Advertisement
Guest User

Untitled

a guest
Dec 25th, 2021
78
133 days
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 48.03 KB | None
  1. 20211225_dmesg.txt
  2. [    0.000000] Booting Linux on physical CPU 0x0
  3. [    0.000000] Linux version 5.10.63-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1496 SMP Wed Dec 1 15:58:56 GMT 2021
  4. [    0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
  5. [    0.000000] CPU: div instructions available: patching division code
  6. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  7. [    0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1
  8. [    0.000000] random: fast init done
  9. [    0.000000] Memory policy: Data cache writealloc
  10. [    0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB
  11. [    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  12. [    0.000000] Zone ranges:
  13. [    0.000000]   DMA      [mem 0x0000000000000000-0x000000002fffffff]
  14. [    0.000000]   Normal   empty
  15. [    0.000000]   HighMem  [mem 0x0000000030000000-0x00000000fbffffff]
  16. [    0.000000] Movable zone start for each node
  17. [    0.000000] Early memory node ranges
  18. [    0.000000]   node   0: [mem 0x0000000000000000-0x000000003b3fffff]
  19. [    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
  20. [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
  21. [    0.000000] On node 0 totalpages: 1012736
  22. [    0.000000]   DMA zone: 1728 pages used for memmap
  23. [    0.000000]   DMA zone: 0 pages reserved
  24. [    0.000000]   DMA zone: 196608 pages, LIFO batch:63
  25. [    0.000000]   HighMem zone: 816128 pages, LIFO batch:63
  26. [    0.000000] percpu: Embedded 20 pages/cpu s50828 r8192 d22900 u81920
  27. [    0.000000] pcpu-alloc: s50828 r8192 d22900 u81920 alloc=20*4096
  28. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  29. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1011008
  30. [    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=DC:A6:32:17:9A:93 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=5e3da3da-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait plymouth.ignore-serial-consoles
  31. [    0.000000] Kernel parameter elevator= does not have any effect anymore.
  32.                Please use sysfs to set IO scheduler for individual devices.
  33. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  34. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  35. [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  36. [    0.000000] software IO TLB: mapped [mem 0x0000000014890000-0x0000000018890000] (64MB)
  37. [    0.000000] Memory: 3601132K/4050944K available (10240K kernel code, 1364K rwdata, 3192K rodata, 2048K init, 891K bss, 122132K reserved, 327680K cma-reserved, 3264512K highmem)
  38. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  39. [    0.000000] ftrace: allocating 34315 entries in 68 pages
  40. [    0.000000] ftrace: allocated 68 pages with 2 groups
  41. [    0.000000] rcu: Hierarchical RCU implementation.
  42. [    0.000000]  Rude variant of Tasks RCU enabled.
  43. [    0.000000]  Tracing variant of Tasks RCU enabled.
  44. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  45. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  46. [    0.000000] GIC: Using split EOI/Deactivate mode
  47. [    0.000000] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=1
  48. [    0.000007] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
  49. [    0.000035] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
  50. [    0.000098] bcm2835: system timer (irq = 25)
  51. [    0.000747] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  52. [    0.000769] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  53. [    0.000792] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  54. [    0.000810] Switching to timer-based delay loop, resolution 18ns
  55. [    0.001068] Console: colour dummy device 80x30
  56. [    0.001830] printk: console [tty1] enabled
  57. [    0.001896] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
  58. [    0.001951] pid_max: default: 32768 minimum: 301
  59. [    0.002130] LSM: Security Framework initializing
  60. [    0.002332] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  61. [    0.002377] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  62. [    0.003852] cgroup: Disabling memory control group subsystem
  63. [    0.004102] CPU: Testing write buffer coherency: ok
  64. [    0.004572] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  65. [    0.005795] Setting up static identity map for 0x200000 - 0x20003c
  66. [    0.006012] rcu: Hierarchical SRCU implementation.
  67. [    0.006954] smp: Bringing up secondary CPUs ...
  68. [    0.008179] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  69. [    0.009537] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  70. [    0.010844] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  71. [    0.011003] smp: Brought up 1 node, 4 CPUs
  72. [    0.011050] SMP: Total of 4 processors activated (432.00 BogoMIPS).
  73. [    0.011080] CPU: All CPU(s) started in HYP mode.
  74. [    0.011106] CPU: Virtualization extensions available.
  75. [    0.011971] devtmpfs: initialized
  76. [    0.026333] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
  77. [    0.026579] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  78. [    0.026633] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  79. [    0.034647] pinctrl core: initialized pinctrl subsystem
  80. [    0.035735] NET: Registered protocol family 16
  81. [    0.039664] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  82. [    0.040456] audit: initializing netlink subsys (disabled)
  83. [    0.040729] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1
  84. [    0.041332] thermal_sys: Registered thermal governor 'step_wise'
  85. [    0.042071] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  86. [    0.042127] hw-breakpoint: maximum watchpoint size is 8 bytes.
  87. [    0.042543] Serial: AMBA PL011 UART driver
  88. [    0.075187] bcm2835-mbox fe00b880.mailbox: mailbox enabled
  89. [    0.090893] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-12-01T15:01:54, variant start
  90. [    0.100906] raspberrypi-firmware soc:firmware: Firmware hash is 71bd3109023a0c8575585ba87cbb374d2eeb038f
  91. [    0.141898] Kprobes globally optimized
  92. [    0.147125] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
  93. [    0.151620] vgaarb: loaded
  94. [    0.152092] SCSI subsystem initialized
  95. [    0.152320] usbcore: registered new interface driver usbfs
  96. [    0.152397] usbcore: registered new interface driver hub
  97. [    0.152483] usbcore: registered new device driver usb
  98. [    0.152866] usb_phy_generic phy: supply vcc not found, using dummy regulator
  99. [    0.154802] clocksource: Switched to clocksource arch_sys_counter
  100. [    1.114308] VFS: Disk quotas dquot_6.6.0
  101. [    1.114426] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  102. [    1.114632] FS-Cache: Loaded
  103. [    1.114898] CacheFiles: Loaded
  104. [    1.125727] NET: Registered protocol family 2
  105. [    1.125993] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
  106. [    1.127472] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  107. [    1.127539] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  108. [    1.127623] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  109. [    1.127710] TCP: Hash tables configured (established 8192 bind 8192)
  110. [    1.127889] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  111. [    1.127946] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  112. [    1.128225] NET: Registered protocol family 1
  113. [    1.128986] RPC: Registered named UNIX socket transport module.
  114. [    1.129020] RPC: Registered udp transport module.
  115. [    1.129048] RPC: Registered tcp transport module.
  116. [    1.129077] RPC: Registered tcp NFSv4.1 backchannel transport module.
  117. [    1.129115] PCI: CLS 0 bytes, default 64
  118. [    1.132110] Initialise system trusted keyrings
  119. [    1.132389] workingset: timestamp_bits=14 max_order=20 bucket_order=6
  120. [    1.140769] zbud: loaded
  121. [    1.142979] FS-Cache: Netfs 'nfs' registered for caching
  122. [    1.143779] NFS: Registering the id_resolver key type
  123. [    1.143831] Key type id_resolver registered
  124. [    1.143859] Key type id_legacy registered
  125. [    1.144000] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  126. [    1.144034] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  127. [    1.145142] Key type asymmetric registered
  128. [    1.145174] Asymmetric key parser 'x509' registered
  129. [    1.145379] bounce: pool size: 64 pages
  130. [    1.145436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  131. [    1.145670] io scheduler mq-deadline registered
  132. [    1.145702] io scheduler kyber registered
  133. [    1.150176] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
  134. [    1.150228] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
  135. [    1.150330] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
  136. [    1.150438] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
  137. [    1.206940] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
  138. [    1.207359] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
  139. [    1.207397] pci_bus 0000:00: root bus resource [bus 00-ff]
  140. [    1.207433] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
  141. [    1.207545] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
  142. [    1.207803] pci 0000:00:00.0: PME# supported from D0 D3hot
  143. [    1.211279] PCI: bus0: Fast back to back transfers disabled
  144. [    1.211636] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
  145. [    1.211781] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
  146. [    1.212231] pci 0000:01:00.0: PME# supported from D0 D3cold
  147. [    1.215732] PCI: bus1: Fast back to back transfers disabled
  148. [    1.215846] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
  149. [    1.215888] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
  150. [    1.215992] pci 0000:00:00.0: PCI bridge to [bus 01]
  151. [    1.216031] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
  152. [    1.216453] pcieport 0000:00:00.0: enabling device (0140 -> 0142)
  153. [    1.216684] pcieport 0000:00:00.0: PME: Signaling with IRQ 63
  154. [    1.225511] iproc-rng200 fe104000.rng: hwrng registered
  155. [    1.225833] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  156. [    1.226729] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
  157. [    1.239114] brd: module loaded
  158. [    1.251512] loop: module loaded
  159. [    1.253295] Loading iSCSI transport class v2.0-870.
  160. [    1.256645] libphy: Fixed MDIO Bus: probed
  161. [    1.258358] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
  162. [    1.274872] libphy: bcmgenet MII bus: probed
  163. [    1.355002] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
  164. [    1.356198] usbcore: registered new interface driver r8152
  165. [    1.356284] usbcore: registered new interface driver lan78xx
  166. [    1.356371] usbcore: registered new interface driver smsc95xx
  167. [    1.358042] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142)
  168. [    1.358225] xhci_hcd 0000:01:00.0: xHCI Host Controller
  169. [    1.358275] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  170. [    1.361662] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
  171. [    1.363029] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  172. [    1.363071] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  173. [    1.363107] usb usb1: Product: xHCI Host Controller
  174. [    1.363137] usb usb1: Manufacturer: Linux 5.10.63-v7l+ xhci-hcd
  175. [    1.363168] usb usb1: SerialNumber: 0000:01:00.0
  176. [    1.363907] hub 1-0:1.0: USB hub found
  177. [    1.364021] hub 1-0:1.0: 1 port detected
  178. [    1.364710] xhci_hcd 0000:01:00.0: xHCI Host Controller
  179. [    1.364753] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  180. [    1.364847] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
  181. [    1.365400] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
  182. [    1.365440] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  183. [    1.365476] usb usb2: Product: xHCI Host Controller
  184. [    1.365506] usb usb2: Manufacturer: Linux 5.10.63-v7l+ xhci-hcd
  185. [    1.365536] usb usb2: SerialNumber: 0000:01:00.0
  186. [    1.366277] hub 2-0:1.0: USB hub found
  187. [    1.366365] hub 2-0:1.0: 4 ports detected
  188. [    1.368064] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  189. [    1.368389] dwc_otg: FIQ enabled
  190. [    1.368404] dwc_otg: NAK holdoff enabled
  191. [    1.368419] dwc_otg: FIQ split-transaction FSM enabled
  192. [    1.368437] Module dwc_common_port init
  193. [    1.368890] usbcore: registered new interface driver uas
  194. [    1.369030] usbcore: registered new interface driver usb-storage
  195. [    1.369252] mousedev: PS/2 mouse device common for all mice
  196. [    1.370911] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  197. [    1.374320] sdhci: Secure Digital Host Controller Interface driver
  198. [    1.374354] sdhci: Copyright(c) Pierre Ossman
  199. [    1.375085] sdhci-pltfm: SDHCI platform and OF driver helper
  200. [    1.378547] ledtrig-cpu: registered to indicate activity on CPUs
  201. [    1.378911] hid: raw HID events driver (C) Jiri Kosina
  202. [    1.379115] usbcore: registered new interface driver usbhid
  203. [    1.379146] usbhid: USB HID core driver
  204. [    1.385175] Initializing XFRM netlink socket
  205. [    1.385240] NET: Registered protocol family 17
  206. [    1.385360] Key type dns_resolver registered
  207. [    1.385771] Registering SWP/SWPB emulation handler
  208. [    1.385954] registered taskstats version 1
  209. [    1.385994] Loading compiled-in X.509 certificates
  210. [    1.386885] Key type ._fscrypt registered
  211. [    1.386916] Key type .fscrypt registered
  212. [    1.386944] Key type fscrypt-provisioning registered
  213. [    1.398477] uart-pl011 fe201000.serial: there is not valid maps for state default
  214. [    1.398811] uart-pl011 fe201000.serial: cts_event_workaround enabled
  215. [    1.398913] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2
  216. [    1.409631] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  217. [    1.414186] of_cfs_init
  218. [    1.414475] of_cfs_init: OK
  219. [    1.448556] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
  220. [    1.449209] Waiting for root device PARTUUID=5e3da3da-02...
  221. [    1.564902] mmc0: new ultra high speed DDR50 SDHC card at address 0001
  222. [    1.565809] mmcblk0: mmc0:0001 SD16G 29.2 GiB
  223. [    1.567926]  mmcblk0: p1 p2
  224. [    1.605255] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  225. [    1.605355] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  226. [    1.610781] devtmpfs: mounted
  227. [    1.620660] Freeing unused kernel memory: 2048K
  228. [    1.644869] usb 1-1: new high-speed USB device number 2 using xhci_hcd
  229. [    1.645380] Run /sbin/init as init process
  230. [    1.645409]   with arguments:
  231. [    1.645424]     /sbin/init
  232. [    1.645438]   with environment:
  233. [    1.645452]     HOME=/
  234. [    1.645466]     TERM=linux
  235. [    1.827723] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
  236. [    1.827774] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  237. [    1.827808] usb 1-1: Product: USB2.0 Hub
  238. [    1.830237] hub 1-1:1.0: USB hub found
  239. [    1.830540] hub 1-1:1.0: 4 ports detected
  240. [    2.112486] systemd[1]: System time before build time, advancing clock.
  241. [    2.154857] usb 1-1.4: new high-speed USB device number 3 using xhci_hcd
  242. [    2.229586] NET: Registered protocol family 10
  243. [    2.231008] Segment Routing with IPv6
  244. [    2.286736] usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.60
  245. [    2.286787] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  246. [    2.286825] usb 1-1.4: Product: USB2.0 Hub
  247. [    2.288902] hub 1-1.4:1.0: USB hub found
  248. [    2.289295] hub 1-1.4:1.0: 4 ports detected
  249. [    2.311159] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  250. [    2.312193] systemd[1]: Detected architecture arm.
  251. [    2.368686] systemd[1]: Set hostname to <raspberrypi>.
  252. [    2.604954] usb 1-1.4.3: new high-speed USB device number 4 using xhci_hcd
  253. [    2.736492] usb 1-1.4.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.60
  254. [    2.736544] usb 1-1.4.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  255. [    2.736582] usb 1-1.4.3: Product: USB2.0 Hub
  256. [    2.738797] hub 1-1.4.3:1.0: USB hub found
  257. [    2.739183] hub 1-1.4.3:1.0: 4 ports detected
  258. [    3.054879] usb 1-1.4.3.3: new high-speed USB device number 5 using xhci_hcd
  259. [    3.186157] usb 1-1.4.3.3: New USB device found, idVendor=0451, idProduct=bef3, bcdDevice= 1.00
  260. [    3.186208] usb 1-1.4.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  261. [    3.186246] usb 1-1.4.3.3: Product: XDS110 (03.00.00.15) Embed with CMSIS-DAP
  262. [    3.186280] usb 1-1.4.3.3: Manufacturer: Texas Instruments
  263. [    3.186310] usb 1-1.4.3.3: SerialNumber: L1100FQJ
  264. [    3.201158] hid-generic 0003:0451:BEF3.0001: hiddev96,hidraw0: USB HID v1.11 Device [Texas Instruments XDS110 (03.00.00.15) Embed with CMSIS-DAP] on usb-0000:01:00.0-1.4.3.3/input5
  265. [    3.211288] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
  266. [    3.258834] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
  267. [    3.302374] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
  268. [    3.439466] random: systemd: uninitialized urandom read (16 bytes read)
  269. [    3.457132] random: systemd: uninitialized urandom read (16 bytes read)
  270. [    3.462256] systemd[1]: Listening on Journal Socket (/dev/log).
  271. [    3.463186] random: systemd: uninitialized urandom read (16 bytes read)
  272. [    3.463850] systemd[1]: Listening on udev Control Socket.
  273. [    3.464599] systemd[1]: Listening on initctl Compatibility Named Pipe.
  274. [    3.469373] systemd[1]: Created slice system-systemd\x2dfsck.slice.
  275. [    3.640359] i2c /dev entries driver
  276. [    4.041635] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  277. [    4.795231] Driver for 1-wire Dallas network protocol.
  278. [    4.801361] gpio-4 (onewire@0): enforced open drain please flag it properly in DT/ACPI DSDT/board file
  279. [    4.808754] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
  280. [    4.809355] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
  281. [    4.810036] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
  282. [    4.819809] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
  283. [    4.936018] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
  284. [    4.938492] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
  285. [    4.938516] [vc_sm_connected_init]: start
  286. [    4.939275] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  287. [    4.960077] [vc_sm_connected_init]: installed successfully
  288. [    4.970699] bcm2835_audio bcm2835_audio: card created with 8 channels
  289. [    5.012435] mc: Linux media interface: v0.10
  290. [    5.054286] videodev: Linux video capture interface: v2.00
  291. [    5.121140] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  292. [    5.123382] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  293. [    5.145051] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
  294. [    5.153581] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
  295. [    5.157356] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
  296. [    5.157982] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
  297. [    5.158497] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
  298. [    5.158880] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
  299. [    5.158911] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
  300. [    5.158936] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
  301. [    5.158974] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
  302. [    5.159002] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
  303. [    5.159248] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
  304. [    5.277097] [drm] No displays found. Consider forcing hotplug if HDMI is attached
  305. [    5.277228] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
  306. [    5.277685] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0
  307. [    5.346656] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1
  308. [    5.409760] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
  309. [    5.436200] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
  310. [    5.436290] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
  311. [    5.440007] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
  312. [    5.440052] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
  313. [    5.446995] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
  314. [    5.447040] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
  315. [    5.452084] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
  316. [    5.452128] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
  317. [    5.625017] cdc_acm 1-1.4.3.3:1.0: ttyACM0: USB ACM device
  318. [    5.765393] cdc_acm 1-1.4.3.3:1.3: ttyACM1: USB ACM device
  319. [    5.772680] usbcore: registered new interface driver cdc_acm
  320. [    5.772698] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  321. [    7.623615] systemd[1]: var-log.mount: Succeeded.
  322. [    7.634337] systemd[1]: var-hdd.log.mount: Succeeded.
  323. [    7.664243] systemd[1]: Started Raise network interfaces.
  324. [    8.173564] systemd[1]: log2ram.service: Main process exited, code=exited, status=1/FAILURE
  325. [    8.177753] systemd[1]: log2ram.service: Failed with result 'exit-code'.
  326. [    8.181495] systemd[1]: Failed to start Log2Ram.
  327. [    8.189931] systemd[1]: Starting Journal Service...
  328. [    8.484131] systemd[1]: Started Journal Service.
  329. [    8.553730] systemd-journald[346]: Received request to flush runtime journal from PID 1
  330. [    8.556769] systemd-journald[346]: File /var/log/journal/a8bb8812ad404c95a7821cc1637f13f0/system.journal corrupted or uncleanly shut down, renaming and replacing.
  331. [   11.035271] random: crng init done
  332. [   11.035292] random: 7 urandom warning(s) missed due to ratelimiting
  333. [   11.378472] uart-pl011 fe201000.serial: no DMA platform data
  334. [   11.383406] 8021q: 802.1Q VLAN Support v1.8
  335. [   11.564608] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  336. [   11.673725] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  337. [   11.957856] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
  338. [   11.958491] bcmgenet fd580000.ethernet eth0: Link is Down
  339. [   14.075028] bcmgenet fd580000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
  340. [   14.075055] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  341. [   16.125144] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  342. [   16.156310] usb 2-2: New USB device found, idVendor=1058, idProduct=0a10, bcdDevice=81.36
  343. [   16.156324] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
  344. [   16.156335] usb 2-2: Product: JMS56x Series
  345. [   16.156346] usb 2-2: Manufacturer: JMicron
  346. [   16.156356] usb 2-2: SerialNumber: 1234567890123
  347. [   16.323569] scsi host0: uas
  348. [   16.324665] scsi 0:0:0:0: Direct-Access     Samsung  SSD 860 EVO 1TB  8136 PQ: 0 ANSI: 6
  349. [   16.329846] scsi 0:0:0:1: Direct-Access     Samsung  SSD 870 QVO 1TB  8136 PQ: 0 ANSI: 6
  350. [   16.329939] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
  351. [   16.330234] sd 0:0:0:0: [sda] Write Protect is off
  352. [   16.330243] sd 0:0:0:0: [sda] Mode Sense: 67 00 10 08
  353. [   16.330769] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  354. [   16.331655] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
  355. [   16.332865] sd 0:0:0:1: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
  356. [   16.333148] sd 0:0:0:1: [sdb] Write Protect is off
  357. [   16.333162] sd 0:0:0:1: [sdb] Mode Sense: 67 00 10 08
  358. [   16.333671] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
  359. [   16.334482] sd 0:0:0:1: [sdb] Optimal transfer size 33553920 bytes
  360. [   16.379781]  sda: sda1
  361. [   16.382839]  sdb: sdb1
  362. [   16.385074] sd 0:0:0:0: [sda] Attached SCSI disk
  363. [   16.386170] sd 0:0:0:1: [sdb] Attached SCSI disk
  364. [   16.905123] usb 2-1: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
  365. [   16.946350] usb 2-1: New USB device found, idVendor=1058, idProduct=0a10, bcdDevice=81.36
  366. [   16.946360] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
  367. [   16.946367] usb 2-1: Product: JMS56x Series
  368. [   16.946375] usb 2-1: Manufacturer: JMicron
  369. [   16.946382] usb 2-1: SerialNumber: 1234567890123
  370. [   17.155412] scsi host1: uas
  371. [   17.156440] scsi 1:0:0:0: Direct-Access     Samsung  SSD 860 EVO 1TB  8136 PQ: 0 ANSI: 6
  372. [   17.158639] scsi 1:0:0:1: Direct-Access     Samsung  SSD 870 QVO 1TB  8136 PQ: 0 ANSI: 6
  373. [   17.159024] sd 1:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
  374. [   17.159268] sd 1:0:0:0: [sdc] Write Protect is off
  375. [   17.159277] sd 1:0:0:0: [sdc] Mode Sense: 67 00 10 08
  376. [   17.159843] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
  377. [   17.160546] sd 1:0:0:0: [sdc] Optimal transfer size 33553920 bytes
  378. [   17.161585] sd 1:0:0:1: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
  379. [   17.161827] sd 1:0:0:1: [sdd] Write Protect is off
  380. [   17.161836] sd 1:0:0:1: [sdd] Mode Sense: 67 00 10 08
  381. [   17.162312] sd 1:0:0:1: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
  382. [   17.163076] sd 1:0:0:1: [sdd] Optimal transfer size 33553920 bytes
  383. [   17.209590]  sdc: sdc1
  384. [   17.212509] sd 1:0:0:0: [sdc] Attached SCSI disk
  385. [   17.231154]  sdd: sdd1
  386. [   17.234014] sd 1:0:0:1: [sdd] Attached SCSI disk
  387. [   18.425169] sd 0:0:0:0: Attached scsi generic sg0 type 0
  388. [   18.425412] sd 0:0:0:1: Attached scsi generic sg1 type 0
  389. [   18.425753] sd 1:0:0:0: Attached scsi generic sg2 type 0
  390. [   18.425956] sd 1:0:0:1: Attached scsi generic sg3 type 0
  391. [   18.484473] Bluetooth: Core ver 2.22
  392. [   18.484522] NET: Registered protocol family 31
  393. [   18.484529] Bluetooth: HCI device and connection manager initialized
  394. [   18.484545] Bluetooth: HCI socket layer initialized
  395. [   18.484555] Bluetooth: L2CAP socket layer initialized
  396. [   18.484580] Bluetooth: SCO socket layer initialized
  397. [   18.497527] Bluetooth: HCI UART driver ver 2.3
  398. [   18.497538] Bluetooth: HCI UART protocol H4 registered
  399. [   18.497585] Bluetooth: HCI UART protocol Three-wire (H5) registered
  400. [   18.497731] Bluetooth: HCI UART protocol Broadcom registered
  401. [   18.751197] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  402. [   18.751206] Bluetooth: BNEP filters: protocol multicast
  403. [   18.751222] Bluetooth: BNEP socket layer initialized
  404. [   18.974793] raid6: neonx8   gen()  3509 MB/s
  405. [   19.094497] Bluetooth: RFCOMM TTY layer initialized
  406. [   19.094518] Bluetooth: RFCOMM socket layer initialized
  407. [   19.094537] Bluetooth: RFCOMM ver 1.11
  408. [   19.144784] raid6: neonx8   xor()  2383 MB/s
  409. [   19.314787] raid6: neonx4   gen()  3887 MB/s
  410. [   19.484783] raid6: neonx4   xor()  2530 MB/s
  411. [   19.654782] raid6: neonx2   gen()  3746 MB/s
  412. [   19.824783] raid6: neonx2   xor()  2829 MB/s
  413. [   19.994798] raid6: neonx1   gen()  2873 MB/s
  414. [   20.164786] raid6: neonx1   xor()  2418 MB/s
  415. [   20.334796] raid6: int32x8  gen()   947 MB/s
  416. [   20.504784] raid6: int32x8  xor()   568 MB/s
  417. [   20.674783] raid6: int32x4  gen()   961 MB/s
  418. [   20.844784] raid6: int32x4  xor()   663 MB/s
  419. [   21.014785] raid6: int32x2  gen()  1036 MB/s
  420. [   21.184781] raid6: int32x2  xor()   598 MB/s
  421. [   21.354784] raid6: int32x1  gen()  1043 MB/s
  422. [   21.524781] raid6: int32x1  xor()   492 MB/s
  423. [   21.524788] raid6: using algorithm neonx4 gen() 3887 MB/s
  424. [   21.524794] raid6: .... xor() 2530 MB/s, rmw enabled
  425. [   21.524801] raid6: using neon recovery algorithm
  426. [   21.528023] xor: measuring software checksum speed
  427. [   21.530630]    arm4regs        :  3801 MB/sec
  428. [   21.534051]    8regs           :  2883 MB/sec
  429. [   21.538166]    32regs          :  2812 MB/sec
  430. [   21.539768]    neon            :  6176 MB/sec
  431. [   21.539774] xor: using function: neon (6176 MB/sec)
  432. [   21.541260] async_tx: api initialized (async)
  433. [   21.558534] md/raid:md0: not clean -- starting background reconstruction
  434. [   21.558597] md/raid:md0: device sda1 operational as raid disk 0
  435. [   21.558604] md/raid:md0: device sdb1 operational as raid disk 1
  436. [   21.558611] md/raid:md0: device sdc1 operational as raid disk 2
  437. [   21.558618] md/raid:md0: device sdd1 operational as raid disk 3
  438. [   21.562815] md/raid:md0: raid level 5 active with 4 out of 4 devices, algorithm 2
  439. [   21.572252] md0: detected capacity change from 0 to 3000205049856
  440. [   21.763954] md: resync of RAID array md0
  441. [   22.026088] EXT4-fs (md0): mounting with "discard" option, but the device does not support discard
  442. [   22.026101] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: discard
  443. [   41.832058] md: md0: resync done.
  444. [  260.047540] EXT4-fs (md0): mounting with "discard" option, but the device does not support discard
  445. [  260.047552] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: discard
  446. [  419.734559] EXT4-fs (md0): mounting with "discard" option, but the device does not support discard
  447. [  419.734571] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: discard
  448. [  454.194820] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  449. [  454.198225] Bridge firewalling registered
  450. [  464.448540] br-8e3b5f141b1b: port 1(vethc468e18) entered blocking state
  451. [  464.448574] br-8e3b5f141b1b: port 1(vethc468e18) entered disabled state
  452. [  464.449382] device vethc468e18 entered promiscuous mode
  453. [  464.538451] IPv6: ADDRCONF(NETDEV_CHANGE): veth58e407a: link becomes ready
  454. [  464.538590] IPv6: ADDRCONF(NETDEV_CHANGE): vethc468e18: link becomes ready
  455. [  464.538708] br-8e3b5f141b1b: port 1(vethc468e18) entered blocking state
  456. [  464.538719] br-8e3b5f141b1b: port 1(vethc468e18) entered forwarding state
  457. [  464.538859] IPv6: ADDRCONF(NETDEV_CHANGE): br-8e3b5f141b1b: link becomes ready
  458. [  464.632335] br-c625d482dda8: port 1(veth7766d0d) entered blocking state
  459. [  464.632344] br-c625d482dda8: port 1(veth7766d0d) entered disabled state
  460. [  464.632615] device veth7766d0d entered promiscuous mode
  461. [  464.633137] br-c625d482dda8: port 1(veth7766d0d) entered blocking state
  462. [  464.633146] br-c625d482dda8: port 1(veth7766d0d) entered forwarding state
  463. [  464.633284] br-c625d482dda8: port 1(veth7766d0d) entered disabled state
  464. [  464.700050] IPv6: ADDRCONF(NETDEV_CHANGE): veth7766d0d: link becomes ready
  465. [  464.700133] br-c625d482dda8: port 1(veth7766d0d) entered blocking state
  466. [  464.700141] br-c625d482dda8: port 1(veth7766d0d) entered forwarding state
  467. [  464.700236] IPv6: ADDRCONF(NETDEV_CHANGE): br-c625d482dda8: link becomes ready
  468. [  464.766256] br-c77a73614339: port 1(veth9319104) entered blocking state
  469. [  464.766266] br-c77a73614339: port 1(veth9319104) entered disabled state
  470. [  464.766442] device veth9319104 entered promiscuous mode
  471. [  464.766717] br-c77a73614339: port 1(veth9319104) entered blocking state
  472. [  464.766726] br-c77a73614339: port 1(veth9319104) entered forwarding state
  473. [  464.766865] br-c77a73614339: port 1(veth9319104) entered disabled state
  474. [  464.833143] IPv6: ADDRCONF(NETDEV_CHANGE): veth9319104: link becomes ready
  475. [  464.833227] br-c77a73614339: port 1(veth9319104) entered blocking state
  476. [  464.833234] br-c77a73614339: port 1(veth9319104) entered forwarding state
  477. [  464.833330] IPv6: ADDRCONF(NETDEV_CHANGE): br-c77a73614339: link becomes ready
  478. [  466.954930] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
  479. [  467.945759] br-8e3b5f141b1b: port 1(vethc468e18) entered disabled state
  480. [  468.015726] br-c77a73614339: port 1(veth9319104) entered disabled state
  481. [  468.017288] eth0: renamed from veth58e407a
  482. [  468.067424] br-8e3b5f141b1b: port 1(vethc468e18) entered blocking state
  483. [  468.067434] br-8e3b5f141b1b: port 1(vethc468e18) entered forwarding state
  484. [  468.067939] eth0: renamed from veth7d6e7b6
  485. [  468.225834] br-c625d482dda8: port 1(veth7766d0d) entered disabled state
  486. [  468.227363] br-c77a73614339: port 1(veth9319104) entered blocking state
  487. [  468.227374] br-c77a73614339: port 1(veth9319104) entered forwarding state
  488. [  468.227640] eth0: renamed from veth0d1cb83
  489. [  468.276289] br-c625d482dda8: port 1(veth7766d0d) entered blocking state
  490. [  468.276299] br-c625d482dda8: port 1(veth7766d0d) entered forwarding state
  491. [  472.989923] br-c77a73614339: port 2(veth1c2bb53) entered blocking state
  492. [  472.989938] br-c77a73614339: port 2(veth1c2bb53) entered disabled state
  493. [  472.990237] device veth1c2bb53 entered promiscuous mode
  494. [  472.990643] br-c77a73614339: port 2(veth1c2bb53) entered blocking state
  495. [  472.990658] br-c77a73614339: port 2(veth1c2bb53) entered forwarding state
  496. [  472.991757] br-c77a73614339: port 2(veth1c2bb53) entered disabled state
  497. [  473.126904] IPv6: ADDRCONF(NETDEV_CHANGE): veth8f73cb9: link becomes ready
  498. [  473.127020] IPv6: ADDRCONF(NETDEV_CHANGE): veth1c2bb53: link becomes ready
  499. [  473.127075] br-c77a73614339: port 2(veth1c2bb53) entered blocking state
  500. [  473.127083] br-c77a73614339: port 2(veth1c2bb53) entered forwarding state
  501. [  473.336511] br-c625d482dda8: port 2(veth6e0902e) entered blocking state
  502. [  473.336522] br-c625d482dda8: port 2(veth6e0902e) entered disabled state
  503. [  473.337035] device veth6e0902e entered promiscuous mode
  504. [  473.337490] br-c625d482dda8: port 2(veth6e0902e) entered blocking state
  505. [  473.337502] br-c625d482dda8: port 2(veth6e0902e) entered forwarding state
  506. [  473.483689] IPv6: ADDRCONF(NETDEV_CHANGE): veth6e0902e: link becomes ready
  507. [  474.836115] br-c77a73614339: port 2(veth1c2bb53) entered disabled state
  508. [  474.836558] eth0: renamed from veth8f73cb9
  509. [  474.888131] br-c77a73614339: port 2(veth1c2bb53) entered blocking state
  510. [  474.888144] br-c77a73614339: port 2(veth1c2bb53) entered forwarding state
  511. [  474.996286] br-c625d482dda8: port 2(veth6e0902e) entered disabled state
  512. [  474.997752] eth1: renamed from vethb245af1
  513. [  475.046564] br-c625d482dda8: port 2(veth6e0902e) entered blocking state
  514. [  475.046575] br-c625d482dda8: port 2(veth6e0902e) entered forwarding state
  515. [14819.685837] usb 1-1.4.3.3: USB disconnect, device number 5
  516. [14819.998852] usb 1-1.4.3.3: new high-speed USB device number 6 using xhci_hcd
  517. [14820.129551] usb 1-1.4.3.3: New USB device found, idVendor=0451, idProduct=bef3, bcdDevice= 1.00
  518. [14820.129561] usb 1-1.4.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  519. [14820.129569] usb 1-1.4.3.3: Product: XDS110 (03.00.00.15) Embed with CMSIS-DAP
  520. [14820.129576] usb 1-1.4.3.3: Manufacturer: Texas Instruments
  521. [14820.129583] usb 1-1.4.3.3: SerialNumber: L1100FQJ
  522. [14820.136114] cdc_acm 1-1.4.3.3:1.0: ttyACM0: USB ACM device
  523. [14820.237415] cdc_acm 1-1.4.3.3:1.3: ttyACM1: USB ACM device
  524. [14820.239168] hid-generic 0003:0451:BEF3.0002: hiddev96,hidraw0: USB HID v1.11 Device [Texas Instruments XDS110 (03.00.00.15) Embed with CMSIS-DAP] on usb-0000:01:00.0-1.4.3.3/input5
  525. [35208.921340] usb 1-1.4.3: USB disconnect, device number 4
  526. [35208.921363] usb 1-1.4.3.3: USB disconnect, device number 6
  527. [35209.245316] usb 1-1.4.3: new high-speed USB device number 7 using xhci_hcd
  528. [35209.386604] usb 1-1.4.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.60
  529. [35209.386615] usb 1-1.4.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  530. [35209.386623] usb 1-1.4.3: Product: USB2.0 Hub
  531. [35209.387882] hub 1-1.4.3:1.0: USB hub found
  532. [35209.388153] hub 1-1.4.3:1.0: 4 ports detected
  533. [35209.725330] usb 1-1.4.3.3: new high-speed USB device number 8 using xhci_hcd
  534. [35209.875983] usb 1-1.4.3.3: New USB device found, idVendor=0451, idProduct=bef3, bcdDevice= 1.00
  535. [35209.875993] usb 1-1.4.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  536. [35209.876001] usb 1-1.4.3.3: Product: XDS110 (03.00.00.15) Embed with CMSIS-DAP
  537. [35209.876008] usb 1-1.4.3.3: Manufacturer: Texas Instruments
  538. [35209.876015] usb 1-1.4.3.3: SerialNumber: L1100FQJ
  539. [35209.882782] cdc_acm 1-1.4.3.3:1.0: ttyACM0: USB ACM device
  540. [35209.984094] cdc_acm 1-1.4.3.3:1.3: ttyACM1: USB ACM device
  541. [35209.985942] hid-generic 0003:0451:BEF3.0003: hiddev96,hidraw0: USB HID v1.11 Device [Texas Instruments XDS110 (03.00.00.15) Embed with CMSIS-DAP] on usb-0000:01:00.0-1.4.3.3/input5
  542. [269656.005484] xhci_hcd 0000:01:00.0: ERROR Transfer event for unknown stream ring slot 6 ep 7
  543. [269656.005493] xhci_hcd 0000:01:00.0: @000000041ad09980 00000000 00000000 05000000 06088001
  544. [269686.126092] sd 1:0:0:1: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD
  545. [269686.126103] sd 1:0:0:1: [sdd] tag#0 CDB: opcode=0x2a 2a 00 00 0a 01 e8 00 00 18 00
  546. [269686.126117] sd 1:0:0:0: [sdc] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
  547. [269686.126123] sd 1:0:0:0: [sdc] tag#1 CDB: opcode=0x2a 2a 00 00 0a 01 e8 00 00 18 00
  548. [269686.126264] xhci_hcd 0000:01:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
  549. [269691.256200] sd 1:0:0:0: [sdc] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD IN
  550. [269691.256211] sd 1:0:0:0: [sdc] tag#5 CDB: opcode=0x28 28 00 3a 36 5d 38 00 00 38 00
  551. [269691.256529] sd 1:0:0:1: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN
  552. [269691.256536] sd 1:0:0:1: [sdd] tag#4 CDB: opcode=0x28 28 00 3a 36 5d 38 00 00 38 00
  553. [269721.336846] sd 1:0:0:1: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD
  554. [269721.336857] sd 1:0:0:1: [sdd] tag#2 CDB: opcode=0x35 35 00 00 00 00 00 00 00 00 00
  555. [269721.336871] sd 1:0:0:0: [sdc] tag#3 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD
  556. [269721.336877] sd 1:0:0:0: [sdc] tag#3 CDB: opcode=0x35 35 00 00 00 00 00 00 00 00 00
  557. [269721.376866] scsi host1: uas_eh_device_reset_handler start
  558. [269721.527590] usb 2-1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd
  559. [269721.560678] scsi host1: uas_eh_device_reset_handler success
  560. [269721.708302] scsi host1: uas_eh_device_reset_handler start
  561. [269721.857966] usb 2-1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd
  562. [269721.891772] scsi host1: uas_eh_device_reset_handler success
  563. [269721.928171] xhci_hcd 0000:01:00.0: ERROR Transfer event for unknown stream ring slot 6 ep 7
  564. [269721.928187] xhci_hcd 0000:01:00.0: @000000041ad0a1e0 00000000 00000000 05000000 06088001
  565. [269752.047535] sd 1:0:0:0: [sdc] tag#2 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
  566. [269752.047552] sd 1:0:0:0: [sdc] tag#2 CDB: opcode=0x2a 2a 08 00 00 08 10 00 00 05 00
  567. [269752.047708] xhci_hcd 0000:01:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
  568. [269782.168141] scsi host1: uas_eh_device_reset_handler start
  569. [269782.169100] xhci_hcd 0000:01:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
  570. [269782.169489] sd 1:0:0:0: [sdc] tag#4 uas_zap_pending 0 uas-tag 3 inflight: CMD
  571. [269782.169497] sd 1:0:0:0: [sdc] tag#4 CDB: opcode=0x2a 2a 00 00 0a 01 e8 00 00 18 00
  572. [269782.169505] sd 1:0:0:1: [sdd] tag#5 uas_zap_pending 0 uas-tag 4 inflight: CMD
  573. [269782.169512] sd 1:0:0:1: [sdd] tag#5 CDB: opcode=0x35 35 00 00 00 00 00 00 00 00 00
  574. [269782.169519] sd 1:0:0:1: [sdd] tag#6 uas_zap_pending 0 uas-tag 5 inflight: CMD
  575. [269782.169525] sd 1:0:0:1: [sdd] tag#6 CDB: opcode=0x28 28 00 3a 36 5d 38 00 00 38 00
  576. [269782.169532] sd 1:0:0:1: [sdd] tag#7 uas_zap_pending 0 uas-tag 6 inflight: CMD
  577. [269782.169538] sd 1:0:0:1: [sdd] tag#7 CDB: opcode=0x2a 2a 00 00 0a 01 e8 00 00 18 00
  578. [269782.169575] xhci_hcd 0000:01:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
  579. [269782.318967] usb 2-1: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd
  580. [269782.352759] scsi host1: uas_eh_device_reset_handler success
  581. [269797.999015] usb 2-1: USB disconnect, device number 3
  582. [269797.999909] sd 1:0:0:0: [sdc] tag#4 uas_zap_pending 0 uas-tag 1 inflight: CMD
  583. [269797.999925] sd 1:0:0:0: [sdc] tag#4 CDB: opcode=0x0 00 00 00 00 00 00
  584. [269798.000035] scsi host1: uas_eh_device_reset_handler FAILED to get lock err -19
  585. [269798.000057] sd 1:0:0:1: Device offlined - not ready after error recovery
  586. [269798.000073] sd 1:0:0:0: Device offlined - not ready after error recovery
  587. [269798.000097] sd 1:0:0:1: Device offlined - not ready after error recovery
  588. [269798.000112] sd 1:0:0:1: Device offlined - not ready after error recovery
  589. [269798.000127] sd 1:0:0:0: Device offlined - not ready after error recovery
  590. [269798.002366] sd 1:0:0:0: [sdc] Synchronizing SCSI cache
  591. [269798.018571] blk_update_request: I/O error, dev sdc, sector 655848 op 0x1:(WRITE) flags 0x800 phys_seg 3 prio class 0
  592. [269798.018611] blk_update_request: I/O error, dev sdc, sector 2064 op 0x1:(WRITE) flags 0x20800 phys_seg 1 prio class 0
  593. [269798.018642] blk_update_request: I/O error, dev sdc, sector 2064 op 0x1:(WRITE) flags 0x20800 phys_seg 1 prio class 0
  594. [269798.018656] md: super_written gets error=-5
  595. [269798.018672] md/raid:md0: Disk failure on sdc1, disabling device.
  596.                 md/raid:md0: Operation continuing on 3 devices.
  597. [269798.038574] sd 1:0:0:1: rejecting I/O to offline device
  598. [269798.038608] blk_update_request: I/O error, dev sdd, sector 976641336 op 0x0:(READ) flags 0x0 phys_seg 7 prio class 0
  599. [269798.038632] md/raid:md0: read error not correctable (sector 976639288 on sdd1).
  600. [269798.038654] md/raid:md0: read error not correctable (sector 976639296 on sdd1).
  601. [269798.038672] md/raid:md0: read error not correctable (sector 976639304 on sdd1).
  602. [269798.038690] md/raid:md0: read error not correctable (sector 976639312 on sdd1).
  603. [269798.038708] md/raid:md0: read error not correctable (sector 976639320 on sdd1).
  604. [269798.038725] md/raid:md0: read error not correctable (sector 976639328 on sdd1).
  605. [269798.038742] md/raid:md0: read error not correctable (sector 976639336 on sdd1).
  606. [269798.038772] blk_update_request: I/O error, dev sdd, sector 655848 op 0x1:(WRITE) flags 0x800 phys_seg 3 prio class 0
  607. [269798.038800] blk_update_request: I/O error, dev sdd, sector 2064 op 0x1:(WRITE) flags 0x20800 phys_seg 1 prio class 0
  608. [269798.038810] md: super_written gets error=-5
  609. [269798.078649] blk_update_request: I/O error, dev sdd, sector 2064 op 0x1:(WRITE) flags 0x20800 phys_seg 1 prio class 0
  610. [269798.078660] md: super_written gets error=-5
  611. [269798.083934] blk_update_request: I/O error, dev sdd, sector 2056 op 0x1:(WRITE) flags 0x20800 phys_seg 1 prio class 0
  612. [269798.083943] md: super_written gets error=-5
  613. [269798.128672] blk_update_request: I/O error, dev sdd, sector 2064 op 0x1:(WRITE) flags 0x20800 phys_seg 1 prio class 0
  614. [269798.128682] md: super_written gets error=-5
  615. [269798.130500] blk_update_request: I/O error, dev sdd, sector 2064 op 0x1:(WRITE) flags 0x20800 phys_seg 1 prio class 0
  616. [269798.130507] md: super_written gets error=-5
  617. [269798.130570] md/raid:md0: read error not correctable (sector 976639288 on sdd1).
  618. [269798.130600] md/raid:md0: read error not correctable (sector 976639296 on sdd1).
  619. [269798.130624] md/raid:md0: read error not correctable (sector 976639304 on sdd1).
  620. [269798.132253] md: super_written gets error=-5
  621. [269798.132308] md: super_written gets error=-5
  622. [269798.133981] md: super_written gets error=-5
  623. [269798.135698] md: super_written gets error=-5
  624. [269798.135756] md: super_written gets error=-5
  625. [269798.137524] md: super_written gets error=-5
  626. [269798.139243] md: super_written gets error=-5
  627. [269798.139301] md: super_written gets error=-5
  628. [269798.141190] EXT4-fs warning (device md0): ext4_end_bio:349: I/O error 10 writing to inode 20447266 starting block 146237)
  629. [269798.141204] Buffer I/O error on device md0, logical block 146237
  630. [269798.141230] Buffer I/O error on device md0, logical block 146238
  631. [269798.141245] Buffer I/O error on device md0, logical block 146239
  632. [269798.141833] Aborting journal on device md0-8.
  633. [269798.142016] md: super_written gets error=-5
  634. [269798.143714] md: super_written gets error=-5
  635. [269798.143770] md: super_written gets error=-5
  636. [269798.145409] EXT4-fs warning (device md0): ext4_end_bio:349: I/O error 10 writing to inode 20448767 starting block 1532306)
  637. [269798.145424] Buffer I/O error on device md0, logical block 1532306
  638. [269798.145576] md: super_written gets error=-5
  639. [269798.147892] md: super_written gets error=-5
  640. [269798.149663] md: super_written gets error=-5
  641. [269798.149741] md: super_written gets error=-5
  642. [269798.151382] Buffer I/O error on dev md0, logical block 0, lost sync page write
  643. [269798.151433] EXT4-fs (md0): I/O error while writing superblock
  644. [269798.151450] EXT4-fs error (device md0): ext4_journal_check_start:83: Detected aborted journal
  645. [269798.151643] md: super_written gets error=-5
  646. [269798.153338] md: super_written gets error=-5
  647. [269798.153414] md: super_written gets error=-5
  648. [269798.155053] Buffer I/O error on dev md0, logical block 365985792, lost sync page write
  649. [269798.155094] JBD2: Error -5 detected when updating journal superblock for md0-8.
  650. [269798.155214] EXT4-fs (md0): Remounting filesystem read-only
  651. [269798.468742] md: super_written gets error=-5
  652. [269798.473869] md: super_written gets error=-5
  653. [269798.658559] sd 1:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x07 driverbyte=0x00
  654. [269798.798574] sd 1:0:0:1: [sdd] Synchronizing SCSI cache
  655. [269799.538571] sd 1:0:0:1: [sdd] Synchronize Cache(10) failed: Result: hostbyte=0x07 driverbyte=0x00
  656. [269802.928962] usb 2-1: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
  657. [269802.960185] usb 2-1: New USB device found, idVendor=1058, idProduct=0a10, bcdDevice=81.36
  658. [269802.960196] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
  659. [269802.960204] usb 2-1: Product: JMS56x Series
  660. [269802.960211] usb 2-1: Manufacturer: JMicron
  661. [269802.960218] usb 2-1: SerialNumber: 1234567890123
  662. [269802.967677] scsi host2: uas
  663. [269802.970120] scsi 2:0:0:0: Direct-Access     Samsung  SSD 860 EVO 1TB  8136 PQ: 0 ANSI: 6
  664. [269802.971423] sd 2:0:0:0: Attached scsi generic sg2 type 0
  665. [269802.972738] sd 2:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
  666. [269802.972866] scsi 2:0:0:1: Direct-Access     Samsung  SSD 870 QVO 1TB  8136 PQ: 0 ANSI: 6
  667. [269802.973009] sd 2:0:0:0: [sde] Write Protect is off
  668. [269802.973019] sd 2:0:0:0: [sde] Mode Sense: 67 00 10 08
  669. [269802.973566] sd 2:0:0:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
  670. [269802.974338] sd 2:0:0:0: [sde] Optimal transfer size 33553920 bytes
  671. [269802.974362] sd 2:0:0:1: Attached scsi generic sg3 type 0
  672. [269802.975637] sd 2:0:0:1: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
  673. [269802.975901] sd 2:0:0:1: [sdf] Write Protect is off
  674. [269802.975914] sd 2:0:0:1: [sdf] Mode Sense: 67 00 10 08
  675. [269802.976411] sd 2:0:0:1: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
  676. [269802.977202] sd 2:0:0:1: [sdf] Optimal transfer size 33553920 bytes
  677. [269802.999235] md: super_written gets error=-5
  678. [269803.004286] md: super_written gets error=-5
  679. [269803.024572]  sdf: sdf1
  680. [269803.027483] sd 2:0:0:1: [sdf] Attached SCSI disk
  681. [269803.033632]  sde: sde1
  682. [269803.036558] sd 2:0:0:0: [sde] Attached SCSI disk
Advertisement
RAW Paste Data Copied
Advertisement