Public Pastes
daily pastebin goal
1%
SHARE
TWEET

MariaB

a guest Jan 12th, 2015 163 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. smartctl 6.0 2012-10-10 r3643 [i686-linux-3.5.6-pmagic] (local build)
  2. Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Seagate Barracuda 7200.14 (AF)
  6. Device Model:     ST2000DM001-9YN164
  7. Serial Number:    S1E0F5DC
  8. LU WWN Device Id: 5 000c50 051032016
  9. Firmware Version: CC4B
  10. User Capacity:    2,000,398,934,016 bytes [2.00 TB]
  11. Sector Sizes:     512 bytes logical, 4096 bytes physical
  12. Rotation Rate:    7200 rpm
  13. Device is:        In smartctl database [for details use: -P show]
  14. ATA Version is:   ATA8-ACS T13/1699-D revision 4
  15. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  16. Local Time is:    Sat Jan 10 10:44:23 2015 UTC
  17.  
  18. ==> WARNING: A firmware update for this drive may be available,
  19. see the following Seagate web pages:
  20. http://knowledge.seagate.com/articles/en_US/FAQ/207931en
  21. http://knowledge.seagate.com/articles/en_US/FAQ/223651en
  22.  
  23. SMART support is: Available - device has SMART capability.
  24. SMART support is: Enabled
  25.  
  26. === START OF READ SMART DATA SECTION ===
  27. SMART overall-health self-assessment test result: PASSED
  28.  
  29. General SMART Values:
  30. Offline data collection status:  (0x00) Offline data collection activity
  31.                                         was never started.
  32.                                         Auto Offline Data Collection: Disabled.
  33. Self-test execution status:      ( 121) The previous self-test completed having
  34.                                         the read element of the test failed.
  35. Total time to complete Offline
  36. data collection:                (  575) seconds.
  37. Offline data collection
  38. capabilities:                    (0x73) SMART execute Offline immediate.
  39.                                         Auto Offline data collection on/off support.
  40.                                         Suspend Offline collection upon new
  41.                                         command.
  42.                                         No Offline surface scan supported.
  43.                                         Self-test supported.
  44.                                         Conveyance Self-test supported.
  45.                                         Selective Self-test supported.
  46. SMART capabilities:            (0x0003) Saves SMART data before entering
  47.                                         power-saving mode.
  48.                                         Supports SMART auto save timer.
  49. Error logging capability:        (0x01) Error logging supported.
  50.                                         General Purpose Logging supported.
  51. Short self-test routine
  52. recommended polling time:        (   1) minutes.
  53. Extended self-test routine
  54. recommended polling time:        ( 225) minutes.
  55. Conveyance self-test routine
  56. recommended polling time:        (   2) minutes.
  57. SCT capabilities:              (0x3085) SCT Status supported.
  58.  
  59. SMART Attributes Data Structure revision number: 10
  60. Vendor Specific SMART Attributes with Thresholds:
  61. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  62.   1 Raw_Read_Error_Rate     0x000f   086   085   006    Pre-fail  Always       -       118700810
  63.   3 Spin_Up_Time            0x0003   095   094   000    Pre-fail  Always       -       0
  64.   4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1252
  65.   5 Reallocated_Sector_Ct   0x0033   064   064   036    Pre-fail  Always       -       47904
  66.   7 Seek_Error_Rate         0x000f   053   053   030    Pre-fail  Always       -       4419750482279
  67.   9 Power_On_Hours          0x0032   081   081   000    Old_age   Always       -       16781
  68.  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
  69.  12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       111
  70. 183 Runtime_Bad_Block       0x0032   095   095   000    Old_age   Always       -       5
  71. 184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
  72. 187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       1044
  73. 188 Command_Timeout         0x0032   097   001   000    Old_age   Always       -       4 4 281
  74. 189 High_Fly_Writes         0x003a   081   081   000    Old_age   Always       -       19
  75. 190 Airflow_Temperature_Cel 0x0022   066   055   045    Old_age   Always       -       34 (Min/Max 34/35)
  76. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
  77. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       68
  78. 193 Load_Cycle_Count        0x0032   072   072   000    Old_age   Always       -       57676
  79. 194 Temperature_Celsius     0x0022   034   045   000    Old_age   Always       -       34 (0 22 0 0 0)
  80. 197 Current_Pending_Sector  0x0012   077   001   000    Old_age   Always       -       3792
  81. 198 Offline_Uncorrectable   0x0010   077   001   000    Old_age   Offline      -       3792
  82. 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       21
  83. 240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       9354h+17m+52.612s
  84. 241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       215403670480632
  85. 242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       87350513517955
  86.  
  87. SMART Error Log Version: 1
  88. ATA Error Count: 999 (device log contains only the most recent five errors)
  89.         CR = Command Register [HEX]
  90.         FR = Features Register [HEX]
  91.         SC = Sector Count Register [HEX]
  92.         SN = Sector Number Register [HEX]
  93.         CL = Cylinder Low Register [HEX]
  94.         CH = Cylinder High Register [HEX]
  95.         DH = Device/Head Register [HEX]
  96.         DC = Device Command Register [HEX]
  97.         ER = Error register [HEX]
  98.         ST = Status register [HEX]
  99. Powered_Up_Time is measured from power on, and printed as
  100. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  101. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  102.  
  103. Error 999 occurred at disk power-on lifetime: 16780 hours (699 days + 4 hours)
  104.   When the command that caused the error occurred, the device was active or idle.
  105.  
  106.   After command completion occurred, registers were:
  107.   ER ST SC SN CL CH DH
  108.   -- -- -- -- -- -- --
  109.   40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455
  110.  
  111.   Commands leading to the command that caused the error were:
  112.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  113.   -- -- -- -- -- -- -- --  ----------------  --------------------
  114.   60 00 20 ff ff ff 4f 00      00:03:03.885  READ FPDMA QUEUED
  115.   60 00 20 ff ff ff 4f 00      00:03:03.885  READ FPDMA QUEUED
  116.   60 00 20 ff ff ff 4f 00      00:03:03.885  READ FPDMA QUEUED
  117.   60 00 20 ff ff ff 4f 00      00:03:03.885  READ FPDMA QUEUED
  118.   60 00 20 ff ff ff 4f 00      00:03:03.885  READ FPDMA QUEUED
  119.  
  120. Error 998 occurred at disk power-on lifetime: 16780 hours (699 days + 4 hours)
  121.   When the command that caused the error occurred, the device was active or idle.
  122.  
  123.   After command completion occurred, registers were:
  124.   ER ST SC SN CL CH DH
  125.   -- -- -- -- -- -- --
  126.   40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455
  127.  
  128.   Commands leading to the command that caused the error were:
  129.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  130.   -- -- -- -- -- -- -- --  ----------------  --------------------
  131.   60 00 01 ff ff ff 4f 00      00:02:09.623  READ FPDMA QUEUED
  132.   61 00 02 ff ff ff 4f 00      00:02:09.623  WRITE FPDMA QUEUED
  133.   60 00 20 ff ff ff 4f 00      00:02:09.623  READ FPDMA QUEUED
  134.   60 00 20 ff ff ff 4f 00      00:02:09.623  READ FPDMA QUEUED
  135.   60 00 20 ff ff ff 4f 00      00:02:09.623  READ FPDMA QUEUED
  136.  
  137. Error 997 occurred at disk power-on lifetime: 16780 hours (699 days + 4 hours)
  138.   When the command that caused the error occurred, the device was active or idle.
  139.  
  140.   After command completion occurred, registers were:
  141.   ER ST SC SN CL CH DH
  142.   -- -- -- -- -- -- --
  143.   40 51 00 ff ff ff 0f  Error: WP at LBA = 0x0fffffff = 268435455
  144.  
  145.   Commands leading to the command that caused the error were:
  146.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  147.   -- -- -- -- -- -- -- --  ----------------  --------------------
  148.   61 00 02 ff ff ff 4f 00      00:02:07.457  WRITE FPDMA QUEUED
  149.   60 00 08 28 87 d0 48 00      00:02:06.780  READ FPDMA QUEUED
  150.   60 00 20 ff ff ff 4f 00      00:02:06.752  READ FPDMA QUEUED
  151.   60 00 00 00 72 44 40 00      00:02:06.744  READ FPDMA QUEUED
  152.   60 00 01 ff ff ff 4f 00      00:02:06.701  READ FPDMA QUEUED
  153.  
  154. Error 996 occurred at disk power-on lifetime: 16780 hours (699 days + 4 hours)
  155.   When the command that caused the error occurred, the device was active or idle.
  156.  
  157.   After command completion occurred, registers were:
  158.   ER ST SC SN CL CH DH
  159.   -- -- -- -- -- -- --
  160.   40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455
  161.  
  162.   Commands leading to the command that caused the error were:
  163.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  164.   -- -- -- -- -- -- -- --  ----------------  --------------------
  165.   60 00 20 ff ff ff 4f 00      00:02:03.838  READ FPDMA QUEUED
  166.   60 00 48 ff ff ff 4f 00      00:02:03.823  READ FPDMA QUEUED
  167.   60 00 00 00 71 44 40 00      00:02:03.811  READ FPDMA QUEUED
  168.   61 00 08 ff ff ff 4f 00      00:02:03.799  WRITE FPDMA QUEUED
  169.   60 00 00 00 70 44 40 00      00:02:03.796  READ FPDMA QUEUED
  170.  
  171. Error 995 occurred at disk power-on lifetime: 16780 hours (699 days + 4 hours)
  172.   When the command that caused the error occurred, the device was active or idle.
  173.  
  174.   After command completion occurred, registers were:
  175.   ER ST SC SN CL CH DH
  176.   -- -- -- -- -- -- --
  177.   40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455
  178.  
  179.   Commands leading to the command that caused the error were:
  180.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  181.   -- -- -- -- -- -- -- --  ----------------  --------------------
  182.   60 00 00 00 6d 44 40 00      00:02:00.754  READ FPDMA QUEUED
  183.   60 00 01 ff ff ff 4f 00      00:02:00.736  READ FPDMA QUEUED
  184.   60 00 00 00 6c 44 40 00      00:02:00.727  READ FPDMA QUEUED
  185.   60 00 00 00 6b 44 40 00      00:02:00.725  READ FPDMA QUEUED
  186.   60 00 00 00 6a 44 40 00      00:02:00.724  READ FPDMA QUEUED
  187.  
  188. SMART Self-test log structure revision number 1
  189. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  190. # 1  Short offline       Completed: read failure       90%     16781         1285354648
  191. # 2  Short offline       Completed: read failure       90%     16780         1285354648
  192.  
  193. SMART Selective self-test log data structure revision number 1
  194.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  195.     1        0        0  Not_testing
  196.     2        0        0  Not_testing
  197.     3        0        0  Not_testing
  198.     4        0        0  Not_testing
  199.     5        0        0  Not_testing
  200. Selective self-test flags (0x0):
  201.   After scanning selected spans, do NOT read-scan remainder of disk.
  202. If Selective self-test is pending on power-up, resume after 0 minute delay.
RAW Paste Data
Top