Advertisement
Guest User

Untitled

a guest
Feb 10th, 2021
25
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. CFE> go
  2. Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
  3. Loading: ..... 4796672 bytes read
  4. Entry at 0x00008000
  5. Closing network.
  6. Starting program at 0x00008000
  7. console [ttyS0] enabled, bootconsole disabled
  8. serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
  9. brd: module loaded
  10. loop: module loaded
  11. bcmsflash: squash filesystem found at block 33
  12. sflash size is too small to afford two images.
  13. Creating 8 MTD partitions on "bcmsflash":
  14. 0x000000000000-0x000000040000 : "boot"
  15. 0x000000040000-0x000001ff0000 : "linux"
  16. 0x00000021fd5c-0x000001ff0000 : "rootfs"
  17. 0x000001ff0000-0x000002000000 : "nvram"
  18. 0x000001fe0000-0x000001ff0000 : "save"
  19. 0x000001fd0000-0x000001fe0000 : "ftm"
  20. 0x000000000000-0x000002000000 : "all"
  21. 0x000000000000-0x000002000000 : ""
  22. nflash: found no supported devices
  23. PPP generic driver version 2.4.2
  24. PPP Deflate Compression module registered
  25. PPP BSD Compression module registered
  26. PPP MPPE Compression module registered
  27. NET: Registered protocol family 24
  28. usbcore: registered new interface driver cdc_ether
  29. usbcore: registered new interface driver cdc_eem
  30. usbcore: registered new interface driver rndis_host
  31. usbcore: registered new interface driver cdc_subset
  32. usbcore: registered new interface driver usblp
  33. Netfilter messages via NETLINK v0.30.
  34. nf_conntrack version 0.5.0 (3976 buckets, 15904 max)
  35. NETDETECT target register
  36. xt_time: kernel timezone is -0000
  37. ip_nat_bnet: Trying to register for port 6112
  38. ip_tables: (C) 2000-2006 Netfilter Core Team
  39. TCP cubic registered
  40. Init SKIP Netfilter
  41. Twin IP Module Init
  42. --> Init Smart QoS Monitor
  43. Smart QOS - Create Proc Entry Success
  44. Initializing XFRM netlink socket
  45. NET: Registered protocol family 10
  46. IPv6 over IPv4 tunneling driver
  47. NET: Registered protocol family 17
  48. NET: Registered protocol family 15
  49. L2TP core driver, V2.0
  50. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  51. All bugs added by David S. Miller <davem@redhat.com>
  52. SQUASHFS error: Xattrs in filesystem, these will be ignored
  53. VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  54. devtmpfs: mounted
  55. Freeing init memory: 216K
  56.  
  57. Checking System Requirements *******************************************
  58.  
  59. DRAM SIZE : Requirement->256 Mbytes / Mounted->256 Mbytes -----------> [OK]
  60. FLASH SIZE : Requirement->32 Mbytes / Mounted->32 Mbytes -----------> [OK]
  61.  
  62.  
  63. -->Disable IPV6
  64. alias:a5004ns version:11.004
  65. Magic Fail
  66. Default Configuration
  67. insmod: proxyarp.ko: no module by that name found
  68.  
  69.  
  70.  
  71. =================================================================
  72. press magic key to change default setting ...
  73. LAN MAC : 90:9F:33:65:3B:60
  74. WAN MAC : 90:9F:33:65:3B:61
  75. Bridge Init
  76. eth2: WLC_SET_VAR(ldpc_cap): Operation not supported
  77. device eth2 is not a slave of br0
  78. interface wl1.1 does not exist!
  79. interface wl1.2 does not exist!
  80. interface wl1.3 does not exist!
  81. interface wl1.4 does not exist!
  82. eth2: cmd=231: Invalid argument
  83. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  84. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  85. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  86. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  87. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  88. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  89. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  90. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  91. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  92. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  93. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  94. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  95. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  96. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  97. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  98. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  99. eth2: WLC_SET_VAR(rx_amsdu_in_ampdu): Operation not supported
  100. eth2: WLC_SET_VAR(bg_rate): Operation not supported
  101. eth2: WLC_SET_VAR(a_rate): Operation not supported
  102. eth2: WLC_SET_VAR(bg_rate): Operation not supported
  103. eth2: WLC_SET_VAR(a_rate): Operation not supported
  104. eth2: WLC_SET_VAR(bg_mrate): Operation not supported
  105. eth2: WLC_SET_VAR(a_mrate): Operation not supported
  106. eth2: WLC_SET_VAR(bg_mrate): Operation not supported
  107. eth2: WLC_SET_VAR(a_mrate): Operation not supported
  108. eth2: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported
  109. device eth2 is already a member of a bridge; can't enslave it to bridge br0.
  110. eth2: cmd=51: Invalid argument
  111. eth2: cmd=51: Invalid argument
  112. eth2: cmd=51: Invalid argument
  113. eth2: cmd=51: Invalid argument
  114. eth2: cmd=51: Invalid argument
  115. eth2: cmd=51: Argument list too long
  116. eth2: WLC_SET_VAR(ldpc_cap): Operation not supported
  117. interface wl1.3 does not exist!
  118. interface wl1.4 does not exist!
  119. eth2: cmd=231: Invalid argument
  120. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  121. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  122. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  123. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  124. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  125. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  126. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  127. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  128. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  129. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  130. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  131. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  132. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  133. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  134. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  135. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  136. eth2: WLC_SET_VAR(rx_amsdu_in_ampdu): Operation not supported
  137. eth2: WLC_SET_VAR(bg_rate): Operation not supported
  138. eth2: WLC_SET_VAR(a_rate): Operation not supported
  139. eth2: WLC_SET_VAR(bg_rate): Operation not supported
  140. eth2: WLC_SET_VAR(a_rate): Operation not supported
  141. eth2: WLC_SET_VAR(bg_mrate): Operation not supported
  142. eth2: WLC_SET_VAR(a_mrate): Operation not supported
  143. eth2: WLC_SET_VAR(bg_mrate): Operation not supported
  144. eth2: WLC_SET_VAR(a_mrate): Operation not supported
  145. eth2: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported
  146. device eth2 is already a member of a bridge; can't enslave it to bridge br0.
  147. Vendor ID: 000014e4
  148. Device ID: 000043a9
  149. RadioRev ID: e2057000
  150. Chip Rev : 00000000
  151. CoreRev ID: 0000001e
  152. Board ID : 000005e9
  153. BoardVendor : 000014e4
  154. Board Rev: 00001120
  155. UCode Rev: 038b0075
  156. DRIVER Rev: 06250e6a
  157. ChipNum : 0000a8d1
  158. PhyRev : 00000004
  159. PhyType : 00000011
  160. AnaRev : 00000000
  161. device eth1 is not a slave of br0
  162. interface wl0.1 does not exist!
  163. interface wl0.2 does not exist!
  164. interface wl0.3 does not exist!
  165. interface wl0.4 does not exist!
  166. eth1: cmd=231: Invalid argument
  167. eth1: cmd=142: Invalid argument
  168. eth1: cmd=142: Invalid argument
  169. eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  170. eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  171. eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  172. eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  173. eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  174. eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  175. eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  176. eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  177. eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  178. eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  179. eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  180. eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  181. eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  182. eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  183. eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  184. eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  185. eth1: WLC_SET_VAR(bg_rate): Operation not supported
  186. eth1: WLC_SET_VAR(a_rate): Operation not supported
  187. eth1: WLC_SET_VAR(bg_rate): Operation not supported
  188. eth1: WLC_SET_VAR(a_rate): Operation not supported
  189. eth1: WLC_SET_VAR(bg_mrate): Operation not supported
  190. eth1: WLC_SET_VAR(a_mrate): Operation not supported
  191. eth1: WLC_SET_VAR(bg_mrate): Operation not supported
  192. eth1: WLC_SET_VAR(a_mrate): Operation not supported
  193. eth1: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported
  194. eth1: cmd=64: Operation not supported
  195. device eth1 is already a member of a bridge; can't enslave it to bridge br0.
  196. Vendor ID: 000014e4
  197. Device ID: 000043a9
  198. RadioRev ID: e2057000
  199. Chip Rev : 00000000
  200. CoreRev ID: 0000001e
  201. Board ID : 000005e9
  202. BoardVendor : 000014e4
  203. Board Rev: 00001120
  204. UCode Rev: 038b0075
  205. DRIVER Rev: 06250e6a
  206. ChipNum : 0000a8d1
  207. PhyRev : 00000004
  208. PhyType : 00000011
  209. AnaRev : 00000000
  210. killall: dhcpd.helper: no process killed
  211. eth2:LED GPIO3 1
  212. LED eth2 - lednum:3 , action:1 , polarity:1
  213. eth1:LED GPIO0 1
  214. iptables: No chain/target/match by that name.
  215. Signal ReloadUSB
  216. Initialized Time: 52c2dbf0
  217. Restart HTTPD
  218. Kill httpdkillall: httpd: no process killed
  219. Start httpdkillall: dhcpd: no process killed
  220. killall: bcrelay: no process killed
  221. Can't open /etc/resolv.conf
  222. killall: pptpd: no process killed
  223. iptables: Bad rule (does a matching rule exist in that chain?).
  224. iptables: Bad rule (does a matching rule exist in that chain?).
  225. iptables: Bad rule (does a matching rule exist in that chain?).
  226. iptables: Bad rule (does a matching rule exist in that chain?).
  227. iptables: Bad rule (does a matching rule exist in that chain?).
  228. iptables: Bad rule (does a matching rule exist in that chain?).
  229. killall: xl2tpd: no process killed
  230. Stopping strongSwan IPsec failed: starter is not running
  231. iptables: Bad rule (does a matching rule exist in that chain?).
  232. iptables: Bad rule (does a matching rule exist in that chain?).
  233. iptables: Bad rule (does a matching rule exist in that chain?).
  234. iptables: Bad rule (does a matching rule exist in that chain?).
  235. iptables: Bad rule (does a matching rule exist in that chain?).
  236. iptables: Bad rule (does a matching rule exist in that chain?).
  237. iptables: Bad rule (does a matching rule exist in that chain?).
  238. iptables: Bad rule (does a matching rule exist in that chain?).
  239. iptables: Bad rule (does a matching rule exist in that chain?).
  240. iptables: Bad rule (does a matching rule exist in that chain?).
  241. iptables: Bad rule (does a matching rule exist in that chain?).
  242. iptables: Bad rule (does a matching rule exist in that chain?).
  243. iptables: Bad rule (does a matching rule exist in that chain?).
  244. iptables: Bad rule (does a matching rule exist in that chain?).
  245. killall: nas: no process killed
  246. killall: eapd: no process killed
  247. killall: wps_monitor: no process killed
  248. killall: wps_ap: no process killed
  249. killall: wps_enr: no process killed
  250. eth1: WLC_GET_VAR(psta_if): Invalid argument
  251. eth1: WLC_GET_VAR(psta_if): Invalid argument
  252. eth1: WLC_GET_VAR(psta_if): Invalid argument
  253. eth2: WLC_GET_VAR(psta_if): Invalid argument
  254. eth2: WLC_GET_VAR(psta_if): Invalid argument
  255. eth2: WLC_GET_VAR(psta_if): Invalid argument
  256. wl1.1: WLC_GET_VAR(psta_if): Invalid argument
  257. wl1.1: WLC_GET_VAR(psta_if): Invalid argument
  258. wl1.1: WLC_GET_VAR(psta_if): Invalid argument
  259. No More WDS defined
  260. eth2: cmd=231: Invalid argument
  261. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  262. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  263. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  264. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  265. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  266. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  267. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  268. eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  269. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  270. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  271. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  272. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  273. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  274. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  275. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  276. eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  277. eth2: WLC_SET_VAR(rx_amsdu_in_ampdu): Operation not supported
  278. eth2: WLC_SET_VAR(bg_rate): Operation not supported
  279. eth2: WLC_SET_VAR(a_rate): Operation not supported
  280. eth2: WLC_SET_VAR(bg_rate): Operation not supported
  281. eth2: WLC_SET_VAR(a_rate): Operation not supported
  282. eth2: WLC_SET_VAR(bg_mrate): Operation not supported
  283. eth2: WLC_SET_VAR(a_mrate): Operation not supported
  284. eth2: WLC_SET_VAR(bg_mrate): Operation not supported
  285. eth2: WLC_SET_VAR(a_mrate): Operation not supported
  286. eth2: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported
  287.  
  288. ### wps_wfi_init(): <wl0_wfi_enable=(null)><wl1_wfi_enable=(null)><wl1.1_wfi_enable=(null)>WFI is not enabled ###
  289. new nwcb's nas hwaddr 90:9f:33:66:3b:60
  290. new nwcb's nas hwaddr 92:9f:33:66:3b:61
  291. No More WDS defined
  292. eth1: cmd=231: Invalid argument
  293. eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  294. eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  295. eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  296. eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  297. eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  298. eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  299. eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  300. eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
  301. eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  302. eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  303. eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  304. eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  305. eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  306. eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  307. eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  308. eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
  309. eth1: WLC_SET_VAR(bg_rate): Operation not supported
  310. eth1: WLC_SET_VAR(a_rate): Operation not supported
  311. eth1: WLC_SET_VAR(bg_rate): Operation not supported
  312. eth1: WLC_SET_VAR(a_rate): Operation not supported
  313. eth1: WLC_SET_VAR(bg_mrate): Operation not supported
  314. eth1: WLC_SET_VAR(a_mrate): Operation not supported
  315. eth1: WLC_SET_VAR(bg_mrate): Operation not supported
  316. eth1: WLC_SET_VAR(a_mrate): Operation not supported
  317. eth1: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported
  318. eth1: cmd=64: Operation not supported
  319. killall: bsd: no process killed
  320. SIGNAL -> Config Update signal progress
  321. killall: pppoe-relay: no process killed
  322. SIGNAL -> WAN ip changed
  323. Can't open /etc/resolv.conf
  324. Can't open /etc/resolv.conf
  325. nas_signal_service => mount:sda
  326. nas_callback_service -> add,sda
  327. insmod: ext2.ko: no module by that name found
  328. insmod: jbd.ko: no module by that name found
  329. insmod: ext3.ko: no module by that name found
  330. insmod: fat.ko: no module by that name found
  331. insmod: fuse.ko: no module by that name found
  332. insmod: msdos.ko: no module by that name found
  333. insmod: vfat.ko: no module by that name found
  334. insmod: jbd2.ko: no module by that name found
  335. insmod: ext4dev.ko: no module by that name found
  336. killall: serviced: no process killed
  337. killall: httpd2: no process killed
  338. killall: mysqld: no process killed
  339. killall: nmbd: no process killed
  340. killall: smbd: no process killed
  341. killall: lighttpd_ipdisk: no process killed
  342. killall: proftpd: no process killed
  343. killall: lighttpd: no process killed
  344. killall: rsync: no process killed
  345. killall: transmission-daemon: no process killed
  346. killall: minidlna: no process killed
  347. killall: mt-daapd: no process killed
  348. killall: telnetd: no process killed
  349. killall: telnetd: no process killed
  350. iptables: Bad rule (does a matching rule exist in that chain?).
  351. umount: cannot umount /tmp/cur/proc: No such file or directory
  352. killall: smbd: no process killed
  353. /usr/bin/killall smbd
  354. killall: proftpd: no process killed
  355. /usr/bin/killall proftpd
  356. killall: lighttpd: no process killed
  357. /usr/bin/killall lighttpd
  358. killall: rsync: no process killed
  359. /usr/bin/killall rsync
  360. killall: iptimecloud: no process killed
  361. /usr/bin/killall iptimecloud
  362. killall: transmission-daemon: no process killed
  363. /usr/bin/killall transmission-daemon
  364. killall: minidlna: no process killed
  365. /usr/bin/killall minidlna
  366. killall: mt-daapd: no process killed
  367. /usr/bin/killall mt-daapd
  368. killall: telnetd: no process killed
  369. /usr/bin/killall telnetd
  370. killall: cnid_metad: no process killed
  371. killall: cnid_dbd: no process killed
  372. killall: afpd: no process killed
  373. /usr/bin/killall afpd
  374. signalling WAN IP Changed
  375. =====================> Real Start Serviced
  376. killall: serviced: no process killed
  377. Serviced --> Waiting 30 secs...
  378. nas_callback_service end -> add,sda
  379. nas_signal_service => reloadusb
  380. nas_signal_service => all
  381.  
  382. killall: proftpd: no process killed
  383. signalling START
  384. signalling START
  385.  
  386. killall: smbd: no process killed
  387. killall: nmbd: no process killed
  388. Adding password for in realm ipTIME.
  389.  
  390. killall: lighttpd: no process killed
  391. signalling START
  392.  
  393. killall: rsync: no process killed
  394.  
  395. signalling START
  396.  
  397. killall: iptimecloud: no process killed
  398.  
  399. signalling START
  400.  
  401. killall: transmission-daemon: no process killed
  402.  
  403. signalling START
  404.  
  405. killall: minidlna: no process killed
  406.  
  407.  
  408.  
  409. killall: mt-daapd: no process killed
  410.  
  411.  
  412.  
  413. killall: httpd2: no process killed
  414.  
  415.  
  416. signalling START
  417.  
  418. killall: mysqld: no process killed
  419.  
  420.  
  421. killall: telnetd: no process killed
  422. iptables: Bad rule (does a matching rule exist in that chain?).
  423. umount: cannot umount /tmp/cur/proc: No such file or directory
  424.  
  425. killall: afpd: no process killed
  426. killall: cnid_metad: no process killed
  427. killall: cnid_dbd: no process killed
  428. signalling START
  429. Session Garbage Collecting:Maybe system time is updated.( 1388502010 0 )
  430. Update Session timestamp and try it after 5 seconds again.
  431. ez_ipupdate callback --> time_elapsed: 0
  432. killall: igmpproxy: no process killed
  433. igmpproxy, Version 0.1 beta2, Build 190424
  434. Copyright 2005 by Johnny Egeland <johnny@rlo.org>
  435. Distributed under the GNU GENERAL PUBLIC LICENSE, Version 2 - check GPL.txt
  436.  
  437. iptables: Bad rule (does a matching rule exist in that chain?).
  438. Warn: updateMacTable : 01005e000001
  439. [01005e000001] port map : 0000007f
  440. Led Silent Callback
  441. Turn ON All LED
  442. eth2:LED GPIO3 1
  443. LED eth2 - lednum:3 , action:1 , polarity:1
  444. eth1:LED GPIO0 1
  445. Dynamic Channel Search for eth2 is OFF
  446. Dynamic Channel Search for eth1 is OFF
  447. signalling START
  448. SIGNAL -> WAN ip changed
  449. Can't open /etc/resolv.conf
  450. Can't open /etc/resolv.conf
  451. fuse_callback -----> No Fuse fs. Stop callback
  452. ez_ipupdate callback --> time_elapsed: 4
  453. signalling START
  454. start_signal => upnp:service,D,tcp,21,0,null
  455. start_signal => upnp:service,D,tcp,9000,0,null
  456. start_signal => upnp:service,D,tcp,8000,0,null
  457. start_signal => upnp:service,D,tcp,1873,0,null
  458. start_signal => upnp:service,D,tcp,2873,0,null
  459. start_signal => upnp:service,D,tcp,9091,0,null
  460. start_signal => upnp:service,D,tcp,8080,0,null
  461. start_signal => upnp:service,D,tcp,548,0,null
  462. SIGNAL -> Config Update signal progress
  463. killall: pppoe-relay: no process killed
  464. SIGNAL -> WAN ip changed
  465. Can't open /etc/resolv.conf
  466. Can't open /etc/resolv.conf
  467. no nas_signal : nas_callback
  468. ez_ipupdate callback --> time_elapsed: 1
  469. Led Silent Callback
  470. Turn ON All LED
  471. eth2:LED GPIO3 1
  472. LED eth2 - lednum:3 , action:1 , polarity:1
  473. eth1:LED GPIO0 1
  474. Dynamic Channel Search for eth2 is OFF
  475. Dynamic Channel Search for eth1 is OFF
  476. SIGNAL -> Config Update signal progress
  477. killall: pppoe-relay: no process killed
  478. SIGNAL -> WAN ip changed
  479. Can't open /etc/resolv.conf
  480. Can't open /etc/resolv.conf
  481. no nas_signal : nas_callback
  482. ez_ipupdate callback --> time_elapsed: 2
  483. Led Silent Callback
  484. Turn ON All LED
  485. eth2:LED GPIO3 1
  486. LED eth2 - lednum:3 , action:1 , polarity:1
  487. eth1:LED GPIO0 1
  488. Dynamic Channel Search for eth2 is OFF
  489. Dynamic Channel Search for eth1 is OFF
  490. SIGNAL -> Config Update signal progress
  491. killall: pppoe-relay: no process killed
  492. SIGNAL -> WAN ip changed
  493. Can't open /etc/resolv.conf
  494. Can't open /etc/resolv.conf
  495. no nas_signal : nas_callback
  496. ez_ipupdate callback --> time_elapsed: 1
  497. Led Silent Callback
  498. Turn ON All LED
  499. eth2:LED GPIO3 1
  500. LED eth2 - lednum:3 , action:1 , polarity:1
  501. eth1:LED GPIO0 1
  502. Dynamic Channel Search for eth2 is OFF
  503. Dynamic Channel Search for eth1 is OFF
  504. SIGNAL -> Config Update signal progress
  505. killall: pppoe-relay: no process killed
  506. SIGNAL -> WAN ip changed
  507. Can't open /etc/resolv.conf
  508. Can't open /etc/resolv.conf
  509. no nas_signal : nas_callback
  510. ez_ipupdate callback --> time_elapsed: 1
  511. Led Silent Callback
  512. Turn ON All LED
  513. eth2:LED GPIO3 1
  514. LED eth2 - lednum:3 , action:1 , polarity:1
  515. eth1:LED GPIO0 1
  516. Dynamic Channel Search for eth2 is OFF
  517. Dynamic Channel Search for eth1 is OFF
  518. SIGNAL -> Config Update signal progress
  519. killall: pppoe-relay: no process killed
  520. SIGNAL -> WAN ip changed
  521. Can't open /etc/resolv.conf
  522. Can't open /etc/resolv.conf
  523. no nas_signal : nas_callback
  524. ez_ipupdate callback --> time_elapsed: 1
  525. Led Silent Callback
  526. Turn ON All LED
  527. eth2:LED GPIO3 1
  528. LED eth2 - lednum:3 , action:1 , polarity:1
  529. eth1:LED GPIO0 1
  530. Dynamic Channel Search for eth2 is OFF
  531. Dynamic Channel Search for eth1 is OFF
  532. SIGNAL -> Config Update signal progress
  533. killall: pppoe-relay: no process killed
  534. SIGNAL -> WAN ip changed
  535. Can't open /etc/resolv.conf
  536. Can't open /etc/resolv.conf
  537. no nas_signal : nas_callback
  538. ez_ipupdate callback --> time_elapsed: 1
  539. Led Silent Callback
  540. Turn ON All LED
  541. eth2:LED GPIO3 1
  542. LED eth2 - lednum:3 , action:1 , polarity:1
  543. eth1:LED GPIO0 1
  544. Dynamic Channel Search for eth2 is OFF
  545. Dynamic Channel Search for eth1 is OFF
  546. SIGNAL -> Config Update signal progress
  547. killall: pppoe-relay: no process killed
  548. SIGNAL -> WAN ip changed
  549. Can't open /etc/resolv.conf
  550. Can't open /etc/resolv.conf
  551. no nas_signal : nas_callback
  552. ez_ipupdate callback --> time_elapsed: 1
  553. Led Silent Callback
  554. Turn ON All LED
  555. eth2:LED GPIO3 1
  556. LED eth2 - lednum:3 , action:1 , polarity:1
  557. eth1:LED GPIO0 1
  558. Dynamic Channel Search for eth2 is OFF
  559. Dynamic Channel Search for eth1 is OFF
  560. SIGNAL -> Config Update signal progress
  561. killall: pppoe-relay: no process killed
  562. SIGNAL -> WAN ip changed
  563. Can't open /etc/resolv.conf
  564. Can't open /etc/resolv.conf
  565. no nas_signal : nas_callback
  566. ez_ipupdate callback --> time_elapsed: 1
  567. Led Silent Callback
  568. Turn ON All LED
  569. eth2:LED GPIO3 1
  570. LED eth2 - lednum:3 , action:1 , polarity:1
  571. eth1:LED GPIO0 1
  572. Dynamic Channel Search for eth2 is OFF
  573. Dynamic Channel Search for eth1 is OFF
  574. SIGNAL -> Config Update signal progress
  575. killall: pppoe-relay: no process killed
  576. SIGNAL -> WAN ip changed
  577. Can't open /etc/resolv.conf
  578. Can't open /etc/resolv.conf
  579. no nas_signal : nas_callback
  580. ez_ipupdate callback --> time_elapsed: 1
  581. Led Silent Callback
  582. Turn ON All LED
  583. eth2:LED GPIO3 1
  584. LED eth2 - lednum:3 , action:1 , polarity:1
  585. eth1:LED GPIO0 1
  586. Dynamic Channel Search for eth2 is OFF
  587. Dynamic Channel Search for eth1 is OFF
  588. FirstTime Reload USB Module --> check_usb_reload_case
  589. SIGNAL -> Config Update signal progress
  590. killall: pppoe-relay: no process killed
  591. SIGNAL -> WAN ip changed
  592. Can't open /etc/resolv.conf
  593. Can't open /etc/resolv.conf
  594. no nas_signal : nas_callback
  595. ez_ipupdate callback --> time_elapsed: 1
  596. Led Silent Callback
  597. Turn ON All LED
  598. eth2:LED GPIO3 1
  599. LED eth2 - lednum:3 , action:1 , polarity:1
  600. eth1:LED GPIO0 1
  601. Dynamic Channel Search for eth2 is OFF
  602. Dynamic Channel Search for eth1 is OFF
  603. Serviced --> Start ...
Advertisement
RAW Paste Data Copied
Advertisement