Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # This is an example resource file for rTorrent. Copy to
- # ~/.rtorrent.rc and enable/modify the options as needed. Remember to
- # uncomment the options you wish to enable.
- # Maximum number of simultaneous downloads and uploads slots (global slots!) (`max_downloads_global`, `max_uploads_global`)
- #
- #throttle.max_downloads.global.set = 300
- #throttle.max_uploads.global.set = 300
- # Global upload and download rate in KiB. "0" for unlimited.
- #
- #throttle.global_down.max_rate.set_kb = 0
- #throttle.global_up.max_rate.set_kb = 0
- # Maximum number of simultaneous downloads and uploads slots per torrent (`max_uploads`) Default: `50` for both
- #
- #throttle.max_downloads.set = 50
- #throttle.max_uploads.set = 8
- # Maximum and minimum number of peers to connect to per torrent.
- #
- #throttle.min_peers.normal.set = 100
- #throttle.max_peers.normal.set = 200
- # Same as above but for seeding completed torrents (-1 = same as downloading)
- #
- #throttle.min_peers.seed.set = 10
- #throttle.max_peers.seed.set = 50
- # Maximum number of connections rtorrent can accept/make (`sockets`)
- #
- #network.max_open_sockets.set = 1200
- # Maximum number of open files rtorrent can keep open (you have to modify the system wide settings with ulimit!) (`set_max_open_files`)
- #
- #network.max_open_files.set = 600
- # Default directory to save the downloaded torrents.
- #
- execute = {/bin/bash,-c,mkdir -p /data/incomplete}
- directory.default.set = /data/incomplete/
- # Default session directory. Make sure you don't run multiple instance
- # of rtorrent using the same session directory. Perhaps using a
- # relative path?
- #
- execute = {/bin/bash,-c,mkdir -p /config/rtorrent/session}
- session.path.set = /config/rtorrent/session/
- # Watch a directory for new torrents, and stop those that have been
- # deleted.
- #
- #schedule2 = watch_directory,5,5,load.start=./watch/*.torrent
- #schedule2 = untied_directory,5,5,stop_untied=
- # Close torrents when diskspace is low.
- #
- #schedule2 = low_diskspace,5,60,close_low_diskspace=100M
- # The ip address reported to the tracker.
- #
- #network.local_address.set = 127.0.0.1
- #network.local_address.set = rakshasa.no
- # The ip address the listening socket and outgoing connections is
- # bound to.
- #
- #network.bind_address.set = 127.0.0.1
- #network.bind_address.set = rakshasa.no
- # Port range to use for listening.
- #
- network.port_range.set = 9012-9012
- # Start opening ports at a random position within the port range.
- #
- network.port_random.set = no
- # Disable check for SSL cert for tracker
- #
- network.http.ssl_verify_peer.set = 0
- # Check hash for finished torrents. Might be useful until the bug is
- # fixed that causes lack of diskspace not to be properly reported.
- #
- #pieces.hash.on_completion.set = no
- # Set whether the client should try to connect to UDP trackers.
- #
- trackers.use_udp.set = yes
- # Set the maximum permitted single file size in a torrent.
- # Note if you do not set this and attempt to start a torrent that
- # contains a file larger than 512 GB (default) then the torrent will
- # not start.
- #
- #system.file.max_size.set = 1024G
- # Alternative calls to bind and ip that should handle dynamic ip's.
- #
- #schedule2 = ip_tick,0,1800,ip=rakshasa
- #schedule2 = bind_tick,0,1800,bind=rakshasa
- # Encryption options, set to none (default) or any combination of the following:
- # allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
- #
- # allow_incoming - Allow incoming encrypted connections from other peers
- # try_outgoing - Attempt to set up encryption when initiating a connection
- # require - Require encryption, and reject to peers who don't support it
- # require_RC4 - Require RC4 encryption specifically
- # enable_retry - If a peer is rejected for not supporting the encryption we need, retry the handshake
- # prefer_plaintext - Prefer plaintext encryption
- #
- protocol.encryption.set = allow_incoming,try_outgoing,enable_retry
- # Enable DHT support for trackerless torrents or when all trackers are down.
- # May be set to "disable" (completely disable DHT), "off" (do not start DHT),
- # "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
- # The default is "off". For DHT to work, a session directory must be defined.
- #
- dht.mode.set = auto
- # UDP port to use for DHT.
- #
- dht.port.set = 9012
- # Enable peer exchange (for torrents not marked private)
- #
- protocol.pex.set = yes
- # Set downlad list layout style. ("full", "compact")
- #
- #ui.torrent_list.layout.set = "full"
- # SCGI Connectivity (for alternative rtorrent interfaces, XMLRPC)
- #
- # Use a IP socket with scgi_port, or a Unix socket with scgi_local.
- # schedule can be used to set permissions on the unix socket.
- #
- scgi_port = 0.0.0.0:5000
- #scgi_local = /home/user/rtorrent/rpc.socket
- #schedule = scgi_permission,0,0,"execute.nothrow=chmod,\"g+w,o=\",/home/user/rtorrent/rpc.socket"
- # Initialise ruTorrent plugins (required for rss and scheduler plugins) on startup
- # (normally triggered by a browser opening the web ui).
- #
- # The command below in practice does NOT always trigger (possible race condition?) and thus
- # the same command has been added to the script /home/nobody/initplugins.sh in order to
- # attempt to ensure all plugins are initialised.
- #
- # NOTE - Do not double quote or curly brackets env var for 'WEBUI_USER'
- #
- execute = {/bin/bash,-c,/usr/bin/sleep 10s && /usr/bin/php /usr/share/webapps/rutorrent/php/initplugins.php $WEBUI_USER &}
Add Comment
Please, Sign In to add comment