SHARE
TWEET

Untitled

a guest Jan 17th, 2020 94 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. Downloading touchpad firmware
  2. (rose_v1.1.8546-ee1861e9e.bin)
  3.  
  4. Flashing touchpad firmware -- do not touch the touchpad while updating!
  5.  
  6. Error flashing touchpad firmware:
  7.  
  8. flashrom v0.9.9  : 980235d1 : Oct 24 2019 22:45:42 UTC on Linux 4.4.196-16940-geab5e6346fdb (x86_64)
  9. flashrom was built with unknown PCI library, LLVM Clang 9.0.0 (/var/cache/chromeos-cache/distfiles/host/egit-src/llvm-project 6b043f051836635a1e88da4d0464e6569bd7b625), big endian
  10. Command line (8 args): /usr/sbin/flashrom -p ec:type=tp -i EC_RW -w -o /tmp/flashrom.log rose_v1.1.8546-ee1861e9e.bin
  11. Acquiring lock (timeout=180 sec)...
  12. Opened file lock "/run/lock/firmware_utility_lock"
  13. Lock acquired.
  14. disable_power_management: Disabling power management.
  15. Calibrating delay loop... OS timer resolution is 1 usecs, 2819M loops per second, 10 myus = 9 us, 100 myus = 98 us, 1000 myus = 1015 us, 10000 myus = 10258 us, 4 myus = 4 us, OK.
  16. Initializing internal programmer
  17. Found candidate at: 00000500-00000528
  18. Found coreboot table at 0x00000500.
  19. Found candidate at: 00000000-00000560
  20. Found coreboot table at 0x00000000.
  21. coreboot table found at 0x7aabe000.
  22. coreboot header(24) checksum: 156a table(1352) checksum: 5373 entries: 45
  23. Vendor ID: Google, part ID: Eve
  24. DMI string system-manufacturer: "Google"
  25. DMI string system-product-name: "Eve"
  26. DMI string system-version: "1.0"
  27. DMI string baseboard-manufacturer: "Google"
  28. DMI string baseboard-product-name: "Eve"
  29. DMI string baseboard-version: "1.0"
  30. DMI string chassis-type: "Desktop"
  31. get_target_bus_from_chipset() returns 0x10.
  32. Found chipset "Intel Skylake" with PCI ID 8086:9d24. Enabling flash write...
  33. BIOS_CNTL = 0x8b: BIOS Lock Enable: enabled, BIOS Write Enable: enabled
  34. SPI BAR is = 0xd123d000
  35. GCS = 0x8b: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x0 (SPI)
  36. SPIBAR = 0x00007bad0d561000 + 0x0000
  37. ich_ generation 16
  38. 0x04: 0x000ee000 (HSFSC)
  39. WARNING: SPI Configuration Lockdown activated.
  40. 0x08: 0x00ffffc0 (FADDR)
  41. 0x50: 0x00004acb (FRAP)
  42. BMWAG 0x00, BMRAG 0x00, BRWA 0x4a, BRRA 0xcb
  43. 0x54: 0x00000000 (FREG0: Flash Descriptor)
  44. 0x00000000-0x00000fff is read-only
  45. 0x58: 0x0fff0200 (FREG1: BIOS)
  46. 0x00200000-0x00ffffff is read-write
  47. 0x5C: 0x01ff0001 (FREG2: Management Engine)
  48. 0x00001000-0x001fffff is locked
  49. 0x60: 0x00007fff (FREG3: Gigabit Ethernet)
  50. Gigabit Ethernet region is unused.
  51. 0x64: 0x00007fff (FREG4: Platform Data)
  52. Platform Data region is unused.
  53. 0x68: 0x00007fff (FREG5: Device Expansion)
  54. Device Expansion region is unused.
  55. 0x6C: 0x00007fff (FREG6: Reserved 1)
  56. Reserved 1 region is unused.
  57. 0x70: 0x00007fff (FREG7: Reserved 2)
  58. Reserved 2 region is unused.
  59. 0x74: 0x00007fff (FREG8: Embedded Controller)
  60. Reading flash descriptors mapped by the chipset via FDOC/FDOD... done.
  61. Embedded Controller region is unused.
  62. 0x84: 0x00000000 (PR0, unused)
  63. 0x88: 0x00000000 (PR1, unused)
  64. 0x8C: 0x00000000 (PR2, unused)
  65. 0x90: 0x00000000 (PR3, unused)
  66. 0x94: 0x00000000 (PR4, unused)
  67. 0x98: 0x00000000 (PR5, unused)
  68. 0x9C: 0x00000000 (PR6, unused)
  69. 0xA0: 0xfe000080 (PR7)
  70. 0x00080000-0x01e00fff is read-only
  71. 0xA4: 0xb32d5006 (PR8)
  72. 0x01006000-0x0132dfff is read-only
  73. Reading flash descriptors mapped by the chipset via FDOC/FDOD... done.
  74. === Content Section ===
  75. FLVALSIG 0x0ff0a55a
  76. FLMAP0   0x00040003
  77. FLMAP1   0x42100208
  78. FLMAP2   0x00310330
  79.  
  80. --- Details ---
  81. NR          (Number of Regions):                     1
  82. FRBA        (Flash Region Base Address):         0x040
  83. NC          (Number of Components):                  1
  84. FCBA        (Flash Component Base Address):      0x030
  85. ISL         (ICH/PCH Strap Length):                 66
  86. FISBA/FPSBA (Flash ICH/PCH Strap Base Address):  0x100
  87. NM          (Number of Masters):                     3
  88. FMBA        (Flash Master Base Address):         0x080
  89. MSL/PSL     (MCH/PROC Strap Length):                 3
  90. FMSBA       (Flash MCH/PROC Strap Base Address): 0x300
  91.  
  92. === Component Section ===
  93. FLCOMP   0x125c00f5
  94. FLILL    0xad604221
  95.  
  96. --- Details ---
  97. Component 1 density:            16 MB
  98. Component 2 is not used.
  99. Read Clock Frequency:           reserved
  100. Read ID and Status Clock Freq.: reserved
  101. Write and Erase Clock Freq.:    reserved
  102. Fast Read is supported.
  103. Fast Read Clock Frequency:      reserved
  104. Invalid instruction 0:          0x21
  105. Invalid instruction 1:          0x42
  106. Invalid instruction 2:          0x60
  107. Invalid instruction 3:          0xad
  108.  
  109. === Region Section ===
  110. FLREG0   0x00000000
  111. FLREG1   0x0fff0200
  112.  
  113. --- Details ---
  114. Region 0 (Descr.) 0x00000000 - 0x00000fff
  115. Region 1 (BIOS  ) 0x00200000 - 0x00ffffff
  116.  
  117. prettyprint_ich_descriptor_master: cs=16
  118. === Master Section ===
  119. FLMSTR1  0x00a00b00
  120. FLMSTR2  0x00c00d00
  121. FLMSTR3  0x00800800
  122. FLMSTR4  0x00000000
  123. FLMSTR5  0x10010100
  124.  
  125. --- Details ---
  126.       Descr. BIOS ME GbE Plat EC
  127. BIOS    r     rw      rw        
  128. ME      r         rw  rw        
  129. GbE                   rw        
  130. Plat                            
  131. EC      r                     rw
  132.  
  133. OK.
  134. Target tp used
  135. cros_ec_probe_dev: probing for CROS_EC at /dev/cros_tp
  136. cros_ec_probe_lpc():518 ...
  137. Target tp used
  138. cros_ec_lpc only supports "ec" type devices.
  139. mec1308 only supports "ec" type devices
  140. mec1308_probe_spi_flash(): entered
  141. mec1308 only supports "ec" type devices
  142. ene_probe_spi_flash
  143. ene_lpc only supports "ec" type devices
  144. Error: Programmer initialization failed.
  145. Restoring PCI config space for 00:1f:5 reg 0xdc
  146. restore_power_management: Re-enabling power management.
  147.  
  148. This function sometimes doesn't work under Linux, in which case it is
  149. recommended to try under ChromiumOS.
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top