Guest User

Untitled

a guest
Apr 17th, 2013
65
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. #!/usr/bin/pulseaudio -nF
  2. #
  3. # This file is part of PulseAudio.
  4. #
  5. # PulseAudio is free software; you can redistribute it and/or modify it
  6. # under the terms of the GNU Lesser General Public License as published by
  7. # the Free Software Foundation; either version 2 of the License, or
  8. # (at your option) any later version.
  9. #
  10. # PulseAudio is distributed in the hope that it will be useful, but
  11. # WITHOUT ANY WARRANTY; without even the implied warranty of
  12. # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  13. # General Public License for more details.
  14. #
  15. # You should have received a copy of the GNU Lesser General Public License
  16. # along with PulseAudio; if not, write to the Free Software Foundation,
  17. # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
  18.  
  19. # This startup script is used only if PulseAudio is started per-user
  20. # (i.e. not in system mode)
  21.  
  22. .nofail
  23.  
  24. ### Load something into the sample cache
  25. #load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
  26. #load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
  27. #load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
  28. #load-sample-lazy pulse-access /usr/share/sounds/generic.wav
  29.  
  30. .fail
  31.  
  32. ### Automatically restore the volume of streams and devices
  33. load-module module-device-restore
  34. load-module module-stream-restore
  35. load-module module-card-restore
  36.  
  37. ### Automatically augment property information from .desktop files
  38. ### stored in /usr/share/application
  39. load-module module-augment-properties
  40.  
  41. ### Load audio drivers statically
  42. ### (it's probably better to not load these drivers manually, but instead
  43. ### use module-udev-detect -- see below -- for doing this automatically)
  44. #load-module module-alsa-sink
  45. #load-module module-alsa-source device=hw:1,0
  46. #load-module module-alsa-source device=hw:0,0
  47. #load-module module-oss device="/dev/dsp" sink_name=output source_name=input
  48. #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
  49. #load-module module-null-sink
  50. #load-module module-pipe-sink
  51.  
  52. ### Automatically load driver modules depending on the hardware available
  53. .ifexists module-udev-detect.so
  54. load-module module-udev-detect
  55. .else
  56. ### Use the static hardware detection module (for systems that lack udev support)
  57. load-module module-detect
  58. .endif
  59.  
  60. ### Automatically connect sink and source if JACK server is present
  61. #.ifexists module-jackdbus-detect.so
  62. #.nofail
  63. #load-module module-jackdbus-detect
  64. #.fail
  65. #.endif
  66.  
  67. ### Automatically load driver modules for Bluetooth hardware
  68. .ifexists module-bluetooth-policy.so
  69. load-module module-bluetooth-policy
  70. .endif
  71.  
  72. .ifexists module-bluetooth-discover.so
  73. load-module module-bluetooth-discover
  74. .endif
  75.  
  76. ### Load several protocols
  77. .ifexists module-esound-protocol-unix.so
  78. load-module module-esound-protocol-unix
  79. .endif
  80. load-module module-native-protocol-unix
  81.  
  82. ### Network access (may be configured with paprefs, so leave this commented
  83. ### here if you plan to use paprefs)
  84. #load-module module-esound-protocol-tcp
  85. #load-module module-native-protocol-tcp
  86. #load-module module-zeroconf-publish
  87.  
  88. ### Load the RTP receiver module (also configured via paprefs, see above)
  89. #load-module module-rtp-recv
  90.  
  91. ### Load the RTP sender module (also configured via paprefs, see above)
  92. #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
  93. #load-module module-rtp-send source=rtp.monitor
  94.  
  95. ### Load additional modules from GConf settings. This can be configured with the paprefs tool.
  96. ### Please keep in mind that the modules configured by paprefs might conflict with manually
  97. ### loaded modules.
  98. .ifexists module-gconf.so
  99. .nofail
  100. load-module module-gconf
  101. .fail
  102. .endif
  103.  
  104. ### Automatically restore the default sink/source when changed by the user
  105. ### during runtime
  106. ### NOTE: This should be loaded as early as possible so that subsequent modules
  107. ### that look up the default sink/source get the right value
  108. load-module module-default-device-restore
  109.  
  110. ### Automatically move streams to the default sink if the sink they are
  111. ### connected to dies, similar for sources
  112. load-module module-rescue-streams
  113.  
  114. ### Make sure we always have a sink around, even if it is a null sink.
  115. load-module module-always-sink
  116.  
  117. ### Honour intended role device property
  118. load-module module-intended-roles
  119.  
  120. ### Automatically suspend sinks/sources that become idle for too long
  121. load-module module-suspend-on-idle
  122.  
  123. ### If autoexit on idle is enabled we want to make sure we only quit
  124. ### when no local session needs us anymore.
  125. .ifexists module-console-kit.so
  126. .nofail
  127. load-module module-console-kit
  128. .fail
  129. .endif
  130. .ifexists module-systemd-login.so
  131. load-module module-systemd-login
  132. .endif
  133.  
  134. ### Enable positioned event sounds
  135. load-module module-position-event-sounds
  136.  
  137. ### Cork music/video streams when a phone stream is active
  138. load-module module-role-cork
  139.  
  140. ### Modules to allow autoloading of filters (such as echo cancellation)
  141. ### on demand. module-filter-heuristics tries to determine what filters
  142. ### make sense, and module-filter-apply does the heavy-lifting of
  143. ### loading modules and rerouting streams.
  144. load-module module-filter-heuristics
  145. load-module module-filter-apply
  146.  
  147. ### Load DBus protocol
  148. .ifexists module-dbus-protocol.so
  149. load-module module-dbus-protocol
  150. .endif
  151.  
  152. # X11 modules should not be started from default.pa so that one daemon
  153. # can be shared by multiple sessions.
  154.  
  155. ### Load X11 bell module
  156. #load-module module-x11-bell sample=bell-windowing-system
  157.  
  158. ### Register ourselves in the X11 session manager
  159. #load-module module-x11-xsmp
  160.  
  161. ### Publish connection data in the X11 root window
  162. #.ifexists module-x11-publish.so
  163. #.nofail
  164. #load-module module-x11-publish
  165. #.fail
  166. #.endif
  167.  
  168. load-module module-switch-on-port-available
  169.  
  170. ### Make some devices default
  171. #set-default-sink output
  172. #set-default-source input
RAW Paste Data

Adblocker detected! Please consider disabling it...

We've detected AdBlock Plus or some other adblocking software preventing Pastebin.com from fully loading.

We don't have any obnoxious sound, or popup ads, we actively block these annoying types of ads!

Please add Pastebin.com to your ad blocker whitelist or disable your adblocking software.

×