Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Booting Linux on physical CPU 0
- Initializing cgroup subsys cpu
- Linux version 3.4.0 (jaymontana36@Jasen-Desktop) (gcc version 4.9 20150123 (prerelease) (GCC) ) #7 SMP PREEMPT Mon Feb 18 03:56:03 EST 2019
- CPU: ARMv7 Processor [512f06f1] revision 1 (ARMv7), cr=10c5387d
- CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
- Machine: Qualcomm MSM 8974 (Flattened Device Tree), model: Qualcomm MSM 8974Pro-AC CDP, PHX MP
- Initialized persistent memory from 50000000-500fffff
- qcom,ion-heap@28 reserved EBI1 size 614000
- Node qcom,mdss_fb_primary memblock_reserve memory 3200000-5000000
- qcom,msm-contig-mem reserved EBI1 size 280000
- Node qcom,msm-mem-hole removed memory 5a00000-d200000
- Node qcom,msm-mem-hole removed memory fa00000-ff00000
- Node qcom,fih-mem-hole removed memory ff00000-10900000
- memory pool 3 (start 0xdf700000 size 900000) initialized
- cma: CMA: reserved 16 MiB at 36c00000
- cma: Found secure_region, memory base 0, size 252 MiB, limit 0xffffffff
- cma: CMA: reserved 252 MiB at cf800000
- cma: Found adsp_region, memory base 0, size 65 MiB, limit 0xffffffff
- cma: CMA: reserved 68 MiB at cb400000
- cma: Found qsecom_region, memory base 0, size 17 MiB, limit 0xffffffff
- cma: CMA: reserved 20 MiB at ca000000
- Memory policy: ECC disabled, Data cache writealloc
- IMEM DT static mapping successful
- PERCPU: Embedded 9 pages/cpu @cee5b000 s16320 r8192 d12352 u36864
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 742400
- Kernel command line: androidboot.hardware=qcom user_debug=23 msm_rtb.filter=0x3b7 ehci-hcd.park=3 androidboot.selinux=permissive setenforce=0 androidboot.bootdevice=msm_sdcc.1 buildvariant=userdebug androidboot.emmc=true androidboot.serialno=[REMOVED] androidboot.mode=3 androidbsp.device=phx androidboot.device=phx androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_nt35695_innolux_1080p_cmd
- PID hash table entries: 4096 (order: 2, 16384 bytes)
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Memory:
- 90MB
- 40MB
- 1271MB
- 1527MB
- = 2928MB total
- Memory: 2553824k/2553824k available, 453664k reserved, 1870848K highmem
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- vmalloc : 0xf8000000 - 0xff000000 ( 112 MB)
- lowmem : 0xd0900000 - 0xf7f00000 ( 630 MB)
- vmalloc : 0xcfa00000 - 0xd0900000 ( 15 MB)
- lowmem : 0xcd200000 - 0xcfa00000 ( 40 MB)
- vmalloc : 0xc5a00000 - 0xcd200000 ( 120 MB)
- lowmem : 0xc0000000 - 0xc5a00000 ( 90 MB)
- pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- .text : 0xc0008000 - 0xc0eb9e0c (15048 kB)
- .init : 0xc0f00000 - 0xc1060fc0 (1412 kB)
- .data : 0xc1062000 - 0xc11ef420 (1590 kB)
- .bss : 0xc1295e9c - 0xc1601a7c (3503 kB)
- SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- Preemptible hierarchical RCU implementation.
- RCU dyntick-idle grace-period acceleration is enabled.
- NR_IRQS:16 nr_irqs:16 16
- sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
- Switching to timer-based delay loop
- kmemleak: Kernel memory leak detector disabled
- Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- pid_max: default: 32768 minimum: 301
- Security Framework initialized
- SELinux: Initializing.
- Mount-cache hash table entries: 512
- Initializing cgroup subsys debug
- Initializing cgroup subsys cpuacct
- Initializing cgroup subsys freezer
- CPU: Testing write buffer coherency:
- ok
- CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
- Setting up static identity map for 0xaafe58 - 0xaafee0
- MSM Memory Dump table set up
- CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- Brought up 4 CPUs
- SMP: Total of 4 processors activated (153.60 BogoMIPS).
- VFP support v0.3:
- implementor 51 architecture 64 part 6f variant 2 rev 1
- ------------[ cut here ]------------
- WARNING: at ../../../../../../kernel/oneplus/onyx/fs/proc/generic.c:323 __xlate_proc_name+0xa8/0xbc()
- name 'cpu/vfp_bounce'
- Modules linked in:
- [<c010cbf0>] (unwind_backtrace+0x0/0x138) from [<c01b6624>] (warn_slowpath_fmt+0x58/0x7c)
- [<c01b6624>] (warn_slowpath_fmt+0x58/0x7c) from [<c02d6038>] (__xlate_proc_name+0xa8/0xbc)
- [<c02d6038>] (__xlate_proc_name+0xa8/0xbc) from [<c02d60a0>] (__proc_create+0x54/0xf4)
- [<c02d60a0>] (__proc_create+0x54/0xf4) from [<c02d6588>] (proc_create_data+0x60/0x9c)
- [<c02d6588>] (proc_create_data+0x60/0x9c) from [<c0f034b8>] (vfp_init+0x1c0/0x244)
- [<c0f034b8>] (vfp_init+0x1c0/0x244) from [<c0100754>] (do_one_initcall+0xa0/0x19c)
- [<c0100754>] (do_one_initcall+0xa0/0x19c) from [<c0f00cac>] (kernel_init+0x144/0x220)
- [<c0f00cac>] (kernel_init+0x144/0x220) from [<c0106ec4>] (kernel_thread_exit+0x0/0x8)
- ---[ end trace da227214a82491b7 ]---
- Failed to create procfs node for VFP bounce reporting
- dummy:
- NET: Registered protocol family 16
- DMA: preallocated 256 KiB pool for atomic coherent allocations
- KPI: Bootloader start count = 3377651139
- KPI: Bootloader end count = 3619498224
- KPI: Bootloader display count = 4079237019
- KPI: Bootloader load kernel count = 1092847563
- KPI: Kernel MPM timestamp = 167864
- KPI: Kernel MPM Clock frequency = 32768
- socinfo_print: v9, id=194, ver=1.1, raw_id=1972, raw_ver=1 ,hw_plat=1, hw_plat_ver=65536
- accessory_chip=0,hw_plat_subtype=0, pmic_model=65537, pmic_die_revision=196609,foundry_id=1
- msm_8974_phx_init_gpiomux, default gpio setting
- gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio
- msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
- 8841_s1: 675 <--> 1050 mV at 0 mV normal idle
- 8841_s1_ao: 675 <--> 1050 mV at 0 mV normal idle
- 8841_s1_so: 675 <--> 1050 mV at 675 mV normal idle
- 8841_s2: 500 <--> 1050 mV at 0 mV normal idle
- 8841_s2_corner: 0 <--> 0 mV at 0 mV normal idle
- 8841_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- 8841_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- 8841_s3: 1150 mV normal idle
- 8841_s4: 815 <--> 900 mV at 0 mV normal idle
- 8841_s4_corner: 0 <--> 0 mV at 0 mV normal idle
- 8841_s4_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- 8941_s1: 1300 mV normal idle
- 8941_s2: 2150 mV normal idle
- 8941_s3: 1800 mV normal idle
- 8941_l1: 1225 mV normal idle
- 8941_l2: 1200 mV normal idle
- 8941_l3: 1050 mV normal idle
- 8941_l4: 1300 mV normal idle
- 8941_l5: 1800 mV normal idle
- 8941_l6: 1800 mV normal idle
- 8941_l7: 1800 mV normal idle
- 8941_l8: 1800 mV normal idle
- 8941_l9: 1800 <--> 2950 mV at 2950 mV normal idle
- 8941_l10: 1800 <--> 2950 mV at 2950 mV normal idle
- 8941_l11: 1225 <--> 1350 mV at 1300 mV normal idle
- 8941_l12: 1800 mV normal idle
- 8941_l12_ao: 1800 mV normal idle
- 8941_l13: 1800 <--> 2950 mV at 2950 mV normal idle
- 8941_l14: 1800 mV normal idle
- 8941_l15: 2050 mV normal idle
- 8941_l16: 3000 mV normal idle
- 8941_l17: 2800 mV normal idle
- 8941_l18: 2850 mV normal idle
- 8941_l19: 2900 <--> 3350 mV at 3300 mV normal idle
- 8941_l20: 2950 mV normal idle
- 8941_l21: 2950 mV normal idle
- 8941_l22: 2800 mV normal idle
- 8941_l23: 2800 mV normal idle
- 8941_l24: 3075 mV normal idle
- 8941_lvs1:
- 8941_lvs2:
- 8941_lvs3:
- PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 1/4
- PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 1/4
- krait0: 500 <--> 1120 mV at 900 mV fast normal idle
- krait1: 500 <--> 1120 mV at 900 mV fast normal idle
- krait2: 500 <--> 1120 mV at 900 mV fast normal idle
- krait3: 500 <--> 1120 mV at 900 mV fast normal idle
- msm-thermal qcom,msm-thermal.71: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
- msm-thermal qcom,msm-thermal.71: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qti,pmic-opt-curr-temp. KTM continues
- msm-thermal qcom,msm-thermal.71: probe_thermal_efuse_read:Failed reading node=/soc/qcom,msm-thermal, key=qcom,efuse-data. KTM continues
- msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
- persistent_ram: found existing buffer, size 53523, start 53523
- console [ram0] enabled
- hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- hw-breakpoint: maximum watchpoint size is 8 bytes.
- msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
- 8941_boost: 5000 mV
- 8941_mvs1:
- qcom,qpnp-regulator qpnp-regulator-f694d600: Failed to find supply parent
- BBox;qpnp_regulator_probe: Probe fail
- BBox::UEC;17::0
- spmi qpnp-regulator-f694d600: Driver qcom,qpnp-regulator requests probe deferral
- 8941_mvs2:
- 8941_mvs2: supplied by 8941_boost
- kworker/u:1 used greatest stack depth: 6268 bytes left
- sps:BAM 0xf9984000 (va:0xc5ae0000) enabled: ver:0x6, number of pipes:20
- sps:BAM 0xf9984000 is registered.
- sps:sps is ready.
- gdsc_venus:
- gdsc_mdss:
- gdsc_jpeg:
- gdsc_vfe:
- gdsc_oxili_gx:
- gdsc_oxili_gx: supplied by 8841_s4_corner
- gdsc_oxili_cx:
- gdsc_usb_hsic:
- AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
- msm_bus_fabric fc478000.msm-mmss-noc: msmbus_coresight initialized
- msm_bus_fabric fc460000.msm-sys-noc: msmbus_coresight initialized
- msm_bus_fabric fc468000.msm-periph-noc: msmbus_coresight initialized
- AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 5120
- msm_bus_fabric fc380000.msm-bimc: msmbus_coresight initialized
- AXI: msm_bus_fabric_probe(): Coresight support absent for bus: 6144
- msm_bus_fabric fc470000.msm-ocmem-noc: msmbus_coresight initialized
- msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr c5e00000
- Physical OCMEM zone layout:
- zone graphics : 0xfec00000 - 0xfecfffff (1024 KB)
- zone lp_audio : 0xfed00000 - 0xfed7ffff ( 512 KB)
- zone video : 0xfed00000 - 0xfed7ffff ( 512 KB)
- bio: create slab <bio-0> at 0
- platform spi_eth_phy_vreg.82: Driver reg-fixed-voltage requests probe deferral
- cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
- ION-heap mm: Cannot specify alignment for this type of heap
- cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
- ION-heap adsp: Cannot specify alignment for this type of heap
- cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
- ION heap system created
- ION heap kmalloc created
- ION heap mm created at 0xcf800000 with size fc00000
- ION heap adsp created at 0xcb400000 with size 4100000
- ION heap qsecom created at 0xca000000 with size 1100000
- ION heap audio created at 0xdf700000 with size 614000
- ION heap pil_1 created at 0x05a00000 with size 2100000
- ION heap pil_2 created at 0x08000000 with size 5000000
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- Linux media interface: v0.10
- Linux video capture interface: v2.00
- qpnp_lpg_calc_period: LPG channel '0' pwm size is forced to=9
- msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at c5d00000, with 3 ctx banks
- msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at c5d20000, with 3 ctx banks
- msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at c5d40000, with 5 ctx banks
- msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at c5d60000, with 3 ctx banks
- msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at c5d80000, with 3 ctx banks
- msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
- msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
- msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
- msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
- msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
- msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
- msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
- msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
- msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
- msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
- msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
- msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
- msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
- msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
- msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
- msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
- msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
- Advanced Linux Sound Architecture Driver Version 1.0.25.
- Bluetooth: Core ver 2.16
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: SCO socket layer initialized
- cfg80211: Calling CRDA to update world regulatory domain
- cfg80211: World regulatory domain updated:
- cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
- Switching to clocksource arch_sys_counter
- msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP: reno registered
- UDP hash table entries: 512 (order: 2, 16384 bytes)
- UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- NET: Registered protocol family 1
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 1424K
- Detected 9 counters on the L2CC PMU.
- gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
- gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
- gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
- gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
- gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
- gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
- gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
- gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
- gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
- gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
- gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
- gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
- gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
- gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
- gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
- gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
- gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
- gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
- pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
- pil_pronto fb21b000.qcom,pronto: using secure boot
- pil_venus fdce0000.qcom,venus: using secure boot
- NET: Registered protocol family 27
- clock-krait-8974 f9016000.qcom,clock-krait: PVS config version: 1
- clock-krait-8974 f9016000.qcom,clock-krait: Speed bin: 3
- clock-krait-8974 f9016000.qcom,clock-krait: PVS bin: 6
- BBox::UPD;26::speed3-pvs6-bin-v1
- clock-krait-8974 f9016000.qcom,clock-krait: PVS version: 1
- L2 @ 729600 KHz
- CPU0 @ 960000 KHz
- CPU1 @ unknown rate. Forcing new rate.
- CPU1 @ 300000 KHz
- CPU2 @ unknown rate. Forcing new rate.
- CPU2 @ 300000 KHz
- CPU3 @ unknown rate. Forcing new rate.
- CPU3 @ 300000 KHz
- msm_rpm_log_probe: OK
- msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
- mpm_counter: [ 0.654271]:(188012)
- audit: initializing netlink socket (disabled)
- type=2000 audit(0.650:1): initialized
- highmem bounce pool size: 64 pages
- fuse init (API version 7.18)
- msgmni has been set to 1368
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler row registered (default)
- io scheduler cfq registered
- io scheduler test-iosched registered
- gpiochip_add: registered GPIOs 444 to 447 on device: pm8841-mpp
- gpiochip_add: registered GPIOs 408 to 443 on device: pm8941-gpio
- gpiochip_add: registered GPIOs 402 to 407 on device: pm8941-mpp
- qpnp_pin_check_constraints: invalid source select value 2 for mpp 1
- qcom,qpnp-pin qpnp-pin-f694ca00: _qpnp_pin_config: unable to set default config for pmic pin 1
- qcom,qpnp-pin: probe of qpnp-pin-f694ca00 failed with error -22
- rt4501_init:566
- classdev led register success
- mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc5dc0000
- mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc5d9e000
- mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-clk-levels : spec error in device tree
- mdss_mdp_parse_bootarg: mdss_mdp_parse_bootarg:1541: pan_name=[1:dsi:0:qcom,mdss_dsi_nt35695_innolux_1080p_cmd] end=[pp]
- mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- mdss_dsi_panel_init: Panel Name = innolux nt35695 1080p command mode dsi panel
- mdss_dsi_parse_roi_alignment: Panel roi alignment not found
- mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
- mdss_dsi_parse_panel_features:1151 Partial update disabled
- mdss_dsi_parse_panel_features: ulps feature disabled
- mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- mdss_dsi_panel_init: Continuous splash enabled
- ------------[ cut here ]------------
- WARNING: at ../../../../../../kernel/oneplus/onyx/fs/proc/generic.c:323 __xlate_proc_name+0xa8/0xbc()
- name 'AllHWList/LCM0'
- Modules linked in:
- [<c010cbf0>] (unwind_backtrace+0x0/0x138) from [<c01b6624>] (warn_slowpath_fmt+0x58/0x7c)
- [<c01b6624>] (warn_slowpath_fmt+0x58/0x7c) from [<c02d6038>] (__xlate_proc_name+0xa8/0xbc)
- [<c02d6038>] (__xlate_proc_name+0xa8/0xbc) from [<c02d60a0>] (__proc_create+0x54/0xf4)
- [<c02d60a0>] (__proc_create+0x54/0xf4) from [<c02d6404>] (proc_mkdir_mode+0x20/0x54)
- [<c02d6404>] (proc_mkdir_mode+0x20/0x54) from [<c0485838>] (mdss_dsi_panel_init+0x20c4/0x2240)
- [<c0485838>] (mdss_dsi_panel_init+0x20c4/0x2240) from [<c0a65a58>] (mdss_dsi_ctrl_probe+0x874/0xa90)
- [<c0a65a58>] (mdss_dsi_ctrl_probe+0x874/0xa90) from [<c0520644>] (driver_probe_device+0x17c/0x418)
- [<c0520644>] (driver_probe_device+0x17c/0x418) from [<c052098c>] (__driver_attach+0x68/0x8c)
- [<c052098c>] (__driver_attach+0x68/0x8c) from [<c051f22c>] (bus_for_each_dev+0x84/0x94)
- [<c051f22c>] (bus_for_each_dev+0x84/0x94) from [<c051fb40>] (bus_add_driver+0x140/0x2ac)
- [<c051fb40>] (bus_add_driver+0x140/0x2ac) from [<c0520f94>] (driver_register+0xa4/0x11c)
- [<c0520f94>] (driver_register+0xa4/0x11c) from [<c0f241d8>] (mdss_dsi_driver_init+0x10/0x34)
- [<c0f241d8>] (mdss_dsi_driver_init+0x10/0x34) from [<c0100754>] (do_one_initcall+0xa0/0x19c)
- [<c0100754>] (do_one_initcall+0xa0/0x19c) from [<c0f00cac>] (kernel_init+0x144/0x220)
- [<c0f00cac>] (kernel_init+0x144/0x220) from [<c0106ec4>] (kernel_thread_exit+0x0/0x8)
- ---[ end trace da227214a82491b8 ]---
- lcm_proc_init: Fail to create AllHWList/LCM0/color_temperature
- lcm_proc_init: Fail to create AllHWList/LCM0/color_mode
- lcm_proc_init: Fail to create AllHWList/LCM0/CABC_settings
- lcm_proc_init: Fail to create AllHWList/LCM0/mipi_reg
- mdss_dsi_retrieve_ctrl_resources: ctrl_base=c5da0800 ctrl_size=1f8 phy_base=c5da2b00 phy_size=2b0
- dsi_panel_device_register: Using default BTA for ESD check
- mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
- mdss_hw_init: MDP Rev=10020001
- mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
- controller config is not present
- mdss_dsi_pref_prim_panel:can't find panel phandle
- mdss_dsi_ctrl_probe: can't find panel node 0:qcom,mdss_dsi_nt35695_innolux_1080p_cmd
- mdss_dsi_ctrl: probe of fd922e00.qcom,mdss_dsi failed with error 41
- mdss_dsi_status_init: DSI status check interval:5000
- hdmi_tx_init_resource: 'core_physical': start = 0xc5da6100, len=0x370
- hdmi_tx_init_resource: 'phy_physical': start = 0xc5da8500, len=0x7c
- hdmi_tx_init_resource: 'qfprom_physical': start = 0xc5db0000, len=0x60f0
- mdss_register_panel: adding framebuffer device fd922100.qcom,hdmi_tx
- mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.5
- mdss_fb_parse_dt: split framebuffer left=0 right=0
- mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
- mdss_mdp_pp_resume: Failed to get AD info, err = -112
- mdss_fb_parse_dt: split framebuffer left=0 right=0
- mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
- mdss_fb_parse_dt: split framebuffer left=0 right=0
- mdss_fb_register: FrameBuffer[2] 1920x1080 registered successfully!
- sps: BAM device 0xf9944000 is not registered yet.
- sps:BAM 0xf9944000 is registered.
- f995d000.uart: ttyHS0 at MMIO 0xf995d000 (irq = 145) is a MSM HS UART
- msm_serial_hsl_probe: detected port #0 (ttyHSL0)
- f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
- msm_hsl_console_setup: console setup on port #0
- console [ttyHSL0] enabled
- msm_serial_hsl_init: driver initialized
- diagchar initialized now
- kgsl: adreno_of_read_property: Unable to read 'qcom,pm-qos-latency'
- kgsl bus ib [0] = 2456000000
- kgsl bus ib [1] = 3680000000
- kgsl bus ib [2] = 4912000000
- kgsl bus ib [3] = 7464000000
- kgsl bus index is 3 for pwrlevel 0
- kgsl bus index is 2 for pwrlevel 1
- kgsl bus index is 2 for pwrlevel 2
- kgsl bus index is 1 for pwrlevel 3
- kgsl bus index is 0 for pwrlevel 4
- kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
- kgsl: num bus is 4
- brd: module loaded
- loop: module loaded
- i2c-core: driver [isa1200] using legacy suspend method
- i2c-core: driver [isa1200] using legacy resume method
- QSEECOM: qseecom_probe: support_bus_scaling=0x1
- QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
- QSEECOM: qseecom_probe: file-encrypt-pipe-pair=0x0
- QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1
- QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
- QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x0
- QSEECOM: qseecom_probe: secure app region addr=0x7b00000 size=0x500000
- [drv2603_vib_init]
- [drv2603_vib_probe]
- [drv2603_vib_probe] vib_break:0, pwm_period:32, pwm_level:50
- i2c-core: driver [tabla-i2c-core] using legacy suspend method
- i2c-core: driver [tabla-i2c-core] using legacy resume method
- i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
- i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
- Loading pn544 driver
- Loading pn547 driver
- pn544_probe pn547 probe.
- pn544_probe irq_gpio=46, ven_gpio=75, firm_gpio=120
- pn544_probe : requesting IRQ 342
- SCSI Media Changer driver v0.25
- tun: Universal TUN/TAP device driver, 1.6
- tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- rmnet_init: BAM devices[9]
- PPP generic driver version 2.4.2
- PPP BSD Compression module registered
- PPP Deflate Compression module registered
- PPP MPPE Compression module registered
- NET: Registered protocol family 24
- SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- CSLIP: code copyright 1989 Regents of the University of California.
- wcnss_wlan probed in built-in mode
- wcnss: pre-allocation failed
- usbcore: registered new interface driver asix
- usbcore: registered new interface driver cdc_ether
- usbcore: registered new interface driver net1080
- usbcore: registered new interface driver cdc_subset
- usbcore: registered new interface driver zaurus
- usbcore: registered new interface driver cdc_ncm
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- usbcore: registered new interface driver cdc_acm
- cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- usbcore: registered new interface driver ccid_bridge
- ccid_bridge_init: success
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- usbcore: registered new interface driver ums-alauda
- usbcore: registered new interface driver ums-cypress
- usbcore: registered new interface driver ums-datafab
- usbcore: registered new interface driver ums_eneub6250
- usbcore: registered new interface driver ums-freecom
- usbcore: registered new interface driver ums-isd200
- usbcore: registered new interface driver ums-jumpshot
- usbcore: registered new interface driver ums-karma
- usbcore: registered new interface driver ums-onetouch
- usbcore: registered new interface driver ums-sddr09
- usbcore: registered new interface driver ums-sddr55
- usbcore: registered new interface driver ums-usbat
- usbcore: registered new interface driver usb_ehset_test
- mbim_init: initialize 1 instances
- mbim_init: Initialized 1 ports
- rndis_qc_init: initialize rndis QC instance
- gadget: Mass Storage Function, version: 2009/09/11
- gadget: Number of LUNs=2
- lun0: LUN: read only CD-ROM file: (no medium)
- lun1: LUN: removable file: (no medium)
- gadget: android_usb ready
- mousedev: PS/2 mouse device common for all mice
- usbcore: registered new interface driver xpad
- [SYNAPTICS]: ============enter synaptics_rmi4_probe=============
- [SYNAP]max_x = 1080, max_y = 1920
- input: synaptics_dsx as /devices/virtual/input/input0
- vn2
- virtual key =0
- BBox; Synaptics-V1834244_0214
- ------------[ cut here ]------------
- WARNING: at ../../../../../../kernel/oneplus/onyx/fs/proc/generic.c:323 __xlate_proc_name+0xa8/0xbc()
- name 'AllHWList/Touch'
- Modules linked in:
- [<c010cbf0>] (unwind_backtrace+0x0/0x138) from [<c01b6624>] (warn_slowpath_fmt+0x58/0x7c)
- [<c01b6624>] (warn_slowpath_fmt+0x58/0x7c) from [<c02d6038>] (__xlate_proc_name+0xa8/0xbc)
- [<c02d6038>] (__xlate_proc_name+0xa8/0xbc) from [<c02d60a0>] (__proc_create+0x54/0xf4)
- [<c02d60a0>] (__proc_create+0x54/0xf4) from [<c02d64f4>] (create_proc_entry+0x5c/0x90)
- [<c02d64f4>] (create_proc_entry+0x5c/0x90) from [<c0a750b8>] (synaptics_rmi4_probe+0x794/0xaec)
- [<c0a750b8>] (synaptics_rmi4_probe+0x794/0xaec) from [<c0520644>] (driver_probe_device+0x17c/0x418)
- [<c0520644>] (driver_probe_device+0x17c/0x418) from [<c052098c>] (__driver_attach+0x68/0x8c)
- [<c052098c>] (__driver_attach+0x68/0x8c) from [<c051f22c>] (bus_for_each_dev+0x84/0x94)
- [<c051f22c>] (bus_for_each_dev+0x84/0x94) from [<c051fb40>] (bus_add_driver+0x140/0x2ac)
- [<c051fb40>] (bus_add_driver+0x140/0x2ac) from [<c0520f94>] (driver_register+0xa4/0x11c)
- [<c0520f94>] (driver_register+0xa4/0x11c) from [<c0100754>] (do_one_initcall+0xa0/0x19c)
- [<c0100754>] (do_one_initcall+0xa0/0x19c) from [<c0f00cac>] (kernel_init+0x144/0x220)
- [<c0f00cac>] (kernel_init+0x144/0x220) from [<c0106ec4>] (kernel_thread_exit+0x0/0x8)
- ---[ end trace da227214a82491b9 ]---
- [SYNAP]input_dev->max_x = 1080
- [SYNAP]input_dev->max_y = 1920
- [SYNAPTICS]: ============exit synaptics_rmi4_probe=============
- using rtc device, qpnp_rtc, for alarms
- qcom,qpnp-rtc qpnp-rtc-f694cc00: rtc core: registered qpnp_rtc as rtc0
- i2c /dev entries driver
- msm_led_torch_create_classdev:46 Invalid fctrl or torch trigger
- g_sctrl[0] f5f72a00
- g_sctrl[1] f5f72c00
- g_sctrl[2] f5f72e00
- fih_camera_focus_uevent_probe done
- camera sensor name=isp_imx135
- camera firmware name=PHXEVT2_5
- set power setting:PHXEVT2_5, preview_resolution =6 , snapshot_resolution = 8 , hd_resolution = 4
- set power setting:PHXEVT2_5, firmwaresize=1048576
- isp_get_firmware_version:Get ISP Firmware Version
- *********************** ISP FIRMWARE VERSION : 0x130226 ***********************
- camera sensor name=isp_imx219
- set power setting:F_PHXEVT2_5, preview_resolution =5 , snapshot_resolution = 1 , hd_resolution = 4
- __msm_jpeg_init:951] Jpeg Device id 0
- __msm_jpeg_init:951] Jpeg Device id 1
- __msm_jpeg_init:951] Jpeg Device id 2
- lirc_dev: IR Remote Control driver registered, major 231
- IR NEC protocol handler initialized
- IR RC5(x) protocol handler initialized
- IR RC6 protocol handler initialized
- IR JVC protocol handler initialized
- IR Sony protocol handler initialized
- IR RC5 (streamzap) protocol handler initialized
- IR SANYO protocol handler initialized
- IR MCE Keyboard/mouse protocol handler initialized
- IR LIRC bridge handler initialized
- usbcore: registered new interface driver uvcvideo
- USB Video Class driver (1.1.1)
- BMS: qpnp_bms_init: QPNP BMS INIT
- spmi qpnp-bms-f694be00: Driver qcom,qpnp-bms requests probe deferral
- spmi qpnp-charger-f694c600: Driver qcom,qpnp-charger requests probe deferral
- [fih_battery_probe]
- device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- device-mapper: req-crypt: dm-req-crypt successfully initalized.
- cpuidle: using governor ladder
- cpuidle: using governor menu
- sdhci: Secure Digital Host Controller Interface driver
- sdhci: Copyright(c) Pierre Ossman
- sdhci-pltfm: SDHCI platform and OF driver helper
- mmc0: no vmmc regulator found
- mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
- mmc1: no vmmc regulator found
- mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
- QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x1
- QCE50: __qce_get_device_tree_data: ce-device =0x0
- QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
- QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc6180000
- QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
- QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
- qce qcedev.0: Qualcomm Crypto 5.1.0 device found @0xfd440000
- qce qcedev.0: CE device = 0x0
- , IO base, CE = 0xc6180000
- , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
- IO base BAM = 0x0
- BAM IRQ 268
- Engines Availability = 0x1010853
- sps:BAM 0xfd444000 is registered.
- sps:BAM 0xfd444000 (va:0xc6160000) enabled: ver:0x20, number of pipes:8
- QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268
- qcedev: FIPS140-2 Known Answer Tests : Skipped
- QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x2
- QCE50: __qce_get_device_tree_data: ce-device =0x0
- QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
- QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc61c0000
- QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
- QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
- qcrypto fd440000.qcom,qcrypto: Qualcomm Crypto 5.1.0 device found @0xfd440000
- qcrypto fd440000.qcom,qcrypto: CE device = 0x0
- , IO base, CE = 0xc61c0000
- , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
- IO base BAM = 0x0
- BAM IRQ 268
- Engines Availability = 0x1010853
- mmc0: csd d02701320f5903ffffffffef8a404000
- QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268
- mmc0: cid 90014a4841473265050359b88d22b200
- qcrypto fd440000.qcom,qcrypto: qcrypto-ecb-aes
- qcrypto fd440000.qcom,qcrypto: qcrypto-cbc-aes
- qcrypto fd440000.qcom,qcrypto: qcrypto-ctr-aes
- qcrypto fd440000.qcom,qcrypto: qcrypto-ecb-des
- qcrypto fd440000.qcom,qcrypto: qcrypto-cbc-des
- qcrypto fd440000.qcom,qcrypto: qcrypto-ecb-3des
- mmc0: ext_csd
- mmc0: 000000000000000101013F3F01000078
- qcrypto fd440000.qcom,qcrypto: qcrypto-cbc-3des
- mmc0: 01030100170000660000000000000000
- mmc0: 00000000000000000000000000000000
- mmc0: 00000000000000000000000000000000
- mmc0: 00000000000000000000000000000000
- mmc0: 00000000000000000000000000000000
- mmc0: 00000000000000000000000000000000
- mmc0: 00000000000000000000000000000000
- mmc0: 00000000000000000000000000000000
- mmc0: 00000000000000000000000000000000
- mmc0: 00000000000000000000000000000000
- mmc0: 00000000000000000000000000000000
- mmc0: 00000000000000000000000000000000
- mmc0: 00000000000000000000000000000000
- mmc0: 00000000000000000000000000080000
- mmc0: 00000401014040074105000000000000
- mmc0: 00030000000400056400000000000A00
- mmc0: 0000000000000002550A0A0700200601
- mmc0: 021010070717110C01D5C00000000000
- mmc0: 0000000000000000010A1F5700020007
- mmc0: 00000000000000000000000038000000
- mmc0: 00000000000000201F05000000000007
- mmc0: 0003AB00000000000000000000000000
- mmc0: 00000000000000000000000000000000
- mmc0: 00000000000000000000000000000000
- mmc0: 00000000000000000000000000000000
- mmc0: 00000000000000000000000000000000
- mmc0: 0000000000000000000000000037FFFF
- mmc0: 0100000A000000000000000000000000
- mmc0: 00000000000000000000000000000000
- mmc0: 0000000000000000000001D5C000013B
- mmc0: 00000000000000000000000000000000
- mmc0: BKOPS_EN bit = 0
- qcrypto fd440000.qcom,qcrypto: qcrypto-xts-aes
- qcrypto fd440000.qcom,qcrypto: qcrypto-sha1
- qcrypto fd440000.qcom,qcrypto: qcrypto-sha256
- qcrypto fd440000.qcom,qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
- qcrypto fd440000.qcom,qcrypto: qcrypto-aead-hmac-sha1-cbc-des
- qcrypto fd440000.qcom,qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
- qcrypto fd440000.qcom,qcrypto: qcrypto-hmac-sha1
- qcrypto fd440000.qcom,qcrypto: qcrypto-hmac-sha256
- qcrypto fd440000.qcom,qcrypto: qcrypto-aes-ccm
- qcrypto fd440000.qcom,qcrypto: qcrypto-rfc4309-aes-ccm
- qcrypto: FIPS140-2 Known Answer Tests: Skipped
- QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x0
- QCE50: __qce_get_device_tree_data: ce-device =0x1
- QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
- QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc6500000
- QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
- QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
- qcrypto fd440000.qcom,qcrypto1: Qualcomm Crypto 5.1.0 device found @0xfd440000
- mmc0: new HS400 MMC card at address 0001
- qcrypto fd440000.qcom,qcrypto1: CE device = 0x1
- , IO base, CE = 0xc6500000
- , Consumer (IN) PIPE 0, Producer (OUT) PIPE 1
- IO base BAM = 0x0
- BAM IRQ 268
- Engines Availability = 0x1010853
- mmcblk0: mmc0:0001 HAG2e 14.6 GiB
- mmcblk0rpmb: mmc0:0001 HAG2e partition 3 4.00 MiB
- QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268
- qcrypto: FIPS140-2 Known Answer Tests: Skipped
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- ashmem: initialized
- logger: created 256K log 'log_main'
- mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36
- logger: created 256K log 'log_events'
- logger: created 256K log 'log_radio'
- logger: created 256K log 'log_system'
- logger: created 256K log 'fih'
- sps:BAM 0xf9304000 is registered.
- sps:BAM 0xf9a44000 is registered.
- usb_bam_ipa_create_resources: Failed to create USB_PROD resource
- qcom,qpnp-power-on qpnp-power-on-f694ba00: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'warm' boot
- qcom,qpnp-power-on qpnp-power-on-f694ba00: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
- input: qpnp_pon as /devices/virtual/input/input1
- qpnp_coincell_charger_show_state: enabled=Y, voltage=3000 mV, resistance=2100 ohm
- pft [pft_init]: Drivr initialized successfully Feb 16 2019 21:50:39.n
- PMIC@SID4: PM8841 v2.1 options: 0, 0, 2, 2
- PMIC@SID0: PM8941 v3.1 options: 0, 0, 0, 0
- coresight-fuse fc4be024.fuse: Fuse initialized
- coresight-cti fc308000.cti: CTI initialized
- coresight-cti fc309000.cti: CTI initialized
- coresight-cti fc30a000.cti: CTI initialized
- coresight-cti fc30b000.cti: CTI initialized
- coresight-cti fc30c000.cti: CTI initialized
- coresight-cti fc30d000.cti: CTI initialized
- coresight-cti fc30e000.cti: CTI initialized
- coresight-cti fc30f000.cti: CTI initialized
- coresight-cti fc310000.cti: CTI initialized
- coresight-cti fc340000.cti: CTI initialized
- coresight-cti fc341000.cti: CTI initialized
- coresight-cti fc342000.cti: CTI initialized
- coresight-cti fc343000.cti: CTI initialized
- coresight-cti fc344000.cti: CTI initialized
- coresight-cti fc348000.cti: CTI initialized
- coresight-cti fc34d000.cti: CTI initialized
- coresight-cti fc350000.cti: CTI initialized
- coresight-cti fc354000.cti: CTI initialized
- coresight-cti fc358000.cti: CTI initialized
- coresight-csr fc302000.csr: CSR initialized
- coresight-tmc fc322000.tmc: Byte Counter feature enabled
- sps:BAM 0xfc37c000 is registered.
- coresight-tmc fc322000.tmc: TMC initialized
- coresight-tmc fc307000.tmc: TMC initialized
- coresight-tpiu fc318000.tpiu: TPIU initialized
- coresight-funnel fc31b000.funnel: FUNNEL initialized
- coresight-funnel fc319000.funnel: FUNNEL initialized
- coresight-funnel fc31a000.funnel: FUNNEL initialized
- coresight-funnel fc345000.funnel: FUNNEL initialized
- coresight-funnel fc364000.funnel: FUNNEL initialized
- coresight-replicator fc31c000.replicator: REPLICATOR initialized
- coresight-stm fc321000.stm: STM initialized
- coresight-hwevent fdf30018.hwevent: Hardware Event driver initialized
- coresight-etm fc33c000.etm: ETM initialized
- coresight-etm fc33c000.etm: PC save enabled
- coresight-etm fc33d000.etm: ETM initialized
- coresight-etm fc33d000.etm: PC save enabled
- coresight-etm fc33e000.etm: ETM initialized
- coresight-etm fc33e000.etm: PC save enabled
- coresight-etm fc33f000.etm: ETM initialized
- coresight-etm fc33f000.etm: PC save enabled
- coresight-audio-etm audio_etm0.0: Audio ETM initialized
- coresight-modem-etm modem_etm0.1: Modem ETM initialized
- coresight-wcn-etm wcn_etm0.2: Wireless ETM initialized
- coresight-rpm-etm rpm_etm0.3: RPM ETM initialized
- [fih_read_power_info] No battery power-supply or no get function
- [fih_update_status] battery power-supply not ready
- usbcore: registered new interface driver snd-usb-audio
- msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
- msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
- platform qcom,msm-voip-dsp.50: Driver msm-voip-dsp requests probe deferral
- platform qcom,msm-pcm-voice.51: Driver msm-pcm-voice requests probe deferral
- ocmem: Notifier registered for 5
- msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
- platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
- oprofile: using arm/armv7-krait
- u32 classifier
- Actions configured
- Netfilter messages via NETLINK v0.30.
- nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- ctnetlink v0.93: registering with nfnetlink.
- NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- xt_time: kernel timezone is -0000
- TCP: bic registered
- ip_tables: (C) 2000-2006 Netfilter Core Team
- arp_tables: (C) 2002 David S. Miller
- TCP: cubic registered
- Initializing XFRM netlink socket
- NET: Registered protocol family 10
- Mobile IPv6
- ip6_tables: (C) 2000-2006 Netfilter Core Team
- IPv6 over IPv4 tunneling driver
- NET: Registered protocol family 17
- NET: Registered protocol family 15
- Bridge firewalling registered
- Ebtables v2.0 registered
- Bluetooth: RFCOMM TTY layer initialized
- Bluetooth: RFCOMM socket layer initialized
- Bluetooth: RFCOMM ver 1.11
- Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- Bluetooth: BNEP filters: protocol multicast
- Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- L2TP core driver, V2.0
- Registering SWP/SWPB emulation handler
- gdsc_oxili_gx: disabling
- gdsc_venus: disabling
- msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): No hdmi audio support
- platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
- input: gpio-keys as /devices/gpio_keys.84/input/input2
- [GPIO_KEY_WAKE] gpio:412, state:0
- [GPIO_KEY_WAKE] gpio:409, state:0
- qcom,qpnp-rtc qpnp-rtc-f694cc00: setting system clock to 1970-05-08 12:23:37 UTC (11017417)
- flash_wa:
- batt_protect_probe
- batfet:
- 8941_smbb_otg:
- 8941_smbb_otg: supplied by 8941_boost
- 8941_smbb_boost: 5000 mV
- [parse_dts_to_pdata] bat_psy:battery
- [parse_dts_to_pdata] chg_psy:fih_battery
- [parse_dts_to_pdata] Use negative offset = 0
- get_prop_batt_status: Re-detect usb-input
- msm_thermal:interrupt_mode_init Interrupt mode init
- msm_thermal:disable_msm_thermal Max frequency reset for CPU0
- msm_thermal:disable_msm_thermal Max frequency reset for CPU1
- msm_thermal:disable_msm_thermal Max frequency reset for CPU2
- msm_thermal:disable_msm_thermal Max frequency reset for CPU3
- clock_late_init: Removing enables held for handed-off clocks
- ALSA device list:
- No soundcards found.
- qpnp_chg_usb_usbin_valid_irq_handler: usbin-valid triggered: 1 host_mode: 0
- msm-dwc3 msm_dwc3: dwc3_msm_power_set_property_usb: notify xceiv event
- msm-dwc3 msm_dwc3: dwc3_msm_power_set_property_usb: notify xceiv event
- qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 1, dc = 0 b_health = 1 batt_present = 1
- [fih_update_status] PRE:1, STS:1/1, HEL:1/1, CAP:50/0/98/0, FCC:0/0, VOL:4179, CUR:0, TMP:376/0, CEN:1, CUM:2000, ICM:100, ICS:0, IVR:1, STL:0, UPR:1, UON:1, USC:0, UTP:4, UVL:5044, SMT:0
- Freeing init memory: 384K
- init: init first stage started!
- SELinux: avtab: invalid type or class
- init: SELinux: Could not load policy: Invalid argument
- init: failed to load policy: Invalid argument
- init: Security failure; rebooting into recovery mode...
- SysRq :
- Emergency Remount R/O
- Emergency Remount complete
- dwc3 f9200000.dwc3: XCVR: ID set
- dwc3 f9200000.dwc3: XCVR: BSV set
- msm-dwc3 msm_dwc3: chg detection work
- mdss_fb_release_all: try to close unopened fb 2! from init
- mdss_fb_release_all: try to close unopened fb 1! from init
- mdss_fb_release_all: try to close unopened fb 0! from init
- msm-dwc3 msm_dwc3: chg detection work
- [fih_battery_shutdown]
- msm-dwc3 msm_dwc3: chg detection work
- msm-dwc3 msm_dwc3: chg detection work
- msm-dwc3 msm_dwc3: chg_type = USB_SDP_CHARGER
- [fih_update_status] PRE:1, STS:1/1, HEL:1/1, CAP:50/0/98/0, FCC:0/0, VOL:4200, CUR:0, TMP:376/0, CEN:1, CUM:2000, ICM:100, ICS:0, IVR:1, STL:0, UPR:1, UON:1, USC:0, UTP:4, UVL:5044, SMT:0
- Restarting system with command 'recovery'.
- Going down for restart now
- msm_restart_prepare: cmd = (recovery)
- msm_restart_prepare: rere = 0x77665502
- msm_restart_prepare: dload = (false)
- Calling SCM to disable SPMI PMIC arbiter
- No errors detected
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement