RJLAB_MSAN0032 2/14:064

*** [09:36:16,319][DEBUG - Thread-113] ***
[MSAN_ALLOCATE - EXEC TNCM] tncmComand: msanID:RJLAB_MSAN0032 - targetScriptName:BL_GPON_P2_ZTE_C650 - params:{port=14, ProfileDown=RES_150M_DOWN, Svlan=2431, ont_registration_id=PZTE021464, ProfileUp=RES_40M_UP, ont_id=64, slot=2}

*** [09:37:07,039][ERROR - Thread-113] ***
******************** UOW Report ***********************
UOW ID              : UOW 30878
Type                : Native Command Set
Submitter           : administrator
UOW Creation Time   : 2020-03-30 12:36:46.0
Description         : Testing Commands Thru API
*******************************************************
RJLAB_MSAN0032 - FAILURE (Device Error) [ Worker: voipwrktstbfc001 ] - Native Command Set EMP_GPON_P2_ZTE_C650
************** Operation Summary **********************

Task Start Time: 2020/03/30 12:36:46.608 GMT+00:00
*******************************************************
Task: Native Command Set
Device: RJLAB_MSAN0032
Description: Testing Commands Thru API
Command Set: EMP_GPON_P2_ZTE_C650
*******************************************************
(1) Allocating 20MB of task memory (100% of the default task memory)...
(2) >>> Operation Started on Worker Server 'voipwrktstbfc001'... (constants): 2020/03/30 12:36:46.631 GMT+00:00
(3) <<< Operation Finished in 0 seconds (constants): 2020/03/30 12:36:46.631 GMT+00:00
(4) >>> Operation Started on Worker Server 'voipwrktstbfc001'... (checkCommandSet): 2020/03/30 12:36:46.631 GMT+00:00
(5) Warning: Current config is stale - continuing with task.
(6) <<< Operation Finished in 0 seconds (checkCommandSet): 2020/03/30 12:36:46.635 GMT+00:00
(7) >>> Operation Started on Worker Server 'voipwrktstbfc001'... (radCheck1): 2020/03/30 12:36:46.635 GMT+00:00
(8) <<< Operation Finished in 0 seconds (radCheck1): 2020/03/30 12:36:46.644 GMT+00:00
(9) >>> Operation Started on Worker Server 'voipwrktstbfc001'... (radCompareDeviceIntelliden): 2020/03/30 12:36:46.645 GMT+00:00
(10) <<< Operation Finished in 0 seconds (radCompareDeviceIntelliden): 2020/03/30 12:36:46.645 GMT+00:00
(11) >>> Operation Started on Worker Server 'voipwrktstbfc001'... (applyNativeCommandSet): 2020/03/30 12:36:46.645 GMT+00:00
(12) Using default ResourceAccDoc for atomic resource 'RJLAB_MSAN0032'
(13) Using default DeviceScript for atomic resource 'RJLAB_MSAN0032'
(14) Using default FileTransfer for atomic resource 'RJLAB_MSAN0032'
(15) Using default NCGD for atomic resource 'RJLAB_MSAN0032'
(16) Using Authentication resource 'ITNCM_VOIP/C650' for atomic resource 'RJLAB_MSAN0032' (VTM* match: ZTE/MSAN/C650/*)
(17) Using driver: zte_msan_c650_1.x_v20181130.162402 (CST-0dbf083b-b4a1-4ac0-8bbd-e963d9291c8a)
(18) Actual Model: C650
(19) Actual OS   : V1.1.2
(20) Device script used: Resource Access Type: telnet
(21) Normalised Model: C650
(22) Apply mode: Configuration Change
(23) Setting configuration
(24) Prevent reboot: true
(25) Error updating config
(26)  Unable to processCommand: CMD: streamFile.03.sendData
(27) Command sent:
(28) conf t
(29) interface gpon_olt-1/2/14
(30) onu 64 type BRIDGE sn PZTE021464
(31) exit
(32) ITNCM-Sleep=2000
(33) interface gpon_onu-1/2/14:64
(34) tcont 1 profile VOIP_2M_UP
(35) tcont 3 profile RES_40M_UP
(36) gemport 1 tcont 1
(37) gemport 3 tcont 3
(38) encrypt 1 enable downstream
(39) encrypt 3 enable downstream
(40) exit
(41) Using Raw CLI for Configuration.
++++++++++++++++++++++++++++++++++++++++++++++++++
The following is for Intelliden Support Personnel:
Native commands sent to network resource:
conf t
interface gpon_olt-1/2/14
onu 64 type BRIDGE sn PZTE021464
exit
ITNCM-Sleep=2000
interface gpon_onu-1/2/14:64
tcont 1 profile VOIP_2M_UP
tcont 3 profile RES_40M_UP
gemport 1 tcont 1
gemport 3 tcont 3
encrypt 1 enable downstream
encrypt 3 enable downstream
exit
interface vport-1/2/14.64:1
security max-mac-learn 1
service-port 1 user-vlan 2 vlan 2 svlan 2431
qos traffic-policy VOIP_2M_DOWN direction egress
ip access-group 301 in
port-identification operator-profile service-port 1 GPON_TIM_BRASIL
exit
interface vport-1/2/14.64:3
security max-mac-learn 1
service-port 3 user-vlan 150 vlan 150 svlan 2431
qos traffic-policy RES_150M_DOWN direction egress
ip access-group 301 in
port-identification operator-profile service-port 3 GPON_TIM_BRASIL_EMP_HSI
exit
pon-onu-mng gpon_onu-1/2/14:64
service 1 gemport 1 vlan 2
service 3 gemport 3 vlan 150
vlan port eth_0/1 mode trunk
vlan port eth_0/1 vlan 2,150
end
write
++++++++++++++++++++++++++++++++++++++++++++++++++
Native Command Filename=/home/icosftp/int-zte1585571825675.cfg
Error encountered attempting to update device configuration: com.intelliden.icos.util.DeviceException: Unable to processCommand: CMD: streamFile.03.sendData
Command sent:
conf t
interface gpon_olt-1/2/14
onu 64 type BRIDGE sn PZTE021464
exit
ITNCM-Sleep=2000
interface gpon_onu-1/2/14:64
tcont 1 profile VOIP_2M_UP
tcont 3 profile RES_40M_UP
gemport 1 tcont 1
gemport 3 tcont 3
encrypt 1 enable downstream
encrypt 3 enable downstream
exit
interface vport-1/2/14.64:1
security max-mac-learn 1
service-port 1 user-vlan 2 vlan 2 svlan 2431
qos traffic-policy VOIP_2M_DOWN direction egress
ip access-group 301 in
port-identification operator-profile service-port 1 GPON_TIM_BRASIL
exit
interface vport-1/2/14.64:3
security max-mac-learn 1
service-port 3 user-vlan 150 vlan 150 svlan 2431
qos traffic-policy RES_150M_DOWN direction egress
ip access-group 301 in
port-identification operator-profile service-port 3 GPON_TIM_BRASIL_EMP_HSI
exit
pon-onu-mng gpon_onu-1/2/14:64
service 1 gemport 1 vlan 2
service 3 gemport 3 vlan 150
vlan port eth_0/1 mode trunk
vlan port eth_0/1 vlan 2,150
end
write
Message from device:
Error token: %Error
Complete info from device is:
onu 64 type BRIDGE sn PZTE021464
onu 64 type BRIDGE sn PZTE021464
^
%Error 140303: Invalid input detected at '^' marker.
RJLAB_MSAN0032(config-if-gpon_olt-1/2/14)#.

(42) Setting configuration
(43) Prevent reboot: true
(44) Error getting Info
(45)  Unable to connect to device 10.247.10.33:22.
(46) java.lang.IllegalArgumentException: [  Illegal argument received: null prompt.
(47) All resource access types defined in the RAD have been tried. Cannot initialize driver.
(48) Unable to connect to device 10.247.10.33:22.
(49) No rollback defined
(50) Operation failed with failure category [Device Error]
(51) [Caused by: The command failed to run on device RJLAB_MSAN0032 (OperationFailedException)]
(52) [Caused by: Unable to retrieve physical devices  os-version. (CommsDriverException)]
(53) [Caused by: Unable to retrieve physical devices  os-version. (PhysicalDeviceException)]
(54) Task End Time: 2020/03/30 12:37:08.860 GMT+00:00
*******************************************************
******************** Summary **************************
Unit Of Work Completion Status  :Finished
Unit Of Work Completion Result  :FAILURE
*******************************************************