Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.19.0-30-generic (buildd@lgw01-13) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #34~14.04.1-Ubuntu SMP Fri Oct 2 22:09:39 UTC 2015 (Ubuntu 3.19.0-30.34~14.04.1-generic 3.19.8-ckt6)
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-30-generic root=UUID=e81695c0-b287-4f4f-abc0-cd641ffc2a37 ro quiet splash vt.handoff=7
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bc6bcfff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000bc6bd000-0x00000000bcebcfff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000bcebd000-0x00000000bcfbcfff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000bcfbd000-0x00000000bcffefff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000bcfff000-0x00000000bcffffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000bd000000-0x00000000bf9fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013f7fffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.6 present.
- [ 0.000000] DMI: Hewlett-Packard HP ProBook 6560b/1619, BIOS 68SCE Ver. F.60 03/12/2015
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] AGP: No AGP bridge found
- [ 0.000000] e820: last_pfn = 0x13f800 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
- [ 0.000000] 1 base 000000000 mask F80000000 write-back
- [ 0.000000] 2 base 080000000 mask FC0000000 write-back
- [ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable
- [ 0.000000] 4 base 0BD800000 mask FFF800000 uncachable
- [ 0.000000] 5 base 100000000 mask FC0000000 write-back
- [ 0.000000] 6 base 13F800000 mask FFF800000 uncachable
- [ 0.000000] 7 disabled
- [ 0.000000] 8 disabled
- [ 0.000000] 9 disabled
- [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
- [ 0.000000] e820: last_pfn = 0xbd000 max_arch_pfn = 0x400000000
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
- [ 0.000000] reserving inaccessible SNB gfx pages
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
- [ 0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
- [ 0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x13f600000-0x13f7fffff]
- [ 0.000000] [mem 0x13f600000-0x13f7fffff] page 2M
- [ 0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
- [ 0.000000] init_memory_mapping: [mem 0x120000000-0x13f5fffff]
- [ 0.000000] [mem 0x120000000-0x13f5fffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
- [ 0.000000] [mem 0x100000000-0x11fffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbc6bcfff]
- [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
- [ 0.000000] [mem 0x00200000-0xbc5fffff] page 2M
- [ 0.000000] [mem 0xbc600000-0xbc6bcfff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0xbcfff000-0xbcffffff]
- [ 0.000000] [mem 0xbcfff000-0xbcffffff] page 4k
- [ 0.000000] BRK [0x01fd8000, 0x01fd8fff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x35a2a000-0x36d0cfff]
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x00000000000F2F60 000024 (v02 HPQOEM)
- [ 0.000000] ACPI: XSDT 0x00000000BCFFE120 00007C (v01 HPQOEM SLIC-MPC 0000000F 01000013)
- [ 0.000000] ACPI: FACP 0x00000000BCFFC000 0000F4 (v03 HPQOEM 1619 0000000F HP 00000001)
- [ 0.000000] ACPI: DSDT 0x00000000BCFD1000 025C67 (v02 HPQOEM 1619 00000001 INTL 20060912)
- [ 0.000000] ACPI: FACS 0x00000000BCF87000 000040
- [ 0.000000] ACPI: FACS 0x00000000BCF87000 000040
- [ 0.000000] ACPI: HPET 0x00000000BCFFB000 000038 (v01 HPQOEM 1619 00000001 HP 00000001)
- [ 0.000000] ACPI: APIC 0x00000000BCFFA000 0000BC (v01 HPQOEM 1619 00000001 HP 00000001)
- [ 0.000000] ACPI: MCFG 0x00000000BCFF9000 00003C (v01 HPQOEM 1619 00000001 HP 00000001)
- [ 0.000000] ACPI: ASF! 0x00000000BCFF8000 0000A5 (v32 HPQOEM 1619 00000001 HP 00000001)
- [ 0.000000] ACPI: TCPA 0x00000000BCFF7000 000032 (v02 HPQOEM 1619 00000000 HP 00000001)
- [ 0.000000] ACPI: SSDT 0x00000000BCFCE000 000283 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
- [ 0.000000] ACPI: SSDT 0x00000000BCFCD000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
- [ 0.000000] ACPI: SLIC 0x00000000BCFCC000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
- [ 0.000000] ACPI: SSDT 0x00000000BCFCB000 00078C (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
- [ 0.000000] ACPI: SSDT 0x00000000BCFCA000 0009B1 (v01 PmRef CpuPm 00003000 INTL 20060912)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013f7fffff]
- [ 0.000000] NODE_DATA(0) allocated [mem 0x13f7f8000-0x13f7fcfff]
- [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ae00000-ffff88013edfffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal [mem 0x100000000-0x13f7fffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
- [ 0.000000] node 0: [mem 0x00100000-0xbc6bcfff]
- [ 0.000000] node 0: [mem 0xbcfff000-0xbcffffff]
- [ 0.000000] node 0: [mem 0x100000000-0x13f7fffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x13f7fffff]
- [ 0.000000] On node 0 totalpages: 1031771
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 157 pages reserved
- [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 11995 pages used for memmap
- [ 0.000000] DMA32 zone: 767678 pages, LIFO batch:31
- [ 0.000000] Normal zone: 4064 pages used for memmap
- [ 0.000000] Normal zone: 260096 pages, LIFO batch:31
- [ 0.000000] Reserving Intel graphics stolen memory at 0xbda00000-0xbf9fffff
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbc6bd000-0xbcebcfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbcebd000-0xbcfbcfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbcfbd000-0xbcffefff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbd000000-0xbf9fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xdfffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
- [ 0.000000] e820: [mem 0xbfa00000-0xdfffffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88013f400000 s86144 r8192 d32640 u262144
- [ 0.000000] pcpu-alloc: s86144 r8192 d32640 u262144 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1015491
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-30-generic root=UUID=e81695c0-b287-4f4f-abc0-cd641ffc2a37 ro quiet splash vt.handoff=7
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
- [ 0.000000] AGP: Checking aperture...
- [ 0.000000] AGP: No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 3958000K/4127084K available (7920K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 169084K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
- [ 0.000000] NR_IRQS:16640 nr_irqs:488 16
- [ 0.000000] Offload RCU callbacks from all CPUs
- [ 0.000000] Offload RCU callbacks from CPUs: 0-7.
- [ 0.000000] vt handoff: transparent VT on vt#7
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 2294.919 MHz processor
- [ 0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.83 BogoMIPS (lpj=9179676)
- [ 0.000038] pid_max: default: 32768 minimum: 301
- [ 0.000044] ACPI: Core revision 20141107
- [ 0.012690] ACPI: All ACPI Tables successfully acquired
- [ 0.012713] Security Framework initialized
- [ 0.012730] AppArmor: AppArmor initialized
- [ 0.012732] Yama: becoming mindful.
- [ 0.013033] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.014002] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.014450] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.014456] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.014677] Initializing cgroup subsys memory
- [ 0.014685] Initializing cgroup subsys devices
- [ 0.014687] Initializing cgroup subsys freezer
- [ 0.014690] Initializing cgroup subsys net_cls
- [ 0.014692] Initializing cgroup subsys blkio
- [ 0.014694] Initializing cgroup subsys perf_event
- [ 0.014696] Initializing cgroup subsys net_prio
- [ 0.014698] Initializing cgroup subsys hugetlb
- [ 0.014722] CPU: Physical Processor ID: 0
- [ 0.014723] CPU: Processor Core ID: 0
- [ 0.014728] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- [ 0.014728] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.014730] mce: CPU supports 7 MCE banks
- [ 0.014742] CPU0: Thermal monitoring enabled (TM1)
- [ 0.014749] process: using mwait in idle threads
- [ 0.014753] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
- [ 0.014753] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
- [ 0.014878] Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
- [ 0.018366] ftrace: allocating 30022 entries in 118 pages
- [ 0.034376] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.074044] smpboot: CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (fam: 06, model: 2a, stepping: 07)
- [ 0.074053] TSC deadline timer enabled
- [ 0.074078] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
- [ 0.074099] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
- [ 0.074101] ... version: 3
- [ 0.074102] ... bit width: 48
- [ 0.074103] ... generic registers: 4
- [ 0.074104] ... value mask: 0000ffffffffffff
- [ 0.074105] ... max period: 0000ffffffffffff
- [ 0.074106] ... fixed-purpose events: 3
- [ 0.074107] ... event mask: 000000070000000f
- [ 0.075026] x86: Booting SMP configuration:
- [ 0.075028] .... node #0, CPUs: #1
- [ 0.088161] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- [ 0.088274] #2 #3
- [ 0.114476] x86: Booted up 1 node, 4 CPUs
- [ 0.114479] smpboot: Total of 4 processors activated (18359.35 BogoMIPS)
- [ 0.117884] devtmpfs: initialized
- [ 0.120515] evm: security.selinux
- [ 0.120517] evm: security.SMACK64
- [ 0.120518] evm: security.SMACK64EXEC
- [ 0.120519] evm: security.SMACK64TRANSMUTE
- [ 0.120520] evm: security.SMACK64MMAP
- [ 0.120521] evm: security.ima
- [ 0.120521] evm: security.capability
- [ 0.120575] PM: Registering ACPI NVS region [mem 0xbcebd000-0xbcfbcfff] (1048576 bytes)
- [ 0.120737] pinctrl core: initialized pinctrl subsystem
- [ 0.120843] RTC time: 10:01:59, date: 11/09/15
- [ 0.120945] NET: Registered protocol family 16
- [ 0.122487] cpuidle: using governor ladder
- [ 0.126481] cpuidle: using governor menu
- [ 0.126577] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.126578] ACPI: bus type PCI registered
- [ 0.126580] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.126658] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.126660] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.127003] PCI: Using configuration type 1 for base access
- [ 0.127192] mtrr: your CPUs had inconsistent variable MTRR settings
- [ 0.127193] mtrr: probably your BIOS does not setup all CPUs.
- [ 0.127194] mtrr: corrected configuration.
- [ 0.130935] ACPI: Added _OSI(Module Device)
- [ 0.130937] ACPI: Added _OSI(Processor Device)
- [ 0.130939] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.130940] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.134698] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.141517] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.152189] ACPI: Dynamic OEM Table Load:
- [ 0.152198] ACPI: SSDT 0xFFFF880139ECB000 00069C (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
- [ 0.152843] ACPI: Dynamic OEM Table Load:
- [ 0.152849] ACPI: SSDT 0xFFFF880139F82400 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
- [ 0.153419] ACPI: Dynamic OEM Table Load:
- [ 0.153424] ACPI: SSDT 0xFFFF880139880000 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
- [ 0.599860] ACPI: Interpreter enabled
- [ 0.599867] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
- [ 0.599872] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
- [ 0.599886] ACPI: (supports S0 S3 S4 S5)
- [ 0.599887] ACPI: Using IOAPIC for interrupt routing
- [ 0.599910] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.601535] ACPI: Power Resource [APPR] (off)
- [ 0.603292] ACPI: Power Resource [COMP] (on)
- [ 0.603605] ACPI: Power Resource [LPP] (on)
- [ 0.607034] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
- [ 0.607039] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.608447] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
- [ 0.608449] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
- [ 0.609107] PCI host bridge to bus 0000:00
- [ 0.609110] pci_bus 0000:00: root bus resource [bus 00-3e]
- [ 0.609112] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.609114] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.609116] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.609117] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xdfffffff]
- [ 0.609119] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
- [ 0.609121] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
- [ 0.609129] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
- [ 0.609221] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
- [ 0.609232] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit]
- [ 0.609238] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.609243] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
- [ 0.609351] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
- [ 0.609375] pci 0000:00:16.0: reg 0x10: [mem 0xd4724000-0xd472400f 64bit]
- [ 0.609462] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.609545] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
- [ 0.609565] pci 0000:00:19.0: reg 0x10: [mem 0xd4700000-0xd471ffff]
- [ 0.609574] pci 0000:00:19.0: reg 0x14: [mem 0xd472a000-0xd472afff]
- [ 0.609583] pci 0000:00:19.0: reg 0x18: [io 0x4060-0x407f]
- [ 0.609656] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
- [ 0.609692] pci 0000:00:19.0: System wakeup disabled by ACPI
- [ 0.609739] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
- [ 0.609763] pci 0000:00:1a.0: reg 0x10: [mem 0xd4729000-0xd47293ff]
- [ 0.609864] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.609902] pci 0000:00:1a.0: System wakeup disabled by ACPI
- [ 0.609947] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
- [ 0.609965] pci 0000:00:1b.0: reg 0x10: [mem 0xd4720000-0xd4723fff 64bit]
- [ 0.610050] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.610125] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
- [ 0.610222] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.610300] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
- [ 0.610396] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.610436] pci 0000:00:1c.1: System wakeup disabled by ACPI
- [ 0.610476] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
- [ 0.610571] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 0.610615] pci 0000:00:1c.2: System wakeup disabled by ACPI
- [ 0.610656] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
- [ 0.610751] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 0.610791] pci 0000:00:1c.3: System wakeup disabled by ACPI
- [ 0.610843] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
- [ 0.610864] pci 0000:00:1d.0: reg 0x10: [mem 0xd4728000-0xd47283ff]
- [ 0.610965] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.611003] pci 0000:00:1d.0: System wakeup disabled by ACPI
- [ 0.611046] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
- [ 0.611230] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
- [ 0.611250] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
- [ 0.611258] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
- [ 0.611267] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
- [ 0.611275] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
- [ 0.611284] pci 0000:00:1f.2: reg 0x20: [io 0x4040-0x405f]
- [ 0.611292] pci 0000:00:1f.2: reg 0x24: [mem 0xd4727000-0xd47277ff]
- [ 0.611347] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.611483] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.611489] pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff]
- [ 0.611604] pci 0000:00:1c.1: PCI bridge to [bus 02-22]
- [ 0.611609] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
- [ 0.611613] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff]
- [ 0.611744] pci 0000:23:00.0: [197b:2380] type 00 class 0x0c0010
- [ 0.611780] pci 0000:23:00.0: reg 0x10: [mem 0xd4500000-0xd45007ff]
- [ 0.611803] pci 0000:23:00.0: reg 0x14: [mem 0xd4505000-0xd45050ff]
- [ 0.612116] pci 0000:23:00.1: [197b:2392] type 00 class 0x088000
- [ 0.612148] pci 0000:23:00.1: reg 0x10: [mem 0xd4504000-0xd45040ff]
- [ 0.612257] pci 0000:23:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref]
- [ 0.612449] pci 0000:23:00.2: [197b:2391] type 00 class 0x080501
- [ 0.612481] pci 0000:23:00.2: reg 0x10: [mem 0xd4503000-0xd45030ff]
- [ 0.618666] pci 0000:00:1c.2: PCI bridge to [bus 23]
- [ 0.618688] pci 0000:00:1c.2: bridge window [mem 0xd4500000-0xd45fffff]
- [ 0.618819] pci 0000:24:00.0: [14e4:4727] type 00 class 0x028000
- [ 0.618853] pci 0000:24:00.0: reg 0x10: [mem 0xd4400000-0xd4403fff 64bit]
- [ 0.619050] pci 0000:24:00.0: supports D1 D2
- [ 0.619088] pci 0000:24:00.0: System wakeup disabled by ACPI
- [ 0.626667] pci 0000:00:1c.3: PCI bridge to [bus 24]
- [ 0.626689] pci 0000:00:1c.3: bridge window [mem 0xd4400000-0xd44fffff]
- [ 0.627634] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
- [ 0.627683] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
- [ 0.627729] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
- [ 0.627776] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
- [ 0.627820] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
- [ 0.627865] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 0.627911] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
- [ 0.627956] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 0.628295] ACPI: Enabled 5 GPEs in block 00 to 3F
- [ 0.628339] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
- [ 0.628438] vgaarb: setting as boot device: PCI:0000:00:02.0
- [ 0.628440] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.628443] vgaarb: loaded
- [ 0.628444] vgaarb: bridge control possible 0000:00:02.0
- [ 0.628701] SCSI subsystem initialized
- [ 0.628756] libata version 3.00 loaded.
- [ 0.628782] ACPI: bus type USB registered
- [ 0.628802] usbcore: registered new interface driver usbfs
- [ 0.628811] usbcore: registered new interface driver hub
- [ 0.628830] usbcore: registered new device driver usb
- [ 0.628968] PCI: Using ACPI for IRQ routing
- [ 0.635685] PCI: pci_cache_line_size set to 64 bytes
- [ 0.635774] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
- [ 0.635776] e820: reserve RAM buffer [mem 0xbc6bd000-0xbfffffff]
- [ 0.635777] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
- [ 0.635779] e820: reserve RAM buffer [mem 0x13f800000-0x13fffffff]
- [ 0.635891] NetLabel: Initializing
- [ 0.635892] NetLabel: domain hash size = 128
- [ 0.635893] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.635907] NetLabel: unlabeled traffic allowed by default
- [ 0.635977] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.635983] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.638019] Switched to clocksource hpet
- [ 0.643792] AppArmor: AppArmor Filesystem Enabled
- [ 0.643865] pnp: PnP ACPI init
- [ 0.644039] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.644041] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
- [ 0.644043] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.644046] system 00:00: [mem 0x00000000-0x00000fff] could not be reserved
- [ 0.644047] system 00:00: [mem 0xbfa00000-0xbfa00fff] has been reserved
- [ 0.644049] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.644051] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.644053] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 0.644055] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 0.644057] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.644061] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.644186] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
- [ 0.644253] system 00:02: [io 0x0200-0x027f] has been reserved
- [ 0.644256] system 00:02: [io 0x1000-0x100f] has been reserved
- [ 0.644258] system 00:02: [io 0xffff] has been reserved
- [ 0.644259] system 00:02: [io 0xffff] has been reserved
- [ 0.644261] system 00:02: [io 0x0400-0x047f] could not be reserved
- [ 0.644263] system 00:02: [io 0x0500-0x057f] has been reserved
- [ 0.644265] system 00:02: [io 0xef80-0xef9f] has been reserved
- [ 0.644268] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.644299] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.644665] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
- [ 0.644960] pnp 00:05: [dma 0 disabled]
- [ 0.645027] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
- [ 0.645055] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.645083] pnp 00:07: Plug and Play ACPI device, IDs SYN017c SYN0100 SYN0002 PNP0f13 (active)
- [ 0.645454] pnp: PnP ACPI: found 8 devices
- [ 0.651890] pci 0000:23:00.1: can't claim BAR 6 [mem 0xffff8000-0xffffffff pref]: no compatible bridge window
- [ 0.651912] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-22] add_size 200000
- [ 0.651931] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- [ 0.651938] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbfb00000-0xbfcfffff 64bit pref]
- [ 0.651941] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.651947] pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff]
- [ 0.651956] pci 0000:00:1c.1: PCI bridge to [bus 02-22]
- [ 0.651959] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
- [ 0.651965] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff]
- [ 0.651969] pci 0000:00:1c.1: bridge window [mem 0xbfb00000-0xbfcfffff 64bit pref]
- [ 0.651977] pci 0000:23:00.1: BAR 6: assigned [mem 0xd4508000-0xd450ffff pref]
- [ 0.651979] pci 0000:00:1c.2: PCI bridge to [bus 23]
- [ 0.651985] pci 0000:00:1c.2: bridge window [mem 0xd4500000-0xd45fffff]
- [ 0.651993] pci 0000:00:1c.3: PCI bridge to [bus 24]
- [ 0.651999] pci 0000:00:1c.3: bridge window [mem 0xd4400000-0xd44fffff]
- [ 0.652008] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.652010] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.652012] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.652014] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xdfffffff]
- [ 0.652015] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
- [ 0.652017] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
- [ 0.652019] pci_bus 0000:01: resource 1 [mem 0xd4600000-0xd46fffff]
- [ 0.652021] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff]
- [ 0.652023] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd3ffffff]
- [ 0.652024] pci_bus 0000:02: resource 2 [mem 0xbfb00000-0xbfcfffff 64bit pref]
- [ 0.652026] pci_bus 0000:23: resource 1 [mem 0xd4500000-0xd45fffff]
- [ 0.652028] pci_bus 0000:24: resource 1 [mem 0xd4400000-0xd44fffff]
- [ 0.652055] NET: Registered protocol family 2
- [ 0.652236] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
- [ 0.652322] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.652420] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.652440] TCP: reno registered
- [ 0.652448] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.652465] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.652518] NET: Registered protocol family 1
- [ 0.652532] pci 0000:00:02.0: Video device with shadowed ROM
- [ 0.653068] PCI: CLS 64 bytes, default 64
- [ 0.653123] Trying to unpack rootfs image as initramfs...
- [ 0.970053] Freeing initrd memory: 19340K (ffff880035a2a000 - ffff880036d0d000)
- [ 0.970072] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.970074] software IO TLB [mem 0xb86bd000-0xbc6bd000] (64MB) mapped at [ffff8800b86bd000-ffff8800bc6bcfff]
- [ 0.970272] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
- [ 0.970330] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
- [ 0.970337] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
- [ 0.970348] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
- [ 0.970356] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
- [ 0.970411] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.970440] Scanning for low memory corruption every 60 seconds
- [ 0.970822] futex hash table entries: 2048 (order: 5, 131072 bytes)
- [ 0.970859] Initialise system trusted keyring
- [ 0.970884] audit: initializing netlink subsys (disabled)
- [ 0.970899] audit: type=2000 audit(1447063319.968:1): initialized
- [ 0.971253] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.972820] zpool: loaded
- [ 0.972823] zbud: loaded
- [ 0.972990] VFS: Disk quotas dquot_6.5.2
- [ 0.973028] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.973502] fuse init (API version 7.23)
- [ 0.973654] Key type big_key registered
- [ 0.974038] Key type asymmetric registered
- [ 0.974041] Asymmetric key parser 'x509' registered
- [ 0.974077] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.974119] io scheduler noop registered
- [ 0.974122] io scheduler deadline registered (default)
- [ 0.974153] io scheduler cfq registered
- [ 0.975066] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
- [ 0.975071] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
- [ 0.975090] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
- [ 0.975094] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
- [ 0.975112] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
- [ 0.975114] pci 0000:23:00.0: Signaling PME through PCIe PME interrupt
- [ 0.975116] pci 0000:23:00.1: Signaling PME through PCIe PME interrupt
- [ 0.975117] pci 0000:23:00.2: Signaling PME through PCIe PME interrupt
- [ 0.975122] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
- [ 0.975140] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
- [ 0.975142] pci 0000:24:00.0: Signaling PME through PCIe PME interrupt
- [ 0.975146] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
- [ 0.975153] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.975193] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
- [ 0.975225] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
- [ 0.975230] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.975262] vesafb: mode is 1024x768x32, linelength=4096, pages=0
- [ 0.975264] vesafb: scrolling: redraw
- [ 0.975265] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 0.977488] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010800000, using 3072k, total 3072k
- [ 0.977597] Console: switching to colour frame buffer device 128x48
- [ 0.977612] fb0: VESA VGA frame buffer device
- [ 0.977638] intel_idle: MWAIT substates: 0x21120
- [ 0.977639] intel_idle: v0.4 model 0x2A
- [ 0.977640] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 0.984556] ACPI: AC Adapter [AC] (off-line)
- [ 0.984763] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
- [ 0.984767] ACPI: Sleep Button [SLPB]
- [ 0.984807] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
- [ 0.984826] ACPI: Lid Switch [LID]
- [ 0.984864] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- [ 0.984866] ACPI: Power Button [PWRF]
- [ 1.011445] thermal LNXTHERM:00: registered as thermal_zone0
- [ 1.011447] ACPI: Thermal Zone [CPUZ] (39 C)
- [ 1.035356] thermal LNXTHERM:01: registered as thermal_zone1
- [ 1.035359] ACPI: Thermal Zone [GFXZ] (0 C)
- [ 1.050219] thermal LNXTHERM:02: registered as thermal_zone2
- [ 1.050222] ACPI: Thermal Zone [EXTZ] (25 C)
- [ 1.065213] thermal LNXTHERM:03: registered as thermal_zone3
- [ 1.065216] ACPI: Thermal Zone [LOCZ] (25 C)
- [ 1.080147] thermal LNXTHERM:04: registered as thermal_zone4
- [ 1.080149] ACPI: Thermal Zone [BATZ] (25 C)
- [ 1.080422] thermal LNXTHERM:05: registered as thermal_zone5
- [ 1.080424] ACPI: Thermal Zone [PCHZ] (0 C)
- [ 1.080459] GHES: HEST is not enabled!
- [ 1.080570] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 1.101243] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
- [ 1.104188] Linux agpgart interface v0.103
- [ 1.105186] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
- [ 1.142039] ACPI: Battery Slot [BAT0] (battery present)
- [ 1.142107] ACPI: Battery Slot [BAT1] (battery absent)
- [ 1.317815] tpm_tis 00:01: TPM is disabled/deactivated (0x7)
- [ 1.319908] brd: module loaded
- [ 1.320568] loop: module loaded
- [ 1.320798] libphy: Fixed MDIO Bus: probed
- [ 1.320801] tun: Universal TUN/TAP device driver, 1.6
- [ 1.320802] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.320850] PPP generic driver version 2.4.2
- [ 1.320923] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.320931] ehci-pci: EHCI PCI platform driver
- [ 1.321112] ehci-pci 0000:00:1a.0: EHCI Host Controller
- [ 1.321118] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 1.321132] ehci-pci 0000:00:1a.0: debug port 2
- [ 1.325038] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
- [ 1.325055] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4729000
- [ 1.333679] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 1.333729] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.333731] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.333732] usb usb1: Product: EHCI Host Controller
- [ 1.333734] usb usb1: Manufacturer: Linux 3.19.0-30-generic ehci_hcd
- [ 1.333736] usb usb1: SerialNumber: 0000:00:1a.0
- [ 1.333856] hub 1-0:1.0: USB hub found
- [ 1.333862] hub 1-0:1.0: 2 ports detected
- [ 1.334116] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 1.334121] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 1.334133] ehci-pci 0000:00:1d.0: debug port 2
- [ 1.338030] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- [ 1.338035] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4728000
- [ 1.349669] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 1.349707] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.349709] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.349711] usb usb2: Product: EHCI Host Controller
- [ 1.349712] usb usb2: Manufacturer: Linux 3.19.0-30-generic ehci_hcd
- [ 1.349714] usb usb2: SerialNumber: 0000:00:1d.0
- [ 1.349819] hub 2-0:1.0: USB hub found
- [ 1.349825] hub 2-0:1.0: 2 ports detected
- [ 1.349945] ehci-platform: EHCI generic platform driver
- [ 1.349955] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.349959] ohci-pci: OHCI PCI platform driver
- [ 1.349969] ohci-platform: OHCI generic platform driver
- [ 1.349977] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.350031] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 1.351867] i8042: Detected active multiplexing controller, rev 1.1
- [ 1.352578] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.352583] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 1.352610] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 1.352631] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 1.352651] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 1.352830] mousedev: PS/2 mouse device common for all mice
- [ 1.353120] rtc_cmos 00:03: RTC can wake from S4
- [ 1.353281] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 1.353310] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 1.353325] i2c /dev entries driver
- [ 1.353391] device-mapper: uevent: version 1.0.3
- [ 1.353460] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
- [ 1.353477] Intel P-state driver initializing.
- [ 1.353689] Consider also installing thermald for improved thermal control.
- [ 1.353695] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.353904] PCCT header not found.
- [ 1.353905] ACPI PCC probe failed.
- [ 1.353992] TCP: cubic registered
- [ 1.354085] NET: Registered protocol family 10
- [ 1.354263] NET: Registered protocol family 17
- [ 1.354274] Key type dns_resolver registered
- [ 1.354568] Loading compiled-in X.509 certificates
- [ 1.355388] Loaded X.509 cert 'Magrathea: Glacier signing key: 53b87e38b524cd2812672fc8904371ea0fabdce5'
- [ 1.355407] registered taskstats version 1
- [ 1.356993] Key type trusted registered
- [ 1.359680] Key type encrypted registered
- [ 1.359689] AppArmor: AppArmor sha1 policy hashing enabled
- [ 1.377971] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
- [ 1.405678] tpm_tis 00:01: A TPM error (7) occurred attempting to read a pcr value
- [ 1.405681] ima: No TPM chip found, activating TPM-bypass!
- [ 1.405705] evm: HMAC attrs: 0x1
- [ 1.406120] Magic number: 7:726:21
- [ 1.406157] pci 0000:23:00.0: hash matches
- [ 1.406239] rtc_cmos 00:03: setting system clock to 2015-11-09 10:02:00 UTC (1447063320)
- [ 1.406314] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 1.406315] EDD information not available.
- [ 1.406377] PM: Hibernation image not present or could not be loaded.
- [ 1.406656] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
- [ 1.406658] Write protecting the kernel read-only data: 12288k
- [ 1.406843] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
- [ 1.406936] Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
- [ 1.415447] systemd-udevd[117]: starting version 204
- [ 1.434712] pps_core: LinuxPPS API ver. 1 registered
- [ 1.434715] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 1.436001] sdhci: Secure Digital Host Controller Interface driver
- [ 1.436003] sdhci: Copyright(c) Pierre Ossman
- [ 1.436617] PTP clock support registered
- [ 1.438412] sdhci-pci 0000:23:00.1: SDHCI controller found [197b:2392] (rev 30)
- [ 1.438535] sdhci-pci 0000:23:00.1: No vmmc regulator found
- [ 1.438538] sdhci-pci 0000:23:00.1: No vqmmc regulator found
- [ 1.439979] ahci 0000:00:1f.2: version 3.0
- [ 1.440138] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
- [ 1.442133] mmc0: SDHCI controller on PCI [0000:23:00.1] using DMA
- [ 1.442158] sdhci-pci 0000:23:00.2: SDHCI controller found [197b:2391] (rev 30)
- [ 1.442235] sdhci-pci 0000:23:00.2: Refusing to bind to secondary interface.
- [ 1.442781] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
- [ 1.442784] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
- [ 1.453913] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3b impl SATA mode
- [ 1.453920] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
- [ 1.486283] scsi host0: ahci
- [ 1.486467] scsi host1: ahci
- [ 1.486592] scsi host2: ahci
- [ 1.486695] scsi host3: ahci
- [ 1.486803] scsi host4: ahci
- [ 1.486908] scsi host5: ahci
- [ 1.486951] ata1: SATA max UDMA/133 abar m2048@0xd4727000 port 0xd4727100 irq 28
- [ 1.486954] ata2: SATA max UDMA/133 abar m2048@0xd4727000 port 0xd4727180 irq 28
- [ 1.486956] ata3: DUMMY
- [ 1.486958] ata4: SATA max UDMA/133 abar m2048@0xd4727000 port 0xd4727280 irq 28
- [ 1.486960] ata5: SATA max UDMA/133 abar m2048@0xd4727000 port 0xd4727300 irq 28
- [ 1.486963] ata6: SATA max UDMA/133 abar m2048@0xd4727000 port 0xd4727380 irq 28
- [ 1.487223] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
- [ 1.505646] firewire_ohci 0000:23:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
- [ 1.645630] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 1.661585] usb 2-1: new high-speed USB device number 2 using ehci-pci
- [ 1.753130] e1000e 0000:00:19.0 eth0: registered PHC clock
- [ 1.753134] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e4:11:5b:f0:28:8f
- [ 1.753136] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
- [ 1.753169] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
- [ 1.778281] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
- [ 1.778284] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.778586] hub 1-1:1.0: USB hub found
- [ 1.778886] hub 1-1:1.0: 6 ports detected
- [ 1.794273] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
- [ 1.794276] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.794574] hub 2-1:1.0: USB hub found
- [ 1.794860] hub 2-1:1.0: 6 ports detected
- [ 1.805504] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.806045] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ 1.806152] ata1.00: ATA-8: TOSHIBA MK3261GSYN, MH000C, max UDMA/100
- [ 1.806161] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.806614] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ 1.806671] ata1.00: configured for UDMA/100
- [ 1.806863] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3261GS 0C PQ: 0 ANSI: 5
- [ 1.807088] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 1.807110] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.807166] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.807169] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.807201] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.912834] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
- [ 1.913449] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.969437] tsc: Refined TSC clocksource calibration: 2294.787 MHz
- [ 2.005716] firewire_core 0000:23:00.0: created device fw0: GUID ffe473fffffffffe, S400
- [ 2.049427] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
- [ 2.065384] usb 2-1.1: new low-speed USB device number 3 using ehci-pci
- [ 2.125388] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 2.128242] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ 2.128257] ata2.00: ATAPI: hp DVDRAM GT50N, MP00, max UDMA/100
- [ 2.131298] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
- [ 2.131314] ata2.00: configured for UDMA/100
- [ 2.133220] scsi 1:0:0:0: CD-ROM hp DVDRAM GT50N MP00 PQ: 0 ANSI: 5
- [ 2.143149] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003c
- [ 2.143159] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
- [ 2.143165] usb 1-1.1: SerialNumber: 00b098472d8a
- [ 2.144505] sr 1:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 2.144508] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 2.144632] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 2.144712] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 2.163955] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c050
- [ 2.163966] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.163971] usb 2-1.1: Product: USB-PS/2 Optical Mouse
- [ 2.163976] usb 2-1.1: Manufacturer: Logitech
- [ 2.167354] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.172000] usbcore: registered new interface driver usbhid
- [ 2.172002] usbhid: USB HID core driver
- [ 2.173281] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C050.0001/input/input12
- [ 2.173408] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.1/input0
- [ 2.237225] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
- [ 2.284352] psmouse serio4: synaptics: queried max coordinates: x [..5690], y [..4854]
- [ 2.353042] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1c0b1, caps: 0xd00033/0x640000/0xa0400, board id: 1621, fw id: 730177
- [ 2.378342] usb 2-1.4: New USB device found, idVendor=04f2, idProduct=b230
- [ 2.378345] usb 2-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
- [ 2.378346] usb 2-1.4: Product: HP HD Webcam [Fixed]
- [ 2.378348] usb 2-1.4: Manufacturer: Chicony Electronics Co., Ltd.
- [ 2.378349] usb 2-1.4: SerialNumber: SN0001
- [ 2.398013] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
- [ 2.461213] ata4: SATA link down (SStatus 0 SControl 300)
- [ 2.781042] ata5: SATA link down (SStatus 0 SControl 300)
- [ 2.969096] Switched to clocksource tsc
- [ 3.100883] ata6: SATA link down (SStatus 0 SControl 300)
- [ 3.437494] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
- [ 4.137605] random: init urandom read with 113 bits of entropy available
- [ 4.426933] random: nonblocking pool is initialized
- [ 10.906200] Adding 4125692k swap on /dev/sda6. Priority:-1 extents:1 across:4125692k FS
- [ 11.137314] systemd-udevd[327]: starting version 204
- [ 11.230147] lp: driver loaded but no devices found
- [ 11.237776] ppdev: user-space parallel port driver
- [ 11.240198] parport_pc 00:05: reported by Plug and Play ACPI
- [ 11.240250] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
- [ 11.310578] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
- [ 11.334531] [drm] Initialized drm 1.1.0 20060810
- [ 11.337798] lp0: using parport0 (interrupt-driven).
- [ 11.346889] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 11.347339] hp_accel: hardware type HPB65xx found
- [ 11.351522] lis3lv02d: 8 bits 3DC sensor found
- [ 11.357112] audit: type=1400 audit(1447059730.454:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=383 comm="apparmor_parser"
- [ 11.357121] audit: type=1400 audit(1447059730.454:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=383 comm="apparmor_parser"
- [ 11.357127] audit: type=1400 audit(1447059730.454:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=383 comm="apparmor_parser"
- [ 11.357690] audit: type=1400 audit(1447059730.454:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=383 comm="apparmor_parser"
- [ 11.357698] audit: type=1400 audit(1447059730.454:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=383 comm="apparmor_parser"
- [ 11.357990] audit: type=1400 audit(1447059730.454:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=383 comm="apparmor_parser"
- [ 11.376893] [drm] Memory usable by graphics device = 2048M
- [ 11.376899] checking generic (c0000000 300000) vs hw (c0000000 10000000)
- [ 11.376901] fb: switching to inteldrmfb from VESA VGA
- [ 11.376926] Console: switching to colour dummy device 80x25
- [ 11.377096] [drm] Replacing VGA console driver
- [ 11.402267] wmi: Mapper loaded
- [ 11.408776] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 11.408780] [drm] Driver supports precise vblank timestamp query.
- [ 11.409075] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 11.413389] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
- [ 11.413425] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
- [ 11.413452] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
- [ 11.413508] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
- [ 11.416079] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input13
- [ 11.426918] bcma: bus0: Bus registered
- [ 11.438430] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 11.441670] acpi device:0b: registered as cooling_device4
- [ 11.441805] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14
- [ 11.441895] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
- [ 11.442209] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258)
- [ 11.442216] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 11.442221] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
- [ 11.442225] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 11.442227] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
- [ 11.442231] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 11.442233] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
- [ 11.442237] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 11.442239] lpc_ich: Resource conflict(s) found affecting gpio_ich
- [ 11.454956] fbcon: inteldrmfb (fb0) is primary device
- [ 11.454983] Console: switching to colour frame buffer device 170x48
- [ 11.455008] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- [ 11.455011] i915 0000:00:02.0: registered panic notifier
- [ 11.475335] AVX version of gcm_enc/dec engaged.
- [ 11.475338] AES CTR mode by8 optimization enabled
- [ 11.487181] sound hdaudioC0D0: autoconfig: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
- [ 11.487186] sound hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
- [ 11.487189] sound hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
- [ 11.487191] sound hdaudioC0D0: mono: mono_out=0x0
- [ 11.487193] sound hdaudioC0D0: inputs:
- [ 11.487196] sound hdaudioC0D0: Mic=0xc
- [ 11.487199] sound hdaudioC0D0: Internal Mic=0x11
- [ 11.487201] sound hdaudioC0D0: Line=0xf
- [ 11.521504] intel_rapl: Found RAPL domain package
- [ 11.521508] intel_rapl: Found RAPL domain core
- [ 11.521510] intel_rapl: Found RAPL domain uncore
- [ 11.559617] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
- [ 11.559775] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
- [ 11.560447] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
- [ 11.560617] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
- [ 11.560847] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
- [ 11.561025] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
- [ 11.561146] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
- [ 11.603318] input: HP WMI hotkeys as /devices/virtual/input/input22
- [ 11.631779] cfg80211: Calling CRDA to update world regulatory domain
- [ 11.671164] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
- [ 11.671172] b43: probe of bcma0:1 failed with error -524
- [ 11.671200] Broadcom 43xx driver loaded [ Features: PNL ]
- [ 11.684821] brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 19
- [ 11.693160] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 11.693508] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 499
- [ 11.693532] cfg80211: Calling CRDA to update world regulatory domain
- [ 11.836295] cfg80211: World regulatory domain updated:
- [ 11.836299] cfg80211: DFS Master region: unset
- [ 11.836300] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 11.836303] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 11.836304] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 11.836306] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 11.836307] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 11.836309] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
- [ 11.836339] cfg80211: Calling CRDA for country: US
- [ 11.870413] cfg80211: Regulatory domain changed to country: US
- [ 11.870416] cfg80211: DFS Master region: unset
- [ 11.870418] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- [ 11.870420] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A)
- [ 11.870422] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A)
- [ 11.870424] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
- [ 11.870425] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
- [ 11.870427] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
- [ 11.870428] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A)
- [ 11.870430] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
- [ 12.165268] init: failsafe main process (642) killed by TERM signal
- [ 12.444135] Bluetooth: Core ver 2.20
- [ 12.444152] NET: Registered protocol family 31
- [ 12.444154] Bluetooth: HCI device and connection manager initialized
- [ 12.444159] Bluetooth: HCI socket layer initialized
- [ 12.444164] Bluetooth: L2CAP socket layer initialized
- [ 12.444171] Bluetooth: SCO socket layer initialized
- [ 12.448172] Bluetooth: RFCOMM TTY layer initialized
- [ 12.448180] Bluetooth: RFCOMM socket layer initialized
- [ 12.448186] Bluetooth: RFCOMM ver 1.11
- [ 12.494337] audit: type=1400 audit(1447059731.590:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=764 comm="apparmor_parser"
- [ 12.494345] audit: type=1400 audit(1447059731.590:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=764 comm="apparmor_parser"
- [ 12.494713] audit: type=1400 audit(1447059731.590:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=764 comm="apparmor_parser"
- [ 12.721206] init: cups main process (765) killed by HUP signal
- [ 12.721220] init: cups main process ended, respawning
- [ 12.729884] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 12.729888] Bluetooth: BNEP filters: protocol multicast
- [ 12.729892] Bluetooth: BNEP socket layer initialized
- [ 13.366755] media: Linux media interface: v0.10
- [ 13.371153] Linux video capture interface: v2.00
- [ 13.440586] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b230)
- [ 13.570341] audit: type=1400 audit(1447059732.666:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=877 comm="apparmor_parser"
- [ 13.645871] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input23
- [ 13.645955] usbcore: registered new interface driver uvcvideo
- [ 13.645958] USB Video Class driver (1.1.1)
- [ 13.779548] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 13.938215] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
- [ 13.938226] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
- [ 13.938379] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 14.696300] wlan0: authenticate with 84:18:3a:6b:13:18
- [ 14.697753] Non-volatile memory driver v1.3
- [ 14.698114] wlan0: direct probe to 84:18:3a:6b:13:18 (try 1/3)
- [ 14.898771] wlan0: direct probe to 84:18:3a:6b:13:18 (try 2/3)
- [ 15.102723] wlan0: direct probe to 84:18:3a:6b:13:18 (try 3/3)
- [ 15.306595] wlan0: authentication with 84:18:3a:6b:13:18 timed out
- [ 16.545407] init: plymouth-upstart-bridge main process ended, respawning
- [ 16.568088] init: plymouth-upstart-bridge main process ended, respawning
- [ 42.653683] audit_printk_skb: 150 callbacks suppressed
- [ 42.653686] audit: type=1400 audit(1447059761.766:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2293 comm="apparmor_parser"
- [ 42.653694] audit: type=1400 audit(1447059761.766:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2293 comm="apparmor_parser"
- [ 42.654062] audit: type=1400 audit(1447059761.766:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2293 comm="apparmor_parser"
- [ 42.994290] wlan0: authenticate with 6a:c0:02:6e:a6:12
- [ 42.996102] wlan0: send auth to 6a:c0:02:6e:a6:12 (try 1/3)
- [ 42.997665] wlan0: authenticated
- [ 43.000317] wlan0: associate with 6a:c0:02:6e:a6:12 (try 1/3)
- [ 43.003218] wlan0: RX AssocResp from 6a:c0:02:6e:a6:12 (capab=0x401 status=0 aid=15)
- [ 43.003898] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
- [ 43.003903] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
- [ 43.003913] wlan0: associated
- [ 43.003947] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 43.148310] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
- [ 79.321684] usb 2-1.3: new high-speed USB device number 5 using ehci-pci
- [ 79.414627] usb 2-1.3: New USB device found, idVendor=04e8, idProduct=6860
- [ 79.414632] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 79.414635] usb 2-1.3: Product: SAMSUNG_Android
- [ 79.414637] usb 2-1.3: Manufacturer: SAMSUNG
- [ 79.414639] usb 2-1.3: SerialNumber: 81031a04
- [ 79.949817] cdc_acm 2-1.3:1.1: ttyACM0: USB ACM device
- [ 79.950121] usbcore: registered new interface driver cdc_acm
- [ 79.950124] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 80.185897] systemd-hostnamed[2835]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement