Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ------------------------------------------------------------------------------------------------
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.17.14-arch1-1-ARCH] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: WDC WD40EFAX-68JH4N0
- Serial Number: WD-WX61DC9EHT22
- LU WWN Device Id: 5 0014ee 212333ca7
- Firmware Version: 82.00A82
- User Capacity: 4,000,787,030,016 bytes [4.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Form Factor: 3.5 inches
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-3 T13/2161-D revision 5
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Wed Mar 25 16:32:28 2020 EET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, frozen [SEC2]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x04) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (43124) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 532) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x3039) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 100 253 021 - 0
- 4 Start_Stop_Count -O--CK 100 100 000 - 4
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 100 100 000 - 18
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 4
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 0
- 193 Load_Cycle_Count -O--CK 200 200 000 - 7
- 194 Temperature_Celsius -O---K 114 112 000 - 33
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 100 253 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x04 GPL R/O 256 Device Statistics log
- 0x04 SL R/O 8 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x0c GPL R/O 2048 Pending Defects log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x24 GPL R/O 294 Current Device Internal Status Data log
- 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
- 0xb7 GPL,SL VS 78 Device vendor specific log
- 0xb9 GPL,SL VS 4 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 93 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- Device Error Count: 150 (device log contains only the most recent 24 errors)
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 150 [5] occurred at disk power-on lifetime: 18 hours (0 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 00 00 01 d1 c0 76 10 40 00 Error: IDNF at LBA = 0x1d1c07610 = 7814018576
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 10 00 e8 00 00 00 00 0a 10 40 08 02:13:09.523 WRITE FPDMA QUEUED
- 61 00 10 00 e0 00 01 d1 c0 76 10 40 08 02:13:09.523 WRITE FPDMA QUEUED
- 61 01 00 00 d8 00 00 00 99 bc 70 40 08 02:13:09.523 WRITE FPDMA QUEUED
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 02:13:09.523 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 02:13:09.523 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- Error 149 [4] occurred at disk power-on lifetime: 18 hours (0 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 00 00 00 00 00 0a 10 40 00 Error: IDNF at LBA = 0x00000a10 = 2576
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 01 00 00 98 00 00 00 99 bc 70 40 08 02:13:02.304 WRITE FPDMA QUEUED
- 61 00 10 00 90 00 01 d1 c0 76 10 40 08 02:13:02.304 WRITE FPDMA QUEUED
- 61 00 10 00 88 00 00 00 00 0a 10 40 08 02:13:02.304 WRITE FPDMA QUEUED
- 61 01 00 00 80 00 00 00 99 bb 68 40 08 02:13:02.304 WRITE FPDMA QUEUED
- ef 00 10 00 02 00 00 00 00 00 00 a0 08 02:13:02.304 SET FEATURES [Enable SATA feature]
- Error 148 [3] occurred at disk power-on lifetime: 18 hours (0 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 00 00 01 d1 c0 76 10 40 00 Error: IDNF at LBA = 0x1d1c07610 = 7814018576
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 01 00 00 00 00 00 00 99 bc 70 40 08 02:12:55.087 WRITE FPDMA QUEUED
- 61 01 00 00 c8 00 00 00 99 bb 68 40 08 02:12:55.087 WRITE FPDMA QUEUED
- 61 00 10 00 c0 00 00 00 00 0a 10 40 08 02:12:55.087 WRITE FPDMA QUEUED
- 61 00 10 00 b8 00 01 d1 c0 76 10 40 08 02:12:55.087 WRITE FPDMA QUEUED
- 61 00 10 00 b0 00 01 d1 c0 74 10 40 08 02:12:55.087 WRITE FPDMA QUEUED
- Error 147 [2] occurred at disk power-on lifetime: 18 hours (0 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 00 00 00 00 99 ba e0 40 00 Error: IDNF at LBA = 0x0099bae0 = 10074848
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 80 00 88 00 00 00 99 ba e0 40 08 02:12:48.053 WRITE FPDMA QUEUED
- 61 00 80 00 80 00 00 00 99 ba 50 40 08 02:12:48.053 WRITE FPDMA QUEUED
- 60 00 10 00 e0 00 00 00 00 0a 10 40 08 02:12:47.727 READ FPDMA QUEUED
- 60 00 10 00 d8 00 01 d1 c0 74 10 40 08 02:12:47.727 READ FPDMA QUEUED
- 60 00 10 00 d0 00 01 d1 c0 76 10 40 08 02:12:47.727 READ FPDMA QUEUED
- Error 146 [1] occurred at disk power-on lifetime: 18 hours (0 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 00 00 00 00 99 8e 60 40 00 Error: IDNF at LBA = 0x00998e60 = 10063456
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 10 00 90 00 01 d1 c0 76 10 40 08 02:12:39.980 READ FPDMA QUEUED
- 60 00 10 00 80 00 01 d1 c0 74 10 40 08 02:12:39.980 READ FPDMA QUEUED
- 60 00 10 00 70 00 00 00 00 0a 10 40 08 02:12:39.980 READ FPDMA QUEUED
- 61 00 08 00 18 00 00 00 99 8e 60 40 08 02:12:39.980 WRITE FPDMA QUEUED
- 61 01 00 00 00 00 00 00 99 8d 58 40 08 02:12:39.979 WRITE FPDMA QUEUED
- Error 145 [0] occurred at disk power-on lifetime: 18 hours (0 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 00 00 00 00 99 8b 48 40 00 Error: IDNF at LBA = 0x00998b48 = 10062664
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 01 00 00 d8 00 00 00 99 8d 58 40 08 02:12:32.959 WRITE FPDMA QUEUED
- 61 01 00 00 d0 00 00 00 99 8b 48 40 08 02:12:32.958 WRITE FPDMA QUEUED
- 61 01 00 00 c8 00 00 00 99 8c 50 40 08 02:12:32.958 WRITE FPDMA QUEUED
- 61 01 00 00 c0 00 00 00 99 8a 40 40 08 02:12:32.958 WRITE FPDMA QUEUED
- 61 01 00 00 b8 00 00 00 99 89 38 40 08 02:12:32.957 WRITE FPDMA QUEUED
- Error 144 [23] occurred at disk power-on lifetime: 18 hours (0 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 00 00 00 00 7d fd 58 40 00 Error: IDNF at LBA = 0x007dfd58 = 8256856
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 01 00 00 d0 00 00 00 7d ff 68 40 08 02:12:09.189 WRITE FPDMA QUEUED
- 61 00 10 00 40 00 01 d1 c0 76 10 40 08 02:12:08.937 WRITE FPDMA QUEUED
- 61 00 10 00 38 00 00 00 00 0a 10 40 08 02:12:08.937 WRITE FPDMA QUEUED
- 61 01 00 00 30 00 00 00 7d fd 58 40 08 02:12:08.937 WRITE FPDMA QUEUED
- 61 01 00 00 28 00 00 00 7d fe 60 40 08 02:12:08.937 WRITE FPDMA QUEUED
- Error 143 [22] occurred at disk power-on lifetime: 18 hours (0 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 00 00 01 d1 c0 76 10 40 00 Error: IDNF at LBA = 0x1d1c07610 = 7814018576
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 01 00 00 98 00 00 00 7d fe 60 40 08 02:12:01.671 WRITE FPDMA QUEUED
- 61 01 00 00 78 00 00 00 7d fd 58 40 08 02:12:01.671 WRITE FPDMA QUEUED
- 61 00 10 00 70 00 00 00 00 0a 10 40 08 02:12:01.671 WRITE FPDMA QUEUED
- 61 00 10 00 68 00 01 d1 c0 76 10 40 08 02:12:01.671 WRITE FPDMA QUEUED
- 61 00 10 00 60 00 01 d1 c0 74 10 40 08 02:12:01.671 WRITE FPDMA QUEUED
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Conveyance offline Completed without error 00% 16 -
- # 2 Extended offline Aborted by host 10% 15 -
- # 3 Extended offline Completed without error 00% 0 -
- # 4 Short offline Aborted by host 80% 0 -
- # 5 Short offline Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- Device State: Active (0)
- Current Temperature: 33 Celsius
- Power Cycle Min/Max Temperature: 23/33 Celsius
- Lifetime Min/Max Temperature: 23/35 Celsius
- Under/Over Temperature Limit Count: 0/0
- Vendor specific:
- 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/65 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (146)
- Index Estimated Time Temperature Celsius
- 147 2020-03-25 08:35 32 *************
- ... ..(141 skipped). .. *************
- 289 2020-03-25 10:57 32 *************
- 290 2020-03-25 10:58 33 **************
- ... ..( 60 skipped). .. **************
- 351 2020-03-25 11:59 33 **************
- 352 2020-03-25 12:00 32 *************
- ... ..( 23 skipped). .. *************
- 376 2020-03-25 12:24 32 *************
- 377 2020-03-25 12:25 33 **************
- ... ..( 79 skipped). .. **************
- 457 2020-03-25 13:45 33 **************
- 458 2020-03-25 13:46 ? -
- 459 2020-03-25 13:47 33 **************
- 460 2020-03-25 13:48 32 *************
- ... ..( 3 skipped). .. *************
- 464 2020-03-25 13:52 32 *************
- 465 2020-03-25 13:53 ? -
- 466 2020-03-25 13:54 33 **************
- 467 2020-03-25 13:55 32 *************
- 468 2020-03-25 13:56 32 *************
- 469 2020-03-25 13:57 33 **************
- ... ..( 23 skipped). .. **************
- 15 2020-03-25 14:21 33 **************
- 16 2020-03-25 14:22 34 ***************
- ... ..( 55 skipped). .. ***************
- 72 2020-03-25 15:18 34 ***************
- 73 2020-03-25 15:19 33 **************
- ... ..( 34 skipped). .. **************
- 108 2020-03-25 15:54 33 **************
- 109 2020-03-25 15:55 34 ***************
- ... ..( 7 skipped). .. ***************
- 117 2020-03-25 16:03 34 ***************
- 118 2020-03-25 16:04 ? -
- 119 2020-03-25 16:05 23 ****
- 120 2020-03-25 16:06 24 *****
- 121 2020-03-25 16:07 25 ******
- 122 2020-03-25 16:08 26 *******
- 123 2020-03-25 16:09 27 ********
- 124 2020-03-25 16:10 27 ********
- 125 2020-03-25 16:11 28 *********
- 126 2020-03-25 16:12 28 *********
- 127 2020-03-25 16:13 29 **********
- 128 2020-03-25 16:14 29 **********
- 129 2020-03-25 16:15 30 ***********
- 130 2020-03-25 16:16 30 ***********
- 131 2020-03-25 16:17 31 ************
- ... ..( 2 skipped). .. ************
- 134 2020-03-25 16:20 31 ************
- 135 2020-03-25 16:21 32 *************
- ... ..( 3 skipped). .. *************
- 139 2020-03-25 16:25 32 *************
- 140 2020-03-25 16:26 33 **************
- ... ..( 5 skipped). .. **************
- 146 2020-03-25 16:32 33 **************
- SCT Error Recovery Control:
- Read: 70 (7.0 seconds)
- Write: 70 (7.0 seconds)
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Flags Description
- 0x01 ===== = = === == General Statistics (rev 1) ==
- 0x01 0x008 4 4 --- Lifetime Power-On Resets
- 0x01 0x010 4 18 --- Power-on Hours
- 0x01 0x018 6 9445899603 --- Logical Sectors Written
- 0x01 0x020 6 22899112 --- Number of Write Commands
- 0x01 0x028 6 3421718491 --- Logical Sectors Read
- 0x01 0x030 6 6711175 --- Number of Read Commands
- 0x01 0x038 6 64800000 --- Date and Time TimeStamp
- 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
- 0x03 0x008 4 18 --- Spindle Motor Power-on Hours
- 0x03 0x010 4 16 --- Head Flying Hours
- 0x03 0x018 4 7 --- Head Load Events
- 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
- 0x03 0x028 4 0 --- Read Recovery Attempts
- 0x03 0x030 4 0 --- Number of Mechanical Start Failures
- 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
- 0x03 0x040 4 0 --- Number of High Priority Unload Events
- 0x04 ===== = = === == General Errors Statistics (rev 1) ==
- 0x04 0x008 4 150 --- Number of Reported Uncorrectable Errors
- 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
- 0x05 ===== = = === == Temperature Statistics (rev 1) ==
- 0x05 0x008 1 33 --- Current Temperature
- 0x05 0x010 1 - --- Average Short Term Temperature
- 0x05 0x018 1 - --- Average Long Term Temperature
- 0x05 0x020 1 35 --- Highest Temperature
- 0x05 0x028 1 27 --- Lowest Temperature
- 0x05 0x030 1 - --- Highest Average Short Term Temperature
- 0x05 0x038 1 - --- Lowest Average Short Term Temperature
- 0x05 0x040 1 - --- Highest Average Long Term Temperature
- 0x05 0x048 1 - --- Lowest Average Long Term Temperature
- 0x05 0x050 4 0 --- Time in Over-Temperature
- 0x05 0x058 1 65 --- Specified Maximum Operating Temperature
- 0x05 0x060 4 0 --- Time in Under-Temperature
- 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
- 0x06 ===== = = === == Transport Statistics (rev 1) ==
- 0x06 0x008 4 24 --- Number of Hardware Resets
- 0x06 0x010 4 11 --- Number of ASR Events
- 0x06 0x018 4 0 --- Number of Interface CRC Errors
- 0xff ===== = = === == Vendor Specific Statistics (rev 1) ==
- 0xff 0x008 7 0 --- Vendor Specific
- 0xff 0x010 7 0 --- Vendor Specific
- 0xff 0x018 7 0 --- Vendor Specific
- |||_ C monitored condition met
- ||__ D supports DSN
- |___ N normalized value
- Pending Defects log (GP Log 0x0c)
- No Defects Logged
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000d 2 0 Non-CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 1741 Vendor specific
- ------------------------------------------------------------------------------------------------
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.17.14-arch1-1-ARCH] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: WDC WD40EFAX-68JH4N0
- Serial Number: WD-WX61DC9EHY2E
- LU WWN Device Id: 5 0014ee 267888324
- Firmware Version: 82.00A82
- User Capacity: 4,000,787,030,016 bytes [4.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Form Factor: 3.5 inches
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-3 T13/2161-D revision 5
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Wed Mar 25 16:33:07 2020 EET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, frozen [SEC2]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (20880) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 50) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x3039) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 100 253 051 - 0
- 3 Spin_Up_Time POS--K 100 253 021 - 0
- 4 Start_Stop_Count -O--CK 100 100 000 - 2
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 100 100 000 - 3
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 2
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 0
- 193 Load_Cycle_Count -O--CK 200 200 000 - 2
- 194 Temperature_Celsius -O---K 115 112 000 - 32
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 100 253 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x04 GPL R/O 256 Device Statistics log
- 0x04 SL R/O 8 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x0c GPL R/O 2048 Pending Defects log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x24 GPL R/O 294 Current Device Internal Status Data log
- 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
- 0xb7 GPL,SL VS 78 Device vendor specific log
- 0xb9 GPL,SL VS 4 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 93 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- Device Error Count: 47 (device log contains only the most recent 24 errors)
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 47 [22] occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 00 00 00 39 04 a2 50 40 00 Error: IDNF at LBA = 0x3904a250 = 956605008
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 80 00 b8 00 00 39 04 a2 50 40 08 01:23:48.987 WRITE FPDMA QUEUED
- 61 00 08 00 b0 00 00 39 04 a2 30 40 08 01:23:48.987 WRITE FPDMA QUEUED
- 60 00 10 00 18 00 00 00 00 0a 10 40 08 01:23:48.594 READ FPDMA QUEUED
- 60 00 10 00 10 00 01 d1 c0 74 10 40 08 01:23:48.594 READ FPDMA QUEUED
- 60 00 10 00 08 00 01 d1 c0 76 10 40 08 01:23:48.594 READ FPDMA QUEUED
- Error 46 [21] occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 00 00 00 4e 9f 3b d8 40 00 Error: IDNF at LBA = 0x4e9f3bd8 = 1319058392
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 10 00 c8 00 01 d1 c0 76 10 40 08 01:23:41.281 READ FPDMA QUEUED
- 60 00 10 00 b8 00 01 d1 c0 74 10 40 08 01:23:41.281 READ FPDMA QUEUED
- 60 00 10 00 a0 00 00 00 00 0a 10 40 08 01:23:41.281 READ FPDMA QUEUED
- 61 00 18 00 50 00 00 4e 9f 3b d8 40 08 01:23:41.281 WRITE FPDMA QUEUED
- 61 00 08 00 30 00 00 4e 9f 36 20 40 08 01:23:41.281 WRITE FPDMA QUEUED
- Error 45 [20] occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 00 00 00 4e 9e 71 08 40 00 Error: IDNF at LBA = 0x4e9e7108 = 1319006472
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 08 00 10 00 00 4e 9f 36 20 40 08 01:23:34.273 WRITE FPDMA QUEUED
- 61 00 08 00 08 00 00 4e 9e 71 08 40 08 01:23:34.272 WRITE FPDMA QUEUED
- 61 00 08 00 00 00 00 4e 9e 70 f0 40 08 01:23:34.271 WRITE FPDMA QUEUED
- 61 00 08 00 f0 00 00 4e 9e 16 f8 40 08 01:23:34.270 WRITE FPDMA QUEUED
- 61 00 08 00 e8 00 00 4e 9c fc a8 40 08 01:23:34.269 WRITE FPDMA QUEUED
- Error 44 [19] occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 00 00 00 4c 81 86 40 40 00 Error: IDNF at LBA = 0x4c818640 = 1283556928
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 10 00 40 00 01 d1 c0 76 10 40 08 01:23:10.210 READ FPDMA QUEUED
- 60 00 10 00 30 00 01 d1 c0 74 10 40 08 01:23:10.210 READ FPDMA QUEUED
- 60 00 10 00 18 00 00 00 00 0a 10 40 08 01:23:10.210 READ FPDMA QUEUED
- 61 00 10 00 c0 00 00 4c 81 86 40 40 08 01:23:10.210 WRITE FPDMA QUEUED
- 61 00 08 00 a0 00 00 4c 81 85 80 40 08 01:23:10.210 WRITE FPDMA QUEUED
- Error 43 [18] occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 00 00 00 4c 81 84 a8 40 00 Error: IDNF at LBA = 0x4c8184a8 = 1283556520
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 08 00 80 00 00 4c 81 85 80 40 08 01:23:03.204 WRITE FPDMA QUEUED
- 61 00 28 00 78 00 00 4c 81 84 a8 40 08 01:23:00.296 WRITE FPDMA QUEUED
- 61 00 40 00 70 00 00 4c 81 83 b8 40 08 01:23:00.296 WRITE FPDMA QUEUED
- 61 00 08 00 68 00 00 4c 81 81 90 40 08 01:23:00.296 WRITE FPDMA QUEUED
- 61 00 08 00 60 00 00 4c 81 7e e0 40 08 01:23:00.295 WRITE FPDMA QUEUED
- Error 42 [17] occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 00 00 00 1a e4 90 40 40 00 Error: IDNF at LBA = 0x1ae49040 = 451186752
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 10 00 80 00 01 d1 c0 76 10 40 08 01:22:45.396 READ FPDMA QUEUED
- 60 00 10 00 70 00 01 d1 c0 74 10 40 08 01:22:45.396 READ FPDMA QUEUED
- 60 00 10 00 58 00 00 00 00 0a 10 40 08 01:22:45.396 READ FPDMA QUEUED
- 61 01 00 00 18 00 00 1a e4 90 40 40 08 01:22:45.396 WRITE FPDMA QUEUED
- 61 01 00 00 00 00 00 1a e4 8f 38 40 08 01:22:45.396 WRITE FPDMA QUEUED
- Error 41 [16] occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 00 00 00 1a e4 8e 30 40 00 Error: IDNF at LBA = 0x1ae48e30 = 451186224
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 01 00 00 d8 00 00 1a e4 8f 38 40 08 01:22:38.392 WRITE FPDMA QUEUED
- 61 01 00 00 d0 00 00 1a e4 8e 30 40 08 01:22:38.392 WRITE FPDMA QUEUED
- 61 01 00 00 c8 00 00 1a e4 8d 28 40 08 01:22:38.391 WRITE FPDMA QUEUED
- 61 00 80 00 c0 00 00 1a e4 8c a0 40 08 01:22:38.391 WRITE FPDMA QUEUED
- 61 00 08 00 b8 00 00 28 d5 6b 40 40 08 01:22:38.391 WRITE FPDMA QUEUED
- Error 40 [15] occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 10 -- 51 00 00 00 00 16 da b1 80 40 00 Error: IDNF at LBA = 0x16dab180 = 383431040
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 10 00 00 00 01 d1 c0 76 10 40 08 01:22:25.526 READ FPDMA QUEUED
- 60 00 10 00 e0 00 01 d1 c0 74 10 40 08 01:22:25.526 READ FPDMA QUEUED
- 60 00 10 00 d0 00 00 00 00 0a 10 40 08 01:22:25.526 READ FPDMA QUEUED
- 61 01 00 00 80 00 00 16 da b1 80 40 08 01:22:25.526 WRITE FPDMA QUEUED
- 61 01 00 00 50 00 00 16 da b0 78 40 08 01:22:25.526 WRITE FPDMA QUEUED
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed without error 00% 2 -
- # 2 Short offline Completed without error 00% 0 -
- # 3 Conveyance offline Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- Device State: Active (0)
- Current Temperature: 32 Celsius
- Power Cycle Min/Max Temperature: 32/34 Celsius
- Lifetime Min/Max Temperature: 24/35 Celsius
- Under/Over Temperature Limit Count: 0/0
- Vendor specific:
- 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/65 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (183)
- Index Estimated Time Temperature Celsius
- 184 2020-03-25 08:36 ? -
- ... ..(293 skipped). .. -
- 0 2020-03-25 13:30 ? -
- 1 2020-03-25 13:31 24 *****
- 2 2020-03-25 13:32 25 ******
- 3 2020-03-25 13:33 26 *******
- 4 2020-03-25 13:34 27 ********
- 5 2020-03-25 13:35 27 ********
- 6 2020-03-25 13:36 28 *********
- 7 2020-03-25 13:37 28 *********
- 8 2020-03-25 13:38 28 *********
- 9 2020-03-25 13:39 29 **********
- 10 2020-03-25 13:40 29 **********
- 11 2020-03-25 13:41 29 **********
- 12 2020-03-25 13:42 30 ***********
- ... ..( 2 skipped). .. ***********
- 15 2020-03-25 13:45 30 ***********
- 16 2020-03-25 13:46 31 ************
- ... ..( 3 skipped). .. ************
- 20 2020-03-25 13:50 31 ************
- 21 2020-03-25 13:51 32 *************
- ... ..( 5 skipped). .. *************
- 27 2020-03-25 13:57 32 *************
- 28 2020-03-25 13:58 33 **************
- ... ..( 10 skipped). .. **************
- 39 2020-03-25 14:09 33 **************
- 40 2020-03-25 14:10 34 ***************
- ... ..( 31 skipped). .. ***************
- 72 2020-03-25 14:42 34 ***************
- 73 2020-03-25 14:43 33 **************
- ... ..( 36 skipped). .. **************
- 110 2020-03-25 15:20 33 **************
- 111 2020-03-25 15:21 34 ***************
- ... ..( 10 skipped). .. ***************
- 122 2020-03-25 15:32 34 ***************
- 123 2020-03-25 15:33 35 ****************
- ... ..( 29 skipped). .. ****************
- 153 2020-03-25 16:03 35 ****************
- 154 2020-03-25 16:04 ? -
- 155 2020-03-25 16:05 34 ***************
- 156 2020-03-25 16:06 33 **************
- ... ..( 7 skipped). .. **************
- 164 2020-03-25 16:14 33 **************
- 165 2020-03-25 16:15 32 *************
- ... ..( 17 skipped). .. *************
- 183 2020-03-25 16:33 32 *************
- SCT Error Recovery Control:
- Read: 70 (7.0 seconds)
- Write: 70 (7.0 seconds)
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Flags Description
- 0x01 ===== = = === == General Statistics (rev 1) ==
- 0x01 0x008 4 2 --- Lifetime Power-On Resets
- 0x01 0x010 4 3 --- Power-on Hours
- 0x01 0x018 6 902667919 --- Logical Sectors Written
- 0x01 0x020 6 4605028 --- Number of Write Commands
- 0x01 0x028 6 128215 --- Logical Sectors Read
- 0x01 0x030 6 2385 --- Number of Read Commands
- 0x01 0x038 6 10800000 --- Date and Time TimeStamp
- 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
- 0x03 0x008 4 3 --- Spindle Motor Power-on Hours
- 0x03 0x010 4 3 --- Head Flying Hours
- 0x03 0x018 4 2 --- Head Load Events
- 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
- 0x03 0x028 4 0 --- Read Recovery Attempts
- 0x03 0x030 4 0 --- Number of Mechanical Start Failures
- 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
- 0x03 0x040 4 0 --- Number of High Priority Unload Events
- 0x04 ===== = = === == General Errors Statistics (rev 1) ==
- 0x04 0x008 4 47 --- Number of Reported Uncorrectable Errors
- 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
- 0x05 ===== = = === == Temperature Statistics (rev 1) ==
- 0x05 0x008 1 32 --- Current Temperature
- 0x05 0x010 1 - --- Average Short Term Temperature
- 0x05 0x018 1 - --- Average Long Term Temperature
- 0x05 0x020 1 35 --- Highest Temperature
- 0x05 0x028 1 29 --- Lowest Temperature
- 0x05 0x030 1 - --- Highest Average Short Term Temperature
- 0x05 0x038 1 - --- Lowest Average Short Term Temperature
- 0x05 0x040 1 - --- Highest Average Long Term Temperature
- 0x05 0x048 1 - --- Lowest Average Long Term Temperature
- 0x05 0x050 4 0 --- Time in Over-Temperature
- 0x05 0x058 1 65 --- Specified Maximum Operating Temperature
- 0x05 0x060 4 0 --- Time in Under-Temperature
- 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
- 0x06 ===== = = === == Transport Statistics (rev 1) ==
- 0x06 0x008 4 12 --- Number of Hardware Resets
- 0x06 0x010 4 6 --- Number of ASR Events
- 0x06 0x018 4 0 --- Number of Interface CRC Errors
- 0xff ===== = = === == Vendor Specific Statistics (rev 1) ==
- 0xff 0x008 7 0 --- Vendor Specific
- 0xff 0x010 7 0 --- Vendor Specific
- 0xff 0x018 7 0 --- Vendor Specific
- |||_ C monitored condition met
- ||__ D supports DSN
- |___ N normalized value
- Pending Defects log (GP Log 0x0c)
- No Defects Logged
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000d 2 0 Non-CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 1780 Vendor specific
- ------------------------------------------------------------------------------------------------
- Some kernel error messages:
- Mar 25 12:42:14 storage kernel: ata2.00: cmd 61/80:80:48:b3:97/00:00:3c:00:00/40 tag 16 ncq dma 65536 out
- res 41/10:00:48:b3:97/00:00:3c:00:00/00 Emask 0x481 (invalid argument) <F>
- Mar 25 12:42:14 storage kernel: ata2.00: status: { DRDY ERR }
- Mar 25 12:42:14 storage kernel: ata2.00: error: { IDNF }
- Mar 25 12:42:14 storage kernel: ata2.00: configured for UDMA/133
- Mar 25 12:42:14 storage kernel: sd 1:0:0:0: [sdb] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- Mar 25 12:42:14 storage kernel: sd 1:0:0:0: [sdb] tag#16 Sense Key : Illegal Request [current]
- Mar 25 12:42:14 storage kernel: sd 1:0:0:0: [sdb] tag#16 Add. Sense: Logical block address out of range
- Mar 25 12:42:14 storage kernel: sd 1:0:0:0: [sdb] tag#16 CDB: Write(16) 8a 00 00 00 00 00 3c 97 b3 48 00 00 00 80 00 00
- Mar 25 12:42:14 storage kernel: print_req_error: I/O error, dev sdb, sector 1016574792
- Mar 25 12:42:14 storage kernel: zio pool=storage vdev=/dev/disk/by-id/ata-WDC_WD40EFAX-68JH4N0_WD-WX61DC9EHT22-part1 error=5 type=2 offset=520485244928 size=65536 flags=1808aa
- Mar 25 12:42:14 storage kernel: ata2: EH complete
- Mar 25 12:42:21 storage kernel: ata2.00: exception Emask 0x0 SAct 0x40000000 SErr 0x0 action 0x0
- Mar 25 12:42:21 storage kernel: ata2.00: irq_stat 0x40000008
- Mar 25 12:42:21 storage kernel: ata2.00: failed command: WRITE FPDMA QUEUED
- Mar 25 12:42:21 storage kernel: ata2.00: cmd 61/00:f0:40:91:97/01:00:3c:00:00/40 tag 30 ncq dma 131072 out
- res 41/10:00:40:91:97/00:00:3c:00:00/00 Emask 0x481 (invalid argument) <F>
- Mar 25 12:42:21 storage kernel: ata2.00: status: { DRDY ERR }
- Mar 25 12:42:21 storage kernel: ata2.00: error: { IDNF }
- Mar 25 12:42:21 storage kernel: ata2.00: configured for UDMA/133
- Mar 25 12:42:21 storage kernel: sd 1:0:0:0: [sdb] tag#30 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- Mar 25 12:42:21 storage kernel: sd 1:0:0:0: [sdb] tag#30 Sense Key : Illegal Request [current]
- Mar 25 12:42:21 storage kernel: sd 1:0:0:0: [sdb] tag#30 Add. Sense: Logical block address out of range
- Mar 25 12:42:21 storage kernel: sd 1:0:0:0: [sdb] tag#30 CDB: Write(16) 8a 00 00 00 00 00 3c 97 91 40 00 00 01 00 00 00
- Mar 25 12:42:21 storage kernel: print_req_error: I/O error, dev sdb, sector 1016566080
- Mar 25 12:42:21 storage kernel: zio pool=storage vdev=/dev/disk/by-id/ata-WDC_WD40EFAX-68JH4N0_WD-WX61DC9EHT22-part1 error=5 type=2 offset=520480784384 size=131072 flags=40080caa
- Mar 25 12:42:21 storage kernel: ata2: EH complete
- Mar 25 12:42:22 storage sshd[3646580]: error: kex_exchange_identification: Connection closed by remote host
- Mar 25 12:42:29 storage kernel: ata2.00: exception Emask 0x0 SAct 0x8e0 SErr 0x0 action 0x0
- Mar 25 12:42:29 storage kernel: ata2.00: irq_stat 0x40000008
- Mar 25 12:42:29 storage kernel: ata2.00: failed command: WRITE FPDMA QUEUED
- Mar 25 12:42:29 storage kernel: ata2.00: cmd 61/00:28:48:92:97/01:00:3c:00:00/40 tag 5 ncq dma 131072 out
- res 41/10:00:48:92:97/00:00:3c:00:00/00 Emask 0x481 (invalid argument) <F>
- Mar 25 12:42:29 storage kernel: ata2.00: status: { DRDY ERR }
- Mar 25 12:42:29 storage kernel: ata2.00: error: { IDNF }
- Mar 25 12:42:29 storage kernel: ata2.00: configured for UDMA/133
- Mar 25 12:42:29 storage kernel: sd 1:0:0:0: [sdb] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- Mar 25 12:42:29 storage kernel: sd 1:0:0:0: [sdb] tag#5 Sense Key : Illegal Request [current]
- Mar 25 12:42:29 storage kernel: sd 1:0:0:0: [sdb] tag#5 Add. Sense: Logical block address out of range
- Mar 25 12:42:29 storage kernel: sd 1:0:0:0: [sdb] tag#5 CDB: Write(16) 8a 00 00 00 00 00 3c 97 92 48 00 00 01 00 00 00
- Mar 25 12:42:29 storage kernel: print_req_error: I/O error, dev sdb, sector 1016566344
- Mar 25 12:42:29 storage kernel: zio pool=storage vdev=/dev/disk/by-id/ata-WDC_WD40EFAX-68JH4N0_WD-WX61DC9EHT22-part1 error=5 type=2 offset=520480919552 size=131072 flags=40080caa
- Mar 25 12:42:29 storage kernel: ata2: EH complete
- Mar 25 12:42:35 storage dhcpcd[446]: if_sendnetlink: NETLINK_GET_STRICT_CHK: Protocol not available
- Mar 25 12:42:44 storage kernel: ata2.00: exception Emask 0x0 SAct 0xc0000 SErr 0x0 action 0x0
- Mar 25 12:42:44 storage kernel: ata2.00: irq_stat 0x40000008
- Mar 25 12:42:44 storage kernel: ata2.00: failed command: WRITE FPDMA QUEUED
- Mar 25 12:42:44 storage kernel: ata2.00: cmd 61/80:90:d8:f6:a5/00:00:42:00:00/40 tag 18 ncq dma 65536 out
- res 41/10:00:d8:f6:a5/00:00:42:00:00/00 Emask 0x481 (invalid argument) <F>
- Mar 25 12:42:44 storage kernel: ata2.00: status: { DRDY ERR }
- Mar 25 12:42:44 storage kernel: ata2.00: error: { IDNF }
- Mar 25 12:42:44 storage kernel: ata2.00: configured for UDMA/133
- Mar 25 12:42:44 storage kernel: sd 1:0:0:0: [sdb] tag#18 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- Mar 25 12:42:44 storage kernel: sd 1:0:0:0: [sdb] tag#18 Sense Key : Illegal Request [current]
- Mar 25 12:42:44 storage kernel: sd 1:0:0:0: [sdb] tag#18 Add. Sense: Logical block address out of range
- Mar 25 12:42:44 storage kernel: sd 1:0:0:0: [sdb] tag#18 CDB: Write(16) 8a 00 00 00 00 00 42 a5 f6 d8 00 00 00 80 00 00
- Mar 25 12:42:44 storage kernel: print_req_error: I/O error, dev sdb, sector 1118172888
- Mar 25 12:42:44 storage kernel: zio pool=storage vdev=/dev/disk/by-id/ata-WDC_WD40EFAX-68JH4N0_WD-WX61DC9EHT22-part1 error=5 type=2 offset=572503470080 size=65536 flags=1808aa
- Mar 25 12:42:44 storage kernel: ata2: EH complete
- Mar 25 12:42:51 storage kernel: ata2.00: exception Emask 0x0 SAct 0x4000000 SErr 0x0 action 0x0
- Mar 25 12:42:51 storage kernel: ata2.00: irq_stat 0x40000008
- Mar 25 12:42:51 storage kernel: ata2.00: failed command: WRITE FPDMA QUEUED
- Mar 25 12:42:51 storage kernel: ata2.00: cmd 61/00:d0:68:f8:a5/01:00:42:00:00/40 tag 26 ncq dma 131072 out
- res 41/10:00:68:f8:a5/00:00:42:00:00/00 Emask 0x481 (invalid argument) <F>
- Mar 25 12:42:51 storage kernel: ata2.00: status: { DRDY ERR }
- Mar 25 12:42:51 storage kernel: ata2.00: error: { IDNF }
- Mar 25 12:42:51 storage kernel: ata2.00: configured for UDMA/133
- Mar 25 12:42:51 storage kernel: sd 1:0:0:0: [sdb] tag#26 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
- Mar 25 12:42:51 storage kernel: sd 1:0:0:0: [sdb] tag#26 Sense Key : Illegal Request [current]
- Mar 25 12:42:51 storage kernel: sd 1:0:0:0: [sdb] tag#26 Add. Sense: Logical block address out of range
- Mar 25 12:42:51 storage kernel: sd 1:0:0:0: [sdb] tag#26 CDB: Write(16) 8a 00 00 00 00 00 42 a5 f8 68 00 00 01 00 00 00
- Mar 25 12:42:51 storage kernel: print_req_error: I/O error, dev sdb, sector 1118173288
- Mar 25 12:42:51 storage kernel: zio pool=storage vdev=/dev/disk/by-id/ata-WDC_WD40EFAX-68JH4N0_WD-WX61DC9EHT22-part1 error=5 type=2 offset=572503674880 size=131072 flags=40080caa
- Mar 25 12:42:51 storage kernel: ata2: EH complete
- Mar 25 12:43:05 storage kernel: ata2.00: exception Emask 0x0 SAct 0x30000000 SErr 0x0 action 0x0
- Mar 25 12:43:05 storage kernel: ata2.00: irq_stat 0x40000008
- Mar 25 12:43:05 storage kernel: ata2.00: failed command: WRITE FPDMA QUEUED
- Mar 25 12:43:05 storage kernel: ata2.00: cmd 61/80:e0:18:08:a9/00:00:3b:00:00/40 tag 28 ncq dma 65536 out
- res 41/10:00:18:08:a9/00:00:3b:00:00/00 Emask 0x481 (invalid argument) <F>
- Mar 25 12:43:05 storage kernel: ata2.00: status: { DRDY ERR }
- Mar 25 12:43:05 storage kernel: ata2.00: error: { IDNF }
- Mar 25 12:43:05 storage kernel: ata2.00: configured for UDMA/133
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement