Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ### #
- ### #
- ### Stabilization Tools Pack 2.1 by Dogway (16-09-2015) #
- ### mod 2.4 by A.SONY in (18-02-2018) #
- ### #
- ##########################################################
- ###
- ### FilmGateFix()
- ###
- ### (http://forum.videohelp.com/threads/371336)
- ###
- ### Function to fix frames ( by means of FreezeFrame() ) with film gate issues after a scene change.
- ### This is aimed at animation, for live footage frame interpolation should be desired.
- ###
- ### Rationale:
- ### Film Gate is about non-linear vertical stretching, thus we compare
- ### current and next frames in two blocks, a 1/5 block of top and bottom.
- ### The difference in both should be very high for film gate artifacts
- ### between the 2nd and 3rd frame after a Scene Change (also 1st and 2nd are compared).
- ### We mask this through a Scene Detection filter, motion masks, etc.
- ###
- ### EXPERIMENTAL:
- ### It still grabs too many false-positives, and leaves many positives-positives undone
- ### a better approach would be to automatically bookmark every scene change and manually freezeframe them
- ###
- ###
- ### Dependencies:
- ###
- ### Required:
- ### ------------
- ###
- ### MVTools (v2.5.11.3 or higher) (http://avisynth.org.ru/mvtools/mvtools2.html)
- ### masktools (v2a48 or higher) (http://forum.doom9.org/showthread.php?t=98985)
- ### Average (v0.92 or higher) (http://forum.doom9.org/showthread.php?t=169832)
- ### GRunT (v1.0.1 or higher) (http://forum.doom9.org/showthread.php?t=139337)
- ###
- ####################################
- function FilmGateFix(clip c, float "thr", int "window", int "thSCD1", int "thSCD2", bool "debug") {
- thr = Default(thr,1.2) # Main tweak setting, use debug and tweak according 2nd frame after Scene Change
- window = Default(window,5) # Enlarges/reduces detection area, "height()/window"
- thSCD1 = Default(thSCD1,500) # Increase to reduce number of scenes detected
- thSCD2 = Default(thSCD2,145) # Increase to reduce number of scenes detected
- Debug = Default(Debug,false) # Check what frames will be fixed and the difference value of frames for tweaking "thr"
- thr2 = 5.0 # central part of frame must change less than this to consider static scene to fix.
- c
- w=width()
- h=height()
- # Block for Scene Change detection and Motion Mask
- kind = 0
- gam = 1.2 # Could probably be exposed
- mvthr = 30 # Threshold, heavily dependent on gamma value above
- super = MSuper (pel=1, sharp=0,vpad=0,hpad=0)
- b1v = MAnalyse(super,isb=true, blksize=16,overlap=8,search=0)
- f1v = MAnalyse(super,isb=false, blksize=16,overlap=8,search=0)
- SADbv1 = MMask (b1v,kind=kind,gamma=gam,thSCD1=thSCD1,thSCD2=thSCD2)
- SADfv1 = MMask (f1v,kind=kind,gamma=gam,thSCD1=thSCD1,thSCD2=thSCD2)
- SceneChange = MSCDetection (f1v,thSCD1=thSCD1,thSCD2=thSCD2)
- mvmask = Average(SADbv1,1./2,SADfv1,1./2)
- # Film Gate happens commonly between 2nd and 3rd frame after SC
- # 1st frame is commonly garbage
- add = round(w/(window*1.0))
- T = crop(0,0,0,((-h+add)/8)*8)
- B = crop(0,((h-add)/8)*8,0,0)
- L = crop(0,0,((-w+add)/8)*8,0)
- R = crop(((w-add)/8)*8,0,0,0)
- CTB = crop(0,((add)/8)*8,0,-((add)/8)*8)
- CLR = crop(round(((add*1.5)/8)*8),0,round(-((add*1.5)/8)*8),0)
- SC2 = mt_logic(SceneChange,selectevery(SceneChange,1,-1),"max",U=3,V=3)
- # Here, if after SC top area changes more than "thr" compared to bottom area
- # then apply one FreezeFrame() for first SC frame, and another FreezeFrame() for the 2nd one,
- # they (1st and 2nd) compute individually. There is a motionmask on top to rule out false positives.
- scriptclip("""(abs(YDifferenceToNext(T)-YDifferenceToNext(B))>"""+string(thr)+""" && abs(YDifferenceToNext(CTB))<"""+
- \ string(thr2)+""") || (abs(YDifferenceToNext(L)-YDifferenceToNext(R))>"""+string(thr)+
- \ """ && abs(YDifferenceToNext(CLR))<"""+string(thr2)+""") ?"""+
- \ """(YplaneMax(SC2)>254?(YDifferenceFromPrevious(SC2)>250?(AverageLuma(mvmask)<"""+string(mvthr)+
- \ """?(LumaDifference(c,d)<3.7?freezeframe(current_frame,current_frame,current_frame+2):(YDifferenceToNext()<8.0?freezeframe(current_frame,current_frame,current_frame+1):c)):c):"""+
- \ """(AverageLuma(mvmask)<"""+string(mvthr)+"""?freezeframe(current_frame,current_frame,current_frame+1):c)):c):c""",
- \ args="T,B,L,R,c,SC2,CTB,CLR,mvmask,d=Trim(2,0)")
- # Debug block
- debug ? +\
- eval("""stackhorizontal(scriptclip("Subtitle(c,"+Chr(34)+" Top & Bottom:"+Chr(34)+"+String(YDifferenceToNext(T)-YDifferenceToNext(B))+
- \ "+Chr(34)+"\n Left & Right: "+Chr(34)+"+String(YDifferenceToNext(L)-YDifferenceToNext(R))+
- \ "+Chr(34)+"\n Center Horiz: "+Chr(34)+"+String(YDifferenceToNext(CTB))+
- \ "+Chr(34)+"\n Center Vert: "+Chr(34)+"+String(YDifferenceToNext(CLR))+
- \ "+Chr(34)+"\n AvgLuma: "+Chr(34)+"+String(LumaDifference(c,d)),
- \ align=7,size=30,lsp=10)",args="T,B,L,R,c,CTB,CLR,d=Trim(2,0)"),
- \ scriptclip("AverageLuma(mvmask)<"""+string(mvthr)+"""?((abs(YDifferenceToNext(T)-YDifferenceToNext(B))>"+string(thr)+
- \ " && abs(YDifferenceToNext(CTB))<"+string(thr2)+") || (abs(YDifferenceToNext(L)-YDifferenceToNext(R))>"+
- \ string(thr)+" && abs(YDifferenceToNext(CLR))<"+string(thr2)+") ? "+
- \ "(YplaneMax(SC2)>254?(LumaDifference(c,d)<3.7?mt_lut(c,"+Chr(34)+"255"+Chr(34)+",U=128,V=128):(YDifferenceToNext()<8.0?mt_lut(c,"+Chr(34)+"255"+Chr(34)+",U=128,V=128):mt_lut(c,"+Chr(34)+"0"+Chr(34)+
- \ ",U=128,V=128))):mt_lut(c,"+Chr(34)+"0"+Chr(34)+",U=128,V=128)):mt_lut(c,"+Chr(34)+"0"+Chr(34)+",U=128,V=128)):mt_lut(c,"+Chr(34)+"0"+
- \ Chr(34)+",U=128,V=128)",args="T,B,L,R,c,CTB,CLR,SC2,mvmask,d=Trim(2,0)"))
- \ crop(0,0,-(round(w/1.1)/2)*2,0).Subtitle("Frame to Freeze",align=9,size=40)""") : last }
- ####################################
- ###
- ### FillBorders()
- ###
- ### (http://forum.videohelp.com/threads/371336)
- ###
- ### Function to fill dark (use threshold) borders, in the vein of old FillMargins() function.
- ### But instead of mirroring or other approaches like resizing, this function fills/interpolates
- ### missing data from surrounding pixels.
- ### Useful to use as a clean pass after stab() and crop(x1,y1,x2,y2)
- ### for the remaining thin black borders (up to 3px)
- ###
- ### For borders of 4px and more you can enable FixFalPos, there you supply a clip
- ### without black borders (ie. before stab() ). It automatically replaces the offended frames.
- ### Some thick black borders aren't "0" black at all, they show garbage and the 3+1 pixel border
- ### may not average to 0, so a "thr2" setting is added as threshold, default 7 should be enough.
- ###
- ### Below you can still use the the FindBlackBorders() function for manual handling of thick black borders.
- ### Use ClipClop() for the stab() results according to the statistics file of FindBlackBorders()
- ###
- ### Mind you, for FillBorders() you need to manually load the AVSInpaint plugin:
- ### LoadCPlugin("AVSInpaint.dll")
- ###
- ### EXPERIMENTAL:
- ### Some thick black borders aren't value 0 at all, sometimes they average to 16, so one would
- ### need to set thr2 to >16 which will basically bypass the Stab'ed clip in a lot of dark scenes.
- ### So probably you might still want to use this for only <4px borders and FindBlackBorders() to
- ### manually find the most offending borders and problematic areas.
- ###
- ###
- ### Dependencies:
- ###
- ### masktools (v2a48 or higher) (http://forum.doom9.org/showthread.php?t=98985)
- ### GRunT (v1.0.1 or higher) (http://forum.doom9.org/showthread.php?t=139337)
- ### AVSInpaint (v2008.02.23 or higher) (http://forum.doom9.org/showthread.php?t=133682)
- ###
- ####################################
- function FillBorders(clip c, int "thr", int "pad", bool "blur", bool "debug", clip "FixFalPos", int "thr2", bool "mirror", float "PAR", bool "subsample" ) {
- thr = Default(thr, 1) # Threshold, pixel values below this will be considered borders
- pad = Default(pad, 0) # Pixels, you can expand the replacement area adding more pixels
- # (to deal with dirty borders) (use "1" to deal with 1px b/w chroma, due to the chroma subsampling nature of video)
- mirror = Default(mirror, false)
- blur = Default(blur, mirror) # Blurs the masking for the replacement area. Currently not supported for InpaintLogo()
- debug = Default(debug,false) # Show the borders that are going to be filled
- FalPos = Defined(FixFalPos) # If you supply a reference clip borders with 4 or more
- # average thr2 pixels will be replaced with the clip's frame
- thr2 = Default(thr2, 7) # Threshold for FalPos, FalPos frames sometimes have garbage borders so you need to increase threshold
- subsampl = Default(subsample,false)
- ssispmt = Findstr(VersionString(), "AviSynth+") != 0 && Findstr(VersionString(), "r1576") == 0
- c
- contoy = ssispmt ? !isy() : !isy8()
- contoy ? ssispmt ? converttoy() : converttoy8() : last
- yclip=last
- w=width()
- h=height()
- # 4px or greater
- L4=FalPos ? crop(0,0,-w+4,0) : nop()
- R4=FalPos ? crop(w-4,0,0 ,0) : nop()
- T4=FalPos ? crop(0,0,0,-h+4) : nop()
- B4=FalPos ? crop(0,h-4,0 ,0) : nop()
- # 3px
- L3=crop(0,0,-w+3,0)
- R3=crop(w-3,0,0 ,0)
- T3=crop(0,0,0,-h+3)
- B3=crop(0,h-3,0 ,0)
- # 2px
- L2=crop(L3,0,0,-1, 0)
- R2=crop(R3,1,0,0 , 0)
- T2=crop(T3,0,0,0 ,-1)
- B2=crop(B3,0,1,0 , 0)
- # 1px
- L1=crop(L3,0,0,-2,0 )
- R1=crop(R3,2,0,0 ,0 )
- T1=crop(T3,0,0,0 ,-2)
- B1=crop(B3,0,2,0 ,0 )
- c
- Fill = gScriptClip("""
- yclip
- pad= blur ? pad+2 : pad
- L1A = AverageLuma(L1)
- R1A = AverageLuma(R1)
- T1A = AverageLuma(T1)
- B1A = AverageLuma(B1)
- x1o = L1A < thr ? (AverageLuma(L2) < thr ? (AverageLuma(L3) < thr ? 3 : 2) : 1) : 0
- x1 = L1A < thr ? x1o+pad : x1o
- x2o = R1A < thr ? (AverageLuma(R2) < thr ? (AverageLuma(R3) < thr ? 3 : 2) : 1) : 0
- x2 = R1A < thr ? x2o+pad : x2o
- y1o = T1A < thr ? (AverageLuma(T2) < thr ? (AverageLuma(T3) < thr ? 3 : 2) : 1) : 0
- y1 = T1A < thr ? y1o+pad : y1o
- y2o = B1A < thr ? (AverageLuma(B2) < thr ? (AverageLuma(B3) < thr ? 3 : 2) : 1) : 0
- y2 = B1A < thr ? y2o+pad : y2o
- FalPos = FalPos ? ((x1-pad > 2 || x2-pad > 2 || y1-pad > 2 || y2-pad > 2 )
- \ ? ((AverageLuma(L4) < thr2) || (AverageLuma(R4) < thr2) || (AverageLuma(T4) < thr2) || (AverageLuma(B4) < thr2)
- \ ? true : false) : false) : false
- cropnpad = (x1+y1+x2+y2>0)
- ter = !FalPos && cropnpad
- x1inp=cropnpad && subsampl ? int(round(x1o/2.0)*2) : x1
- x2inp=cropnpad && subsampl ? int(round(x2o/2.0)*2) : x2
- y1inp=cropnpad && subsampl ? int(round(y1o/2.0)*2) : y1
- y2inp=cropnpad && subsampl ? int(round(y2o/2.0)*2) : y2
- PaCl = mirror && !ter ? c.crop(x1inp,y1inp,-x2inp,-y2inp,align=true).Padding(x1inp,y1inp,x2inp,y2inp) : c
- msk = LetterBox(BlankClip(last, Color_yuv=$000000),y1,y2,x1,x2,$ffffff)
- msk = !mirror ? msk.mt_lut("x 128 > 255 x ?") : msk
- msk = !mirror && blur ? msk.mt_convolution("1 1 1 1 1", "1 1 1 1 1") : msk
- msk = contoy ? ssispmt ? CombinePlanes(msk,c,planes="YUV",sample_clip=c) : YToUV(c.UToY8(),c.VToY8(),msk) : msk
- fill = FalPos ? trim(c,0,current_frame-1)++trim(FixFalPos,current_frame,-1)++trim(c,current_frame+1,0) : \
- (ter ? InpaintLogo(c, radius=max(x1,y1,x2,y2)+max(2,pad), mask=msk,ChromaTensor=subsampl,PixelAspect=PAR,PreBlur=mirror && blur ? 2.5 : undefined) : PaCl)
- sub = debug ? subtitle(msk,"Bordered",align=3,size=round(h/20.0)) : nop()
- debug ? (ter?sub:msk) : fill
- """,args="yclip,c,ssispmt,contoy,thr,thr2,L4,R4,T4,B4,L3,R3,T3,B3,L2,R2,T2,B2,L1,R1,T1,B1,pad,blur,debug,FalPos,FixFalPos,mirror,subsampl,PAR")
- !debug ? Fill : \
- eval("""
- box = h/4.0
- m = 2
- corner = crop(mt_lut("255"),round((w-box)/m)*m,round((h-box)/m)*m,0,0,align=true)
- corner = corner.addborders(0,0,round((w/2.0-box)/m)*m,round(box/m)*m).mt_lut("x 255 < 0 255 ?")
- horiz = stackhorizontal(corner,corner.fliphorizontal())
- verti = stackvertical(horiz,horiz.flipvertical())
- mt_merge(c,Fill.pointresize(w,h),verti,luma=true)""") }
- ####################################
- ###
- ### FindBlackBorders()
- ###
- ### (http://forum.videohelp.com/threads/371336)
- ###
- ### Script to find sources with black borders for example as a result of bad deshaking, run on analysis pass
- ### The output file is formatted to be imported to avspmod as bookmarks
- ### use ClipClop() afterwards on a scene by scene basis to fix this.
- ###
- ### "width" is border thickness for detection
- ### "thr" is threshold, pixel values below this will be considered borders
- ### "path" is the path to store the statistics file, with end backslash. Default is "C:"
- ### "filename" is the statistics file name. In case you don't want to overwrite old ones
- ###
- ### Dependencies:
- ###
- ### Required:
- ### ------------
- ###
- ### masktools (v2a48 or higher) (http://forum.doom9.org/showthread.php?t=98985)
- ### Dither (v1.26.5 or higher) (http://forum.doom9.org/showthread.php?p=1386559#post1386559)
- ###
- ####################################
- function FindBlackBorders(clip c, int "width", int "thr", string "path", string "filename") {
- add = Default(width,1) # Width for detection, normally 1 should suffix to most situations
- thr = Default(thr,1) # Threshold for detection, pixels lower than this value will be considered a border
- path = Default(path, "C:") # This is the path to store the statistics file
- filename = Default(filename, "FindBlackBorders - Statistics.log") # Filename of the statistics file
- c
- converttoy8()
- w=width()
- h=height()
- L1=crop(0,0,-w+add,0)
- R1=crop(w-add,0,0 ,0)
- T1=crop(0,0,0,-h+add)
- B1=crop(0,h-add,0 ,0)
- ScriptClip("""
- x1 = AverageLuma(L1) < thr ? true : false
- x2 = AverageLuma(R1) < thr ? true : false
- y1 = AverageLuma(T1) < thr ? true : false
- y2 = AverageLuma(B1) < thr ? true : false
- function IsBorder(clip c, bool x1, bool x2, bool y1, bool y2) {return (x1||y1||x2||y2)?true:false}
- q = chr(34)chr(34)chr(34)
- WriteFileIf(""+path+"\"+filename+"", " "+string(IsBorder(x1,y1,x2,y2))+" ", q+"CHAPTER00="+q,
- \ "FFFormatTime_stabi(round((current_frame * 1000) / framerate()))", "", "")
- """,args="thr,L1,R1,T1,B1,path,filename")
- converttoyv12()
- # Bug or limitations of 8-bit masktools with Overlay or...
- # mt_merge (masking PC Range masks) so use Dither tools
- Dither_merge16_8(Dither_convert_8_to_16(),Dither_convert_8_to_16(c),mt_lut("255"),luma=true)
- ditherpost(mode=-1) }
- ####################################
- ###
- ### Stab2()
- ###
- ### (http://forum.videohelp.com/threads/371336)
- ###
- ### For completeness I'm going to list all the shortcomings of Depan plugin
- ### maybe a programmer realises the urge of an avisynth bug-free stabilizer:
- ### -Color tint (hue shift to green) when subpixel>0 to stablizated frames --> addressed here
- ### -Artifacts occasionally on frame borders (1px skew) --> crop out, check example
- ### -No advanced border fill --> addressed above ( FillBorders() )
- ### -Some false-positives when people clapping, trembling...
- ### -Requires mod 4 inputs?
- ### -No medium jitter fix
- ### -Some thick borders (false positives) aren't 0 black on the inner side
- ###
- #######################################
- ###
- ### What I improved over original Stab() was to work around the first issue by
- ### counter fixing the planes hue deviation on a frame by frame basis with float point precision
- ### Implemented a FixPalPos to replace frames that present black borders of 3 or more pixels
- ### with source frames, check output just in case, since some borders don't average to 0 black (rare).
- ### Also supplied a more contrasty clip version for more subtle global motion analysis
- ### Prefilter is for the prefilter clip, in case the clip is very grainy/noisy
- ### Finally a few more things were introduced by testing and checking other script versions.
- ###
- ###
- ### Required (*Optional):
- ### ------------
- ### Depan (v1.10.1 or higher) (http://avisynth.org.ru/depan/depan.html)
- ### DePanEstimate (v1.10.1 or higher) (http://avisynth.org.ru/depan/depan.html)
- ### Dither (v1.26.5 or higher) (http://forum.doom9.org/showthread.php?p=1386559#post1386559)
- ### SmoothAdjust* (v3.0 or higher) (http://forum.doom9.org/showthread.php?t=154971)
- ### AutoAdjust (v2.50 or higher) (http://forum.doom9.org/showthread.php?t=167573)
- ### GRunT (v1.0.1 or higher) (http://forum.doom9.org/showthread.php?t=139337)
- ### Repair (vanilla or tp7's branch) (http://avisynth.nl/index.php/Removegrain)
- ###
- ### Example:
- ###
- ### stab2(UVfix=true,FixFalPos=true)
- ### crop(2,2,-2,-2) # to remove garbage around borders
- ###
- ####################################
- function Stab2 (clip clp, int "ts", int "range", int "dxmax", int "dymax", bool "UVfix", bool "FixFalPos", float "zoom", int "mirror", float "PAR", clip "Prefilter") {
- ts = default(ts, 7) #frames to temporal average for better motion estimation (max. 7)
- range = default(range, 3) #frames before/after to estimate motion
- dxmax = default(dxmax, 15) #maximum deviation in pixels (use at least 8 for SD)
- dymax = default(dymax, 15) #x, and y should be the same
- zoom = default(zoom, 1) #maximum zoom factor (1 disabled)
- mirror = default(mirror, 0) #Edge filling. 0 off, 15 everything on
- PAR = default(PAR, 1.0) #PAR of your source
- UVfix = default(UVfix, true) # Fixes the bug of change of HUE in Depan,
- FixFalPos = default(FixFalPos, true) # Fixes borders of 3 or more pixels wide. Use along crop(2,2,-2,-2)...
- # ...after stab2() to get rid of border issues entirely
- Pref = Defined(Prefilter) ? Prefilter : clp
- temp = Pref.TemporalSoften(ts,255,255,25,2) # SC thr to 25 otherwise pans will stutter
- rep = temp.Repair(Pref.TemporalSoften(1,255,255,25,2))
- inter = Interleave(rep,Pref)
- # temporal stable auto-contrast (better subpixel detection)
- Luma_Expa = AutoAdjust(inter,temporal_radius=10,auto_balance=false,auto_gain=true,use_interp=true,\
- avg_safety=0.25,dark_limit=10,bright_limit=10,gamma_limit=1.0,dark_exclude=0.05,bright_exclude=0.05,\
- chroma_process=0,scd_threshold=16,input_tv=false,output_tv=false,high_bitdepth=false,debug_view=false)
- mdata = DePanEstimate(Luma_Expa,range=range,pixaspect=PAR,trust=0,dxmax=dxmax,dymax=dymax,zoommax=zoom,improve=true)
- DePan(Defined(Prefilter)?Interleave(rep,clp):inter,data=mdata,offset=-1,mirror=mirror,pixaspect=PAR,matchfields=false,subpixel=2)
- SelectEvery(2,0)
- # from depansafe() function
- FixFalPos ? eval("""
- thick = 2.0 # removing >2px wide borders
- cropx = ceil(dxmax)*2
- ratiox = "YPlaneMax("+string(ceil(99-thick/cropx*100))+")"
- crop(0,0,0,cropx).conditionalfilter(last,clp,ratiox,">","0")
- crop(0,height-cropx,0,0).conditionalfilter(last,clp,ratiox,">","0")
- crop(0,0,cropx,0).conditionalfilter(last,clp,ratiox,">","0")
- crop(width-cropx,0,0,0).conditionalfilter(last,clp,ratiox,">","0")""") : last
- UVfix ? eval("""
- ScriptClip ("
- blue=round((AverageChromaU(clp) - AverageChromaU()) * 256.0)
- red=round((AverageChromaV(clp) - AverageChromaV()) * 256.0)
- Dither_convert_8_to_16()
- SmoothTweak16(saturation=1.0,hue1=min(384,blue),hue2=min(384,red),HQ=true)
- DitherPost(stacked=true,prot=false,mode=6)
- ", args="clp" ) """) : last
- }
- ####################################
- ###
- ### Stab3()
- ###
- ### same as Stab2 but with some changes
- ###
- ####################################
- function Stab3 (clip clp, int "ts", int "range", int "dxmax", int "dymax", bool "UVfix", bool "FixFalPos", float "zoom", int "mirror", float "PAR", clip "Prefilter", int "Luma_Exp", bool "Fill3pBorders", clip "FalPosclip") {
- ts = default(ts, 7) #frames to temporal average for better motion estimation (max. 7)
- range = default(range, 1) #frames before/after to estimate motion
- dxmax = default(dxmax, Round(clp.width()/180.0)) #maximum deviation in pixels
- dymax = default(dymax, dxmax) #x, and y should be the same
- zoom = default(zoom, 1) #maximum zoom factor (1 disabled)
- mirror = default(mirror, 0) #Edge filling. 0 off, 15 everything on
- PAR = default(PAR, 1.0) #PAR of your source
- UVfix = default(UVfix, false) # Fixes the bug of change of HUE in Depan, not need in depan 1.13.1 and up
- b3fix = default(Fill3pBorders, true) # Fixes borders of 3 or less pixels wide.
- FixFalPos = default(FixFalPos, true) # Fixes borders of 3 or more pixels wide. Use along crop(2,2,-2,-2)...
- # ...after stab2() to get rid of border issues entirely
- Lumae = default(Luma_Exp, 1) #Luma Rebuild
- Pref = Defined(Prefilter) ? Prefilter : clp
- temp = Pref.TemporalSoften(ts,255,255,25,2) # SC thr to 25 otherwise pans will stutter
- rep = temp.Repair(Pref.TemporalSoften(1,255,255,25,2))
- inter = Interleave(rep,Pref)
- # temporal stable auto-contrast (better subpixel detection)
- Luma_Expa = Lumae==2 ? AutoAdjust(inter,temporal_radius=10,auto_balance=false,auto_gain=true,use_interp=true,\
- avg_safety=0.25,dark_limit=10,bright_limit=10,gamma_limit=1.0,dark_exclude=0.05,bright_exclude=0.05,\
- chroma_process=0,scd_threshold=16,input_tv=false,output_tv=false,high_bitdepth=false,debug_view=false) : \
- Lumae==1 ? inter.ColorYUV(levels="TV->PC") : inter
- mdata = DePanEstimate(Luma_Expa,range=range,pixaspect=PAR,trust=0,dxmax=dxmax,dymax=dymax,zoommax=zoom)
- DePan(Defined(Prefilter)?Interleave(rep,clp):inter,data=mdata,offset=-1,mirror=b3fix ? 0 : mirror,pixaspect=PAR,matchfields=false,subpixel=2)
- SelectEvery(2,0)
- stabclip=last
- FalPosclip = !defined(FalPosclip) && FixFalPos && mirror==15 && b3fix ? clp : FalPosclip
- # from depansafe() function
- b3fix && defined(FalPosclip) ? FalPosclip : FixFalPos ? eval("""
- thick = b3fix ? 3.0 : 2.0 # removing >2px wide borders
- cropx = dxmax*2
- ratiox = "YPlaneMax("+string(ceil(99-thick/cropx*100))+")"
- crop(0,0,0,cropx).conditionalfilter(last,clp,ratiox,">","0")
- crop(0,height-cropx,0,0).conditionalfilter(last,clp,ratiox,">","0")
- crop(0,0,cropx,0).conditionalfilter(last,clp,ratiox,">","0")
- crop(width-cropx,0,0,0).conditionalfilter(last,clp,ratiox,">","0")""") : last
- subsampl = b3fix ? Findstr(VersionString(), "AviSynth+") != 0 && Findstr(VersionString(), "r1576") == 0 ? !(clp.is444() || clp.isy()) : VersionNumber() < 2.60 ? clp.isyv12() : !(clp.isyv24() || clp.isy8()) : nop()
- b3fix ? stabclip.FillBorders(pad=subsampl && mirror!=15 ? 1 : 0,subsample=subsampl,FixFalPos=defined(FalPosclip) || FixFalPos ? last : Undefined, mirror=mirror==15,PAR=PAR) : last
- UVfix ? eval("""
- lumaf=last
- ScriptClip ("
- blue=round((AverageChromaU(clp) - AverageChromaU()) * 256.0)
- red=round((AverageChromaV(clp) - AverageChromaV()) * 256.0)
- Dither_convert_8_to_16()
- SmoothTweak16(saturation=1.0,hue1=min(384,blue),hue2=min(384,red),HQ=true)
- DitherPost(stacked=true,prot=false,mode=6,y=1,slice=false)
- ", args="clp" )
- Mergeluma(lumaf)
- """) : last
- }
- ######### HELPER FUNCTIONS #########
- # Helper function for FindBlackBorders() from FFMS2.avsi
- function FFFormatTime_stabi(int ms) {
- s = ms / 1000
- ms = ms % 1000
- m = s / 60
- s = s % 60
- h = m / 60
- m = m % 60
- return string(h) + ":" + string(m,"%02.0f") + ":" + string(s,"%02.0f") + "." + string(ms,"%03.0f")}
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement