] <2>.(2)[1:init][g_android][USB]enable_store: device_attr->attr.name: enable
  6255.  
  6256. [ 8.124725] <2>.(2)[1:init][g_android][USB]enable_store: enable 1->0 case, device_desc.idVendor = 0xe8d, device_desc.idProduct = 0x201d
  6257.  
  6258. [ 8.126263] <2>.(2)[1:init][MUSB]musb_gadget_pullup 2129: is_on=0, softconnect=1 ++
  6259.  
  6260. [ 8.127235] <2>.(2)[1:init][MUSB]musb_gadget_pullup 2139: is_on=0, softconnect=1 ++
  6261.  
  6262. [ 8.128204] <2>.(2)[1:init][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  6263.  
  6264. [ 8.129363] <2>.(2)[1:init][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  6265.  
  6266. [ 8.130551] <2>-(2)[1:init][MUSB]musb_pullup 2072: MUSB: gadget pull up 0 start, musb->power:0
  6267.  
  6268. [ 8.131622] <2>-(2)[1:init][MUSB]musb_pullup 2092: MUSB: gadget pull up 0 end
  6269.  
  6270. [ 8.132515] <2>.(2)[1:init]android_usb gadget: unbind function 'mtp'/ffffffc076a09000
  6271.  
  6272. [ 8.133527] <2>.(2)[1:init]android_usb gadget: unbind function 'Function FS Gadget'/ffffffc07592ee38
  6273.  
  6274. [ 8.134673] <2>.(2)[1:init]android_usb gadget: unbind config 'android'/ffffffc000e70258
  6275.  
  6276. [ 8.135671] <2>.(2)[1:init][g_android][USB]disable function 'mtp'/ffffffc000e711f8
  6277.  
  6278. [ 8.136611] <2>.(2)[1:init][g_android][USB]disable function 'ffs'/ffffffc000e70338
  6279.  
  6280. [ 8.137975] <2>.(2)[1:init]init: Service 'wmt_loader' (pid 237) exited with status 0
  6281.  
  6282. [ 8.140871] <0>.(0)[1:init][g_android][USB]functions_store: name = mtp
  6283.  
  6284. [ 8.141713] <0>.(0)[1:init][g_android][USB]functions_store: name = adb
  6285.  
  6286. [ 8.143321] <0>.(0)[1:init][g_android][USB]enable_store: device_attr->attr.name: enable
  6287.  
  6288. [ 8.144458] <0>.(0)[1:init][g_android][USB]bind_config function 'mtp'/ffffffc000e711f8
  6289.  
  6290. [ 8.145493] <0>.(0)[1:init]mtp_bind_config
  6291.  
  6292. [ 8.146073] <0>.(0)[1:init][g_android][USB]bind_config function 'ffs'/ffffffc000e70338
  6293.  
  6294. [ 8.147095] <0>.(0)[1:init]android_usb gadget: cfg 1/ffffffc000e70258 speeds: super high full
  6295.  
  6296. [ 8.148176] <0>.(0)[1:init][MUSB]musb_gadget_pullup 2129: is_on=1, softconnect=0 ++
  6297.  
  6298. [ 8.149306] <0>.(0)[1:init][MUSB]musb_gadget_pullup 2139: is_on=1, softconnect=0 ++
  6299.  
  6300. [ 8.150292] <0>.(0)[1:init][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  6301.  
  6302. [ 8.151477] <0>.(0)[1:init][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  6303.  
  6304. [ 8.152664] <0>-(0)[1:init][MUSB]musb_pullup 2072: MUSB: gadget pull up 1 start, musb->power:0
  6305.  
  6306. [ 8.153756] <0>-(0)[1:init][MUSB]musb_pullup 2092: MUSB: gadget pull up 1 end
  6307.  
  6308. [ 8.154760] <0>.(0)[1:init][g_android][USB]enable_store: enable 0->1 case, device_desc.idVendor = 0xe8d, device_desc.idProduct = 0x201d
  6309.  
  6310. [ 8.157262] <0>.(0)[238:wmt_launcher][STP] mtk_wcn_stp_coredump_flag_ctrl:[I] enable coredump function.
  6311.  
  6312. [ 8.158521] <0>.(0)[238:wmt_launcher][STP] mtk_wcn_stp_set_wmt_last_close:[I] set wmt_last_close flag (0)
  6313.  
  6314. [ 8.161473] <0>.(0)[1:init]init: service 'adbd' still running, return directly
  6315.  
  6316. [ 8.162438] <2>.(2)[261:pwr_on_conn][HIF-SDIO][I]mtk_wcn_wmt_func_ctrl:wmt-exp: OPID(3) type(9) start
  6317.  
  6318. [ 8.163601] <2>.(0)[1:init][g_android][USB]log_store, <mtp,adb>, n:7, log_buf_idx:16
  6319.  
  6320. [ 8.164670] <2>.(2)[261:pwr_on_conn][STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
  6321.  
  6322. [ 8.165994] <2>.(2)[250:mtk_wmtd][WMT-CONSYS-HW][W]mtk_wcn_consys_hw_reg_ctrl:CONSYS-HW-REG-CTRL(0x00000001),start
  6323.  
  6324. [ 8.167328] <2>.(2)[250:mtk_wmtd]vcn18: operation not allowed
  6325.  
  6326. [ 8.169865] <2>.(2)[250:mtk_wmtd]vcn28: operation not allowed
  6327.  
  6328. [ 8.171086] <1>.(1)[250:mtk_wmtd][Power/clkmgr] [conn_power_on]
  6329.  
  6330. [ 8.172123] [WMT-CONSYS-HW][E]mtk_wcn_consys_hw_reg_ctrl(477):Read CONSYS chipId(0x00000000)
  6331.  
  6332. [ 8.174001] <0>.(0)[1:init]BOOTPROF: 8173.971249:INIT:vold.decrypt=trigger_shutdown_framework
  6333.  
  6334. [ 8.176465] <0>.(0)[1:init]init: Starting service 'stop_modem'...
  6335.  
  6336. [ 8.178642] <0>.(0)[1:init]init: Starting service 'swapoff_action'...
  6337.  
  6338. [ 8.198784] AEE_MONITOR_SET[status]: 0x1
  6339.  
  6340. [ 8.201130] <0>.(0)[1:init]init: Starting service 'stp_dump'...
  6341.  
  6342. [ 8.205042] <3>.(3)[1:init]BOOTPROF: 8205.015480:INIT:vold.decrypt=trigger_post_fs_data
  6343.  
  6344. [ 8.228436] <0>.(0)[250:mtk_wmtd][WMT-CONSYS-HW][W]mtk_wcn_consys_hw_reg_ctrl:CONSYS-HW-REG-CTRL(0x00000001),finish
  6345.  
  6346. [ 8.230268] <0>.(0)[250:mtk_wmtd]MTK-BTIF-EXP[I]mtk_wcn_btif_open:btif_open succeed
  6347.  
  6348. [ 8.231250] <0>.(0)[250:mtk_wmtd][STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
  6349.  
  6350. [ 8.232537] <0>.(0)[250:mtk_wmtd][STP] mtk_wcn_stp_ready:[I] set ready (0)
  6351.  
  6352. [ 8.233402] <0>.(0)[250:mtk_wmtd][STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
  6353.  
  6354. [ 8.234691] <0>.(0)[250:mtk_wmtd][STP] mtk_wcn_stp_set_wmt_evt_err_trg_assert:[I] set evt err tigger assert flag to 0
  6355.  
  6356. [ 8.241724] <1>.(1)[250:mtk_wmtd][WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x335)
  6357.  
  6358. [ 8.246697] <0>.(0)[250:mtk_wmtd][WMT-IC][W]mtk_wcn_soc_ver_check:0x335: ic info: SOC_CONSYS.E1 (0x8a00/0x8a00, WMTHWVER:0, patch_ext:_e1)
  6359.  
  6360. [ 8.248472] <0>.(0)[250:mtk_wmtd][WMT-CORE][I]wmt_core_hw_check:chip id(0x335) ver_check ok
  6361.  
  6362. [ 8.253012] <2>.(2)[250:mtk_wmtd][STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
  6363.  
  6364. [ 8.254373] <2>.(2)[250:mtk_wmtd][STP] mtk_wcn_stp_set_wmt_evt_err_trg_assert:[I] set evt err tigger assert flag to 0
  6365.  
  6366. [ 8.341051] <0>.(0)[1:init]init: Service 'swapoff_action' (pid 263) exited with status 127
  6367.  
  6368. [ 8.342824] <0>.(0)[1:init]init: Unable to write persistent property to temp file /data/property/.temp.TN6reH: No such file or directory
  6369.  
  6370. [ 8.349069] <0>.(0)[1:init]init: service 'debuggerd' still running, return directly
  6371.  
  6372. [ 8.350385] <0>.(0)[1:init]init: Unable to write persistent property to temp file /data/property/.temp.Y8oy6X: No such file or directory
  6373.  
  6374. [ 8.352594] <0>.(0)[250:mtk_wmtd][HIF-SDIO][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
  6375.  
  6376. [ 8.353818] <0>.(0)[1:init]init: service 'debuggerd64' still running, return directly
  6377.  
  6378. [ 8.355258] <0>.(0)[1:init]init: Service 'stop_modem' (pid 262) exited with status 255
  6379.  
  6380. [ 8.356604] <3>.(3)[250:mtk_wmtd][WMT-IC][I]mtk_wcn_soc_patch_dwn:[Patch]BuiltTime = 20170119092644a, HVer = 0x8a00, SVer = 0x8a00, PhVer = 0x00fe,Platform = 1636
  6381.  
  6382. [ 8.356708] <3>.(0)[1:init]init: service 'vold' still running, return directly
  6383.  
  6384. [ 8.358870] <3>.(0)[1:init]init: Not bootcharting.
  6385.  
  6386. [ 8.439035] <0>.(0)[244:surfaceflinger]M4Uconfig_port:DISP_OVL0_PORT0,v1,s0
  6387.  
  6388. [ 8.458468] <1>.(1)[250:mtk_wmtd][WMT-IC][W]mtk_wcn_soc_patch_dwn:wmt_core: patch dwn:0 frag(63, 776) ok
  6389.  
  6390. [ 8.465721] <2>.(2)[231:vold]BOOTPROF: 8465.689250:vold:init_user0:START
  6391.  
  6392. [ 8.469635] <0>.(0)[231:vold]BOOTPROF: 8469.611250:vold:init_user0:END
  6393.  
  6394. [ 8.474004] <3>.(3)[1:init]init: Service 'bootlogoupdater' (pid 236) exited with status 0
  6395.  
  6396. [ 8.500644] <3>.(3)[235:healthd]healthd: BatteryCurrentNowPath not found
  6397.  
  6398. [ 8.501631] <2>.(2)[235:healthd]healthd: BatteryFullChargePath not found
  6399.  
  6400. [ 8.502520] <2>.(2)[235:healthd]healthd: BatteryCycleCountPath not found
  6401.  
  6402. [ 8.535227] <0>.(0)[1:init]init: Starting service 'exec 4 (/system/bin/tzdatacheck)'...
  6403.  
  6404. [ 8.587146] <1>.(1)[1:init]init: Service 'exec 4 (/system/bin/tzdatacheck)' (pid 291) exited with status 0
  6405.  
  6406. [ 8.591869] <0>.(0)[1:init]BOOTPROF: 8591.851096:INIT:post-fs-data
  6407.  
  6408. [ 8.600020] <1>.(1)[1:init]init: write_file: Unable to open '/sys/class/misc/md32/md32_boot': No such file or directory
  6409.  
  6410. [ 8.641542] <3>.(3)[250:mtk_wmtd][WMT-IC][W]mtk_wcn_soc_patch_dwn:wmt_core: patch dwn:0 frag(129, 664) ok
  6411.  
  6412. [ 8.646834] <0>.(0)[1:init]BOOTPROF: 8646.814711:start teei cfg (on post-fs-data)
  6413.  
  6414. [ 8.650096] <0>.(0)[1:init]BOOTPROF: 8650.077865:start teei cfg end (on post-fs-data)
  6415.  
  6416. [ 8.651501] <0>.(0)[1:init]BOOTPROF: 8651.480942:start teei cfg end (set soter property)
  6417.  
  6418. [ 8.652881] <0>.(0)[1:init]BOOTPROF: 8652.860712:post-fs-data: on modem start
  6419.  
  6420. [ 8.673746] <0>.(0)[250:mtk_wmtd]vcn33_bt: unsupportable voltage range: 3300000-3300uV
  6421.  
  6422. [ 8.675159] <1>.(1)[250:mtk_wmtd]vcn33_wifi: unsupportable voltage range: 3300000-3300uV
  6423.  
  6424. [ 8.919001] <2>.(2)[244:surfaceflinger]BOOTPROF: 8918.979020:BOOT_Animation:START
  6425.  
  6426. [ 8.919843] <2>.(0)[1:init]init: Starting service 'bootanim'...
  6427.  
  6428. [ 8.923411] <2>.(2)[244:surfaceflinger]DISP/MTKFB [FB Driver] enter late_resume
  6429.  
  6430. [ 8.923508] <2>.(2)[244:surfaceflinger]DISP/MTKFB [FB Driver] leave late_resume
  6431.  
  6432. [ 8.923514] <2>.(2)[244:surfaceflinger][Power/cpufreq] @_mt_cpufreq_lcm_status_switch: LCM is on
  6433.  
  6434. [ 8.923820] <2>.(2)[244:surfaceflinger]
  6435.  
  6436. [ 8.923820] <2><<SOC DVFS FLIPER>> Late Resume
  6437.  
  6438. [ 8.923826] <2>.(2)[244:surfaceflinger]fliper enable +++
  6439.  
  6440. [ 8.923837] <2>.(2)[244:surfaceflinger]mtk-tpd: fb_notify(blank=0)
  6441.  
  6442. [ 8.923842] <2>.(2)[244:surfaceflinger]mtk-tpd: LCD ON Notify
  6443.  
  6444. [ 8.923855] <2>.(2)[244:surfaceflinger][HIF-SDIO][W]wmt_fb_notifier_callback:@@@@@@@@@@wmt enter UNBLANK @@@@@@@@@@@@@@
  6445.  
  6446. [ 8.927615] <2>.(0)[216:logd.auditd]type=1400 audit(1420070541.030:15): avc: denied { getattr } for pid=292 comm="bootanimation" path="/vendor" dev="rootfs" ino=6898 scontext=u:r:bootanim:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=0
  6447.  
  6448. [ 8.934332] <2>.(2)[17:kworker/2:0][HIF-SDIO][I]mtk_wcn_wmt_func_ctrl:wmt-exp: OPID(3) type(9) start
  6449.  
  6450. [ 8.935502] <2>.(2)[17:kworker/2:0]AEE_MONITOR_SET[status]: 0x1
  6451.  
  6452. [ 8.935505] <2>.(2)[17:kworker/2:0][WMT-PLAT][W]wmt_plat_wake_lock_ctrl:WMT-PLAT: wakelock status(1), counter(2)
  6453.  
  6454. [ 8.995425] <1>.(1)[250:mtk_wmtd][WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xffffffc0010c3ae0)
  6455.  
  6456. [ 8.997523] <1>.(1)[250:mtk_wmtd][WMT-IC][W]mtk_wcn_soc_sw_init:co-clock disabled.
  6457.  
  6458. [ 9.001204] <1>.(1)[250:mtk_wmtd][STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
  6459.  
  6460. [ 9.002365] <1>.(1)[250:mtk_wmtd][STP] mtk_wcn_stp_ready:[I] set ready (1)
  6461.  
  6462. [ 9.003246] <1>.(1)[250:mtk_wmtd][WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:0 lpbk:2 coredump:0 wmt:2 ant:0 sd1:0 sd2:0 stp:0)
  6463.  
  6464. [ 9.005115] <2>.(2)[261:pwr_on_conn][WMT-PLAT][W]wmt_plat_wake_lock_ctrl:WMT-PLAT: wakelock status(1), counter(1)
  6465.  
  6466. [ 9.006429] <2>.(2)[261:pwr_on_conn][HIF-SDIO][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(9) ok
  6467.  
  6468. [ 9.007779] <1>.(1)[250:mtk_wmtd][WMT-CORE][W]opfunc_func_on:func(9) already on
  6469.  
  6470. [ 9.009461] <2>.(2)[17:kworker/2:0][HIF-SDIO][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(9) ok
  6471.  
  6472. [ 9.010496] <2>.(2)[17:kworker/2:0][HIF-SDIO][I]wmt_pwr_on_off_handler:WMT turn on LPBK suceed
  6473.  
  6474. [ 9.456927] <2>.(2)[98:hps_main]CPU3: shutdown
  6475.  
  6476. [ 9.458446] <2>.(2)[98:hps_main][HPS] (0200)(4)action end(181)(160)(0)(1) (4)(4)(4)(4)(1) (0)(0)(0) (1972)(18)(2) (0)(160)(18)(0)(160) wifi_base(0)
  6477.  
  6478. [ 9.868397] <2>.(2)[17:kworker/2:0][MUSB]do_connect_rescue_work 526: do_connect_rescue_work, issue connection work
  6479.  
  6480. [ 9.869757] <0>-(0)[102:kworker/u8:1]do_connection_work: 2 callbacks suppressed
  6481.  
  6482. [ 9.870695] <0>.(0)[102:kworker/u8:1][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  6483.  
  6484. [ 9.871795] <0>.(0)[102:kworker/u8:1][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  6485.  
  6486. [ 9.873007] <0>.(0)[102:kworker/u8:1][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  6487.  
  6488. [ 9.874364] <0>-(0)[102:kworker/u8:1][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  6489.  
  6490. [ 9.875790] <0>-(0)[102:kworker/u8:1][MUSB]do_connection_work 463: in uart mode, return
  6491.  
  6492. [ 9.934778] AEE_MONITOR_SET[status]: 0x1
  6493.  
  6494. [ 10.088376] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6495.  
  6496. [ 10.462302] <0>.(0)[98:hps_main]CPU2: shutdown
  6497.  
  6498. [ 10.464204] <0>.(0)[98:hps_main][HPS] (0200)(3)action end(114)(92)(0)(0) (4)(4)(4)(4)(1) (268)(10)(0) (1336)(10)(2) (0)(92)(10)(0)(92) wifi_base(0)
  6499.  
  6500. [ 10.670831] <1>.(1)[257:vold]BOOTPROF: 10670.803793:vold:encrypt_master_key:START
  6501.  
  6502. [ 10.672057] <1>.(1)[257:vold]BOOTPROF: 10672.042716:vold:keymaster_create_key:START
  6503.  
  6504. [ 10.935614] AEE_MONITOR_SET[status]: 0x1
  6505.  
  6506. [ 11.382358] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  6507.  
  6508. [ 11.936524] AEE_MONITOR_SET[status]: 0x1
  6509.  
  6510. [ 12.937415] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 13.098529] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6511.  
  6512. [ 13.938636] AEE_MONITOR_SET[status]: 0x1
  6513.  
  6514. [ 14.939545] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  6515.  
  6516. [ 16.108464] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6517.  
  6518. [ 16.431516] <1>-(1)[0:swapper/1]random: nonblocking pool is initialized
  6519.  
  6520. [ 16.941440] AEE_MONITOR_SET[status]: 0x1
  6521.  
  6522. [ 17.800151] <1>.(1)[158:bat_thread_kthr][BAT_thread]Cable out
  6523.  
  6524. [ 17.800935] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  6525.  
  6526. [ 17.801874] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  6527.  
  6528. [ 17.801938] <1>.(0)[114:kworker/u8:2][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  6529.  
  6530. [ 17.801969] <1>.(0)[114:kworker/u8:2][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  6531.  
  6532. [ 17.801986] <1>.(0)[114:kworker/u8:2][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  6533.  
  6534. [ 17.802079] <1>-(0)[114:kworker/u8:2][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  6535.  
  6536. [ 17.802092] <1>-(0)[114:kworker/u8:2][MUSB]do_connection_work 463: in uart mode, return
  6537.  
  6538. [ 17.825478] <0>.(0)[158:bat_thread_kthr][FGADC] 0,4193,0,3948,74,72,72,1428,1428,135,0,0,1000,3807,1000,28,28,101,103
  6539.  
  6540. [ 17.831376] <0>.(0)[158:bat_thread_kthr]AvgVbat=(3799,3807),AvgI=(0,0),VChr=66,AvgT=(24,24),SOC=(72,72),UI_SOC=72,ZCV=3948,CHR_Type=0 bcct:0:0 I:7000 Ibat:-431
  6541.  
  6542. [ 17.833219] <0>.(0)[158:bat_thread_kthr]v=3807,i=0,t=24,soc=72,bcct:0:0 I:7000 Ibat:-431
  6543.  
  6544. [ 17.834268] <0>.(0)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  6545.  
  6546. [ 17.835732] <0>.(0)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  6547.  
  6548. [ 17.836725] <0>.(0)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  6549.  
  6550. [ 17.839883] <0>.(0)[235:healthd]healthd: Unknown battery status '3'
  6551.  
  6552. [ 17.841454] <0>.(0)[235:healthd]healthd: battery l=72 v=3799 t=24.0 h=2 st=4 chg=
  6553.  
  6554. [ 17.842452] <0>.(0)[235:healthd]healthd: battery l=72 v=3799 t=24.0 h=2 st=4 chg=
  6555.  
  6556. [ 17.843545] <0>.(0)[235:healthd]healthd: send_already = 0
  6557.  
  6558. [ 17.942355] AEE_MONITOR_SET[status]: 0x1
  6559.  
  6560. [ 18.354677] <1>.(1)[238:wmt_launcher][WMT-CONSYS-HW][E]mtk_wcn_consys_set_dbg_mode(1268):fw dbg mode register value(0x00000000)
  6561.  
  6562. [ 18.943279] AEE_MONITOR_SET[status]: 0x1
  6563.  
  6564. [ 19.118476] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6565.  
  6566. [ 19.944192] AEE_MONITOR_SET[status]: 0x1
  6567.  
  6568. [ 20.945208] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 21.383267] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  6569.  
  6570. [ 21.828422] <1>.(1)[162:wdtk-1][WDK]: kick Ex WDT,RT[21828396512]
  6571.  
  6572. [ 21.946356] AEE_MONITOR_SET[status]: 0x1
  6573.  
  6574. [ 22.128436] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6575.  
  6576. [ 22.947219] AEE_MONITOR_SET[status]: 0x1
  6577.  
  6578. [ 23.948806] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  6579.  
  6580. [ 25.138459] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6581.  
  6582. [ 25.950639] AEE_MONITOR_SET[status]: 0x1
  6583.  
  6584. [ 26.951567] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 27.800189] <0>.(0)[158:bat_thread_kthr][BAT_thread]Cable out
  6585.  
  6586. [ 27.800977] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  6587.  
  6588. [ 27.801938] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  6589.  
  6590. [ 27.802023] <0>.(1)[144:kworker/u8:3][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  6591.  
  6592. [ 27.802053] <0>.(1)[144:kworker/u8:3][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  6593.  
  6594. [ 27.802071] <0>.(1)[144:kworker/u8:3][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  6595.  
  6596. [ 27.802165] <0>-(1)[144:kworker/u8:3][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  6597.  
  6598. [ 27.802178] <0>-(1)[144:kworker/u8:3][MUSB]do_connection_work 463: in uart mode, return
  6599.  
  6600. [ 27.820542] <1>.(1)[158:bat_thread_kthr][FGADC] 0,3838,-2,3948,74,72,72,1428,1428,124,0,0,1000,3810,1000,28,28,101,103
  6601.  
  6602. [ 27.822484] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3799,3810),AvgI=(0,0),VChr=66,AvgT=(24,24),SOC=(72,72),UI_SOC=72,ZCV=3948,CHR_Type=0 bcct:0:0 I:7000 Ibat:-382
  6603.  
  6604. [ 27.824583] <1>.(1)[158:bat_thread_kthr]v=3810,i=0,t=24,soc=72,bcct:0:0 I:7000 Ibat:-382
  6605.  
  6606. [ 27.825672] <1>.(1)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  6607.  
  6608. [ 27.826649] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  6609.  
  6610. [ 27.827619] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  6611.  
  6612. [ 27.952770] AEE_MONITOR_SET[status]: 0x1
  6613.  
  6614. [ 28.148466] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6615.  
  6616. [ 28.953638] AEE_MONITOR_SET[status]: 0x1
  6617.  
  6618. [ 29.954670] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 30.685482] <0>.(0)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3806(mV) * 5500(mA) = 20933(mW)
  6619.  
  6620. [ 30.955787] AEE_MONITOR_SET[status]: 0x1
  6621.  
  6622. [ 31.158412] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6623.  
  6624. [ 31.298416] <0>.(0)[134:hang_detect][Hang_Detect] hang_detect disabled.
  6625.  
  6626. [ 31.382271] <0>-(0)[0:swapper/0][Power/swap]CNT(dpidle,rgidle): [0] = (0,172823), [1] = (0,165686), [2] = (0,27770), [3] = (0,7956),
  6627.  
  6628. [ 31.383796] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_cnt: [by_cpu] = 373845, [by_clk] = 0, [by_tmr] = 0, [by_oth] = 45, [by_vtg] = 0,
  6629.  
  6630. [ 31.385363] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_mask: 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
  6631.  
  6632. [ 31.387755] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  6633.  
  6634. [ 31.956666] AEE_MONITOR_SET[status]: 0x1
  6635.  
  6636. [ 32.478460] <1>.(1)[152:read_poweroff_l]ram_console: open expdb partition error [-2]!
  6637.  
  6638. [ 32.957567] AEE_MONITOR_SET[status]: 0x1
  6639.  
  6640. [ 33.958585] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 34.168423] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6641.  
  6642. [ 34.959736] AEE_MONITOR_SET[status]: 0x1
  6643.  
  6644. [ 35.960686] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  6645.  
  6646. [ 37.178589] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6647.  
  6648. [ 37.800338] <1>.(1)[158:bat_thread_kthr][BAT_thread]Cable out
  6649.  
  6650. [ 37.801971] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  6651.  
  6652. [ 37.802920] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  6653.  
  6654. [ 37.802966] <1>.(0)[144:kworker/u8:3][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  6655.  
  6656. [ 37.803002] <1>.(0)[144:kworker/u8:3][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  6657.  
  6658. [ 37.803020] <1>.(0)[144:kworker/u8:3][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  6659.  
  6660. [ 37.803114] <1>-(0)[144:kworker/u8:3][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  6661.  
  6662. [ 37.803127] <1>-(0)[144:kworker/u8:3][MUSB]do_connection_work 463: in uart mode, return
  6663.  
  6664. [ 37.821931] <1>.(1)[158:bat_thread_kthr][FGADC] 0,3918,-2,3947,74,72,72,1428,1428,127,0,0,1000,3810,1000,28,28,101,103
  6665.  
  6666. [ 37.823553] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3800,3810),AvgI=(0,0),VChr=66,AvgT=(24,24),SOC=(72,72),UI_SOC=72,ZCV=3947,CHR_Type=0 bcct:0:0 I:7000 Ibat:-398
  6667.  
  6668. [ 37.826012] <0>.(0)[158:bat_thread_kthr]v=3810,i=0,t=24,soc=72,bcct:0:0 I:7000 Ibat:-398
  6669.  
  6670. [ 37.827225] <0>.(0)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  6671.  
  6672. [ 37.829934] <0>.(0)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  6673.  
  6674. [ 37.830964] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  6675.  
  6676. [ 37.962540] AEE_MONITOR_SET[status]: 0x1
  6677.  
  6678. [ 38.963377] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 39.964538] AEE_MONITOR_SET[status]: 0x1
  6679.  
  6680. [ 40.188417] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6681.  
  6682. [ 40.785590] <1>.(1)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3802(mV) * 5500(mA) = 20911(mW)
  6683.  
  6684. [ 40.965350] AEE_MONITOR_SET[status]: 0x1
  6685.  
  6686. [ 41.388439] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  6687.  
  6688. [ 41.838420] <1>.(1)[162:wdtk-1][WDK]: kick Ex WDT,RT[41838398637]
  6689.  
  6690. [ 41.966181] AEE_MONITOR_SET[status]: 0x1
  6691.  
  6692. [ 42.967040] AEE_MONITOR_SET[status]: 0x1
  6693.  
  6694. [ 43.198481] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6695.  
  6696. [ 43.967969] AEE_MONITOR_SET[status]: 0x1
  6697.  
  6698. [ 44.968991] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  6699.  
  6700. [ 46.208452] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6701.  
  6702. [ 46.971273] AEE_MONITOR_SET[status]: 0x1
  6703.  
  6704. [ 47.800364] <1>.(1)[158:bat_thread_kthr][BAT_thread]Cable out
  6705.  
  6706. [ 47.801164] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  6707.  
  6708. [ 47.802114] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  6709.  
  6710. [ 47.802165] <1>.(0)[144:kworker/u8:3][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  6711.  
  6712. [ 47.802223] <1>.(0)[144:kworker/u8:3][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  6713.  
  6714. [ 47.802242] <1>.(0)[144:kworker/u8:3][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  6715.  
  6716. [ 47.802335] <1>-(0)[144:kworker/u8:3][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  6717.  
  6718. [ 47.802349] <1>-(0)[144:kworker/u8:3][MUSB]do_connection_work 463: in uart mode, return
  6719.  
  6720. [ 47.825777] <1>.(1)[158:bat_thread_kthr][FGADC] 0,4359,-4,3947,74,72,72,1428,1428,139,0,0,1000,3807,1000,28,28,101,103
  6721.  
  6722. [ 47.827378] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3800,3807),AvgI=(0,0),VChr=66,AvgT=(24,24),SOC=(72,72),UI_SOC=72,ZCV=3947,CHR_Type=0 bcct:0:0 I:7000 Ibat:-440
  6723.  
  6724. [ 47.829727] <1>.(1)[158:bat_thread_kthr]v=3807,i=0,t=24,soc=72,bcct:0:0 I:7000 Ibat:-440
  6725.  
  6726. [ 47.830774] <1>.(1)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  6727.  
  6728. [ 47.831732] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  6729.  
  6730. [ 47.832692] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  6731.  
  6732. [ 47.972291] AEE_MONITOR_SET[status]: 0x1
  6733.  
  6734. [ 48.973195] AEE_MONITOR_SET[status]: 0x1
  6735.  
  6736. [ 49.218467] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6737.  
  6738. [ 49.974118] AEE_MONITOR_SET[status]: 0x1
  6739.  
  6740. [ 50.886477] <1>.(1)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3805(mV) * 5500(mA) = 20927(mW)
  6741.  
  6742. [ 50.974877] AEE_MONITOR_SET[status]: 0x1
  6743.  
  6744. [ 51.389300] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  6745.  
  6746. [ 51.975767] AEE_MONITOR_SET[status]: 0x1
  6747.  
  6748. [ 52.228436] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6749.  
  6750. [ 52.976703] AEE_MONITOR_SET[status]: 0x1
  6751.  
  6752. [ 53.977567] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  6753.  
  6754. [ 55.238437] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6755.  
  6756. [ 55.979657] AEE_MONITOR_SET[status]: 0x1
  6757.  
  6758. [ 56.980632] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 57.800441] <0>.(0)[158:bat_thread_kthr][BAT_thread]Cable out
  6759.  
  6760. [ 57.801229] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  6761.  
  6762. [ 57.802173] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  6763.  
  6764. [ 57.802255] <0>.(1)[6:kworker/u8:0][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  6765.  
  6766. [ 57.802285] <0>.(1)[6:kworker/u8:0][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  6767.  
  6768. [ 57.802302] <0>.(1)[6:kworker/u8:0][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  6769.  
  6770. [ 57.802397] <0>-(1)[6:kworker/u8:0][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  6771.  
  6772. [ 57.802410] <0>-(1)[6:kworker/u8:0][MUSB]do_connection_work 463: in uart mode, return
  6773.  
  6774. [ 57.820708] <1>.(1)[158:bat_thread_kthr][FGADC] 0,3918,-4,3946,74,72,72,1428,1428,127,0,0,1000,3807,1000,28,28,101,103
  6775.  
  6776. [ 57.822680] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3800,3807),AvgI=(0,0),VChr=66,AvgT=(24,24),SOC=(72,72),UI_SOC=72,ZCV=3946,CHR_Type=0 bcct:0:0 I:7000 Ibat:-385
  6777.  
  6778. [ 57.824525] <1>.(1)[158:bat_thread_kthr]v=3807,i=0,t=24,soc=72,bcct:0:0 I:7000 Ibat:-385
  6779.  
  6780. [ 57.825568] <1>.(1)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  6781.  
  6782. [ 57.826646] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  6783.  
  6784. [ 57.827640] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  6785.  
  6786. [ 57.830696] <0>.(0)[235:healthd]healthd: Unknown battery status '3'
  6787.  
  6788. [ 57.836988] <0>.(0)[235:healthd]healthd: battery l=72 v=3800 t=24.0 h=2 st=4 chg=
  6789.  
  6790. [ 57.838013] <0>.(0)[235:healthd]healthd: battery l=72 v=3800 t=24.0 h=2 st=4 chg=
  6791.  
  6792. [ 57.841225] <1>.(1)[235:healthd]healthd: send_already = 0
  6793.  
  6794. [ 57.981820] AEE_MONITOR_SET[status]: 0x1
  6795.  
  6796. [ 58.249100] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6797.  
  6798. [ 58.982760] AEE_MONITOR_SET[status]: 0x1
  6799.  
  6800. [ 59.983668] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 60.984707] AEE_MONITOR_SET[status]: 0x1
  6801.  
  6802. [ 60.986515] <0>.(0)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3801(mV) * 5500(mA) = 20905(mW)
  6803.  
  6804. [ 61.258424] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6805.  
  6806. [ 61.308382] <0>.(0)[134:hang_detect][Hang_Detect] hang_detect disabled.
  6807.  
  6808. [ 61.388307] <0>-(0)[0:swapper/0][Power/swap]CNT(dpidle,rgidle): [0] = (0,376097), [1] = (0,370212), [2] = (0,27770), [3] = (0,7956),
  6809.  
  6810. [ 61.389832] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_cnt: [by_cpu] = 407767, [by_clk] = 0, [by_tmr] = 0, [by_oth] = 0, [by_vtg] = 0,
  6811.  
  6812. [ 61.391388] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_mask: 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
  6813.  
  6814. [ 61.394253] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  6815.  
  6816. [ 61.848408] <1>.(1)[162:wdtk-1][WDK]: kick Ex WDT,RT[61848385684]
  6817.  
  6818. [ 61.985537] AEE_MONITOR_SET[status]: 0x1
  6819.  
  6820. [ 62.986342] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 63.987509] AEE_MONITOR_SET[status]: 0x1
  6821.  
  6822. [ 64.269608] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6823.  
  6824. [ 64.988475] AEE_MONITOR_SET[status]: 0x1
  6825.  
  6826. [ 65.989436] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  6827.  
  6828. [ 67.278491] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6829.  
  6830. [ 67.800459] <0>.(0)[158:bat_thread_kthr][BAT_thread]Cable out
  6831.  
  6832. [ 67.801480] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  6833.  
  6834. [ 67.802450] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  6835.  
  6836. [ 67.802492] <0>.(1)[144:kworker/u8:3][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  6837.  
  6838. [ 67.802525] <0>.(1)[144:kworker/u8:3][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  6839.  
  6840. [ 67.802543] <0>.(1)[144:kworker/u8:3][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  6841.  
  6842. [ 67.802635] <0>-(1)[144:kworker/u8:3][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  6843.  
  6844. [ 67.802648] <0>-(1)[144:kworker/u8:3][MUSB]do_connection_work 463: in uart mode, return
  6845.  
  6846. [ 67.820435] <1>.(1)[158:bat_thread_kthr][FGADC] 0,4011,-6,3945,73,72,72,1428,1428,130,0,0,1000,3807,1000,28,28,101,103
  6847.  
  6848. [ 67.822098] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3800,3807),AvgI=(0,0),VChr=66,AvgT=(24,24),SOC=(72,72),UI_SOC=72,ZCV=3945,CHR_Type=0 bcct:0:0 I:7000 Ibat:-396
  6849.  
  6850. [ 67.824005] <1>.(1)[158:bat_thread_kthr]v=3807,i=0,t=24,soc=72,bcct:0:0 I:7000 Ibat:-396
  6851.  
  6852. [ 67.825056] <1>.(1)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  6853.  
  6854. [ 67.826030] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  6855.  
  6856. [ 67.827070] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  6857.  
  6858. [ 67.929915] <1>.(1)[1:init]init: avc: denied { set } for property=net.handover.thlte pid=245 uid=1001 gid=1001 scontext=u:r:mtkmal:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service permissive=0
  6859.  
  6860. [ 67.932333] <1>.(1)[1:init]init: sys_prop: permission denied uid:1001 name:net.handover.thlte
  6861.  
  6862. [ 67.991300] AEE_MONITOR_SET[status]: 0x1
  6863.  
  6864. [ 68.992209] AEE_MONITOR_SET[status]: 0x1
  6865.  
  6866. [ 69.993135] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 70.288443] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6867.  
  6868. [ 70.994303] AEE_MONITOR_SET[status]: 0x1
  6869.  
  6870. [ 71.088479] <0>.(0)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3801(mV) * 5500(mA) = 20905(mW)
  6871.  
  6872. [ 71.395285] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  6873.  
  6874. [ 71.995236] AEE_MONITOR_SET[status]: 0x1
  6875.  
  6876. [ 72.996186] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 73.298452] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6877.  
  6878. [ 73.997340] AEE_MONITOR_SET[status]: 0x1
  6879.  
  6880. [ 74.998306] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  6881.  
  6882. [ 76.308457] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6883.  
  6884. [ 77.000349] AEE_MONITOR_SET[status]: 0x1
  6885.  
  6886. [ 77.800587] <0>.(0)[158:bat_thread_kthr][BAT_thread]Cable out
  6887.  
  6888. [ 77.802510] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  6889.  
  6890. [ 77.803484] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  6891.  
  6892. [ 77.803519] <0>.(1)[6:kworker/u8:0][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  6893.  
  6894. [ 77.803554] <0>.(1)[6:kworker/u8:0][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  6895.  
  6896. [ 77.803571] <0>.(1)[6:kworker/u8:0][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  6897.  
  6898. [ 77.803662] <0>-(1)[6:kworker/u8:0][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  6899.  
  6900. [ 77.803675] <0>-(1)[6:kworker/u8:0][MUSB]do_connection_work 463: in uart mode, return
  6901.  
  6902. [ 77.821914] <1>.(1)[158:bat_thread_kthr][FGADC] 0,3910,-6,3945,73,72,72,1428,1428,127,0,0,1000,3807,1000,28,28,101,103
  6903.  
  6904. [ 77.823860] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3800,3807),AvgI=(0,0),VChr=66,AvgT=(24,24),SOC=(72,72),UI_SOC=72,ZCV=3945,CHR_Type=0 bcct:0:0 I:7000 Ibat:-391
  6905.  
  6906. [ 77.825700] <1>.(1)[158:bat_thread_kthr]v=3807,i=0,t=24,soc=72,bcct:0:0 I:7000 Ibat:-391
  6907.  
  6908. [ 77.826742] <1>.(1)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  6909.  
  6910. [ 77.827720] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  6911.  
  6912. [ 77.828811] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  6913.  
  6914. [ 78.001323] AEE_MONITOR_SET[status]: 0x1
  6915.  
  6916. [ 79.002236] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 79.318455] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6917.  
  6918. [ 80.003359] AEE_MONITOR_SET[status]: 0x1
  6919.  
  6920. [ 81.004307] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 81.191885] <1>.(1)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3800(mV) * 5500(mA) = 20900(mW)
  6921.  
  6922. [ 81.396307] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  6923.  
  6924. [ 81.858423] <1>.(1)[162:wdtk-1][WDK]: kick Ex WDT,RT[81858405271]
  6925.  
  6926. [ 82.005438] AEE_MONITOR_SET[status]: 0x1
  6927.  
  6928. [ 82.328403] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6929.  
  6930. [ 83.006262] AEE_MONITOR_SET[status]: 0x1
  6931.  
  6932. [ 84.007109] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  6933.  
  6934. [ 85.338452] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6935.  
  6936. [ 86.009159] AEE_MONITOR_SET[status]: 0x1
  6937.  
  6938. [ 87.010030] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 87.800649] <0>.(0)[158:bat_thread_kthr][BAT_thread]Cable out
  6939.  
  6940. [ 87.801448] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  6941.  
  6942. [ 87.802406] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  6943.  
  6944. [ 87.802448] <0>.(1)[102:kworker/u8:1][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  6945.  
  6946. [ 87.802479] <0>.(1)[102:kworker/u8:1][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  6947.  
  6948. [ 87.802496] <0>.(1)[102:kworker/u8:1][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  6949.  
  6950. [ 87.802589] <0>-(1)[102:kworker/u8:1][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  6951.  
  6952. [ 87.802602] <0>-(1)[102:kworker/u8:1][MUSB]do_connection_work 463: in uart mode, return
  6953.  
  6954. [ 87.827027] <1>.(1)[158:bat_thread_kthr][FGADC] 0,4591,-8,3945,73,72,72,1428,1428,148,0,0,1000,3807,1000,28,28,101,103
  6955.  
  6956. [ 87.828754] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3801,3807),AvgI=(0,0),VChr=66,AvgT=(24,24),SOC=(72,72),UI_SOC=72,ZCV=3945,CHR_Type=0 bcct:0:0 I:7000 Ibat:-412
  6957.  
  6958. [ 87.830569] <1>.(1)[158:bat_thread_kthr]v=3807,i=0,t=24,soc=72,bcct:0:0 I:7000 Ibat:-412
  6959.  
  6960. [ 87.831604] <1>.(1)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  6961.  
  6962. [ 87.832554] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  6963.  
  6964. [ 87.833563] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  6965.  
  6966. [ 88.011176] AEE_MONITOR_SET[status]: 0x1
  6967.  
  6968. [ 88.348437] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6969.  
  6970. [ 89.012061] AEE_MONITOR_SET[status]: 0x1
  6971.  
  6972. [ 90.012987] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  6973.  
  6974. [ 91.289842] <0>.(0)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3802(mV) * 5500(mA) = 20911(mW)
  6975.  
  6976. [ 91.318378] <0>.(0)[134:hang_detect][Hang_Detect] hang_detect disabled.
  6977.  
  6978. [ 91.358379] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6979.  
  6980. [ 91.394308] <0>-(0)[0:swapper/0][Power/swap]CNT(dpidle,rgidle): [0] = (0,574914), [1] = (0,570334), [2] = (0,27770), [3] = (0,7956),
  6981.  
  6982. [ 91.395814] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_cnt: [by_cpu] = 398912, [by_clk] = 0, [by_tmr] = 0, [by_oth] = 0, [by_vtg] = 0,
  6983.  
  6984. [ 91.397351] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_mask: 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
  6985.  
  6986. [ 91.399542] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  6987.  
  6988. [ 92.014856] AEE_MONITOR_SET[status]: 0x1
  6989.  
  6990. [ 93.015719] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  6991.  
  6992. [ 94.368417] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6993.  
  6994. [ 95.017510] AEE_MONITOR_SET[status]: 0x1
  6995.  
  6996. [ 96.018546] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  6997.  
  6998. [ 97.378434] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  6999.  
  7000. [ 97.800688] <1>.(1)[158:bat_thread_kthr][BAT_thread]Cable out
  7001.  
  7002. [ 97.801450] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  7003.  
  7004. [ 97.802722] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  7005.  
  7006. [ 97.803942] <1>.(1)[144:kworker/u8:3][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  7007.  
  7008. [ 97.805058] <1>.(1)[144:kworker/u8:3][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  7009.  
  7010. [ 97.806306] <1>.(1)[144:kworker/u8:3][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  7011.  
  7012. [ 97.807688] <1>-(1)[144:kworker/u8:3][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  7013.  
  7014. [ 97.809124] <1>-(1)[144:kworker/u8:3][MUSB]do_connection_work 463: in uart mode, return
  7015.  
  7016. [ 97.817871] <1>.(1)[158:bat_thread_kthr][FGADC] 0,4199,-10,3945,73,72,72,1428,1428,135,0,0,1000,3806,1000,28,28,101,103
  7017.  
  7018. [ 97.819572] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3801,3806),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(72,72),UI_SOC=72,ZCV=3945,CHR_Type=0 bcct:0:0 I:7000 Ibat:-427
  7019.  
  7020. [ 97.821380] <1>.(1)[158:bat_thread_kthr]v=3806,i=0,t=25,soc=72,bcct:0:0 I:7000 Ibat:-427
  7021.  
  7022. [ 97.822410] <1>.(1)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  7023.  
  7024. [ 97.823376] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  7025.  
  7026. [ 97.824388] <0>.(0)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  7027.  
  7028. [ 97.826353] <1>.(1)[235:healthd]healthd: Unknown battery status '3'
  7029.  
  7030. [ 97.827840] <1>.(1)[235:healthd]healthd: battery l=72 v=3801 t=24.0 h=2 st=4 chg=
  7031.  
  7032. [ 97.829268] <1>.(1)[235:healthd]healthd: battery l=72 v=3801 t=24.0 h=2 st=4 chg=
  7033.  
  7034. [ 97.830572] <1>.(1)[235:healthd]healthd: send_already = 0
  7035.  
  7036. [ 98.020317] AEE_MONITOR_SET[status]: 0x1
  7037.  
  7038. [ 99.021217] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7039.  
  7040. [ 100.388424] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7041.  
  7042. [ 101.023567] AEE_MONITOR_SET[status]: 0x1
  7043.  
  7044. [ 101.392378] <0>.(0)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3803(mV) * 5500(mA) = 20916(mW)
  7045.  
  7046. [ 101.400288] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  7047.  
  7048. [ 101.868410] <1>.(1)[162:wdtk-1][WDK]: kick Ex WDT,RT[101868392165]
  7049.  
  7050. [ 102.024426] AEE_MONITOR_SET[status]: 0x1
  7051.  
  7052. [ 103.025245] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 103.398402] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7053.  
  7054. [ 104.026698] AEE_MONITOR_SET[status]: 0x1
  7055.  
  7056. [ 105.027525] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7057.  
  7058. [ 106.408415] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7059.  
  7060. [ 107.029458] AEE_MONITOR_SET[status]: 0x1
  7061.  
  7062. [ 107.800751] <0>.(0)[158:bat_thread_kthr][BAT_thread]Cable out
  7063.  
  7064. [ 107.801537] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  7065.  
  7066. [ 107.802483] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  7067.  
  7068. [ 107.802542] <0>.(1)[102:kworker/u8:1][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  7069.  
  7070. [ 107.802589] <0>.(1)[102:kworker/u8:1][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  7071.  
  7072. [ 107.802603] <0>.(1)[102:kworker/u8:1][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  7073.  
  7074. [ 107.802690] <0>-(1)[102:kworker/u8:1][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  7075.  
  7076. [ 107.802700] <0>-(1)[102:kworker/u8:1][MUSB]do_connection_work 463: in uart mode, return
  7077.  
  7078. [ 107.821762] <1>.(1)[158:bat_thread_kthr][FGADC] 0,4019,-10,3944,73,72,72,1428,1428,130,0,0,1000,3804,1000,28,28,101,103
  7079.  
  7080. [ 107.823368] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3801,3804),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(72,72),UI_SOC=72,ZCV=3944,CHR_Type=0 bcct:0:0 I:7000 Ibat:-400
  7081.  
  7082. [ 107.825217] <1>.(1)[158:bat_thread_kthr]v=3804,i=0,t=25,soc=72,bcct:0:0 I:7000 Ibat:-400
  7083.  
  7084. [ 107.826254] <1>.(1)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  7085.  
  7086. [ 107.827207] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  7087.  
  7088. [ 107.828207] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  7089.  
  7090. [ 108.030366] AEE_MONITOR_SET[status]: 0x1
  7091.  
  7092. [ 109.031186] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 109.418415] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7093.  
  7094. [ 110.032446] AEE_MONITOR_SET[status]: 0x1
  7095.  
  7096. [ 111.033335] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 111.433721] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  7097.  
  7098. [ 111.492127] <0>.(0)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3798(mV) * 5500(mA) = 20889(mW)
  7099.  
  7100. [ 112.034429] AEE_MONITOR_SET[status]: 0x1
  7101.  
  7102. [ 112.428418] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7103.  
  7104. [ 113.035327] AEE_MONITOR_SET[status]: 0x1
  7105.  
  7106. [ 114.036338] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7107.  
  7108. [ 115.438414] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7109.  
  7110. [ 116.038137] AEE_MONITOR_SET[status]: 0x1
  7111.  
  7112. [ 117.039066] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 117.800788] <1>.(1)[158:bat_thread_kthr][BAT_thread]Cable out
  7113.  
  7114. [ 117.801561] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  7115.  
  7116. [ 117.802505] <0>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  7117.  
  7118. [ 117.802662] <0>.(0)[144:kworker/u8:3][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  7119.  
  7120. [ 117.804883] <0>.(0)[144:kworker/u8:3][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  7121.  
  7122. [ 117.806128] <0>.(0)[144:kworker/u8:3][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  7123.  
  7124. [ 117.807512] <0>-(0)[144:kworker/u8:3][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  7125.  
  7126. [ 117.808947] <0>-(0)[144:kworker/u8:3][MUSB]do_connection_work 463: in uart mode, return
  7127.  
  7128. [ 117.819153] <0>.(0)[158:bat_thread_kthr][FGADC] 0,4116,-12,3943,73,72,72,1428,1428,133,0,0,1000,3805,1000,28,28,101,103
  7129.  
  7130. [ 117.820973] <0>.(0)[158:bat_thread_kthr]AvgVbat=(3801,3805),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(72,72),UI_SOC=72,ZCV=3943,CHR_Type=0 bcct:0:0 I:7000 Ibat:-405
  7131.  
  7132. [ 117.822795] <0>.(0)[158:bat_thread_kthr]v=3805,i=0,t=25,soc=72,bcct:0:0 I:7000 Ibat:-405
  7133.  
  7134. [ 117.823825] <0>.(0)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  7135.  
  7136. [ 117.824775] <0>.(0)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  7137.  
  7138. [ 117.825787] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  7139.  
  7140. [ 118.040154] AEE_MONITOR_SET[status]: 0x1
  7141.  
  7142. [ 118.448417] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7143.  
  7144. [ 119.041031] AEE_MONITOR_SET[status]: 0x1
  7145.  
  7146. [ 120.041895] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7147.  
  7148. [ 121.328386] <0>.(0)[134:hang_detect][Hang_Detect] hang_detect disabled.
  7149.  
  7150. [ 121.400275] <0>-(0)[0:swapper/0][Power/swap]CNT(dpidle,rgidle): [0] = (0,805707), [1] = (0,804261), [2] = (0,27770), [3] = (0,7956),
  7151.  
  7152. [ 121.401802] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_cnt: [by_cpu] = 464678, [by_clk] = 0, [by_tmr] = 0, [by_oth] = 0, [by_vtg] = 0,
  7153.  
  7154. [ 121.403358] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_mask: 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
  7155.  
  7156. [ 121.434353] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  7157.  
  7158. [ 121.458381] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7159.  
  7160. [ 121.593250] <1>.(1)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3799(mV) * 5500(mA) = 20894(mW)
  7161.  
  7162. [ 121.878383] <1>.(1)[162:wdtk-1][WDK]: kick Ex WDT,RT[121878363981]
  7163.  
  7164. [ 122.043634] AEE_MONITOR_SET[status]: 0x1
  7165.  
  7166. [ 123.044690] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7167.  
  7168. [ 124.468491] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7169.  
  7170. [ 125.046413] AEE_MONITOR_SET[status]: 0x1
  7171.  
  7172. [ 126.047283] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7173.  
  7174. [ 127.478434] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7175.  
  7176. [ 127.800846] <1>.(1)[158:bat_thread_kthr][BAT_thread]Cable out
  7177.  
  7178. [ 127.801619] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  7179.  
  7180. [ 127.802567] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  7181.  
  7182. [ 127.802628] <1>.(0)[6:kworker/u8:0][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  7183.  
  7184. [ 127.802672] <1>.(0)[6:kworker/u8:0][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  7185.  
  7186. [ 127.802686] <1>.(0)[6:kworker/u8:0][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  7187.  
  7188. [ 127.802772] <1>-(0)[6:kworker/u8:0][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  7189.  
  7190. [ 127.802782] <1>-(0)[6:kworker/u8:0][MUSB]do_connection_work 463: in uart mode, return
  7191.  
  7192. [ 127.825287] <0>.(0)[158:bat_thread_kthr][FGADC] 0,4468,-12,3943,73,72,72,1428,1428,142,0,0,1000,3803,1000,28,28,101,103
  7193.  
  7194. [ 127.826906] <0>.(0)[158:bat_thread_kthr]AvgVbat=(3801,3803),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(72,72),UI_SOC=72,ZCV=3943,CHR_Type=0 bcct:0:0 I:7000 Ibat:-434
  7195.  
  7196. [ 127.828782] <0>.(0)[158:bat_thread_kthr]v=3803,i=0,t=25,soc=72,bcct:0:0 I:7000 Ibat:-434
  7197.  
  7198. [ 127.829807] <0>.(0)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  7199.  
  7200. [ 127.830775] <0>.(0)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  7201.  
  7202. [ 127.831724] <0>.(0)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  7203.  
  7204. [ 128.049873] AEE_MONITOR_SET[status]: 0x1
  7205.  
  7206. [ 129.050834] AEE_MONITOR_SET[status]: 0x1
  7207.  
  7208. [ 130.051671] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 130.489627] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7209.  
  7210. [ 131.052800] AEE_MONITOR_SET[status]: 0x1
  7211.  
  7212. [ 131.435283] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  7213.  
  7214. [ 131.693716] <0>.(0)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3798(mV) * 5500(mA) = 20889(mW)
  7215.  
  7216. [ 132.053718] AEE_MONITOR_SET[status]: 0x1
  7217.  
  7218. [ 133.054569] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 133.498437] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7219.  
  7220. [ 134.055639] AEE_MONITOR_SET[status]: 0x1
  7221.  
  7222. [ 135.056533] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7223.  
  7224. [ 136.508408] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7225.  
  7226. [ 137.058368] AEE_MONITOR_SET[status]: 0x1
  7227.  
  7228. [ 137.800899] <1>.(1)[158:bat_thread_kthr][BAT_thread]Cable out
  7229.  
  7230. [ 137.801715] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  7231.  
  7232. [ 137.802657] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  7233.  
  7234. [ 137.802715] <1>.(0)[114:kworker/u8:2][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  7235.  
  7236. [ 137.802739] <1>.(0)[114:kworker/u8:2][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  7237.  
  7238. [ 137.802753] <1>.(0)[114:kworker/u8:2][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  7239.  
  7240. [ 137.802838] <1>-(0)[114:kworker/u8:2][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  7241.  
  7242. [ 137.802848] <1>-(0)[114:kworker/u8:2][MUSB]do_connection_work 463: in uart mode, return
  7243.  
  7244. [ 137.820884] <0>.(0)[158:bat_thread_kthr][FGADC] 0,4007,-14,3942,73,72,72,1428,1428,130,0,0,1000,3805,1000,28,28,101,103
  7245.  
  7246. [ 137.822527] <0>.(0)[158:bat_thread_kthr]AvgVbat=(3801,3805),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(72,72),UI_SOC=72,ZCV=3942,CHR_Type=0 bcct:0:0 I:7000 Ibat:-401
  7247.  
  7248. [ 137.824374] <1>.(1)[158:bat_thread_kthr]v=3805,i=0,t=25,soc=72,bcct:0:0 I:7000 Ibat:-401
  7249.  
  7250. [ 137.825478] <1>.(1)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  7251.  
  7252. [ 137.826462] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  7253.  
  7254. [ 137.827462] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  7255.  
  7256. [ 137.831069] <0>.(0)[235:healthd]healthd: Unknown battery status '3'
  7257.  
  7258. [ 137.832547] <0>.(0)[235:healthd]healthd: battery l=72 v=3801 t=24.0 h=2 st=4 chg=
  7259.  
  7260. [ 137.833586] <0>.(0)[235:healthd]healthd: battery l=72 v=3801 t=24.0 h=2 st=4 chg=
  7261.  
  7262. [ 137.835038] <0>.(0)[235:healthd]healthd: send_already = 0
  7263.  
  7264. [ 138.059420] AEE_MONITOR_SET[status]: 0x1
  7265.  
  7266. [ 139.060442] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 139.518456] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7267.  
  7268. [ 140.061534] AEE_MONITOR_SET[status]: 0x1
  7269.  
  7270. [ 141.062496] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 141.436276] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  7271.  
  7272. [ 141.793192] <0>.(0)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3800(mV) * 5500(mA) = 20900(mW)
  7273.  
  7274. [ 141.888414] <1>.(1)[162:wdtk-1][WDK]: kick Ex WDT,RT[141888397568]
  7275.  
  7276. [ 142.063643] AEE_MONITOR_SET[status]: 0x1
  7277.  
  7278. [ 142.528395] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7279.  
  7280. [ 143.064527] AEE_MONITOR_SET[status]: 0x1
  7281.  
  7282. [ 144.065349] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7283.  
  7284. [ 145.538439] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7285.  
  7286. [ 146.067145] AEE_MONITOR_SET[status]: 0x1
  7287.  
  7288. [ 147.068213] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 147.800962] <0>.(0)[158:bat_thread_kthr][BAT_thread]Cable out
  7289.  
  7290. [ 147.801736] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  7291.  
  7292. [ 147.802687] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  7293.  
  7294. [ 147.802724] <0>.(1)[6:kworker/u8:0][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  7295.  
  7296. [ 147.802750] <0>.(1)[6:kworker/u8:0][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  7297.  
  7298. [ 147.802763] <0>.(1)[6:kworker/u8:0][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  7299.  
  7300. [ 147.802849] <0>-(1)[6:kworker/u8:0][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  7301.  
  7302. [ 147.802860] <0>-(1)[6:kworker/u8:0][MUSB]do_connection_work 463: in uart mode, return
  7303.  
  7304. [ 147.819591] <1>.(1)[158:bat_thread_kthr][FGADC] 0,4035,-14,3942,73,72,72,1428,1428,131,0,0,1000,3802,1000,28,28,101,103
  7305.  
  7306. [ 147.821196] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3801,3802),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(72,72),UI_SOC=72,ZCV=3942,CHR_Type=0 bcct:0:0 I:7000 Ibat:-397
  7307.  
  7308. [ 147.823001] <1>.(1)[158:bat_thread_kthr]v=3802,i=0,t=25,soc=72,bcct:0:0 I:7000 Ibat:-397
  7309.  
  7310. [ 147.824075] <1>.(1)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  7311.  
  7312. [ 147.825091] <0>.(0)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  7313.  
  7314. [ 147.826105] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  7315.  
  7316. [ 148.069457] AEE_MONITOR_SET[status]: 0x1
  7317.  
  7318. [ 148.548408] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7319.  
  7320. [ 149.070257] AEE_MONITOR_SET[status]: 0x1
  7321.  
  7322. [ 150.071208] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 151.072381] AEE_MONITOR_SET[status]: 0x1
  7323.  
  7324. [ 151.338380] <1>.(1)[134:hang_detect][Hang_Detect] hang_detect disabled.
  7325.  
  7326. [ 151.406355] <0>-(0)[0:swapper/0][Power/swap]CNT(dpidle,rgidle): [0] = (0,1035378), [1] = (0,1042472), [2] = (0,27770), [3] = (0,7956),
  7327.  
  7328. [ 151.407903] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_cnt: [by_cpu] = 467846, [by_clk] = 0, [by_tmr] = 0, [by_oth] = 0, [by_vtg] = 0,
  7329.  
  7330. [ 151.409458] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_mask: 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
  7331.  
  7332. [ 151.437352] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  7333.  
  7334. [ 151.558403] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7335.  
  7336. [ 151.893618] <1>.(1)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3793(mV) * 5500(mA) = 20861(mW)
  7337.  
  7338. [ 152.073140] AEE_MONITOR_SET[status]: 0x1
  7339.  
  7340. [ 153.074014] AEE_MONITOR_SET[status]: 0x1
  7341.  
  7342. [ 154.074885] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 154.568420] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7343.  
  7344. [ 155.075989] AEE_MONITOR_SET[status]: 0x1
  7345.  
  7346. [ 156.077155] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7347.  
  7348. [ 157.578409] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7349.  
  7350. [ 157.800999] <1>.(1)[158:bat_thread_kthr][BAT_thread]Cable out
  7351.  
  7352. [ 157.801774] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  7353.  
  7354. [ 157.802705] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  7355.  
  7356. [ 157.802735] <1>.(0)[102:kworker/u8:1][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  7357.  
  7358. [ 157.802783] <1>.(0)[102:kworker/u8:1][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  7359.  
  7360. [ 157.802797] <1>.(0)[102:kworker/u8:1][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  7361.  
  7362. [ 157.802882] <1>-(0)[102:kworker/u8:1][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  7363.  
  7364. [ 157.802892] <1>-(0)[102:kworker/u8:1][MUSB]do_connection_work 463: in uart mode, return
  7365.  
  7366. [ 157.822493] <1>.(1)[158:bat_thread_kthr][FGADC] 0,4084,-16,3941,73,71,72,1428,1428,132,0,0,1000,3800,1000,28,29,101,103
  7367.  
  7368. [ 157.824112] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3801,3800),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(71,71),UI_SOC=72,ZCV=3941,CHR_Type=0 bcct:0:0 I:7000 Ibat:-406
  7369.  
  7370. [ 157.825907] <1>.(1)[158:bat_thread_kthr]v=3800,i=0,t=25,soc=72,bcct:0:0 I:7000 Ibat:-406
  7371.  
  7372. [ 157.826927] <1>.(1)[158:bat_thread_kthr][Sync_Real] UI_SOC=72, SOC=71, counter = 1
  7373.  
  7374. [ 157.827876] <1>.(1)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  7375.  
  7376. [ 157.829017] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  7377.  
  7378. [ 157.829976] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  7379.  
  7380. [ 158.078949] AEE_MONITOR_SET[status]: 0x1
  7381.  
  7382. [ 159.079890] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7383.  
  7384. [ 160.588404] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7385.  
  7386. [ 161.081708] AEE_MONITOR_SET[status]: 0x1
  7387.  
  7388. [ 161.438291] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  7389.  
  7390. [ 161.898464] <1>.(1)[162:wdtk-1][WDK]: kick Ex WDT,RT[161898440846]
  7391.  
  7392. [ 161.993533] <0>.(0)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3798(mV) * 5500(mA) = 20889(mW)
  7393.  
  7394. [ 162.082521] AEE_MONITOR_SET[status]: 0x1
  7395.  
  7396. [ 163.083546] AEE_MONITOR_SET[status]: 0x1
  7397.  
  7398. [ 163.598437] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7399.  
  7400. [ 164.084405] AEE_MONITOR_SET[status]: 0x1
  7401.  
  7402. [ 165.085195] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7403.  
  7404. [ 166.608391] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7405.  
  7406. [ 167.087432] AEE_MONITOR_SET[status]: 0x1
  7407.  
  7408. [ 167.801045] <0>.(0)[158:bat_thread_kthr][BAT_thread]Cable out
  7409.  
  7410. [ 167.801854] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  7411.  
  7412. [ 167.802804] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  7413.  
  7414. [ 167.802862] <0>.(1)[6:kworker/u8:0][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  7415.  
  7416. [ 167.802910] <0>.(1)[6:kworker/u8:0][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  7417.  
  7418. [ 167.802924] <0>.(1)[6:kworker/u8:0][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  7419.  
  7420. [ 167.803011] <0>-(1)[6:kworker/u8:0][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  7421.  
  7422. [ 167.803022] <0>-(1)[6:kworker/u8:0][MUSB]do_connection_work 463: in uart mode, return
  7423.  
  7424. [ 167.822104] <1>.(1)[158:bat_thread_kthr][FGADC] 0,4365,-16,3940,72,71,72,1428,1428,141,0,0,1000,3800,1000,28,29,101,103
  7425.  
  7426. [ 167.823728] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3801,3800),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(71,71),UI_SOC=72,ZCV=3940,CHR_Type=0 bcct:0:0 I:7000 Ibat:-409
  7427.  
  7428. [ 167.825526] <1>.(1)[158:bat_thread_kthr]v=3800,i=0,t=25,soc=72,bcct:0:0 I:7000 Ibat:-409
  7429.  
  7430. [ 167.826559] <1>.(1)[158:bat_thread_kthr][Sync_Real] UI_SOC=72, SOC=71, counter = 2
  7431.  
  7432. [ 167.827521] <1>.(1)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  7433.  
  7434. [ 167.828639] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  7435.  
  7436. [ 167.829592] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  7437.  
  7438. [ 168.088240] AEE_MONITOR_SET[status]: 0x1
  7439.  
  7440. [ 169.089393] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 169.618436] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7441.  
  7442. [ 170.090463] AEE_MONITOR_SET[status]: 0x1
  7443.  
  7444. [ 171.091271] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 171.439342] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  7445.  
  7446. [ 172.092499] AEE_MONITOR_SET[status]: 0x1
  7447.  
  7448. [ 172.093390] <1>.(1)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3799(mV) * 5500(mA) = 20894(mW)
  7449.  
  7450. [ 172.628406] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7451.  
  7452. [ 173.093273] AEE_MONITOR_SET[status]: 0x1
  7453.  
  7454. [ 174.094140] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7455.  
  7456. [ 175.638397] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7457.  
  7458. [ 176.096342] AEE_MONITOR_SET[status]: 0x1
  7459.  
  7460. [ 177.097266] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 177.801086] <0>.(0)[158:bat_thread_kthr][BAT_thread]Cable out
  7461.  
  7462. [ 177.801862] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  7463.  
  7464. [ 177.802806] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  7465.  
  7466. [ 177.802873] <0>.(1)[6:kworker/u8:0][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  7467.  
  7468. [ 177.802897] <0>.(1)[6:kworker/u8:0][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  7469.  
  7470. [ 177.802910] <0>.(1)[6:kworker/u8:0][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  7471.  
  7472. [ 177.802996] <0>-(1)[6:kworker/u8:0][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  7473.  
  7474. [ 177.803006] <0>-(1)[6:kworker/u8:0][MUSB]do_connection_work 463: in uart mode, return
  7475.  
  7476. [ 177.820979] <1>.(1)[158:bat_thread_kthr][FGADC] 0,3985,-18,3939,72,71,72,1428,1428,129,0,0,1000,3803,1000,28,29,101,103
  7477.  
  7478. [ 177.822616] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3801,3803),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(71,71),UI_SOC=72,ZCV=3939,CHR_Type=0 bcct:0:0 I:7000 Ibat:-401
  7479.  
  7480. [ 177.824859] <1>.(1)[158:bat_thread_kthr]v=3803,i=0,t=25,soc=72,bcct:0:0 I:7000 Ibat:-401
  7481.  
  7482. [ 177.826121] <1>.(1)[158:bat_thread_kthr][Sync_Real] UI_SOC=72, SOC=71, counter = 3
  7483.  
  7484. [ 177.828157] <1>.(1)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  7485.  
  7486. [ 177.831187] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  7487.  
  7488. [ 177.832180] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  7489.  
  7490. [ 177.835964] <0>.(0)[235:healthd]healthd: Unknown battery status '3'
  7491.  
  7492. [ 177.838705] <1>.(1)[235:healthd]healthd: battery l=72 v=3801 t=24.0 h=2 st=4 chg=
  7493.  
  7494. [ 177.839704] <1>.(1)[235:healthd]healthd: battery l=72 v=3801 t=24.0 h=2 st=4 chg=
  7495.  
  7496. [ 177.840787] <1>.(1)[235:healthd]healthd: send_already = 0
  7497.  
  7498. [ 178.099034] AEE_MONITOR_SET[status]: 0x1
  7499.  
  7500. [ 178.648413] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7501.  
  7502. [ 179.099851] AEE_MONITOR_SET[status]: 0x1
  7503.  
  7504. [ 180.100794] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7505.  
  7506. [ 181.348415] <1>.(1)[134:hang_detect][Hang_Detect] hang_detect disabled.
  7507.  
  7508. [ 181.412354] <0>-(0)[0:swapper/0][Power/swap]CNT(dpidle,rgidle): [0] = (0,1266085), [1] = (0,1277318), [2] = (0,27770), [3] = (0,7956),
  7509.  
  7510. [ 181.413900] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_cnt: [by_cpu] = 465551, [by_clk] = 0, [by_tmr] = 0, [by_oth] = 0, [by_vtg] = 0,
  7511.  
  7512. [ 181.415456] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_mask: 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
  7513.  
  7514. [ 181.440293] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  7515.  
  7516. [ 181.658403] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7517.  
  7518. [ 181.908389] <1>.(1)[162:wdtk-1][WDK]: kick Ex WDT,RT[181908365509]
  7519.  
  7520. [ 182.102606] AEE_MONITOR_SET[status]: 0x1
  7521.  
  7522. [ 182.194314] <0>.(0)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3794(mV) * 5500(mA) = 20867(mW)
  7523.  
  7524. [ 183.103535] AEE_MONITOR_SET[status]: 0x1
  7525.  
  7526. [ 184.104428] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 184.668415] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7527.  
  7528. [ 185.105512] AEE_MONITOR_SET[status]: 0x1
  7529.  
  7530. [ 186.106356] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7531.  
  7532. [ 187.678419] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7533.  
  7534. [ 187.801133] <0>.(0)[158:bat_thread_kthr][BAT_thread]Cable out
  7535.  
  7536. [ 187.801909] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  7537.  
  7538. [ 187.802847] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  7539.  
  7540. [ 187.802921] <0>.(1)[114:kworker/u8:2][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  7541.  
  7542. [ 187.802968] <0>.(1)[114:kworker/u8:2][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  7543.  
  7544. [ 187.802982] <0>.(1)[114:kworker/u8:2][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  7545.  
  7546. [ 187.803068] <0>-(1)[114:kworker/u8:2][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  7547.  
  7548. [ 187.803078] <0>-(1)[114:kworker/u8:2][MUSB]do_connection_work 463: in uart mode, return
  7549.  
  7550. [ 187.822652] <0>.(0)[158:bat_thread_kthr][FGADC] 0,4023,-20,3937,72,71,72,1428,1428,130,0,0,1000,3803,1000,28,29,101,103
  7551.  
  7552. [ 187.824303] <0>.(0)[158:bat_thread_kthr]AvgVbat=(3801,3803),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(71,71),UI_SOC=72,ZCV=3937,CHR_Type=0 bcct:0:0 I:7000 Ibat:-403
  7553.  
  7554. [ 187.826118] <0>.(0)[158:bat_thread_kthr]v=3803,i=0,t=25,soc=72,bcct:0:0 I:7000 Ibat:-403
  7555.  
  7556. [ 187.827148] <0>.(0)[158:bat_thread_kthr][Sync_Real] UI_SOC=72, SOC=71, counter = 4
  7557.  
  7558. [ 187.828152] <0>.(0)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  7559.  
  7560. [ 187.831140] <0>.(0)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  7561.  
  7562. [ 187.832723] <0>.(0)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  7563.  
  7564. [ 188.108988] AEE_MONITOR_SET[status]: 0x1
  7565.  
  7566. [ 189.109867] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7567.  
  7568. [ 190.688462] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7569.  
  7570. [ 191.111568] AEE_MONITOR_SET[status]: 0x1
  7571.  
  7572. [ 191.441667] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  7573.  
  7574. [ 192.112442] AEE_MONITOR_SET[status]: 0x1
  7575.  
  7576. [ 192.293273] <1>.(1)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3796(mV) * 5500(mA) = 20878(mW)
  7577.  
  7578. [ 193.113266] AEE_MONITOR_SET[status]: 0x1
  7579.  
  7580. [ 193.698439] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7581.  
  7582. [ 194.114111] AEE_MONITOR_SET[status]: 0x1
  7583.  
  7584. [ 195.115083] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7585.  
  7586. [ 196.708548] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7587.  
  7588. [ 197.117224] AEE_MONITOR_SET[status]: 0x1
  7589.  
  7590. [ 197.801172] <0>.(0)[158:bat_thread_kthr][BAT_thread]Cable out
  7591.  
  7592. [ 197.801956] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  7593.  
  7594. [ 197.802892] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  7595.  
  7596. [ 197.802958] <0>.(1)[6:kworker/u8:0][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  7597.  
  7598. [ 197.803004] <0>.(1)[6:kworker/u8:0][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  7599.  
  7600. [ 197.803017] <0>.(1)[6:kworker/u8:0][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  7601.  
  7602. [ 197.803103] <0>-(1)[6:kworker/u8:0][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  7603.  
  7604. [ 197.803113] <0>-(1)[6:kworker/u8:0][MUSB]do_connection_work 463: in uart mode, return
  7605.  
  7606. [ 197.821745] <0>.(0)[158:bat_thread_kthr][FGADC] 0,3953,-20,3937,72,71,72,1428,1428,128,0,0,1000,3802,1000,28,29,101,103
  7607.  
  7608. [ 197.823468] <0>.(0)[158:bat_thread_kthr]AvgVbat=(3801,3802),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(71,71),UI_SOC=72,ZCV=3937,CHR_Type=0 bcct:0:0 I:7000 Ibat:-400
  7609.  
  7610. [ 197.825276] <0>.(0)[158:bat_thread_kthr]v=3802,i=0,t=25,soc=72,bcct:0:0 I:7000 Ibat:-400
  7611.  
  7612. [ 197.826349] <0>.(0)[158:bat_thread_kthr][Sync_Real] UI_SOC=72, SOC=71, counter = 5
  7613.  
  7614. [ 197.827534] <0>.(0)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  7615.  
  7616. [ 197.828735] <0>.(0)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  7617.  
  7618. [ 197.829756] <0>.(0)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  7619.  
  7620. [ 198.118100] AEE_MONITOR_SET[status]: 0x1
  7621.  
  7622. [ 199.119095] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 199.718436] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7623.  
  7624. [ 200.120232] AEE_MONITOR_SET[status]: 0x1
  7625.  
  7626. [ 201.121125] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 201.442307] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  7627.  
  7628. [ 201.918393] <1>.(1)[162:wdtk-1][WDK]: kick Ex WDT,RT[201918373942]
  7629.  
  7630. [ 202.122225] AEE_MONITOR_SET[status]: 0x1
  7631.  
  7632. [ 202.396728] <1>.(1)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3797(mV) * 5500(mA) = 20883(mW)
  7633.  
  7634. [ 202.728402] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7635.  
  7636. [ 203.123095] AEE_MONITOR_SET[status]: 0x1
  7637.  
  7638. [ 204.124038] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7639.  
  7640. [ 205.738460] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7641.  
  7642. [ 206.125808] AEE_MONITOR_SET[status]: 0x1
  7643.  
  7644. [ 207.126824] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 207.801224] <0>.(0)[158:bat_thread_kthr][BAT_thread]Cable out
  7645.  
  7646. [ 207.802361] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  7647.  
  7648. [ 207.803330] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  7649.  
  7650. [ 207.803362] <0>.(1)[144:kworker/u8:3][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  7651.  
  7652. [ 207.803391] <0>.(1)[144:kworker/u8:3][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  7653.  
  7654. [ 207.803405] <0>.(1)[144:kworker/u8:3][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  7655.  
  7656. [ 207.803491] <0>-(1)[144:kworker/u8:3][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  7657.  
  7658. [ 207.803502] <0>-(1)[144:kworker/u8:3][MUSB]do_connection_work 463: in uart mode, return
  7659.  
  7660. [ 207.822019] <1>.(1)[158:bat_thread_kthr][FGADC] 0,4011,-22,3937,72,71,72,1428,1428,130,0,0,1000,3800,1000,28,29,101,103
  7661.  
  7662. [ 207.823672] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3801,3800),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(71,71),UI_SOC=72,ZCV=3937,CHR_Type=0 bcct:0:0 I:7000 Ibat:-401
  7663.  
  7664. [ 207.825478] <1>.(1)[158:bat_thread_kthr]v=3800,i=0,t=25,soc=72,bcct:0:0 I:7000 Ibat:-401
  7665.  
  7666. [ 207.826565] <1>.(1)[158:bat_thread_kthr][Sync_Real] UI_SOC=72, SOC=71, counter = 6
  7667.  
  7668. [ 207.827531] <1>.(1)[158:bat_thread_kthr]UI_SOC=(72), resetBatteryMeter=(0)
  7669.  
  7670. [ 207.828570] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 72
  7671.  
  7672. [ 207.829907] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  7673.  
  7674. [ 208.127954] AEE_MONITOR_SET[status]: 0x1
  7675.  
  7676. [ 208.748401] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7677.  
  7678. [ 209.128824] AEE_MONITOR_SET[status]: 0x1
  7679.  
  7680. [ 210.130024] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7681.  
  7682. [ 211.358403] <1>.(1)[134:hang_detect][Hang_Detect] hang_detect disabled.
  7683.  
  7684. [ 211.418273] <0>-(0)[0:swapper/0][Power/swap]CNT(dpidle,rgidle): [0] = (0,1497564), [1] = (0,1510564), [2] = (0,27770), [3] = (0,7956),
  7685.  
  7686. [ 211.419820] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_cnt: [by_cpu] = 464693, [by_clk] = 0, [by_tmr] = 0, [by_oth] = 0, [by_vtg] = 0,
  7687.  
  7688. [ 211.421376] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_mask: 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
  7689.  
  7690. [ 211.443349] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  7691.  
  7692. [ 211.758428] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7693.  
  7694. [ 212.131797] AEE_MONITOR_SET[status]: 0x1
  7695.  
  7696. [ 212.496473] <1>.(1)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3795(mV) * 5500(mA) = 20872(mW)
  7697.  
  7698. [ 213.132659] AEE_MONITOR_SET[status]: 0x1
  7699.  
  7700. [ 214.133523] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 214.768409] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7701.  
  7702. [ 215.134651] AEE_MONITOR_SET[status]: 0x1
  7703.  
  7704. [ 216.135617] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7705.  
  7706. [ 217.778436] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7707.  
  7708. [ 217.801276] <1>.(1)[158:bat_thread_kthr][BAT_thread]Cable out
  7709.  
  7710. [ 217.802061] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  7711.  
  7712. [ 217.803003] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  7713.  
  7714. [ 217.803057] <1>.(0)[144:kworker/u8:3][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  7715.  
  7716. [ 217.803081] <1>.(0)[144:kworker/u8:3][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  7717.  
  7718. [ 217.803094] <1>.(0)[144:kworker/u8:3][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  7719.  
  7720. [ 217.803181] <1>-(0)[144:kworker/u8:3][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  7721.  
  7722. [ 217.803191] <1>-(0)[144:kworker/u8:3][MUSB]do_connection_work 463: in uart mode, return
  7723.  
  7724. [ 217.821095] <1>.(1)[158:bat_thread_kthr][FGADC] 0,4017,-22,3936,72,71,72,1428,1428,130,0,0,1000,3801,1000,28,29,101,103
  7725.  
  7726. [ 217.822703] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3801,3801),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(71,71),UI_SOC=72,ZCV=3936,CHR_Type=0 bcct:0:0 I:7000 Ibat:-402
  7727.  
  7728. [ 217.824782] <1>.(1)[158:bat_thread_kthr]v=3801,i=0,t=25,soc=72,bcct:0:0 I:7000 Ibat:-402
  7729.  
  7730. [ 217.826218] <1>.(1)[158:bat_thread_kthr][Sync_Real] UI_SOC=71, SOC=71, counter = 0
  7731.  
  7732. [ 217.827630] <1>.(1)[158:bat_thread_kthr]UI_SOC=(71), resetBatteryMeter=(0)
  7733.  
  7734. [ 217.828837] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 71
  7735.  
  7736. [ 217.831098] <0>.(0)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  7737.  
  7738. [ 217.833172] <1>.(1)[235:healthd]healthd: Unknown battery status '3'
  7739.  
  7740. [ 217.836119] <0>.(0)[235:healthd]healthd: battery l=71 v=3801 t=24.0 h=2 st=4 chg=
  7741.  
  7742. [ 217.837108] <0>.(0)[235:healthd]healthd: battery l=71 v=3801 t=24.0 h=2 st=4 chg=
  7743.  
  7744. [ 217.838188] <0>.(0)[235:healthd]healthd: send_already = 0
  7745.  
  7746. [ 218.137344] AEE_MONITOR_SET[status]: 0x1
  7747.  
  7748. [ 219.138207] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7749.  
  7750. [ 220.788418] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7751.  
  7752. [ 221.140623] AEE_MONITOR_SET[status]: 0x1
  7753.  
  7754. [ 221.444332] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  7755.  
  7756. [ 221.928420] <1>.(1)[162:wdtk-1][WDK]: kick Ex WDT,RT[221928397912]
  7757.  
  7758. [ 222.141524] AEE_MONITOR_SET[status]: 0x1
  7759.  
  7760. [ 222.598387] <1>.(1)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3792(mV) * 5500(mA) = 20856(mW)
  7761.  
  7762. [ 223.142341] AEE_MONITOR_SET[status]: 0x1
  7763.  
  7764. [ 223.798425] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7765.  
  7766. [ 224.143153] AEE_MONITOR_SET[status]: 0x1
  7767.  
  7768. [ 225.143949] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7769.  
  7770. [ 226.808422] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7771.  
  7772. [ 227.145817] AEE_MONITOR_SET[status]: 0x1
  7773.  
  7774. [ 227.801325] <1>.(1)[158:bat_thread_kthr][BAT_thread]Cable out
  7775.  
  7776. [ 227.802143] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  7777.  
  7778. [ 227.803085] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  7779.  
  7780. [ 227.803151] <1>.(0)[6:kworker/u8:0][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  7781.  
  7782. [ 227.803203] <1>.(0)[6:kworker/u8:0][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  7783.  
  7784. [ 227.803217] <1>.(0)[6:kworker/u8:0][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  7785.  
  7786. [ 227.803304] <1>-(0)[6:kworker/u8:0][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  7787.  
  7788. [ 227.803314] <1>-(0)[6:kworker/u8:0][MUSB]do_connection_work 463: in uart mode, return
  7789.  
  7790. [ 227.821838] <1>.(1)[158:bat_thread_kthr][FGADC] 0,4046,-24,3935,72,71,72,1428,1428,131,0,0,1000,3799,1000,28,29,101,103
  7791.  
  7792. [ 227.823456] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3801,3799),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(71,71),UI_SOC=71,ZCV=3935,CHR_Type=0 bcct:0:0 I:7000 Ibat:-405
  7793.  
  7794. [ 227.825307] <1>.(1)[158:bat_thread_kthr]v=3799,i=0,t=25,soc=71,bcct:0:0 I:7000 Ibat:-405
  7795.  
  7796. [ 227.826343] <1>.(1)[158:bat_thread_kthr]UI_SOC=(71), resetBatteryMeter=(0)
  7797.  
  7798. [ 227.827524] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 71
  7799.  
  7800. [ 227.828596] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  7801.  
  7802. [ 228.146721] AEE_MONITOR_SET[status]: 0x1
  7803.  
  7804. [ 229.148003] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 229.818432] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7805.  
  7806. [ 230.149232] AEE_MONITOR_SET[status]: 0x1
  7807.  
  7808. [ 231.150260] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 231.448288] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  7809.  
  7810. [ 232.151338] AEE_MONITOR_SET[status]: 0x1
  7811.  
  7812. [ 232.698412] <0>.(0)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3794(mV) * 5500(mA) = 20867(mW)
  7813.  
  7814. [ 232.828374] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7815.  
  7816. [ 233.152118] AEE_MONITOR_SET[status]: 0x1
  7817.  
  7818. [ 234.153263] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7819.  
  7820. [ 235.838401] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7821.  
  7822. [ 236.155090] AEE_MONITOR_SET[status]: 0x1
  7823.  
  7824. [ 237.156224] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 237.801363] <1>.(1)[158:bat_thread_kthr][BAT_thread]Cable out
  7825.  
  7826. [ 237.802135] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  7827.  
  7828. [ 237.803083] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  7829.  
  7830. [ 237.803158] <1>.(0)[102:kworker/u8:1][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  7831.  
  7832. [ 237.803204] <1>.(0)[102:kworker/u8:1][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  7833.  
  7834. [ 237.803217] <1>.(0)[102:kworker/u8:1][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  7835.  
  7836. [ 237.803302] <1>-(0)[102:kworker/u8:1][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  7837.  
  7838. [ 237.803312] <1>-(0)[102:kworker/u8:1][MUSB]do_connection_work 463: in uart mode, return
  7839.  
  7840. [ 237.820420] <0>.(0)[158:bat_thread_kthr][FGADC] 0,4001,-24,3935,72,71,72,1428,1428,130,0,0,1000,3799,1000,28,29,101,103
  7841.  
  7842. [ 237.822221] <0>.(0)[158:bat_thread_kthr]AvgVbat=(3801,3799),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(71,71),UI_SOC=71,ZCV=3935,CHR_Type=0 bcct:0:0 I:7000 Ibat:-392
  7843.  
  7844. [ 237.824037] <0>.(0)[158:bat_thread_kthr]v=3799,i=0,t=25,soc=71,bcct:0:0 I:7000 Ibat:-392
  7845.  
  7846. [ 237.825067] <0>.(0)[158:bat_thread_kthr]UI_SOC=(71), resetBatteryMeter=(0)
  7847.  
  7848. [ 237.826019] <0>.(0)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 71
  7849.  
  7850. [ 237.827039] <0>.(0)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  7851.  
  7852. [ 238.157302] AEE_MONITOR_SET[status]: 0x1
  7853.  
  7854. [ 238.848416] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7855.  
  7856. [ 239.158107] AEE_MONITOR_SET[status]: 0x1
  7857.  
  7858. [ 240.159170] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7859.  
  7860. [ 241.368437] <0>.(0)[134:hang_detect][Hang_Detect] hang_detect disabled.
  7861.  
  7862. [ 241.424291] <0>-(0)[0:swapper/0][Power/swap]CNT(dpidle,rgidle): [0] = (0,1729341), [1] = (0,1743683), [2] = (0,27770), [3] = (0,7956),
  7863.  
  7864. [ 241.425839] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_cnt: [by_cpu] = 464864, [by_clk] = 0, [by_tmr] = 0, [by_oth] = 0, [by_vtg] = 0,
  7865.  
  7866. [ 241.427394] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_mask: 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
  7867.  
  7868. [ 241.449345] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  7869.  
  7870. [ 241.858392] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7871.  
  7872. [ 241.938376] <1>.(1)[162:wdtk-1][WDK]: kick Ex WDT,RT[241938353575]
  7873.  
  7874. [ 242.161019] AEE_MONITOR_SET[status]: 0x1
  7875.  
  7876. [ 242.798595] <1>.(1)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3794(mV) * 5500(mA) = 20867(mW)
  7877.  
  7878. [ 243.162127] AEE_MONITOR_SET[status]: 0x1
  7879.  
  7880. [ 244.162999] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 244.868431] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7881.  
  7882. [ 245.164096] AEE_MONITOR_SET[status]: 0x1
  7883.  
  7884. [ 246.165271] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7885.  
  7886. [ 247.801421] <0>.(0)[158:bat_thread_kthr][BAT_thread]Cable out
  7887.  
  7888. [ 247.802207] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  7889.  
  7890. [ 247.803149] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  7891.  
  7892. [ 247.803213] <0>.(1)[144:kworker/u8:3][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  7893.  
  7894. [ 247.803238] <0>.(1)[144:kworker/u8:3][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  7895.  
  7896. [ 247.803251] <0>.(1)[144:kworker/u8:3][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  7897.  
  7898. [ 247.803337] <0>-(1)[144:kworker/u8:3][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  7899.  
  7900. [ 247.803347] <0>-(1)[144:kworker/u8:3][MUSB]do_connection_work 463: in uart mode, return
  7901.  
  7902. [ 247.823074] <1>.(1)[158:bat_thread_kthr][FGADC] 0,4078,-26,3935,72,71,72,1428,1428,132,0,0,1000,3799,1000,28,29,101,103
  7903.  
  7904. [ 247.824667] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3801,3799),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(71,71),UI_SOC=71,ZCV=3935,CHR_Type=0 bcct:0:0 I:7000 Ibat:-407
  7905.  
  7906. [ 247.826462] <1>.(1)[158:bat_thread_kthr]v=3799,i=0,t=25,soc=71,bcct:0:0 I:7000 Ibat:-407
  7907.  
  7908. [ 247.827498] <1>.(1)[158:bat_thread_kthr]UI_SOC=(71), resetBatteryMeter=(0)
  7909.  
  7910. [ 247.828787] <0>.(0)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 71
  7911.  
  7912. [ 247.829741] <0>.(0)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  7913.  
  7914. [ 247.878413] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7915.  
  7916. [ 248.167161] AEE_MONITOR_SET[status]: 0x1
  7917.  
  7918. [ 249.168092] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7919.  
  7920. [ 250.888455] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7921.  
  7922. [ 251.170175] AEE_MONITOR_SET[status]: 0x1
  7923.  
  7924. [ 251.450312] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  7925.  
  7926. [ 252.171078] AEE_MONITOR_SET[status]: 0x1
  7927.  
  7928. [ 252.899730] <0>.(0)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3793(mV) * 5500(mA) = 20861(mW)
  7929.  
  7930. [ 253.171985] AEE_MONITOR_SET[status]: 0x1
  7931.  
  7932. [ 253.898916] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7933.  
  7934. [ 254.172827] AEE_MONITOR_SET[status]: 0x1
  7935.  
  7936. [ 255.173687] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7937.  
  7938. [ 256.908691] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7939.  
  7940. [ 257.176148] AEE_MONITOR_SET[status]: 0x1
  7941.  
  7942. [ 257.801466] <1>.(1)[158:bat_thread_kthr][BAT_thread]Cable out
  7943.  
  7944. [ 257.802266] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  7945.  
  7946. [ 257.803209] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  7947.  
  7948. [ 257.803372] <1>.(0)[6:kworker/u8:0][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  7949.  
  7950. [ 257.803398] <1>.(0)[6:kworker/u8:0][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  7951.  
  7952. [ 257.803412] <1>.(0)[6:kworker/u8:0][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  7953.  
  7954. [ 257.803498] <1>-(0)[6:kworker/u8:0][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  7955.  
  7956. [ 257.803509] <1>-(0)[6:kworker/u8:0][MUSB]do_connection_work 463: in uart mode, return
  7957.  
  7958. [ 257.823101] <1>.(1)[158:bat_thread_kthr][FGADC] 0,4052,-28,3935,72,71,72,1428,1428,131,0,0,1000,3801,1000,28,29,101,103
  7959.  
  7960. [ 257.824719] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3800,3801),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(71,71),UI_SOC=71,ZCV=3935,CHR_Type=0 bcct:0:0 I:7000 Ibat:-427
  7961.  
  7962. [ 257.826695] <0>.(0)[158:bat_thread_kthr]v=3801,i=0,t=25,soc=71,bcct:0:0 I:7000 Ibat:-427
  7963.  
  7964. [ 257.827725] <0>.(0)[158:bat_thread_kthr]UI_SOC=(71), resetBatteryMeter=(0)
  7965.  
  7966. [ 257.829528] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 71
  7967.  
  7968. [ 257.830504] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  7969.  
  7970. [ 257.834778] <0>.(0)[235:healthd]healthd: Unknown battery status '3'
  7971.  
  7972. [ 257.836403] <0>.(0)[235:healthd]healthd: battery l=71 v=3800 t=24.0 h=2 st=4 chg=
  7973.  
  7974. [ 257.837381] <0>.(0)[235:healthd]healthd: battery l=71 v=3800 t=24.0 h=2 st=4 chg=
  7975.  
  7976. [ 257.839212] <0>.(0)[235:healthd]healthd: send_already = 0
  7977.  
  7978. [ 258.176952] AEE_MONITOR_SET[status]: 0x1
  7979.  
  7980. [ 259.177790] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 259.918461] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7981.  
  7982. [ 260.178942] AEE_MONITOR_SET[status]: 0x1
  7983.  
  7984. [ 261.179866] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 261.451250] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  7985.  
  7986. [ 261.948423] <1>.(1)[162:wdtk-1][WDK]: kick Ex WDT,RT[261948404392]
  7987.  
  7988. [ 262.180995] AEE_MONITOR_SET[status]: 0x1
  7989.  
  7990. [ 262.928404] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7991.  
  7992. [ 263.002777] <1>.(1)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3793(mV) * 5500(mA) = 20861(mW)
  7993.  
  7994. [ 263.181840] AEE_MONITOR_SET[status]: 0x1
  7995.  
  7996. [ 264.182897] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  7997.  
  7998. [ 265.938449] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  7999.  
  8000. [ 266.184644] AEE_MONITOR_SET[status]: 0x1
  8001.  
  8002. [ 267.185557] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 267.801519] <0>.(0)[158:bat_thread_kthr][BAT_thread]Cable out
  8003.  
  8004. [ 267.802301] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  8005.  
  8006. [ 267.803250] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  8007.  
  8008. [ 267.803308] <0>.(1)[6:kworker/u8:0][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  8009.  
  8010. [ 267.803354] <0>.(1)[6:kworker/u8:0][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  8011.  
  8012. [ 267.803368] <0>.(1)[6:kworker/u8:0][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  8013.  
  8014. [ 267.803455] <0>-(1)[6:kworker/u8:0][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  8015.  
  8016. [ 267.803465] <0>-(1)[6:kworker/u8:0][MUSB]do_connection_work 463: in uart mode, return
  8017.  
  8018. [ 267.823276] <1>.(1)[158:bat_thread_kthr][FGADC] 0,4019,-28,3933,71,71,72,1428,1428,130,0,0,1000,3800,1000,28,29,101,103
  8019.  
  8020. [ 267.825015] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3800,3800),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(71,71),UI_SOC=71,ZCV=3933,CHR_Type=0 bcct:0:0 I:7000 Ibat:-403
  8021.  
  8022. [ 267.826825] <1>.(1)[158:bat_thread_kthr]v=3800,i=0,t=25,soc=71,bcct:0:0 I:7000 Ibat:-403
  8023.  
  8024. [ 267.827915] <1>.(1)[158:bat_thread_kthr]UI_SOC=(71), resetBatteryMeter=(0)
  8025.  
  8026. [ 267.829215] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 71
  8027.  
  8028. [ 267.830301] <0>.(0)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  8029.  
  8030. [ 268.186635] AEE_MONITOR_SET[status]: 0x1
  8031.  
  8032. [ 268.948423] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8033.  
  8034. [ 269.187484] AEE_MONITOR_SET[status]: 0x1
  8035.  
  8036. [ 270.188569] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  8037.  
  8038. [ 271.378406] <0>.(0)[134:hang_detect][Hang_Detect] hang_detect disabled.
  8039.  
  8040. [ 271.432131] <0>-(0)[0:swapper/0][Power/swap]CNT(dpidle,rgidle): [0] = (0,1954518), [1] = (0,1971738), [2] = (0,27770), [3] = (0,7956),
  8041.  
  8042. [ 271.433680] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_cnt: [by_cpu] = 453197, [by_clk] = 0, [by_tmr] = 0, [by_oth] = 0, [by_vtg] = 0,
  8043.  
  8044. [ 271.435236] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_mask: 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
  8045.  
  8046. [ 271.452298] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  8047.  
  8048. [ 271.958427] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8049.  
  8050. [ 272.191770] AEE_MONITOR_SET[status]: 0x1
  8051.  
  8052. [ 273.105208] <0>.(0)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3791(mV) * 5500(mA) = 20850(mW)
  8053.  
  8054. [ 273.192580] AEE_MONITOR_SET[status]: 0x1
  8055.  
  8056. [ 274.193399] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 274.968954] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8057.  
  8058. [ 275.194481] AEE_MONITOR_SET[status]: 0x1
  8059.  
  8060. [ 276.195321] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  8061.  
  8062. [ 277.801578] <1>.(1)[158:bat_thread_kthr][BAT_thread]Cable out
  8063.  
  8064. [ 277.802363] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  8065.  
  8066. [ 277.803563] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  8067.  
  8068. [ 277.803594] <1>.(0)[144:kworker/u8:3][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  8069.  
  8070. [ 277.803620] <1>.(0)[144:kworker/u8:3][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  8071.  
  8072. [ 277.803634] <1>.(0)[144:kworker/u8:3][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  8073.  
  8074. [ 277.803720] <1>-(0)[144:kworker/u8:3][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  8075.  
  8076. [ 277.803730] <1>-(0)[144:kworker/u8:3][MUSB]do_connection_work 463: in uart mode, return
  8077.  
  8078. [ 277.823942] <1>.(1)[158:bat_thread_kthr][FGADC] 0,4040,-30,3933,71,70,72,1428,1428,131,0,0,1000,3797,1000,28,30,101,103
  8079.  
  8080. [ 277.825571] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3800,3797),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(70,70),UI_SOC=71,ZCV=3933,CHR_Type=0 bcct:0:0 I:7000 Ibat:-405
  8081.  
  8082. [ 277.827409] <0>.(0)[158:bat_thread_kthr]v=3797,i=0,t=25,soc=71,bcct:0:0 I:7000 Ibat:-405
  8083.  
  8084. [ 277.828626] <0>.(0)[158:bat_thread_kthr][Sync_Real] UI_SOC=71, SOC=70, counter = 1
  8085.  
  8086. [ 277.830216] <0>.(0)[158:bat_thread_kthr]UI_SOC=(71), resetBatteryMeter=(0)
  8087.  
  8088. [ 277.831258] <0>.(0)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 71
  8089.  
  8090. [ 277.832220] <0>.(0)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  8091.  
  8092. [ 277.978439] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8093.  
  8094. [ 278.197378] AEE_MONITOR_SET[status]: 0x1
  8095.  
  8096. [ 279.198273] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  8097.  
  8098. [ 280.988407] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8099.  
  8100. [ 281.200461] AEE_MONITOR_SET[status]: 0x1
  8101.  
  8102. [ 281.453345] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  8103.  
  8104. [ 281.958423] <1>.(1)[162:wdtk-1][WDK]: kick Ex WDT,RT[281958403363]
  8105.  
  8106. [ 282.201514] AEE_MONITOR_SET[status]: 0x1
  8107.  
  8108. [ 283.202395] AEE_MONITOR_SET[status]: 0x1
  8109.  
  8110. [ 283.205812] <1>.(1)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3789(mV) * 5500(mA) = 20839(mW)
  8111.  
  8112. [ 283.998431] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8113.  
  8114. [ 284.203203] AEE_MONITOR_SET[status]: 0x1
  8115.  
  8116. [ 284.392636] <0>.(0)[0:swapper/0]kpd: kpd: register = f7fb dfef 7fbf feff fd
  8117.  
  8118. [ 284.393546] <0>.(0)[0:swapper/0]kpd: (pressed) HW keycode = 2
  8119.  
  8120. [ 284.394286] <0>.(0)[0:swapper/0]kpd: report Linux keycode = 115
  8121.  
  8122. [ 284.395029] <0>.(0)[0:swapper/0]kpd: (pressed) HW keycode = 11
  8123.  
  8124. [ 284.395778] <0>.(0)[0:swapper/0]kpd: Linux keycode = 0
  8125.  
  8126. [ 284.396445] <0>.(0)[0:swapper/0]kpd: (pressed) HW keycode = 20
  8127.  
  8128. [ 284.397176] <0>.(0)[0:swapper/0]kpd: Linux keycode = 0
  8129.  
  8130. [ 284.397820] <0>.(0)[0:swapper/0]kpd: (pressed) HW keycode = 29
  8131.  
  8132. [ 284.398591] <0>.(0)[0:swapper/0]kpd: Linux keycode = 0
  8133.  
  8134. [ 284.399238] <0>.(0)[0:swapper/0]kpd: (pressed) HW keycode = 38
  8135.  
  8136. [ 284.399968] <0>.(0)[0:swapper/0]kpd: Linux keycode = 0
  8137.  
  8138. [ 284.400613] <0>.(0)[0:swapper/0]kpd: (pressed) HW keycode = 47
  8139.  
  8140. [ 284.401343] <0>.(0)[0:swapper/0]kpd: Linux keycode = 0
  8141.  
  8142. [ 284.401988] <0>.(0)[0:swapper/0]kpd: (pressed) HW keycode = 56
  8143.  
  8144. [ 284.402760] <0>.(0)[0:swapper/0]kpd: Linux keycode = 0
  8145.  
  8146. [ 284.403408] <0>.(0)[0:swapper/0]kpd: (pressed) HW keycode = 65
  8147.  
  8148. [ 284.404162] <0>.(0)[0:swapper/0]kpd: Linux keycode = 0
  8149.  
  8150. [ 284.404810] <0>.(0)[0:swapper/0]kpd: save new keymap state
  8151.  
  8152. [ 284.642550] <1>.(1)[219:teei_daemon]kpd: kpd: register = ffff ffff ffff ffff ff
  8153.  
  8154. [ 284.643492] <1>.(1)[219:teei_daemon]kpd: (released) HW keycode = 2
  8155.  
  8156. [ 284.644311] <1>.(1)[219:teei_daemon]kpd: report Linux keycode = 115
  8157.  
  8158. [ 284.645099] <1>.(1)[219:teei_daemon]kpd: (released) HW keycode = 11
  8159.  
  8160. [ 284.645882] <1>.(1)[219:teei_daemon]kpd: Linux keycode = 0
  8161.  
  8162. [ 284.646570] <1>.(1)[219:teei_daemon]kpd: (released) HW keycode = 20
  8163.  
  8164. [ 284.647354] <1>.(1)[219:teei_daemon]kpd: Linux keycode = 0
  8165.  
  8166. [ 284.648042] <1>.(1)[219:teei_daemon]kpd: (released) HW keycode = 29
  8167.  
  8168. [ 284.648875] <1>.(1)[219:teei_daemon]kpd: Linux keycode = 0
  8169.  
  8170. [ 284.649604] <1>.(1)[219:teei_daemon]kpd: (released) HW keycode = 38
  8171.  
  8172. [ 284.650391] <1>.(1)[219:teei_daemon]kpd: Linux keycode = 0
  8173.  
  8174. [ 284.651079] <1>.(1)[219:teei_daemon]kpd: (released) HW keycode = 47
  8175.  
  8176. [ 284.651862] <1>.(1)[219:teei_daemon]kpd: Linux keycode = 0
  8177.  
  8178. [ 284.652567] <1>.(1)[219:teei_daemon]kpd: (released) HW keycode = 56
  8179.  
  8180. [ 284.653353] <1>.(1)[219:teei_daemon]kpd: Linux keycode = 0
  8181.  
  8182. [ 284.654041] <1>.(1)[219:teei_daemon]kpd: (released) HW keycode = 65
  8183.  
  8184. [ 284.654824] <1>.(1)[219:teei_daemon]kpd: Linux keycode = 0
  8185.  
  8186. [ 284.655511] <1>.(1)[219:teei_daemon]kpd: save new keymap state
  8187.  
  8188. [ 285.204071] AEE_MONITOR_SET[status]: 0x1
  8189.  
  8190. [ 285.394158] <0>.(0)[0:swapper/0]kpd: kpd: register = fbfd eff7 bfdf ff7f fe
  8191.  
  8192. [ 285.395070] <0>.(0)[0:swapper/0]kpd: (pressed) HW keycode = 1
  8193.  
  8194. [ 285.395807] <0>.(0)[0:swapper/0]kpd: report Linux keycode = 114
  8195.  
  8196. [ 285.396551] <0>.(0)[0:swapper/0]kpd: (pressed) HW keycode = 10
  8197.  
  8198. [ 285.397281] <0>.(0)[0:swapper/0]kpd: Linux keycode = 0
  8199.  
  8200. [ 285.397927] <0>.(0)[0:swapper/0]kpd: (pressed) HW keycode = 19
  8201.  
  8202. [ 285.398722] <0>.(0)[0:swapper/0]kpd: Linux keycode = 0
  8203.  
  8204. [ 285.399371] <0>.(0)[0:swapper/0]kpd: (pressed) HW keycode = 28
  8205.  
  8206. [ 285.400101] <0>.(0)[0:swapper/0]kpd: Linux keycode = 0
  8207.  
  8208. [ 285.400747] <0>.(0)[0:swapper/0]kpd: (pressed) HW keycode = 37
  8209.  
  8210. [ 285.401477] <0>.(0)[0:swapper/0]kpd: Linux keycode = 0
  8211.  
  8212. [ 285.402123] <0>.(0)[0:swapper/0]kpd: (pressed) HW keycode = 46
  8213.  
  8214. [ 285.402853] <0>.(0)[0:swapper/0]kpd: Linux keycode = 0
  8215.  
  8216. [ 285.403499] <0>.(0)[0:swapper/0]kpd: (pressed) HW keycode = 55
  8217.  
  8218. [ 285.404228] <0>.(0)[0:swapper/0]kpd: Linux keycode = 0
  8219.  
  8220. [ 285.404873] <0>.(0)[0:swapper/0]kpd: (pressed) HW keycode = 64
  8221.  
  8222. [ 285.405602] <0>.(0)[0:swapper/0]kpd: Linux keycode = 0
  8223.  
  8224. [ 285.406245] <0>.(0)[0:swapper/0]kpd: save new keymap state
  8225.  
  8226. [ 285.685286] <1>.(1)[219:teei_daemon]kpd: kpd: register = ffff ffff ffff ffff ff
  8227.  
  8228. [ 285.686237] <1>.(1)[219:teei_daemon]kpd: (released) HW keycode = 1
  8229.  
  8230. [ 285.687031] <1>.(1)[219:teei_daemon]kpd: report Linux keycode = 114
  8231.  
  8232. [ 285.687817] <1>.(1)[219:teei_daemon]kpd: (released) HW keycode = 10
  8233.  
  8234. [ 285.688651] <1>.(1)[219:teei_daemon]kpd: Linux keycode = 0
  8235.  
  8236. [ 285.689343] <1>.(1)[219:teei_daemon]kpd: (released) HW keycode = 19
  8237.  
  8238. [ 285.690126] <1>.(1)[219:teei_daemon]kpd: Linux keycode = 0
  8239.  
  8240. [ 285.690814] <1>.(1)[219:teei_daemon]kpd: (released) HW keycode = 28
  8241.  
  8242. [ 285.691597] <1>.(1)[219:teei_daemon]kpd: Linux keycode = 0
  8243.  
  8244. [ 285.692285] <1>.(1)[219:teei_daemon]kpd: (released) HW keycode = 37
  8245.  
  8246. [ 285.693069] <1>.(1)[219:teei_daemon]kpd: Linux keycode = 0
  8247.  
  8248. [ 285.693756] <1>.(1)[219:teei_daemon]kpd: (released) HW keycode = 46
  8249.  
  8250. [ 285.694541] <1>.(1)[219:teei_daemon]kpd: Linux keycode = 0
  8251.  
  8252. [ 285.695228] <1>.(1)[219:teei_daemon]kpd: (released) HW keycode = 55
  8253.  
  8254. [ 285.696012] <1>.(1)[219:teei_daemon]kpd: Linux keycode = 0
  8255.  
  8256. [ 285.696701] <1>.(1)[219:teei_daemon]kpd: (released) HW keycode = 64
  8257.  
  8258. [ 285.697485] <1>.(1)[219:teei_daemon]kpd: Linux keycode = 0
  8259.  
  8260. [ 285.698171] <1>.(1)[219:teei_daemon]kpd: save new keymap state
  8261.  
  8262. [ 286.204933] AEE_MONITOR_SET[status]: 0x1
  8263.  
  8264. [ 286.258579] <1>.(1)[53:pmic_thread][PMIC] [PMIC_INT] addr[0x2c4]=0x1
  8265.  
  8266. [ 286.259405] <1>.(1)[53:pmic_thread]kpd: Power Key generate, pressed=1
  8267.  
  8268. [ 286.260235] <1>.(1)[53:pmic_thread]kpd: kpd: (pressed) HW keycode =116 using PMIC
  8269.  
  8270. [ 286.261207] <1>.(1)[53:pmic_thread][PWRAP] clear EINT flag mt_pmic_wrap_eint_status=0x0
  8271.  
  8272. [ 286.488422] <0>.(0)[53:pmic_thread][PMIC] [PMIC_INT] addr[0x2c4]=0x4
  8273.  
  8274. [ 286.489237] <0>.(0)[53:pmic_thread]kpd: Power Key generate, pressed=0
  8275.  
  8276. [ 286.490065] <0>.(0)[53:pmic_thread]kpd: kpd: (released) HW keycode =116 using PMIC
  8277.  
  8278. [ 286.491046] <0>.(0)[53:pmic_thread][PWRAP] clear EINT flag mt_pmic_wrap_eint_status=0x0
  8279.  
  8280. [ 287.008446] <0>.(0)[53:pmic_thread][PMIC] [PMIC_INT] addr[0x2c4]=0x1
  8281.  
  8282. [ 287.009264] <0>.(0)[53:pmic_thread]kpd: Power Key generate, pressed=1
  8283.  
  8284. [ 287.010098] <0>.(0)[53:pmic_thread]kpd: kpd: (pressed) HW keycode =116 using PMIC
  8285.  
  8286. [ 287.011071] <0>.(0)[53:pmic_thread][PWRAP] clear EINT flag mt_pmic_wrap_eint_status=0x0
  8287.  
  8288. [ 287.013145] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8289.  
  8290. [ 287.198430] <0>.(0)[53:pmic_thread][PMIC] [PMIC_INT] addr[0x2c4]=0x4
  8291.  
  8292. [ 287.199248] <0>.(0)[53:pmic_thread]kpd: Power Key generate, pressed=0
  8293.  
  8294. [ 287.200077] <0>.(0)[53:pmic_thread]kpd: kpd: (released) HW keycode =116 using PMIC
  8295.  
  8296. [ 287.201059] <0>.(0)[53:pmic_thread][PWRAP] clear EINT flag mt_pmic_wrap_eint_status=0x0
  8297.  
  8298. [ 287.205796] AEE_MONITOR_SET[status]: 0x1
  8299.  
  8300. [ 287.801639] <0>.(0)[158:bat_thread_kthr][BAT_thread]Cable out
  8301.  
  8302. [ 287.802456] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  8303.  
  8304. [ 287.803403] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  8305.  
  8306. [ 287.803465] <0>.(1)[144:kworker/u8:3][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  8307.  
  8308. [ 287.803513] <0>.(1)[144:kworker/u8:3][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  8309.  
  8310. [ 287.803526] <0>.(1)[144:kworker/u8:3][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  8311.  
  8312. [ 287.803608] <0>-(1)[144:kworker/u8:3][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  8313.  
  8314. [ 287.803618] <0>-(1)[144:kworker/u8:3][MUSB]do_connection_work 463: in uart mode, return
  8315.  
  8316. [ 287.821942] <1>.(1)[158:bat_thread_kthr][FGADC] 0,4023,-30,3932,71,70,72,1428,1428,131,0,0,1000,3795,1000,28,30,101,103
  8317.  
  8318. [ 287.823600] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3800,3795),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(70,70),UI_SOC=71,ZCV=3932,CHR_Type=0 bcct:0:0 I:7000 Ibat:-403
  8319.  
  8320. [ 287.825435] <1>.(1)[158:bat_thread_kthr]v=3795,i=0,t=25,soc=71,bcct:0:0 I:7000 Ibat:-403
  8321.  
  8322. [ 287.826829] <1>.(1)[158:bat_thread_kthr][Sync_Real] UI_SOC=71, SOC=70, counter = 2
  8323.  
  8324. [ 287.827805] <1>.(1)[158:bat_thread_kthr]UI_SOC=(71), resetBatteryMeter=(0)
  8325.  
  8326. [ 287.828968] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 71
  8327.  
  8328. [ 287.829987] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  8329.  
  8330. [ 287.928404] <0>.(0)[53:pmic_thread][PMIC] [PMIC_INT] addr[0x2c4]=0x1
  8331.  
  8332. [ 287.929240] <0>.(0)[53:pmic_thread]kpd: Power Key generate, pressed=1
  8333.  
  8334. [ 287.930071] <0>.(0)[53:pmic_thread]kpd: kpd: (pressed) HW keycode =116 using PMIC
  8335.  
  8336. [ 287.931050] <0>.(0)[53:pmic_thread][PWRAP] clear EINT flag mt_pmic_wrap_eint_status=0x0
  8337.  
  8338. [ 288.098455] <0>.(0)[53:pmic_thread][PMIC] [PMIC_INT] addr[0x2c4]=0x4
  8339.  
  8340. [ 288.099273] <0>.(0)[53:pmic_thread]kpd: Power Key generate, pressed=0
  8341.  
  8342. [ 288.100105] <0>.(0)[53:pmic_thread]kpd: kpd: (released) HW keycode =116 using PMIC
  8343.  
  8344. [ 288.101090] <0>.(0)[53:pmic_thread][PWRAP] clear EINT flag mt_pmic_wrap_eint_status=0x0
  8345.  
  8346. [ 288.206638] AEE_MONITOR_SET[status]: 0x1
  8347.  
  8348. [ 288.818461] <1>.(1)[53:pmic_thread][PMIC] [PMIC_INT] addr[0x2c4]=0x1
  8349.  
  8350. [ 288.819290] <1>.(1)[53:pmic_thread]kpd: Power Key generate, pressed=1
  8351.  
  8352. [ 288.820135] <1>.(1)[53:pmic_thread]kpd: kpd: (pressed) HW keycode =116 using PMIC
  8353.  
  8354. [ 288.821147] <1>.(1)[53:pmic_thread][PWRAP] clear EINT flag mt_pmic_wrap_eint_status=0x0
  8355.  
  8356. [ 289.048448] <0>.(0)[53:pmic_thread][PMIC] [PMIC_INT] addr[0x2c4]=0x4
  8357.  
  8358. [ 289.049268] <0>.(0)[53:pmic_thread]kpd: Power Key generate, pressed=0
  8359.  
  8360. [ 289.050100] <0>.(0)[53:pmic_thread]kpd: kpd: (released) HW keycode =116 using PMIC
  8361.  
  8362. [ 289.051136] <0>.(0)[53:pmic_thread][PWRAP] clear EINT flag mt_pmic_wrap_eint_status=0x0
  8363.  
  8364. [ 289.207499] AEE_MONITOR_SET[status]: 0x1
  8365.  
  8366. [ 289.928432] <0>.(0)[53:pmic_thread][PMIC] [PMIC_INT] addr[0x2c4]=0x1
  8367.  
  8368. [ 289.929272] <0>.(0)[53:pmic_thread]kpd: Power Key generate, pressed=1
  8369.  
  8370. [ 289.930101] <0>.(0)[53:pmic_thread]kpd: kpd: (pressed) HW keycode =116 using PMIC
  8371.  
  8372. [ 289.931074] <0>.(0)[53:pmic_thread][PWRAP] clear EINT flag mt_pmic_wrap_eint_status=0x0
  8373.  
  8374. [ 290.018472] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8375.  
  8376. [ 290.018484] <0>.(1)[53:pmic_thread][PMIC] [PMIC_INT] addr[0x2c4]=0x4
  8377.  
  8378. [ 290.018506] <0>.(1)[53:pmic_thread]kpd: Power Key generate, pressed=0
  8379.  
  8380. [ 290.018534] <0>.(1)[53:pmic_thread]kpd: kpd: (released) HW keycode =116 using PMIC
  8381.  
  8382. [ 290.018573] <0>.(1)[53:pmic_thread][PWRAP] clear EINT flag mt_pmic_wrap_eint_status=0x0
  8383.  
  8384. [ 290.208398] AEE_MONITOR_SET[status]: 0x1
  8385.  
  8386. [ 291.209343] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 291.454288] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  8387.  
  8388. [ 292.210559] AEE_MONITOR_SET[status]: 0x1
  8389.  
  8390. [ 293.028441] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8391.  
  8392. [ 293.211443] AEE_MONITOR_SET[status]: 0x1
  8393.  
  8394. [ 293.303131] <0>.(0)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3794(mV) * 5500(mA) = 20867(mW)
  8395.  
  8396. [ 294.212281] AEE_MONITOR_SET[status]: 0x1
  8397.  
  8398. [ 295.213166] AEE_MONITOR_SET[status]: 0x1
  8399.  
  8400. [ 296.038482] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8401.  
  8402. [ 296.214069] AEE_MONITOR_SET[status]: 0x1
  8403.  
  8404. [ 297.215028] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 297.801729] <1>.(1)[158:bat_thread_kthr][BAT_thread]Cable out
  8405.  
  8406. [ 297.802516] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  8407.  
  8408. [ 297.803501] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  8409.  
  8410. [ 297.803560] <1>.(0)[144:kworker/u8:3][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  8411.  
  8412. [ 297.803619] <1>.(0)[144:kworker/u8:3][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  8413.  
  8414. [ 297.803637] <1>.(0)[144:kworker/u8:3][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  8415.  
  8416. [ 297.803731] <1>-(0)[144:kworker/u8:3][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  8417.  
  8418. [ 297.803745] <1>-(0)[144:kworker/u8:3][MUSB]do_connection_work 463: in uart mode, return
  8419.  
  8420. [ 297.824463] <0>.(0)[158:bat_thread_kthr][FGADC] 0,4304,-32,3932,71,70,72,1428,1428,139,0,0,1000,3800,1000,28,30,101,103
  8421.  
  8422. [ 297.826101] <0>.(0)[158:bat_thread_kthr]AvgVbat=(3801,3800),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(70,70),UI_SOC=71,ZCV=3932,CHR_Type=0 bcct:0:0 I:7000 Ibat:-430
  8423.  
  8424. [ 297.827936] <0>.(0)[158:bat_thread_kthr]v=3800,i=0,t=25,soc=71,bcct:0:0 I:7000 Ibat:-430
  8425.  
  8426. [ 297.829464] <0>.(0)[158:bat_thread_kthr][Sync_Real] UI_SOC=71, SOC=70, counter = 3
  8427.  
  8428. [ 297.830805] <0>.(0)[158:bat_thread_kthr]UI_SOC=(71), resetBatteryMeter=(0)
  8429.  
  8430. [ 297.832413] <0>.(0)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 71
  8431.  
  8432. [ 297.833406] <0>.(0)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  8433.  
  8434. [ 297.835944] <0>.(0)[235:healthd]healthd: Unknown battery status '3'
  8435.  
  8436. [ 297.839143] <0>.(0)[235:healthd]healthd: battery l=71 v=3801 t=24.0 h=2 st=4 chg=
  8437.  
  8438. [ 297.840139] <0>.(0)[235:healthd]healthd: battery l=71 v=3801 t=24.0 h=2 st=4 chg=
  8439.  
  8440. [ 297.841258] <0>.(0)[235:healthd]healthd: send_already = 0
  8441.  
  8442. [ 298.216164] AEE_MONITOR_SET[status]: 0x1
  8443.  
  8444. [ 299.048394] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8445.  
  8446. [ 299.216987] AEE_MONITOR_SET[status]: 0x1
  8447.  
  8448. [ 300.217964] AEE_MONITOR_SET[status]: 0x1
  8449.  
  8450. [ 301.219020] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 301.388419] <1>.(1)[134:hang_detect][Hang_Detect] hang_detect disabled.
  8451.  
  8452. [ 301.438476] <0>-(0)[0:swapper/0][Power/swap]CNT(dpidle,rgidle): [0] = (0,2171525), [1] = (0,2192636), [2] = (0,27770), [3] = (0,7956),
  8453.  
  8454. [ 301.440036] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_cnt: [by_cpu] = 437887, [by_clk] = 0, [by_tmr] = 0, [by_oth] = 0, [by_vtg] = 0,
  8455.  
  8456. [ 301.441603] <0>-(0)[0:swapper/0][Power/swap]dpidle_block_mask: 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
  8457.  
  8458. [ 301.455283] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  8459.  
  8460. [ 301.968396] <1>.(1)[162:wdtk-1][WDK]: kick Ex WDT,RT[301968373257]
  8461.  
  8462. [ 302.058593] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8463.  
  8464. [ 302.220194] AEE_MONITOR_SET[status]: 0x1
  8465.  
  8466. [ 303.221138] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 303.403412] <0>.(0)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3793(mV) * 5500(mA) = 20861(mW)
  8467.  
  8468. [ 304.222278] AEE_MONITOR_SET[status]: 0x1
  8469.  
  8470. [ 305.068525] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8471.  
  8472. [ 305.223164] AEE_MONITOR_SET[status]: 0x1
  8473.  
  8474. [ 306.224136] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  8475.  
  8476. [ 307.801785] <1>.(1)[158:bat_thread_kthr][BAT_thread]Cable out
  8477.  
  8478. [ 307.802598] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  8479.  
  8480. [ 307.803554] <1>.(1)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  8481.  
  8482. [ 307.803624] <1>.(0)[6:kworker/u8:0][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  8483.  
  8484. [ 307.803654] <1>.(0)[6:kworker/u8:0][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  8485.  
  8486. [ 307.803672] <1>.(0)[6:kworker/u8:0][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  8487.  
  8488. [ 307.803764] <1>-(0)[6:kworker/u8:0][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  8489.  
  8490. [ 307.803778] <1>-(0)[6:kworker/u8:0][MUSB]do_connection_work 463: in uart mode, return
  8491.  
  8492. [ 307.821827] <1>.(1)[158:bat_thread_kthr][FGADC] 0,3991,-32,3931,71,70,72,1428,1428,129,0,0,1000,3798,1000,28,30,101,103
  8493.  
  8494. [ 307.823569] <1>.(1)[158:bat_thread_kthr]AvgVbat=(3802,3798),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(70,70),UI_SOC=71,ZCV=3931,CHR_Type=0 bcct:0:0 I:7000 Ibat:-399
  8495.  
  8496. [ 307.825393] <1>.(1)[158:bat_thread_kthr]v=3798,i=0,t=25,soc=71,bcct:0:0 I:7000 Ibat:-399
  8497.  
  8498. [ 307.826437] <1>.(1)[158:bat_thread_kthr][Sync_Real] UI_SOC=71, SOC=70, counter = 4
  8499.  
  8500. [ 307.827409] <1>.(1)[158:bat_thread_kthr]UI_SOC=(71), resetBatteryMeter=(0)
  8501.  
  8502. [ 307.829124] <1>.(1)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 71
  8503.  
  8504. [ 307.830125] <1>.(1)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  8505.  
  8506. [ 308.078488] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8507.  
  8508. [ 308.226050] AEE_MONITOR_SET[status]: 0x1
  8509.  
  8510. [ 309.226955] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1AEE_MONITOR_SET[status]: 0x1
  8511.  
  8512. [ 311.088421] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8513.  
  8514. [ 311.229036] AEE_MONITOR_SET[status]: 0x1
  8515.  
  8516. [ 311.456274] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  8517.  
  8518. [ 312.229924] AEE_MONITOR_SET[status]: 0x1
  8519.  
  8520. [ 313.230918] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 313.502565] <0>.(0)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3793(mV) * 5500(mA) = 20861(mW)
  8521.  
  8522. [ 314.098417] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8523.  
  8524. [ 314.232069] AEE_MONITOR_SET[status]: 0x1
  8525.  
  8526. [ 315.232893] AEE_MONITOR_SET[status]: 0x1
  8527.  
  8528. [ 316.233830] <0>.(0)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 317.108446] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8529.  
  8530. [ 317.234993] AEE_MONITOR_SET[status]: 0x1
  8531.  
  8532. [ 317.801838] <0>.(0)[158:bat_thread_kthr][BAT_thread]Cable out
  8533.  
  8534. [ 317.802900] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 519: issue work
  8535.  
  8536. [ 317.804076] <0>.(0)[158:bat_thread_kthr][MUSB]mt_usb_disconnect 521: [MUSB] USB disconnect
  8537.  
  8538. [ 317.805223] <1>.(1)[114:kworker/u8:2][MUSB]do_connection_work 431: is ready 1 is_host 0 power 0
  8539.  
  8540. [ 317.806369] <1>.(1)[114:kworker/u8:2][MUSB]usb_cable_connected 594: usb_cable_connected vbus_exist=0 type=0
  8541.  
  8542. [ 317.807616] <1>.(1)[114:kworker/u8:2][MUSB]usb_cable_connected 616: usb_cable_connected, connected:0, cable_mode:1
  8543.  
  8544. [ 317.809798] <1>-(1)[114:kworker/u8:2][MUSB]usb_phy_check_in_uart_mode 310: usb_phy_check_in_uart_mode:310 - IN UART MODE : 0x5e
  8545.  
  8546. [ 317.811251] <1>-(1)[114:kworker/u8:2][MUSB]do_connection_work 463: in uart mode, return
  8547.  
  8548. [ 317.819543] <0>.(0)[158:bat_thread_kthr][FGADC] 0,4017,-34,3931,71,70,72,1428,1428,130,0,0,1000,3800,1000,28,30,101,103
  8549.  
  8550. [ 317.821182] <0>.(0)[158:bat_thread_kthr]AvgVbat=(3802,3800),AvgI=(0,0),VChr=66,AvgT=(24,25),SOC=(70,70),UI_SOC=71,ZCV=3931,CHR_Type=0 bcct:0:0 I:7000 Ibat:-399
  8551.  
  8552. [ 317.823004] <0>.(0)[158:bat_thread_kthr]v=3800,i=0,t=25,soc=71,bcct:0:0 I:7000 Ibat:-399
  8553.  
  8554. [ 317.824561] <0>.(0)[158:bat_thread_kthr][Sync_Real] UI_SOC=71, SOC=70, counter = 5
  8555.  
  8556. [ 317.825541] <0>.(0)[158:bat_thread_kthr]UI_SOC=(71), resetBatteryMeter=(0)
  8557.  
  8558. [ 317.826824] <0>.(0)[158:bat_thread_kthr]mtk_rtc_common: set_rtc_spare_fg_value, 71
  8559.  
  8560. [ 317.827806] <0>.(0)[158:bat_thread_kthr][DLPT_POWER_OFF_EN] run
  8561.  
  8562. [ 318.235881] AEE_MONITOR_SET[status]: 0x1
  8563.  
  8564. [ 319.236855] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 320.118448] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8565.  
  8566. [ 320.238020] AEE_MONITOR_SET[status]: 0x1
  8567.  
  8568. [ 321.239090] <1>.(1)[266:SWWatchDog]AEE_MONITOR_SET[status]: 0x1[ 321.458735] <0>-(0)[0:swapper/0][Power/swap]DP: No enter --- SODI: No enter ---
  8569.  
  8570. [ 321.978490] <1>.(1)[162:wdtk-1][WDK]: kick Ex WDT,RT[321978463689]
  8571.  
  8572. [ 322.240206] AEE_MONITOR_SET[status]: 0x1
  8573.  
  8574. [ 323.128644] <0>.(0)[61:kworker/0:1][MUSB]do_low_power_timer_monitor_work 77: state:IDLE_STAGE, last:0, balanced<0,0>, usb_state:DISCONNECTED
  8575.  
  8576. [ 323.241069] AEE_MONITOR_SET[status]: 0x1
  8577.  
  8578. [ 323.602582] <0>.(0)[55:dlpt_notify_thr][PBM] [ma_to_mw] 3794(mV) * 5500(mA) = 20867(mW)
  8579.  
  8580. [ 324.241999] AEE_MONITOR_SET[status]: 0x1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!