API tools faq
paste
Advertisement
Guest User

JetstonTX2UART

a guest
Mar 27th, 2022
47
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 34.06 KB | None | 0 0
raw download clone embed print report
  1. [0000.268] I> Welcome to MB2(TBoot-BPMP)(version: 01.00.160913-t186-M-00.00-mob)
  2. [0000.276] I> Boot-device: eMMC
  3. [0000.284] I> sdmmc bdev is already initialized
  4. [0000.288] I> pmic: reset reason (nverc) : 0x50
  5. [0000.321] I> Found 19 partitions in SDMMC_BOOT (instance 3)
  6. [0000.341] I> Found 33 partitions in SDMMC_USER (instance 3)
  7. [0000.347] W> No valid slot number is found in scratch register
  8. [0000.353] W> Return default slot: _a
  9. [0000.356] I> A/B: bin_type (16) slot 0
  10. [0000.360] I> Loading partition bpmp-fw at 0xd7800000
  11. [0000.365] I> Reading two headers - addr:0xd7800000 blocks:1
  12. [0000.370] I> Addr: 0xd7800000, start-block: 58777608, num_blocks: 1
  13. [0000.395] I> Binary(16) of size 534416 is loaded @ 0xd7800000
  14. [0000.401] W> No valid slot number is found in scratch register
  15. [0000.406] W> Return default slot: _a
  16. [0000.410] I> A/B: bin_type (17) slot 0
  17. [0000.414] I> Loading partition bpmp-fw-dtb at 0xd79f0000
  18. [0000.419] I> Reading two headers - addr:0xd79f0000 blocks:1
  19. [0000.424] I> Addr: 0xd79f0000, start-block: 58780024, num_blocks: 1
  20. [0000.450] I> Binary(17) of size 604528 is loaded @ 0xd796c400
  21. [0000.679] I> Loading SCE-FW ...
  22. [0000.682] W> No valid slot number is found in scratch register
  23. [0000.687] W> Return default slot: _a
  24. [0000.691] I> A/B: bin_type (12) slot 0
  25. [0000.694] I> Loading partition sce-fw at 0xd7300000
  26. [0000.699] I> Reading two headers - addr:0xd7300000 blocks:1
  27. [0000.705] I> Addr: 0xd7300000, start-block: 58784120, num_blocks: 1
  28. [0000.724] I> Binary(12) of size 125632 is loaded @ 0xd7300000
  29. [0000.729] I> Init SCE
  30. [0000.732] I> Loading APE-FW ...
  31. [0000.735] W> No valid slot number is found in scratch register
  32. [0000.741] W> Return default slot: _a
  33. [0000.744] I> A/B: bin_type (11) slot 0
  34. [0000.748] I> Loading partition adsp-fw at 0xd7400000
  35. [0000.752] I> Reading two headers - addr:0xd7400000 blocks:1
  36. [0000.758] I> Addr: 0xd7400000, start-block: 58761224, num_blocks: 1
  37. [0000.777] I> Binary(11) of size 77216 is loaded @ 0xd7400000
  38. [0000.783] I> Copy BTCM section
  39. [0000.786] W> No valid slot number is found in scratch register
  40. [0000.791] W> Return default slot: _a
  41. [0000.795] I> A/B: bin_type (13) slot 0
  42. [0000.798] I> Loading partition cpu-bootloader at 0x96000000
  43. [0000.804] I> Reading two headers - addr:0x96000000 blocks:1
  44. [0000.809] I> Addr: 0x96000000, start-block: 58740744, num_blocks: 1
  45. [0000.831] I> Binary(13) of size 308784 is loaded @ 0x96000000
  46. [0000.836] W> No valid slot number is found in scratch register
  47. [0000.842] W> Return default slot: _a
  48. [0000.846] I> A/B: bin_type (20) slot 0
  49. [0000.849] I> Loading partition bootloader-dtb at 0x85205400
  50. [0000.855] I> Reading two headers - addr:0x85205400 blocks:1
  51. [0000.860] I> Addr: 0x85205400, start-block: 58742792, num_blocks: 1
  52. [0000.883] I> Binary(20) of size 375488 is loaded @ 0x85205400
  53. [0000.888] W> No valid slot number is found in scratch register
  54. [0000.894] W> Return default slot: _a
  55. [0000.897] I> A/B: bin_type (14) slot 0
  56. [0000.901] I> Loading partition secure-os at 0x85305600
  57. [0000.906] I> Reading two headers - addr:0x85305600 blocks:1
  58. [0000.911] I> Addr: 0x85305600, start-block: 58744840, num_blocks: 1
  59. [0000.934] I> Binary(14) of size 402864 is loaded @ 0x85305600
  60. [0000.942] I> TOS boot-params @ 0x85000000
  61. [0000.946] I> TOS params prepared
  62. [0000.949] I> Loading EKS ...
  63. [0000.952] I> A/B: bin_type (15) slot 0
  64. [0000.955] I> Loading partition eks at 0x85905800
  65. [0000.960] I> Reading two headers - addr:0x85905800 blocks:1
  66. [0000.965] I> Addr: 0x85905800, start-block: 58757128, num_blocks: 1
  67. [0000.984] I> Binary(15) of size 1040 is loaded @ 0x85905800
  68. [0000.989] I> EKB detected (length: 0x400) @ 0x85905800
  69. [0000.994] I> Copied encrypted keys
  70. [0000.998] I> boot profiler @ 0x275844000
  71. [0001.002] I> boot profiler for TOS @ 0x275844000
  72. [0001.007] I> Unhalting SCE
  73. [0001.009] I> Primary Memory Start:80000000 Size:70000000
  74. [0001.015] I> Extended Memory Start:f0110000 Size:1856f0000
  75. [0001.022] I> MB2(TBoot-BPMP) done
  76.  
  77. NOTICE: BL31: v1.3(release):b5eeb33f7
  78. NOTICE: BL31: Built : 08:55:30, Feb 19 2022
  79. ipc-unittest-main: 1519: Welcome to IPC unittest!!!
  80. ipc-unittest-main: 1531: waiting forever
  81. ipc-unittest-srv: 329: Init unittest services!!!
  82. hwkey-agent: 41: hwkey-agent is running!!
  83. hwkey-agent: 347: key_mgnt_processing .......
  84. hwkey-agent: 255: Setting EKB key 0 to slot 14
  85. hwkey-agent: 178: Init hweky-agent services!!
  86. luks-srv: 40: luks-srv is running!!
  87. luks-srv: 157: Init luks-srv IPC services!!
  88. platform_bootstrap_epilog: trusty bootstrap complete
  89. [0001.394] I> Welcome to Cboot
  90. [0001.397] I> Cboot Version: t186-704e62f2
  91. [0001.401] I> CPU-BL Params @ 0x275800000
  92. [0001.404] I> 0) Base:0x00000000 Size:0x00000000
  93. [0001.409] I> 1) Base:0x277f00000 Size:0x00100000
  94. [0001.413] I> 2) Base:0x277e00000 Size:0x00100000
  95. [0001.418] I> 3) Base:0x277d00000 Size:0x00100000
  96. [0001.422] I> 4) Base:0x277c00000 Size:0x00100000
  97. [0001.427] I> 5) Base:0x277b00000 Size:0x00100000
  98. [0001.431] I> 6) Base:0x277800000 Size:0x00200000
  99. [0001.436] I> 7) Base:0x277400000 Size:0x00400000
  100. [0001.441] I> 8) Base:0x277a00000 Size:0x00100000
  101. [0001.445] I> 9) Base:0x277300000 Size:0x00100000
  102. [0001.450] I> 10) Base:0x276800000 Size:0x00800000
  103. [0001.454] I> 11) Base:0x30000000 Size:0x00040000
  104. [0001.459] I> 12) Base:0xf0000000 Size:0x00100000
  105. [0001.463] I> 13) Base:0x30040000 Size:0x00001000
  106. [0001.467] I> 14) Base:0x30048000 Size:0x00001000
  107. [0001.472] I> 15) Base:0x30049000 Size:0x00001000
  108. [0001.476] I> 16) Base:0x3004a000 Size:0x00001000
  109. [0001.481] I> 17) Base:0x3004b000 Size:0x00001000
  110. [0001.485] I> 18) Base:0x3004c000 Size:0x00001000
  111. [0001.490] I> 19) Base:0x3004d000 Size:0x00001000
  112. [0001.494] I> 20) Base:0x3004e000 Size:0x00001000
  113. [0001.498] I> 21) Base:0x3004f000 Size:0x00001000
  114. [0001.503] I> 22) Base:0x00000000 Size:0x00000000
  115. [0001.507] I> 23) Base:0xf0100000 Size:0x00010000
  116. [0001.512] I> 24) Base:0x00000000 Size:0x00000000
  117. [0001.516] I> 25) Base:0x00000000 Size:0x00000000
  118. [0001.521] I> 26) Base:0x00000000 Size:0x00000000
  119. [0001.525] I> 27) Base:0x00000000 Size:0x00000000
  120. [0001.529] I> 28) Base:0x84400000 Size:0x00400000
  121. [0001.534] I> 29) Base:0x30000000 Size:0x00010000
  122. [0001.538] I> 30) Base:0x278000000 Size:0x08000000
  123. [0001.543] I> 31) Base:0x00000000 Size:0x00000000
  124. [0001.547] I> 32) Base:0x276000000 Size:0x00600000
  125. [0001.552] I> 33) Base:0x80000000 Size:0x70000000
  126. [0001.556] I> 34) Base:0xf0110000 Size:0x1856f0000
  127. [0001.561] I> 35) Base:0x00000000 Size:0x00000000
  128. [0001.565] I> 36) Base:0x00000000 Size:0x00000000
  129. [0001.570] I> 37) Base:0x2772e0000 Size:0x00020000
  130. [0001.574] I> 38) Base:0x84000000 Size:0x00400000
  131. [0001.578] I> 39) Base:0x96000000 Size:0x02000000
  132. [0001.583] I> 40) Base:0x85000000 Size:0x01200000
  133. [0001.587] I> 41) Base:0x275800000 Size:0x00500000
  134. [0001.592] I> 42) Base:0x00000000 Size:0x00000000
  135. [0001.596] I> 43) Base:0x00000000 Size:0x00000000
  136. [0001.601] GIC-SPI Target CPU: 4
  137. [0001.604] Interrupts Init done
  138. [0001.607] calling constructors
  139. [0001.610] initializing heap
  140. [0001.613] initializing threads
  141. [0001.616] initializing timers
  142. [0001.619] creating bootstrap completion thread
  143. [0001.624] top of bootstrap2()
  144. [0001.627] CPU: ARM Cortex A57
  145. [0001.630] CPU: MIDR: 0x411FD073, MPIDR: 0x80000100
  146. [0001.635] initializing platform
  147. [0001.639] I> Bl_dtb @0x85205400
  148. [0001.642] I> gpio framework initialized
  149. [0001.648] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio' drir
  150. [0001.658] I> tegrabl_gpio_driver_register: register 'nvidia,tegra186-gpio-aon'r
  151. [0001.666] I> GPIO framework and drivers are initialized.
  152. [0001.671] I> Boot-device: eMMC
  153. [0001.678] I> sdmmc bdev is already initialized
  154. [0001.709] I> Found 19 partitions in SDMMC_BOOT (instance 3)
  155. [0001.727] I> Found 33 partitions in SDMMC_USER (instance 3)
  156. [0001.732] W> opt-in fuse is not set, skip fuse_burning
  157. [0001.737] I> Reserved memory at 0xfbe00000 for U-Boot relocation
  158. [0001.743] W> No valid slot number is found in scratch register
  159. [0001.748] W> Return default slot: _a
  160. [0001.758] I> A/B: bin_type (21) slot 0
  161. [0001.761] I> Loading kernel-dtb from partition
  162. [0001.766] I> Loading partition kernel-dtb at 0x80000000 from device(0x1)
  163. [0001.783] I> Kernel_dtb @0x80000000
  164. [0001.786] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xee
  165. [0001.797] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' drivr
  166. [0001.804] I> tegrabl_tca9539_init: i2c bus: 0, slave addr: 0xe8
  167. [0001.813] I> tegrabl_gpio_driver_register: register 'tca9539_gpio_driver' drivr
  168. [0001.823] I> fixed regulator driver initialized
  169. [0001.856] I> register 'maxim' power off handle
  170. [0001.862] I> virtual i2c enabled
  171. [0001.865] I> registered 'maxim,max77620' pmic
  172. [0001.870] I> tegrabl_gpio_driver_register: register 'max77620-gpio' driver
  173. [0001.884] E> failed to read label property for node 324868: 13
  174. [0001.892] E> failed to read reg property for node 324964: 13
  175. [0001.900] E> failed to read reg property for node 325016: 13
  176. [0001.909] E> failed to read label property for node 325100: 13
  177. [0001.917] E> failed to read label property for node 325168: 13
  178. [0001.925] E> failed to read reg property for node 325236: 13
  179. [0001.934] E> failed to read reg property for node 325308: 13
  180. [0001.944] I> Find /i2c@c250000's alias i2c7
  181. [0001.948] I> Reading eeprom i2c=7 address=0x50
  182. [0001.977] I> Device at /i2c@c250000:0x50
  183. [0001.981] I> Reading eeprom i2c=7 address=0x57
  184. [0002.010] I> Device at /i2c@c250000:0x57
  185. [0002.014] I> Find /i2c@c240000's alias i2c1
  186. [0002.018] I> Reading eeprom i2c=1 address=0x51
  187. [0002.023] E> I2C: slave not found in slaves.
  188. [0002.027] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start t.
  189. [0002.035] E> I2C_DEV: Failed to send register address 0x00000000.
  190. [0002.041] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 a.
  191. [0002.050] E> eeprom: Retry to read I2C slave device.
  192. [0002.055] E> I2C: slave not found in slaves.
  193. [0002.059] E> I2C: Could not write 0 bytes to slave: 0x00a2 with repeat start t.
  194. [0002.067] E> I2C_DEV: Failed to send register address 0x00000000.
  195. [0002.073] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa2 a.
  196. [0002.082] E> eeprom: Failed to read I2C slave device
  197. [0002.087] I> Eeprom read failed 0x3526070d
  198. [0002.092] I> Find /i2c@3160000's alias i2c0
  199. [0002.096] I> Reading eeprom i2c=0 address=0x50
  200. [0002.100] E> I2C: slave not found in slaves.
  201. [0002.104] E> I2C: Could not write 0 bytes to slave: 0x00a0 with repeat start t.
  202. [0002.112] E> I2C_DEV: Failed to send register address 0x00000000.
  203. [0002.118] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xa0 a.
  204. [0002.127] E> eeprom: Failed to read I2C slave device
  205. [0002.132] I> Eeprom read failed 0x3526070d
  206. [0002.137] I> Find /i2c@3180000's alias i2c2
  207. [0002.141] I> Reading eeprom i2c=2 address=0x54
  208. [0002.145] I> Enabling gpio chip_id = 2, gpio pin = 9
  209. [0002.176] I> Disabling gpio chip_id = 2, gpio pin = 9
  210. [0002.181] I> Device at /i2c@3180000:0x54
  211. [0002.185] I> Reading eeprom i2c=2 address=0x57
  212. [0002.189] I> Enabling gpio chip_id = 2, gpio pin = 9
  213. [0002.195] E> I2C: slave not found in slaves.
  214. [0002.199] E> I2C: Could not write 0 bytes to slave: 0x00ae with repeat start t.
  215. [0002.206] E> I2C_DEV: Failed to send register address 0x00000000.
  216. [0002.212] E> I2C_DEV: Could not read 256 registers of size 1 from slave 0xae a.
  217. [0002.222] E> eeprom: Failed to read I2C slave device
  218. [0002.227] I> Disabling gpio chip_id = 2, gpio pin = 9
  219. [0002.232] I> Eeprom read failed 0x00000000
  220. [0002.236] I> create_pm_ids: id: 3310-1000-B02-C, len: 15
  221. [0002.241] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:03
  222. [0002.252] I> create_pm_ids: id: 2597-0000-501-C, len: 15
  223. [0002.257] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:03
  224. [0002.268] I> create_pm_ids: id: 3326-1000-100-M, len: 15
  225. [0002.273] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:f3
  226. [0002.308] I> enabling 'vdd-hdmi' regulator
  227. [0002.324] I> regulator 'vdd-hdmi' already enabled
  228. [0002.328] I> hdmi cable connected
  229. [0002.337] I> setting 'vdd-pex-1v00' regulator to 1000000 micro volts
  230. [0002.349] I> setting 'vdd-1v8' regulator to 1800000 micro volts
  231. [0002.355] I> retrieved tmds range from prod_list_hdmi_soc
  232. [0002.363] E> cannot find any other nvdisp nodes
  233. [0002.384] I> edid read success
  234. [0002.399] I> edid read success
  235. [0002.402] I> width = 640, height = 480, frequency = 25174825
  236. [0002.408] I> width = 640, height = 480, frequency = 25174825
  237. [0002.413] I> width = 640, height = 480, frequency = 25174825
  238. [0002.418] I> width = 640, height = 480, frequency = 25174825
  239. [0002.424] I> width = 1920, height = 1080, frequency = 148500000
  240. [0002.430] I> width = 1920, height = 1080, frequency = 174500000
  241. [0002.435] I> width = 1920, height = 1080, frequency = 148500000
  242. [0002.441] I> width = 1920, height = 1080, frequency = 148351648
  243. [0002.447] I> width = 1920, height = 1080, frequency = 148351648
  244. [0002.453] I> width = 1280, height = 720, frequency = 74175824
  245. [0002.458] I> width = 1280, height = 720, frequency = 74175824
  246. [0002.464] I> width = 720, height = 480, frequency = 26973026
  247. [0002.469] I> width = 720, height = 576, frequency = 26973026
  248. [0002.475] I> width = 720, height = 480, frequency = 26973026
  249. [0002.480] I> width = 720, height = 576, frequency = 26973026
  250. [0002.486] I> width = 640, height = 480, frequency = 25174825
  251. [0002.491] I> Best mode Width = 1920, Height = 1080, freq = 148351648
  252. [0002.501] I> hdmi_enable, starting HDMI initialisation
  253. [0002.509] I> hdmi_enable, HDMI initialisation complete
  254. [0002.522] initializing target
  255. [0002.525] calling apps_init()
  256. [0002.528] starting app kernel_boot_app
  257. [0002.550] I> found decompressor handler: lz4-legacy
  258. [0002.555] I> decompressing BMP blob ...
  259. [0002.567] I> Kernel type = Normal
  260. [0002.571] I> ########## Fixed storage boot ##########
  261. [0002.575] I> Loading kernel-bootctrl from partition
  262. [0002.580] I> Loading partition kernel-bootctrl at 0xa8000000 from device(0x1)
  263. [0002.595] W> tegrabl_get_kernel_bootctrl: magic number(0x00000000) is invalid
  264. [0002.602] W> tegrabl_get_kernel_bootctrl: use default dummy boot control data
  265. [0002.609] W> No valid slot number is found in scratch register
  266. [0002.614] W> Return default slot: _a
  267. [0002.618] I> A/B: bin_type (24) slot 0
  268. [0002.633] I> Boot image size read from image header: 990e5
  269. [0002.639] I> Boot image load address: 0x80400000
  270. [0002.643] I> Loading kernel from partition
  271. [0002.647] I> Loading partition kernel at 0x80400000 from device(0x1)
  272. [0003.607] I> Validate kernel ...
  273. [0003.610] I> T18x: Authenticate kernel (bin_type 24), max size 0x4000000
  274. [0003.618] I> Decrypt the buffer ... [0003.621] W> tegrabl_decrypt_block: fuse .
  275. [0003.630] I> done
  276. [0003.631] I> Checking boot.img header magic ... [0003.636] I> [OK]
  277. [0003.638] I> kernel-dtb is already loaded
  278. [0003.641] I> Validate kernel-dtb ...
  279. [0003.645] I> T18x: Authenticate kernel-dtb (bin_type 21), max size 0x100000
  280. [0003.652] I> Decrypt the buffer ... [0003.656] W> tegrabl_decrypt_block: fuse .
  281. [0003.664] I> done
  282. [0003.666] I> Kernel hdr @0x80400000
  283. [0003.670] I> Kernel dtb @0x80000000
  284. [0003.673] I> decompressor handler not found
  285. [0003.677] I> Copying kernel image (626917 bytes) from 0x80400800 to 0x80600000e
  286. [0003.686] I> Move ramdisk (len: 0) from 0x8049a000 to 0x947d0000
  287. [0003.694] I> Updated bpmp info to DTB
  288. [0003.700] I> Ramdisk: Base: 0x947d0000; Size: 0x0
  289. [0003.704] I> Updated initrd info to DTB
  290. [0003.708] W> WARN: Fail to override "console=none" in commandline
  291. [0003.714] I> Active rootfs suffix:
  292. [0003.717] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display paras
  293. [0003.724] E> tegrabl_linuxboot_add_disp_param, du 1 failed to get display paras
  294. [0003.731] I> disabled_core_mask: 0xffffff0c
  295. [0003.735] W> No valid slot number is found in scratch register
  296. [0003.741] W> Return default slot: _a
  297. [0003.745] I> Active slot suffix:
  298. [0003.748] I> add_boot_slot_suffix: slot_suffix =
  299. [0003.752] I> Linux Cmdline: console=ttyS0,115200 androidboot.presilicon=true f
  300. [0003.806] I> Updated bootarg info to DTB
  301. [0003.810] I> eeprom_get_mac_addr: MAC (type: 0): 00:04:4b:a5:9a:67
  302. [0003.816] I> eeprom_get_mac_addr: MAC (type: 1): 00:04:4b:a5:9a:68
  303. [0003.822] I> eeprom_get_mac_addr: MAC (type: 2): 00:04:4b:a5:9a:69
  304. [0003.829] E> Found no plugin manager ids in source DT
  305. [0003.834] W> Add plugin manager ids from board info
  306. [0003.838] W> "plugin-manager" doesn't exist, creating
  307. [0003.843] W> "ids" doesn't exist, creating
  308. [0003.847] W> "connection" doesn't exist, creating
  309. [0003.852] W> "configs" doesn't exist, creating
  310. [0003.856] I> create_pm_ids: id: 3310-1000-B02-C, len: 15
  311. [0003.861] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:03
  312. [0003.872] I> create_pm_ids: id: 2597-0000-501-C, len: 15
  313. [0003.877] I> config: mem-type:00,power-config:00,misc-config:00,modem-config:03
  314. [0003.888] I> create_pm_ids: id: 3326-1000-100-M, len: 15
  315. [0003.893] I> config: mem-type:ff,power-config:ff,misc-config:ff,modem-config:f3
  316. [0003.904] I> Adding plugin-manager/ids/3310-1000-B02=/i2c@c250000:module@0x50
  317. [0003.911] W> "i2c@c250000" doesn't exist, creating
  318. [0003.916] W> "module@0x50" doesn't exist, creating
  319. [0003.921] I> Adding plugin-manager/ids/2597-0000-501=/i2c@c250000:module@0x57
  320. [0003.928] W> "module@0x57" doesn't exist, creating
  321. [0003.933] I> Adding plugin-manager/ids/3326-1000-100=/i2c@3180000:module@0x54
  322. [0003.941] W> "i2c@3180000" doesn't exist, creating
  323. [0003.945] W> "module@0x54" doesn't exist, creating
  324. [0003.952] I> Adding plugin-manager/ids/3310-1000-B02-C
  325. [0003.959] I> Adding plugin-manager/configs/3310-mem-type 00
  326. [0003.965] I> Adding plugin-manager/configs/3310-power-config 00
  327. [0003.971] I> Adding plugin-manager/configs/3310-misc-config 00
  328. [0003.977] I> Adding plugin-manager/configs/3310-modem-config 00
  329. [0003.983] I> Adding plugin-manager/configs/3310-touch-config 00
  330. [0003.989] I> Adding plugin-manager/configs/3310-display-config 00
  331. [0003.995] I> Adding plugin-manager/cvm
  332. [0003.999] W> "chip-id" doesn't exist, creating
  333. [0004.003] I> Adding plugin-manager/chip-id/A02P
  334. [0004.008] W> "odm-data" doesn't exist, creating
  335. [0004.012] I> Adding /chosen/plugin-manager/odm-data
  336. [0004.022] I> added [base:0x80000000, size:0x70000000] to /memory
  337. [0004.028] I> added [base:0xf0200000, size:0x185600000] to /memory
  338. [0004.034] I> added [base:0x275e00000, size:0x200000] to /memory
  339. [0004.039] I> added [base:0x276600000, size:0x200000] to /memory
  340. [0004.045] I> added [base:0x277000000, size:0x200000] to /memory
  341. [0004.051] I> Updated memory info to DTB
  342. [0004.055] E> add_disp_param: failed to get display params for du=1
  343. [0004.063] W> "reset" doesn't exist, creating
  344. [0004.067] W> "pmc-reset-reason" doesn't exist, creating
  345. [0004.073] W> "pmic-reset-reason" doesn't exist, creating
  346. [0004.079] I> Adding ecid(00000001644036470800000003038180) to DT
  347. [0004.085] I> disabled_core_mask: 0xffffff0c
  348. [0004.098] I> Add serial number:0422018037223 as DT property
  349. [0004.107] I> Plugin-manager override starting
  350. [0004.113] I> node /plugin-manager/fragement@0 matches
  351. [0004.123] I> node /plugin-manager/fragement@4 matches
  352. [0004.136] I> node /plugin-manager/fragment-sdwake-p3310-1000-300 matches
  353. [0004.156] I> node /plugin-manager/fragement-pmon-p3310-1000-300 matches
  354. [0004.165] I> node /plugin-manager/fragement-pmon-p3310-1000-800 matches
  355. [0004.174] I> node /plugin-manager/fragment-devslp@0 matches
  356. [0004.186] I> node /plugin-manager/fragment-500-pcie-config matches
  357. [0004.201] I> node /plugin-manager/fragment-500-xusb-config matches
  358. [0004.224] I> node /plugin-manager/fragment-p3310-c00-comm matches
  359. [0004.238] I> node /plugin-manager/fragment-p3310-c00-pmic matches
  360. [0004.248] I> node /plugin-manager/fragment-p3310-c01 matches
  361. [0004.261] I> node /plugin-manager/fragment-p3310-c03 matches
  362. [0004.304] I> node /plugin-manager/fragment-e3326@0 matches
  363. [0004.386] I> node /plugin-manager/fragment-p3310-c00-camera matches
  364. [0004.413] I> Disable plugin-manager status in FDT
  365. [0004.418] I> Plugin-manager override finished successfully
  366. [0004.423] I> tegrabl_load_kernel_and_dtb: Done
  367. [0004.468] I> Kernel EP: 0x80600000, DTB: 0x80000000
  368.  
  369.  
  370. U-Boot 2020.04-g4335beb692 (Feb 19 2022 - 08:55:32 -0800)
  371.  
  372. SoC: tegra186
  373. Model: NVIDIA P2771-0000-500
  374. Board: NVIDIA P2771-0000
  375. DRAM: 7.8 GiB
  376. MMC: sdhci@3400000: 1, sdhci@3460000: 0
  377. Loading Environment from MMC... *** Warning - bad CRC, using default environment
  378.  
  379. In: serial
  380. Out: serial
  381. Err: serial
  382. Net:
  383. Warning: ethernet@2490000 using MAC address from ROM
  384. eth0: ethernet@2490000
  385. Hit any key to stop autoboot: 0
  386. MMC: no card present
  387. switch to partitions #0, OK
  388. mmc0(part 0) is current device
  389. Scanning mmc 0:1...
  390. Found /boot/extlinux/extlinux.conf
  391. Retrieving file: /boot/extlinux/extlinux.conf
  392. 873 bytes read in 26 ms (32.2 KiB/s)
  393. 1: primary kernel
  394. Retrieving file: /boot/initrd
  395. 7238358 bytes read in 191 ms (36.1 MiB/s)
  396. Retrieving file: /boot/Image
  397. 34484232 bytes read in 833 ms (39.5 MiB/s)
  398. append: console=ttyS0,115200 androidboot.presilicon=true firmware_class.path=/e
  399. ## Flattened Device Tree blob at 80000000
  400. Booting using the fdt blob at 0x80000000
  401. ERROR: reserving fdt memory region failed (addr=0 size=0)
  402. ERROR: reserving fdt memory region failed (addr=0 size=0)
  403. Using Device Tree in place at 0000000080000000, end 0000000080060a5f
  404. copying carveout for /host1x@13e00000/display-hub@15200000/display@15200000...
  405. copying carveout for /host1x@13e00000/display-hub@15200000/display@15210000...
  406. copying carveout for /host1x@13e00000/display-hub@15200000/display@15220000...
  407.  
  408. Starting kernel ...
  409.  
  410. [ 0.000000] Booting Linux on physical CPU 0x100
  411. [ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5403-d8000) (2
  412. [ 0.000000] Boot CPU: AArch64 Processor [411fd073]
  413. [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 80,
  414. [ 0.000000] OF: fdt: - 80000000 , 70000000
  415. [ 0.000000] OF: fdt: - f0200000 , 185600000
  416. [ 0.000000] OF: fdt: - 275e00000 , 200000
  417. [ 0.000000] OF: fdt: - 276600000 , 200000
  418. [ 0.000000] OF: fdt: - 277000000 , 200000
  419. [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000003100000 (options '')
  420. [ 0.000000] bootconsole [uart8250] enabled
  421. [ 0.000000] Found tegra_fbmem2: 00800000@96088000
  422. [ 0.000000] Found lut_mem2: 00002008@96085000
  423. [ 1.891807] cgroup: cgroup2: unknown option "nsdelegate"
  424. [ 3.087248] using random self ethernet address
  425. [ 3.094183] using random host ethernet address
  426. [ 3.845244] using random self ethernet address
  427. [ 3.849928] using random host ethernet address
  428. [ 3.977985] CPU1: shutdown
  429. [ 4.055748] CPU2: shutdown
  430. [ 6.728480] Bridge firewalling registered
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!