SHARE
TWEET

WPA_LOG

luizm929 Jul 12th, 2015 253 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. wpa_supplicant v2.4
  2. random: Trying to read entropy from /dev/random
  3. Successfully initialized wpa_supplicant
  4. Initializing interface 'wlp3s0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
  5. Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
  6. Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
  7. ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=wheel'
  8. update_config=1
  9. Line: 4 - start of a new network block
  10. BSSID - hexdump(len=6): c0 c1 c0 89 39 86
  11. ssid - hexdump_ascii(len=3):
  12.      65 64 6f                                          edo            
  13. PSK (ASCII passphrase) - hexdump_ascii(len=22): [REMOVED]
  14. proto: 0x2
  15. key_mgmt: 0x2
  16. pairwise: 0x10
  17. auth_alg: 0x1
  18. PSK (from passphrase) - hexdump(len=32): [REMOVED]
  19. Priority group 0
  20.    id=0 ssid='edo'
  21. rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
  22. nl80211: Supported cipher 00-0f-ac:1
  23. nl80211: Supported cipher 00-0f-ac:5
  24. nl80211: Supported cipher 00-0f-ac:2
  25. nl80211: Supported cipher 00-0f-ac:4
  26. nl80211: Using driver-based off-channel TX
  27. nl80211: interface wlp3s0 in phy phy0
  28. nl80211: Set mode ifindex 4 iftype 2 (STATION)
  29. nl80211: Subscribe to mgmt frames with non-AP handle 0x98ef4c8
  30. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x98ef4c8 match=0801
  31. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  32. nl80211: Register frame match - hexdump(len=2): 08 01
  33. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x98ef4c8 match=06
  34. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  35. nl80211: Register frame match - hexdump(len=1): 06
  36. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x98ef4c8 match=0a07
  37. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  38. nl80211: Register frame match - hexdump(len=2): 0a 07
  39. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x98ef4c8 match=0a11
  40. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  41. nl80211: Register frame match - hexdump(len=2): 0a 11
  42. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x98ef4c8 match=1101
  43. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  44. nl80211: Register frame match - hexdump(len=2): 11 01
  45. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x98ef4c8 match=1102
  46. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  47. nl80211: Register frame match - hexdump(len=2): 11 02
  48. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x98ef4c8 match=0505
  49. nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
  50. nl80211: Register frame match - hexdump(len=2): 05 05
  51. nl80211: Failed to register Action frame processing - ignore for now
  52. netlink: Operstate: ifindex=4 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
  53. nl80211: driver param='(null)'
  54. Add interface wlp3s0 to a new radio phy0
  55. nl80211: Regulatory information - country=00
  56. nl80211: 2402-2472 @ 40 MHz 20 mBm
  57. nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR)
  58. nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
  59. nl80211: 5170-5250 @ 160 MHz 20 mBm (no IR)
  60. nl80211: 5250-5330 @ 160 MHz 20 mBm (DFS) (no IR)
  61. nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
  62. nl80211: Added 802.11b mode based on 802.11g information
  63. wlp3s0: Own MAC address: 00:21:5c:25:aa:7f
  64. wpa_driver_nl80211_set_key: ifindex=4 (wlp3s0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
  65. wpa_driver_nl80211_set_key: ifindex=4 (wlp3s0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
  66. wpa_driver_nl80211_set_key: ifindex=4 (wlp3s0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
  67. wpa_driver_nl80211_set_key: ifindex=4 (wlp3s0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
  68. wpa_driver_nl80211_set_key: ifindex=4 (wlp3s0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0
  69. wpa_driver_nl80211_set_key: ifindex=4 (wlp3s0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0
  70. wlp3s0: RSN: flushing PMKID list in the driver
  71. nl80211: Flush PMKIDs
  72. wlp3s0: Setting scan request: 0.100000 sec
  73. ENGINE: Loading dynamic engine
  74. ENGINE: Loading dynamic engine
  75. EAPOL: SUPP_PAE entering state DISCONNECTED
  76. EAPOL: Supplicant port status: Unauthorized
  77. nl80211: Skip set_supp_port(unauthorized) while not associated
  78. EAPOL: KEY_RX entering state NO_KEY_RECEIVE
  79. EAPOL: SUPP_BE entering state INITIALIZE
  80. EAP: EAP entering state DISABLED
  81. ctrl_interface_group=10 (from group name 'wheel')
  82. wlp3s0: Added interface wlp3s0
  83. wlp3s0: State: DISCONNECTED -> DISCONNECTED
  84. nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
  85. netlink: Operstate: ifindex=4 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
  86. random: Got 20/20 bytes from /dev/random
  87. wlp3s0: State: DISCONNECTED -> SCANNING
  88. wlp3s0: Starting AP scan for wildcard SSID
  89. wlp3s0: Add radio work 'scan'@0x98fe490
  90. wlp3s0: First radio work item in the queue - schedule start immediately
  91. wlp3s0: Starting radio work 'scan'@0x98fe490 after 0.000029 second wait
  92. wlp3s0: nl80211: scan request
  93. nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
  94. nl80211: Scan trigger failed: ret=-16 (Device or resource busy)
  95. wlp3s0: State: SCANNING -> DISCONNECTED
  96. nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
  97. netlink: Operstate: ifindex=4 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
  98. wlp3s0: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
  99. wlp3s0: Radio work 'scan'@0x98fe490 done in 0.000163 seconds
  100. wlp3s0: Setting scan request: 1.000000 sec
  101. EAPOL: disable timer tick
  102. wlp3s0: State: DISCONNECTED -> SCANNING
  103. wlp3s0: Starting AP scan for wildcard SSID
  104. wlp3s0: Add radio work 'scan'@0x98fe490
  105. wlp3s0: First radio work item in the queue - schedule start immediately
  106. wlp3s0: Starting radio work 'scan'@0x98fe490 after 0.000025 second wait
  107. wlp3s0: nl80211: scan request
  108. nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
  109. nl80211: Scan trigger failed: ret=-16 (Device or resource busy)
  110. wlp3s0: State: SCANNING -> DISCONNECTED
  111. nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
  112. netlink: Operstate: ifindex=4 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
  113. wlp3s0: CTRL-EVENT-SCAN-FAILED ret=-16 retry=1
  114. wlp3s0: Radio work 'scan'@0x98fe490 done in 0.000135 seconds
  115. wlp3s0: Setting scan request: 1.000000 sec
  116. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  117. nl80211: Event message available
  118. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  119. wlp3s0: nl80211: New scan results available
  120. nl80211: Scan probed for SSID ''
  121. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  122. wlp3s0: Event SCAN_RESULTS (3) received
  123. nl80211: Received scan results (11 BSSes)
  124. wlp3s0: BSS: Start scan result update 1
  125. wlp3s0: BSS: Add new id 0 BSSID c0:c1:c0:89:39:86 SSID 'edo'
  126. wlp3s0: BSS: Add new id 1 BSSID 74:44:01:35:f0:42 SSID 'NETGEAR09'
  127. wlp3s0: BSS: Add new id 2 BSSID 08:86:3b:29:51:7e SSID 'belkin.17e'
  128. wlp3s0: BSS: Add new id 3 BSSID 74:44:01:35:f0:41 SSID 'NETGEAR09-5G'
  129. wlp3s0: BSS: Add new id 4 BSSID 94:44:52:b0:13:a3 SSID 'belkin.36a6'
  130. wlp3s0: BSS: Add new id 5 BSSID b4:75:0e:22:9c:90 SSID 'belkin.c90'
  131. wlp3s0: BSS: Add new id 6 BSSID 6c:b0:ce:ee:de:4d SSID 'NETGEAR28'
  132. wlp3s0: BSS: Add new id 7 BSSID 00:24:7b:63:ce:d8 SSID 'myqwest1015'
  133. wlp3s0: BSS: Add new id 8 BSSID 00:26:f2:bc:1e:18 SSID 'Supreme'
  134. wlp3s0: BSS: Add new id 9 BSSID 00:23:69:f1:0d:b7 SSID 'linksys'
  135. wlp3s0: BSS: Add new id 10 BSSID 00:00:00:00:00:00 SSID ''
  136. BSS: last_scan_res_used=11/32
  137. wlp3s0: New scan results available (own=0 ext=0)
  138. wlp3s0: Selecting BSS from priority group 0
  139. wlp3s0: 0: c0:c1:c0:89:39:86 ssid='edo' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-16 wps
  140. wlp3s0:    selected based on RSN IE
  141. wlp3s0:    selected BSS c0:c1:c0:89:39:86 ssid='edo'
  142. wlp3s0: Considering connect request: reassociate: 0  selected: c0:c1:c0:89:39:86  bssid: 00:00:00:00:00:00  pending: 00:00:00:00:00:00  wpa_state: DISCONNECTED  ssid=0x98eee20  current_ssid=(nil)
  143. wlp3s0: Request association with c0:c1:c0:89:39:86
  144. wlp3s0: Add radio work 'sme-connect'@0x990a0e8
  145. wlp3s0: First radio work item in the queue - schedule start immediately
  146. wlp3s0: Starting radio work 'sme-connect'@0x990a0e8 after 0.000032 second wait
  147. wlp3s0: Automatic auth_alg selection: 0x1
  148. wlp3s0: Overriding auth_alg selection: 0x1
  149. RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0
  150. RSN: Search for BSSID c0:c1:c0:89:39:86
  151. RSN: No PMKSA cache entry found
  152. wlp3s0: RSN: using IEEE 802.11i/D9.0
  153. wlp3s0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
  154. wlp3s0: WPA: Selected mgmt group cipher 32
  155. wlp3s0: WPA: clearing AP WPA IE
  156. WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
  157. wlp3s0: WPA: using GTK CCMP
  158. wlp3s0: WPA: using PTK CCMP
  159. wlp3s0: WPA: using KEY_MGMT WPA-PSK
  160. wlp3s0: WPA: not using MGMT group cipher
  161. WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
  162. FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
  163. RRM: Determining whether RRM can be used - device support: 0x0
  164. RRM: No RRM in network
  165. wlp3s0: Cancelling scan request
  166. wlp3s0: SME: Trying to authenticate with c0:c1:c0:89:39:86 (SSID='edo' freq=2412 MHz)
  167. wlp3s0: State: DISCONNECTED -> AUTHENTICATING
  168. EAPOL: External notification - EAP success=0
  169. EAPOL: External notification - EAP fail=0
  170. EAPOL: External notification - portControl=Auto
  171. nl80211: Authenticate (ifindex=4)
  172.   * bssid=c0:c1:c0:89:39:86
  173.   * freq=2412
  174.   * SSID - hexdump_ascii(len=3):
  175.      65 64 6f                                          edo            
  176.   * IEs - hexdump(len=0): [NULL]
  177.   * Auth Type 0
  178. nl80211: Authentication request send successfully
  179. nl80211: Event message available
  180. nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp3s0
  181. nl80211: New station c0:c1:c0:89:39:86
  182. nl80211: Event message available
  183. nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp3s0
  184. nl80211: Delete station c0:c1:c0:89:39:86
  185. nl80211: Event message available
  186. nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp3s0
  187. nl80211: MLME event 37; timeout with c0:c1:c0:89:39:86
  188. wlp3s0: Event AUTH_TIMED_OUT (14) received
  189. wlp3s0: SME: Authentication timed out
  190. wlp3s0: Radio work 'sme-connect'@0x990a0e8 done in 0.609160 seconds
  191. Added BSSID c0:c1:c0:89:39:86 into blacklist
  192. wlp3s0: Blacklist count 1 --> request scan in 100 ms
  193. wlp3s0: Setting scan request: 0.100000 sec
  194. wlp3s0: State: AUTHENTICATING -> DISCONNECTED
  195. nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
  196. netlink: Operstate: ifindex=4 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
  197. EAPOL: External notification - portEnabled=0
  198. EAPOL: External notification - portValid=0
  199. EAPOL: External notification - EAP success=0
  200. wlp3s0: State: DISCONNECTED -> SCANNING
  201. wlp3s0: Starting AP scan for wildcard SSID
  202. wlp3s0: Add radio work 'scan'@0x990a0e8
  203. wlp3s0: First radio work item in the queue - schedule start immediately
  204. wlp3s0: Starting radio work 'scan'@0x990a0e8 after 0.000023 second wait
  205. wlp3s0: nl80211: scan request
  206. nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
  207. Scan requested (ret=0) - scan timeout 30 seconds
  208. nl80211: Event message available
  209. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  210. wlp3s0: nl80211: Scan trigger
  211. wlp3s0: Event SCAN_STARTED (47) received
  212. wlp3s0: Own scan request started a scan in 0.000065 seconds
  213. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  214. nl80211: Event message available
  215. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  216. wlp3s0: nl80211: New scan results available
  217. nl80211: Scan probed for SSID ''
  218. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  219. wlp3s0: Event SCAN_RESULTS (3) received
  220. wlp3s0: Scan completed in 1.540066 seconds
  221. nl80211: Received scan results (10 BSSes)
  222. wlp3s0: BSS: Start scan result update 2
  223. BSS: last_scan_res_used=10/32
  224. wlp3s0: New scan results available (own=1 ext=0)
  225. wlp3s0: Radio work 'scan'@0x990a0e8 done in 1.542939 seconds
  226. wlp3s0: Selecting BSS from priority group 0
  227. wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-74 wps
  228. wlp3s0:    skip - SSID mismatch
  229. wlp3s0: 1: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-86 wps
  230. wlp3s0:    skip - SSID mismatch
  231. wlp3s0: 2: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-82
  232. wlp3s0:    skip - SSID mismatch
  233. wlp3s0: 3: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-90 wps
  234. wlp3s0:    skip - SSID mismatch
  235. wlp3s0: 4: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-87 wps
  236. wlp3s0:    skip - SSID mismatch
  237. wlp3s0: 5: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
  238. wlp3s0:    skip - SSID mismatch
  239. wlp3s0: 6: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-86 wps
  240. wlp3s0:    skip - SSID mismatch
  241. wlp3s0: 7: 00:26:f2:bc:1e:18 ssid='Supreme' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-92
  242. wlp3s0:    skip - SSID mismatch
  243. wlp3s0: 8: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-89 wps
  244. wlp3s0:    skip - SSID mismatch
  245. wlp3s0: 9: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-90
  246. wlp3s0:    skip - SSID not known
  247. wlp3s0: No APs found - clear blacklist and try again
  248. Removed BSSID c0:c1:c0:89:39:86 from blacklist (clear)
  249. wlp3s0: Selecting BSS from priority group 0
  250. wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-74 wps
  251. wlp3s0:    skip - SSID mismatch
  252. wlp3s0: 1: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-86 wps
  253. wlp3s0:    skip - SSID mismatch
  254. wlp3s0: 2: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-82
  255. wlp3s0:    skip - SSID mismatch
  256. wlp3s0: 3: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-90 wps
  257. wlp3s0:    skip - SSID mismatch
  258. wlp3s0: 4: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-87 wps
  259. wlp3s0:    skip - SSID mismatch
  260. wlp3s0: 5: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
  261. wlp3s0:    skip - SSID mismatch
  262. wlp3s0: 6: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-86 wps
  263. wlp3s0:    skip - SSID mismatch
  264. wlp3s0: 7: 00:26:f2:bc:1e:18 ssid='Supreme' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-92
  265. wlp3s0:    skip - SSID mismatch
  266. wlp3s0: 8: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-89 wps
  267. wlp3s0:    skip - SSID mismatch
  268. wlp3s0: 9: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-90
  269. wlp3s0:    skip - SSID not known
  270. wlp3s0: No suitable network found
  271. wlp3s0: Setting scan request: 5.000000 sec
  272. nl80211: Event message available
  273. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  274. wlp3s0: nl80211: Scan trigger
  275. wlp3s0: Event SCAN_STARTED (47) received
  276. wlp3s0: External program started a scan
  277. nl80211: Event message available
  278. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  279. wlp3s0: nl80211: New scan results available
  280. nl80211: Scan probed for SSID ''
  281. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  282. wlp3s0: Event SCAN_RESULTS (3) received
  283. wlp3s0: Scan completed in 1.516391 seconds
  284. nl80211: Received scan results (10 BSSes)
  285. wlp3s0: BSS: Start scan result update 3
  286. wlp3s0: BSS: Remove id 0 BSSID c0:c1:c0:89:39:86 SSID 'edo' due to no match in scan
  287. BSS: last_scan_res_used=10/32
  288. wlp3s0: New scan results available (own=0 ext=1)
  289. wlp3s0: Do not use results from externally requested scan operation for network selection
  290. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  291. wlp3s0: Starting AP scan for wildcard SSID
  292. wlp3s0: Add radio work 'scan'@0x9905520
  293. wlp3s0: First radio work item in the queue - schedule start immediately
  294. wlp3s0: Starting radio work 'scan'@0x9905520 after 0.000027 second wait
  295. wlp3s0: nl80211: scan request
  296. nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
  297. Scan requested (ret=0) - scan timeout 30 seconds
  298. nl80211: Event message available
  299. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  300. wlp3s0: nl80211: Scan trigger
  301. wlp3s0: Event SCAN_STARTED (47) received
  302. wlp3s0: Own scan request started a scan in 0.000056 seconds
  303. nl80211: Event message available
  304. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  305. wlp3s0: nl80211: New scan results available
  306. nl80211: Scan probed for SSID ''
  307. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  308. wlp3s0: Event SCAN_RESULTS (3) received
  309. wlp3s0: Scan completed in 1.651572 seconds
  310. nl80211: Received scan results (10 BSSes)
  311. wlp3s0: BSS: Start scan result update 4
  312. BSS: last_scan_res_used=10/32
  313. wlp3s0: New scan results available (own=1 ext=0)
  314. wlp3s0: Radio work 'scan'@0x9905520 done in 1.654510 seconds
  315. wlp3s0: Selecting BSS from priority group 0
  316. wlp3s0: 0: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-78
  317. wlp3s0:    skip - SSID mismatch
  318. wlp3s0: 1: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-85 wps
  319. wlp3s0:    skip - SSID mismatch
  320. wlp3s0: 2: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-77 wps
  321. wlp3s0:    skip - SSID mismatch
  322. wlp3s0: 3: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-87 wps
  323. wlp3s0:    skip - SSID mismatch
  324. wlp3s0: 4: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-87 wps
  325. wlp3s0:    skip - SSID mismatch
  326. wlp3s0: 5: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x31 level=-88 wps
  327. wlp3s0:    skip - SSID mismatch
  328. wlp3s0: 6: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-86 wps
  329. wlp3s0:    skip - SSID mismatch
  330. wlp3s0: 7: 00:26:f2:bc:1e:18 ssid='Supreme' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-92
  331. wlp3s0:    skip - SSID mismatch
  332. wlp3s0: 8: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-89 wps
  333. wlp3s0:    skip - SSID mismatch
  334. wlp3s0: 9: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-90
  335. wlp3s0:    skip - SSID not known
  336. wlp3s0: No suitable network found
  337. wlp3s0: Setting scan request: 5.000000 sec
  338. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  339. nl80211: Event message available
  340. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  341. wlp3s0: nl80211: Scan trigger
  342. wlp3s0: Event SCAN_STARTED (47) received
  343. wlp3s0: External program started a scan
  344. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  345. nl80211: Event message available
  346. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  347. wlp3s0: nl80211: New scan results available
  348. nl80211: Scan probed for SSID ''
  349. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  350. wlp3s0: Event SCAN_RESULTS (3) received
  351. wlp3s0: Scan completed in 1.667510 seconds
  352. nl80211: Received scan results (9 BSSes)
  353. wlp3s0: BSS: Start scan result update 5
  354. BSS: last_scan_res_used=9/32
  355. wlp3s0: New scan results available (own=0 ext=1)
  356. wlp3s0: Do not use results from externally requested scan operation for network selection
  357. wlp3s0: Starting AP scan for wildcard SSID
  358. wlp3s0: Add radio work 'scan'@0x990a520
  359. wlp3s0: First radio work item in the queue - schedule start immediately
  360. wlp3s0: Starting radio work 'scan'@0x990a520 after 0.000028 second wait
  361. wlp3s0: nl80211: scan request
  362. nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
  363. Scan requested (ret=0) - scan timeout 30 seconds
  364. nl80211: Event message available
  365. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  366. wlp3s0: nl80211: Scan trigger
  367. wlp3s0: Event SCAN_STARTED (47) received
  368. wlp3s0: Own scan request started a scan in 0.000056 seconds
  369. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  370. nl80211: Event message available
  371. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  372. wlp3s0: nl80211: New scan results available
  373. nl80211: Scan probed for SSID ''
  374. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  375. wlp3s0: Event SCAN_RESULTS (3) received
  376. wlp3s0: Scan completed in 1.652266 seconds
  377. nl80211: Received scan results (12 BSSes)
  378. wlp3s0: BSS: Start scan result update 6
  379. wlp3s0: BSS: Add new id 11 BSSID c0:c1:c0:89:39:86 SSID 'edo'
  380. wlp3s0: BSS: Add new id 12 BSSID 04:a1:51:a0:8b:d9 SSID 'NETGEAR11'
  381. wlp3s0: BSS: Add new id 13 BSSID 30:46:9a:64:1e:f7 SSID 'iamGroot'
  382. wlp3s0: BSS: Remove id 8 BSSID 00:26:f2:bc:1e:18 SSID 'Supreme' due to no match in scan
  383. BSS: last_scan_res_used=12/32
  384. wlp3s0: New scan results available (own=1 ext=0)
  385. wlp3s0: Radio work 'scan'@0x990a520 done in 1.655062 seconds
  386. wlp3s0: Selecting BSS from priority group 0
  387. wlp3s0: 0: c0:c1:c0:89:39:86 ssid='edo' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-69 wps
  388. wlp3s0:    selected based on RSN IE
  389. wlp3s0:    selected BSS c0:c1:c0:89:39:86 ssid='edo'
  390. wlp3s0: Considering connect request: reassociate: 0  selected: c0:c1:c0:89:39:86  bssid: 00:00:00:00:00:00  pending: 00:00:00:00:00:00  wpa_state: SCANNING  ssid=0x98eee20  current_ssid=(nil)
  391. wlp3s0: Request association with c0:c1:c0:89:39:86
  392. wlp3s0: Re-association to the same ESS
  393. wlp3s0: Add radio work 'sme-connect'@0x990a520
  394. wlp3s0: First radio work item in the queue - schedule start immediately
  395. RSN: Ignored PMKID candidate without preauth flag
  396. wlp3s0: Starting radio work 'sme-connect'@0x990a520 after 0.000037 second wait
  397. wlp3s0: Automatic auth_alg selection: 0x1
  398. wlp3s0: Overriding auth_alg selection: 0x1
  399. RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0
  400. RSN: Search for BSSID c0:c1:c0:89:39:86
  401. RSN: No PMKSA cache entry found
  402. wlp3s0: RSN: using IEEE 802.11i/D9.0
  403. wlp3s0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
  404. wlp3s0: WPA: Selected mgmt group cipher 32
  405. wlp3s0: WPA: clearing AP WPA IE
  406. WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
  407. wlp3s0: WPA: using GTK CCMP
  408. wlp3s0: WPA: using PTK CCMP
  409. wlp3s0: WPA: using KEY_MGMT WPA-PSK
  410. wlp3s0: WPA: not using MGMT group cipher
  411. WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
  412. FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
  413. RRM: Determining whether RRM can be used - device support: 0x0
  414. RRM: No RRM in network
  415. wlp3s0: Cancelling scan request
  416. wlp3s0: SME: Trying to authenticate with c0:c1:c0:89:39:86 (SSID='edo' freq=2412 MHz)
  417. wlp3s0: State: SCANNING -> AUTHENTICATING
  418. EAPOL: External notification - EAP success=0
  419. EAPOL: External notification - EAP fail=0
  420. EAPOL: External notification - portControl=Auto
  421. nl80211: Authenticate (ifindex=4)
  422.   * bssid=c0:c1:c0:89:39:86
  423.   * freq=2412
  424.   * SSID - hexdump_ascii(len=3):
  425.      65 64 6f                                          edo            
  426.   * IEs - hexdump(len=0): [NULL]
  427.   * Auth Type 0
  428. nl80211: Authentication request send successfully
  429. nl80211: Event message available
  430. nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp3s0
  431. nl80211: New station c0:c1:c0:89:39:86
  432. nl80211: Event message available
  433. nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp3s0
  434. nl80211: Delete station c0:c1:c0:89:39:86
  435. nl80211: Event message available
  436. nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp3s0
  437. nl80211: MLME event 37; timeout with c0:c1:c0:89:39:86
  438. wlp3s0: Event AUTH_TIMED_OUT (14) received
  439. wlp3s0: SME: Authentication timed out
  440. wlp3s0: Radio work 'sme-connect'@0x990a520 done in 0.608447 seconds
  441. Added BSSID c0:c1:c0:89:39:86 into blacklist
  442. wlp3s0: Blacklist count 2 --> request scan in 500 ms
  443. wlp3s0: Setting scan request: 0.500000 sec
  444. wlp3s0: State: AUTHENTICATING -> DISCONNECTED
  445. nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
  446. netlink: Operstate: ifindex=4 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
  447. EAPOL: External notification - portEnabled=0
  448. EAPOL: External notification - portValid=0
  449. EAPOL: External notification - EAP success=0
  450. wlp3s0: State: DISCONNECTED -> SCANNING
  451. wlp3s0: Starting AP scan for wildcard SSID
  452. wlp3s0: Add radio work 'scan'@0x990a520
  453. wlp3s0: First radio work item in the queue - schedule start immediately
  454. wlp3s0: Starting radio work 'scan'@0x990a520 after 0.000026 second wait
  455. wlp3s0: nl80211: scan request
  456. nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
  457. Scan requested (ret=0) - scan timeout 30 seconds
  458. nl80211: Event message available
  459. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  460. wlp3s0: nl80211: Scan trigger
  461. wlp3s0: Event SCAN_STARTED (47) received
  462. wlp3s0: Own scan request started a scan in 0.000105 seconds
  463. nl80211: Event message available
  464. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  465. wlp3s0: nl80211: New scan results available
  466. nl80211: Scan probed for SSID ''
  467. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  468. wlp3s0: Event SCAN_RESULTS (3) received
  469. wlp3s0: Scan completed in 1.303324 seconds
  470. nl80211: Received scan results (11 BSSes)
  471. wlp3s0: BSS: Start scan result update 7
  472. BSS: last_scan_res_used=11/32
  473. wlp3s0: New scan results available (own=1 ext=0)
  474. wlp3s0: Radio work 'scan'@0x990a520 done in 1.552614 seconds
  475. wlp3s0: Selecting BSS from priority group 0
  476. wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-65 wps
  477. wlp3s0:    skip - SSID mismatch
  478. wlp3s0: 1: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-78
  479. wlp3s0:    skip - SSID mismatch
  480. wlp3s0: 2: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-89 wps
  481. wlp3s0:    skip - SSID mismatch
  482. wlp3s0: 3: 04:a1:51:a0:8b:d9 ssid='NETGEAR11' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-86 wps
  483. wlp3s0:    skip - SSID mismatch
  484. wlp3s0: 4: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x31 level=-88 wps
  485. wlp3s0:    skip - SSID mismatch
  486. wlp3s0: 5: 30:46:9a:64:1e:f7 ssid='iamGroot' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
  487. wlp3s0:    skip - SSID mismatch
  488. wlp3s0: 6: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-89 wps
  489. wlp3s0:    skip - SSID mismatch
  490. wlp3s0: 7: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-87 wps
  491. wlp3s0:    skip - SSID mismatch
  492. wlp3s0: 8: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-89 wps
  493. wlp3s0:    skip - SSID mismatch
  494. wlp3s0: 9: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x411 level=-87
  495. wlp3s0:    skip - SSID not known
  496. wlp3s0: 10: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-88 wps
  497. wlp3s0:    skip - SSID mismatch
  498. wlp3s0: No APs found - clear blacklist and try again
  499. Removed BSSID c0:c1:c0:89:39:86 from blacklist (clear)
  500. wlp3s0: Selecting BSS from priority group 0
  501. wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-65 wps
  502. wlp3s0:    skip - SSID mismatch
  503. wlp3s0: 1: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-78
  504. wlp3s0:    skip - SSID mismatch
  505. wlp3s0: 2: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-89 wps
  506. wlp3s0:    skip - SSID mismatch
  507. wlp3s0: 3: 04:a1:51:a0:8b:d9 ssid='NETGEAR11' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-86 wps
  508. wlp3s0:    skip - SSID mismatch
  509. wlp3s0: 4: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x31 level=-88 wps
  510. wlp3s0:    skip - SSID mismatch
  511. wlp3s0: 5: 30:46:9a:64:1e:f7 ssid='iamGroot' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
  512. wlp3s0:    skip - SSID mismatch
  513. wlp3s0: 6: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-89 wps
  514. wlp3s0:    skip - SSID mismatch
  515. wlp3s0: 7: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-87 wps
  516. wlp3s0:    skip - SSID mismatch
  517. wlp3s0: 8: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-89 wps
  518. wlp3s0:    skip - SSID mismatch
  519. wlp3s0: 9: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x411 level=-87
  520. wlp3s0:    skip - SSID not known
  521. wlp3s0: 10: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-88 wps
  522. wlp3s0:    skip - SSID mismatch
  523. wlp3s0: No suitable network found
  524. wlp3s0: Setting scan request: 5.000000 sec
  525. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  526. nl80211: Event message available
  527. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  528. wlp3s0: nl80211: Scan trigger
  529. wlp3s0: Event SCAN_STARTED (47) received
  530. wlp3s0: External program started a scan
  531. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  532. nl80211: Event message available
  533. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  534. wlp3s0: nl80211: New scan results available
  535. nl80211: Scan probed for SSID ''
  536. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  537. wlp3s0: Event SCAN_RESULTS (3) received
  538. wlp3s0: Scan completed in 1.635403 seconds
  539. nl80211: Received scan results (11 BSSes)
  540. wlp3s0: BSS: Start scan result update 8
  541. wlp3s0: BSS: Remove id 11 BSSID c0:c1:c0:89:39:86 SSID 'edo' due to no match in scan
  542. BSS: last_scan_res_used=11/32
  543. wlp3s0: New scan results available (own=0 ext=1)
  544. wlp3s0: Do not use results from externally requested scan operation for network selection
  545. wlp3s0: Starting AP scan for wildcard SSID
  546. wlp3s0: Add radio work 'scan'@0x9905760
  547. wlp3s0: First radio work item in the queue - schedule start immediately
  548. wlp3s0: Starting radio work 'scan'@0x9905760 after 0.000028 second wait
  549. wlp3s0: nl80211: scan request
  550. nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
  551. Scan requested (ret=0) - scan timeout 30 seconds
  552. nl80211: Event message available
  553. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  554. wlp3s0: nl80211: Scan trigger
  555. wlp3s0: Event SCAN_STARTED (47) received
  556. wlp3s0: Own scan request started a scan in 0.000056 seconds
  557. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  558. nl80211: Event message available
  559. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  560. wlp3s0: nl80211: New scan results available
  561. nl80211: Scan probed for SSID ''
  562. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  563. wlp3s0: Event SCAN_RESULTS (3) received
  564. wlp3s0: Scan completed in 1.546610 seconds
  565. nl80211: Received scan results (11 BSSes)
  566. wlp3s0: BSS: Start scan result update 9
  567. BSS: last_scan_res_used=11/32
  568. wlp3s0: New scan results available (own=1 ext=0)
  569. wlp3s0: Radio work 'scan'@0x9905760 done in 1.549722 seconds
  570. wlp3s0: Selecting BSS from priority group 0
  571. wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-71 wps
  572. wlp3s0:    skip - SSID mismatch
  573. wlp3s0: 1: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-84
  574. wlp3s0:    skip - SSID mismatch
  575. wlp3s0: 2: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-90 wps
  576. wlp3s0:    skip - SSID mismatch
  577. wlp3s0: 3: 04:a1:51:a0:8b:d9 ssid='NETGEAR11' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-86 wps
  578. wlp3s0:    skip - SSID mismatch
  579. wlp3s0: 4: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-88 wps
  580. wlp3s0:    skip - SSID mismatch
  581. wlp3s0: 5: 30:46:9a:64:1e:f7 ssid='iamGroot' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
  582. wlp3s0:    skip - SSID mismatch
  583. wlp3s0: 6: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-89 wps
  584. wlp3s0:    skip - SSID mismatch
  585. wlp3s0: 7: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-90 wps
  586. wlp3s0:    skip - SSID mismatch
  587. wlp3s0: 8: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-87 wps
  588. wlp3s0:    skip - SSID mismatch
  589. wlp3s0: 9: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x411 level=-88
  590. wlp3s0:    skip - SSID not known
  591. wlp3s0: 10: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-88 wps
  592. wlp3s0:    skip - SSID mismatch
  593. wlp3s0: No suitable network found
  594. wlp3s0: Setting scan request: 5.000000 sec
  595. nl80211: Event message available
  596. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  597. wlp3s0: nl80211: Scan trigger
  598. wlp3s0: Event SCAN_STARTED (47) received
  599. wlp3s0: External program started a scan
  600. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  601. nl80211: Event message available
  602. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  603. wlp3s0: nl80211: New scan results available
  604. nl80211: Scan probed for SSID ''
  605. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  606. wlp3s0: Event SCAN_RESULTS (3) received
  607. wlp3s0: Scan completed in 1.551094 seconds
  608. nl80211: Received scan results (12 BSSes)
  609. wlp3s0: BSS: Start scan result update 10
  610. wlp3s0: BSS: Add new id 14 BSSID 00:26:f2:bc:1e:18 SSID 'Supreme'
  611. BSS: last_scan_res_used=12/32
  612. wlp3s0: New scan results available (own=0 ext=1)
  613. wlp3s0: Do not use results from externally requested scan operation for network selection
  614. wlp3s0: Starting AP scan for wildcard SSID
  615. wlp3s0: Add radio work 'scan'@0x9900250
  616. wlp3s0: First radio work item in the queue - schedule start immediately
  617. wlp3s0: Starting radio work 'scan'@0x9900250 after 0.000028 second wait
  618. wlp3s0: nl80211: scan request
  619. nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
  620. Scan requested (ret=0) - scan timeout 30 seconds
  621. nl80211: Event message available
  622. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  623. wlp3s0: nl80211: Scan trigger
  624. wlp3s0: Event SCAN_STARTED (47) received
  625. wlp3s0: Own scan request started a scan in 0.000059 seconds
  626. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  627. nl80211: Event message available
  628. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  629. wlp3s0: nl80211: New scan results available
  630. nl80211: Scan probed for SSID ''
  631. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  632. wlp3s0: Event SCAN_RESULTS (3) received
  633. wlp3s0: Scan completed in 1.548883 seconds
  634. nl80211: Received scan results (12 BSSes)
  635. wlp3s0: BSS: Start scan result update 11
  636. BSS: last_scan_res_used=12/32
  637. wlp3s0: New scan results available (own=1 ext=0)
  638. wlp3s0: Radio work 'scan'@0x9900250 done in 1.551710 seconds
  639. wlp3s0: Selecting BSS from priority group 0
  640. wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-71 wps
  641. wlp3s0:    skip - SSID mismatch
  642. wlp3s0: 1: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-82
  643. wlp3s0:    skip - SSID mismatch
  644. wlp3s0: 2: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-89 wps
  645. wlp3s0:    skip - SSID mismatch
  646. wlp3s0: 3: 04:a1:51:a0:8b:d9 ssid='NETGEAR11' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
  647. wlp3s0:    skip - SSID mismatch
  648. wlp3s0: 4: 30:46:9a:64:1e:f7 ssid='iamGroot' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
  649. wlp3s0:    skip - SSID mismatch
  650. wlp3s0: 5: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-89 wps
  651. wlp3s0:    skip - SSID mismatch
  652. wlp3s0: 6: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-89 wps
  653. wlp3s0:    skip - SSID mismatch
  654. wlp3s0: 7: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-90 wps
  655. wlp3s0:    skip - SSID mismatch
  656. wlp3s0: 8: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-87 wps
  657. wlp3s0:    skip - SSID mismatch
  658. wlp3s0: 9: 00:26:f2:bc:1e:18 ssid='Supreme' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-91
  659. wlp3s0:    skip - SSID mismatch
  660. wlp3s0: 10: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x411 level=-87
  661. wlp3s0:    skip - SSID not known
  662. wlp3s0: 11: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-88 wps
  663. wlp3s0:    skip - SSID mismatch
  664. wlp3s0: No suitable network found
  665. wlp3s0: Setting scan request: 5.000000 sec
  666. nl80211: Event message available
  667. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  668. wlp3s0: nl80211: Scan trigger
  669. wlp3s0: Event SCAN_STARTED (47) received
  670. wlp3s0: External program started a scan
  671. nl80211: Event message available
  672. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  673. wlp3s0: nl80211: New scan results available
  674. nl80211: Scan probed for SSID ''
  675. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  676. wlp3s0: Event SCAN_RESULTS (3) received
  677. wlp3s0: Scan completed in 1.624560 seconds
  678. nl80211: send_and_recv->nl_recvmsgs failed: -33
  679. nl80211: Received scan results (12 BSSes)
  680. wlp3s0: BSS: Start scan result update 12
  681. BSS: last_scan_res_used=12/32
  682. wlp3s0: New scan results available (own=0 ext=1)
  683. wlp3s0: Do not use results from externally requested scan operation for network selection
  684. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  685. wlp3s0: Starting AP scan for wildcard SSID
  686. wlp3s0: Add radio work 'scan'@0x9905538
  687. wlp3s0: First radio work item in the queue - schedule start immediately
  688. wlp3s0: Starting radio work 'scan'@0x9905538 after 0.000028 second wait
  689. wlp3s0: nl80211: scan request
  690. nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
  691. Scan requested (ret=0) - scan timeout 30 seconds
  692. nl80211: Event message available
  693. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  694. wlp3s0: nl80211: Scan trigger
  695. wlp3s0: Event SCAN_STARTED (47) received
  696. wlp3s0: Own scan request started a scan in 0.000098 seconds
  697. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  698. nl80211: Event message available
  699. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  700. wlp3s0: nl80211: New scan results available
  701. nl80211: Scan probed for SSID ''
  702. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  703. wlp3s0: Event SCAN_RESULTS (3) received
  704. wlp3s0: Scan completed in 1.546844 seconds
  705. nl80211: Received scan results (12 BSSes)
  706. wlp3s0: BSS: Start scan result update 13
  707. BSS: last_scan_res_used=12/32
  708. wlp3s0: New scan results available (own=1 ext=0)
  709. wlp3s0: Radio work 'scan'@0x9905538 done in 1.549989 seconds
  710. wlp3s0: Selecting BSS from priority group 0
  711. wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-66 wps
  712. wlp3s0:    skip - SSID mismatch
  713. wlp3s0: 1: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-86
  714. wlp3s0:    skip - SSID mismatch
  715. wlp3s0: 2: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-90 wps
  716. wlp3s0:    skip - SSID mismatch
  717. wlp3s0: 3: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
  718. wlp3s0:    skip - SSID mismatch
  719. wlp3s0: 4: 04:a1:51:a0:8b:d9 ssid='NETGEAR11' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
  720. wlp3s0:    skip - SSID mismatch
  721. wlp3s0: 5: 30:46:9a:64:1e:f7 ssid='iamGroot' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
  722. wlp3s0:    skip - SSID mismatch
  723. wlp3s0: 6: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-89 wps
  724. wlp3s0:    skip - SSID mismatch
  725. wlp3s0: 7: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-90 wps
  726. wlp3s0:    skip - SSID mismatch
  727. wlp3s0: 8: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-86 wps
  728. wlp3s0:    skip - SSID mismatch
  729. wlp3s0: 9: 00:26:f2:bc:1e:18 ssid='Supreme' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-91
  730. wlp3s0:    skip - SSID mismatch
  731. wlp3s0: 10: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x411 level=-82
  732. wlp3s0:    skip - SSID not known
  733. wlp3s0: 11: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-88 wps
  734. wlp3s0:    skip - SSID mismatch
  735. wlp3s0: No suitable network found
  736. wlp3s0: Setting scan request: 5.000000 sec
  737. nl80211: Event message available
  738. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  739. wlp3s0: nl80211: Scan trigger
  740. wlp3s0: Event SCAN_STARTED (47) received
  741. wlp3s0: External program started a scan
  742. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  743. nl80211: Event message available
  744. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  745. wlp3s0: nl80211: New scan results available
  746. nl80211: Scan probed for SSID ''
  747. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  748. wlp3s0: Event SCAN_RESULTS (3) received
  749. wlp3s0: Scan completed in 1.578336 seconds
  750. nl80211: Received scan results (13 BSSes)
  751. wlp3s0: BSS: Start scan result update 14
  752. wlp3s0: BSS: Add new id 15 BSSID 94:44:52:ba:23:a5 SSID 'belkin.36a3'
  753. BSS: last_scan_res_used=13/32
  754. wlp3s0: New scan results available (own=0 ext=1)
  755. wlp3s0: Do not use results from externally requested scan operation for network selection
  756. wlp3s0: Starting AP scan for wildcard SSID
  757. wlp3s0: Add radio work 'scan'@0x990a520
  758. wlp3s0: First radio work item in the queue - schedule start immediately
  759. wlp3s0: Starting radio work 'scan'@0x990a520 after 0.000028 second wait
  760. wlp3s0: nl80211: scan request
  761. nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
  762. Scan requested (ret=0) - scan timeout 30 seconds
  763. nl80211: Event message available
  764. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  765. wlp3s0: nl80211: Scan trigger
  766. wlp3s0: Event SCAN_STARTED (47) received
  767. wlp3s0: Own scan request started a scan in 0.000066 seconds
  768. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  769. nl80211: Event message available
  770. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  771. wlp3s0: nl80211: New scan results available
  772. nl80211: Scan probed for SSID ''
  773. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  774. wlp3s0: Event SCAN_RESULTS (3) received
  775. wlp3s0: Scan completed in 1.546494 seconds
  776. nl80211: Received scan results (12 BSSes)
  777. wlp3s0: BSS: Start scan result update 15
  778. BSS: last_scan_res_used=12/32
  779. wlp3s0: New scan results available (own=1 ext=0)
  780. wlp3s0: Radio work 'scan'@0x990a520 done in 1.549368 seconds
  781. wlp3s0: Selecting BSS from priority group 0
  782. wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-69 wps
  783. wlp3s0:    skip - SSID mismatch
  784. wlp3s0: 1: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-89 wps
  785. wlp3s0:    skip - SSID mismatch
  786. wlp3s0: 2: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-86
  787. wlp3s0:    skip - SSID mismatch
  788. wlp3s0: 3: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-86 wps
  789. wlp3s0:    skip - SSID mismatch
  790. wlp3s0: 4: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-89 wps
  791. wlp3s0:    skip - SSID mismatch
  792. wlp3s0: 5: 94:44:52:ba:23:a5 ssid='belkin.36a3' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-91 wps
  793. wlp3s0:    skip - SSID mismatch
  794. wlp3s0: 6: 04:a1:51:a0:8b:d9 ssid='NETGEAR11' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
  795. wlp3s0:    skip - SSID mismatch
  796. wlp3s0: 7: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-91 wps
  797. wlp3s0:    skip - SSID mismatch
  798. wlp3s0: 8: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-86 wps
  799. wlp3s0:    skip - SSID mismatch
  800. wlp3s0: 9: 00:26:f2:bc:1e:18 ssid='Supreme' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-91
  801. wlp3s0:    skip - SSID mismatch
  802. wlp3s0: 10: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-88 wps
  803. wlp3s0:    skip - SSID mismatch
  804. wlp3s0: 11: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-88
  805. wlp3s0:    skip - SSID not known
  806. wlp3s0: No suitable network found
  807. wlp3s0: Setting scan request: 5.000000 sec
  808. nl80211: Event message available
  809. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  810. wlp3s0: nl80211: Scan trigger
  811. wlp3s0: Event SCAN_STARTED (47) received
  812. wlp3s0: External program started a scan
  813. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  814. nl80211: Event message available
  815. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  816. wlp3s0: nl80211: New scan results available
  817. nl80211: Scan probed for SSID ''
  818. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  819. wlp3s0: Event SCAN_RESULTS (3) received
  820. wlp3s0: Scan completed in 1.550425 seconds
  821. nl80211: Received scan results (12 BSSes)
  822. wlp3s0: BSS: Start scan result update 16
  823. wlp3s0: BSS: Remove id 13 BSSID 30:46:9a:64:1e:f7 SSID 'iamGroot' due to no match in scan
  824. BSS: last_scan_res_used=12/32
  825. wlp3s0: New scan results available (own=0 ext=1)
  826. wlp3s0: Do not use results from externally requested scan operation for network selection
  827. wlp3s0: Starting AP scan for wildcard SSID
  828. wlp3s0: Add radio work 'scan'@0x9905538
  829. wlp3s0: First radio work item in the queue - schedule start immediately
  830. wlp3s0: Starting radio work 'scan'@0x9905538 after 0.000026 second wait
  831. wlp3s0: nl80211: scan request
  832. nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
  833. Scan requested (ret=0) - scan timeout 30 seconds
  834. nl80211: Event message available
  835. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  836. wlp3s0: nl80211: Scan trigger
  837. wlp3s0: Event SCAN_STARTED (47) received
  838. wlp3s0: Own scan request started a scan in 0.000056 seconds
  839. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  840. nl80211: Event message available
  841. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  842. wlp3s0: nl80211: New scan results available
  843. nl80211: Scan probed for SSID ''
  844. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  845. wlp3s0: Event SCAN_RESULTS (3) received
  846. wlp3s0: Scan completed in 1.652180 seconds
  847. nl80211: Received scan results (12 BSSes)
  848. wlp3s0: BSS: Start scan result update 17
  849. BSS: last_scan_res_used=12/32
  850. wlp3s0: New scan results available (own=1 ext=0)
  851. wlp3s0: Radio work 'scan'@0x9905538 done in 1.654989 seconds
  852. wlp3s0: Selecting BSS from priority group 0
  853. wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-67 wps
  854. wlp3s0:    skip - SSID mismatch
  855. wlp3s0: 1: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-82
  856. wlp3s0:    skip - SSID mismatch
  857. wlp3s0: 2: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-88 wps
  858. wlp3s0:    skip - SSID mismatch
  859. wlp3s0: 3: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-88 wps
  860. wlp3s0:    skip - SSID mismatch
  861. wlp3s0: 4: 94:44:52:ba:23:a5 ssid='belkin.36a3' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-91 wps
  862. wlp3s0:    skip - SSID mismatch
  863. wlp3s0: 5: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x31 level=-87 wps
  864. wlp3s0:    skip - SSID mismatch
  865. wlp3s0: 6: 04:a1:51:a0:8b:d9 ssid='NETGEAR11' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-88 wps
  866. wlp3s0:    skip - SSID mismatch
  867. wlp3s0: 7: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-92 wps
  868. wlp3s0:    skip - SSID mismatch
  869. wlp3s0: 8: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-88 wps
  870. wlp3s0:    skip - SSID mismatch
  871. wlp3s0: 9: 00:26:f2:bc:1e:18 ssid='Supreme' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-91
  872. wlp3s0:    skip - SSID mismatch
  873. wlp3s0: 10: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x411 level=-88
  874. wlp3s0:    skip - SSID not known
  875. wlp3s0: 11: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-90 wps
  876. wlp3s0:    skip - SSID mismatch
  877. wlp3s0: No suitable network found
  878. wlp3s0: Setting scan request: 5.000000 sec
  879. nl80211: Event message available
  880. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  881. wlp3s0: nl80211: Scan trigger
  882. wlp3s0: Event SCAN_STARTED (47) received
  883. wlp3s0: External program started a scan
  884. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  885. nl80211: Event message available
  886. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  887. wlp3s0: nl80211: New scan results available
  888. nl80211: Scan probed for SSID ''
  889. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  890. wlp3s0: Event SCAN_RESULTS (3) received
  891. wlp3s0: Scan completed in 1.550013 seconds
  892. nl80211: Received scan results (12 BSSes)
  893. wlp3s0: BSS: Start scan result update 18
  894. BSS: last_scan_res_used=12/32
  895. wlp3s0: New scan results available (own=0 ext=1)
  896. wlp3s0: Do not use results from externally requested scan operation for network selection
  897. wlp3s0: Starting AP scan for wildcard SSID
  898. wlp3s0: Add radio work 'scan'@0x9905538
  899. wlp3s0: First radio work item in the queue - schedule start immediately
  900. wlp3s0: Starting radio work 'scan'@0x9905538 after 0.000028 second wait
  901. wlp3s0: nl80211: scan request
  902. nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
  903. Scan requested (ret=0) - scan timeout 30 seconds
  904. nl80211: Event message available
  905. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  906. wlp3s0: nl80211: Scan trigger
  907. wlp3s0: Event SCAN_STARTED (47) received
  908. wlp3s0: Own scan request started a scan in 0.000190 seconds
  909. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  910. nl80211: Event message available
  911. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  912. wlp3s0: nl80211: New scan results available
  913. nl80211: Scan probed for SSID ''
  914. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  915. wlp3s0: Event SCAN_RESULTS (3) received
  916. wlp3s0: Scan completed in 1.649348 seconds
  917. nl80211: Received scan results (11 BSSes)
  918. wlp3s0: BSS: Start scan result update 19
  919. wlp3s0: BSS: Add new id 16 BSSID 00:71:c2:e2:53:ca SSID 'xfinitywifi'
  920. BSS: last_scan_res_used=11/32
  921. wlp3s0: New scan results available (own=1 ext=0)
  922. wlp3s0: Radio work 'scan'@0x9905538 done in 1.654481 seconds
  923. wlp3s0: Selecting BSS from priority group 0
  924. wlp3s0: 0: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-71 wps
  925. wlp3s0:    skip - SSID mismatch
  926. wlp3s0: 1: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-88 wps
  927. wlp3s0:    skip - SSID mismatch
  928. wlp3s0: 2: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-84
  929. wlp3s0:    skip - SSID mismatch
  930. wlp3s0: 3: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-89 wps
  931. wlp3s0:    skip - SSID mismatch
  932. wlp3s0: 4: 94:44:52:ba:23:a5 ssid='belkin.36a3' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-91 wps
  933. wlp3s0:    skip - SSID mismatch
  934. wlp3s0: 5: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-87 wps
  935. wlp3s0:    skip - SSID mismatch
  936. wlp3s0: 6: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x31 level=-87 wps
  937. wlp3s0:    skip - SSID mismatch
  938. wlp3s0: 7: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-87 wps
  939. wlp3s0:    skip - SSID mismatch
  940. wlp3s0: 8: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x411 level=-84
  941. wlp3s0:    skip - SSID not known
  942. wlp3s0: 9: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-90 wps
  943. wlp3s0:    skip - SSID mismatch
  944. wlp3s0: 10: 00:71:c2:e2:53:ca ssid='xfinitywifi' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-93
  945. wlp3s0:    skip - SSID mismatch
  946. wlp3s0: No suitable network found
  947. wlp3s0: Setting scan request: 5.000000 sec
  948. nl80211: Event message available
  949. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  950. wlp3s0: nl80211: Scan trigger
  951. wlp3s0: Event SCAN_STARTED (47) received
  952. wlp3s0: External program started a scan
  953. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  954. nl80211: Event message available
  955. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  956. wlp3s0: nl80211: New scan results available
  957. nl80211: Scan probed for SSID ''
  958. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  959. wlp3s0: Event SCAN_RESULTS (3) received
  960. wlp3s0: Scan completed in 1.635224 seconds
  961. nl80211: Received scan results (11 BSSes)
  962. wlp3s0: BSS: Start scan result update 20
  963. wlp3s0: BSS: Remove id 12 BSSID 04:a1:51:a0:8b:d9 SSID 'NETGEAR11' due to no match in scan
  964. wlp3s0: BSS: Remove id 14 BSSID 00:26:f2:bc:1e:18 SSID 'Supreme' due to no match in scan
  965. BSS: last_scan_res_used=11/32
  966. wlp3s0: New scan results available (own=0 ext=1)
  967. wlp3s0: Do not use results from externally requested scan operation for network selection
  968. wlp3s0: Starting AP scan for wildcard SSID
  969. wlp3s0: Add radio work 'scan'@0x98efad8
  970. wlp3s0: First radio work item in the queue - schedule start immediately
  971. wlp3s0: Starting radio work 'scan'@0x98efad8 after 0.000028 second wait
  972. wlp3s0: nl80211: scan request
  973. nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
  974. Scan requested (ret=0) - scan timeout 30 seconds
  975. nl80211: Event message available
  976. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  977. wlp3s0: nl80211: Scan trigger
  978. wlp3s0: Event SCAN_STARTED (47) received
  979. wlp3s0: Own scan request started a scan in 0.000059 seconds
  980. RTM_NEWLINK: ifi_index=4 ifname=wlp3s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
  981. nl80211: Event message available
  982. nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp3s0
  983. wlp3s0: nl80211: New scan results available
  984. nl80211: Scan probed for SSID ''
  985. nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5200 5220 5240 5260 5280 5300 5320 5745 5765 5785 5805 5825
  986. wlp3s0: Event SCAN_RESULTS (3) received
  987. wlp3s0: Scan completed in 1.646992 seconds
  988. nl80211: Received scan results (11 BSSes)
  989. wlp3s0: BSS: Start scan result update 21
  990. BSS: last_scan_res_used=11/32
  991. wlp3s0: New scan results available (own=1 ext=0)
  992. wlp3s0: Radio work 'scan'@0x98efad8 done in 1.652111 seconds
  993. wlp3s0: Selecting BSS from priority group 0
  994. wlp3s0: 0: 08:86:3b:29:51:7e ssid='belkin.17e' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-83
  995. wlp3s0:    skip - SSID mismatch
  996. wlp3s0: 1: 74:44:01:35:f0:42 ssid='NETGEAR09' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-79 wps
  997. wlp3s0:    skip - SSID mismatch
  998. wlp3s0: 2: 74:44:01:35:f0:41 ssid='NETGEAR09-5G' wpa_ie_len=0 rsn_ie_len=20 caps=0x11 level=-91 wps
  999. wlp3s0:    skip - SSID mismatch
  1000. wlp3s0: 3: 94:44:52:b0:13:a3 ssid='belkin.36a6' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-87 wps
  1001. wlp3s0:    skip - SSID mismatch
  1002. wlp3s0: 4: 94:44:52:ba:23:a5 ssid='belkin.36a3' wpa_ie_len=22 rsn_ie_len=20 caps=0x411 level=-91 wps
  1003. wlp3s0:    skip - SSID mismatch
  1004. wlp3s0: 5: 00:24:7b:63:ce:d8 ssid='myqwest1015' wpa_ie_len=24 rsn_ie_len=20 caps=0x411 level=-84 wps
  1005. wlp3s0:    skip - SSID mismatch
  1006. wlp3s0: 6: b4:75:0e:22:9c:90 ssid='belkin.c90' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-89 wps
  1007. wlp3s0:    skip - SSID mismatch
  1008. wlp3s0: 7: 6c:b0:ce:ee:de:4d ssid='NETGEAR28' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-91 wps
  1009. wlp3s0:    skip - SSID mismatch
  1010. wlp3s0: 8: 00:00:00:00:00:00 ssid='' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-89
  1011. wlp3s0:    skip - SSID not known
  1012. wlp3s0: 9: 00:23:69:f1:0d:b7 ssid='linksys' wpa_ie_len=0 rsn_ie_len=0 caps=0x401 level=-90 wps
  1013. wlp3s0:    skip - SSID mismatch
  1014. wlp3s0: 10: 00:71:c2:e2:53:ca ssid='xfinitywifi' wpa_ie_len=0 rsn_ie_len=0 caps=0x421 level=-93
  1015. wlp3s0:    skip - SSID mismatch
  1016. wlp3s0: No suitable network found
  1017. wlp3s0: Setting scan request: 5.000000 sec
  1018. nl80211: Event message available
  1019. nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp3s0
  1020. wlp3s0: nl80211: Scan trigger
  1021. wlp3s0: Event SCAN_STARTED (47) received
  1022. wlp3s0: External program started a scan
  1023. wlp3s0: Removing interface wlp3s0
  1024. wlp3s0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 state=SCANNING
  1025. wlp3s0: State: SCANNING -> DISCONNECTED
  1026. nl80211: Set wlp3s0 operstate 0->0 (DORMANT)
  1027. netlink: Operstate: ifindex=4 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
  1028. EAPOL: External notification - portEnabled=0
  1029. EAPOL: External notification - portValid=0
  1030. wlp3s0: WPA: Clear old PMK and PTK
  1031. wlp3s0: BSS: Remove id 2 BSSID 08:86:3b:29:51:7e SSID 'belkin.17e' due to wpa_bss_flush
  1032. wlp3s0: BSS: Remove id 1 BSSID 74:44:01:35:f0:42 SSID 'NETGEAR09' due to wpa_bss_flush
  1033. wlp3s0: BSS: Remove id 3 BSSID 74:44:01:35:f0:41 SSID 'NETGEAR09-5G' due to wpa_bss_flush
  1034. wlp3s0: BSS: Remove id 4 BSSID 94:44:52:b0:13:a3 SSID 'belkin.36a6' due to wpa_bss_flush
  1035. wlp3s0: BSS: Remove id 15 BSSID 94:44:52:ba:23:a5 SSID 'belkin.36a3' due to wpa_bss_flush
  1036. wlp3s0: BSS: Remove id 7 BSSID 00:24:7b:63:ce:d8 SSID 'myqwest1015' due to wpa_bss_flush
  1037. wlp3s0: BSS: Remove id 5 BSSID b4:75:0e:22:9c:90 SSID 'belkin.c90' due to wpa_bss_flush
  1038. wlp3s0: BSS: Remove id 6 BSSID 6c:b0:ce:ee:de:4d SSID 'NETGEAR28' due to wpa_bss_flush
  1039. wlp3s0: BSS: Remove id 10 BSSID 00:00:00:00:00:00 SSID '' due to wpa_bss_flush
  1040. wlp3s0: BSS: Remove id 9 BSSID 00:23:69:f1:0d:b7 SSID 'linksys' due to wpa_bss_flush
  1041. wlp3s0: BSS: Remove id 16 BSSID 00:71:c2:e2:53:ca SSID 'xfinitywifi' due to wpa_bss_flush
  1042. wlp3s0: Cancelling scan request
  1043. wlp3s0: Cancelling authentication timeout
  1044. Remove interface wlp3s0 from radio phy0
  1045. Remove radio phy0
  1046. nl80211: deinit ifname=wlp3s0 disabled_11b_rates=0
  1047. nl80211: Remove monitor interface: refcount=0
  1048. netlink: Operstate: ifindex=4 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP)
  1049. nl80211: Set mode ifindex 4 iftype 2 (STATION)
  1050. nl80211: Unsubscribe mgmt frames handle 0x81067c41 (mode change)
  1051. wlp3s0: CTRL-EVENT-TERMINATING
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top